GSoC/kolibrios-nvme-driver
2
0
Fork 0
mirror of https://git.missingno.dev/kolibrios-nvme-driver/ synced 2024-12-22 13:58:47 +01:00
Code Issues 2 Actions Activity
bee583765f
kolibrios-nvme-driver/drivers/nvme/nvme.asm

1523 lines
38 KiB
NASM
Raw Blame History

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2004-2024. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;; GNU GENERAL PUBLIC LICENSE ;;
;; Version 2, June 1991 ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
format PE DLL native
entry START
API_VERSION = 0 ;debug
SRV_GETVERSION = 0
__DEBUG__ = 1
__DEBUG_LEVEL__ = 1
DRIVER_VERSION = 1
DBG_INFO = 1
NULLPTR = 0
FALSE = 0
TRUE = 1
; flags for alloc_dptr
PRP1_ENTRY_ALLOCATED = 1
PRP1_LIST_ALLOCATED = 2
PRP2_ENTRY_ALLOCATED = 4
PRP2_LIST_ALLOCATED = 8
; IOCTL error codes
ENOERR = 0 ; No error
EINVAL_IOCTL = 1 ; unknown IOCTL code, wrong input/output size
EINVAL_ID = 2 ; .DiskId must be from 0-9
ESZTOL = 3 ; .DiskSize too large
ESZTOS = 4 ; .DiskSize too small
ENOMEM = 5 ; failed to allocate memory
section ".flat" code readable writable executable
include "../proc32.inc"
include "../struct.inc"
include "../macros.inc"
include "../fdo.inc"
include "../pci.inc"
include "../peimport.inc"
include "nvme.inc"
include "macros.inc"
include "lib.asm"
struct DISKMEDIAINFO
flags dd ?
sectorsize dd ?
capacity dq ?
ends
proc START c, reason:dword
cmp [reason], DRV_ENTRY
jne .err
.entry:
DEBUGF DBG_INFO, "Detecting NVMe device...\n"
call detect_nvme
test eax, eax
jz .err
mov eax, dword [p_nvme_devices]
test eax, eax
jz .err
xor ecx, ecx
.loop:
mov ebx, dword [p_nvme_devices]
stdcall device_is_compat, ebx
test eax, eax
jz @f
stdcall nvme_init, ebx
test eax, eax
jz .err
;@@:
;inc ecx
;cmp ecx, dword [pcidevs_len]
;jne .loop
stdcall add_nvme_disk, [p_nvme_devices]
test eax, eax
jz .err
invoke RegService, my_service, service_proc
ret
.err:
call nvme_cleanup
xor eax, eax
ret
endp
proc service_proc stdcall, ioctl:dword
mov esi, [ioctl]
mov eax, [esi + IOCTL.io_code]
cmp eax, SRV_GETVERSION
jne .ret
mov eax, [esi + IOCTL.output]
cmp [esi + IOCTL.out_size], 4
jne .ret
mov dword [eax], API_VERSION
xor eax, eax
ret
.ret:
or eax, -1
ret
endp
proc add_nvme_disk stdcall, pci:dword
push esi
mov esi, [pci]
; NOTE: If the pcidev.num or pcidev.nsid is more than 9 then
; this fails to build the string correctly. Ignoring this issue
; for now since who has more than 9 NVMe SSDs on a desktop computer
; and a NSID bigger than 9 is also unlikely.
;
; Still, will address this problem in the future.
push 0 ; null terminator
movzx eax, byte [esi + pcidev.nsid]
add al, "0"
mov byte [esp], al
dec esp
mov byte [esp], "n"
dec esp
movzx eax, byte [esi + pcidev.num]
add al, "0"
mov byte [esp], al
push "nvme"
mov eax, esp
invoke DiskAdd, disk_functions, eax, [esi + pcidev.nsinfo], 0
add esp, 10
test eax, eax
jz @f
invoke DiskMediaChanged, eax, 1
DEBUGF DBG_INFO, "nvme%un%u: Successfully registered disk\n", [esi + pcidev.num], [esi + pcidev.nsid]
xor eax, eax
inc eax
pop esi
ret
@@:
DEBUGF DBG_INFO, "nvme%u: Failed to register disk\n", [esi + pcidev.num]
xor eax, eax
pop esi
ret
endp
proc nvme_query_media stdcall, userdata:dword, info:dword
push ebx esi edi
mov esi, [userdata]
mov ebx, dword [esi + NSINFO.pci]
mov edi, [info]
mov dword [edi + DISKMEDIAINFO.flags], 0
mov cl, byte [esi + NSINFO.lbads]
xor eax, eax
inc eax
shl eax, cl
DEBUGF DBG_INFO, "nvme%un%u (Query Media): Sector size = %u\n", [ebx + pcidev.num], [esi + NSINFO.nsid], eax
mov dword [edi + DISKMEDIAINFO.sectorsize], eax
mov eax, dword [esi + NSINFO.capacity]
mov dword [edi + DISKMEDIAINFO.capacity], eax
mov eax, dword [esi + NSINFO.capacity + 4]
mov dword [edi + DISKMEDIAINFO.capacity + 4], eax
DEBUGF DBG_INFO, "nvme%un%u (Query Media): Capacity = %u + %u sectors\n", [ebx + pcidev.num], [esi + NSINFO.nsid], [esi + NSINFO.capacity], [esi + NSINFO.capacity + 4]
xor eax, eax
pop edi esi ebx
ret
endp
proc set_cdw0 stdcall, pci:dword, y:dword, opcode:byte
stdcall get_new_cid, [pci], [y]
shl eax, 16
or al, [opcode]
ret
endp
; See pages 161-205 of the NVMe 1.4 specification for reference
proc nvme_identify stdcall, pci:dword, nsid:dword, prp1:dword, cns:byte
LOCK_SPINLOCK
sub esp, sizeof.SQ_ENTRY
; It's important to check if CNS is a valid value here. In revision 1.0
; CNS is a 1 bit field and a two bit field in revision 1.1, using invalid
; values results in undefined behavior (see page 162 of NVMe 1.4 spec)
if __DEBUG__
push esi
mov esi, [pci]
mov esi, dword [esi + pcidev.io_addr]
mov eax, dword [esi + NVME_MMIO.VS]
cmp eax, VS110
jne @f
cmp [cns], 11b
jbe .ok
DEBUGF DBG_INFO, "(NVMe) FATAL ERROR: INVALID CNS VALUE ON v1.1.0 CONTROLLERS\n"
jmp .err
@@:
cmp eax, VS100
jne .ok
cmp [cns], 1b
jbe .ok
DEBUGF DBG_INFO, "(NVMe) FATAL ERROR: INVALID CNS VALUE ON v1.0.0 CONTROLLERS\n"
jmp .err
.err:
jmp @b
.ok:
pop esi
end if
stdcall memsetdz, esp, sizeof.SQ_ENTRY / 4
mov eax, [nsid]
mov dword [esp + SQ_ENTRY.nsid], eax
mov eax, [prp1]
mov dword [esp + SQ_ENTRY.prp1], eax
stdcall set_cdw0, [pci], ADMIN_QUEUE, ADM_CMD_IDENTIFY
mov dword [esp + SQ_ENTRY.cdw0], eax
mov al, [cns]
mov byte [esp + SQ_ENTRY.cdw10], al
stdcall sqytdbl_write, [pci], ADMIN_QUEUE, esp
add esp, sizeof.SQ_ENTRY
call nvme_poll
ret
endp
; See pages 348-349 of the NVMe 1.4 specification for information on creating namespaces
proc create_namespace stdcall, pci:dword, cid:word
push esi
invoke AllocPage
test eax, eax
jz .fail
invoke GetPhysAddr
stdcall nvme_identify, [pci], 0xffffffff, eax, CNS_IDNS
test eax, eax
jz .fail
.fail:
pop esi
ret
endp
; returns 1 if the given NSID is a an active NSID, returns
; 0 otherwise
proc is_active_namespace stdcall, pci:dword, nsid:dword
push esi edi
invoke KernelAlloc, 0x1000
test eax, eax
jnz @f
pop edi esi
ret
@@:
mov esi, eax
invoke GetPhysAddr
stdcall nvme_identify, [pci], [nsid], eax, CNS_IDNS
test eax, eax
jz .not_active_nsid
xor ecx, ecx
@@:
mov eax, dword [esi + ecx * 4]
test eax, eax
jnz .is_active_nsid
inc ecx
cmp ecx, 0x1000 / 4
jne @b
.not_active_nsid:
invoke KernelFree, esi
pop edi esi
xor eax, eax
ret
.is_active_nsid:
invoke KernelFree, esi
pop edi esi
xor eax, eax
inc eax
ret
endp
; See page 248 of the NVMe 1.4 specification for reference
; Returns the number of namespaces that are active, note this
; doesn't mean if EAX = 5, then namespaces 1-5 will be active.
; This also sets [pci + pcidev.nn] and [pci + pcidev.nsids]
; to appropriate values
proc determine_active_nsids stdcall, pci:dword
push ebx esi
mov esi, [pci]
xor ebx, ebx
xor ecx, ecx
inc ecx
.loop:
cmp ecx, dword [esi + pcidev.nn]
ja .ret
push ecx
stdcall is_active_namespace, [pci], ecx
pop ecx
test eax, eax
jz .not_active_namespace
mov ebx, ecx
jmp .ret
.not_active_namespace:
inc ecx
jmp .loop
.ret:
pop edi esi
mov eax, ebx
ret
endp
; See page 101 of the NVMe 1.4 specification for reference
proc create_io_completion_queue stdcall, pci:dword, prp1:dword, qid:dword, ien:byte
LOCK_SPINLOCK
sub esp, sizeof.SQ_ENTRY
stdcall memsetdz, esp, sizeof.SQ_ENTRY / 4
stdcall set_cdw0, [pci], ADMIN_QUEUE, ADM_CMD_CRE_IO_COMPLETION_QUEUE
mov dword [esp + SQ_ENTRY.cdw0], eax
mov eax, [prp1]
mov dword [esp + SQ_ENTRY.prp1], eax
mov eax, sizeof.CQ_ENTRY shl 16 ; CDW10.QSIZE
or eax, [qid] ; CDW10.QID
mov dword [esp + SQ_ENTRY.cdw10], eax
movzx eax, [ien] ; CDW11.IEN
or eax, 0x1 ; CDW11.PC
; Don't set CDW11.IV since we're not using MSI-X or MSI vector
mov dword [esp + SQ_ENTRY.cdw11], eax
stdcall sqytdbl_write, [pci], ADMIN_QUEUE, esp
add esp, sizeof.SQ_ENTRY
call nvme_poll
ret
endp
; See page 103-104 of the NVMe 1.4 specification for reference
proc create_io_submission_queue stdcall, pci:dword, prp1:dword, qid:dword, cqid:word
LOCK_SPINLOCK
sub esp, sizeof.SQ_ENTRY
stdcall memsetdz, esp, sizeof.SQ_ENTRY / 4
stdcall set_cdw0, [pci], ADMIN_QUEUE, ADM_CMD_CRE_IO_SUBMISSION_QUEUE
mov dword [esp + SQ_ENTRY.cdw0], eax
mov eax, [prp1]
mov dword [esp + SQ_ENTRY.prp1], eax
mov eax, sizeof.SQ_ENTRY shl 16 ; CDW10.QSIZE
or eax, [qid]
mov dword [esp + SQ_ENTRY.cdw10], eax
movzx eax, [cqid]
shl eax, 16 ; CDW11.CQID
or eax, 0x1 ; CDW11.PC (always set this to 1 as some devices may not support non-contiguous pages)
; TODO: Set CDW10.QPRIO
mov dword [esp + SQ_ENTRY.cdw11], eax
stdcall sqytdbl_write, [pci], ADMIN_QUEUE, esp
add esp, sizeof.SQ_ENTRY
call nvme_poll
ret
endp
; See page 95-96 of the NVMe 1.4 specification for reference
proc abort stdcall, pci:dword, cid:word, sqid:word
sub esp, sizeof.SQ_ENTRY
stdcall memsetdz, esp, sizeof.SQ_ENTRY / 4
stdcall set_cdw0, [pci], ADMIN_QUEUE, ADM_CMD_ABORT
mov dword [esp + SQ_ENTRY.cdw0], eax
movzx eax, [cid]
shl eax, 16
or eax, word [sqid]
mov dword [esp + SQ_ENTRY.cdw10], eax
stdcall sqytdbl_write, [pci], ADMIN_QUEUE, esp
add esp, sizeof.SQ_ENTRY
ret
endp
; See page 205 of the NVMe 1.4 specification for reference
proc set_features stdcall, pci:dword, prp1:dword, fid:byte, cdw11:dword
sub esp, sizeof.SQ_ENTRY
stdcall memsetdz, esp, sizeof.SQ_ENTRY / 4
stdcall set_cdw0, [pci], ADMIN_QUEUE, ADM_CMD_SET_FEATURES
mov dword [esp + SQ_ENTRY.cdw0], eax
mov eax, [prp1]
mov dword [esp + SQ_ENTRY.prp1], eax
movzx eax, [fid]
;or eax, 1 shl 31 ; CDW10.SV
mov dword [esp + SQ_ENTRY.cdw10], eax
mov eax, [cdw11]
mov dword [esp + SQ_ENTRY.cdw11], eax
stdcall sqytdbl_write, [pci], ADMIN_QUEUE, esp
add esp, sizeof.SQ_ENTRY
ret
endp
; See page 105 of the NVMe 1.4 specification for reference
proc delete_io_completion_queue stdcall, pci:dword, qid:word
sub esp, sizeof.SQ_ENTRY
stdcall memsetdz, esp, sizeof.SQ_ENTRY / 4
stdcall set_cdw0, [pci], ADMIN_QUEUE, ADM_CMD_DEL_IO_COMPLETION_QUEUE
mov dword [esp + SQ_ENTRY.cdw0], eax
mov ax, [qid]
mov word [esp + SQ_ENTRY.cdw10], ax
stdcall sqytdbl_write, [pci], ADMIN_QUEUE, esp
add esp, sizeof.SQ_ENTRY
ret
endp
; See page 114-116 of the NVMe 1.4 specification for reference
proc get_features stdcall, pci:dword, prp1:dword, sel:byte, fid:byte
sub esp, sizeof.SQ_ENTRY
stdcall memsetdz, esp, sizeof.SQ_ENTRY / 4
stdcall set_cdw0, [pci], ADMIN_QUEUE, ADM_CMD_GET_FEATURES
mov dword [esp + SQ_ENTRY.cdw0], eax
movzx eax, [sel]
and eax, 111b
shl eax, 8 ; CDW10.SEL
or eax, byte [fid] ; CDW10.FID
mov dword [esp + SQ_ENTRY.cdw10], eax
mov eax, [prp1]
mov dword [esp + SQ_ENTRY.prp1], eax
; TODO: Implement CDW14.UUID?
stdcall sqytdbl_write, [pci], ADMIN_QUEUE, esp
add esp, sizeof.SQ_ENTRY
ret
endp
; See page 105-106 of the NVMe 1.4 specification for reference
proc delete_io_submission_queue stdcall, pci:dword, qid:word
sub esp, sizeof.SQ_ENTRY
stdcall memsetdz, esp, sizeof.SQ_ENTRY / 4
stdcall set_cdw0, [pci], ADMIN_QUEUE, ADM_CMD_DEL_IO_SUBMISSION_QUEUE
mov dword [esp + SQ_ENTRY.cdw0], eax
mov ax, [qid]
mov word [esp + SQ_ENTRY.cdw10], ax
stdcall sqytdbl_write, [pci], ADMIN_QUEUE, esp
add esp, sizeof.SQ_ENTRY
ret
endp
; See page 117-118 of the NVMe 1.4 specification for reference
; INCOMPLETE
proc get_log_page stdcall, pci:dword, prp1:dword, lid:byte
sub esp, sizeof.SQ_ENTRY
stdcall memsetdz, esp, sizeof.SQ_ENTRY / 4
stdcall set_cdw0, [pci], ADMIN_QUEUE, ADM_CMD_GET_LOG_PAGE
mov dword [esp + SQ_ENTRY.cdw0], eax
mov eax, [prp1]
mov dword [esp + SQ_ENTRY.prp1], eax
add esp, sizeof.SQ_ENTRY
ret
endp
proc build_prp_list stdcall, nprps:dword, buf:dword, prp_list_ptr:dword
push esi ebx edi
sub esp, 4
; stack:
; [esp]: virtual pointer to first PRP list
; here, we store the pointer to the very first
; PRP list so that free_prp_list can free the
; entire PRP list if something goes wrong, it
; also serves as our return value placeholder
mov dword [esp], 0
xor edi, edi
xor esi, esi
mov ecx, [nprps]
shl ecx, 3 ; multiply by 8 since each PRP pointer is a QWORD
; we'll store consecutive PRP list buffers here, for example
; given 2 PRP lists, we allocate 2 continuous pages
push ecx
invoke KernelAlloc, ecx ; store pointers to the PRP entries here
pop ecx
test eax, eax
jz .err
mov dword [esp], eax
mov edi, eax
mov eax, [prp_list_ptr]
mov dword [eax], edi
shr ecx, 1
stdcall memsetdz, edi, ecx
; note we assume buf is page-aligned
mov esi, [buf]
.build_prp_list:
; ensure we don't cross a page boundary
mov ebx, [nprps]
cmp ebx, PAGE_SIZE / 8
jb @f
mov ebx, PAGE_SIZE / 8
sub [nprps], ebx
@@:
xor ecx, ecx
cmp dword [esp], edi
je .loop
; we need to store the pointer of the next
; PRP list to the previous PRP list last entry
mov eax, edi
invoke GetPhysAddr
mov dword [edi - 8], eax
mov dword [edi - 4], 0
.loop:
mov eax, esi
invoke GetPhysAddr
mov dword [edi + ecx * 8], eax
mov dword [edi + ecx * 8 - 4], 0
add esi, PAGE_SIZE
inc ecx
cmp ecx, ebx
jne .loop
; check if we we need to build another PRP list
add edi, PAGE_SIZE
cmp ebx, PAGE_SIZE / 8
je .build_prp_list
; PRP list successfully created
mov eax, dword [esp]
invoke GetPhysAddr
add esp, 4
pop edi ebx esi
ret
.err:
add esp, 4
pop edi ebx esi
xor eax, eax
ret
endp
proc alloc_dptr stdcall, ns:dword, prps_ptr:dword, numsectors:dword, prp_list_ptr:dword, buf:dword
push ebx esi edi
mov esi, [ns]
mov edi, [prps_ptr]
mov eax, [buf]
invoke GetPhysAddr
mov dword [edi], eax
mov cl, byte [esi + NSINFO.lbads]
mov ebx, PAGE_SIZE
shr ebx, cl
mov edx, [numsectors]
; is the buffer offset portion equal to 0?
mov eax, [buf]
mov ecx, eax
and eax, PAGE_SIZE - 1
jnz @f
; is the number of sectors less than or equal to one memory page?
cmp edx, ebx
jbe .success
shl ebx, 1 ; it is page aligned, so set ebx to 2 memory pages
@@:
; is the number of sectors greater than one or two memory pages?
cmp edx, ebx
ja .build_prp_list
; set PRP2
mov eax, ecx
and eax, not (PAGE_SIZE - 1)
add eax, PAGE_SIZE
invoke GetPhysAddr
mov dword [edi + 4], eax
jmp .success
.build_prp_list:
xchg ecx, ebx
and ebx, not (PAGE_SIZE - 1)
add ebx, PAGE_SIZE
mov eax, [numsectors]
mov ecx, ebx
xor edx, edx
div ecx
stdcall build_prp_list, eax, ebx, [prp_list_ptr]
test eax, eax
jz .err
mov dword [edi + 4], eax
.success:
xor eax, eax
inc eax
pop edi esi ebx
ret
.err:
xor eax, eax
pop edi esi ebx
ret
endp
nvme_read:
mov edx, NVM_CMD_READ
jmp nvme_readwrite
nvme_write:
mov edx, NVM_CMD_WRITE
proc nvme_readwrite stdcall, ns:dword, buf:dword, start_sector:qword, numsectors_ptr:dword
push ebx esi edi
sub esp, 20
; TODO: check if numsectors exceeds IDENTC.MDTS?
; stack:
; [esp] - PRP1
; [esp + 4] - PRP2
; [esp + 8] - command type (read or write)
; [esp + 12] - original numsectors value
; [esp + 16] - virtual pointer to PRP2 PRP list (if allocated, 0 if not)
mov ebx, esp
mov esi, [ns]
mov edi, [buf]
mov eax, [numsectors_ptr]
mov eax, dword [eax]
DEBUGF DBG_INFO, "buf: %x, start_sector: %u:%u, numsectors: %u\n", [buf], [start_sector + 4], [start_sector], eax
mov dword [ebx + 4], 0 ; PRP2 entry (0 by default)
mov dword [ebx + 8], edx ; command type (read or write)
mov dword [ebx + 12], eax ; save original numsectors value
mov dword [ebx + 16], 0 ; virtual pointer to PRP2 PRP list (not allocated by default)
mov ecx, ebx
add ecx, 16
; Note that [esp] will contain the value of PRP1 and [esp + 4] will
; contain the value of PRP2. If PRP2 is a PRP list, then [esp + 16] will point
; to the allocated PRP list (after this call, only if it completes successfully)
stdcall alloc_dptr, esi, ebx, eax, ecx, [buf]
test eax, eax
jz .fail
DEBUGF DBG_INFO, "PRP1: %x, PRP2: %x\n", [ebx], [ebx + 4]
mov eax, dword [start_sector]
; According to the NVMe specification, the NLB field in the I/O read and write
; commands is a 0-based value (i.e., 0 is equivalant to 1, 1 is equivalant to 2, ...)
; As far as I know, KolibriOS doesn't follow this mechanism so let's just decrement the
; value and it should have the same effect.
mov ecx, dword [ebx + 12]
dec ecx
; TODO: add non-blocking mechanisms later on
LOCK_SPINLOCK
stdcall nvme_io_rw, [esi + NSINFO.pci], \
1, \
[esi + NSINFO.nsid], \
dword [ebx], \
dword [ebx + 4], \
eax, \
dword [start_sector + 4], \
ecx, \
dword [ebx + 8]
; free PRP list (if allocated)
mov edx, dword [ebx + 16]
test edx, edx
jz @f
invoke KernelFree, edx
@@:
call nvme_poll
test eax, eax
jz .fail
xor eax, eax
add esp, 20
pop edi esi ebx
ret
.fail:
mov ebx, [numsectors_ptr]
mov dword [ebx], 0
or eax, -1 ; generic disk error
endp
; See page 258-261 (read) and 269-271 (write) of the NVMe 1.4 specification for reference
proc nvme_io_rw stdcall, pci:dword, qid:word, nsid:dword, prps:qword, slba:qword, nlb:dword, opcode:dword
; TODO: Use IDENTC.NOIOB to construct read/write commands that don't
; cross the I/O boundary to achieve optimal performance
;
; TODO: Read AWUN/NAWUN
sub esp, sizeof.SQ_ENTRY
stdcall memsetdz, esp, sizeof.SQ_ENTRY / 4
movzx ecx, [qid]
stdcall set_cdw0, [pci], ecx, [opcode]
mov dword [esp + SQ_ENTRY.cdw0], eax ; CDW0
mov eax, dword [prps]
mov dword [esp + SQ_ENTRY.prp1], eax
mov eax, dword [prps + 4]
mov dword [esp + SQ_ENTRY.prp2], eax
mov eax, [nsid]
mov dword [esp + SQ_ENTRY.nsid], eax
mov eax, dword [slba] ; slba_lo
mov dword [esp + SQ_ENTRY.cdw10], eax
mov eax, dword [slba + 4] ; slba_hi
mov dword [esp + SQ_ENTRY.cdw11], eax
mov eax, [nlb]
mov word [esp + SQ_ENTRY.cdw12], ax
movzx ecx, [qid]
stdcall sqytdbl_write, [pci], ecx, esp
add esp, sizeof.SQ_ENTRY
ret
endp
proc detect_nvme
invoke GetPCIList
mov edx, eax
.check_dev:
mov ebx, dword [eax + PCIDEV.class]
and ebx, 0x00ffff00 ; retrieve class/subclass code only
cmp ebx, 0x00010800 ; Mass Storage Controller - Non-Volatile Memory Controller
je .found_dev
.next_dev:
mov eax, dword [eax + PCIDEV.fd]
cmp eax, edx
jne .check_dev
jmp .exit_success
.found_dev:
push edx eax
;PDEBUGF DBG_INFO, "PCI(%u.%u.%u): Detected NVMe device...\n", byte [eax + PCIDEV.bus], byte [eax + PCIDEV.devfn]
cmp dword [pcidevs_len], TOTAL_PCIDEVS
jne @f
pop eax edx
jmp .exit_success
@@:
inc dword [pcidevs_len]
mov ebx, dword [p_nvme_devices]
test ebx, ebx
jnz @f
invoke KernelAlloc, sizeof.pcidev
test eax, eax
jz .err_no_mem
mov dword [p_nvme_devices], eax
;DEBUGF DBG_INFO, "(NVMe) Allocated pcidev struct at 0x%x\n", [p_nvme_devices]
@@:
mov ecx, dword [pcidevs_len]
dec ecx
pop eax
mov ebx, dword [p_nvme_devices]
movzx edx, byte [eax + PCIDEV.bus]
mov byte [ebx + pcidev.bus], dl
movzx edx, byte [eax + PCIDEV.devfn]
mov byte [ebx + pcidev.devfn], dl
mov dword [ebx + pcidev.num], ecx
pop edx
jmp .next_dev
.err_no_mem:
pop eax edx
xor eax, eax
ret
.exit_success:
xor eax, eax
inc eax
ret
endp
proc device_is_compat stdcall, pci:dword
push esi edx ecx
mov esi, [pci]
invoke PciRead8, dword [esi + pcidev.bus], dword [esi + pcidev.devfn], PCI_header00.interrupt_line
mov byte [esi + pcidev.iline], al
invoke PciRead32, dword [esi + pcidev.bus], dword [esi + pcidev.devfn], PCI_header00.base_addr_0
and eax, 0xfffffff0
test eax, eax
jz .failure
mov edx, eax
push edx
invoke MapIoMem, eax, sizeof.NVME_MMIO, PG_SW+PG_NOCACHE
test eax, eax
jz .failure
;DEBUGF DBG_INFO, "(NVMe) MMIO allocated at: 0x%x\n", eax
mov dword [esi + pcidev.io_addr], eax
mov eax, dword [eax + NVME_MMIO.CAP + 4]
and eax, CAP_DSTRD
mov byte [esi + pcidev.dstrd], al
; 1003h + ((2y + 1) * (4 << CAP.DSTRD))
mov eax, 4
shl ax, cl
mov ecx, NVM_ASQS
shl ecx, 1
inc ecx
imul ecx, eax
add ecx, 0x1003
pop edx
invoke MapIoMem, edx, ecx, PG_SW+PG_NOCACHE
mov dword [esi + pcidev.io_addr], eax
mov eax, dword [eax + NVME_MMIO.VS]
DEBUGF DBG_INFO, "nvme%u: Controller version: 0x%x\n", [esi + pcidev.num], eax
mov dword [esi + pcidev.version], eax
pop ecx edx esi
xor eax, eax
inc eax
ret
.failure:
PDEBUGF DBG_INFO, "PCI(%u.%u.%u): something went wrong checking NVMe device compatibility\n", byte [esi + pcidev.bus], byte [esi + pcidev.devfn]
pop ecx edx esi
xor eax, eax
ret
endp
; nvme_init: Initializes the NVMe controller
proc nvme_init stdcall, pci:dword
push ebx esi edi
mov esi, dword [pci]
; Check the PCI header to see if interrupts are disabled, if so
; we have to re-enable them
invoke PciRead16, dword [esi + pcidev.bus], dword [esi + pcidev.devfn], PCI_header00.command
and eax, not (1 shl 10)
invoke PciWrite16, dword [esi + pcidev.bus], dword [esi + pcidev.devfn], PCI_header00.command, eax
; Check if the device has a pointer to the capabilities list (status register bit 4 set to 1)
; though this check is probably unnecessary since all PCIe devices should have this bit set to 1
invoke PciRead16, dword [esi + pcidev.bus], dword [esi + pcidev.devfn], PCI_header00.status
test ax, (1 shl 4)
jz .exit_fail
invoke PciRead8, dword [esi + pcidev.bus], dword [esi + pcidev.devfn], PCI_header00.cap_ptr
and eax, 0xfc ; bottom two bits are reserved, so mask them before we access the configuration space
mov edi, eax
DEBUGF DBG_INFO, "nvme%u: Checking capabilities: %x\n", [esi + pcidev.num], edi
; We need to check if there are any MSI/MSI-X capabilities, and if so, make sure they're disabled since
; we're using old fashioned pin-based interrupts (for now)
.read_cap:
invoke PciRead32, dword [esi + pcidev.bus], dword [esi + pcidev.devfn], edi
add edi, 2
cmp al, MSICAP_CID
je .got_msi_cap
cmp al, MSIXCAP_CID
je .got_msix_cap
movzx edi, ah
test edi, edi
jnz .read_cap
jmp .end_cap_parse
.got_msi_cap:
DEBUGF DBG_INFO, "nvme%u: Found MSI capability\n", [esi + pcidev.num]
invoke PciRead32, dword [esi + pcidev.bus], dword [esi + pcidev.devfn], edi
and eax, not MSICAP_MSIE
invoke PciWrite32, dword [esi + pcidev.bus], dword [esi + pcidev.devfn], edi
jmp .end_cap_parse
.got_msix_cap:
DEBUGF DBG_INFO, "nvme%u: Found MSI-X capability\n", [esi + pcidev.num]
invoke PciRead32, dword [esi + pcidev.bus], dword [esi + pcidev.devfn], edi
and eax, not MSIXCAP_MXE
invoke PciWrite32, dword [esi + pcidev.bus], dword [esi + pcidev.devfn], edi
.end_cap_parse:
mov edi, dword [esi + pcidev.io_addr]
if 0
mov eax, dword [edi + NVME_MMIO.CAP]
DEBUGF DBG_INFO, "(NVMe) CAP (0-31): 0x%x\n", eax
mov eax, dword [edi + NVME_MMIO.CAP + 4]
DEBUGF DBG_INFO, "(NVMe) CAP (32-63): 0x%x\n", eax
mov eax, dword [edi + NVME_MMIO.CC]
DEBUGF DBG_INFO, "(NVMe) CC: 0x%x\n", eax
mov eax, dword [edi + NVME_MMIO.CSTS]
DEBUGF DBG_INFO, "(NVMe) CSTS: 0x%x\n", eax
end if
; check maximum queue entries supported
mov ax, word [edi + NVME_MMIO.CAP]
cmp ax, SQ_ENTRIES
jb .exit_fail
; For some reason, bit 7 (No I/O command set supported) is also set to 1 despite bit 0 (NVM command set)
; being set to 1.. so I am not sure if bit 7 should be checked at all.. investigate later.
mov eax, dword [edi + NVME_MMIO.CAP + 4]
test eax, CAP_CSS_NVM_CMDSET
jz .exit_fail
; Reset controller before we configure it
stdcall nvme_controller_reset, esi
if __DEBUG__
;stdcall nvme_wait, edi
end if
mov eax, dword [edi + NVME_MMIO.CAP + 4]
and eax, CAP_MPSMIN
shr eax, 16
cmp eax, NVM_MPS
ja .exit_fail
mov eax, dword [edi + NVME_MMIO.CAP + 4]
and eax, CAP_MPSMAX
shr eax, 20
cmp eax, NVM_MPS
jb .exit_fail
; Configure IOSQES, IOCQES, AMS, MPS, CSS
and dword [edi + NVME_MMIO.CC], not (CC_AMS or CC_MPS or CC_CSS or CC_IOSQES or CC_IOCQES)
mov eax, dword [edi + NVME_MMIO.CC]
; CSS = 0 (NVM Command Set)
; AMS = 0 (Round Robin)
; MPS = 0 (4KiB Pages)
; IOSQES = 6 (64B)
; IOCQES = 4 (16B)
or eax, (4 shl 20) or (6 shl 16)
mov dword [edi + NVME_MMIO.CC], eax
; Configure Admin Queue Attributes
mov eax, dword [edi + NVME_MMIO.AQA]
and eax, not (AQA_ASQS or AQA_ACQS)
or eax, NVM_ASQS or (NVM_ACQS shl 16)
mov dword [edi + NVME_MMIO.AQA], eax
; Allocate list of queues
invoke KernelAlloc, sizeof.NVM_QUEUE_ENTRY * (LAST_QUEUE_ID + 1)
test eax, eax
jz .exit_fail
mov dword [esi + pcidev.queue_entries], eax
mov edi, eax
stdcall memsetdz, eax, sizeof.NVM_QUEUE_ENTRY * (LAST_QUEUE_ID + 1) / 4
; Allocate submission/completion queue pointers
; TODO: Make these queues physically contiguous
xor ecx, ecx
@@:
push ecx
invoke CreateRingBuffer, 0x1000, PG_SW
pop ecx
test eax, eax
jz .exit_fail
mov dword [edi + ecx + NVM_QUEUE_ENTRY.sq_ptr], eax
push ecx
stdcall memsetdz, eax, sizeof.CQ_ENTRY * CQ_ENTRIES / 4
invoke CreateRingBuffer, 0x1000, PG_SW
pop ecx
test eax, eax
jz .exit_fail
mov dword [edi + ecx + NVM_QUEUE_ENTRY.cq_ptr], eax
push ecx
stdcall memsetdz, eax, sizeof.CQ_ENTRY * CQ_ENTRIES / 4
pop ecx
add ecx, sizeof.NVM_QUEUE_ENTRY
cmp ecx, (LAST_QUEUE_ID + 1) * sizeof.NVM_QUEUE_ENTRY
jne @b
; Configure Admin Submission/Completion Queue Base Address
mov esi, [pci]
mov esi, dword [esi + pcidev.io_addr]
mov eax, dword [edi + NVM_QUEUE_ENTRY.sq_ptr]
invoke GetPhysAddr
mov dword [esi + NVME_MMIO.ASQ], eax
mov dword [esi + NVME_MMIO.ASQ + 4], 0
mov eax, dword [edi + NVM_QUEUE_ENTRY.cq_ptr]
invoke GetPhysAddr
mov dword [esi + NVME_MMIO.ACQ], eax
mov dword [esi + NVME_MMIO.ACQ + 4], 0
; Attach interrupt handler
mov esi, [pci]
movzx eax, byte [esi + pcidev.iline]
;DEBUGF DBG_INFO, "nvme%u: Attaching interrupt handler to IRQ %u\n", [esi + pcidev.num], eax
invoke AttachIntHandler, eax, irq_handler, 0
test eax, eax
jz .exit_fail
;DEBUGF DBG_INFO, "nvme%u: Successfully attached interrupt handler\n", [esi + pcidev.num]
; Restart the controller
stdcall nvme_controller_start, esi
invoke KernelAlloc, 0x1000
test eax, eax
jz .exit_fail
mov edi, eax
invoke GetPhysAddr
; pci:dword, nsid:dword, dptr:dword, cns:byte
stdcall nvme_identify, [pci], 0, eax, CNS_IDCS
test eax, eax
jz .exit_fail
mov eax, dword [edi + IDENTC.nn]
mov dword [esi + pcidev.nn], eax
DEBUGF DBG_INFO, "nvme%u: Namespace Count: %u\n", [esi + pcidev.num], eax
lea ebx, byte [edi + IDENTC.sn]
lea eax, byte [esi + pcidev.serial]
stdcall memcpy, eax, ebx, 20
DEBUGF DBG_INFO, "nvme%u: Serial Number: %s\n", [esi + pcidev.num], eax
add ebx, 20
lea eax, byte [esi + pcidev.model]
stdcall memcpy, eax, ebx, 40
DEBUGF DBG_INFO, "nvme%u: Model: %s\n", [esi + pcidev.num], eax
mov edx, dword [esi + pcidev.version]
cmp edx, VS140
jb @f
; This is a reserved field in pre-1.4 controllers
mov al, byte [edi + IDENTC.cntrltype]
cmp al, CNTRLTYPE_IO_CONTROLLER
jne .exit_fail
;DEBUGF DBG_INFO, "nvme%u: I/O controller detected...\n", [esi + pcidev.num]
@@:
; TODO: check IDENTC.AVSCC
mov al, byte [edi + IDENTC.sqes]
and al, 11110000b
cmp al, 0x60 ; maximum submission queue size should at least be 64 bytes
jb .exit_fail
mov al, byte [edi + IDENTC.cqes]
and al, 11110000b
and al, 0x40 ; maximum completion queue entry size should at least be 16 bytes
jb .exit_fail
invoke KernelFree, edi
mov eax, 1 or (1 shl 16) ; CDW11 (set the number of queues we want)
LOCK_SPINLOCK
stdcall set_features, [pci], NULLPTR, FID_NUMBER_OF_QUEUES, eax
call nvme_poll
test eax, eax
jz .exit_fail
mov esi, [pci]
mov esi, dword [esi + pcidev.queue_entries]
mov esi, dword [esi + NVM_QUEUE_ENTRY.cq_ptr]
mov eax, dword [esi + sizeof.CQ_ENTRY + CQ_ENTRY.cdw0]
if __DEBUG__
;DEBUGF DBG_INFO, "nvme%u: Set Features CDW0: 0x%x\n", [esi + pcidev.num], eax
end if
test ax, ax ; Number of I/O Submission Queues allocated
jz .exit_fail
shl eax, 16
test ax, ax ; Number of I/O Completion Queues allocated
jnz .exit_fail
; Create I/O Queues
; (TODO: create N queue pairs for N CPU cores, see page 8 of NVMe 1.4 spec for an explaination
mov esi, [pci]
mov edi, esi
mov esi, dword [esi + pcidev.queue_entries]
lea esi, [esi + sizeof.NVM_QUEUE_ENTRY]
mov eax, dword [esi + NVM_QUEUE_ENTRY.cq_ptr]
invoke GetPhysAddr
stdcall create_io_completion_queue, [pci], eax, 1, IEN_ON
test eax, eax
jz .exit_fail
;DEBUGF DBG_INFO, "nvme%u: Successfully created I/O completion queue 1\n", [edi + pcidev.num]
mov eax, dword [esi + NVM_QUEUE_ENTRY.sq_ptr]
invoke GetPhysAddr
stdcall create_io_submission_queue, [pci], eax, 1, 1
jz .exit_fail
;DEBUGF DBG_INFO, "nvme%u: Successfully created I/O submission queue 1\n", [edi + pcidev.num]
stdcall determine_active_nsids, [pci]
test eax, eax
jz .exit_fail ; No active NSIDS
mov esi, [pci]
mov dword [esi + pcidev.nsid], eax
DEBUGF DBG_INFO, "nvme%u: Found active NSID: %u\n", [esi + pcidev.num], eax
invoke KernelAlloc, 0x1000
test eax, eax
jz .exit_fail
mov edi, eax
invoke GetPhysAddr
stdcall nvme_identify, [pci], [esi + pcidev.nsid], eax, CNS_IDNS
test eax, eax
jz .exit_fail
invoke KernelAlloc, sizeof.NSINFO
test eax, eax
jz .exit_fail
mov ebx, eax
mov dword [esi + pcidev.nsinfo], eax
mov al, byte [edi + IDENTN.nsfeat]
mov byte [ebx + NSINFO.features], al
;DEBUGF DBG_INFO, "nvme%un%u: Namespace Features: 0x%x\n", [esi + pcidev.num], [esi + pcidev.nsid], al
mov eax, dword [esi + pcidev.nsid]
mov dword [ebx + NSINFO.nsid], eax
mov dword [ebx + NSINFO.pci], esi
mov eax, dword [edi + IDENTN.nsze]
mov dword [ebx + NSINFO.size], eax
mov eax, dword [edi + IDENTN.nsze + 4]
mov dword [ebx + NSINFO.size + 4], eax
mov eax, dword [edi + IDENTN.ncap]
mov dword [ebx + NSINFO.capacity], eax
mov eax, dword [edi + IDENTN.ncap + 4]
mov dword [ebx + NSINFO.capacity + 4], eax
;DEBUGF DBG_INFO, "nvme%un%u: Namespace Size: %u + %u logical blocks\n", [esi + pcidev.num], [esi + pcidev.nsid], [edi + IDENTN.nsze], [edi + IDENTN.nsze + 4]
;DEBUGF DBG_INFO, "nvme%un%u: Namespace Capacity: %u + %u logical blocks\n", [esi + pcidev.num], [esi + pcidev.nsid], [edi + IDENTN.ncap], [edi + IDENTN.ncap + 4]
mov eax, dword [edi + IDENTN.lbaf0]
shr eax, 16 ; Get LBADS
; KolibriOS only supports a LBADS of 512, so if it's a higher value then we
; have to ignore this namespace
cmp al, SUPPORTED_LBADS
jne .exit_fail
mov byte [ebx + NSINFO.lbads], al
invoke KernelFree, edi
if 0
invoke KernelAlloc, 0x6000
test eax, eax
jz .exit_fail
mov edi, eax
invoke KernelAlloc, 0x8
test eax, eax
jz .exit_fail
mov edx, NVM_CMD_READ
mov dword [eax], 25
add edi, 0x5
LOCK_SPINLOCK
stdcall nvme_readwrite, [esi + pcidev.nsinfo], edi, 0x1000, 0, eax
call nvme_poll
test eax, eax
jz .exit_fail
DEBUGF DBG_INFO, "STRING: %s\n", edi
add edi, 0x2000
DEBUGF DBG_INFO, "STRING: %s\n", edi
end if
DEBUGF DBG_INFO, "nvme%u: Successfully initialized driver\n", [esi + pcidev.num]
xor eax, eax
inc eax
pop edi esi ebx
ret
.exit_fail:
if __DEBUG__
mov esi, [pci]
DEBUGF DBG_INFO, "nvme%u: failed to initialize controller\n", [esi + pcidev.num]
end if
xor eax, eax
pop edi esi ebx
ret
endp
proc get_new_cid stdcall, pci:dword, y:dword
push esi
mov esi, [pci]
mov esi, [esi + pcidev.queue_entries]
mov ecx, [y]
imul ecx, sizeof.NVM_QUEUE_ENTRY
movzx eax, word [esi + ecx + NVM_QUEUE_ENTRY.tail]
pop esi
ret
endp
proc nvme_controller_reset stdcall, pci:dword
push esi edi
mov esi, [pci]
DEBUGF DBG_INFO, "nvme%u: Resetting Controller...\n", [esi + pcidev.num]
mov edi, dword [esi + pcidev.io_addr]
and dword [edi + NVME_MMIO.CC], 0xfffffffe ; CC.EN = 0
; Wait for controller to be brought to idle state, CSTS.RDY should be cleared to 0 when this happens
.wait:
test dword [edi + NVME_MMIO.CSTS], CSTS_RDY
jnz .wait
DEBUGF DBG_INFO, "nvme%u: Successfully reset controller...\n", [esi + pcidev.num]
pop edi esi
ret
endp
proc nvme_controller_start stdcall, pci:dword
push esi edi
mov esi, [pci]
DEBUGF DBG_INFO, "nvme%u: Starting Controller...\n", [esi + pcidev.num]
mov edi, dword [esi + pcidev.io_addr]
or dword [edi + NVME_MMIO.CC], 1 ; CC.EN = 1
; Wait for controller to be brought into active state, CSTS.RDY should be set to 1 when this happens
.wait:
test dword [edi + NVME_MMIO.CSTS], CSTS_RDY
jz .wait
DEBUGF DBG_INFO, "nvme%u: Successfully started controller...\n", [esi + pcidev.num]
pop edi esi
ret
endp
; Should be called only after the value of CC.EN has changed
proc nvme_wait stdcall, mmio:dword
push esi
mov esi, [mmio]
mov esi, dword [esi + NVME_MMIO.CAP]
and esi, CAP_TO
shr esi, 24
imul esi, 150 ; TODO: bad time delay, set to appropriate value later
invoke Sleep
pop esi
ret
endp
proc nvme_poll
xor ecx, ecx
@@:
inc ecx
cmp ecx, 0xffffffff
je @f
xor eax, eax
inc eax
xchg eax, dword [spinlock]
test eax, eax
jnz @b
; lock was released, return 1
xor eax, eax
inc eax
ret
@@:
; timeout: lock wasn't released, return 0
xor eax, eax
ret
endp
; Writes to completion queue 'y' head doorbell
proc cqyhdbl_write stdcall, pci:dword, y:dword, cqh:dword
push esi edi
mov esi, [pci]
; 1000h + ((2y + 1) * (4 << CAP.DSTRD))
mov eax, [y]
shl al, 1
inc al
mov edx, 4
mov cl, byte [esi + pcidev.dstrd]
shl dx, cl
imul dx, ax
add dx, 0x1000
mov ecx, [y]
imul ecx, sizeof.NVM_QUEUE_ENTRY
mov edi, dword [esi + pcidev.queue_entries]
lea edi, dword [edi + ecx]
mov esi, dword [esi + pcidev.io_addr]
mov eax, [cqh]
;DEBUGF DBG_INFO, "Writing to completion queue doorbell register: %u\n", ax
mov word [esi + edx], ax ; Write to CQyHDBL
mov word [edi + NVM_QUEUE_ENTRY.head], ax
pop edi esi
ret
endp
; Writes to submission queue 'y' tail doorbell
proc sqytdbl_write stdcall, pci:dword, y:word, cmd:dword
push ebx esi edi
mov edi, [pci]
mov edi, dword [edi + pcidev.queue_entries]
movzx ecx, [y]
imul ecx, sizeof.NVM_QUEUE_ENTRY
mov edi, dword [edi + ecx + NVM_QUEUE_ENTRY.sq_ptr]
mov esi, [cmd]
mov ecx, dword [esi + SQ_ENTRY.cdw0]
shr ecx, 16 ; Get CID
imul ecx, sizeof.SQ_ENTRY
lea edi, [edi + ecx]
stdcall memcpy, edi, esi, sizeof.SQ_ENTRY
mov edi, [pci]
mov esi, dword [edi + pcidev.io_addr]
mov edi, dword [edi + pcidev.queue_entries]
movzx ecx, [y]
imul ecx, sizeof.NVM_QUEUE_ENTRY
movzx eax, word [edi + ecx + NVM_QUEUE_ENTRY.tail]
cmp ax, (NVM_ASQS - 1)
jb @f
xor ax, ax
@@:
mov esi, [pci]
inc ax
; 1000h + (2y * (4 << CAP.DSTRD))
movzx ebx, [y]
shl ebx, 1
mov edx, 4
mov cl, byte [esi + pcidev.dstrd]
shl edx, cl
imul edx, ebx
add edx, 0x1000
mov esi, dword [esi + pcidev.io_addr]
mov word [esi + edx], ax
movzx ecx, [y]
imul ecx, sizeof.NVM_QUEUE_ENTRY
mov word [edi + ecx + NVM_QUEUE_ENTRY.tail], ax
dec ax
movzx ecx, [y]
pop edi esi ebx
ret
endp
proc is_queue_full stdcall, tail:word, head:word
push bx
mov ax, [tail]
mov bx, [head]
cmp ax, bx
je .not_full
test bx, bx
jnz @f
cmp ax, NVM_ASQS
jne @f
pop bx
xor eax, eax
inc eax
ret
@@:
cmp ax, bx
jae .not_full
sub ax, bx
cmp ax, 1
jne .not_full
pop bx
xor eax, eax
inc eax
ret
.not_full:
pop bx
xor eax, eax
ret
endp
proc consume_cq_entries stdcall, pci:dword, queue:dword
push esi edi
mov esi, [pci]
mov ecx, [queue]
imul ecx, sizeof.NVM_QUEUE_ENTRY
mov esi, dword [esi + pcidev.queue_entries]
lea esi, [esi + ecx]
mov edi, dword [esi + NVM_QUEUE_ENTRY.cq_ptr]
movzx eax, word [esi + NVM_QUEUE_ENTRY.tail]
movzx ecx, word [esi + NVM_QUEUE_ENTRY.head]
stdcall is_queue_full, eax, ecx
test eax, eax
jnz .end
movzx ecx, word [esi + NVM_QUEUE_ENTRY.head]
cmp ecx, (NVM_ACQS - 1)
jb .loop
xor ecx, ecx
mov word [esi + NVM_QUEUE_ENTRY.head], cx
.loop:
cmp cx, word [esi + NVM_QUEUE_ENTRY.tail]
je .end
mov edx, ecx
imul edx, sizeof.CQ_ENTRY
mov ax, word [edi + edx + CQ_ENTRY.status]
;DEBUGF DBG_INFO, "Status: 0x%x\n", ax
inc cx
push ecx
stdcall cqyhdbl_write, [pci], [queue], ecx
pop ecx
jmp .loop
.end:
pop edi esi
xor eax, eax
ret
endp
proc irq_handler
push esi edi
mov esi, dword [p_nvme_devices]
; check if a NVMe device generated an interrupt
invoke PciRead16, dword [esi + pcidev.bus], dword [esi + pcidev.devfn], PCI_header00.status
test al, 1000b ; check interrupt status
jz .not_our_irq
mov edi, dword [esi + pcidev.io_addr]
mov dword [edi + NVME_MMIO.INTMS], 0x3
mov eax, dword [spinlock]
test eax, eax
jz @f ; not locked, so it must be an I/O command
stdcall consume_cq_entries, [p_nvme_devices], 0
@@:
stdcall consume_cq_entries, [p_nvme_devices], 1
; Interrupt handled by driver, return 1
mov dword [edi + NVME_MMIO.INTMC], 0x3
pop edi esi
xor eax, eax
xchg eax, dword [spinlock] ; unlock spinlock
mov eax, 1
ret
.not_our_irq:
; Interrupt not handled by driver, return 0
pop edi esi
xor eax, eax
ret
endp
proc nvme_cleanup
DEBUGF DBG_INFO, "(NVMe): Cleaning up...\n"
mov ecx, dword [pcidevs_len]
mov eax, dword [p_nvme_devices]
test eax, eax
jnz .loop
ret
.loop:
;invoke KernelFree, dword [p_nvme_devices + ecx * sizeof.pcidev + pcidev.ident_ptr]
dec ecx
test ecx, ecx
jnz .loop
invoke KernelFree, dword [p_nvme_devices]
@@:
ret
endp
;all initialized data place here
align 4
p_nvme_devices dd 0
pcidevs_len dd 0
spinlock dd 0
my_service db "NVMe",0 ;max 16 chars include zero
disk_functions:
dd disk_functions.end - disk_functions
dd 0 ; no close function
dd 0 ; no closemedia function
dd nvme_query_media
dd nvme_read
dd nvme_write
dd 0 ; no flush function
dd 0 ; use default cache size
.end:
if __DEBUG__
include_debug_strings
end if
align 4
data fixups
end data
Reference in New Issue View Git Blame Copy Permalink