Files
KOS_qrcodes/kernel/branches/net/boot/booteng.inc
T
hidnplayr e39d270463 A lot of bugfixes in ARP, IPv4, UDP and sockets code.
git-svn-id: svn://kolibrios.org@1206 a494cfbc-eb01-0410-851d-a64ba20cac60
2009-10-12 14:39:59 +00:00

111 lines
4.9 KiB
PHP
Raw Blame History

This file contains invisible Unicode characters
This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2004-2007. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;======================================================================
;
; BOOT DATA
;
;======================================================================
$Revision$
d80x25_bottom:
db 186,' KolibriOS is based on MenuetOS and comes with ABSOLUTELY '
db 'NO WARRANTY ',186
db 186,' See file COPYING for details '
db ' ',186
line_full_bottom
d80x25_bottom_num = 3
msg_apm db " APM x.x ", 0
vervesa db "Version of Vesa: Vesa x.x",13,10,0
novesa db "Display: EGA/CGA",13,10,0
s_vesa db "Version of VESA: "
.ver db "?.?",13,10,0
gr_mode db "Select a videomode: ",13,10,0
;s_bpp db 13,10,186," ƒ«ã¡¨­  梥â : "
; .bpp dw "??"
; db 13,10,0
vrrmprint db "Apply VRR? (picture frequency greater than 60Hz"
db " only for transfers:",13,10
db 186," 1024*768->800*600 and 800*600->640*480) [1-yes,2-no]:",0
ask_bd db "Add disks visible by BIOS emulated in V86-mode? [1-yes, 2-no]: ",0
bdev db "Load ramdisk from [1-floppy; 2-C:\kolibri.img (FAT32);"
db 13,10,186," "
db "3-use preloaded ram-image from kernel restart;"
db 13,10,186," "
db "4-create blank image]: ",0
probetext db 13,10,13,10,186," Use standart graphics mode? [1-yes, "
db "2-probe bios (Vesa 3.0)]: ",0
;memokz256 db 13,10,186," RAM 256 Mb",0
;memokz128 db 13,10,186," RAM 128 Mb",0
;memokz64 db 13,10,186," RAM 64 Mb",0
;memokz32 db 13,10,186," RAM 32 Mb",0
;memokz16 db 13,10,186," RAM 16 Mb",0
prnotfnd db "Fatal - Videomode not found.",0
;modena db "Fatal - VBE 0x112+ required.",0
not386 db "Fatal - CPU 386+ required.",0
btns db "Fatal - Can't determine color depth.",0
fatalsel db "Fatal - Graphics mode not supported by hardware.",0
pres_key db "Press any key to choose a new videomode.",0
badsect db 13,10,186," Fatal - Bad sector. Replace floppy.",0
memmovefailed db 13,10,186," Fatal - Int 0x15 move failed.",0
okt db " ... OK"
linef db 13,10,0
diskload db "Loading diskette: 00 %",8,8,8,8,0
pros db "00"
backspace2 db 8,8,0
boot_dev db 0 ; 0=floppy, 1=hd
start_msg db "Press [abcd] to change settings, press [Enter] to continue booting",13,10,0
time_msg db " or wait "
time_str db " 5 seconds"
db " before automatical continuation",13,10,0
current_cfg_msg db "Current settings:",13,10,0
curvideo_msg db " [a] Videomode: ",0
;modes_msg dw mode4,mode1,mode2,mode3
;modevesa20 db " with LFB",0
;modevesa12 db ", VESA 1.2 Bnk",0
mode0 db "320x200, EGA/CGA 256 colors",13,10,0
mode9 db "640x480, VGA 16 colors",13,10,0
;probeno_msg db " (standard mode)",0
;probeok_msg db " (check nonstandard modes)",0
;dma_msg db " [b] Use DMA for HDD access:",0
usebd_msg db " [b] Add disks visible by BIOS:",0
on_msg db " on",13,10,0
off_msg db " off",13,10,0
;readonly_msg db " only for reading",13,10,0
vrrm_msg db " [c] Use VRR:",0
preboot_device_msg db " [d] Floppy image: ",0
preboot_device_msgs dw 0,pdm1,pdm2,pdm3
pdm1 db "real floppy",13,10,0
pdm2 db "C:\kolibri.img (FAT32)",13,10,0
pdm3 db "use already loaded image",13,10,0
pdm4 db "create blank image",13,10,0
loading_msg db "Loading KolibriOS...",0
save_quest db "Remember current settings? [y/n]: ",0
loader_block_error db "Bootloader data invalid, I cannot continue. Stopped.",0
_st db 186,' ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄ¿',13,10,0
_r1 db 186,' ³ 320x200 EGA/CGA 256 colors ³ ³',13,10,0
_r2 db 186,' ³ 640x480 VGA 16 colors ³ ³',13,10,0
_rs db 186,' ³ ????x????@?? SVGA VESA ³ ³',13,10,0
_bt db 186,' ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÙ',13,10,0
remark1 db "Default values were selected to match most of configurations, but not all.",0
remark2 db "If you have CRT-monitor, enable VRR in the item [c].",0
remark3 db "If the system does not boot, try to disable the item [b].",0
remarks dw remark1, remark2, remark3
num_remarks = 3