kolibrios/kernel/branches/Kolibri-A/trunk/fs/ntfs.inc

1830 lines
50 KiB
PHP
Raw Permalink Normal View History

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2004-2008. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
$Revision$
ntfs_test_bootsec:
; in: ebx->buffer, edx=size of partition
; out: CF set <=> invalid
; 1. Name=='NTFS '
cmp dword [ebx+3], 'NTFS'
jnz .no
cmp dword [ebx+7], ' '
jnz .no
; 2. Number of bytes per sector is the same as for physical device
; (that is, 0x200 for hard disk)
cmp word [ebx+11], 0x200
jnz .no
; 3. Number of sectors per cluster must be power of 2
movzx eax, byte [ebx+13]
dec eax
js .no
test al, [ebx+13]
jnz .no
; 4. FAT parameters must be zero
cmp word [ebx+14], 0
jnz .no
cmp dword [ebx+16], 0
jnz .no
cmp byte [ebx+20], 0
jnz .no
cmp word [ebx+22], 0
jnz .no
cmp dword [ebx+32], 0
jnz .no
; 5. Number of sectors <= partition size
cmp dword [ebx+0x2C], 0
ja .no
cmp [ebx+0x28], edx
ja .no
; 6. $MFT and $MFTMirr clusters must be within partition
cmp dword [ebx+0x34], 0
ja .no
push edx
movzx eax, byte [ebx+13]
mul dword [ebx+0x30]
test edx, edx
pop edx
jnz .no
cmp eax, edx
ja .no
cmp dword [ebx+0x3C], 0
ja .no
push edx
movzx eax, byte [ebx+13]
mul dword [ebx+0x38]
test edx, edx
pop edx
jnz .no
cmp eax, edx
ja .no
; 7. Clusters per FRS must be either negative and in [-31,-9] or positive and power of 2
movsx eax, byte [ebx+0x40]
cmp al, -31
jl .no
cmp al, -9
jle @f
dec eax
js .no
test [ebx+0x40], al
jnz .no
@@:
; 8. Same for clusters per IndexAllocationBuffer
movsx eax, byte [ebx+0x44]
cmp al, -31
jl .no
cmp al, -9
jle @f
dec eax
js .no
test [ebx+0x44], al
jnz .no
@@:
; OK, this is correct NTFS bootsector
clc
ret
.no:
; No, this bootsector isn't NTFS
stc
ret
ntfs_setup: ; CODE XREF: part_set.inc
; By given bootsector, initialize some NTFS variables
; call ntfs_test_bootsec ; checking boot sector was already
; jc problem_fat_dec_count
movzx eax, byte [ebx+13]
mov [ntfs_data.sectors_per_cluster], eax
mov eax, [ebx+0x28]
add eax, [PARTITION_START]
dec eax
mov [PARTITION_END], eax
mov [fs_type], 1
mov eax, [ebx+0x30]
mov [ntfs_data.mft_cluster], eax
mov eax, [ebx+0x38]
mov [ntfs_data.mftmirr_cluster], eax
movsx eax, byte [ebx+0x40]
test eax, eax
js .1
mul [ntfs_data.sectors_per_cluster]
shl eax, 9
jmp .2
.1:
neg eax
mov ecx, eax
mov eax, 1
shl eax, cl
.2:
mov [ntfs_data.frs_size], eax
movsx eax, byte [ebx+0x44]
test eax, eax
js .3
mul [ntfs_data.sectors_per_cluster]
shl eax, 9
jmp .4
.3:
neg eax
mov ecx, eax
mov eax, 1
shl eax, cl
.4:
mov [ntfs_data.iab_size], eax
; allocate space for buffers
add eax, [ntfs_data.frs_size]
push eax
call kernel_alloc
test eax, eax
jz problem_fat_dec_count
mov [ntfs_data.frs_buffer], eax
add eax, [ntfs_data.frs_size]
mov [ntfs_data.iab_buffer], eax
; read $MFT disposition
mov eax, [ntfs_data.mft_cluster]
mul [ntfs_data.sectors_per_cluster]
call ntfs_read_frs_sector
cmp [hd_error], 0
jnz .usemirr
cmp dword [ebx], 'FILE'
jnz .usemirr
call ntfs_restore_usa_frs
jnc .mftok
.usemirr:
and [hd_error], 0
mov eax, [ntfs_data.mftmirr_cluster]
mul [ntfs_data.sectors_per_cluster]
call ntfs_read_frs_sector
cmp [hd_error], 0
jnz @f
cmp dword [ebx], 'FILE'
jnz @f
call ntfs_restore_usa_frs
jnc .mftok
@@:
; $MFT and $MFTMirr invalid!
.fail_free_frs:
push [ntfs_data.frs_buffer]
call kernel_free
jmp problem_fat_dec_count
.fail_free_mft:
push [ntfs_data.mft_retrieval]
call kernel_free
jmp .fail_free_frs
.mftok:
; read $MFT table retrieval information
; start with one page, increase if not enough (when MFT too fragmented)
push ebx
push 0x1000
call kernel_alloc
pop ebx
test eax, eax
jz .fail_free_frs
mov [ntfs_data.mft_retrieval], eax
and [ntfs_data.mft_retrieval_size], 0
mov [ntfs_data.mft_retrieval_alloc], 0x1000/8
; $MFT base record must contain unnamed non-resident $DATA attribute
movzx eax, word [ebx+14h]
add eax, ebx
.scandata:
cmp dword [eax], -1
jz .fail_free_mft
cmp dword [eax], 0x80
jnz @f
cmp byte [eax+9], 0
jz .founddata
@@:
add eax, [eax+4]
jmp .scandata
.founddata:
cmp byte [eax+8], 0
jz .fail_free_mft
; load first portion of $DATA attribute retrieval information
mov edx, [eax+0x18]
mov [ntfs_data.mft_retrieval_end], edx
mov esi, eax
movzx eax, word [eax+0x20]
add esi, eax
sub esp, 10h
.scanmcb:
call ntfs_decode_mcb_entry
jnc .scanmcbend
call .get_mft_retrieval_ptr
mov edx, [esp] ; block length
mov [eax], edx
mov edx, [esp+8] ; block addr (relative)
mov [eax+4], edx
inc [ntfs_data.mft_retrieval_size]
jmp .scanmcb
.scanmcbend:
add esp, 10h
; there may be other portions of $DATA attribute in auxiliary records;
; if they will be needed, they will be loaded later
mov [ntfs_data.cur_index_size], 0x1000/0x200
push 0x1000
call kernel_alloc
test eax, eax
jz .fail_free_mft
mov [ntfs_data.cur_index_buf], eax
popad
call free_hd_channel
and [hd1_status], 0
ret
.get_mft_retrieval_ptr:
pushad
mov eax, [ntfs_data.mft_retrieval_size]
cmp eax, [ntfs_data.mft_retrieval_alloc]
jnz .ok
add eax, 0x1000/8
mov [ntfs_data.mft_retrieval_alloc], eax
shl eax, 3
push eax
call kernel_alloc
test eax, eax
jnz @f
popad
add esp, 14h
jmp .fail_free_mft
@@:
mov esi, [ntfs_data.mft_retrieval]
mov edi, eax
mov ecx, [ntfs_data.mft_retrieval_size]
add ecx, ecx
rep movsd
push [ntfs_data.mft_retrieval]
mov [ntfs_data.mft_retrieval], eax
call kernel_free
mov eax, [ntfs_data.mft_retrieval_size]
.ok:
shl eax, 3
add eax, [ntfs_data.mft_retrieval]
mov [esp+28], eax
popad
ret
ntfs_read_frs_sector:
push eax ecx
add eax, [PARTITION_START]
mov ecx, [ntfs_data.frs_size]
shr ecx, 9
mov ebx, [ntfs_data.frs_buffer]
push ebx
@@:
call hd_read
cmp [hd_error], 0
jnz .fail
add ebx, 0x200
inc eax
loop @b
.fail:
pop ebx
pop ecx eax
ret
uglobal
align 4
ntfs_cur_attr dd ?
ntfs_cur_iRecord dd ?
ntfs_cur_offs dd ? ; in sectors
ntfs_cur_size dd ? ; in sectors
ntfs_cur_buf dd ?
ntfs_cur_read dd ? ; [output]
ntfs_bCanContinue db ?
rb 3
ntfs_attrlist_buf rb 0x400
ntfs_attrlist_mft_buf rb 0x400
ntfs_bitmap_buf rb 0x400
ntfs_attr_iRecord dd ?
ntfs_attr_iBaseRecord dd ?
ntfs_attr_offs dd ?
ntfs_attr_list dd ?
ntfs_attr_size dq ?
ntfs_cur_tail dd ?
endg
ntfs_read_attr:
; in: global variables
; out: [ntfs_cur_read]
pushad
and [ntfs_cur_read], 0
cmp [ntfs_cur_iRecord], 0
jnz .nomft
cmp [ntfs_cur_attr], 0x80
jnz .nomft
mov eax, [ntfs_data.mft_retrieval_end]
inc eax
mul [ntfs_data.sectors_per_cluster]
cmp eax, [ntfs_cur_offs]
jbe .nomft
; precalculated part of $Mft $DATA
mov esi, [ntfs_data.mft_retrieval]
mov eax, [ntfs_cur_offs]
xor edx, edx
div [ntfs_data.sectors_per_cluster]
; eax = VCN, edx = offset in sectors from beginning of cluster
xor ecx, ecx ; ecx will contain LCN
.mftscan:
add ecx, [esi+4]
sub eax, [esi]
jb @f
add esi, 8
push eax
mov eax, [ntfs_data.mft_retrieval_end]
shl eax, 3
add eax, [ntfs_data.mft_retrieval]
cmp eax, esi
pop eax
jnz .mftscan
jmp .nomft
@@:
push ecx
add ecx, eax
add ecx, [esi]
push eax
push edx
mov eax, [ntfs_data.sectors_per_cluster]
mul ecx
; eax = sector on partition
add eax, [PARTITION_START]
pop edx
add eax, edx
mov ebx, [ntfs_cur_buf]
pop ecx
neg ecx
imul ecx, [ntfs_data.sectors_per_cluster]
sub ecx, edx
cmp ecx, [ntfs_cur_size]
jb @f
mov ecx, [ntfs_cur_size]
@@:
; ecx = number of sequential sectors to read
call hd_read
cmp [hd_error], 0
jnz .errread
add [ntfs_cur_read], 0x200
dec [ntfs_cur_size]
inc [ntfs_cur_offs]
add ebx, 0x200
mov [ntfs_cur_buf], ebx
inc eax
loop @b
pop ecx
xor eax, eax
xor edx, edx
cmp [ntfs_cur_size], eax
jz @f
add esi, 8
push eax
mov eax, [ntfs_data.mft_retrieval_end]
shl eax, 3
add eax, [ntfs_data.mft_retrieval]
cmp eax, esi
pop eax
jz .nomft
jmp .mftscan
@@:
popad
ret
.errread:
pop ecx
.errret:
stc
popad
ret
.nomft:
; 1. Read file record.
; N.B. This will do recursive call of read_attr for $MFT::$Data.
mov eax, [ntfs_cur_iRecord]
mov [ntfs_attr_iRecord], eax
and [ntfs_attr_list], 0
or dword [ntfs_attr_size], -1
or dword [ntfs_attr_size+4], -1
or [ntfs_attr_iBaseRecord], -1
call ntfs_read_file_record
test eax, eax
jz .errret
; 2. Find required attribute.
mov eax, [ntfs_data.frs_buffer]
; a) For auxiliary records, read base record
; N.B. If base record is present,
; base iRecord may be 0 (for $Mft), but SequenceNumber is nonzero
cmp dword [eax+24h], 0
jz @f
mov eax, [eax+20h]
; test eax, eax
; jz @f
.beginfindattr:
mov [ntfs_attr_iRecord], eax
call ntfs_read_file_record
test eax, eax
jz .errret
@@:
; b) Scan for required attribute and for $ATTR_LIST
mov eax, [ntfs_data.frs_buffer]
movzx ecx, word [eax+14h]
add eax, ecx
mov ecx, [ntfs_cur_attr]
and [ntfs_attr_offs], 0
.scanattr:
cmp dword [eax], -1
jz .scandone
cmp dword [eax], ecx
jz .okattr
cmp [ntfs_attr_iBaseRecord], -1
jnz .scancont
cmp dword [eax], 0x20 ; $ATTR_LIST
jnz .scancont
mov [ntfs_attr_list], eax
jmp .scancont
.okattr:
; ignore named $DATA attributes (aka NTFS streams)
cmp ecx, 0x80
jnz @f
cmp byte [eax+9], 0
jnz .scancont
@@:
mov [ntfs_attr_offs], eax
.scancont:
add eax, [eax+4]
jmp .scanattr
.continue:
pushad
and [ntfs_cur_read], 0
.scandone:
; c) Check for required offset and length
mov ecx, [ntfs_attr_offs]
jecxz .noattr
push [ntfs_cur_size]
push [ntfs_cur_read]
call .doreadattr
pop edx
pop eax
jc @f
cmp [ntfs_bCanContinue], 0
jz @f
sub edx, [ntfs_cur_read]
neg edx
shr edx, 9
sub eax, edx
mov [ntfs_cur_size], eax
jnz .not_in_cur
@@:
popad
ret
.noattr:
.not_in_cur:
cmp [ntfs_cur_attr], 0x20
jz @f
mov ecx, [ntfs_attr_list]
test ecx, ecx
jnz .lookattr
.ret_is_attr:
cmp [ntfs_attr_offs], 1 ; CF set <=> ntfs_attr_offs == 0
popad
ret
.lookattr:
; required attribute or required offset was not found in base record;
; it may be present in auxiliary records;
; scan $ATTR_LIST
mov eax, [ntfs_attr_iBaseRecord]
cmp eax, -1
jz @f
call ntfs_read_file_record
test eax, eax
jz .errret
or [ntfs_attr_iBaseRecord], -1
@@:
push [ntfs_cur_offs]
push [ntfs_cur_size]
push [ntfs_cur_read]
push [ntfs_cur_buf]
push dword [ntfs_attr_size]
push dword [ntfs_attr_size+4]
or dword [ntfs_attr_size], -1
or dword [ntfs_attr_size+4], -1
and [ntfs_cur_offs], 0
mov [ntfs_cur_size], 2
and [ntfs_cur_read], 0
mov eax, ntfs_attrlist_buf
cmp [ntfs_cur_iRecord], 0
jnz @f
mov eax, ntfs_attrlist_mft_buf
@@:
mov [ntfs_cur_buf], eax
push eax
call .doreadattr
pop esi
mov edx, 1
pop dword [ntfs_attr_size+4]
pop dword [ntfs_attr_size]
mov ebp, [ntfs_cur_read]
pop [ntfs_cur_buf]
pop [ntfs_cur_read]
pop [ntfs_cur_size]
pop [ntfs_cur_offs]
jc .errret
or edi, -1
lea ebp, [ebp+esi-1Ah]
.scanliststart:
mov eax, [ntfs_cur_attr]
.scanlist:
cmp esi, ebp
jae .scanlistdone
cmp eax, [esi]
jz @f
.scanlistcont:
movzx ecx, word [esi+4]
add esi, ecx
jmp .scanlist
@@:
; ignore named $DATA attributes (aka NTFS streams)
cmp eax, 0x80
jnz @f
cmp byte [esi+6], 0
jnz .scanlistcont
@@:
push eax
mov eax, [esi+8]
test eax, eax
jnz .testf
mov eax, dword [ntfs_attr_size]
and eax, dword [ntfs_attr_size+4]
cmp eax, -1
jnz .testfz
; if attribute is in auxiliary records, its size is defined only in first
mov eax, [esi+10h]
call ntfs_read_file_record
test eax, eax
jnz @f
.errret_pop:
pop eax
jmp .errret
@@:
mov eax, [ntfs_data.frs_buffer]
movzx ecx, word [eax+14h]
add eax, ecx
mov ecx, [ntfs_cur_attr]
@@:
cmp dword [eax], -1
jz .errret_pop
cmp dword [eax], ecx
jz @f
.l1:
add eax, [eax+4]
jmp @b
@@:
cmp eax, 0x80
jnz @f
cmp byte [eax+9], 0
jnz .l1
@@:
cmp byte [eax+8], 0
jnz .sdnores
mov eax, [eax+10h]
mov dword [ntfs_attr_size], eax
and dword [ntfs_attr_size+4], 0
jmp .testfz
.sdnores:
mov ecx, [eax+30h]
mov dword [ntfs_attr_size], ecx
mov ecx, [eax+34h]
mov dword [ntfs_attr_size+4], ecx
.testfz:
xor eax, eax
.testf:
imul eax, [ntfs_data.sectors_per_cluster]
cmp eax, [ntfs_cur_offs]
pop eax
ja @f
mov edi, [esi+10h] ; keep previous iRecord
jmp .scanlistcont
@@:
.scanlistfound:
cmp edi, -1
jnz @f
popad
ret
@@:
mov eax, [ntfs_cur_iRecord]
mov [ntfs_attr_iBaseRecord], eax
mov eax, edi
jmp .beginfindattr
.sde:
popad
stc
ret
.scanlistdone:
sub ebp, ntfs_attrlist_buf-1Ah
cmp [ntfs_cur_iRecord], 0
jnz @f
sub ebp, ntfs_attrlist_mft_buf-ntfs_attrlist_buf
@@:
cmp ebp, 0x400
jnz .scanlistfound
inc edx
push esi edi
mov esi, ntfs_attrlist_buf+0x200
mov edi, ntfs_attrlist_buf
cmp [ntfs_cur_iRecord], 0
jnz @f
mov esi, ntfs_attrlist_mft_buf+0x200
mov edi, ntfs_attrlist_mft_buf
@@:
mov ecx, 0x200/4
rep movsd
mov eax, edi
pop edi esi
sub esi, 0x200
push [ntfs_cur_offs]
push [ntfs_cur_size]
push [ntfs_cur_read]
push [ntfs_cur_buf]
push dword [ntfs_attr_size]
push dword [ntfs_attr_size+4]
or dword [ntfs_attr_size], -1
or dword [ntfs_attr_size+4], -1
mov [ntfs_cur_offs], edx
mov [ntfs_cur_size], 1
and [ntfs_cur_read], 0
mov [ntfs_cur_buf], eax
mov ecx, [ntfs_attr_list]
push esi edx
call .doreadattr
pop edx esi
mov ebp, [ntfs_cur_read]
pop dword [ntfs_attr_size+4]
pop dword [ntfs_attr_size]
pop [ntfs_cur_buf]
pop [ntfs_cur_read]
pop [ntfs_cur_size]
pop [ntfs_cur_offs]
jc .errret
add ebp, ntfs_attrlist_buf+0x200-0x1A
cmp [ntfs_cur_iRecord], 0
jnz .scanliststart
add ebp, ntfs_attrlist_mft_buf-ntfs_attrlist_buf
jmp .scanliststart
.doreadattr:
mov [ntfs_bCanContinue], 0
cmp byte [ecx+8], 0
jnz .nonresident
mov eax, [ecx+10h] ; length
mov esi, eax
mov edx, [ntfs_cur_offs]
shr eax, 9
cmp eax, edx
jb .okret
shl edx, 9
sub esi, edx
movzx eax, word [ecx+14h]
add edx, eax
add edx, ecx ; edx -> data
mov eax, [ntfs_cur_size]
cmp eax, (0xFFFFFFFF shr 9)+1
jbe @f
mov eax, (0xFFFFFFFF shr 9)+1
@@:
shl eax, 9
cmp eax, esi
jbe @f
mov eax, esi
@@:
; eax = length, edx -> data
mov [ntfs_cur_read], eax
mov ecx, eax
mov eax, edx
mov ebx, [ntfs_cur_buf]
call memmove
and [ntfs_cur_size], 0 ; CF=0
ret
.nonresident:
; Not all auxiliary records contain correct FileSize info
mov eax, dword [ntfs_attr_size]
mov edx, dword [ntfs_attr_size+4]
push eax
and eax, edx
cmp eax, -1
pop eax
jnz @f
mov eax, [ecx+30h] ; FileSize
mov edx, [ecx+34h]
mov dword [ntfs_attr_size], eax
mov dword [ntfs_attr_size+4], edx
@@:
add eax, 0x1FF
adc edx, 0
shrd eax, edx, 9
sub eax, [ntfs_cur_offs]
ja @f
; return with nothing read
and [ntfs_cur_size], 0
.okret:
clc
ret
@@:
; reduce read length
and [ntfs_cur_tail], 0
cmp [ntfs_cur_size], eax
jb @f
mov [ntfs_cur_size], eax
mov eax, dword [ntfs_attr_size]
and eax, 0x1FF
mov [ntfs_cur_tail], eax
@@:
cmp [ntfs_cur_size], 0
jz .okret
mov eax, [ntfs_cur_offs]
xor edx, edx
div [ntfs_data.sectors_per_cluster]
sub eax, [ecx+10h] ; first_vbo
jb .okret
; eax = cluster, edx = starting sector
sub esp, 10h
movzx esi, word [ecx+20h] ; mcb_info_ofs
add esi, ecx
xor ebp, ebp
.readloop:
call ntfs_decode_mcb_entry
jnc .break
add ebp, [esp+8]
sub eax, [esp]
jae .readloop
push ecx
push eax
add eax, [esp+8]
add eax, ebp
imul eax, [ntfs_data.sectors_per_cluster]
add eax, edx
add eax, [PARTITION_START]
pop ecx
neg ecx
imul ecx, [ntfs_data.sectors_per_cluster]
sub ecx, edx
cmp ecx, [ntfs_cur_size]
jb @f
mov ecx, [ntfs_cur_size]
@@:
mov ebx, [ntfs_cur_buf]
@@:
call hd_read
cmp [hd_error], 0
jnz .errread2
add ebx, 0x200
mov [ntfs_cur_buf], ebx
inc eax
add [ntfs_cur_read], 0x200
dec [ntfs_cur_size]
inc [ntfs_cur_offs]
loop @b
pop ecx
xor eax, eax
xor edx, edx
cmp [ntfs_cur_size], 0
jnz .readloop
add esp, 10h
mov eax, [ntfs_cur_tail]
test eax, eax
jz @f
sub eax, 0x200
add [ntfs_cur_read], eax
@@:
clc
ret
.errread2:
pop ecx
add esp, 10h
stc
ret
.break:
add esp, 10h ; CF=0
mov [ntfs_bCanContinue], 1
ret
ntfs_read_file_record:
; in: eax=iRecord
; out: [ntfs_data.frs_buffer] contains information
; eax=0 - failed, eax=1 - success
; Read attr $DATA of $Mft, starting from eax*[ntfs_data.frs_size]
push ecx edx
mov ecx, [ntfs_data.frs_size]
mul ecx
shrd eax, edx, 9
shr edx, 9
jnz .err
push [ntfs_attr_iRecord]
push [ntfs_attr_iBaseRecord]
push [ntfs_attr_offs]
push [ntfs_attr_list]
push dword [ntfs_attr_size+4]
push dword [ntfs_attr_size]
push [ntfs_cur_iRecord]
push [ntfs_cur_attr]
push [ntfs_cur_offs]
push [ntfs_cur_size]
push [ntfs_cur_buf]
push [ntfs_cur_read]
mov [ntfs_cur_attr], 0x80 ; $DATA
and [ntfs_cur_iRecord], 0 ; $Mft
mov [ntfs_cur_offs], eax
shr ecx, 9
mov [ntfs_cur_size], ecx
mov eax, [ntfs_data.frs_buffer]
mov [ntfs_cur_buf], eax
call ntfs_read_attr
mov eax, [ntfs_cur_read]
pop [ntfs_cur_read]
pop [ntfs_cur_buf]
pop [ntfs_cur_size]
pop [ntfs_cur_offs]
pop [ntfs_cur_attr]
pop [ntfs_cur_iRecord]
pop dword [ntfs_attr_size]
pop dword [ntfs_attr_size+4]
pop [ntfs_attr_list]
pop [ntfs_attr_offs]
pop [ntfs_attr_iBaseRecord]
pop [ntfs_attr_iRecord]
pop edx ecx
jc .errret
cmp eax, [ntfs_data.frs_size]
jnz .errret
mov eax, [ntfs_data.frs_buffer]
cmp dword [eax], 'FILE'
jnz .errret
push ebx
mov ebx, eax
call ntfs_restore_usa_frs
pop ebx
setnc al
movzx eax, al
.ret:
ret
.err:
pop edx ecx
.errret:
xor eax, eax
ret
ntfs_restore_usa_frs:
mov eax, [ntfs_data.frs_size]
ntfs_restore_usa:
pushad
shr eax, 9
mov ecx, eax
inc eax
cmp [ebx+6], ax
jnz .err
movzx eax, word [ebx+4]
lea esi, [eax+ebx]
lodsw
mov edx, eax
lea edi, [ebx+0x1FE]
@@:
cmp [edi], dx
jnz .err
lodsw
stosw
add edi, 0x1FE
loop @b
popad
clc
ret
.err:
popad
stc
ret
ntfs_decode_mcb_entry:
push eax ecx edi
lea edi, [esp+16]
xor eax, eax
lodsb
test al, al
jz .end
mov ecx, eax
and ecx, 0xF
cmp ecx, 8
ja .end
push ecx
rep movsb
pop ecx
sub ecx, 8
neg ecx
cmp byte [esi-1], 80h
jae .end
push eax
xor eax, eax
rep stosb
pop ecx
shr ecx, 4
cmp ecx, 8
ja .end
push ecx
rep movsb
pop ecx
sub ecx, 8
neg ecx
cmp byte [esi-1], 80h
cmc
sbb eax, eax
rep stosb
stc
.end:
pop edi ecx eax
ret
unichar_toupper:
push eax
call uni2ansi_char
cmp al, '_'
jz .unk
add esp, 4
call char_toupper
jmp ansi2uni_char
.unk:
pop eax
ret
ntfs_find_lfn:
; in: esi+ebp -> name
; out: CF=1 - file not found
; else CF=0, [ntfs_cur_iRecord] valid, eax->record in parent directory
mov [ntfs_cur_iRecord], 5 ; start parse from root cluster
.doit2:
mov [ntfs_cur_attr], 0x90 ; $INDEX_ROOT
and [ntfs_cur_offs], 0
mov eax, [ntfs_data.cur_index_size]
mov [ntfs_cur_size], eax
mov eax, [ntfs_data.cur_index_buf]
mov [ntfs_cur_buf], eax
call ntfs_read_attr
jnc @f
.ret:
ret
@@:
cmp [ntfs_cur_read], 0x20
jc .ret
pushad
mov esi, [ntfs_data.cur_index_buf]
mov eax, [esi+14h]
add eax, 10h
cmp [ntfs_cur_read], eax
jae .readok1
add eax, 1FFh
shr eax, 9
cmp eax, [ntfs_data.cur_index_size]
ja @f
.stc_ret:
popad
stc
ret
@@:
; reallocate
push eax
push [ntfs_data.cur_index_buf]
call kernel_free
pop eax
mov [ntfs_data.cur_index_size], eax
push eax
call kernel_alloc
test eax, eax
jnz @f
and [ntfs_data.cur_index_size], 0
and [ntfs_data.cur_index_buf], 0
jmp .stc_ret
@@:
mov [ntfs_data.cur_index_buf], eax
popad
jmp .doit2
.readok1:
mov ebp, [esi+8] ; subnode_size
shr ebp, 9
cmp ebp, [ntfs_data.cur_index_size]
jbe .ok2
push esi ebp
push ebp
call kernel_alloc
pop ebp esi
test eax, eax
jz .stc_ret
mov edi, eax
mov ecx, [ntfs_data.cur_index_size]
shl ecx, 9-2
rep movsd
mov esi, eax
mov [ntfs_data.cur_index_size], ebp
push esi ebp
push [ntfs_data.cur_index_buf]
call kernel_free
pop ebp esi
mov [ntfs_data.cur_index_buf], esi
.ok2:
add esi, 10h
mov edi, [esp+4]
; edi -> name, esi -> current index data, ebp = subnode size
.scanloop:
add esi, [esi]
.scanloopint:
test byte [esi+0Ch], 2
jnz .subnode
push esi
add esi, 0x52
movzx ecx, byte [esi-2]
push edi
@@:
lodsw
call unichar_toupper
push eax
mov al, [edi]
inc edi
cmp al, '/'
jz .slash
call char_toupper
call ansi2uni_char
cmp ax, [esp]
pop eax
loopz @b
jz .found
pop edi
pop esi
jb .subnode
.scanloopcont:
movzx eax, word [esi+8]
add esi, eax
jmp .scanloopint
.slash:
pop eax
pop edi
pop esi
.subnode:
test byte [esi+0Ch], 1
jz .notfound
movzx eax, word [esi+8]
mov eax, [esi+eax-8]
mul [ntfs_data.sectors_per_cluster]
mov [ntfs_cur_offs], eax
mov [ntfs_cur_attr], 0xA0 ; $INDEX_ALLOCATION
mov [ntfs_cur_size], ebp
mov eax, [ntfs_data.cur_index_buf]
mov esi, eax
mov [ntfs_cur_buf], eax
call ntfs_read_attr
mov eax, ebp
shl eax, 9
cmp [ntfs_cur_read], eax
jnz .notfound
cmp dword [esi], 'INDX'
jnz .notfound
mov ebx, esi
call ntfs_restore_usa
jc .notfound
add esi, 0x18
jmp .scanloop
.notfound:
popad
stc
ret
.found:
cmp byte [edi], 0
jz .done
cmp byte [edi], '/'
jz .next
pop edi
pop esi
jmp .scanloopcont
.done:
.next:
pop esi
pop esi
mov eax, [esi]
mov [ntfs_cur_iRecord], eax
mov [esp+1Ch], esi
mov [esp+4], edi
popad
inc esi
cmp byte [esi-1], 0
jnz .doit2
test ebp, ebp
jz @f
mov esi, ebp
xor ebp, ebp
jmp .doit2
@@:
ret
;----------------------------------------------------------------
;
; ntfs_HdRead - read NTFS hard disk
;
; esi points to filename
; ebx pointer to 64-bit number = first wanted byte, 0+
; may be ebx=0 - start from first byte
; ecx number of bytes to read, 0+
; edx mem location to return data
;
; ret ebx = bytes read or 0xffffffff file not found
; eax = 0 ok read or other = errormsg
;
;--------------------------------------------------------------
ntfs_HdRead:
cmp byte [esi], 0
jnz @f
or ebx, -1
push ERROR_ACCESS_DENIED
pop eax
ret
@@:
call ntfs_find_lfn
jnc .found
or ebx, -1
push ERROR_FILE_NOT_FOUND
pop eax
ret
.found:
mov [ntfs_cur_attr], 0x80 ; $DATA
and [ntfs_cur_offs], 0
and [ntfs_cur_size], 0
call ntfs_read_attr
jnc @f
or ebx, -1
push ERROR_ACCESS_DENIED
pop eax
ret
@@:
pushad
and dword [esp+10h], 0
xor eax, eax
test ebx, ebx
jz .zero1
cmp dword [ebx+4], 0x200
jb @f
.eof0:
popad
xor ebx, ebx
.eof:
push ERROR_END_OF_FILE
pop eax
ret
@@:
mov eax, [ebx]
test eax, 0x1FF
jz .alignedstart
push edx
mov edx, [ebx+4]
shrd eax, edx, 9
pop edx
mov [ntfs_cur_offs], eax
mov [ntfs_cur_size], 1
mov [ntfs_cur_buf], ntfs_bitmap_buf
call ntfs_read_attr.continue
mov eax, [ebx]
and eax, 0x1FF
lea esi, [ntfs_bitmap_buf+eax]
sub eax, [ntfs_cur_read]
jae .eof0
neg eax
push ecx
cmp ecx, eax
jb @f
mov ecx, eax
@@:
mov [esp+10h+4], ecx
mov edi, edx
rep movsb
mov edx, edi
pop ecx
sub ecx, [esp+10h]
jnz @f
.retok:
popad
xor eax, eax
ret
@@:
cmp [ntfs_cur_read], 0x200
jz .alignedstart
.eof_ebx:
popad
jmp .eof
.alignedstart:
mov eax, [ebx]
push edx
mov edx, [ebx+4]
add eax, 511
adc edx, 0
shrd eax, edx, 9
pop edx
.zero1:
mov [ntfs_cur_offs], eax
mov [ntfs_cur_buf], edx
mov eax, ecx
shr eax, 9
mov [ntfs_cur_size], eax
add eax, [ntfs_cur_offs]
push eax
call ntfs_read_attr.continue
pop [ntfs_cur_offs]
mov eax, [ntfs_cur_read]
add [esp+10h], eax
mov eax, ecx
and eax, not 0x1FF
cmp [ntfs_cur_read], eax
jnz .eof_ebx
and ecx, 0x1FF
jz .retok
add edx, [ntfs_cur_read]
mov [ntfs_cur_size], 1
mov [ntfs_cur_buf], ntfs_bitmap_buf
call ntfs_read_attr.continue
cmp [ntfs_cur_read], ecx
jb @f
mov [ntfs_cur_read], ecx
@@:
xchg ecx, [ntfs_cur_read]
push ecx
mov edi, edx
mov esi, ntfs_bitmap_buf
add [esp+10h+4], ecx
rep movsb
pop ecx
xor eax, eax
cmp ecx, [ntfs_cur_read]
jz @f
mov al, ERROR_END_OF_FILE
@@:
mov [esp+1Ch], eax
popad
ret
;----------------------------------------------------------------
;
; ntfs_HdReadFolder - read NTFS hard disk folder
;
; esi points to filename
; ebx pointer to structure 32-bit number = first wanted block, 0+
; & flags (bitfields)
; flags: bit 0: 0=ANSI names, 1=UNICODE names
; ecx number of blocks to read, 0+
; edx mem location to return data
;
; ret ebx = blocks read or 0xffffffff folder not found
; eax = 0 ok read or other = errormsg
;
;--------------------------------------------------------------
ntfs_HdReadFolder:
mov eax, 5 ; root cluster
cmp byte [esi], 0
jz .doit
call ntfs_find_lfn
jnc .doit2
.notfound:
or ebx, -1
push ERROR_FILE_NOT_FOUND
.pop_ret:
pop eax
ret
.doit:
mov [ntfs_cur_iRecord], eax
.doit2:
mov [ntfs_cur_attr], 0x10 ; $STANDARD_INFORMATION
and [ntfs_cur_offs], 0
mov [ntfs_cur_size], 1
mov [ntfs_cur_buf], ntfs_bitmap_buf
call ntfs_read_attr
jc .notfound
mov [ntfs_cur_attr], 0x90 ; $INDEX_ROOT
and [ntfs_cur_offs], 0
mov eax, [ntfs_data.cur_index_size]
mov [ntfs_cur_size], eax
mov eax, [ntfs_data.cur_index_buf]
mov [ntfs_cur_buf], eax
call ntfs_read_attr
jnc .ok
cmp [hd_error], 0
jz .notfound
or ebx, -1
push 11
jmp .pop_ret
.ok:
cmp [ntfs_cur_read], 0x20
jae @f
or ebx, -1
.fserr:
push ERROR_FAT_TABLE
jmp .pop_ret
@@:
pushad
mov esi, [ntfs_data.cur_index_buf]
mov eax, [esi+14h]
add eax, 10h
cmp [ntfs_cur_read], eax
jae .readok1
add eax, 1FFh
shr eax, 9
cmp eax, [ntfs_data.cur_index_size]
ja @f
popad
jmp .fserr
@@:
; reallocate
push eax
push [ntfs_data.cur_index_buf]
call kernel_free
pop eax
mov [ntfs_data.cur_index_size], eax
push eax
call kernel_alloc
test eax, eax
jnz @f
and [ntfs_data.cur_index_size], 0
and [ntfs_data.cur_index_buf], 0
.nomem:
popad
or ebx, -1
push 12
pop eax
ret
@@:
mov [ntfs_data.cur_index_buf], eax
popad
jmp .doit2
.readok1:
mov ebp, [esi+8] ; subnode_size
shr ebp, 9
cmp ebp, [ntfs_data.cur_index_size]
jbe .ok2
push esi ebp
push ebp
call kernel_alloc
pop ebp esi
test eax, eax
jz .nomem
mov edi, eax
mov ecx, [ntfs_data.cur_index_size]
shl ecx, 9-2
rep movsd
mov esi, eax
mov [ntfs_data.cur_index_size], ebp
push esi ebp
push [ntfs_data.cur_index_buf]
call kernel_free
pop ebp esi
mov [ntfs_data.cur_index_buf], esi
.ok2:
add esi, 10h
mov ebx, [esp+10h]
mov edx, [esp+14h]
push dword [ebx+4] ; read ANSI/UNICODE name
mov ebx, [ebx]
; init header
mov edi, edx
mov ecx, 32/4
xor eax, eax
rep stosd
mov byte [edx], 1 ; version
mov ecx, [esp+4+18h]
push edx
mov edx, esp
; edi -> BDFE, esi -> current index data, ebp = subnode size, ebx = first wanted block,
; ecx = number of blocks to read
; edx -> parameters block: dd <output>, dd <flags>
cmp [ntfs_cur_iRecord], 5
jz .skip_specials
; dot and dotdot entries
push esi
xor esi, esi
call .add_special_entry
inc esi
call .add_special_entry
pop esi
.skip_specials:
; at first, dump index root
add esi, [esi]
.dump_root:
test byte [esi+0Ch], 2
jnz .dump_root_done
call .add_entry
movzx eax, word [esi+8]
add esi, eax
jmp .dump_root
.dump_root_done:
; now dump all subnodes
push ecx edi
mov edi, ntfs_bitmap_buf
mov [ntfs_cur_buf], edi
mov ecx, 0x400/4
xor eax, eax
rep stosd
mov [ntfs_cur_attr], 0xB0 ; $BITMAP
and [ntfs_cur_offs], 0
mov [ntfs_cur_size], 2
call ntfs_read_attr
pop edi ecx
push 0 ; save offset in $BITMAP attribute
and [ntfs_cur_offs], 0
.dumploop:
mov [ntfs_cur_attr], 0xA0
mov [ntfs_cur_size], ebp
mov eax, [ntfs_data.cur_index_buf]
mov esi, eax
mov [ntfs_cur_buf], eax
push [ntfs_cur_offs]
mov eax, [ntfs_cur_offs]
imul eax, ebp
mov [ntfs_cur_offs], eax
call ntfs_read_attr
pop [ntfs_cur_offs]
mov eax, ebp
shl eax, 9
cmp [ntfs_cur_read], eax
jnz .done
push eax
mov eax, [ntfs_cur_offs]
and eax, 0x400*8-1
bt dword [ntfs_bitmap_buf], eax
pop eax
jnc .dump_subnode_done
cmp dword [esi], 'INDX'
jnz .dump_subnode_done
push ebx
mov ebx, esi
call ntfs_restore_usa
pop ebx
jc .dump_subnode_done
add esi, 0x18
add esi, [esi]
.dump_subnode:
test byte [esi+0Ch], 2
jnz .dump_subnode_done
call .add_entry
movzx eax, word [esi+8]
add esi, eax
jmp .dump_subnode
.dump_subnode_done:
inc [ntfs_cur_offs]
test [ntfs_cur_offs], 0x400*8-1
jnz .dumploop
mov [ntfs_cur_attr], 0xB0
push ecx edi
mov edi, ntfs_bitmap_buf
mov [ntfs_cur_buf], edi
mov ecx, 0x400/4
xor eax, eax
rep stosd
pop edi ecx
pop eax
push [ntfs_cur_offs]
inc eax
mov [ntfs_cur_offs], eax
mov [ntfs_cur_size], 2
push eax
call ntfs_read_attr
pop eax
pop [ntfs_cur_offs]
push eax
jmp .dumploop
.done:
pop eax
pop edx
mov ebx, [edx+4]
pop edx
xor eax, eax
dec ecx
js @f
mov al, ERROR_END_OF_FILE
@@:
mov [esp+1Ch], eax
mov [esp+10h], ebx
popad
ret
.add_special_entry:
mov eax, [edx]
inc dword [eax+8] ; new file found
dec ebx
jns .ret
dec ecx
js .ret
inc dword [eax+4] ; new file block copied
mov eax, [edx+4]
mov [edi+4], eax
; mov eax, dword [ntfs_bitmap_buf+0x20]
; or al, 0x10
mov eax, 0x10
stosd
scasd
push edx
mov eax, dword [ntfs_bitmap_buf]
mov edx, dword [ntfs_bitmap_buf+4]
call ntfs_datetime_to_bdfe
mov eax, dword [ntfs_bitmap_buf+0x18]
mov edx, dword [ntfs_bitmap_buf+0x1C]
call ntfs_datetime_to_bdfe
mov eax, dword [ntfs_bitmap_buf+8]
mov edx, dword [ntfs_bitmap_buf+0xC]
call ntfs_datetime_to_bdfe
pop edx
xor eax, eax
stosd
stosd
mov al, '.'
push edi ecx
lea ecx, [esi+1]
test byte [edi-0x24], 1
jz @f
rep stosw
pop ecx
xor eax, eax
stosw
pop edi
add edi, 520
ret
@@:
rep stosb
pop ecx
xor eax, eax
stosb
pop edi
add edi, 264
.ret:
ret
.add_entry:
; do not return DOS 8.3 names
cmp byte [esi+0x51], 2
jz .ret
; do not return system files
; ... note that there will be no bad effects if system files also were reported ...
cmp dword [esi], 0x10
jb .ret
mov eax, [edx]
inc dword [eax+8] ; new file found
dec ebx
jns .ret
dec ecx
js .ret
inc dword [eax+4] ; new file block copied
mov eax, [edx+4] ; flags
call ntfs_direntry_to_bdfe
push ecx esi edi
movzx ecx, byte [esi+0x50]
add esi, 0x52
test byte [edi-0x24], 1
jz .ansi
shr ecx, 1
rep movsd
adc ecx, ecx
rep movsw
and word [edi], 0
pop edi
add edi, 520
pop esi ecx
ret
.ansi:
jecxz .skip
@@:
lodsw
call uni2ansi_char
stosb
loop @b
.skip:
xor al, al
stosb
pop edi
add edi, 264
pop esi ecx
ret
ntfs_direntry_to_bdfe:
mov [edi+4], eax ; ANSI/UNICODE name
mov eax, [esi+48h]
test eax, 0x10000000
jz @f
and eax, not 0x10000000
or al, 0x10
@@:
stosd
scasd
push edx
mov eax, [esi+0x18]
mov edx, [esi+0x1C]
call ntfs_datetime_to_bdfe
mov eax, [esi+0x30]
mov edx, [esi+0x34]
call ntfs_datetime_to_bdfe
mov eax, [esi+0x20]
mov edx, [esi+0x24]
call ntfs_datetime_to_bdfe
pop edx
mov eax, [esi+0x40]
stosd
mov eax, [esi+0x44]
stosd
ret
iglobal
_24 dd 24
_60 dd 60
_10000000 dd 10000000
days400year dd 365*400+100-4+1
days100year dd 365*100+25-1
days4year dd 365*4+1
days1year dd 365
months dd 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
months2 dd 31, 29, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
_400 dd 400
_100 dd 100
endg
ntfs_datetime_to_bdfe:
; edx:eax = number of 100-nanosecond intervals since January 1, 1601, in UTC
push eax
mov eax, edx
xor edx, edx
div [_10000000]
xchg eax, [esp]
div [_10000000]
pop edx
.sec:
; edx:eax = number of seconds since January 1, 1601
push eax
mov eax, edx
xor edx, edx
div [_60]
xchg eax, [esp]
div [_60]
mov [edi], dl
pop edx
; edx:eax = number of minutes
div [_60]
mov [edi+1], dl
; eax = number of hours (note that 2^64/(10^7*60*60) < 2^32)
xor edx, edx
div [_24]
mov [edi+2], dl
mov [edi+3], byte 0
; eax = number of days since January 1, 1601
xor edx, edx
div [days400year]
imul eax, 400
add eax, 1601
mov [edi+6], ax
mov eax, edx
xor edx, edx
div [days100year]
cmp al, 4
jnz @f
dec eax
add edx, [days100year]
@@:
imul eax, 100
add [edi+6], ax
mov eax, edx
xor edx, edx
div [days4year]
shl eax, 2
add [edi+6], ax
mov eax, edx
xor edx, edx
div [days1year]
cmp al, 4
jnz @f
dec eax
add edx, [days1year]
@@:
add [edi+6], ax
push esi edx
mov esi, months
movzx eax, word [edi+6]
test al, 3
jnz .noleap
xor edx, edx
push eax
div [_400]
pop eax
test edx, edx
jz .leap
xor edx, edx
div [_100]
test edx, edx
jz .noleap
.leap:
mov esi, months2
.noleap:
pop edx
xor eax, eax
inc eax
@@:
sub edx, [esi]
jb @f
add esi, 4
inc eax
jmp @b
@@:
add edx, [esi]
pop esi
inc edx
mov [edi+4], dl
mov [edi+5], al
add edi, 8
ret
;----------------------------------------------------------------
;
; ntfs_HdRewrite - write to NTFS hard disk
;
; esi points to filename
; ebx ignored (reserved)
; ecx number of bytes to write, 0+
; edx mem location to data
;
; ret ebx = number of written bytes
; eax = 0 ok read or other = errormsg
;
;--------------------------------------------------------------
ntfs_HdRewrite:
xor ebx, ebx
mov eax, ERROR_UNSUPPORTED_FS
ret
;----------------------------------------------------------------
;
; ntfs_HdWrite - write to NTFS hard disk
;
; esi points to filename
; ebx pointer to 64-bit number = first wanted byte, 0+
; may be ebx=0 - start from first byte
; ecx number of bytes to write, 0+
; edx mem location to data
;
; ret ebx = bytes written (maybe 0)
; eax = 0 ok write or other = errormsg
;
;--------------------------------------------------------------
ntfs_HdWrite:
xor ebx, ebx
mov eax, ERROR_UNSUPPORTED_FS
ret
;----------------------------------------------------------------
;
; ntfs_HdSetFileEnd - set end of file on NTFS hard disk
;
; esi points to filename
; ebx points to 64-bit number = new file size
; ecx ignored (reserved)
; edx ignored (reserved)
;
; ret eax = 0 ok or other = errormsg
;
;--------------------------------------------------------------
ntfs_HdSetFileEnd:
ntfs_HdSetFileInfo:
;----------------------------------------------------------------
;
; ntfs_HdDelete - delete file or empty folder from NTFS hard disk
;
; esi points to filename
;
; ret eax = 0 ok or other = errormsg
;
;--------------------------------------------------------------
ntfs_HdDelete:
mov eax, ERROR_UNSUPPORTED_FS
ret
ntfs_HdGetFileInfo:
cmp byte [esi], 0
jnz @f
push 2
pop eax
ret
@@:
call ntfs_find_lfn
jnc .doit
push ERROR_FILE_NOT_FOUND
pop eax
cmp [hd_error], 0
jz @f
mov al, 11
@@:
ret
.doit:
push esi edi
mov esi, eax
mov edi, edx
xor eax, eax
call ntfs_direntry_to_bdfe
pop edi esi
xor eax, eax
ret