kolibri-ahci: upload first results on AHCI support

git-svn-id: svn://kolibrios.org@9020 a494cfbc-eb01-0410-851d-a64ba20cac60
This commit is contained in:
Rustem Gimadutdinov (rgimad) 2021-07-07 21:53:12 +00:00
parent 73864ff1d7
commit 21816f5c0b
5 changed files with 208 additions and 0 deletions

View File

@ -0,0 +1,190 @@
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2004-2021. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
$Revision$
PCI_REG_STATUS_COMMAND = 0x0004
PCI_REG_BAR5 = 0x0024
AHCI_BOHCf_BOS = 0 ; BIOS-Owned Semaphore (BIOS owns controller)
AHCI_BOHCf_OOS = 1 ; OS-Owned Semaphore (OS owns controller)
AHCI_BOHCf_BB = 4 ; BIOS Busy (polling bit while BIOS cleans up
AHCI_CAP2_BOH = 0 ; number of bit in BOH which shows Supports BIOS/OS Handoff
HBA_MEMORY_SIZE = 0x1100
struct AHCI_DATA
;;
abar dd ? ; pointer to HBA Memory (BAR5) mapped to virtual kernelspace memory
pcidev dd ? ; pointer to corresponding PCIDEV structure
ends
; Generic Host Control registers
struct HBA_MEM
capability dd ? ; 0x00
global_host_control dd ? ; 0x04
interrupt_status dd ? ; 0x08
port_implemented dd ? ; 0x0C
version dd ? ; 0x10
ccc_ctl dd ? ; 0x14, Command completion coalescing control
ccc_pts dd ? ; 0x18, Command completion coalescing ports
em_loc dd ? ; 0x1C, Enclosure management location
em_ctl dd ? ; 0x20, Enclosure management control
capability2 dd ? ; 0x24, Host capabilities extended
bohc dd ? ; 0x28, BIOS/OS handoff control and status
reserved rb (0xA0-0x2C) ; 0x2C - 0x9F, Reserved
vendor rb (0x100-0xA0) ; 0xA0 - 0xFF, Vendor specific
ports rb (sizeof.HBA_PORT*32) ; 0x100 - 0x10FF, Port control registers, max 32
ends
; Port Control registers
struct HBA_PORT
command_list_base_l dd ? ; 0x00, command list base address, 1K-byte aligned
command_list_base_h dd ? ; 0x04, command list base address upper 32 bits, used on 64 bit systems
fis_base_l dd ? ; 0x08, FIS base address, 256-byte aligned
fis_base_h dd ? ; 0x0C, FIS base address upper 32 bits, used on 64 bit systems
interrupt_status dd ? ; 0x10
interrupt_enable dd ? ; 0x14
command dd ? ; 0x18, command and status
reserved0 dd ? ; 0x1C
task_file_data dd ? ; 0x20
signature dd ? ; 0x24
sata_status dd ? ; 0x28, SATA status (SCR0:SStatus)
sata_control dd ? ; 0x2C, SATA control (SCR2:SControl)
sata_error dd ? ; 0x30, SATA error (SCR1:SError)
sata_active dd ? ; 0x34, SATA active (SCR3:SActive)
command_issue dd ? ; 0x38
sata_notification dd ? ; 0x3C, SATA notification (SCR4:SNotification)
fis_based_switch_control dd ? ; 0x40
reserved1 rd 11 ; 0x44 - 0x6F
vendor rd 4 ; 0x70 - 0x7F, vendor specific
ends
uglobal
align 4
ahci_controller AHCI_DATA
endg
; detect ahci controller and initialize
align 4
init_ahci:
mov ecx, ahci_controller
mov esi, pcidev_list
.find_ahci_ctr:
mov esi, [esi + PCIDEV.fd]
cmp esi, pcidev_list
jz .ahci_ctr_not_found
mov eax, [esi + PCIDEV.class]
;DEBUGF 1, "K: device class = %x\n", eax
shr eax, 8 ; shift right because lowest 8 bits if ProgIf field
cmp eax, 0x0106 ; 0x01 - Mass Storage Controller class, 0x06 - Serial ATA Controller subclass
jz .ahci_ctr_found
jmp .find_ahci_ctr
.ahci_ctr_not_found:
DEBUGF 1, "K: AHCI controller not found\n"
ret
.ahci_ctr_found:
mov [ahci_controller + AHCI_DATA.pcidev], esi
mov eax, [esi+PCIDEV.class]
movzx ebx, byte [esi+PCIDEV.bus]
movzx ecx, byte [esi+PCIDEV.devfn]
shr ecx, 3 ; get rid of 3 lowest bits (function code), the rest bits is device code
movzx edx, byte [esi+PCIDEV.devfn]
and edx, 00000111b ; get only 3 lowest bits (function code)
DEBUGF 1, "K: found AHCI controller, (class, subcl, progif) = %x, bus = %x, device = %x, function = %x\n", eax, ebx, ecx, edx
mov ah, [esi + PCIDEV.bus]
mov al, 2 ; read dword
mov bh, [esi + PCIDEV.devfn]
mov bl, PCI_REG_BAR5
call pci_read_reg
DEBUGF 1, "K: AHCI controller BAR5 = %x\n", eax
stdcall map_io_mem, eax, HBA_MEMORY_SIZE, PG_SWR + PG_NOCACHE
mov [ahci_controller + AHCI_DATA.abar], eax
DEBUGF 1, "K: AHCI controller BAR5 mapped to virtual addr %x\n", eax
mov ah, [esi + PCIDEV.bus]
mov al, 2 ; read dword
mov bh, [esi + PCIDEV.devfn]
mov bl, PCI_REG_STATUS_COMMAND
call pci_read_reg
DEBUGF 1, "K: AHCI: pci_status_command = %x\nEnabling interrupts, DMA bus mastering and memory space access\n", eax
or eax, 0x06 ; pci.command |= 0x06 (dma bus mastering + memory space access)
btr eax, 10 ; clear the "disable interrupts" bit
DEBUGF 1, "K: AHCI: pci_status_command = %x\n", eax
mov ecx, eax
mov ah, [esi + PCIDEV.bus]
mov al, 2 ; write dword
mov bh, [esi + PCIDEV.devfn]
mov bl, PCI_REG_STATUS_COMMAND
call pci_write_reg
mov eax, [ahci_controller + AHCI_DATA.abar]
mov ebx, [eax + HBA_MEM.capability]
mov ecx, [eax + HBA_MEM.global_host_control]
mov edx, [eax + HBA_MEM.version]
DEBUGF 1, "K: AHCI: HBA.cap = %x, HBA.ghc = %x, HBA_MEM.version = %x\n", ebx, ecx, edx
; //Transferring ownership from BIOS if supported.
; if (Bt(&hba->caps_ext, AHCI_CAPSEXTf_BOH))
; {
; Bts(&hba->bohc, AHCI_BOHCf_OOS);
; "AHCI: Transferring ownership from BIOS\n";
; while (Bt(&hba->bohc, AHCI_BOHCf_BOS));
; Sleep(25);
; if (Bt(&hba->bohc, AHCI_BOHCf_BB)) //if Bios Busy is still set after 25 mS, wait 2 seconds.
; Sleep(2000);
; }
; Transferring ownership from BIOS if supported. (TODO check)
mov eax, [ahci_controller + AHCI_DATA.abar]
mov ebx, [eax + HBA_MEM.capability2]
DEBUGF 1, "K: AHCI: HBA_MEM.cap2 = %x\n", ebx
bt dword [eax + HBA_MEM.capability2], AHCI_CAP2_BOH
jnc .end_handoff
DEBUGF 1, "K: AHCI: Transferring ownership from BIOS...\n"
bts dword [eax + HBA_MEM.bohc], AHCI_BOHCf_OOS
.wait_not_bos:
bt dword [eax + HBA_MEM.bohc], AHCI_BOHCf_BOS
jc .wait_not_bos
mov ebx, 3
call delay_hs
; if Bios Busy is still set after 25 mS, wait 2 seconds.
bt dword [eax + HBA_MEM.bohc], AHCI_BOHCf_BB
jnc @f
mov ebx, 200
call delay_hs
@@:
DEBUGF 1, "K: AHCI: Done.\n"
.end_handoff:
;; TODO: Reset controller ?
;; TODO enble AHCI ? (see https://github.com/ZenithOS/ZenithOS/blob/4ea8b133613ab95a8b53ed543d8e63525a21954e/src/Kernel/BlkDev/DiskAHCI.CC#L719)
;; TODO: find drives (see https://github.com/ZenithOS/ZenithOS/blob/4ea8b133613ab95a8b53ed543d8e63525a21954e/src/Kernel/BlkDev/DiskAHCI.CC#L742)
ret

View File

@ -0,0 +1,9 @@
#!/bin/sh
KERPACK=/home/programist/KOS_SVN/programs/other/kpack/kerpack_linux/kerpack
KOLIBRI_IMG=kolibri_test2.img
echo 'lang fix en' > lang.inc
fasm -m 65536 bootbios.asm bootbios.bin
fasm -m 65536 kernel.asm kernel.mnt
$KERPACK kernel.mnt kernel.mnt
mcopy -D o -i $KOLIBRI_IMG kernel.mnt ::kernel.mnt

View File

@ -814,6 +814,13 @@ include 'detect/dev_fd.inc'
;----------------------------------------------------------------------------- ;-----------------------------------------------------------------------------
include 'detect/init_ata.inc' include 'detect/init_ata.inc'
;----------------------------------------------------------------------------- ;-----------------------------------------------------------------------------
; initialisation AHCI code
;-----------------------------------------------------------------------------
jmp ahci_code_end
include 'blkdev/ahci.inc'
ahci_code_end:
call init_ahci
;-----------------------------------------------------------------------------
if 0 if 0
mov ax, [BOOT.sys_disk] mov ax, [BOOT.sys_disk]
cmp ax, 'r1'; if using not ram disk, then load librares and parameters {SPraid.simba} cmp ax, 'r1'; if using not ram disk, then load librares and parameters {SPraid.simba}

View File

@ -0,0 +1 @@
qemu-system-i386 -m 256 -fda kolibri_test2.img -boot a -vga vmware -net nic,model=rtl8139 -net user -soundhw ac97 -usb -usbdevice tablet -enable-kvm -drive file=fat:rw:.

View File

@ -0,0 +1 @@
qemu-system-i386 -m 256 -M q35 -fda kolibri_test2.img -boot a -vga vmware -net nic,model=rtl8139 -net user -soundhw ac97 -usb -usbdevice tablet -enable-kvm -drive file=fat:rw:.