MTD80x driver: MAC address is now read correctly, Fixed bug in transmit procedure.

git-svn-id: svn://kolibrios.org@4576 a494cfbc-eb01-0410-851d-a64ba20cac60
This commit is contained in:
hidnplayr 2014-02-19 15:48:17 +00:00
parent 3dd1f86eac
commit 632a2c43e3

View File

@ -25,8 +25,8 @@ format MS COFF
__DEBUG__ = 1
__DEBUG_LEVEL__ = 2
NUM_TX_DESC = 4
NUM_RX_DESC = 4
NUM_TX_DESC = 6
NUM_RX_DESC = 12
include '../struct.inc'
include '../macros.inc'
@ -646,8 +646,8 @@ reset:
test eax, eax
jnz @f
DEBUGF 1,"Could not attach int handler!\n"
; or eax, -1
; ret
or eax, -1
ret
@@:
; Reset the chip to erase previous misconfiguration.
@ -663,8 +663,8 @@ reset:
; Initialize other registers.
; Configure the PCI bus bursts and FIFO thresholds.
mov [device.bcrvalue], 0x10 ; little-endian, 8 burst length
mov [device.crvalue], 0xa00 ; 128 burst length
mov [device.bcrvalue], 0x10 ; little-endian, 8 burst length
mov [device.crvalue], 0xa00 ; 128 burst length
cmp [device.dev_id], 0x891
jne @f
@ -699,11 +699,9 @@ reset:
set_io 0
set_io ISR
mov eax, (FBE or TUNF or CNTOVF or RBU or TI or RI)
mov eax, FBE or TUNF or CNTOVF or RBU or TI or RI
out dx, eax
set_io IMR
; mov eax, (FBE or TUNF or CNTOVF or RBU or TI or RI)
out dx, eax
; clear packet/byte counters
@ -782,7 +780,7 @@ init_ring:
GetRealAddr
pop esi ecx
mov [esi + mtd_desc.next_desc], eax
mov [esi + mtd_desc.skbuff], 0
add esi, mtd_desc.size
loop .tx_desc_loop
@ -1015,46 +1013,36 @@ transmit:
ja .fail
mov esi, [device.cur_tx]
test [esi + mtd_desc.status], TXOWN
jnz .fail
push [esi + mtd_desc.next_desc_logical]
pop [device.cur_tx]
; todo: check if descriptor is not owned by the device!
mov eax, [esp + 4]
mov [esi + mtd_desc.skbuff], eax
GetRealAddr
mov [esi + mtd_desc.buffer], eax
mov eax, [esp + 8]
mov ecx, eax
shl eax, PKTSShift ; packet size
or eax, TXLD + TXFD + CRCEnable + PADEnable + TXIC + 1536 shl TBSShift ; buffer size
shl ecx, TBSShift
or eax, ecx
or eax, TXIC + TXLD + TXFD + CRCEnable + PADEnable
mov [esi + mtd_desc.control], eax
mov [esi + mtd_desc.status], TXOWN
;-------------
; Update stats
inc [device.packets_tx]
mov eax, [esp+8]
add dword [device.bytes_tx], eax
adc dword [device.bytes_tx + 4], 0
; Point to transmit descriptor
; TX Poll
set_io 0
set_io TXLBA
mov eax, esi
GetRealAddr
out dx, eax
; set_io TCRRCR
; mov eax, [device.crvalue]
; out dx, eax
; Wake the potentially-idle transmit channel.
set_io TXPDR ; TX Poll
set_io TXPDR
xor eax, eax
out dx, eax
@ -1077,11 +1065,8 @@ read_mac:
set_io PAR0
lea edi, [device.mac]
insd
stosd
set_io PAR1
insw
stosw
DEBUGF 1,"MAC = %x-%x-%x-%x-%x-%x\n",\
[device.mac+0]:2,[device.mac+1]:2,[device.mac+2]:2,[device.mac+3]:2,[device.mac+4]:2,[device.mac+5]:2
@ -1105,7 +1090,7 @@ int_handler:
push ebx esi edi
DEBUGF 1,"int\n"
DEBUGF 1,"INT\n"
; find pointer of device wich made IRQ occur
@ -1138,50 +1123,43 @@ int_handler:
test ax, RI ; receive interrupt
jz .no_rx
DEBUGF 1,"Receive interrupt\n"
.rx:
push ax
.rx_loop:
mov esi, [device.cur_rx]
test [esi + mtd_desc.status], RXOWN
jnz .fail_rx
push ebx
push .rx_complete
mov ecx, [esi + mtd_desc.status]
shr ecx, FLNGShift
sub ecx, 4 ; we dont need CRC
push ecx
DEBUGF 1,"Received %u bytes\n", ecx
;-------------
; Update stats
add dword [device.bytes_rx], ecx
adc dword [device.bytes_rx + 4], 0
inc dword [device.packets_rx]
add dword[device.bytes_rx], ecx
adc dword[device.bytes_rx + 4], 0
inc [device.packets_rx]
push [esi + mtd_desc.skbuff]
jmp Eth_input
.rx_complete:
pop ebx
mov esi, [device.cur_rx]
mov [esi + mtd_desc.control], 1536 shl RBSShift
push esi
stdcall KernelAlloc, 1536
pop esi
mov [esi + mtd_desc.skbuff], eax
call GetPgAddr
mov [esi + mtd_desc.buffer], eax
mov [esi + mtd_desc.status], RXOWN
mov eax, [esi + mtd_desc.next_desc_logical]
mov [device.cur_rx], eax
push [esi + mtd_desc.next_desc_logical]
pop [device.cur_rx]
jmp .rx_loop
;
@ -1195,47 +1173,35 @@ int_handler:
; outl(0, mtdx.ioaddr + RXPDR);
.fail_rx:
DEBUGF 1,"RX failed\n"
DEBUGF 1,"RX done\n"
pop ax
.no_rx:
.no_rx:
test ax, TI ; transmit interrupt
jz .no_tx
DEBUGF 1,"Transmit interrupt\n"
DEBUGF 1,"TX\n"
push ax
lea esi, [device.tx_desc]
mov ecx, NUM_TX_DESC
.tx_loop:
test [esi + mtd_desc.status], TXOWN
jnz .skip_this_one
mov eax, [esi + mtd_desc.skbuff]
test eax, eax
je .skip_this_one
mov [esi + mtd_desc.skbuff], 0
DEBUGF 1,"freeing buffer:%x\n", eax
DEBUGF 1,"freeing buffer: 0x%x\n", eax
stdcall KernelFree, eax
.skip_this_one:
mov esi, [esi + mtd_desc.next_desc_logical]
loop .tx_loop
pop ax
.no_tx:
test ax, TBU
jz .no_tbu
DEBUGF 1,"Transmit buffer unavailable!\n"
.no_tbu:
; test ax, TBU
; jz .no_tbu
; DEBUGF 2,"Transmit buffer unavailable!\n"
; .no_tbu:
.fail:
pop edi esi ebx