Fixed PS/2 mouse detection procedure, timeouts.

git-svn-id: svn://kolibrios.org@121 a494cfbc-eb01-0410-851d-a64ba20cac60
This commit is contained in:
Ivan Poddubny 2006-08-14 08:34:49 +00:00
parent 28e25be617
commit 857f757f85

View File

@ -1,112 +1,117 @@
; for information on PS2 mouse/keyboard programming
; refer to http://www.computer-engineering.org/ps2mouse/
; and http://www.computer-engineering.org/ps2keyboard/
; respectively
MouseSearch_PS2:
jmp .begin
jmp MouseSearch_PS2_begin
.kb_cmd_c:
mouse_error equ MouseSearch_PS2_begin.error
kb_cmd_c:
call kb_cmd
.check:
cmp ah, 1
je @f
ret
@@:
add esp, 4 ; return address
jmp .DataInputError
jmp check_kbd
.kb_write_c:
kb_write_c:
call kb_write
jmp .check
jmp check_kbd
.kb_read_c:
kb_read_c:
call kb_read
jmp .check
;jmp check_kbd
;--------------------------------------------
.begin:
check_kbd:
cmp ah, 1
je mouse_error
ret
uglobal
mouse_cmd_byte db 0
mouse_nr_tries db 0
mouse_nr_resends db 0
mouse_error_esp dd 0
endg
mouse_cmd:
mov [mouse_cmd_byte], al
mov [mouse_nr_resends], 5
.resend:
mov bl, 0xd4
call kb_cmd_c
mov al, [mouse_cmd_byte]
call kb_write_c
call mouse_read
cmp al, 0xFA ; ack
jne .noack
ret
.noack:
cmp al, 0xFE ; resend
jne .noresend
dec [mouse_nr_resends]
jnz .resend
.noresend:
jmp mouse_error
mouse_read:
mov [mouse_nr_tries], 100
.repeat:
call kb_read
cmp ah, 1
jne .fin
mov esi, 10
call delay_ms
dec [mouse_nr_tries]
jnz .repeat
jmp mouse_error
.fin:
ret
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
MouseSearch_PS2_begin:
pushad
mov [mouse_error_esp], esp
mov bl, 0xAD ; disable keyboard interface
call .kb_cmd_c
call kb_cmd_c
mov bl, 0xa8 ; enable mouse interface
call .kb_cmd_c
mov bl, 0xA8 ; enable mouse interface
call kb_cmd_c
mov bl, 0xd4 ; to mouse
call .kb_cmd_c
mov al, 0xFF ; reset
call .kb_write_c
call .kb_read_c
cmp al, 0xFA ; ack
jne .no_ack
call mouse_cmd
; now the mouse is in Reset Mode
; get the Basic Assurance Test completion code
call .kb_read_c
call mouse_read
cmp al, 0xAA
jne .dead_mouse
jne .error ; dead mouse
; get device ID
call .kb_read_c
call mouse_read
cmp al, 0x00
jne .unknown_device
jne .error ; unknown device
; reset completed successfully
; enable mouse interrupt - IRQ12
mov bl, 0x20 ; read command byte
call .kb_cmd_c
call .kb_read_c
or al, 10b ; set mouse IRQ bit
call kb_cmd_c
call kb_read_c
or al, 10b
push eax
mov bl, 0x60 ; write command byte
call .kb_cmd_c
call kb_cmd_c
pop eax
call .kb_write_c
call kb_write_c
mov bl, 0xd4 ; to mouse
call .kb_cmd_c
mov al, 0xf4 ; enable data reporting
call .kb_write_c
call .kb_read_c
cmp al, 0xFA
jne .no_ack
; jmp @f
;.set_sample_rate:
; push eax
; mov bl, 0xd4 ; to mouse
; call .kb_cmd_c
; mov al, 0xF3 ; set sample rate
; call .kb_write_c
; call .kb_read_c ; ack
; pop eax
; call .kb_write_c
; call .kb_read_c ; ack
; @@:
; mov eax, 200
; call .set_sample_rate
; mov eax, 100
; call .set_sample_rate
; mov eax, 80
; call .set_sample_rate
; mov bl, 0xd4
; call .kb_cmd_c
; mov al, 0xF2 ; read device type
; call .kb_write_c
; call .kb_read_c ; ack
; call .kb_read_c ; mouse ID
; cmp al, 0x03
; jne .no_scroll
; mov [ps2_mouse_scroll], 1
; ; it'll send 4-byte packets instead of 3-byte ones
; ; the last byte of a packet represents z-axis movement
; .no_scroll:
mov al, 0xF4 ; enable data reporting
call mouse_cmd
mov [ps2_mouse_detected], 1
mov bl, 0xAE ; enable keyboard interface
call .kb_cmd_c
call kb_cmd
mov esi, boot_setmouse_type
call boot_log
@ -114,10 +119,8 @@ MouseSearch_PS2:
jmp .finish
.DataInputError:
.no_ack:
.dead_mouse:
.unknown_device:
.error:
mov esp, [mouse_error_esp] ; clear stack frame
mov [ps2_mouse_detected], 0
mov bl, 0xA7 ; disable mouse interface
call kb_cmd