forked from KolibriOS/kolibrios
Some refactoring of DEC21x4x driver.
git-svn-id: svn://kolibrios.org@3201 a494cfbc-eb01-0410-851d-a64ba20cac60
This commit is contained in:
hidnplayr
parent
a8ad5846a9
commit
a52b2728a7
@ -23,6 +23,13 @@ format MS COFF
|
||||
|
||||
MAX_DEVICES = 16
|
||||
|
||||
RX_DES_COUNT = 4 ; no of RX descriptors, must be power of 2
|
||||
RX_BUFF_SIZE = 2048 ; size of buffer for each descriptor, must be multiple of 4 and <= 2048 TDES1_TBS1_MASK
|
||||
|
||||
TX_DES_COUNT = 4 ; no of TX descriptors, must be power of 2
|
||||
TX_BUFF_SIZE = 2048 ; size of buffer for each descriptor, used for memory allocation only
|
||||
|
||||
|
||||
DEBUG = 1
|
||||
__DEBUG__ = 1
|
||||
__DEBUG_LEVEL__ = 1
|
||||
@ -83,39 +90,39 @@ CSR15 = 0x78 ; Watchdog timer
|
||||
;--------bits/commands of CSR0-------------------
|
||||
CSR0_RESET = 1b
|
||||
|
||||
CSR0_WIE = 1 SHL 24 ; Write and Invalidate Enable
|
||||
CSR0_RLE = 1 SHL 23 ; PCI Read Line Enable
|
||||
CSR0_RML = 1 SHL 21 ; PCI Read Multiple
|
||||
CSR0_WIE = 1 shl 24 ; Write and Invalidate Enable
|
||||
CSR0_RLE = 1 shl 23 ; PCI Read Line Enable
|
||||
CSR0_RML = 1 shl 21 ; PCI Read Multiple
|
||||
|
||||
CSR0_CACHEALIGN_NONE = 00b SHL 14
|
||||
CSR0_CACHEALIGN_32 = 01b SHL 14
|
||||
CSR0_CACHEALIGN_64 = 10b SHL 14
|
||||
CSR0_CACHEALIGN_128 = 11b SHL 14
|
||||
CSR0_CACHEALIGN_NONE = 00b shl 14
|
||||
CSR0_CACHEALIGN_32 = 01b shl 14
|
||||
CSR0_CACHEALIGN_64 = 10b shl 14
|
||||
CSR0_CACHEALIGN_128 = 11b shl 14
|
||||
|
||||
; using values from linux driver.. :P
|
||||
CSR0_DEFAULT = CSR0_WIE+CSR0_RLE+CSR0_RML+CSR0_CACHEALIGN_NONE ;32
|
||||
; using values from linux driver..
|
||||
CSR0_DEFAULT = CSR0_WIE + CSR0_RLE + CSR0_RML + CSR0_CACHEALIGN_NONE
|
||||
|
||||
;------- CSR5 -STATUS- bits --------------------------------
|
||||
CSR5_TI = 1 SHL 0 ; Transmit interupt - frame transmition completed
|
||||
CSR5_TPS = 1 SHL 1 ; Transmit process stopped
|
||||
CSR5_TU = 1 SHL 2 ; Transmit Buffer unavailable
|
||||
CSR5_TJT = 1 SHL 3 ; Transmit Jabber Timeout (transmitter had been excessively active)
|
||||
CSR5_UNF = 1 SHL 5 ; Transmit underflow - FIFO underflow
|
||||
CSR5_RI = 1 SHL 6 ; Receive Interrupt
|
||||
CSR5_RU = 1 SHL 7 ; Receive Buffer unavailable
|
||||
CSR5_RPS = 1 SHL 8 ; Receive Process stopped
|
||||
CSR5_RWT = 1 SHL 9 ; Receive Watchdow Timeout
|
||||
CSR5_ETI = 1 SHL 10 ; Early transmit Interrupt
|
||||
CSR5_GTE = 1 SHL 11 ; General Purpose Timer Expired
|
||||
CSR5_FBE = 1 SHL 13 ; Fatal bus error
|
||||
CSR5_ERI = 1 SHL 14 ; Early receive Interrupt
|
||||
CSR5_AIS = 1 SHL 15 ; Abnormal interrupt summary
|
||||
CSR5_NIS = 1 SHL 16 ; normal interrupt summary
|
||||
CSR5_RS_SH = 1 SHL 17 ; Receive process state -shift
|
||||
CSR5_TI = 1 shl 0 ; Transmit interupt - frame transmition completed
|
||||
CSR5_TPS = 1 shl 1 ; Transmit process stopped
|
||||
CSR5_TU = 1 shl 2 ; Transmit Buffer unavailable
|
||||
CSR5_TJT = 1 shl 3 ; Transmit Jabber Timeout (transmitter had been excessively active)
|
||||
CSR5_UNF = 1 shl 5 ; Transmit underflow - FIFO underflow
|
||||
CSR5_RI = 1 shl 6 ; Receive Interrupt
|
||||
CSR5_RU = 1 shl 7 ; Receive Buffer unavailable
|
||||
CSR5_RPS = 1 shl 8 ; Receive Process stopped
|
||||
CSR5_RWT = 1 shl 9 ; Receive Watchdow Timeout
|
||||
CSR5_ETI = 1 shl 10 ; Early transmit Interrupt
|
||||
CSR5_GTE = 1 shl 11 ; General Purpose Timer Expired
|
||||
CSR5_FBE = 1 shl 13 ; Fatal bus error
|
||||
CSR5_ERI = 1 shl 14 ; Early receive Interrupt
|
||||
CSR5_AIS = 1 shl 15 ; Abnormal interrupt summary
|
||||
CSR5_NIS = 1 shl 16 ; normal interrupt summary
|
||||
CSR5_RS_SH = 17 ; Receive process state -shift
|
||||
CSR5_RS_MASK = 111b ; -mask
|
||||
CSR5_TS_SH = 1 SHL 20 ; Transmit process state -shift
|
||||
CSR5_TS_SH = 20 ; Transmit process state -shift
|
||||
CSR5_TS_MASK = 111b ; -mask
|
||||
CSR5_EB_SH = 1 SHL 23 ; Error bits -shift
|
||||
CSR5_EB_SH = 23 ; Error bits -shift
|
||||
CSR5_EB_MASK = 111b ; Error bits -mask
|
||||
|
||||
;CSR5 TS values
|
||||
@ -128,60 +135,61 @@ CSR5_TS_SUSPENDED = 110b
|
||||
CSR5_TS_RUNNING_CLOSING_DESC = 111b
|
||||
|
||||
;------- CSR6 -OPERATION MODE- bits --------------------------------
|
||||
CSR6_HP = 1 SHL 0 ; Hash/Perfect Receive Filtering mode
|
||||
CSR6_SR = 1 SHL 1 ; Start/Stop receive
|
||||
CSR6_HO = 1 SHL 2 ; Hash only Filtering mode
|
||||
CSR6_PB = 1 SHL 3 ; Pass bad frames
|
||||
CSR6_IF = 1 SHL 4 ; Inverse filtering
|
||||
CSR6_SB = 1 SHL 5 ; Start/Stop backoff counter
|
||||
CSR6_PR = 1 SHL 6 ; Promiscuos mode -default after reset
|
||||
CSR6_PM = 1 SHL 7 ; Pass all multicast
|
||||
CSR6_F = 1 SHL 9 ; Full Duplex mode
|
||||
CSR6_OM_SH = 1 SHL 10 ; Operating Mode -shift
|
||||
CSR6_HP = 1 shl 0 ; Hash/Perfect Receive Filtering mode
|
||||
CSR6_SR = 1 shl 1 ; Start/Stop receive
|
||||
CSR6_HO = 1 shl 2 ; Hash only Filtering mode
|
||||
CSR6_PB = 1 shl 3 ; Pass bad frames
|
||||
CSR6_IF = 1 shl 4 ; Inverse filtering
|
||||
CSR6_SB = 1 shl 5 ; Start/Stop backoff counter
|
||||
CSR6_PR = 1 shl 6 ; Promiscuos mode -default after reset
|
||||
CSR6_PM = 1 shl 7 ; Pass all multicast
|
||||
CSR6_F = 1 shl 9 ; Full Duplex mode
|
||||
CSR6_OM_SH = 10 ; Operating Mode -shift
|
||||
CSR6_OM_MASK = 11b ; -mask
|
||||
CSR6_FC = 1 SHL 12 ; Force Collision Mode
|
||||
CSR6_ST = 1 SHL 13 ; Start/Stop Transmission Command
|
||||
CSR6_TR_SH = 1 SHL 14 ; Threshold Control -shift
|
||||
CSR6_FC = 1 shl 12 ; Force Collision Mode
|
||||
CSR6_ST = 1 shl 13 ; Start/Stop Transmission Command
|
||||
CSR6_TR_SH = 14 ; Threshold Control -shift
|
||||
CSR6_TR_MASK = 11b ; -mask
|
||||
CSR6_CA = 1 SHL 17 ; Capture Effect Enable
|
||||
CSR6_PS = 1 SHL 18 ; Port select SRL / MII/SYM
|
||||
CSR6_HBD = 1 SHL 19 ; Heartbeat Disable
|
||||
CSR6_SF = 1 SHL 21 ; Store and Forward -transmit full packet only
|
||||
CSR6_TTM = 1 SHL 22 ; Transmit Threshold Mode -
|
||||
CSR6_PCS = 1 SHL 23 ; PCS active and MII/SYM port operates in symbol mode
|
||||
CSR6_SCR = 1 SHL 24 ; Scrambler Mode
|
||||
CSR6_MBO = 1 SHL 25 ; Must Be One
|
||||
CSR6_RA = 1 SHL 30 ; Receive All
|
||||
CSR6_SC = 1 SHL 31 ; Special Capture Effect Enable
|
||||
CSR6_CA = 1 shl 17 ; Capture Effect Enable
|
||||
CSR6_PS = 1 shl 18 ; Port select SRL / MII/SYM
|
||||
CSR6_HBD = 1 shl 19 ; Heartbeat Disable
|
||||
CSR6_SF = 1 shl 21 ; Store and Forward -transmit full packet only
|
||||
CSR6_TTM = 1 shl 22 ; Transmit Threshold Mode -
|
||||
CSR6_PCS = 1 shl 23 ; PCS active and MII/SYM port operates in symbol mode
|
||||
CSR6_SCR = 1 shl 24 ; Scrambler Mode
|
||||
CSR6_MBO = 1 shl 25 ; Must Be One
|
||||
CSR6_RA = 1 shl 30 ; Receive All
|
||||
CSR6_SC = 1 shl 31 ; Special Capture Effect Enable
|
||||
|
||||
|
||||
;------- CSR7 -INTERRUPT ENABLE- bits --------------------------------
|
||||
CSR7_TI = 1 SHL 0 ; transmit Interrupt Enable (set with CSR7<16> & CSR5<0> )
|
||||
CSR7_TS = 1 SHL 1 ; transmit Stopped Enable (set with CSR7<15> & CSR5<1> )
|
||||
CSR7_TU = 1 SHL 2 ; transmit buffer underrun Enable (set with CSR7<16> & CSR5<2> )
|
||||
CSR7_TJ = 1 SHL 3 ; transmit jabber timeout enable (set with CSR7<15> & CSR5<3> )
|
||||
CSR7_UN = 1 SHL 5 ; underflow Interrupt enable (set with CSR7<15> & CSR5<5> )
|
||||
CSR7_RI = 1 SHL 6 ; receive Interrupt enable (set with CSR7<16> & CSR5<5> )
|
||||
CSR7_RU = 1 SHL 7 ; receive buffer unavailable enable (set with CSR7<15> & CSR5<7> )
|
||||
CSR7_RS = 1 SHL 8 ; Receive stopped enable (set with CSR7<15> & CSR5<8> )
|
||||
CSR7_RW = 1 SHL 9 ; receive watchdog timeout enable (set with CSR7<15> & CSR5<9> )
|
||||
CSR7_ETE = 1 SHL 10 ; Early transmit Interrupt enable (set with CSR7<15> & CSR5<10> )
|
||||
CSR7_GPT = 1 SHL 11 ; general purpose timer enable (set with CSR7<15> & CSR5<11> )
|
||||
CSR7_FBE = 1 SHL 13 ; Fatal bus error enable (set with CSR7<15> & CSR5<13> )
|
||||
CSR7_ERE = 1 SHL 14 ; Early receive enable (set with CSR7<16> & CSR5<14> )
|
||||
CSR7_AI = 1 SHL 15 ; Abnormal Interrupt Summary Enable (enables CSR5<0,3,7,8,9,10,13>)
|
||||
CSR7_NI = 1 SHL 16 ; Normal Interrup Enable (enables CSR5<0,2,6,11,14>)
|
||||
CSR7_TI = 1 shl 0 ; transmit Interrupt Enable (set with CSR7<16> & CSR5<0> )
|
||||
CSR7_TS = 1 shl 1 ; transmit Stopped Enable (set with CSR7<15> & CSR5<1> )
|
||||
CSR7_TU = 1 shl 2 ; transmit buffer underrun Enable (set with CSR7<16> & CSR5<2> )
|
||||
CSR7_TJ = 1 shl 3 ; transmit jabber timeout enable (set with CSR7<15> & CSR5<3> )
|
||||
CSR7_UN = 1 shl 5 ; underflow Interrupt enable (set with CSR7<15> & CSR5<5> )
|
||||
CSR7_RI = 1 shl 6 ; receive Interrupt enable (set with CSR7<16> & CSR5<5> )
|
||||
CSR7_RU = 1 shl 7 ; receive buffer unavailable enable (set with CSR7<15> & CSR5<7> )
|
||||
CSR7_RS = 1 shl 8 ; Receive stopped enable (set with CSR7<15> & CSR5<8> )
|
||||
CSR7_RW = 1 shl 9 ; receive watchdog timeout enable (set with CSR7<15> & CSR5<9> )
|
||||
CSR7_ETE = 1 shl 10 ; Early transmit Interrupt enable (set with CSR7<15> & CSR5<10> )
|
||||
CSR7_GPT = 1 shl 11 ; general purpose timer enable (set with CSR7<15> & CSR5<11> )
|
||||
CSR7_FBE = 1 shl 13 ; Fatal bus error enable (set with CSR7<15> & CSR5<13> )
|
||||
CSR7_ERE = 1 shl 14 ; Early receive enable (set with CSR7<16> & CSR5<14> )
|
||||
CSR7_AI = 1 shl 15 ; Abnormal Interrupt Summary Enable (enables CSR5<0,3,7,8,9,10,13>)
|
||||
CSR7_NI = 1 shl 16 ; Normal Interrup Enable (enables CSR5<0,2,6,11,14>)
|
||||
|
||||
CSR7_DEFAULT = CSR7_TI + CSR7_TS + CSR7_RI + CSR7_RS + CSR7_TU + CSR7_TJ + CSR7_UN + \
|
||||
CSR7_RU + CSR7_RW + CSR7_FBE + CSR7_AI + CSR7_NI
|
||||
|
||||
;----------- descriptor structure ---------------------
|
||||
struc DES {
|
||||
.DES0 DD ? ; bit 31 is 'own' and rest is 'status'
|
||||
.DES1 DD ? ; control bits + bytes-count buffer 1 + bytes-count buffer 2
|
||||
.DES2 DD ? ; pointer to buffer1
|
||||
.DES3 DD ? ; pointer to buffer2 or in this case to next descriptor, as we use a chained structure
|
||||
.realaddr dd ?
|
||||
.size = 64
|
||||
.status dd ? ; bit 31 is 'own' and rest is 'status'
|
||||
.length dd ? ; control bits + bytes-count buffer 1 + bytes-count buffer 2
|
||||
.buffer1 dd ? ; pointer to buffer1
|
||||
.buffer2 dd ? ; pointer to buffer2 or in this case to next descriptor, as we use a chained structure
|
||||
.virtaddr dd ?
|
||||
.size = 64 ; 64, for alignment purposes
|
||||
}
|
||||
|
||||
virtual at 0
|
||||
@ -189,83 +197,78 @@ virtual at 0
|
||||
end virtual
|
||||
|
||||
;common to Rx and Tx
|
||||
DES0_OWN = 1 SHL 31 ; if set, the NIC controls the descriptor, otherwise driver 'owns' the descriptors
|
||||
DES0_OWN = 1 shl 31 ; if set, the NIC controls the descriptor, otherwise driver 'owns' the descriptors
|
||||
|
||||
;receive
|
||||
RDES0_ZER = 1 SHL 0 ; must be 0 if legal length :D
|
||||
RDES0_CE = 1 SHL 1 ; CRC error, valid only on last desc (RDES0<8>=1)
|
||||
RDES0_DB = 1 SHL 2 ; dribbling bit - not multiple of 8 bits, valid only on last desc (RDES0<8>=1)
|
||||
RDES0_RE = 1 SHL 3 ; Report on MII error.. i dont realy know what this means :P
|
||||
RDES0_RW = 1 SHL 4 ; received watchdog timer expiration - must set CSR5<9>, valid only on last desc (RDES0<8>=1)
|
||||
RDES0_FT = 1 SHL 5 ; frame type: 0->IEEE802.0 (len<1500) 1-> ETHERNET frame (len>1500), valid only on last desc (RDES0<8>=1)
|
||||
RDES0_CS = 1 SHL 6 ; Collision seen, valid only on last desc (RDES0<8>=1)
|
||||
RDES0_TL = 1 SHL 7 ; Too long(>1518)-NOT AN ERROR, valid only on last desc (RDES0<8>=1)
|
||||
RDES0_LS = 1 SHL 8 ; Last descriptor of current frame
|
||||
RDES0_FS = 1 SHL 9 ; First descriptor of current frame
|
||||
RDES0_MF = 1 SHL 10 ; Multicast frame, valid only on last desc (RDES0<8>=1)
|
||||
RDES0_RF = 1 SHL 11 ; Runt frame, valid only on last desc (RDES0<8>=1) and id overflow
|
||||
RDES0_DT_SERIAL = 00b SHL 12 ; Data type-Serial recv frame, valid only on last desc (RDES0<8>=1)
|
||||
RDES0_DT_INTERNAL = 01b SHL 12 ; Data type-Internal loopback recv frame, valid only on last desc (RDES0<8>=1)
|
||||
RDES0_DT_EXTERNAL = 11b SHL 12 ; Data type-External loopback recv frame, valid only on last desc (RDES0<8>=1)
|
||||
RDES0_DE = 1 SHL 14 ; Descriptor error - cant own a new desc and frame doesnt fit, valid only on last desc (RDES0<8>=1)
|
||||
RDES0_ES = 1 SHL 15 ; Error Summmary - bits 1+6+11+14, valid only on last desc (RDES0<8>=1)
|
||||
RDES0_ZER = 1 shl 0 ; must be 0 if legal length :D
|
||||
RDES0_CE = 1 shl 1 ; CRC error, valid only on last desc (RDES0<8>=1)
|
||||
RDES0_DB = 1 shl 2 ; dribbling bit - not multiple of 8 bits, valid only on last desc (RDES0<8>=1)
|
||||
RDES0_RE = 1 shl 3 ; Report on MII error.. i dont realy know what this means :P
|
||||
RDES0_RW = 1 shl 4 ; received watchdog timer expiration - must set CSR5<9>, valid only on last desc (RDES0<8>=1)
|
||||
RDES0_FT = 1 shl 5 ; frame type: 0->IEEE802.0 (len<1500) 1-> ETHERNET frame (len>1500), valid only on last desc (RDES0<8>=1)
|
||||
RDES0_CS = 1 shl 6 ; Collision seen, valid only on last desc (RDES0<8>=1)
|
||||
RDES0_TL = 1 shl 7 ; Too long(>1518)-NOT AN ERROR, valid only on last desc (RDES0<8>=1)
|
||||
RDES0_LS = 1 shl 8 ; Last descriptor of current frame
|
||||
RDES0_FS = 1 shl 9 ; First descriptor of current frame
|
||||
RDES0_MF = 1 shl 10 ; Multicast frame, valid only on last desc (RDES0<8>=1)
|
||||
RDES0_RF = 1 shl 11 ; Runt frame, valid only on last desc (RDES0<8>=1) and id overflow
|
||||
RDES0_DT_SERIAL = 00b shl 12 ; Data type-Serial recv frame, valid only on last desc (RDES0<8>=1)
|
||||
RDES0_DT_INTERNAL = 01b shl 12 ; Data type-Internal loopback recv frame, valid only on last desc (RDES0<8>=1)
|
||||
RDES0_DT_EXTERNAL = 11b shl 12 ; Data type-External loopback recv frame, valid only on last desc (RDES0<8>=1)
|
||||
RDES0_DE = 1 shl 14 ; Descriptor error - cant own a new desc and frame doesnt fit, valid only on last desc (RDES0<8>=1)
|
||||
RDES0_ES = 1 shl 15 ; Error Summmary - bits 1+6+11+14, valid only on last desc (RDES0<8>=1)
|
||||
RDES0_FL_SH = 16 ; Field length shift, valid only on last desc (RDES0<8>=1)
|
||||
RDES0_FL_MASK = 11111111111111b ; Field length mask (+CRC), valid only on last desc (RDES0<8>=1)
|
||||
RDES0_FF = 1 SHL 30 ; Filtering fail-frame failed address recognition test(must CSR6<30>=1), valid only on last desc (RDES0<8>=1)
|
||||
RDES0_FF = 1 shl 30 ; Filtering fail-frame failed address recognition test(must CSR6<30>=1), valid only on last desc (RDES0<8>=1)
|
||||
|
||||
RDES1_RBS1_MASK = 11111111111b ; firsd buffer size MASK
|
||||
RDES1_RBS2_SH = 1 SHL 11 ; second buffer size SHIFT
|
||||
RDES1_RBS1_MASK = 11111111111b ; first buffer size MASK
|
||||
RDES1_RBS2_SH = 11 ; second buffer size SHIFT
|
||||
RDES1_RBS2_MASK = 11111111111b ; second buffer size MASK
|
||||
RDES1_RCH = 1 SHL 24 ; Second address chained - second address (buffer) is next desc address
|
||||
RDES1_RER = 1 SHL 25 ; Receive End of Ring - final descriptor, NIC must return to first desc
|
||||
RDES1_RCH = 1 shl 24 ; Second address chained - second address (buffer) is next desc address
|
||||
RDES1_RER = 1 shl 25 ; Receive End of Ring - final descriptor, NIC must return to first desc
|
||||
|
||||
;transmition
|
||||
TDES0_DE = 1 SHL 0 ; Deffered
|
||||
TDES0_UF = 1 SHL 1 ; Underflow error
|
||||
TDES0_LF = 1 SHL 2 ; Link fail report (only if CSR6<23>=1)
|
||||
TDES0_DE = 1 shl 0 ; Deffered
|
||||
TDES0_UF = 1 shl 1 ; Underflow error
|
||||
TDES0_LF = 1 shl 2 ; Link fail report (only if CSR6<23>=1)
|
||||
TDES0_CC_SH = 3 ; Collision Count shift - no of collision before transmition
|
||||
TDES0_CC_MASK = 1111b ; Collision Count mask
|
||||
TDES0_HF = 1 SHL 7 ; Heartbeat fail
|
||||
TDES0_EC = 1 SHL 8 ; Excessive Collisions - >16 collisions
|
||||
TDES0_LC = 1 SHL 9 ; Late collision
|
||||
TDES0_NC = 1 SHL 10 ; No carrier
|
||||
TDES0_LO = 1 SHL 11 ; Loss of carrier
|
||||
TDES0_TO = 1 SHL 14 ; Transmit Jabber Timeout
|
||||
TDES0_ES = 1 SHL 15 ; Error summary TDES0<1+8+9+10+11+14>=1
|
||||
TDES0_HF = 1 shl 7 ; Heartbeat fail
|
||||
TDES0_EC = 1 shl 8 ; Excessive Collisions - >16 collisions
|
||||
TDES0_LC = 1 shl 9 ; Late collision
|
||||
TDES0_NC = 1 shl 10 ; No carrier
|
||||
TDES0_LO = 1 shl 11 ; Loss of carrier
|
||||
TDES0_TO = 1 shl 14 ; Transmit Jabber Timeout
|
||||
TDES0_ES = 1 shl 15 ; Error summary TDES0<1+8+9+10+11+14>=1
|
||||
|
||||
TDES1_TBS1_MASK = 11111111111b ; Buffer 1 size mask
|
||||
TDES1_TBS2_SH = 11 ; Buffer 2 size shift
|
||||
TDES1_TBS2_MASK = 11111111111b ; Buffer 2 size mask
|
||||
TDES1_FT0 = 1 SHL 22 ; Filtering type 0
|
||||
TDES1_DPD = 1 SHL 23 ; Disabled padding for packets <64bytes, no padding
|
||||
TDES1_TCH = 1 SHL 24 ; Second address chained - second buffer pointer is to next desc
|
||||
TDES1_TER = 1 SHL 25 ; Transmit end of ring - final descriptor
|
||||
TDES1_AC = 1 SHL 26 ; Add CRC disable -pretty obvious
|
||||
TDES1_SET = 1 SHL 27 ; Setup packet
|
||||
TDES1_FT1 = 1 SHL 28 ; Filtering type 1
|
||||
TDES1_FS = 1 SHL 29 ; First segment - buffer is first segment of frame
|
||||
TDES1_LS = 1 SHL 30 ; Last segment
|
||||
TDES1_IC = 1 SHL 31 ; Interupt on completion (CSR5<0>=1) valid when TDES1<30>=1
|
||||
TDES1_FT0 = 1 shl 22 ; Filtering type 0
|
||||
TDES1_DPD = 1 shl 23 ; Disabled padding for packets <64bytes, no padding
|
||||
TDES1_TCH = 1 shl 24 ; Second address chained - second buffer pointer is to next desc
|
||||
TDES1_TER = 1 shl 25 ; Transmit end of ring - final descriptor
|
||||
TDES1_AC = 1 shl 26 ; Add CRC disable -pretty obvious
|
||||
TDES1_SET = 1 shl 27 ; Setup packet
|
||||
TDES1_FT1 = 1 shl 28 ; Filtering type 1
|
||||
TDES1_FS = 1 shl 29 ; First segment - buffer is first segment of frame
|
||||
TDES1_LS = 1 shl 30 ; Last segment
|
||||
TDES1_IC = 1 shl 31 ; Interupt on completion (CSR5<0>=1) valid when TDES1<30>=1
|
||||
|
||||
MAX_ETH_FRAME_SIZE = 1514
|
||||
|
||||
RX_DES_COUNT = 4 ; no of RX descriptors, must be power of 2
|
||||
RX_BUFF_SIZE = 2048 ; size of buffer for each descriptor, must be multiple of 4 and <= 2048 TDES1_TBS1_MASK
|
||||
TX_DES_COUNT = 4 ; no of TX descriptors, must be power of 2
|
||||
TX_BUFF_SIZE = 2048 ; size of buffer for each descriptor, used for memory allocation only
|
||||
|
||||
RX_MEM_TOTAL_SIZE = RX_DES_COUNT*(DES.size+RX_BUFF_SIZE)
|
||||
TX_MEM_TOTAL_SIZE = TX_DES_COUNT*(DES.size+TX_BUFF_SIZE)
|
||||
|
||||
;=============================================================================
|
||||
; serial ROM operations
|
||||
;=============================================================================
|
||||
CSR9_SR = 1 SHL 11 ; SROM Select
|
||||
CSR9_RD = 1 SHL 14 ; ROM Read Operation
|
||||
CSR9_SROM_DO = 1 SHL 3 ; Data Out for SROM
|
||||
CSR9_SROM_DI = 1 SHL 2 ; Data In to SROM
|
||||
CSR9_SROM_CK = 1 SHL 1 ; clock for SROM
|
||||
CSR9_SROM_CS = 1 SHL 0 ; chip select.. always needed
|
||||
CSR9_SR = 1 shl 11 ; SROM Select
|
||||
CSR9_RD = 1 shl 14 ; ROM Read Operation
|
||||
CSR9_SROM_DO = 1 shl 3 ; Data Out for SROM
|
||||
CSR9_SROM_DI = 1 shl 2 ; Data In to SROM
|
||||
CSR9_SROM_CK = 1 shl 1 ; clock for SROM
|
||||
CSR9_SROM_CS = 1 shl 0 ; chip select.. always needed
|
||||
|
||||
; assume dx is CSR9
|
||||
macro SROM_Delay {
|
||||
@ -298,7 +301,7 @@ macro Bit_Set a_bit {
|
||||
|
||||
macro Bit_Clear a_bit {
|
||||
in eax, dx
|
||||
and eax, NOT (a_bit)
|
||||
and eax, not (a_bit)
|
||||
out dx, eax
|
||||
}
|
||||
|
||||
@ -527,13 +530,11 @@ probe:
|
||||
movzx eax, [device.pci_bus]
|
||||
movzx ecx, [device.pci_dev]
|
||||
stdcall PciRead32, eax ,ecx ,0 ; get device/vendor id
|
||||
|
||||
DEBUGF 1,"Vendor id: 0x%x\n", ax
|
||||
|
||||
cmp ax, 0x1011
|
||||
jne .notfound
|
||||
shr eax, 16
|
||||
|
||||
DEBUGF 1,"Vendor ok!, device id: 0x%x\n", ax ; TODO: use another method to detect chip!
|
||||
|
||||
cmp ax, 0x0009
|
||||
@ -620,87 +621,7 @@ reset:
|
||||
set_io 0
|
||||
status
|
||||
|
||||
;------------------------------------------
|
||||
; Setup RX descriptors (use chained method)
|
||||
|
||||
mov eax, [device.rx_p_des]
|
||||
call GetPgAddr
|
||||
mov edx, eax
|
||||
lea esi, [eax + RX_DES_COUNT*(DES.size)] ; jump over RX descriptors
|
||||
|
||||
mov eax, [device.rx_p_des]
|
||||
add eax, RX_DES_COUNT*(DES.size) ; jump over RX descriptors
|
||||
|
||||
mov edi, [device.rx_p_des]
|
||||
mov ecx, RX_DES_COUNT
|
||||
|
||||
push edx ;;
|
||||
.loop_rx_des:
|
||||
add edx, DES.size
|
||||
mov [edi + DES.DES0], DES0_OWN ; hardware owns buffer
|
||||
mov [edi + DES.DES1], 1984 + RDES1_RCH ; only size of first buffer, chained buffers
|
||||
mov [edi + DES.DES2], esi ; hw buffer address
|
||||
mov [edi + DES.DES3], edx ; pointer to next descriptor
|
||||
mov [edi + DES.realaddr], eax ; virtual buffer address
|
||||
|
||||
DEBUGF 1,"RX desc %u, buff addr: %x, next desc: %x, real buff addr: %x, real descr addr: %x \n", ecx, esi, edx, eax, edi
|
||||
|
||||
add esi, RX_BUFF_SIZE
|
||||
add eax, RX_BUFF_SIZE
|
||||
add edi, DES.size
|
||||
dec ecx
|
||||
jnz .loop_rx_des
|
||||
|
||||
; set last descriptor as LAST
|
||||
sub edi, DES.size
|
||||
or [edi + DES.DES1], RDES1_RER ; EndOfRing
|
||||
pop edx
|
||||
mov [edi + DES.DES3], edx
|
||||
|
||||
;---------------------
|
||||
; Setup TX descriptors
|
||||
|
||||
mov eax, [device.tx_p_des]
|
||||
call GetPgAddr
|
||||
mov edx, eax
|
||||
lea esi, [eax + TX_DES_COUNT*(DES.size)] ; jump over TX descriptors
|
||||
|
||||
mov eax, [device.tx_p_des]
|
||||
add eax, TX_DES_COUNT*(DES.size) ; jump over TX descriptors
|
||||
|
||||
mov edi, [device.tx_p_des]
|
||||
mov ecx, TX_DES_COUNT
|
||||
|
||||
push edx
|
||||
.loop_tx_des:
|
||||
add edx, DES.size
|
||||
mov [edi + DES.DES0], 0 ; owned by driver
|
||||
mov [edi + DES.DES1], TDES1_TCH ; chained method
|
||||
mov [edi + DES.DES2], esi ; pointer to buffer
|
||||
mov [edi + DES.DES3], edx ; pointer to next descr
|
||||
mov [edi + DES.realaddr], eax
|
||||
|
||||
DEBUGF 1,"TX desc %u, buff addr: %x, next desc: %x, real buff addr: %x, real descr addr: %x \n", ecx, esi, edx, eax, edi
|
||||
|
||||
add esi, TX_BUFF_SIZE
|
||||
add eax, TX_BUFF_SIZE
|
||||
add edi, DES.size
|
||||
dec ecx
|
||||
jnz .loop_tx_des
|
||||
|
||||
; set last descriptor as LAST
|
||||
sub edi, DES.size
|
||||
or [edi + DES.DES1], TDES1_TER ; EndOfRing
|
||||
pop edx
|
||||
mov [edi + DES.DES3], edx
|
||||
|
||||
;------------------
|
||||
; Reset descriptors
|
||||
|
||||
mov [device.tx_wr_des], 0
|
||||
mov [device.tx_rd_des], 0
|
||||
mov [device.rx_crt_des], 0
|
||||
mov [device.tx_free_des], TX_DES_COUNT
|
||||
call init_ring
|
||||
|
||||
;--------------------------------------------
|
||||
; setup CSR3 & CSR4 (pointers to descriptors)
|
||||
@ -709,13 +630,13 @@ reset:
|
||||
status
|
||||
set_io CSR3
|
||||
mov eax, [device.rx_p_des]
|
||||
call GetPgAddr
|
||||
GetRealAddr
|
||||
DEBUGF 1,"RX descriptor base address: %x\n", eax
|
||||
out dx, eax
|
||||
|
||||
set_io CSR4
|
||||
mov eax, [device.tx_p_des]
|
||||
call GetPgAddr
|
||||
GetRealAddr
|
||||
DEBUGF 1,"TX descriptor base address: %x\n", eax
|
||||
out dx, eax
|
||||
|
||||
@ -744,7 +665,6 @@ reset:
|
||||
|
||||
call start_link
|
||||
|
||||
|
||||
; wait a bit
|
||||
mov esi, 3000
|
||||
call Sleep
|
||||
@ -769,6 +689,85 @@ reset:
|
||||
ret
|
||||
|
||||
|
||||
|
||||
align 4
|
||||
init_ring:
|
||||
|
||||
;------------------------------------------
|
||||
; Setup RX descriptors (use chained method)
|
||||
|
||||
mov eax, [device.rx_p_des]
|
||||
GetRealAddr
|
||||
mov edx, eax
|
||||
push eax
|
||||
lea esi, [eax + RX_DES_COUNT*(DES.size)] ; jump over RX descriptors
|
||||
mov eax, [device.rx_p_des]
|
||||
add eax, RX_DES_COUNT*(DES.size) ; jump over RX descriptors
|
||||
mov edi, [device.rx_p_des]
|
||||
mov ecx, RX_DES_COUNT
|
||||
.loop_rx_des:
|
||||
add edx, DES.size
|
||||
mov [edi + DES.status], DES0_OWN ; hardware owns buffer
|
||||
mov [edi + DES.length], 1984 + RDES1_RCH ; only size of first buffer, chained buffers
|
||||
mov [edi + DES.buffer1], esi ; hw buffer address
|
||||
mov [edi + DES.buffer2], edx ; pointer to next descriptor
|
||||
mov [edi + DES.virtaddr], eax ; virtual buffer address
|
||||
DEBUGF 1,"RX desc: buff addr: %x, next desc: %x, real buff addr: %x, real descr addr: %x \n", esi, edx, eax, edi
|
||||
|
||||
add esi, RX_BUFF_SIZE
|
||||
add eax, RX_BUFF_SIZE
|
||||
add edi, DES.size
|
||||
dec ecx
|
||||
jnz .loop_rx_des
|
||||
|
||||
; set last descriptor as LAST
|
||||
sub edi, DES.size
|
||||
or [edi + DES.length], RDES1_RER ; EndOfRing
|
||||
pop [edi + DES.buffer2] ; point it to the first descriptor
|
||||
|
||||
;---------------------
|
||||
; Setup TX descriptors
|
||||
|
||||
mov eax, [device.tx_p_des]
|
||||
GetRealAddr
|
||||
mov edx, eax
|
||||
push eax
|
||||
lea esi, [eax + TX_DES_COUNT*(DES.size)] ; jump over TX descriptors
|
||||
mov eax, [device.tx_p_des]
|
||||
add eax, TX_DES_COUNT*(DES.size) ; jump over TX descriptors
|
||||
mov edi, [device.tx_p_des]
|
||||
mov ecx, TX_DES_COUNT
|
||||
.loop_tx_des:
|
||||
add edx, DES.size
|
||||
mov [edi + DES.status], 0 ; owned by driver
|
||||
mov [edi + DES.length], TDES1_TCH ; chained method
|
||||
mov [edi + DES.buffer1], esi ; pointer to buffer
|
||||
mov [edi + DES.buffer2], edx ; pointer to next descr
|
||||
mov [edi + DES.virtaddr], eax
|
||||
DEBUGF 1,"TX desc: buff addr: %x, next desc: %x, virt buff addr: %x, virt descr addr: %x \n", esi, edx, eax, edi
|
||||
|
||||
add esi, TX_BUFF_SIZE
|
||||
add eax, TX_BUFF_SIZE
|
||||
add edi, DES.size
|
||||
dec ecx
|
||||
jnz .loop_tx_des
|
||||
|
||||
; set last descriptor as LAST
|
||||
sub edi, DES.size
|
||||
or [edi + DES.length], TDES1_TER ; EndOfRing
|
||||
pop [edi + DES.buffer2] ; point it to the first descriptor
|
||||
|
||||
;------------------
|
||||
; Reset descriptors
|
||||
|
||||
mov [device.tx_wr_des], 0
|
||||
mov [device.tx_rd_des], 0
|
||||
mov [device.rx_crt_des], 0
|
||||
mov [device.tx_free_des], TX_DES_COUNT
|
||||
|
||||
ret
|
||||
|
||||
|
||||
align 4
|
||||
start_link:
|
||||
|
||||
@ -813,7 +812,7 @@ Send_Setup_Packet:
|
||||
; and go to next descriptor for real setup packet... ;; TODO: check if 2 descriptors are available
|
||||
|
||||
; cmp [device.tx_packets], 0
|
||||
; je .not_first
|
||||
; je .first
|
||||
;
|
||||
; and [edi+DES.des1], 0
|
||||
; mov [edi+DES.des0], DES0_OWN
|
||||
@ -835,21 +834,20 @@ Send_Setup_Packet:
|
||||
; mul edx
|
||||
; add edi, eax
|
||||
|
||||
.not_first:
|
||||
.first:
|
||||
|
||||
push edi
|
||||
; copy setup packet to current descriptor
|
||||
mov edi, [edi+DES.realaddr]
|
||||
; copy once the address
|
||||
mov edi, [edi + DES.virtaddr]
|
||||
; copy the address once
|
||||
lea esi, [device.mac]
|
||||
DEBUGF 1,"copying packet to %x from %x\n", edi, esi
|
||||
mov ecx, 3 ; mac is 6 bytes thus 3 words
|
||||
.loop:
|
||||
DEBUGF 1,"%x ", [esi]:4
|
||||
movsw
|
||||
dec esi
|
||||
dec esi
|
||||
movsw
|
||||
inc edi
|
||||
inc edi
|
||||
dec ecx
|
||||
jnz .loop
|
||||
|
||||
@ -864,13 +862,13 @@ Send_Setup_Packet:
|
||||
|
||||
; setup descriptor
|
||||
DEBUGF 1,"setting up descriptor\n"
|
||||
mov [edi + DES.DES1], TDES1_IC + TDES1_SET + TDES1_TCH + 192 ; size must be EXACTLY 192 bytes
|
||||
mov [edi + DES.DES0], DES0_OWN
|
||||
mov [edi + DES.length], TDES1_IC + TDES1_SET + TDES1_TCH + 192 ; size must be EXACTLY 192 bytes
|
||||
mov [edi + DES.status], DES0_OWN
|
||||
|
||||
DEBUGF 1,"TDES0: %x\n", [edi + DES.DES0]:8
|
||||
DEBUGF 1,"TDES1: %x\n", [edi + DES.DES1]:8
|
||||
DEBUGF 1,"TDES2: %x\n", [edi + DES.DES2]:8
|
||||
DEBUGF 1,"TDES3: %x\n", [edi + DES.DES3]:8
|
||||
DEBUGF 1,"status: %x\n", [edi + DES.status]:8
|
||||
DEBUGF 1,"length: %x\n", [edi + DES.length]:8
|
||||
DEBUGF 1,"buffer1: %x\n", [edi + DES.buffer1]:8
|
||||
DEBUGF 1,"buffer2: %x\n", [edi + DES.buffer2]:8
|
||||
|
||||
; go to next descriptor
|
||||
inc [device.tx_wr_des]
|
||||
@ -895,7 +893,7 @@ Send_Setup_Packet:
|
||||
.already_started:
|
||||
; if already started, issue a Transmit Poll command
|
||||
set_io CSR1
|
||||
mov eax, 0
|
||||
xor eax, eax
|
||||
DEBUGF 1,"Issuing transmit poll command\n"
|
||||
.do_it:
|
||||
out dx, eax
|
||||
@ -940,21 +938,21 @@ transmit:
|
||||
mov edx, DES.size
|
||||
mul edx
|
||||
add eax, [device.tx_p_des]
|
||||
mov edi, [eax+DES.realaddr] ; pointer to buffer
|
||||
mov edi, [eax + DES.virtaddr] ; pointer to buffer
|
||||
mov esi, [esp+4]
|
||||
mov ecx, [esp+8]
|
||||
DEBUGF 1,"copying %u bytes from %x to %x\n", ecx, esi, edi
|
||||
rep movsb
|
||||
|
||||
; set packet size
|
||||
mov ecx, [eax+DES.DES1]
|
||||
mov ecx, [eax+DES.length]
|
||||
and ecx, TDES1_TER ; preserve 'End of Ring' bit
|
||||
or ecx, [esp+8] ; set size
|
||||
or ecx, TDES1_FS or TDES1_LS or TDES1_IC or TDES1_TCH ; first descr, last descr, interrupt on complete, chained modus
|
||||
mov [eax+DES.DES1], ecx
|
||||
mov [eax+DES.length], ecx
|
||||
|
||||
; set descriptor info
|
||||
mov [eax+DES.DES0], DES0_OWN ; say it is now owned by the 21x4x
|
||||
mov [eax+DES.status], DES0_OWN ; say it is now owned by the 21x4x
|
||||
|
||||
; start tx
|
||||
set_io 0
|
||||
@ -1043,7 +1041,7 @@ int_handler:
|
||||
;----------------------------------
|
||||
; TX ok?
|
||||
|
||||
test eax, CSR5_TI
|
||||
test ax, CSR5_TI
|
||||
jz .not_tx
|
||||
push ax esi ecx
|
||||
|
||||
@ -1063,7 +1061,7 @@ int_handler:
|
||||
cmp [device.tx_free_des], TX_DES_COUNT
|
||||
jz .end_tx
|
||||
|
||||
mov eax, [edi+DES.DES0]
|
||||
mov eax, [edi+DES.status]
|
||||
|
||||
; we stop at first desc that is owned be NIC
|
||||
test eax, DES0_OWN
|
||||
@ -1101,22 +1099,25 @@ int_handler:
|
||||
;----------------------------------
|
||||
; RX irq
|
||||
.not_tx:
|
||||
test eax, CSR5_RI
|
||||
test ax, CSR5_RI
|
||||
jz .not_rx
|
||||
push ax esi ecx
|
||||
|
||||
DEBUGF 1,"RX ok!\n"
|
||||
|
||||
;go to current descriptor
|
||||
mov edi, [device.rx_p_des]
|
||||
push ebx
|
||||
.rx_loop:
|
||||
pop ebx
|
||||
|
||||
; get current descriptor
|
||||
mov edi, [device.rx_p_des]
|
||||
mov eax, [device.rx_crt_des]
|
||||
mov edx, DES.size
|
||||
mul edx
|
||||
add edi, eax
|
||||
|
||||
.loop_rx_start_of_packet:
|
||||
mov eax, [edi+DES.DES0]
|
||||
; now check status
|
||||
mov eax, [edi + DES.status]
|
||||
|
||||
test eax, DES0_OWN
|
||||
jnz .end_rx ; current desc is busy, nothing to do
|
||||
@ -1127,24 +1128,14 @@ int_handler:
|
||||
test eax, RDES0_LS ; if not last desc of packet, error for now
|
||||
jz .end_rx
|
||||
|
||||
; .IF ZERO?
|
||||
; ODS2 <"Net_Interrupt: packet > 1 descriptor, not supported yet :P">
|
||||
; jmp @@end_rx
|
||||
; .ENDIF
|
||||
|
||||
test eax, RDES0_ES
|
||||
jnz .end_rx
|
||||
|
||||
; .IF !ZERO?
|
||||
; ODS2 <"Net_Interrupt: RX error">
|
||||
; jmp @@end_rx
|
||||
; .ENDIF
|
||||
|
||||
mov esi, [edi+DES.realaddr]
|
||||
mov ecx, [edi+DES.DES0]
|
||||
mov esi, [edi + DES.virtaddr]
|
||||
mov ecx, [edi + DES.status]
|
||||
shr ecx, RDES0_FL_SH
|
||||
and ecx, RDES0_FL_MASK
|
||||
sub ecx, 4 ; crc
|
||||
sub ecx, 4 ; crc, we dont need it
|
||||
|
||||
DEBUGF 1,"Received packet!, size=%u, addr:%x\n", ecx, esi
|
||||
|
||||
@ -1154,14 +1145,13 @@ int_handler:
|
||||
test eax, eax
|
||||
jz .fail
|
||||
|
||||
push edi
|
||||
push dword .continue_rx
|
||||
push ebx
|
||||
push dword .rx_loop
|
||||
push ecx eax
|
||||
mov edi, eax
|
||||
|
||||
; update statistics
|
||||
inc [device.packets_rx]
|
||||
|
||||
add dword [device.bytes_rx], ecx
|
||||
adc dword [device.bytes_rx + 4], 0
|
||||
|
||||
@ -1176,21 +1166,12 @@ int_handler:
|
||||
.nw:
|
||||
rep movsd
|
||||
|
||||
jmp Eth_input
|
||||
mov [edi + DES.status], DES0_OWN ; free descriptor
|
||||
|
||||
.continue_rx:
|
||||
pop edi
|
||||
|
||||
; free descriptor
|
||||
mov [edi+DES.DES0], DES0_OWN
|
||||
|
||||
; next descriptor
|
||||
add edi, DES.size
|
||||
|
||||
inc [device.rx_crt_des]
|
||||
inc [device.rx_crt_des] ; next descriptor
|
||||
and [device.rx_crt_des], RX_DES_COUNT-1
|
||||
|
||||
jmp .loop_rx_start_of_packet
|
||||
jmp Eth_input
|
||||
|
||||
.end_rx:
|
||||
.fail:
|
||||
|
||||
Loading…
Reference in New Issue
Block a user