;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; Copyright (C) KolibriOS team 2004-2024. All rights reserved. ;; Kernel programmers are acknowledged in CREDITS.TXT ;; ;; Data in this file was originally part of MenuetOS project which is ;; distributed under the terms of GNU GPL. It is modified and redistributed as ;; part of KolibriOS project under the terms of GNU GPL. ;; ;; Copyright (C) MenuetOS 2000-2004 Ville Mikael Turjanmaa ;; ;; KolibriOS is distributed in the hope that it will be useful, but WITHOUT ANY ;; WARRANTY. No author or distributor accepts responsibility to anyone for the ;; consequences of using it or for whether it serves any particular purpose or ;; works at all, unless he says so in writing. Refer to the GNU General Public ;; License (the "GPL") for full details. ; ;; Everyone is granted permission to copy, modify and redistribute KolibriOS, ;; but only under the conditions described in the GPL. A copy of this license ;; is supposed to have been given to you along with KolibriOS so you can know ;; your rights and responsibilities. It should be in a file named COPYING. ;; Among other things, the copyright notice and this notice must be preserved ;; on all copies. ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; format binary as "mnt" include 'macros.inc' include 'struct.inc' $Revision$ USE_COM_IRQ = 1 ; make irq 3 and irq 4 available for PCI devices VESA_1_2_VIDEO = 0 ; enable vesa 1.2 bank switch functions ; Enabling the next line will enable serial output console ;debug_com_base = 0x3f8 ; 0x3f8 is com1, 0x2f8 is com2, 0x3e8 is com3, ; 0x2e8 is com4, no irq's are used include "proc32.inc" include "kglobals.inc" include "lang.inc" include "encoding.inc" include "const.inc" iglobal ; The following variable, if equal to 1, duplicates debug output to the screen. debug_direct_print db 0 ; Start the first app (LAUNCHER) after kernel is loaded? (1=yes, 2 or 0=no) launcher_start db 1 endg max_processes = 255 tss_step = 128 + 8192 ; tss & i/o - 65535 ports, * 256=557056*4 os_stack = os_data_l - gdts ; GDTs os_code = os_code_l - gdts graph_data = 3 + graph_data_l - gdts tss0 = tss0_l - gdts app_code = 3 + app_code_l - gdts app_data = 3 + app_data_l - gdts app_tls = 3 + tls_data_l - gdts pci_code_sel = pci_code_32-gdts pci_data_sel = pci_data_32-gdts ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; Included files: ;; ;; Kernel16.inc ;; - Booteng.inc English text for bootup ;; - Bootcode.inc Hardware setup ;; - Pci16.inc PCI functions ;; ;; Kernel32.inc ;; - Sys32.inc Process management ;; - Shutdown.inc Shutdown and restart ;; - Fat32.inc Read / write hd ;; - Vesa12.inc Vesa 1.2 driver ;; - Vesa20.inc Vesa 2.0 driver ;; - Vga.inc VGA driver ;; - Stack.inc Network interface ;; - Mouse.inc Mouse pointer ;; - Scincode.inc Window skinning ;; - Pci32.inc PCI functions ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; That is a loading and initialization code that also draws the blue screen ; menu with svn revision number near top right corner of the screen. include "bootbios.inc" use32 org $+KERNEL_BASE align 4 B32: mov ax, os_stack ; Selector for os mov ds, ax mov es, ax mov fs, ax mov gs, ax mov ss, ax mov esp, TMP_STACK_TOP ; Set stack ; CLEAR 0x280000 - HEAP_BASE xor eax, eax mov edi, CLEAN_ZONE mov ecx, (HEAP_BASE - OS_BASE - CLEAN_ZONE) / 4 cld rep stosd ; CLEAR KERNEL UNDEFINED GLOBALS mov edi, endofcode - OS_BASE mov ecx, 0x90000 sub ecx, edi shr ecx, 2 rep stosd ; SAVE & CLEAR 0-0xffff mov edi, 0x1000 mov ecx, 0x8000 / 4 rep stosd mov edi, 0xa000 mov ecx, 0x6000 / 4 rep stosd call test_cpu bts [cpu_caps - OS_BASE], CAPS_TSC ;force use rdtsc call acpi_locate call init_BIOS32 ; MEMORY MODEL call mem_test call init_mem call init_page_map ; ENABLE PAGING mov eax, sys_proc - OS_BASE + PROC.pdt_0 mov cr3, eax mov eax, cr0 or eax, CR0_PG + CR0_WP mov cr0, eax lgdt [gdts] jmp pword os_code:high_code align 4 bios32_entry dd ? tmp_page_tabs dd ? use16 ap_init16: cli lgdt [cs:gdts_ap - ap_init16] mov eax, [cs:cr3_ap - ap_init16] mov cr3, eax mov eax, [cs:cr4_ap - ap_init16] mov cr4, eax mov eax, CR0_PE + CR0_PG + CR0_WP mov cr0, eax jmp pword os_code:ap_init_high align 16 gdts_ap: dw gdte-gdts-1 dd gdts dw 0 cr3_ap dd ? cr4_ap dd ? ap_init16_size = $ - ap_init16 use32 __DEBUG__ fix 1 __DEBUG_LEVEL__ fix 1 include 'init.inc' org OS_BASE+$ include 'fdo.inc' align 4 high_code: mov ax, os_stack mov bx, app_data mov cx, app_tls mov ss, ax add esp, OS_BASE mov ds, bx mov es, bx mov fs, cx mov gs, bx xor eax, eax mov ebx, 0xFFFFF000 + PG_SHARED + PG_NOCACHE + PG_UWR bt [cpu_caps], CAPS_PAT setc al shl eax, 7 or ebx, eax mov eax, PG_GLOBAL bt [cpu_caps], CAPS_PGE jnc @F or [sys_proc + PROC.pdt_0 + (OS_BASE shr 20)], eax or ebx, eax mov eax, cr4 or eax, CR4_PGE mov cr4, eax @@: mov [pte_valid_mask], ebx xor eax, eax mov dword [sys_proc + PROC.pdt_0], eax mov dword [sys_proc + PROC.pdt_0+4], eax mov eax, cr3 mov cr3, eax ; flush TLB mov ecx, pg_data.mutex call mutex_init mov ecx, disk_list_mutex call mutex_init mov ecx, keyboard_list_mutex call mutex_init mov ecx, unpack_mutex call mutex_init mov ecx, application_table_mutex call mutex_init mov ecx, ide_mutex call mutex_init mov ecx, ide_channel1_mutex call mutex_init mov ecx, ide_channel2_mutex call mutex_init mov ecx, ide_channel3_mutex call mutex_init mov ecx, ide_channel4_mutex call mutex_init mov ecx, ide_channel5_mutex call mutex_init mov ecx, ide_channel6_mutex call mutex_init ;----------------------------------------------------------------------------- ; SAVE REAL MODE VARIABLES ;----------------------------------------------------------------------------- ; --------------- APM --------------------- ; init selectors mov ebx, [BOOT.apm_entry] ; offset of APM entry point movzx eax, word [BOOT.apm_code_32] ; real-mode segment base address of ; protected-mode 32-bit code segment movzx ecx, word [BOOT.apm_code_16] ; real-mode segment base address of ; protected-mode 16-bit code segment movzx edx, word [BOOT.apm_data_16] ; real-mode segment base address of ; protected-mode 16-bit data segment shl eax, 4 mov [dword apm_code_32 + 2], ax shr eax, 16 mov [dword apm_code_32 + 4], al shl ecx, 4 mov [dword apm_code_16 + 2], cx shr ecx, 16 mov [dword apm_code_16 + 4], cl shl edx, 4 mov [dword apm_data_16 + 2], dx shr edx, 16 mov [dword apm_data_16 + 4], dl mov dword[apm_entry], ebx mov word [apm_entry + 4], apm_code_32 - gdts mov eax, dword[BOOT.apm_version] ; version & flags mov [apm_vf], eax ; ----------------------------------------- mov al, [BOOT.dma] ; DMA access mov [allow_dma_access], al mov al, [BOOT.debug_print] ; If nonzero, duplicates debug output to the screen mov [debug_direct_print], al mov al, [BOOT.launcher_start] ; Start the first app (LAUNCHER) after kernel is loaded? mov [launcher_start], al mov eax, [BOOT.devicesdat_size] mov [acpi_dev_size], eax mov eax, [BOOT.devicesdat_data] mov [acpi_dev_data], eax mov esi, BOOT.bios_hd movzx ecx, byte [esi-1] mov [NumBiosDisks], ecx mov edi, BiosDisksData shl ecx, 2 rep movsd ; -------- Fast System Call init ---------- ; Intel SYSENTER/SYSEXIT (AMD CPU support it too) bt [cpu_caps], CAPS_SEP jnc .SEnP ; SysEnter not Present xor edx, edx mov ecx, MSR_SYSENTER_CS mov eax, os_code wrmsr mov ecx, MSR_SYSENTER_ESP ; mov eax, sysenter_stack ; Check it xor eax, eax wrmsr mov ecx, MSR_SYSENTER_EIP mov eax, sysenter_entry wrmsr .SEnP: ; AMD SYSCALL/SYSRET cmp byte[cpu_vendor], 'A' jne .noSYSCALL mov eax, 0x80000001 cpuid test edx, 0x800 ; bit_11 - SYSCALL/SYSRET support jz .noSYSCALL mov ecx, MSR_AMD_EFER rdmsr or eax, 1 ; bit_0 - System Call Extension (SCE) wrmsr ; !!!! It`s dirty hack, fix it !!! ; Bits of EDX : ; Bit 31–16 During the SYSRET instruction, this field is copied into the CS register ; and the contents of this field, plus 8, are copied into the SS register. ; Bit 15–0 During the SYSCALL instruction, this field is copied into the CS register ; and the contents of this field, plus 8, are copied into the SS register. ; mov edx, (os_code + 16) * 65536 + os_code mov edx, 0x1B0008 mov eax, syscall_entry mov ecx, MSR_AMD_STAR wrmsr .noSYSCALL: ; ----------------------------------------- stdcall alloc_page stdcall map_page, tss-0xF80, eax, PG_SWR stdcall alloc_page stdcall map_page, tss+0x80, eax, PG_SWR stdcall alloc_page stdcall map_page, tss+0x1080, eax, PG_SWR ; LOAD IDT call build_interrupt_table ;lidt is executed ;lidt [idtreg] call init_kernel_heap call init_fpu mov eax, [xsave_area_size] lea eax, [eax*2 + RING0_STACK_SIZE*2] stdcall kernel_alloc, eax mov [os_stack_seg], eax lea esp, [eax + RING0_STACK_SIZE] mov [tss._ss0], os_stack mov [tss._esp0], esp mov [tss._esp], esp mov [tss._cs], os_code mov [tss._ss], os_stack mov [tss._ds], app_data mov [tss._es], app_data mov [tss._fs], app_data mov [tss._gs], app_data mov [tss._io], 128 ;Add IO access table - bit array of permitted ports mov edi, tss._io_map_0 xor eax, eax not eax mov ecx, 8192/4 rep stosd ; access to 4096*8=65536 ports mov ax, tss0 ltr ax mov eax, sys_proc list_init eax add eax, PROC.thr_list list_init eax call init_video call init_pat_mtrr mov [LFBAddress], LFB_BASE mov ecx, bios_fb call set_framebuffer call init_malloc stdcall alloc_kernel_space, 0x50000 ; FIXME check size mov [default_io_map], eax add eax, 0x2000 mov [ipc_tmp], eax mov ebx, 0x1000 add eax, 0x40000 mov [proc_mem_map], eax add eax, 0x8000 mov [proc_mem_pdir], eax add eax, ebx mov [proc_mem_tab], eax add eax, ebx mov [tmp_task_ptab], eax add eax, ebx mov [ipc_pdir], eax add eax, ebx mov [ipc_ptab], eax stdcall kernel_alloc, (unpack.LZMA_BASE_SIZE + (unpack.LZMA_LIT_SIZE shl \ (unpack.lc + unpack.lp)))*4 mov [unpack.p], eax call init_events mov eax, srv.fd - SRV.fd mov [srv.fd], eax mov [srv.bk], eax ;Set base of graphic segment to linear address of LFB mov eax, [LFBAddress] ; set for gs mov [graph_data_l+2], ax shr eax, 16 mov [graph_data_l+4], al mov [graph_data_l+7], ah stdcall kernel_alloc, [_display.win_map_size] mov [_display.win_map], eax xor eax, eax inc eax ; set background mov [BgrDrawMode], eax mov [BgrDataWidth], eax mov [BgrDataHeight], eax mov [mem_BACKGROUND], 4 mov [img_background], static_background_data ; set clipboard xor eax, eax mov [clipboard_slots], eax mov [clipboard_write_lock], eax stdcall kernel_alloc, PAGE_SIZE test eax, eax jnz @f dec eax @@: mov [clipboard_main_list], eax call check_acpi mov eax, [hpet_base] test eax, eax jz @F stdcall map_io_mem, [hpet_base], 1024, PG_GLOBAL + PAT_UC + PG_SWR mov [hpet_base], eax mov eax, [eax+HPET_ID] DEBUGF 1, "K : HPET caps %x\n", eax call init_hpet @@: ; SET UP OS TASK mov esi, boot_setostask call boot_log mov edi, sys_proc + PROC.heap_lock mov ecx, (PROC.ht_free - PROC.heap_lock)/4 xor eax, eax cld rep stosd mov [edi], dword (PROC.pdt_0 - PROC.htab)/4 - 3 mov [edi+4], dword 3 ;reserve handles for stdin stdout and stderr mov ecx, (PROC.pdt_0 - PROC.htab)/4 add edi, 8 inc eax @@: stosd inc eax cmp eax, ecx jbe @B mov [sys_proc + PROC.pdt_0_phys], sys_proc - OS_BASE + PROC.pdt_0 mov eax, -1 mov edi, thr_slot_map+4 mov [edi-4], dword 0xFFFFFFF8 stosd stosd stosd stosd stosd stosd stosd mov [current_process], sys_proc mov edx, SLOT_BASE + sizeof.APPDATA*1 mov ebx, [os_stack_seg] add ebx, RING0_STACK_SIZE add ebx, [xsave_area_size] call setup_os_slot mov dword [edx], 'IDLE' sub [edx + APPDATA.saved_esp], 4 mov eax, [edx + APPDATA.saved_esp] mov dword [eax], idle_thread mov ecx, IDLE_PRIORITY call scheduler_add_thread mov edx, SLOT_BASE + sizeof.APPDATA*2 mov ebx, [os_stack_seg] call setup_os_slot mov dword [edx], 'OS' xor ecx, ecx call scheduler_add_thread mov dword [current_slot_idx], 2 mov [thread_count], 2 mov dword [current_slot], SLOT_BASE + sizeof.APPDATA*2 ; Move other CPUs to deep sleep, if it is useful uglobal use_mwait_for_idle db 0 endg cmp [cpu_vendor+8], 'ntel' jnz .no_wake_cpus bt [cpu_caps+4], CAPS_MONITOR-32 jnc .no_wake_cpus dbgstr 'using mwait for idle loop' inc [use_mwait_for_idle] mov ebx, [cpu_count] cmp ebx, 1 jbe .no_wake_cpus call create_trampoline_pgmap mov [cr3_ap + OS_BASE], eax mov eax, cr4 mov [cr4_ap + OS_BASE], eax mov esi, OS_BASE + ap_init16 mov edi, OS_BASE + 8000h mov ecx, (ap_init16_size + 3) / 4 rep movsd mov eax, [LAPIC_BASE] test eax, eax jnz @f stdcall map_io_mem, [acpi_lapic_base], 0x1000, PG_GLOBAL + PG_NOCACHE + PG_SWR mov [LAPIC_BASE], eax @@: lea edi, [eax + APIC_ICRL] mov esi, smpt+4 dec ebx .wake_cpus_loop: lodsd push esi xor esi, esi inc esi shl eax, 24 mov [edi+10h], eax ; assert INIT IPI mov dword [edi], 0C500h call delay_ms @@: test dword [edi], 1000h jnz @b ; deassert INIT IPI mov dword [edi], 8500h call delay_ms @@: test dword [edi], 1000h jnz @b ; send STARTUP IPI mov dword [edi], 600h + (8000h shr 12) call delay_ms @@: test dword [edi], 1000h jnz @b pop esi dec ebx jnz .wake_cpus_loop mov eax, [cpu_count] dec eax @@: cmp [ap_initialized], eax jnz @b mov eax, [cr3_ap + OS_BASE] call free_page .no_wake_cpus: ; REDIRECT ALL IRQ'S TO INT'S 0x20-0x2f mov esi, boot_initirq call boot_log call init_irqs mov esi, boot_picinit call boot_log call PIC_init mov esi, boot_v86machine call boot_log ; Initialize system V86 machine call init_sys_v86 mov esi, boot_inittimer call boot_log ; Initialize system timer (IRQ0) call PIT_init ; Register ramdisk file system if ~ defined extended_primary_loader cmp [BOOT.rd_load_from], RD_LOAD_FROM_HD ; will be loaded later je @f end if cmp [BOOT.rd_load_from], RD_LOAD_FROM_NONE je @f call register_ramdisk ;-------------------------------------- @@: mov esi, boot_initapic call boot_log ; Try to Initialize APIC call APIC_init mov esi, boot_enableirq call boot_log ; Enable timer IRQ (IRQ0) and co-processor IRQ (IRQ13) ; they are used: when partitions are scanned, hd_read relies on timer call unmask_timer ; Prevent duplicate timer IRQs in APIC mode cmp [irq_mode], IRQ_APIC jz @f stdcall enable_irq, 2 ; @#$%! PIC @@: stdcall enable_irq, 13 ; co-processor ; Setup serial output console (if enabled) if defined debug_com_base ; reserve port so nobody else will use it xor ebx, ebx mov ecx, debug_com_base mov edx, debug_com_base+7 call r_f_port_area ; enable Divisor latch mov dx, debug_com_base+3 mov al, 1 shl 7 out dx, al ; Set speed to 115200 baud (max speed) mov dx, debug_com_base mov al, 0x01 out dx, al mov dx, debug_com_base+1 mov al, 0x00 out dx, al ; No parity, 8bits words, one stop bit, dlab bit back to 0 mov dx, debug_com_base+3 mov al, 3 out dx, al ; disable interrupts mov dx, debug_com_base+1 mov al, 0 out dx, al ; clear + enable fifo (64 bits) mov dx, debug_com_base+2 mov al, 0x7 + 1 shl 5 out dx, al end if ;----------------------------------------------------------------------------- ; show SVN version of kernel on the message board ;----------------------------------------------------------------------------- mov eax, [version_inf.rev] DEBUGF 1, "K : kernel SVN r%d\n", eax ;----------------------------------------------------------------------------- ; show CPU count on the message board ;----------------------------------------------------------------------------- mov eax, [cpu_count] test eax, eax jnz @F mov al, 1 ; at least one CPU @@: DEBUGF 1, "K : %d CPU detected\n", eax ;----------------------------------------------------------------------------- ; detect Floppy drives ;----------------------------------------------------------------------------- mov esi, boot_detectfloppy call boot_log include 'detect/dev_fd.inc' ;----------------------------------------------------------------------------- ; create pci-devices list ;----------------------------------------------------------------------------- mov [pci_access_enabled], 1 call pci_enum ;----------------------------------------------------------------------------- ; initialisation IDE ATA code ;----------------------------------------------------------------------------- include 'detect/init_ata.inc' ;----------------------------------------------------------------------------- ; initialisation AHCI code ;----------------------------------------------------------------------------- jmp ahci_code_end include 'blkdev/ahci.inc' ahci_code_end: call ahci_init ;----------------------------------------------------------------------------- if 0 mov ax, [BOOT.sys_disk] cmp ax, 'r1'; if using not ram disk, then load librares and parameters {SPraid.simba} je no_lib_load mov esi, boot_loadlibs call boot_log ; LOADING LIBRARES stdcall dll.Load, @IMPORT ; loading librares for kernel (.obj files) call load_file_parse_table ; prepare file parse table call set_kernel_conf ; configure devices and gui no_lib_load: end if ; Display APIC status mov esi, boot_APIC_found cmp [irq_mode], IRQ_APIC je @f mov esi, boot_APIC_nfound @@: call boot_log ; PRINT AMOUNT OF MEMORY mov esi, boot_memdetect call boot_log movzx ecx, word [boot_y] if lang eq ru or ecx, (10+30*6) shl 16 else if lang eq sp or ecx, (10+33*6) shl 16 else or ecx, (10+29*6) shl 16 end if sub ecx, 10 mov edx, 0xFFFFFF mov ebx, [MEM_AMOUNT] shr ebx, 20 xor edi, edi mov eax, 0x00040000 inc edi call display_number_force ; BUILD SCHEDULER ; call build_scheduler; sys32.inc ; mov esi, boot_devices ; call boot_log include "detect/vortex86.inc" ; Vortex86 SoC detection code stdcall load_pe_driver, szVidintel, 0 call usb_init ; SET PRELIMINARY WINDOW STACK AND POSITIONS mov esi, boot_windefs call boot_log call set_window_defaults ; SET BACKGROUND DEFAULTS mov esi, boot_bgr call boot_log call init_background call calculatebackground ; RESERVE SYSTEM IRQ'S JA PORT'S mov esi, boot_resirqports call boot_log call reserve_irqs_ports mov [SLOT_BASE + APPDATA.window], window_data mov [SLOT_BASE + sizeof.APPDATA + APPDATA.window], window_data + sizeof.WDATA mov [SLOT_BASE + sizeof.APPDATA*2 + APPDATA.window], window_data + sizeof.WDATA*2 mov [window_data + WDATA.thread], SLOT_BASE mov [window_data + sizeof.WDATA + WDATA.thread], SLOT_BASE + sizeof.APPDATA mov [window_data + sizeof.WDATA*2 + WDATA.thread], SLOT_BASE + sizeof.APPDATA*2 call init_display mov eax, [def_cursor] mov [window_data + sizeof.WDATA + WDATA.cursor], eax mov [window_data + sizeof.WDATA*2 + WDATA.cursor], eax ; PRINT CPU FREQUENCY mov esi, boot_cpufreq call boot_log cli mov ebx, [hpet_base] test ebx, ebx jz @F mov ebx, [ebx + HPET_COUNTER] rdtsc mov ecx, 1000 sub eax, [hpet_tsc_start] sbb edx, [hpet_tsc_start + 4] shld edx, eax, 10 shl eax, 10 mov esi, eax mov eax, edx mul ecx xchg eax, esi mul ecx adc edx, esi div ebx mul ecx div [hpet_period] mul ecx DEBUGF 1, "K : cpu frequency %u Hz\n", eax jmp .next @@: rdtsc mov ecx, eax mov esi, 250 ; wait 1/4 a second call delay_ms rdtsc sub eax, ecx xor edx, edx shld edx, eax, 2 shl eax, 2 .next: mov dword [cpu_freq], eax mov dword [cpu_freq + 4], edx mov ebx, 1000000 div ebx mov ebx, eax movzx ecx, word [boot_y] if lang eq ru add ecx, (10+19*6) shl 16 - 10 else if lang eq sp add ecx, (10+25*6) shl 16 - 10 else add ecx, (10+17*6) shl 16 - 10 end if mov edx, 0xFFFFFF xor edi, edi mov eax, 0x00040000 inc edi call display_number_force ; SET VARIABLES call set_variables ; STACK AND FDC call stack_init call fdc_init ; PALETTE FOR 320x200 and 640x480 16 col cmp [SCR_MODE], word 0x12 jne no_pal_vga mov esi, boot_pal_vga call boot_log call paletteVGA no_pal_vga: cmp [SCR_MODE], word 0x13 jne no_pal_ega mov esi, boot_pal_ega call boot_log call palette320x200 no_pal_ega: ; LOAD DEFAULT SKIN call load_default_skin ; Protect I/O permission map mov esi, [default_io_map] stdcall map_page, esi, [SLOT_BASE + sizeof.APPDATA + APPDATA.io_map], PG_READ add esi, 0x1000 stdcall map_page, esi, [SLOT_BASE + sizeof.APPDATA + APPDATA.io_map + 4], PG_READ stdcall map_page, tss._io_map_0, \ [SLOT_BASE + sizeof.APPDATA + APPDATA.io_map], PG_READ stdcall map_page, tss._io_map_1, \ [SLOT_BASE + sizeof.APPDATA + APPDATA.io_map + 4], PG_READ ; SET KEYBOARD PARAMETERS mov al, 0xf6 ; reset keyboard, scan enabled call kb_write_wait_ack test ah, ah jnz .no_keyboard iglobal align 4 ps2_keyboard_functions: dd .end - $ dd 0 ; no close dd ps2_set_lights .end: endg stdcall register_keyboard, ps2_keyboard_functions, 0 ; mov al, 0xED ; Keyboard LEDs - only for testing! ; call kb_write_wait_ack ; mov al, 111b ; call kb_write_wait_ack mov al, 0xF3 ; set repeat rate & delay call kb_write_wait_ack mov al, 0; 30 250 ;00100010b ; 24 500 ;00100100b ; 20 500 call kb_write_wait_ack ;// mike.dld [ call set_lights ;// mike.dld ] stdcall attach_int_handler, 1, irq1, 0 DEBUGF 1, "K : IRQ1 return code %x\n", eax .no_keyboard: ; Load PS/2 mouse driver mov esi, boot_setmouse call boot_log stdcall load_pe_driver, szPS2MDriver, 0 ; LOAD FIRST APPLICATION cmp byte [launcher_start], 1 ; Check if starting LAUNCHER is selected on blue screen (1 = yes) jnz first_app_found cli mov ebp, firstapp call fs_execute_from_sysdir test eax, eax jns first_app_found mov esi, boot_failed call boot_log mov eax, 0xDEADBEEF ; otherwise halt hlt first_app_found: ; START MULTITASKING preboot_blogesc = 0 ; start immediately after bootlog ; A 'All set - press ESC to start' messages if need if preboot_blogesc mov esi, boot_tasking call boot_log .bll1: in al, 0x60 ; wait for ESC key press cmp al, 129 jne .bll1 end if mov [timer_ticks_enable], 1 ; for cd driver sti call mtrr_validate jmp osloop ; Fly :) uglobal align 4 ap_initialized dd 0 endg ap_init_high: mov ax, os_stack mov bx, app_data mov cx, app_tls mov ss, ax mov ds, bx mov es, bx mov fs, cx mov gs, bx xor esp, esp mov eax, sys_proc - OS_BASE + PROC.pdt_0 mov cr3, eax lock inc [ap_initialized] jmp idle_loop include 'unpacker.inc' align 4 boot_log: pushad mov ebx, 10*65536 mov bx, word [boot_y] add [boot_y], dword 10 mov ecx, 0x80ffffff; ASCIIZ string with white color xor edi, edi mov edx, esi inc edi call dtext mov [novesachecksum], 1000 call checkVga_N13 popad ret ;----------------------------------------------------------------------------- ; Register ramdisk file system register_ramdisk: mov esi, boot_initramdisk call boot_log call ramdisk_init ret ; in: edx -> APPDATA for OS/IDLE slot ; in: ebx = stack base proc setup_os_slot xor eax, eax mov ecx, sizeof.APPDATA/4 mov edi, edx rep stosd mov eax, tss+0x80 call get_pg_addr inc eax mov [edx + APPDATA.io_map], eax mov eax, tss+0x1080 call get_pg_addr inc eax mov [edx + APPDATA.io_map + 4], eax mov dword [edx + APPDATA.pl0_stack], ebx lea edi, [ebx + RING0_STACK_SIZE] mov dword [edx + APPDATA.fpu_state], edi mov dword [edx + APPDATA.saved_esp0], edi mov dword [edx + APPDATA.saved_esp], edi mov dword [edx + APPDATA.terminate_protection], 1 ; make unkillable mov esi, fpu_data mov ecx, [xsave_area_size] add ecx, 3 shr ecx, 2 rep movsd lea eax, [edx + APP_EV_OFFSET] mov dword [edx + APPDATA.fd_ev], eax mov dword [edx + APPDATA.bk_ev], eax lea eax, [edx + APP_OBJ_OFFSET] mov dword [edx + APPDATA.fd_obj], eax mov dword [edx + APPDATA.bk_obj], eax mov dword [edx + APPDATA.cur_dir], sysdir_path-2 mov [edx + APPDATA.process], sys_proc lea ebx, [edx + APPDATA.list] lea ecx, [sys_proc + PROC.thr_list] list_add_tail ebx, ecx mov [edx + APPDATA.wnd_number], dh mov byte [edx + APPDATA.tid], dh movzx eax, dh shl eax, BSF sizeof.WDATA add eax, window_data mov [edx + APPDATA.window], eax ret endp ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; ; MAIN OS LOOP START ; ; ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; align 32 osloop: mov edx, osloop_has_work? xor ecx, ecx call Wait_events xor eax, eax xchg eax, [osloop_nonperiodic_work] test eax, eax jz .no_periodic call __sys_draw_pointer call window_check_events call mouse_check_events call checkmisc call checkVga_N13 ;-------------------------------------- .no_periodic: call stack_handler call check_fdd_motor_status call check_ATAPI_device_event call check_lights_state call check_timers jmp osloop ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; ; MAIN OS LOOP END ; ; ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; proc osloop_has_work? cmp [osloop_nonperiodic_work], 0 jnz .yes call stack_handler_has_work? jnz .yes call check_fdd_motor_status_has_work? jnz .yes call check_ATAPI_device_event_has_work? jnz .yes call check_lights_state_has_work? jnz .yes call check_timers_has_work? jnz .yes .no: xor eax, eax ret .yes: xor eax, eax inc eax ret endp proc wakeup_osloop mov [osloop_nonperiodic_work], 1 ret endp uglobal align 4 osloop_nonperiodic_work dd ? endg uglobal align 64 idle_addr rb 64 endg idle_thread: sti ; The following code can be executed by all CPUs in the system. ; All other parts of the kernel do not expect multi-CPU. ; Also, APs don't even have a stack here. ; Beware. Don't do anything here. Anything at all. idle_loop: cmp [use_mwait_for_idle], 0 jnz .mwait .hlt: hlt jmp .hlt .mwait: mov eax, idle_addr xor ecx, ecx xor edx, edx monitor xor ecx, ecx mov eax, 20h ; or 10h mwait jmp .mwait ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; ; INCLUDED SYSTEM FILES ; ; ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; include "kernel32.inc" ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; ; KERNEL FUNCTIONS ; ; ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; reserve_irqs_ports: ; RESERVE PORTS mov eax, RESERVED_PORTS mov ecx, 1 mov [eax], dword 4 mov [eax+16], ecx mov [eax+16+4], dword 0 mov [eax+16+8], dword 0x2D mov [eax+32], ecx mov [eax+32+4], dword 0x30 mov [eax+32+8], dword 0x4D mov [eax+48], ecx mov [eax+48+4], dword 0x50 mov [eax+48+8], dword 0xDF mov [eax+64], ecx mov [eax+64+4], dword 0xE5 mov [eax+64+8], dword 0xFF ret iglobal process_number dd 0x2 endg set_variables: mov ecx, 0x16 ; flush port 0x60 @@: in al, 0x60 loop @b push eax mov ax, [BOOT.y_res] shr ax, 1 shl eax, 16 mov ax, [BOOT.x_res] shr ax, 1 mov [MOUSE_X], eax call wakeup_osloop xor eax, eax mov [BTN_ADDR], dword BUTTON_INFO ; address of button list mov byte [KEY_COUNT], al ; keyboard buffer mov byte [BTN_COUNT], al ; button buffer pop eax ret ;----------------------------------------------------------------------------- align 4 display_number: ; add check pointers test bl, bl jz @f bt ebx, 30 ; check 30 bit jb @f stdcall is_region_userspace, ecx, 4 jz @f ret @@: jz @f stdcall is_region_userspace, ecx, 8 jz @f ret @@: test esi, 0x08000000 jz @f stdcall is_region_userspace, edi, 1 jz @f ret @@: ;It is not optimization mov eax, ebx mov ebx, ecx mov ecx, edx mov edx, esi mov esi, edi ; eax = print type, al=0 -> ebx is number ; al=1 -> ebx is pointer ; ah=0 -> display decimal ; ah=1 -> display hexadecimal ; ah=2 -> display binary ; eax bits 16-21 = number of digits to display (0-32) ; eax bits 22-31 = reserved ; ; ebx = number or pointer ; ecx = x shl 16 + y ; edx = color xor edi, edi display_number_force: push eax and eax, 0x3fffffff cmp eax, 0xffff ; length > 0 ? pop eax jge .cont_displ ret .cont_displ: push eax and eax, 0x3fffffff cmp eax, 61*0x10000 ; length <= 60 ? pop eax jb .cont_displ2 ret .cont_displ2: pushad cmp al, 1 ; ecx is a pointer ? jne @f mov ebp, ebx add ebp, 4 mov ebp, [ebp] ;[ebp + std_application_base_address] mov ebx, [ebx] ;[ebx + std_application_base_address] @@: sub esp, 64 test ah, ah ; DECIMAL jnz .no_display_desnum shr eax, 16 and eax, 0xC03f ; and eax,0x3f push eax and eax, 0x3f mov edi, esp add edi, 4+64-1 mov ecx, eax mov eax, ebx mov ebx, 10 @@: xor edx, edx call division_64_bits div ebx add dl, 48 mov [edi], dl dec edi loop @b pop eax call normalize_number call draw_num_text add esp, 64 popad ret .no_display_desnum: cmp ah, 0x01 ; HEXADECIMAL jne .no_display_hexnum shr eax, 16 and eax, 0xC03f ; and eax,0x3f push eax and eax, 0x3f mov edi, esp add edi, 4+64-1 mov ecx, eax mov eax, ebx mov ebx, 16 @@: xor edx, edx call division_64_bits div ebx ;hexletters = __fdo_hexdigits add edx, __fdo_hexdigits ;hexletters mov dl, [edx] mov [edi], dl dec edi loop @b pop eax call normalize_number call draw_num_text add esp, 64 popad ret .no_display_hexnum: cmp ah, 0x02 ; BINARY jne .no_display_binnum shr eax, 16 and eax, 0xC03f ; and eax,0x3f push eax and eax, 0x3f mov edi, esp add edi, 4+64-1 mov ecx, eax mov eax, ebx mov ebx, 2 @@: xor edx, edx call division_64_bits div ebx add dl, 48 mov [edi], dl dec edi loop @b pop eax call normalize_number call draw_num_text add esp, 64 popad ret .no_display_binnum: add esp, 64 popad ret normalize_number: test ah, 0x80 jz .continue mov ecx, 48 and eax, 0x3f @@: inc edi cmp [edi], cl jne .continue dec eax cmp eax, 1 ja @r mov al, 1 .continue: and eax, 0x3f ret division_64_bits: test [esp+1+4], byte 0x40 jz .continue push eax mov eax, ebp div ebx mov ebp, eax pop eax .continue: ret draw_num_text: mov esi, eax mov edx, 64+4 sub edx, eax add edx, esp mov ebx, [esp+64+32-8+4] ; add window start x & y mov ecx, [current_slot] mov ecx, [ecx + APPDATA.window] mov eax, [ecx + WDATA.box.left] add eax, [ecx + WDATA.clientbox.left] shl eax, 16 add eax, [ecx + WDATA.box.top] add eax, [ecx + WDATA.clientbox.top] add ebx, eax mov ecx, [esp+64+32-12+4] mov eax, [esp+64+8] ; background color (if given) mov edi, [esp+64+4] and ecx, 5FFFFFFFh bt ecx, 27 jnc @f mov edi, eax @@: jmp dtext ;----------------------------------------------------------------------------- align 4 sys_setup: ; 1 = roland mpu midi base , base io address ; 2 = keyboard 1, base kaybap 2, shift keymap, 9 country 1eng 2fi 3ger 4rus ; 3 = not used ; 4 = not used ; 5 = system language, 1eng 2fi 3ger 4rus ; 6 = not used ; 7 = not used ; 8 = not used ; 9 = not used ; 10 = not used ; 11 = enable lba read ; 12 = enable pci access ;----------------------------------------------------------------------------- and [esp + SYSCALL_STACK.eax], dword 0 ; F.21.1 - set MPU MIDI base port dec ebx jnz @f cmp ecx, 0x100 jb @f mov esi, 65535 cmp esi, ecx jb @f mov [midi_base], cx mov word [mididp], cx inc cx mov word [midisp], cx ret ;-------------------------------------- @@: ; F.21.2 - set keyboard layout dec ebx jnz @f mov eax, edx ; 1 = normal layout dec ecx jnz .shift mov ebx, keymap mov ecx, 128 call memmove ret ;-------------------------------------- .shift: ; 2 = layout at pressed Shift dec ecx jnz .alt mov ebx, keymap_shift mov ecx, 128 call memmove ret ;-------------------------------------- .alt: ; 3 = layout at pressed Alt dec ecx jnz .country mov ebx, keymap_alt mov ecx, 128 call memmove ret ;-------------------------------------- .country: ; country identifier sub ecx, 6 jnz .error mov word [keyboard], dx ret ;-------------------------------------- @@: ; F.21.5 - set system language sub ebx, 3 jnz @f mov [syslang], ecx ret ;-------------------------------------- @@: ; F.21.11 - enable/disable low-level access to HD and ecx, 1 sub ebx, 6 jnz @f mov [lba_read_enabled], ecx ret ;-------------------------------------- @@: ; F.21.12 - enable/disable low-level access to PCI dec ebx jnz .error mov [pci_access_enabled], ecx ret ;-------------------------------------- .error: or [esp + SYSCALL_STACK.eax], dword -1 ret ;----------------------------------------------------------------------------- align 4 sys_getsetup: ; 1 = roland mpu midi base , base io address ; 2 = keyboard 1, base kaybap 2, shift keymap, 9 country 1eng 2fi 3ger 4rus ; 3 = not used ; 4 = not used ; 5 = system language, 1eng 2fi 3ger 4rus ; 6 = not used ; 7 = not used ; 8 = not used ; 9 = get hs timer tic ; 10 = not used ; 11 = get the state "lba read" ; 12 = get the state "pci access" ;----------------------------------------------------------------------------- ; F.26.1 - get MPU MIDI base port dec ebx jnz @f movzx eax, [midi_base] mov [esp + SYSCALL_STACK.eax], eax ret ;-------------------------------------- @@: ; F.26.2 - get keyboard layout dec ebx jnz @f mov ebx, edx ; if given memory address belongs to kernel then error stdcall is_region_userspace, ebx, 128 jnz .addr_error ; 1 = normal layout dec ecx jnz .shift mov eax, keymap mov ecx, 128 call memmove ret ;-------------------------------------- .shift: ; 2 = layout with pressed Shift dec ecx jnz .alt mov eax, keymap_shift mov ecx, 128 call memmove ret ;-------------------------------------- .alt: ; 3 = layout with pressed Alt dec ecx jne .country mov eax, keymap_alt mov ecx, 128 call memmove ret ;-------------------------------------- .country: ; 9 = country identifier sub ecx, 6 jnz .error movzx eax, word [keyboard] mov [esp + SYSCALL_STACK.eax], eax ret .addr_error: ; if given memory address is illegal or dword [esp + SYSCALL_STACK.eax], -1 ret ;-------------------------------------- @@: ; F.26.5 - get system language sub ebx, 3 jnz @f mov eax, [syslang] mov [esp + SYSCALL_STACK.eax], eax ret ;-------------------------------------- @@: ; F.26.9 - get the value of the time counter sub ebx, 4 jnz @f mov eax, [timer_ticks] mov [esp + SYSCALL_STACK.eax], eax ret ;-------------------------------------- @@: ; F.26.10 - get the time from kernel launch in nanoseconds dec ebx jnz @f call get_clock_ns mov [esp + SYSCALL_STACK.edx], edx mov [esp + SYSCALL_STACK.eax], eax ret ;-------------------------------------- @@: ; F.26.11 - Find out whether low-level HD access is enabled dec ebx jnz @f mov eax, [lba_read_enabled] mov [esp + SYSCALL_STACK.eax], eax ret ;-------------------------------------- @@: ; F.26.12 - Find out whether low-level PCI access is enabled dec ebx jnz .error mov eax, [pci_access_enabled] mov [esp + SYSCALL_STACK.eax], eax ret ;-------------------------------------- .error: or [esp + SYSCALL_STACK.eax], dword -1 ret ;----------------------------------------------------------------------------- get_timer_ticks: mov eax, [timer_ticks] ret ;----------------------------------------------------------------------------- iglobal midi_base dw 0 endg align 4 sys_midi: cmp word [mididp], 0 jnz @f mov [esp + SYSCALL_STACK.eax], 1 ret @@: and [esp + SYSCALL_STACK.eax], 0 dec ebx jnz .smn1 ; call setuart @@: call .is_output test al, al jnz @b mov dx, word [midisp] mov al, 0xff out dx, al @@: mov dx, word [midisp] mov al, 0xff out dx, al call .is_input test al, al jnz @b call .get_mpu_in cmp al, 0xfe jnz @b @@: call .is_output test al, al jnz @b mov dx, word [midisp] mov al, 0x3f out dx, al ret .smn1: dec ebx jnz .ret @@: call .get_mpu_in call .is_output test al, al jnz @b mov al, bl call .put_mpu_out .ret: ret .is_input: push edx mov dx, word [midisp] in al, dx and al, 0x80 pop edx ret .is_output: push edx mov dx, word [midisp] in al, dx and al, 0x40 pop edx ret .get_mpu_in: push edx mov dx, word [mididp] in al, dx pop edx ret .put_mpu_out: push edx mov dx, word [mididp] out dx, al pop edx ret ;----------------------------------------------------------------------------- sys_end: ; restore default cursor before killing pusha mov ecx, [current_slot] mov ecx, [ecx + APPDATA.window] call restore_default_cursor_before_killing popa ;-------------------------------------- ; kill all sockets this process owns pusha mov edx, [current_slot] mov edx, [edx + APPDATA.tid] call socket_process_end popa ;-------------------------------------- mov ecx, [current_slot] mov eax, [ecx + APPDATA.tls_base] test eax, eax jz @F stdcall user_free, eax @@: mov eax, [current_slot] mov [eax + APPDATA.state], TSTATE_ZOMBIE call wakeup_osloop .waitterm: ; wait here for termination call change_task jmp .waitterm ;------------------------------------------------------------------------------ align 4 ; ecx - ptr WDATA restore_default_cursor_before_killing: pushfd cli mov eax, [def_cursor] mov [ecx + WDATA.cursor], eax movzx eax, word [MOUSE_Y] movzx ebx, word [MOUSE_X] mov eax, [d_width_calc_area + eax*4] add eax, [_display.win_map] movzx edx, byte [ebx + eax] shl edx, BSF sizeof.WDATA mov esi, [window_data + edx + WDATA.cursor] cmp esi, [current_cursor] je @f cmp [_display.select_cursor], 0 jz @f stdcall [_display.select_cursor], esi mov [current_cursor], esi @@: mov [redrawmouse_unconditional], 1 call wakeup_osloop popfd ret ;------------------------------------------------------------------------------ iglobal align 4 sys_system_table: dd sysfn_deactivate ; 1 = deactivate window dd sysfn_terminate ; 2 = terminate thread dd sysfn_activate ; 3 = activate window dd sysfn_getidletime ; 4 = get idle time dd sysfn_getcpuclock ; 5 = get cpu clock dd sysfn_saveramdisk ; 6 = save ramdisk dd sysfn_getactive ; 7 = get active window dd sysfn_sound_flag ; 8 = get/set sound_flag dd sysfn_shutdown ; 9 = shutdown with parameter dd sysfn_minimize ; 10 = minimize window dd sysfn_getdiskinfo ; 11 = get disk subsystem info dd undefined_syscall ; 12 = get last pressed key. function removed. sysfn_lastkey dd sysfn_getversion ; 13 = get kernel version dd sysfn_waitretrace ; 14 = wait retrace dd sysfn_centermouse ; 15 = center mouse cursor dd sysfn_getfreemem ; 16 = get free memory size dd sysfn_getallmem ; 17 = get total memory size dd sysfn_terminate2 ; 18 = terminate thread using PID ; instead of slot dd sysfn_mouse_acceleration; 19 = set/get mouse acceleration dd sysfn_meminfo ; 20 = get extended memory info dd sysfn_pid_to_slot ; 21 = get slot number for pid dd sysfn_min_rest_window ; 22 = minimize and restore any window dd sysfn_min_windows ; 23 = minimize all windows dd sysfn_set_screen_sizes ; 24 = set screen sizes for Vesa dd sysfn_zmodif ; 25 = get/set window z modifier ;Fantomer sysfn_num = ($ - sys_system_table)/4 endg ;------------------------------------------------------------------------------ sys_system: dec ebx cmp ebx, sysfn_num jae @f jmp dword [sys_system_table + ebx*4] @@: ret ;------------------------------------------------------------------------------ sysfn_shutdown: ; 18.9 = system shutdown cmp ecx, SYSTEM_SHUTDOWN jl .exit_for_anyone cmp ecx, SYSTEM_RESTART jg .exit_for_anyone mov [BOOT.shutdown_type], cl mov eax, [thread_count] mov [SYS_SHUTDOWN], al mov [shutdown_processes], eax call wakeup_osloop and dword [esp + SYSCALL_STACK.eax], 0 .exit_for_anyone: ret uglobal shutdown_processes: dd 0x0 endg ;------------------------------------------------------------------------------ ; in: eax -- APPDATA ptr ; out: Z/z -- is/not kernel thread is_kernel_thread: mov eax, [eax + APPDATA.process] cmp eax, [SLOT_BASE + 2*sizeof.APPDATA + APPDATA.process] ; OS ret ;------------------------------------------------------------------------------ sysfn_terminate: ; 18.2 = TERMINATE push ecx cmp ecx, 2 jb .noprocessterminate mov edx, [thread_count] cmp ecx, edx ja .noprocessterminate mov eax, [thread_count] shl ecx, BSF sizeof.APPDATA add ecx, SLOT_BASE mov edx, [ecx + APPDATA.tid] cmp byte [ecx + APPDATA.state], TSTATE_FREE jz .noprocessterminate push eax mov eax, ecx call is_kernel_thread pop eax jz .noprocessterminate push ecx edx mov edx, ecx call request_terminate pop edx ecx test eax, eax jz .noprocessterminate ;-------------------------------------- ; terminate all network sockets it used pusha mov eax, edx ;TODO: check function call socket_process_end popa ;-------------------------------------- ; restore default cursor before killing pusha mov ecx, [esp+32] shl ecx, BSF sizeof.WDATA add ecx, window_data mov eax, [def_cursor] cmp [ecx + WDATA.cursor], eax je @f call restore_default_cursor_before_killing @@: popa ;-------------------------------------- ;call MEM_Heap_Lock ;guarantee that process isn't working with heap mov [ecx + APPDATA.state], TSTATE_ZOMBIE; clear possible i40's call wakeup_osloop ;call MEM_Heap_UnLock cmp edx, [application_table_owner]; clear app table stat jne .noatsc call unlock_application_table .noatsc: .noprocessterminate: add esp, 4 ret ;------------------------------------------------------------------------------ sysfn_terminate2: call lock_application_table mov eax, ecx call pid_to_slot test eax, eax jz .not_found mov ecx, eax cli call sysfn_terminate call unlock_application_table sti and dword [esp + SYSCALL_STACK.eax], 0 ret .not_found: call unlock_application_table or dword [esp + SYSCALL_STACK.eax], -1 ret ;------------------------------------------------------------------------------ sysfn_deactivate: ; 18.1 = DEACTIVATE WINDOW cmp ecx, 2 jb .nowindowdeactivate cmp ecx, [thread_count] ja .nowindowdeactivate movzx esi, word [WIN_STACK + ecx*2] cmp esi, 1 je .nowindowdeactivate ; already deactive mov edi, ecx shl edi, BSF sizeof.WDATA add edi, window_data movzx esi, word [WIN_STACK + ecx * 2] lea esi, [WIN_POS + esi * 2] call window._.window_deactivate call syscall_display_settings.calculateScreen call syscall_display_settings.redrawScreen .nowindowdeactivate: ret ;------------------------------------------------------------------------------ sysfn_activate: ; 18.3 = ACTIVATE WINDOW cmp ecx, 2 jb .nowindowactivate cmp ecx, [thread_count] ja .nowindowactivate ;------------------------------------- @@: ; If the window is captured and moved by the user, ; then you can't change the position in window stack!!! mov al, [mouse.active_sys_window.action] and al, WINDOW_MOVE_AND_RESIZE_FLAGS test al, al jz @f call change_task jmp @b @@: ;------------------------------------- mov [window_minimize], 2; restore window if minimized call wakeup_osloop movzx esi, word [WIN_STACK + ecx*2] cmp esi, [thread_count] je .nowindowactivate; already active mov edi, ecx shl edi, BSF sizeof.WDATA add edi, window_data movzx esi, word [WIN_STACK + ecx * 2] lea esi, [WIN_POS + esi * 2] call waredraw .nowindowactivate: ret ;------------------------------------------------------------------------------ align 4 sysfn_zmodif: ;18,25,1 - get z_modif ;18,25,2 - set z_modif ;edx = -1(for current task) or TID ;esi(for 2) = new value z_modif ;return: ;1: eax = z_modif ;2: eax=0(fail),1(success) for set z_modif cmp edx, -1 jne @f mov edx, [current_slot_idx] @@: cmp edx, [thread_count] ja .fail cmp edx, 1 je .fail mov eax, edx shl edx, BSF sizeof.WDATA add edx, window_data test [edx + WDATA.fl_wstate], WSTATE_USED jz .fail cmp ecx, 1 jnz .set_zmod movzx eax, [edx + WDATA.z_modif] jmp .exit .set_zmod: cmp ecx, 2 jnz .fail mov ebx, esi mov esi, eax cmp bl, ZPOS_ALWAYS_TOP jg .fail mov [edx + WDATA.z_modif], bl mov eax, [edx + WDATA.box.left] mov ebx, [edx + WDATA.box.top] mov ecx, [edx + WDATA.box.width] mov edx, [edx + WDATA.box.height] add ecx, eax add edx, ebx call window._.set_screen call window._.set_top_wnd call window._.redraw_top_wnd shl esi, BSF sizeof.WDATA mov [esi + window_data + WDATA.fl_redraw], WSTATE_REDRAW mov eax, 1 jmp .exit .fail: xor eax, eax .exit: mov [esp + SYSCALL_STACK.eax], eax ret ;------------------------------------------------------------------------------ sysfn_getidletime: ; 18.4 = GET IDLETIME mov eax, [SLOT_BASE + sizeof.APPDATA + APPDATA.cpu_usage] mov [esp + SYSCALL_STACK.eax], eax ret ;------------------------------------------------------------------------------ sysfn_getcpuclock: ; 18.5 = GET TSC/SEC mov eax, dword [cpu_freq] mov [esp + SYSCALL_STACK.eax], eax ret ;------------------------------------------------------------------------------ get_cpu_freq: mov eax, dword [cpu_freq] mov edx, dword [cpu_freq+4] ret ; SAVE ramdisk to /hd/1/kolibri.img ;!!!!!!!!!!!!!!!!!!!!!!!! include 'blkdev/rdsave.inc' ;!!!!!!!!!!!!!!!!!!!!!!!! ;------------------------------------------------------------------------------ align 4 sysfn_getactive: ; 18.7 = get active window mov eax, [thread_count] movzx eax, word [WIN_POS + eax*2] mov [esp + SYSCALL_STACK.eax], eax ret ;------------------------------------------------------------------------------ sysfn_sound_flag: ; 18.8 = get/set sound_flag ; cmp ecx,1 dec ecx jnz .set_flag movzx eax, byte [sound_flag]; get sound_flag mov [esp + SYSCALL_STACK.eax], eax ret .set_flag: ; cmp ecx,2 dec ecx jnz .err xor byte [sound_flag], 1 .err: ret ;------------------------------------------------------------------------------ sysfn_minimize: ; 18.10 = minimize window mov [window_minimize], 1 call wakeup_osloop ret ;------------------------------------------------------------------------------ align 4 sysfn_getdiskinfo: ; 18.11 = get disk info table dec ecx jnz .exit .small_table: stdcall is_region_userspace, edx, DRIVE_DATA_SIZE jnz .exit mov edi, edx mov esi, DRIVE_DATA mov ecx, DRIVE_DATA_SIZE ;10 cld rep movsb .exit: ret ;------------------------------------------------------------------------------ sysfn_getversion: ; 18.13 = get kernel ID and version ; if given memory address belongs to kernel then error stdcall is_region_userspace, ecx, version_inf.size jnz .addr_error mov edi, ecx mov esi, version_inf mov ecx, version_inf.size rep movsb ret .addr_error: ; if given memory address is illegal mov dword [esp + SYSCALL_STACK.eax], -1 ret ;------------------------------------------------------------------------------ sysfn_waitretrace: ; 18.14 = sys wait retrace ;wait retrace functions mov edx, 0x3da .loop: in al, dx test al, 1000b jz .loop and [esp + SYSCALL_STACK.eax], dword 0 ret ;------------------------------------------------------------------------------ align 4 sysfn_centermouse: ; 18.15 = mouse centered mov eax, [_display.width] shr eax, 1 mov [MOUSE_X], ax mov eax, [_display.height] shr eax, 1 mov [MOUSE_Y], ax call wakeup_osloop xor eax, eax and [esp + SYSCALL_STACK.eax], eax ret ;------------------------------------------------------------------------------ sysfn_mouse_acceleration: ; 18.19 = set/get mouse features cmp ecx, 8 jnc @f jmp dword [.table + ecx*4] .get_mouse_acceleration: xor eax, eax mov ax, [mouse_speed_factor] mov [esp + SYSCALL_STACK.eax], eax ret .set_mouse_acceleration: mov [mouse_speed_factor], dx ret .get_mouse_delay: xor eax, eax mov al, [mouse_delay] mov [esp + SYSCALL_STACK.eax], eax ret .set_mouse_delay: mov [mouse_delay], dl @@: ret .set_pointer_position: cmp dx, word[_display.height] jae @b rol edx, 16 cmp dx, word[_display.width] jae @b mov [MOUSE_X], edx mov [mouse_active], 1 jmp wakeup_osloop .set_mouse_button: mov [BTN_DOWN], edx mov [mouse_active], 1 jmp wakeup_osloop .get_doubleclick_delay: xor eax, eax mov al, [mouse_doubleclick_delay] mov [esp + SYSCALL_STACK.eax], eax ret .set_doubleclick_delay: mov [mouse_doubleclick_delay], dl ret align 4 .table: dd .get_mouse_acceleration dd .set_mouse_acceleration dd .get_mouse_delay dd .set_mouse_delay dd .set_pointer_position dd .set_mouse_button dd .get_doubleclick_delay dd .set_doubleclick_delay ;------------------------------------------------------------------------------ sysfn_getfreemem: mov eax, [pg_data.pages_free] shl eax, 2 mov [esp + SYSCALL_STACK.eax], eax ret ;------------------------------------------------------------------------------ sysfn_getallmem: mov eax, [MEM_AMOUNT] shr eax, 10 mov [esp + SYSCALL_STACK.eax], eax ret ;------------------------------------------------------------------------------ sysfn_pid_to_slot: mov eax, ecx call pid_to_slot mov [esp + SYSCALL_STACK.eax], eax ret ;------------------------------------------------------------------------------ sysfn_min_rest_window: pushad mov eax, edx ; ebx - operating shr ecx, 1 jnc @f call pid_to_slot @@: or eax, eax ; eax - number of slot jz .error cmp eax, max_processes ; varify maximal slot number ja .error movzx eax, word [WIN_STACK + eax*2] shr ecx, 1 jc .restore ; .minimize: call minimize_window jmp .exit .restore: call restore_minimized_window .exit: popad xor eax, eax mov [esp + SYSCALL_STACK.eax], eax ret .error: popad xor eax, eax dec eax mov [esp + SYSCALL_STACK.eax], eax ret ;------------------------------------------------------------------------------ sysfn_min_windows: call minimize_all_window mov [esp + SYSCALL_STACK.eax], eax call change_task ret ;------------------------------------------------------------------------------ sysfn_set_screen_sizes: cmp [SCR_MODE], word 0x13 jbe .exit cmp [_display.select_cursor], select_cursor jne .exit cmp ecx, [display_width_standard] ja .exit cmp edx, [display_height_standard] ja .exit pushfd cli mov eax, ecx mov ecx, [_display.lfb_pitch] mov [_display.width], eax dec eax mov [_display.height], edx dec edx ; eax - new Screen_Max_X ; edx - new Screen_Max_Y mov [do_not_touch_winmap], 1 call set_screen mov [do_not_touch_winmap], 0 popfd call change_task .exit: ret ;------------------------------------------------------------------------------ uglobal screen_workarea RECT display_width_standard dd 0 display_height_standard dd 0 do_not_touch_winmap db 0 window_minimize db 0 sound_flag db 0 endg iglobal version_inf: db 0,7,7,0 ; version 0.7.7.0 db 0 .rev dd __REV__ .size = $ - version_inf endg ;------------------------------------------------------------------------------ align 4 sys_cachetodiskette: cmp ebx, 1 jb .no_floppy_save cmp ebx, 2 ja .no_floppy_save call save_image mov [esp + SYSCALL_STACK.eax], eax ret .no_floppy_save: mov [esp + SYSCALL_STACK.eax], dword 1 ret ;------------------------------------------------------------------------------ align 4 sys_cpuusage: ; RETURN: process_information structure ; ; if given memory address belongs to kernel then error stdcall is_region_userspace, ebx, sizeof.process_information jnz .addr_error cmp ecx, -1 ; who am I ? jne .no_who_am_i mov ecx, [current_slot_idx] .no_who_am_i: cmp ecx, max_processes ja .nofillbuf test ecx, ecx ; slot 0 is empty, kernel threads start from 1 jz .nofillbuf ; +4: word: position of the window of thread in the window stack mov ax, [WIN_STACK + ecx * 2] mov [ebx+process_information.window_stack_position], ax ; +6: word: number of the thread slot, which window has in the window stack ; position ecx (has no relation to the specific thread) mov ax, [WIN_POS + ecx * 2] mov [ebx+process_information.window_stack_value], ax shl ecx, BSF sizeof.APPDATA ; +0: dword: memory usage mov eax, [SLOT_BASE + ecx + APPDATA.cpu_usage] mov [ebx+process_information.cpu_usage], eax ; +10: 11 bytes: name of the process push ecx lea eax, [SLOT_BASE + ecx + APPDATA.app_name] add ebx, process_information.process_name mov ecx, 11 call memmove pop ecx ; +22: address of the process in memory ; +26: size of used memory - 1 push edi lea edi, [ebx+12] xor eax, eax mov edx, 0x100000*16 cmp ecx, 1 shl BSF sizeof.APPDATA je .os_mem mov edx, [SLOT_BASE + ecx + APPDATA.process] mov edx, [edx + PROC.mem_used] mov eax, std_application_base_address .os_mem: stosd lea eax, [edx-1] stosd mov edx, [SLOT_BASE + ecx + APPDATA.window] ; +30: PID/TID mov eax, [SLOT_BASE + ecx + APPDATA.tid] stosd ; window position and size push esi lea esi, [edx + WDATA.box] movsd movsd movsd movsd ; Process state (+50) movzx eax, byte [SLOT_BASE + ecx + APPDATA.state] stosd ; Window client area box lea esi, [edx + WDATA.clientbox] movsd movsd movsd movsd ; Window state mov al, [edx + WDATA.fl_wstate] stosb ; Event mask (+71) mov eax, dword [SLOT_BASE + ecx + APPDATA.event_mask] stosd ; Keyboard mode (+75) mov al, byte [SLOT_BASE + ecx + APPDATA.keyboard_mode] stosb pop esi pop edi .nofillbuf: ; return number of processes mov eax, [thread_count] mov [esp + SYSCALL_STACK.eax], eax ret .addr_error: ; if given memory address is illegal mov dword [esp + SYSCALL_STACK.eax], -1 ret ; redraw status align 4 sys_redrawstat: cmp ebx, 1 jne .no_widgets_away ; buttons away mov ecx, [current_slot_idx] .sys_newba2: mov edi, [BTN_ADDR] cmp [edi], dword 0 ; empty button list ? je .end_of_buttons_away movzx ebx, word [edi] inc ebx mov eax, edi .sys_newba: dec ebx jz .end_of_buttons_away add eax, 0x10 cmp cx, [eax] jnz .sys_newba push eax ebx ecx mov ecx, ebx inc ecx shl ecx, 4 mov ebx, eax add eax, 0x10 call memmove dec dword [edi] pop ecx ebx eax jmp .sys_newba2 .end_of_buttons_away: ret .no_widgets_away: cmp ebx, 2 jnz .srl1 mov edx, [current_slot] ; return whole screen draw area for this app mov edx, [edx + APPDATA.window] mov [edx + WDATA.draw_data.left], 0 mov [edx + WDATA.draw_data.top], 0 mov eax, [_display.width] dec eax mov [edx + WDATA.draw_data.right], eax mov eax, [_display.height] dec eax mov [edx + WDATA.draw_data.bottom], eax .srl1: ret ;ok - 100% work ;nt - not tested ;--------------------------------------------------------------------------------------------- ;eax ;0 - task switch counter. Ret switch counter in eax. Block. ok. ;1 - change task. Ret nothing. Block. ok. ;2 - performance control ; ebx ; 0 - enable or disable (inversion) PCE flag on CR4 for rdmpc in user mode. ; returned new cr4 in eax. Ret cr4 in eax. Block. ok. ; 1 - is cache enabled. Ret cr0 in eax if enabled else zero in eax. Block. ok. ; 2 - enable cache. Ret 1 in eax. Ret nothing. Block. ok. ; 3 - disable cache. Ret 0 in eax. Ret nothing. Block. ok. ;eax ;3 - rdmsr. Counter in edx. (edx:eax) [esi:edi, edx] => [edx:esi, ecx]. Ret in ebx:eax. Block. ok. ;4 - wrmsr. Counter in edx. (edx:eax) [esi:edi, edx] => [edx:esi, ecx]. Ret in ebx:eax. Block. ok. ;--------------------------------------------------------------------------------------------- iglobal align 4 sheduler: dd sys_sheduler.00 dd change_task dd sys_sheduler.02 dd sys_sheduler.03 dd sys_sheduler.04 endg sys_sheduler: ;rewritten by 29.12.2009 jmp dword [sheduler + ebx*4] ;.shed_counter: .00: mov eax, [context_counter] mov [esp + SYSCALL_STACK.eax], eax ret .02: ;.perf_control: inc ebx ;before ebx=2, ebx=3 cmp ebx, ecx ;if ecx=3, ebx=3 jz cache_disable dec ebx ;ebx=2 cmp ebx, ecx ; jz cache_enable ;if ecx=2 and ebx=2 dec ebx ;ebx=1 cmp ebx, ecx jz is_cache_enabled ;if ecx=1 and ebx=1 dec ebx test ebx, ecx ;ebx=0 and ecx=0 jz modify_pce ;if ecx=0 ret .03: ;.rdmsr_instr: ;now counter in ecx ;(edx:eax) esi:edi => edx:esi mov eax, esi mov ecx, edx rdmsr mov [esp + SYSCALL_STACK.eax], eax mov [esp + SYSCALL_STACK.ebx], edx ;ret in ebx? ret .04: ;.wrmsr_instr: ;now counter in ecx ;(edx:eax) esi:edi => edx:esi ; Fast Call MSR can't be destroy ; Но MSR_AMD_EFER можно изменять, т.к. в этом регистре лиш ; включаются/выключаются расширенные возможности cmp edx, MSR_SYSENTER_CS je @f cmp edx, MSR_SYSENTER_ESP je @f cmp edx, MSR_SYSENTER_EIP je @f cmp edx, MSR_AMD_STAR je @f mov eax, esi mov ecx, edx wrmsr ; mov [esp + 32], eax ; mov [esp + 20], edx ;ret in ebx? @@: ret cache_disable: mov eax, cr0 or eax, 01100000_00000000_00000000_00000000b mov cr0, eax wbinvd ;set MESI ret cache_enable: mov eax, cr0 and eax, 10011111_11111111_11111111_11111111b mov cr0, eax ret is_cache_enabled: mov eax, cr0 and eax, 01100000_00000000_00000000_00000000b mov [esp + SYSCALL_STACK.eax], eax ret modify_pce: mov eax, cr4 ; mov ebx,0 ; or bx,100000000b ;pce ; xor eax,ebx ;invert pce bts eax, 8;pce=cr4[8] mov cr4, eax mov [esp + SYSCALL_STACK.eax], eax ret ;--------------------------------------------------------------------------------------------- iglobal cpustring db 'CPU',0 endg uglobal background_defined db 0 ; diamond, 11.04.2006 endg ;----------------------------------------------------------------------------- align 4 checkmisc: cmp [ctrl_alt_del], 1 jne .nocpustart mov ebp, cpustring call fs_execute_from_sysdir mov [ctrl_alt_del], 0 ;-------------------------------------- align 4 .nocpustart: cmp [mouse_active], 1 jne .mouse_not_active mov [mouse_active], 0 xor edi, edi mov ebx, window_data mov ecx, [thread_count] movzx eax, word [WIN_POS + ecx*2] ; active window shl eax, BSF sizeof.APPDATA push eax movzx eax, word [MOUSE_X] movzx edx, word [MOUSE_Y] ;-------------------------------------- align 4 .set_mouse_event: add edi, sizeof.APPDATA add ebx, sizeof.WDATA test [SLOT_BASE + edi + APPDATA.event_mask], EVM_MOUSE_FILTER jz .pos_filter cmp edi, [esp] ; skip if filtration active jne .skip ;-------------------------------------- align 4 .pos_filter: test [SLOT_BASE + edi + APPDATA.event_mask], EVM_CURSOR_FILTER jz .set mov esi, [ebx + WDATA.box.left] cmp eax, esi jb .skip add esi, [ebx + WDATA.box.width] cmp eax, esi ja .skip mov esi, [ebx + WDATA.box.top] cmp edx, esi jb .skip add esi, [ebx + WDATA.box.height] cmp edx, esi ja .skip ;-------------------------------------- align 4 .set: or [SLOT_BASE + edi + APPDATA.occurred_events], EVENT_MOUSE ;-------------------------------------- align 4 .skip: loop .set_mouse_event pop eax ;-------------------------------------- align 4 .mouse_not_active: cmp [REDRAW_BACKGROUND], 0 ; background update ? jz nobackgr cmp [background_defined], 0 jz nobackgr ;-------------------------------------- align 4 backgr: mov eax, [background_window + WDATA.draw_data.left] shl eax, 16 add eax, [background_window + WDATA.draw_data.right] mov [BG_Rect_X_left_right], eax ; [left]*65536 + [right] mov eax, [background_window + WDATA.draw_data.top] shl eax, 16 add eax, [background_window + WDATA.draw_data.bottom] mov [BG_Rect_Y_top_bottom], eax ; [top]*65536 + [bottom] call drawbackground ; DEBUGF 1, "K : drawbackground\n" ; DEBUGF 1, "K : backg x %x\n",[BG_Rect_X_left_right] ; DEBUGF 1, "K : backg y %x\n",[BG_Rect_Y_top_bottom] ;--------- set event 5 start ---------- push ecx edi mov edi, window_data mov ecx, [thread_count] ;-------------------------------------- align 4 set_bgr_event: add edi, sizeof.WDATA mov eax, [BG_Rect_X_left_right] mov edx, [BG_Rect_Y_top_bottom] cmp [edi + WDATA.draw_bgr_x], 0 jz .set .join: cmp word [edi + WDATA.draw_bgr_x], ax jae @f mov word [edi + WDATA.draw_bgr_x], ax @@: shr eax, 16 cmp word [edi + WDATA.draw_bgr_x + 2], ax jbe @f mov word [edi + WDATA.draw_bgr_x + 2], ax @@: cmp word [edi + WDATA.draw_bgr_y], dx jae @f mov word [edi + WDATA.draw_bgr_y], dx @@: shr edx, 16 cmp word [edi + WDATA.draw_bgr_y+2], dx jbe @f mov word [edi + WDATA.draw_bgr_y+2], dx @@: jmp .common .set: mov [edi + WDATA.draw_bgr_x], eax mov [edi + WDATA.draw_bgr_y], edx .common: mov eax, [edi + WDATA.thread] test eax, eax jz @f or [eax + APPDATA.occurred_events], EVENT_BACKGROUND @@: loop set_bgr_event pop edi ecx ;--------- set event 5 stop ----------- dec [REDRAW_BACKGROUND] ; got new update request? jnz backgr xor eax, eax mov [background_window + WDATA.draw_data.left], eax mov [background_window + WDATA.draw_data.top], eax mov [background_window + WDATA.draw_data.right], eax mov [background_window + WDATA.draw_data.bottom], eax ;-------------------------------------- align 4 nobackgr: ; system shutdown request cmp [SYS_SHUTDOWN], byte 0 je noshutdown mov edx, [shutdown_processes] cmp [SYS_SHUTDOWN], dl jne noshutdown lea ecx, [edx-1] mov edx, SLOT_BASE + sizeof.APPDATA*2 ;OS_BASE+0x3040 jecxz no_mark_system_shutdown ;-------------------------------------- align 4 markz: push ecx edx cmp [edx + APPDATA.state], TSTATE_FREE jz .nokill cmp [edx + APPDATA.process], sys_proc jz .nokill call request_terminate jmp .common .nokill: dec byte [SYS_SHUTDOWN] xor eax, eax .common: pop edx ecx test eax, eax jz @f mov [edx + APPDATA.state], TSTATE_ZOMBIE @@: add edx, sizeof.APPDATA loop markz call wakeup_osloop ;-------------------------------------- align 4 @@: no_mark_system_shutdown: dec byte [SYS_SHUTDOWN] je system_shutdown ;-------------------------------------- align 4 noshutdown: mov eax, [thread_count] ; termination mov ebx, SLOT_BASE + sizeof.APPDATA + APPDATA.state mov esi, 1 ;-------------------------------------- align 4 newct: mov cl, [ebx] cmp cl, TSTATE_ZOMBIE jz .terminate cmp cl, TSTATE_TERMINATING jnz .noterminate .terminate: pushad push esi mov ecx, dword[ebx - APPDATA.state + APPDATA.window] call restore_default_cursor_before_killing pop esi call terminate popad cmp byte [SYS_SHUTDOWN], 0 jz .noterminate dec byte [SYS_SHUTDOWN] je system_shutdown .noterminate: add ebx, sizeof.APPDATA inc esi dec eax jnz newct ret ;----------------------------------------------------------------------------- align 4 ; eax - ptr to WDATA redrawscreen: ; eax , if process window_data base is eax, do not set flag/limits pushad push eax ;;; mov ebx,2 ;;; call delay_hs ;mov ecx,0 ; redraw flags for apps xor ecx, ecx ;-------------------------------------- align 4 newdw2: inc ecx push ecx mov eax, ecx shl eax, BSF sizeof.WDATA add eax, window_data cmp eax, [esp+4] je not_this_task ; check if window in redraw area mov edi, eax cmp ecx, 1 ; limit for background jz bgli mov eax, [esp+4] ;if upper in z-position - no redraw test eax, eax jz @f mov al, [eax + WDATA.z_modif] cmp [edi + WDATA.z_modif], al jg ricino @@: mov eax, [edi + WDATA.box.left] mov ebx, [edi + WDATA.box.top] cmp ebx, [draw_limits.bottom] ; ecx = area y end ebx = window y start jae ricino cmp eax, [draw_limits.right] ; ecx = area x end eax = window x start jae ricino mov eax, [edi + WDATA.box.left] mov ebx, [edi + WDATA.box.top] mov ecx, [edi + WDATA.box.width] mov edx, [edi + WDATA.box.height] add ecx, eax add edx, ebx mov eax, [draw_limits.top] ; eax = area y start edx = window y end cmp edx, eax jb ricino mov eax, [draw_limits.left] ; eax = area x start ecx = window x end cmp ecx, eax jb ricino ;-------------------------------------- align 4 bgli: cmp dword[esp], 1 ; check index in window_data array, 1 - idle jnz .az cmp [REDRAW_BACKGROUND], 0 jz .az mov dl, 0 mov ebx, [draw_limits.left] cmp ebx, [edi + WDATA.draw_data.left] jae @f mov [edi + WDATA.draw_data.left], ebx mov dl, 1 ;-------------------------------------- align 4 @@: mov ebx, [draw_limits.top] cmp ebx, [edi + WDATA.draw_data.top] jae @f mov [edi + WDATA.draw_data.top], ebx mov dl, 1 ;-------------------------------------- align 4 @@: mov ebx, [draw_limits.right] cmp ebx, [edi + WDATA.draw_data.right] jbe @f mov [edi + WDATA.draw_data.right], ebx mov dl, 1 ;-------------------------------------- align 4 @@: mov ebx, [draw_limits.bottom] cmp ebx, [edi + WDATA.draw_data.bottom] jbe @f mov [edi + WDATA.draw_data.bottom], ebx mov dl, 1 ;-------------------------------------- align 4 @@: add [REDRAW_BACKGROUND], dl call wakeup_osloop jmp newdw8 ;-------------------------------------- align 4 .az: mov ebx, [draw_limits.left] ; set limits mov [edi + WDATA.draw_data.left], ebx mov ebx, [draw_limits.top] mov [edi + WDATA.draw_data.top], ebx mov ebx, [draw_limits.right] mov [edi + WDATA.draw_data.right], ebx mov ebx, [draw_limits.bottom] mov [edi + WDATA.draw_data.bottom], ebx cmp dword [esp], 1 ; check idle thread jne nobgrd inc [REDRAW_BACKGROUND] call wakeup_osloop ;-------------------------------------- align 4 newdw8: nobgrd: ;-------------------------------------- push edi ebp mov edi, [esp+8] cmp edi, 1 je .found mov eax, [draw_limits.left] mov ebx, [draw_limits.top] mov ecx, [draw_limits.right] sub ecx, eax test ecx, ecx jz .not_found mov edx, [draw_limits.bottom] sub edx, ebx test edx, edx jz .not_found ; eax - x, ebx - y ; ecx - size x, edx - size y add ebx, edx ;-------------------------------------- align 4 .start_y: push ecx ;-------------------------------------- align 4 .start_x: add eax, ecx mov ebp, [d_width_calc_area + ebx*4] add ebp, [_display.win_map] movzx ebp, byte[eax+ebp] ; get value for current point cmp ebp, edi jne @f pop ecx jmp .found ;-------------------------------------- align 4 @@: sub eax, ecx dec ecx jns .start_x pop ecx dec ebx dec edx jns .start_y ;-------------------------------------- align 4 .not_found: pop ebp edi jmp ricino ;-------------------------------------- align 4 .found: pop ebp edi mov [edi + WDATA.fl_redraw], WSTATE_REDRAW ; mark as redraw ;-------------------------------------- align 4 ricino: not_this_task: pop ecx cmp ecx, [thread_count] jle newdw2 pop eax popad ret ;----------------------------------------------------------------------------- align 4 calculatebackground: ; background mov edi, [_display.win_map] ; set os to use all pixels mov eax, 0x01010101 mov ecx, [_display.win_map_size] shr ecx, 2 rep stosd mov byte[background_window + WDATA.z_modif], ZPOS_DESKTOP mov [REDRAW_BACKGROUND], 0 ret ;----------------------------------------------------------------------------- uglobal imax dd 0x0 endg ;----------------------------------------------------------------------------- align 4 delay_ms: ; delay in 1/1000 sec pushad cmp [hpet_base], 0 jz .no_hpet mov eax, esi mov edx, 1_000_000 ; ms to ns mul edx mov ebx, edx mov ecx, eax push ecx call get_clock_ns pop ecx mov edi, edx mov esi, eax .wait: push ecx call get_clock_ns pop ecx sub eax, esi sbb edx, edi sub eax, ecx sbb edx, ebx jc .wait jmp .done .no_hpet: mov ecx, esi ; imul ecx, 33941 shr ecx, 9 ; in al, 0x61 and al, 0x10 mov ah, al cld .cnt1: in al, 0x61 and al, 0x10 cmp al, ah jz .cnt1 mov ah, al loop .cnt1 .done: popad ret ;----------------------------------------------------------------------------- align 4 set_app_param: mov edi, [current_slot] xchg ebx, [edi + APPDATA.event_mask] ; set new event mask mov [esp + SYSCALL_STACK.eax], ebx ; return old mask value ret ;----------------------------------------------------------------------------- ; this is for syscall proc delay_hs_unprotected call unprotect_from_terminate call delay_hs call protect_from_terminate ret endp if 1 align 4 delay_hs: ; delay in 1/100 secs ; ebx = delay time pushad push ebx xor esi, esi mov ecx, MANUAL_DESTROY call create_event test eax, eax jz .done mov ebx, edx mov ecx, [esp] push edx push eax call wait_event_timeout pop eax pop ebx call destroy_event .done: add esp, 4 popad ret else align 4 delay_hs: ; delay in 1/100 secs ; ebx = delay time push ecx push edx mov edx, [timer_ticks] ;-------------------------------------- align 4 .newtic: mov ecx, [timer_ticks] sub ecx, edx cmp ecx, ebx jae .zerodelay call change_task jmp .newtic ;-------------------------------------- align 4 .zerodelay: pop edx pop ecx ret end if ;----------------------------------------------------------------------------- align 16 ;very often call this subrutine memmove: ; memory move in bytes ; eax = from ; ebx = to ; ecx = no of bytes test ecx, ecx jle .ret push esi edi ecx mov edi, ebx mov esi, eax test ecx, not 11b jz @f push ecx shr ecx, 2 rep movsd pop ecx and ecx, 11b jz .finish ;-------------------------------------- align 4 @@: rep movsb ;-------------------------------------- align 4 .finish: pop ecx edi esi ;-------------------------------------- align 4 .ret: ret ;----------------------------------------------------------------------------- ; in: eax = port ; ebp = subfunction ; 0 - set access ; 1 - clear access ; out: not return value align 4 set_io_access_rights: push edi eax mov edi, tss._io_map_0 test ebp, ebp ; enable access - ebp = 0 jnz .siar1 btr [edi], eax pop eax edi ret .siar1: bts [edi], eax ; disable access - ebp = 1 pop eax edi ret align 4 ; @brief ReservePortArea and FreePortArea ; @param edx number end arrea of ports (include last number of port) ; @param ecx number start arrea of ports ; @param ebx sub function 0 - reserve, 1 - free ; @param eax 46 - number function ; @returns eax = 0 - succesful eax = 1 - error syscall_reserveportarea: ; ReservePortArea and FreePortArea call r_f_port_area mov [esp + SYSCALL_STACK.eax], eax ret ;reserve/free group of ports ; * eax = 46 - number function ; * ebx = 0 - reserve, 1 - free ; * ecx = number start arrea of ports ; * edx = number end arrea of ports (include last number of port) ;Return value: ; * eax = 0 - succesful ; * eax = 1 - error ; * The system has reserve this ports: ; 0..0x2d, 0x30..0x4d, 0x50..0xdf, 0xe5..0xff (include last number of port). ;destroys eax,ebx, ebp r_f_port_area: test ebx, ebx jnz .free_port_area cmp ecx, edx ; beginning > end ? ja .err cmp edx, 65536 ;test ebx, not 0xffff jae .err mov eax, [RESERVED_PORTS] test eax, eax ; no reserved areas ? je .rpal2 cmp eax, 255 ; max reserved jae .err .rpal3: mov ebx, eax shl ebx, 4 ;16 byte is sizeof item in RESERVED_PORTS table add ebx, RESERVED_PORTS cmp ecx, [ebx+8] ja .rpal4 cmp edx, [ebx+4] jae .err .rpal4: dec eax jnz .rpal3 jmp .rpal2 .err: xor eax, eax inc eax ret .rpal2: ; enable port access at port IO map pushad ; start enable io map mov eax, ecx xor ebp, ebp ; enable - eax = port cli .new_port_access: call set_io_access_rights inc eax cmp eax, edx jbe .new_port_access sti popad ; end enable io map mov eax, [RESERVED_PORTS] inc eax mov [RESERVED_PORTS], eax shl eax, 4 add eax, RESERVED_PORTS mov ebx, [current_slot] mov ebx, [ebx + APPDATA.tid] mov [eax], ebx ; tid mov [eax+4], ecx ;start port mov [eax+8], edx ;finish port xor eax, eax ret .free_port_area: mov eax, [RESERVED_PORTS]; no reserved areas ? test eax, eax jz .frpal2 mov ebx, [current_slot] mov ebx, [ebx + APPDATA.tid] .frpal3: mov edi, eax shl edi, 4 add edi, RESERVED_PORTS cmp ebx, [edi] jne .frpal4 cmp ecx, [edi+4] jne .frpal4 cmp edx, [edi+8] jne .frpal4 jmp .frpal1 .frpal4: dec eax jnz .frpal3 .frpal2: inc eax ret .frpal1: push ecx mov ecx, 256 sub ecx, eax shl ecx, 4 mov esi, edi add esi, 16 cld rep movsb dec dword [RESERVED_PORTS] ;disable port access at port IO map ; start disable io map pop eax ;start port ;cmp edx, 65536 ;jge no_mask_io xor ebp, ebp inc ebp .new_port_access_disable: ; disable - eax = port call set_io_access_rights inc eax cmp eax, edx jbe .new_port_access_disable ; end disable io map xor eax, eax ret ;----------------------------------------------------------------------------- align 4 drawbackground: cmp [BgrDrawMode], dword 1 jne .bgrstr call vesa20_drawbackground_tiled call __sys_draw_pointer ret ;-------------------------------------- align 4 .bgrstr: call vesa20_drawbackground_stretch call __sys_draw_pointer ret ;----------------------------------------------------------------------------- align 4 syscall_putimage: ; PutImage ; add check pointer push ecx mov ax, cx shr ecx, 16 imul eax, ecx lea eax, [eax*3] stdcall is_region_userspace, ebx, eax pop ecx jnz sys_putimage.exit sys_putimage: test ecx, 0x80008000 jnz .exit test ecx, 0x0000FFFF jz .exit test ecx, 0xFFFF0000 jnz @f ;-------------------------------------- align 4 .exit: ret ;-------------------------------------- align 4 @@: mov edi, [current_slot] mov edi, [edi + APPDATA.window] add dx, word[edi + WDATA.clientbox.top] rol edx, 16 add dx, word[edi + WDATA.clientbox.left] rol edx, 16 ;-------------------------------------- align 4 .forced: push ebp esi 0 mov ebp, putimage_get24bpp mov esi, putimage_init24bpp ;-------------------------------------- align 4 sys_putimage_bpp: call vesa20_putimage pop ebp esi ebp ret ; jmp [draw_pointer] ;----------------------------------------------------------------------------- align 4 sys_putimage_palette: ; ebx = pointer to image ; ecx = [xsize]*65536 + [ysize] ; edx = [xstart]*65536 + [ystart] ; esi = number of bits per pixel, must be 8, 24 or 32 ; edi = pointer to palette ; ebp = row delta ; check pointer push ecx esi mov ax, cx shr ecx, 16 imul eax, ecx ; imul eax, esi ; eax*count bit in 1 pixel ; shr eax, 3 stdcall is_region_userspace, ebx, eax pop esi ecx jnz sys_putimage.exit mov eax, [current_slot] mov eax, [eax + APPDATA.window] add dx, word [eax + WDATA.clientbox.top] rol edx, 16 add dx, word [eax + WDATA.clientbox.left] rol edx, 16 ;-------------------------------------- align 4 .forced: cmp esi, 1 jnz @f push edi mov eax, [edi+4] sub eax, [edi] push eax push dword [edi] push 0ffffff80h mov edi, esp call put_mono_image add esp, 12 pop edi ret ;-------------------------------------- align 4 @@: cmp esi, 2 jnz @f push edi push 0ffffff80h mov edi, esp call put_2bit_image pop eax pop edi ret ;-------------------------------------- align 4 @@: cmp esi, 4 jnz @f push edi push 0ffffff80h mov edi, esp call put_4bit_image pop eax pop edi ret ;-------------------------------------- align 4 @@: push ebp esi ebp cmp esi, 8 jnz @f mov ebp, putimage_get8bpp mov esi, putimage_init8bpp jmp sys_putimage_bpp ;-------------------------------------- align 4 @@: cmp esi, 9 jnz @f mov ebp, putimage_get9bpp mov esi, putimage_init9bpp jmp sys_putimage_bpp ;-------------------------------------- align 4 @@: cmp esi, 15 jnz @f mov ebp, putimage_get15bpp mov esi, putimage_init15bpp jmp sys_putimage_bpp ;-------------------------------------- align 4 @@: cmp esi, 16 jnz @f mov ebp, putimage_get16bpp mov esi, putimage_init16bpp jmp sys_putimage_bpp ;-------------------------------------- align 4 @@: cmp esi, 24 jnz @f mov ebp, putimage_get24bpp mov esi, putimage_init24bpp jmp sys_putimage_bpp ;-------------------------------------- align 4 @@: cmp esi, 32 jnz @f mov ebp, putimage_get32bpp mov esi, putimage_init32bpp jmp sys_putimage_bpp ;-------------------------------------- align 4 @@: pop ebp esi ebp ret ;----------------------------------------------------------------------------- align 4 put_mono_image: push ebp esi ebp mov ebp, putimage_get1bpp mov esi, putimage_init1bpp jmp sys_putimage_bpp ;----------------------------------------------------------------------------- align 4 put_2bit_image: push ebp esi ebp mov ebp, putimage_get2bpp mov esi, putimage_init2bpp jmp sys_putimage_bpp ;----------------------------------------------------------------------------- align 4 put_4bit_image: push ebp esi ebp mov ebp, putimage_get4bpp mov esi, putimage_init4bpp jmp sys_putimage_bpp ;----------------------------------------------------------------------------- align 4 putimage_init24bpp: lea eax, [eax*3] putimage_init8bpp: putimage_init9bpp: ret ;----------------------------------------------------------------------------- align 16 putimage_get24bpp: movzx eax, byte [esi+2] shl eax, 16 mov ax, [esi] add esi, 3 ret 4 ;----------------------------------------------------------------------------- align 16 putimage_get8bpp: movzx eax, byte [esi] push edx mov edx, [esp+8] mov eax, [edx + eax*4] pop edx inc esi ret 4 ;----------------------------------------------------------------------------- align 16 putimage_get9bpp: lodsb mov ah, al shl eax, 8 mov al, ah ret 4 ;----------------------------------------------------------------------------- align 4 putimage_init1bpp: add eax, ecx push ecx add eax, 7 add ecx, 7 shr eax, 3 shr ecx, 3 sub eax, ecx pop ecx ret ;----------------------------------------------------------------------------- align 16 putimage_get1bpp: push edx mov edx, [esp+8] mov al, [edx] add al, al jnz @f lodsb adc al, al @@: mov [edx], al sbb eax, eax and eax, [edx+8] add eax, [edx+4] pop edx ret 4 ;----------------------------------------------------------------------------- align 4 putimage_init2bpp: add eax, ecx push ecx add ecx, 3 add eax, 3 shr ecx, 2 shr eax, 2 sub eax, ecx pop ecx ret ;----------------------------------------------------------------------------- align 16 putimage_get2bpp: push edx mov edx, [esp+8] mov al, [edx] mov ah, al shr al, 6 shl ah, 2 jnz .nonewbyte lodsb mov ah, al shr al, 6 shl ah, 2 add ah, 1 .nonewbyte: mov [edx], ah mov edx, [edx+4] movzx eax, al mov eax, [edx + eax*4] pop edx ret 4 ;----------------------------------------------------------------------------- align 4 putimage_init4bpp: add eax, ecx push ecx add ecx, 1 inc eax ;add eax, 1 shr ecx, 1 shr eax, 1 sub eax, ecx pop ecx ret ;----------------------------------------------------------------------------- align 16 putimage_get4bpp: push edx mov edx, [esp+8] add byte [edx], 80h jc @f movzx eax, byte [edx+1] mov edx, [edx+4] and eax, 0x0F mov eax, [edx + eax*4] pop edx ret 4 @@: movzx eax, byte [esi] add esi, 1 mov [edx+1], al shr eax, 4 mov edx, [edx+4] mov eax, [edx + eax*4] pop edx ret 4 ;----------------------------------------------------------------------------- align 4 putimage_init32bpp: shl eax, 2 ret ;----------------------------------------------------------------------------- align 16 putimage_get32bpp: lodsd ret 4 ;----------------------------------------------------------------------------- align 4 putimage_init15bpp: putimage_init16bpp: add eax, eax ret ;----------------------------------------------------------------------------- align 16 putimage_get15bpp: ; 0RRRRRGGGGGBBBBB -> 00000000RRRRR000GGGGG000BBBBB000 push ecx edx movzx eax, word [esi] add esi, 2 mov ecx, eax mov edx, eax and eax, 0x1F and ecx, 0x1F shl 5 and edx, 0x1F shl 10 shl eax, 3 shl ecx, 6 shl edx, 9 or eax, ecx or eax, edx pop edx ecx ret 4 ;----------------------------------------------------------------------------- align 16 putimage_get16bpp: ; RRRRRGGGGGGBBBBB -> 00000000RRRRR000GGGGGG00BBBBB000 push ecx edx movzx eax, word [esi] add esi, 2 mov ecx, eax mov edx, eax and eax, 0x1F and ecx, 0x3F shl 5 and edx, 0x1F shl 11 shl eax, 3 shl ecx, 5 shl edx, 8 or eax, ecx or eax, edx pop edx ecx ret 4 ;----------------------------------------------------------------------------- ;align 4 ; eax x beginning ; ebx y beginning ; ecx x end ; edx y end ; edi color ;__sys_drawbar: ; mov esi, [current_slot] ; mov esi, [esi + APPDATA.window] ; add eax, [esi + WDATA.clientbox.left] ; add ecx, [esi + WDATA.clientbox.left] ; add ebx, [esi + WDATA.clientbox.top] ; add edx, [esi + WDATA.clientbox.top] ;-------------------------------------- ;align 4 ;.forced: ; call vesa20_drawbar ; call [draw_pointer] ; ret ;----------------------------------------------------------------------------- if used _rdtsc _rdtsc: bt [cpu_caps], CAPS_TSC jnc .ret_rdtsc rdtsc ret .ret_rdtsc: mov edx, 0xffffffff mov eax, 0xffffffff ret end if sys_msg_board_str: pushad @@: cmp [esi], byte 0 je @f mov ebx, 1 movzx ecx, byte [esi] call sys_msg_board inc esi jmp @b @@: popad ret sys_msg_board_byte: ; in: al = byte to display ; out: nothing ; destroys: nothing pushad mov ecx, 2 shl eax, 24 jmp @f sys_msg_board_word: ; in: ax = word to display ; out: nothing ; destroys: nothing pushad mov ecx, 4 shl eax, 16 jmp @f sys_msg_board_dword: ; in: eax = dword to display ; out: nothing ; destroys: nothing pushad mov ecx, 8 @@: push ecx rol eax, 4 push eax and al, 0xF cmp al, 10 sbb al, 69h das mov cl, al xor ebx, ebx inc ebx call sys_msg_board pop eax pop ecx loop @b popad ret msg_board_data_size = 65536 ; Must be power of two uglobal msg_board_data rb msg_board_data_size msg_board_count dd ? endg iglobal msg_board_pos dd 42*6*65536+10 ; for printing debug output on the screen endg sys_msg_board: ; ebx=1 -> write, cl = byte to write ; ebx=2 -> read, ecx=0 -> no data, ecx=1 -> data in al push eax ebx mov eax, ebx mov ebx, ecx mov ecx, [msg_board_count] cmp eax, 1 jne .read if defined debug_com_base push dx ax @@: ; wait for empty transmit register mov dx, debug_com_base+5 in al, dx test al, 1 shl 5 jz @r mov dx, debug_com_base ; Output the byte mov al, bl out dx, al pop ax dx end if mov [msg_board_data+ecx], bl cmp byte [debug_direct_print], 1 jnz .end pusha lea edx, [msg_board_data+ecx] mov ecx, 0x40FFFFFF mov ebx, [msg_board_pos] mov edi, 1 mov esi, edi ;1 call dtext popa add word [msg_board_pos+2], 6 cmp word [msg_board_pos+2], 105*6 jnc @f cmp bl, 10 jnz .end @@: mov word [msg_board_pos+2], 42*6 add word [msg_board_pos], 10 mov eax, [_display.height] sub eax, 10 cmp ax, word [msg_board_pos] jnc @f mov word [msg_board_pos], 10 @@: pusha mov eax, [msg_board_pos] movzx ebx, ax shr eax, 16 mov edx, 105*6 xor ecx, ecx mov edi, 1 mov esi, 9 @@: call hline inc ebx dec esi jnz @b popa .end: inc ecx and ecx, msg_board_data_size - 1 mov [msg_board_count], ecx .ret: pop ebx eax ret .read: cmp eax, 2 jne .ret add esp, 8 ; returning data in ebx and eax, so no need to restore them test ecx, ecx jnz @f mov [esp + SYSCALL_STACK.eax], ecx mov [esp + SYSCALL_STACK.ebx], ecx ret @@: mov eax, msg_board_data+1 mov ebx, msg_board_data movzx edx, byte [ebx] call memmove dec [msg_board_count] mov [esp + SYSCALL_STACK.eax], edx mov [esp + SYSCALL_STACK.ebx], 1 ret ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; 61 sys function. ;; ;; in eax=61,ebx in [1..3] ;; ;; out eax ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; iglobal align 4 f61call: dd sys_gs.1 ; resolution dd sys_gs.2 ; bits per pixel dd sys_gs.3 ; bytes per scanline endg align 4 sys_gs: ; direct screen access dec ebx cmp ebx, 2 ja .not_support jmp dword [f61call + ebx*4] .not_support: or [esp + SYSCALL_STACK.eax], dword -1 ret .1: ; resolution mov eax, [_display.width] shl eax, 16 mov ax, word [_display.height] mov [esp + SYSCALL_STACK.eax], eax ret .2: ; bits per pixel mov eax, [_display.bits_per_pixel] mov [esp + SYSCALL_STACK.eax], eax ret .3: ; bytes per scanline mov eax, [_display.lfb_pitch] mov [esp + SYSCALL_STACK.eax], eax ret align 4 syscall_getscreensize: ; GetScreenSize mov ax, word [_display.width] dec ax shl eax, 16 mov ax, word [_display.height] dec ax mov [esp + SYSCALL_STACK.eax], eax ret ;----------------------------------------------------------------------------- align 4 syscall_cdaudio: ; ECX - position of CD/DVD-drive ; from 0=Primary Master to 3=Secondary Slave for first IDE contr. ; from 4=Primary Master to 7=Secondary Slave for second IDE contr. ; from 8=Primary Master to 11=Secondary Slave for third IDE contr. cmp ecx, 11 ja .exit mov eax, ecx shr eax, 2 lea eax, [eax*5] mov al, [eax + DRIVE_DATA + 1] push ecx ebx mov ebx, ecx and ebx, 11b shl ebx, 1 mov cl, 6 sub cl, bl shr al, cl test al, 2 ; it's not an ATAPI device pop ebx ecx jz .exit cmp ebx, 4 je .eject cmp ebx, 5 je .load ;-------------------------------------- .exit: ret ;-------------------------------------- .load: call .reserve call LoadMedium jmp .free ;-------------------------------------- .eject: call .reserve call clear_CD_cache call allow_medium_removal call EjectMedium jmp .free ;-------------------------------------- .reserve: call reserve_cd mov ebx, ecx inc ebx mov [cdpos], ebx mov eax, ecx shr eax, 1 and eax, 1 inc eax mov [ChannelNumber], al mov eax, ecx and eax, 1 mov [DiskNumber], al call reserve_cd_channel ret ;-------------------------------------- .free: call free_cd_channel and [cd_status], 0 ret ;----------------------------------------------------------------------------- align 4 syscall_getpixel_WinMap: ; GetPixel WinMap xor eax, eax cmp ebx, [_display.width] jae .store cmp ecx, [_display.height] jae .store ;-------------------------------------- mov eax, [d_width_calc_area + ecx*4] add eax, [_display.win_map] movzx eax, byte[eax+ebx] ; get value for current point ;-------------------------------------- align 4 .store: mov [esp + SYSCALL_STACK.eax], eax ret ;----------------------------------------------------------------------------- align 4 syscall_getpixel: ; GetPixel mov ecx, [_display.width] xor edx, edx mov eax, ebx div ecx mov ebx, edx xchg eax, ebx and ecx, 0xFBFFFFFF ;negate 0x04000000 use mouseunder area call dword [GETPIXEL]; eax - x, ebx - y mov [esp + SYSCALL_STACK.eax], ecx ret ;----------------------------------------------------------------------------- align 4 syscall_getarea: ;eax = 36 ;ebx = pointer to bufer for img BBGGRRBBGGRR... ;ecx = [size x]*65536 + [size y] ;edx = [start x]*65536 + [start y] pushad mov edi, ebx mov eax, edx shr eax, 16 mov ebx, edx and ebx, 0xffff dec eax dec ebx ; eax - x, ebx - y mov edx, ecx shr ecx, 16 and edx, 0xffff mov esi, ecx ; ecx - size x, edx - size y mov ebp, edx lea ebp, [ebp*3] imul ebp, esi stdcall is_region_userspace, edi, ebp jnz .exit mov ebp, edx dec ebp lea ebp, [ebp*3] imul ebp, esi mov esi, ecx dec esi lea esi, [esi*3] add ebp, esi add ebp, edi add ebx, edx ;-------------------------------------- align 4 .start_y: push ecx edx ;-------------------------------------- align 4 .start_x: push eax ebx ecx add eax, ecx and ecx, 0xFBFFFFFF ;negate 0x04000000 use mouseunder area call dword [GETPIXEL]; eax - x, ebx - y mov [ebp], cx shr ecx, 16 mov [ebp+2], cl pop ecx ebx eax sub ebp, 3 dec ecx jnz .start_x pop edx ecx dec ebx dec edx jnz .start_y .exit: popad ret ;----------------------------------------------------------------------------- align 4 syscall_threads: ; CreateThreads ; ; ecx=thread entry point ; edx=thread stack pointer ; ; on return : eax = pid xor ebx, ebx call new_sys_threads mov [esp + SYSCALL_STACK.eax], eax ret ;------------------------------------------------------------------------------ align 4 calculate_fast_getting_offset_for_WinMapAddress: ; calculate data area for fast getting offset to _WinMapAddress xor eax, eax mov ecx, [_display.height] mov edi, d_width_calc_area cld @@: stosd add eax, [_display.width] dec ecx jnz @r ret ;------------------------------------------------------------------------------ align 4 calculate_fast_getting_offset_for_LFB: ; calculate data area for fast getting offset to LFB xor eax, eax mov ecx, [_display.height] mov edi, BPSLine_calc_area cld @@: stosd add eax, [_display.lfb_pitch] dec ecx jnz @r ret ;------------------------------------------------------------------------------ align 4 set_screen: ; in: ; eax - new Screen_Max_X ; ecx - new BytesPerScanLine ; edx - new Screen_Max_Y pushfd cli mov [_display.lfb_pitch], ecx mov [screen_workarea.right], eax mov [screen_workarea.bottom], edx push ebx push esi push edi pushad cmp [do_not_touch_winmap], 1 je @f stdcall kernel_free, [_display.win_map] mov eax, [_display.width] mul [_display.height] mov [_display.win_map_size], eax stdcall kernel_alloc, eax mov [_display.win_map], eax test eax, eax jz .epic_fail ; store for f.18.24 mov eax, [_display.width] mov [display_width_standard], eax mov eax, [_display.height] mov [display_height_standard], eax @@: call calculate_fast_getting_offset_for_WinMapAddress ; for Qemu or non standart video cards ; Unfortunately [BytesPerScanLine] does not always ; equal to [_display.width] * [ScreenBPP] / 8 call calculate_fast_getting_offset_for_LFB popad call repos_windows xor eax, eax xor ebx, ebx mov ecx, [_display.width] mov edx, [_display.height] dec ecx dec edx call calculatescreen pop edi pop esi pop ebx popfd ret .epic_fail: hlt ; Houston, we've had a problem ; --------------- APM --------------------- uglobal apm_entry dp 0 apm_vf dd 0 endg align 4 sys_apm: xor eax, eax cmp word [apm_vf], ax ; Check APM BIOS enable jne @f inc eax or dword [esp + 44], eax ; error add eax, 7 mov dword [esp + SYSCALL_STACK.eax], eax ; 32-bit protected-mode interface not supported ret @@: ; xchg eax, ecx ; xchg ebx, ecx cmp dx, 3 ja @f and [esp + 44], byte 0xfe ; emulate func 0..3 as func 0 mov eax, [apm_vf] mov [esp + SYSCALL_STACK.eax], eax shr eax, 16 mov [esp + SYSCALL_STACK.ecx], eax ret @@: mov esi, [master_tab+(OS_BASE shr 20)] xchg [master_tab], esi push esi mov edi, cr3 mov cr3, edi ;flush TLB call pword [apm_entry] ;call APM BIOS xchg eax, [esp] mov [master_tab], eax mov eax, cr3 mov cr3, eax pop eax mov [esp + SYSCALL_STACK.edi], edi mov [esp + SYSCALL_STACK.esi], esi mov [esp + SYSCALL_STACK.ebx], ebx mov [esp + SYSCALL_STACK.edx], edx mov [esp + SYSCALL_STACK.ecx], ecx mov [esp + SYSCALL_STACK.eax], eax setc al and [esp + 44], byte 0xfe or [esp + 44], al ret ; ----------------------------------------- align 4 undefined_syscall: ; Undefined system call mov [esp + SYSCALL_STACK.eax], dword -1 ret align 4 ; @brief Check if given memory region lays in lower 2gb (userspace memory) or not ; @param base Base address of region ; @param len Lenght of region ; @return ZF = 1 if region in userspace memory, ; ZF = 0 otherwise proc is_region_userspace stdcall, base:dword, len:dword push eax mov eax, [base] cmp eax, OS_BASE-1 ja @f ; zf add eax, [len] jc @f ; zf cmp eax, OS_BASE ja @f ; zf cmp eax, eax ; ZF @@: pop eax ret endp align 4 ; @brief Check whether given string lays in userspace memory, i.e. below OS_BASE ; @param base Base address of string ; @return ZF = 1 if string in userspace memory, ; zf = 0 otherwise proc is_string_userspace stdcall, base:dword push eax ecx edi xor eax, eax mov edi, [base] mov ecx, OS_BASE-1 sub ecx, edi jb .done ; zf inc ecx cmp ecx, 0x10000 ; don't allow strings larger than 64k? jbe @f mov ecx, 0x10000 @@: repnz scasb .done: pop edi ecx eax ret endp if ~ lang eq sp diff16 "end of .text segment",0,$ end if include "data32.inc" __REV__ = __REV if ~ lang eq sp diff16 "end of kernel code",0,$ end if