Burer/kolibrios
1
0
Fork 0
forked from KolibriOS/kolibrios
Code Pull Requests Activity
main
kolibrios/kernel/branches/kolibri-ahci/bus/usb/hccommon.inc
Rustem Gimadutdinov (rgimad) 73864ff1d7 Create kolibri-ahci branch 
git-svn-id: svn://kolibrios.org@9019 a494cfbc-eb01-0410-851d-a64ba20cac60
2021-07-07 21:36:03 +00:00

349 lines
12 KiB
PHP
Raw Permalink Blame History

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2013-2015. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
$Revision$
; USB Host Controller support code: hardware-independent part,
; common for all controller types.
iglobal
; USB HC support: some functions interesting only for *HCI-drivers.
align 4
usb_hc_func:
dd usb_process_gtd
dd usb_init_static_endpoint
dd usb_wakeup_if_needed
dd usb_subscribe_control
dd usb_subscription_done
dd slab_alloc
dd slab_free
dd usb_td_to_virt
dd usb_init_transfer
dd usb_undo_tds
dd usb_test_pending_port
dd usb_get_tt
dd usb_get_tt_think_time
dd usb_new_device
dd usb_disconnect_stage2
dd usb_process_wait_lists
dd usb_unlink_td
dd usb_is_final_packet
dd usb_find_ehci_companion
endg
; Initializes one controller, called by usb_init for every controller.
; eax -> PCIDEV structure for the device.
proc usb_init_controller
push ebp
mov ebp, esp
; 1. Store in the stack PCI coordinates and save pointer to PCIDEV:
; make [ebp-4] = (bus shl 8) + devfn, used by controller-specific Init funcs.
push dword [eax+PCIDEV.devfn]
push eax
mov edi, [eax+PCIDEV.owner]
test edi, edi
jz .nothing
mov edi, [edi+USBSRV.usb_func]
; 2. Allocate *hci_controller + usb_controller.
mov ebx, [edi+usb_hardware_func.DataSize]
add ebx, sizeof.usb_controller
stdcall kernel_alloc, ebx
test eax, eax
jz .nothing
; 3. Zero-initialize both structures.
push edi eax
mov ecx, ebx
shr ecx, 2
xchg edi, eax
xor eax, eax
rep stosd
; 4. Initialize usb_controller structure,
; except data known only to controller-specific code (like NumPorts)
; and link fields
; (this structure will be inserted to the overall list at step 6).
dec eax
mov [edi+usb_controller.ExistingAddresses+4-sizeof.usb_controller], eax
mov [edi+usb_controller.ExistingAddresses+8-sizeof.usb_controller], eax
mov [edi+usb_controller.ExistingAddresses+12-sizeof.usb_controller], eax
mov [edi+usb_controller.ResettingPort-sizeof.usb_controller], al ; no resetting port
dec eax ; don't allocate zero address
mov [edi+usb_controller.ExistingAddresses-sizeof.usb_controller], eax
mov eax, [ebp-4]
mov [edi+usb_controller.PCICoordinates-sizeof.usb_controller], eax
lea ecx, [edi+usb_controller.PeriodicLock-sizeof.usb_controller]
call mutex_init
add ecx, usb_controller.ControlLock - usb_controller.PeriodicLock
call mutex_init
add ecx, usb_controller.BulkLock - usb_controller.ControlLock
call mutex_init
pop eax edi
mov [eax+ebx-sizeof.usb_controller+usb_controller.HardwareFunc], edi
push eax
; 5. Call controller-specific initialization.
; If failed, free memory allocated in step 2 and return.
call [edi+usb_hardware_func.Init]
test eax, eax
jz .fail
pop ecx
; 6. Insert the controller to the global list.
xchg eax, ebx
mov ecx, usb_controllers_list_mutex
call mutex_lock
mov edx, usb_controllers_list
mov eax, [edx+usb_controller.Prev]
mov [ebx+usb_controller.Next], edx
mov [ebx+usb_controller.Prev], eax
mov [edx+usb_controller.Prev], ebx
mov [eax+usb_controller.Next], ebx
call mutex_unlock
; 7. Wakeup USB thread to call ProcessDeferred.
call usb_wakeup
.nothing:
; 8. Restore pointer to PCIDEV saved in step 1 and return.
pop eax
leave
ret
.fail:
call kernel_free
jmp .nothing
endp
; Helper function, calculates physical address including offset in page.
proc get_phys_addr
push ecx
mov ecx, eax
and ecx, 0xFFF
call get_pg_addr
add eax, ecx
pop ecx
ret
endp
; Put the given control/bulk pipe in the wait list;
; called when the pipe structure is changed and a possible hardware cache
; needs to be synchronized. When it will be known that the cache is updated,
; usb_subscription_done procedure will be called.
proc usb_subscribe_control
cmp [ebx+usb_pipe.NextWait], -1
jnz @f
mov eax, [esi+usb_controller.WaitPipeListAsync]
mov [ebx+usb_pipe.NextWait], eax
mov [esi+usb_controller.WaitPipeListAsync], ebx
@@:
ret
endp
; Same as usb_subscribe_control, but for interrupt/isochronous pipe.
proc usb_subscribe_periodic
cmp [ebx+usb_pipe.NextWait], -1
jnz @f
mov eax, [esi+usb_controller.WaitPipeListPeriodic]
mov [ebx+usb_pipe.NextWait], eax
mov [esi+usb_controller.WaitPipeListPeriodic], ebx
@@:
ret
endp
; Called after synchronization of hardware cache with software changes.
; Continues process of device enumeration based on when it was delayed
; due to call to usb_subscribe_control.
proc usb_subscription_done
mov eax, [ebx+usb_pipe.DeviceData]
cmp [eax+usb_device_data.DeviceDescrSize], 0
jz usb_after_set_address
jmp usb_after_set_endpoint_size
endp
; This function is called when a new device has either passed
; or failed first stages of configuration, so the next device
; can enter configuration process.
proc usb_test_pending_port
mov [esi+usb_controller.ResettingPort], -1
cmp [esi+usb_controller.PendingPorts], 0
jz .nothing
bsf ecx, [esi+usb_controller.PendingPorts]
btr [esi+usb_controller.PendingPorts], ecx
mov eax, [esi+usb_controller.HardwareFunc]
jmp [eax+usb_hardware_func.InitiateReset]
.nothing:
ret
endp
; This procedure is regularly called from controller-specific ProcessDeferred,
; it checks whether there are disconnected events and if so, process them.
proc usb_disconnect_stage2
bsf ecx, [esi+usb_controller.NewDisconnected]
jz .nothing
lock btr [esi+usb_controller.NewDisconnected], ecx
btr [esi+usb_controller.PendingPorts], ecx
xor ebx, ebx
xchg ebx, [esi+usb_controller.DevicesByPort+ecx*4]
test ebx, ebx
jz usb_disconnect_stage2
call usb_device_disconnected
jmp usb_disconnect_stage2
.nothing:
ret
endp
; Initial stage of disconnect processing: called when device is disconnected.
proc usb_device_disconnected
; Loop over all pipes, close everything, wait until hardware reacts.
; The final handling is done in usb_pipe_closed.
push ebx
mov ecx, [ebx+usb_pipe.DeviceData]
call mutex_lock
lea eax, [ecx+usb_device_data.OpenedPipeList-usb_pipe.NextSibling]
push eax
mov ebx, [eax+usb_pipe.NextSibling]
.pipe_loop:
call usb_close_pipe_nolock
mov ebx, [ebx+usb_pipe.NextSibling]
cmp ebx, [esp]
jnz .pipe_loop
pop eax
pop ebx
mov ecx, [ebx+usb_pipe.DeviceData]
call mutex_unlock
ret
endp
; Called from controller-specific ProcessDeferred,
; processes wait-pipe-done notifications,
; returns whether there are more items in wait queues.
; in: esi -> usb_controller
; out: eax = bitmask of pipe types with non-empty wait queue
proc usb_process_wait_lists
xor edx, edx
push edx
call usb_process_one_wait_list
jnc @f
or byte [esp], 1 shl CONTROL_PIPE
@@:
movi edx, 4
call usb_process_one_wait_list
jnc @f
or byte [esp], 1 shl INTERRUPT_PIPE
@@:
xor edx, edx
call usb_process_one_wait_list
jnc @f
or byte [esp], 1 shl CONTROL_PIPE
@@:
pop eax
ret
endp
; Helper procedure for usb_process_wait_lists;
; does the same for one wait queue.
; in: esi -> usb_controller,
; edx=0 for *Async, edx=4 for *Periodic list
; out: CF = issue new request
proc usb_process_one_wait_list
; 1. Check whether there is a pending request. If so, do nothing.
mov ebx, [esi+usb_controller.WaitPipeRequestAsync+edx]
cmp ebx, [esi+usb_controller.ReadyPipeHeadAsync+edx]
clc
jnz .nothing
; 2. Check whether there are new data. If so, issue a new request.
cmp ebx, [esi+usb_controller.WaitPipeListAsync+edx]
stc
jnz .nothing
test ebx, ebx
jz .nothing
; 3. Clear all lists.
xor ecx, ecx
mov [esi+usb_controller.WaitPipeListAsync+edx], ecx
mov [esi+usb_controller.WaitPipeRequestAsync+edx], ecx
mov [esi+usb_controller.ReadyPipeHeadAsync+edx], ecx
; 4. Loop over all pipes from the wait list.
.pipe_loop:
; For every pipe:
; 5. Save edx and next pipe in the list.
push edx
push [ebx+usb_pipe.NextWait]
; 6. If USB_FLAG_EXTRA_WAIT is set, reinsert the pipe to the list and continue.
test [ebx+usb_pipe.Flags], USB_FLAG_EXTRA_WAIT
jz .process
mov eax, [esi+usb_controller.WaitPipeListAsync+edx]
mov [ebx+usb_pipe.NextWait], eax
mov [esi+usb_controller.WaitPipeListAsync+edx], ebx
jmp .continue
.process:
; 7. Call the handler depending on USB_FLAG_CLOSED and USB_FLAG_DISABLED.
or [ebx+usb_pipe.NextWait], -1
test [ebx+usb_pipe.Flags], USB_FLAG_CLOSED
jz .nodisconnect
call usb_pipe_closed
jmp .continue
.nodisconnect:
test [ebx+usb_pipe.Flags], USB_FLAG_DISABLED
jz .nodisabled
call usb_pipe_disabled
jmp .continue
.nodisabled:
call usb_subscription_done
.continue:
; 8. Restore edx and next pipe saved in step 5 and continue the loop.
pop ebx
pop edx
test ebx, ebx
jnz .pipe_loop
.check_new_work:
; 9. Set CF depending on whether WaitPipeList* is nonzero.
cmp [esi+usb_controller.WaitPipeListAsync+edx], 1
cmc
.nothing:
ret
endp
; Called from USB1 controller-specific initialization.
; Finds EHCI companion controller for given USB1 controller.
; in: bl = PCI device:function for USB1 controller, bh = PCI bus
; out: eax -> usb_controller for EHCI companion
proc usb_find_ehci_companion
; 1. Loop over all registered controllers.
mov eax, usb_controllers_list
.next:
mov eax, [eax+usb_controller.Next]
cmp eax, usb_controllers_list
jz .notfound
; 2. For every controller, check the type, ignore everything that is not EHCI.
mov edx, [eax+usb_controller.HardwareFunc]
cmp [edx+usb_hardware_func.ID], 'EHCI'
jnz .next
; 3. For EHCI controller, compare PCI coordinates with input data:
; bus and device must be the same, function can be different.
mov edx, [eax+usb_controller.PCICoordinates]
xor edx, ebx
cmp dx, 8
jae .next
ret
.notfound:
xor eax, eax
ret
endp
; Find Transaction Translator hub and port for the given device.
; in: edx = parent hub for the device, ecx = port for the device
; out: edx = TT hub for the device, ecx = TT port for the device.
proc usb_get_tt
; If the parent hub is high-speed, it is TT for the device.
; Otherwise, the parent hub itself is behind TT, and the device
; has the same TT hub+port as the parent hub.
mov eax, [edx+usb_hub.ConfigPipe]
mov eax, [eax+usb_pipe.DeviceData]
cmp [eax+usb_device_data.Speed], USB_SPEED_HS
jz @f
movzx ecx, [eax+usb_device_data.TTPort]
mov edx, [eax+usb_device_data.TTHub]
@@:
mov edx, [edx+usb_hub.ConfigPipe]
ret
endp
View Git Blame Copy Permalink