Burer/kolibrios
1
0
Fork 0
forked from KolibriOS/kolibrios
Code Pull Requests Activity
main
kolibrios/kernel/branches/kolibri-ahci/bus/usb/pipe.inc
Rustem Gimadutdinov (rgimad) 73864ff1d7 Create kolibri-ahci branch 
git-svn-id: svn://kolibrios.org@9019 a494cfbc-eb01-0410-851d-a64ba20cac60
2021-07-07 21:36:03 +00:00

861 lines
30 KiB
PHP
Raw Permalink Blame History

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2013-2015. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
$Revision$
; Functions for USB pipe manipulation: opening/closing, sending data etc.
;
USB_STDCALL_VERIFY = 1
macro stdcall_verify [arg]
{
common
if USB_STDCALL_VERIFY
pushad
stdcall arg
call verify_regs
popad
else
stdcall arg
end if
}
if USB_STDCALL_VERIFY
STDCALL_VERIFY_EXTRA = 20h
else
STDCALL_VERIFY_EXTRA = 0
end if
; Initialization of usb_static_ep structure,
; called from controller-specific initialization; edi -> usb_static_ep
proc usb_init_static_endpoint
mov [edi+usb_static_ep.NextVirt], edi
mov [edi+usb_static_ep.PrevVirt], edi
ret
endp
; Part of API for drivers, see documentation for USBOpenPipe.
proc usb_open_pipe stdcall uses ebx esi edi,\
config_pipe:dword, endpoint:dword, maxpacket:dword, type:dword, interval:dword
locals
tt_vars rd 24 ; should be enough for ehci_select_tt_interrupt_list
targetsmask dd ? ; S-Mask for USB2
bandwidth dd ?
target dd ?
endl
; 1. Verify type of pipe: it must be one of *_PIPE constants.
; Isochronous pipes are not supported yet.
mov eax, [type]
cmp eax, INTERRUPT_PIPE
ja .badtype
cmp al, ISOCHRONOUS_PIPE
jnz .goodtype
.badtype:
dbgstr 'unsupported type of USB pipe'
jmp .return0
.goodtype:
; 2. Allocate memory for pipe and transfer queue.
; Empty transfer queue consists of one inactive TD.
mov ebx, [config_pipe]
mov esi, [ebx+usb_pipe.Controller]
mov edx, [esi+usb_controller.HardwareFunc]
call [edx+usb_hardware_func.AllocPipe]
test eax, eax
jz .nothing
mov edi, eax
mov edx, [esi+usb_controller.HardwareFunc]
call [edx+usb_hardware_func.AllocTD]
test eax, eax
jz .free_and_return0
; 3. Initialize transfer queue: pointer to transfer descriptor,
; pointers in transfer descriptor, queue lock.
mov [edi+usb_pipe.LastTD], eax
mov [eax+usb_gtd.NextVirt], eax
mov [eax+usb_gtd.PrevVirt], eax
mov [eax+usb_gtd.Pipe], edi
lea ecx, [edi+usb_pipe.Lock]
call mutex_init
; 4. Initialize software part of pipe structure, except device-related fields.
mov al, byte [type]
mov [edi+usb_pipe.Type], al
xor eax, eax
mov [edi+usb_pipe.Flags], al
mov [edi+usb_pipe.DeviceData], eax
mov [edi+usb_pipe.Controller], esi
or [edi+usb_pipe.NextWait], -1
; 5. Initialize device-related fields:
; for zero endpoint, set .NextSibling = .PrevSibling = this;
; for other endpoins, copy device data, take the lock guarding pipe list
; for the device and verify that disconnect processing has not yet started
; for the device. (Since disconnect processing also takes that lock,
; either it has completed or it will not start until we release the lock.)
; Note: usb_device_disconnected should not see the new pipe until
; initialization is complete, so that lock will be held during next steps
; (disconnect processing should either not see it at all, or see fully
; initialized pipe).
cmp [endpoint], eax
jz .zero_endpoint
mov ecx, [ebx+usb_pipe.DeviceData]
mov [edi+usb_pipe.DeviceData], ecx
call mutex_lock
test [ebx+usb_pipe.Flags], USB_FLAG_CLOSED
jz .common
.fail:
; If disconnect processing has completed, unlock the mutex, free memory
; allocated in step 2 and return zero.
call mutex_unlock
mov edx, [esi+usb_controller.HardwareFunc]
stdcall [edx+usb_hardware_func.FreeTD], [edi+usb_pipe.LastTD]
.free_and_return0:
mov edx, [esi+usb_controller.HardwareFunc]
stdcall [edx+usb_hardware_func.FreePipe], edi
.return0:
xor eax, eax
jmp .nothing
.zero_endpoint:
mov [edi+usb_pipe.NextSibling], edi
mov [edi+usb_pipe.PrevSibling], edi
.common:
; 6. Initialize hardware part of pipe structure.
; 6a. Acquire the corresponding mutex.
lea ecx, [esi+usb_controller.ControlLock]
cmp [type], BULK_PIPE
jb @f ; control pipe
lea ecx, [esi+usb_controller.BulkLock]
jz @f ; bulk pipe
lea ecx, [esi+usb_controller.PeriodicLock]
@@:
call mutex_lock
; 6b. Let the controller-specific code do its job.
push ecx
mov edx, [esi+usb_controller.HardwareFunc]
mov eax, [edi+usb_pipe.LastTD]
mov ecx, [config_pipe]
call [edx+usb_hardware_func.InitPipe]
pop ecx
; 6c. Release the mutex.
push eax
call mutex_unlock
pop eax
; 6d. If controller-specific code indicates failure,
; release the lock taken in step 5, free memory allocated in step 2
; and return zero.
test eax, eax
jz .fail
; 7. The pipe is initialized. If this is not the first pipe for the device,
; insert it to the tail of pipe list for the device,
; increment number of pipes,
; release the lock taken at step 5.
mov ecx, [edi+usb_pipe.DeviceData]
test ecx, ecx
jz @f
mov eax, [ebx+usb_pipe.PrevSibling]
mov [edi+usb_pipe.NextSibling], ebx
mov [edi+usb_pipe.PrevSibling], eax
mov [ebx+usb_pipe.PrevSibling], edi
mov [eax+usb_pipe.NextSibling], edi
inc [ecx+usb_device_data.NumPipes]
call mutex_unlock
@@:
; 8. Return pointer to usb_pipe.
mov eax, edi
.nothing:
ret
endp
; This procedure is called several times during initial device configuration,
; when usb_device_data structure is reallocated.
; It (re)initializes all pointers in usb_device_data.
; ebx -> usb_pipe
proc usb_reinit_pipe_list
push eax
; 1. (Re)initialize the lock guarding pipe list.
mov ecx, [ebx+usb_pipe.DeviceData]
call mutex_init
; 2. Initialize list of opened pipes: two entries, the head and ebx.
add ecx, usb_device_data.OpenedPipeList - usb_pipe.NextSibling
mov [ecx+usb_pipe.NextSibling], ebx
mov [ecx+usb_pipe.PrevSibling], ebx
mov [ebx+usb_pipe.NextSibling], ecx
mov [ebx+usb_pipe.PrevSibling], ecx
; 3. Initialize list of closed pipes: empty list, only the head is present.
add ecx, usb_device_data.ClosedPipeList - usb_device_data.OpenedPipeList
mov [ecx+usb_pipe.NextSibling], ecx
mov [ecx+usb_pipe.PrevSibling], ecx
pop eax
ret
endp
; Part of API for drivers, see documentation for USBClosePipe.
proc usb_close_pipe
push ebx esi ; save used registers to be stdcall
virtual at esp
rd 2 ; saved registers
dd ? ; return address
.pipe dd ?
end virtual
; 1. Lock the pipe list for the device.
mov ebx, [.pipe]
mov esi, [ebx+usb_pipe.Controller]
mov ecx, [ebx+usb_pipe.DeviceData]
call mutex_lock
; 2. Set the flag "the driver has abandoned this pipe, free it at any time".
lea ecx, [ebx+usb_pipe.Lock]
call mutex_lock
or [ebx+usb_pipe.Flags], USB_FLAG_CAN_FREE
call mutex_unlock
; 3. Call the worker function.
call usb_close_pipe_nolock
; 4. Unlock the pipe list for the device.
mov ecx, [ebx+usb_pipe.DeviceData]
call mutex_unlock
; 5. Wakeup the USB thread so that it can proceed with releasing that pipe.
push edi
call usb_wakeup
pop edi
; 6. Return.
pop esi ebx ; restore used registers to be stdcall
retn 4
endp
; Worker function for pipe closing. Called by usb_close_pipe API and
; from disconnect processing.
; The lock guarding pipe list for the device should be held by the caller.
; ebx -> usb_pipe, esi -> usb_controller
proc usb_close_pipe_nolock
; 1. Set the flag "pipe is closed, ignore new transfers".
; If it was already set, do nothing.
lea ecx, [ebx+usb_pipe.Lock]
call mutex_lock
bts dword [ebx+usb_pipe.Flags], USB_FLAG_CLOSED_BIT
jc .closed
call mutex_unlock
; 2. Remove the pipe from the list of opened pipes.
mov eax, [ebx+usb_pipe.NextSibling]
mov edx, [ebx+usb_pipe.PrevSibling]
mov [eax+usb_pipe.PrevSibling], edx
mov [edx+usb_pipe.NextSibling], eax
; 3. Unlink the pipe from hardware structures.
; 3a. Acquire the corresponding lock.
lea edx, [esi+usb_controller.WaitPipeListAsync]
lea ecx, [esi+usb_controller.ControlLock]
cmp [ebx+usb_pipe.Type], BULK_PIPE
jb @f ; control pipe
lea ecx, [esi+usb_controller.BulkLock]
jz @f ; bulk pipe
add edx, usb_controller.WaitPipeListPeriodic - usb_controller.WaitPipeListAsync
lea ecx, [esi+usb_controller.PeriodicLock]
@@:
push edx
call mutex_lock
push ecx
; 3b. Let the controller-specific code do its job.
test [ebx+usb_pipe.Flags], USB_FLAG_DISABLED
jnz @f
mov eax, [esi+usb_controller.HardwareFunc]
call [eax+usb_hardware_func.DisablePipe]
@@:
mov eax, [esi+usb_controller.HardwareFunc]
call [eax+usb_hardware_func.UnlinkPipe]
mov edx, [ebx+usb_pipe.NextVirt]
mov eax, [ebx+usb_pipe.PrevVirt]
mov [edx+usb_pipe.PrevVirt], eax
mov [eax+usb_pipe.NextVirt], edx
; 3c. Release the corresponding lock.
pop ecx
call mutex_unlock
; 4. Put the pipe into wait queue.
pop edx
cmp [ebx+usb_pipe.NextWait], -1
jz .insert_new
or [ebx+usb_pipe.Flags], USB_FLAG_EXTRA_WAIT
jmp .inserted
.insert_new:
mov eax, [edx]
mov [ebx+usb_pipe.NextWait], eax
mov [edx], ebx
.inserted:
; 5. Return.
ret
.closed:
call mutex_unlock
xor eax, eax
ret
endp
; This procedure is called when all transfers are aborted
; either due to call to usb_abort_pipe or due to pipe closing.
; It notifies all callbacks and frees all transfer descriptors.
; ebx -> usb_pipe, esi -> usb_controller, edi -> usb_hardware_func
; three stack parameters: status code for callback functions
; and descriptors where to start and stop.
proc usb_pipe_aborted
virtual at esp
dd ? ; return address
.status dd ? ; USB_STATUS_CLOSED or USB_STATUS_CANCELLED
.first_td dd ?
.last_td dd ?
end virtual
; Loop over all transfers, calling the driver with the given status
; and freeing all descriptors except the last one.
.loop:
mov edx, [.first_td]
cmp edx, [.last_td]
jz .done
mov ecx, [edx+usb_gtd.Callback]
test ecx, ecx
jz .no_callback
stdcall_verify ecx, ebx, [.status+12+STDCALL_VERIFY_EXTRA], \
[edx+usb_gtd.Buffer], 0, [edx+usb_gtd.UserData]
mov edx, [.first_td]
.no_callback:
mov eax, [edx+usb_gtd.NextVirt]
mov [.first_td], eax
stdcall [edi+usb_hardware_func.FreeTD], edx
jmp .loop
.done:
ret 12
endp
; This procedure is called when a pipe with USB_FLAG_CLOSED is removed from the
; corresponding wait list. It means that the hardware has fully forgot about it.
; ebx -> usb_pipe, esi -> usb_controller
proc usb_pipe_closed
push edi
mov edi, [esi+usb_controller.HardwareFunc]
; 1. Notify all registered callbacks with status USB_STATUS_CLOSED, if any,
; and free all transfer descriptors, including the last one.
lea ecx, [ebx+usb_pipe.Lock]
call mutex_lock
mov edx, [ebx+usb_pipe.LastTD]
test edx, edx
jz .no_transfer
mov eax, [edx+usb_gtd.NextVirt]
push edx
push eax
call mutex_unlock
push USB_STATUS_CLOSED
call usb_pipe_aborted
; It is safe to free LastTD here:
; usb_*_transfer_async do not enqueue new transfers if USB_FLAG_CLOSED is set.
stdcall [edi+usb_hardware_func.FreeTD], [ebx+usb_pipe.LastTD]
jmp @f
.no_transfer:
call mutex_unlock
@@:
; 2. Decrement number of pipes for the device.
; If this pipe is the last pipe, go to 5.
mov ecx, [ebx+usb_pipe.DeviceData]
call mutex_lock
dec [ecx+usb_device_data.NumPipes]
jz .last_pipe
call mutex_unlock
; 3. If the flag "the driver has abandoned this pipe" is set,
; free memory and return.
test [ebx+usb_pipe.Flags], USB_FLAG_CAN_FREE
jz .nofree
stdcall [edi+usb_hardware_func.FreePipe], ebx
pop edi
ret
; 4. Otherwise, add it to the list of closed pipes and return.
.nofree:
add ecx, usb_device_data.ClosedPipeList - usb_pipe.NextSibling
mov edx, [ecx+usb_pipe.PrevSibling]
mov [ebx+usb_pipe.NextSibling], ecx
mov [ebx+usb_pipe.PrevSibling], edx
mov [ecx+usb_pipe.PrevSibling], ebx
mov [edx+usb_pipe.NextSibling], ebx
pop edi
ret
.last_pipe:
; That was the last pipe for the device.
; 5. Notify device driver(s) about disconnect.
call mutex_unlock
mov eax, [ecx+usb_device_data.NumInterfaces]
test eax, eax
jz .notify_done
add ecx, [ecx+usb_device_data.Interfaces]
.notify_loop:
mov edx, [ecx+usb_interface_data.DriverFunc]
test edx, edx
jz @f
mov edx, [edx+USBSRV.usb_func]
cmp [edx+USBFUNC.strucsize], USBFUNC.device_disconnect + 4
jb @f
mov edx, [edx+USBFUNC.device_disconnect]
test edx, edx
jz @f
push eax ecx
stdcall_verify edx, [ecx+usb_interface_data.DriverData]
pop ecx eax
@@:
add ecx, sizeof.usb_interface_data
dec eax
jnz .notify_loop
.notify_done:
; 6. Kill the timer, if active.
; (Usually not; possible if device is disconnected
; while processing SET_ADDRESS request).
mov eax, [ebx+usb_pipe.DeviceData]
cmp [eax+usb_device_data.Timer], 0
jz @f
stdcall cancel_timer_hs, [eax+usb_device_data.Timer]
mov [eax+usb_device_data.Timer], 0
@@:
; 7. Bus address, if assigned, can now be reused.
call [edi+usb_hardware_func.GetDeviceAddress]
test eax, eax
jz @f
bts [esi+usb_controller.ExistingAddresses], eax
@@:
dbgstr 'USB device disconnected'
; 8. All drivers have returned from disconnect callback,
; so all drivers should not use any device-related pipes.
; Free the remaining pipes.
mov eax, [ebx+usb_pipe.DeviceData]
add eax, usb_device_data.ClosedPipeList - usb_pipe.NextSibling
push eax
mov eax, [eax+usb_pipe.NextSibling]
.free_loop:
cmp eax, [esp]
jz .free_done
push [eax+usb_pipe.NextSibling]
stdcall [edi+usb_hardware_func.FreePipe], eax
pop eax
jmp .free_loop
.free_done:
stdcall [edi+usb_hardware_func.FreePipe], ebx
pop eax
; 9. Free the usb_device_data structure.
sub eax, usb_device_data.ClosedPipeList - usb_pipe.NextSibling
call free
; 10. Return.
.nothing:
pop edi
ret
endp
; This procedure is called when a pipe with USB_FLAG_DISABLED is removed from the
; corresponding wait list. It means that the hardware has fully forgot about it.
; ebx -> usb_pipe, esi -> usb_controller
proc usb_pipe_disabled
push edi
mov edi, [esi+usb_controller.HardwareFunc]
; 1. Acquire pipe lock.
lea ecx, [ebx+usb_pipe.Lock]
call mutex_lock
; 2. Clear USB_FLAG_DISABLED in pipe state.
and [ebx+usb_pipe.Flags], not USB_FLAG_DISABLED
; 3. Sanity check: ignore uninitialized pipes.
cmp [ebx+usb_pipe.LastTD], 0
jz .no_transfer
; 4. Acquire the first and last to-be-cancelled transfer descriptor,
; save them in stack for the step 6,
; ask the controller driver to enable the pipe for hardware,
; removing transfers between first and last to-be-cancelled descriptors.
lea ecx, [esi+usb_controller.ControlLock]
cmp [ebx+usb_pipe.Type], BULK_PIPE
jb @f ; control pipe
lea ecx, [esi+usb_controller.BulkLock]
jz @f ; bulk pipe
lea ecx, [esi+usb_controller.PeriodicLock]
@@:
call mutex_lock
mov eax, [ebx+usb_pipe.BaseList]
mov edx, [eax+usb_pipe.NextVirt]
mov [ebx+usb_pipe.NextVirt], edx
mov [ebx+usb_pipe.PrevVirt], eax
mov [edx+usb_pipe.PrevVirt], ebx
mov [eax+usb_pipe.NextVirt], ebx
mov eax, [ebx+usb_pipe.LastTD]
mov edx, [eax+usb_gtd.NextVirt]
mov [eax+usb_gtd.NextVirt], eax
mov [eax+usb_gtd.PrevVirt], eax
push eax
push edx
push ecx
call [edi+usb_hardware_func.EnablePipe]
pop ecx
call mutex_unlock
; 5. Release pipe lock acquired at step 1.
; Callbacks called at step 6 can insert new transfers,
; so we cannot call usb_pipe_aborted while holding pipe lock.
lea ecx, [ebx+usb_pipe.Lock]
call mutex_unlock
; 6. Notify all registered callbacks with status USB_STATUS_CANCELLED, if any.
; Two arguments describing transfers range were pushed at step 4.
push USB_STATUS_CANCELLED
call usb_pipe_aborted
pop edi
ret
.no_transfer:
call mutex_unlock
pop edi
ret
endp
; Part of API for drivers, see documentation for USBNormalTransferAsync.
proc usb_normal_transfer_async stdcall uses ebx edi,\
pipe:dword, buffer:dword, size:dword, callback:dword, calldata:dword, flags:dword
; 1. Sanity check: callback must be nonzero.
; (It is important for other parts of code.)
xor eax, eax
cmp [callback], eax
jz .nothing
; 2. Lock the transfer queue.
mov ebx, [pipe]
lea ecx, [ebx+usb_pipe.Lock]
call mutex_lock
; 3. If the pipe has already been closed (presumably due to device disconnect),
; release the lock taken in step 2 and return zero.
xor eax, eax
test [ebx+usb_pipe.Flags], USB_FLAG_CLOSED
jnz .unlock
; 4. Allocate and initialize TDs for the transfer.
mov edx, [ebx+usb_pipe.Controller]
mov edi, [edx+usb_controller.HardwareFunc]
stdcall [edi+usb_hardware_func.AllocTransfer], [buffer], [size], [flags], [ebx+usb_pipe.LastTD], 0
; If failed, release the lock taken in step 2 and return zero.
test eax, eax
jz .unlock
; 5. Store callback and its parameters in the last descriptor for this transfer.
mov ecx, [eax+usb_gtd.PrevVirt]
mov edx, [callback]
mov [ecx+usb_gtd.Callback], edx
mov edx, [calldata]
mov [ecx+usb_gtd.UserData], edx
mov edx, [buffer]
mov [ecx+usb_gtd.Buffer], edx
; 6. Advance LastTD pointer and activate transfer.
push [ebx+usb_pipe.LastTD]
mov [ebx+usb_pipe.LastTD], eax
call [edi+usb_hardware_func.InsertTransfer]
pop eax
; 7. Release the lock taken in step 2 and
; return pointer to the first descriptor for the new transfer.
.unlock:
push eax
lea ecx, [ebx+usb_pipe.Lock]
call mutex_unlock
pop eax
.nothing:
ret
endp
; Part of API for drivers, see documentation for USBControlTransferAsync.
proc usb_control_async stdcall uses ebx edi,\
pipe:dword, config:dword, buffer:dword, size:dword, callback:dword, calldata:dword, flags:dword
locals
last_td dd ?
endl
; 1. Sanity check: callback must be nonzero.
; (It is important for other parts of code.)
cmp [callback], 0
jz .return0
; 2. Lock the transfer queue.
mov ebx, [pipe]
lea ecx, [ebx+usb_pipe.Lock]
call mutex_lock
; 3. If the pipe has already been closed (presumably due to device disconnect),
; release the lock taken in step 2 and return zero.
test [ebx+usb_pipe.Flags], USB_FLAG_CLOSED
jnz .unlock_return0
; A control transfer contains two or three stages:
; Setup stage, optional Data stage, Status stage.
; 4. Allocate and initialize TDs for the Setup stage.
; Payload is 8 bytes from [config].
mov edx, [ebx+usb_pipe.Controller]
mov edi, [edx+usb_controller.HardwareFunc]
stdcall [edi+usb_hardware_func.AllocTransfer], [config], 8, 0, [ebx+usb_pipe.LastTD], (2 shl 2) + 0
; short transfer is an error, direction is DATA0, token is SETUP
mov [last_td], eax
test eax, eax
jz .fail
; 5. Allocate and initialize TDs for the Data stage, if [size] is nonzero.
; Payload is [size] bytes from [buffer].
mov edx, [config]
mov ecx, (3 shl 2) + 1 ; DATA1, token is OUT
cmp byte [edx], 0
jns @f
cmp [size], 0
jz @f
inc ecx ; token is IN
@@:
cmp [size], 0
jz .nodata
push ecx
stdcall [edi+usb_hardware_func.AllocTransfer], [buffer], [size], [flags], eax, ecx
pop ecx
test eax, eax
jz .fail
mov [last_td], eax
.nodata:
; 6. Allocate and initialize TDs for the Status stage.
; No payload.
xor ecx, 3 ; IN becomes OUT, OUT becomes IN
stdcall [edi+usb_hardware_func.AllocTransfer], 0, 0, 0, eax, ecx
test eax, eax
jz .fail
; 7. Store callback and its parameters in the last descriptor for this transfer.
mov ecx, [eax+usb_gtd.PrevVirt]
mov edx, [callback]
mov [ecx+usb_gtd.Callback], edx
mov edx, [calldata]
mov [ecx+usb_gtd.UserData], edx
mov edx, [buffer]
mov [ecx+usb_gtd.Buffer], edx
; 8. Advance LastTD pointer and activate transfer.
push [ebx+usb_pipe.LastTD]
mov [ebx+usb_pipe.LastTD], eax
call [edi+usb_hardware_func.InsertTransfer]
; 9. Release the lock taken in step 2 and
; return pointer to the first descriptor for the new transfer.
lea ecx, [ebx+usb_pipe.Lock]
call mutex_unlock
pop eax
ret
.fail:
mov eax, [last_td]
test eax, eax
jz .unlock_return0
stdcall usb_undo_tds, [ebx+usb_pipe.LastTD]
.unlock_return0:
lea ecx, [ebx+usb_pipe.Lock]
call mutex_unlock
.return0:
xor eax, eax
ret
endp
; Part of API for drivers, see documentation for USBAbortPipe.
proc usb_abort_pipe
push ebx esi ; save used registers to be stdcall
virtual at esp
rd 2 ; saved registers
dd ? ; return address
.pipe dd ?
end virtual
mov ebx, [.pipe]
; 1. Acquire pipe lock.
lea ecx, [ebx+usb_pipe.Lock]
call mutex_lock
; 2. If the pipe is already closed or abort is in progress,
; just release pipe lock and return.
test [ebx+usb_pipe.Flags], USB_FLAG_CLOSED + USB_FLAG_DISABLED
jnz .nothing
; 3. Mark the pipe as aborting.
or [ebx+usb_pipe.Flags], USB_FLAG_DISABLED
; 4. We cannot do anything except adding new transfers concurrently with hardware.
; Ask the controller driver to (temporarily) remove the pipe from hardware queue.
mov esi, [ebx+usb_pipe.Controller]
; 4a. Acquire queue lock.
lea ecx, [esi+usb_controller.ControlLock]
cmp [ebx+usb_pipe.Type], BULK_PIPE
jb @f ; control pipe
lea ecx, [esi+usb_controller.BulkLock]
jz @f ; bulk pipe
lea ecx, [esi+usb_controller.PeriodicLock]
@@:
call mutex_lock
push ecx
; 4b. Call the driver.
mov eax, [esi+usb_controller.HardwareFunc]
call [eax+usb_hardware_func.DisablePipe]
; 4c. Remove the pipe from software list.
mov eax, [ebx+usb_pipe.NextVirt]
mov edx, [ebx+usb_pipe.PrevVirt]
mov [eax+usb_pipe.PrevVirt], edx
mov [edx+usb_pipe.NextVirt], eax
; 4c. Register the pipe in corresponding wait list.
test [ebx+usb_pipe.Type], 1
jz .control_bulk
call usb_subscribe_periodic
jmp @f
.control_bulk:
call usb_subscribe_control
@@:
; 4d. Release queue lock.
pop ecx
call mutex_unlock
; 4e. Notify the USB thread about new work.
push ebx esi edi
call usb_wakeup
pop edi esi ebx
; That's all for now. To be continued in usb_pipe_disabled.
; 5. Release pipe lock acquired at step 1 and return.
.nothing:
lea ecx, [ebx+usb_pipe.Lock]
call mutex_unlock
pop esi ebx
ret 4
endp
; Part of API for drivers, see documentation for USBGetParam.
proc usb_get_param
virtual at esp
dd ? ; return address
.pipe dd ?
.param dd ?
end virtual
mov edx, [.param]
mov ecx, [.pipe]
mov eax, [ecx+usb_pipe.DeviceData]
test edx, edx
jz .get_device_descriptor
dec edx
jz .get_config_descriptor
dec edx
jz .get_speed
or eax, -1
ret 8
.get_device_descriptor:
add eax, usb_device_data.DeviceDescriptor
ret 8
.get_config_descriptor:
movzx ecx, [eax+usb_device_data.DeviceDescrSize]
lea eax, [eax+ecx+usb_device_data.DeviceDescriptor]
ret 8
.get_speed:
movzx eax, [eax+usb_device_data.Speed]
ret 8
endp
; Initialize software part of usb_gtd. Called from controller-specific code
; somewhere in AllocTransfer with eax -> next (inactive) usb_gtd,
; ebx -> usb_pipe, ebp frame from call to AllocTransfer with [.td] ->
; current (initializing) usb_gtd.
; Returns ecx = [.td].
proc usb_init_transfer
virtual at ebp-4
.Size dd ?
rd 2
.Buffer dd ?
dd ?
.Flags dd ?
.td dd ?
end virtual
mov [eax+usb_gtd.Pipe], ebx
mov ecx, [.td]
mov [eax+usb_gtd.PrevVirt], ecx
mov edx, [ecx+usb_gtd.NextVirt]
mov [ecx+usb_gtd.NextVirt], eax
mov [eax+usb_gtd.NextVirt], edx
mov [edx+usb_gtd.PrevVirt], eax
mov edx, [.Size]
mov [ecx+usb_gtd.Length], edx
xor edx, edx
mov [ecx+usb_gtd.Callback], edx
mov [ecx+usb_gtd.UserData], edx
ret
endp
; Free all TDs for the current transfer if something has failed
; during initialization (e.g. no memory for the next TD).
; Stdcall with one stack argument = first TD for the transfer
; and eax = last initialized TD for the transfer.
proc usb_undo_tds
push [eax+usb_gtd.NextVirt]
@@:
cmp eax, [esp+8]
jz @f
push [eax+usb_gtd.PrevVirt]
stdcall [edi+usb_hardware_func.FreeTD], eax
pop eax
jmp @b
@@:
pop ecx
mov [eax+usb_gtd.NextVirt], ecx
mov [ecx+usb_gtd.PrevVirt], eax
ret 4
endp
; Helper procedure for handling short packets in controller-specific code.
; Returns with CF cleared if this is the final packet in some stage:
; for control transfers that means one of Data and Status stages,
; for other transfers - the final packet in the only stage.
proc usb_is_final_packet
cmp [ebx+usb_gtd.Callback], 0
jnz .nothing
mov eax, [ebx+usb_gtd.NextVirt]
cmp [eax+usb_gtd.Callback], 0
jz .stc
mov eax, [ebx+usb_gtd.Pipe]
cmp [eax+usb_pipe.Type], CONTROL_PIPE
jz .nothing
.stc:
stc
.nothing:
ret
endp
; Helper procedure for controller-specific code:
; removes one TD from the transfer queue, ebx -> usb_gtd to remove.
proc usb_unlink_td
mov ecx, [ebx+usb_gtd.Pipe]
add ecx, usb_pipe.Lock
call mutex_lock
mov eax, [ebx+usb_gtd.PrevVirt]
mov edx, [ebx+usb_gtd.NextVirt]
mov [edx+usb_gtd.PrevVirt], eax
mov [eax+usb_gtd.NextVirt], edx
call mutex_unlock
ret
endp
; One part of transfer is completed, run the associated callback
; or update total length in the next part of transfer.
; in: ebx -> usb_gtd, ecx = status, edx = length
proc usb_process_gtd
; 1. Test whether it is the last descriptor in the transfer
; <=> it has an associated callback.
mov eax, [ebx+usb_gtd.Callback]
test eax, eax
jz .nocallback
; 2. It has an associated callback; call it with corresponding parameters.
stdcall_verify eax, [ebx+usb_gtd.Pipe], ecx, \
[ebx+usb_gtd.Buffer], edx, [ebx+usb_gtd.UserData]
ret
.nocallback:
; 3. It is an intermediate descriptor. Add its length to the length
; in the following descriptor.
mov eax, [ebx+usb_gtd.NextVirt]
add [eax+usb_gtd.Length], edx
ret
endp
if USB_STDCALL_VERIFY
proc verify_regs
virtual at esp
dd ? ; return address
.edi dd ?
.esi dd ?
.ebp dd ?
.esp dd ?
.ebx dd ?
.edx dd ?
.ecx dd ?
.eax dd ?
end virtual
cmp ebx, [.ebx]
jz @f
dbgstr 'ERROR!!! ebx changed'
@@:
cmp esi, [.esi]
jz @f
dbgstr 'ERROR!!! esi changed'
@@:
cmp edi, [.edi]
jz @f
dbgstr 'ERROR!!! edi changed'
@@:
cmp ebp, [.ebp]
jz @f
dbgstr 'ERROR!!! ebp changed'
@@:
ret
endp
end if
View Git Blame Copy Permalink