forked from KolibriOS/kolibrios
kolibri-ahci:
- fix bugs with prdt overflow - full refactoring of disk reading - added fdo verbosity control - other changes git-svn-id: svn://kolibrios.org@9162 a494cfbc-eb01-0410-851d-a64ba20cac60
This commit is contained in:
parent
3fa8866797
commit
617b2bf8c3
@ -10,6 +10,8 @@ $Revision$
|
|||||||
PCI_REG_STATUS_COMMAND = 0x0004
|
PCI_REG_STATUS_COMMAND = 0x0004
|
||||||
PCI_REG_BAR5 = 0x0024
|
PCI_REG_BAR5 = 0x0024
|
||||||
|
|
||||||
|
AHCI_DBGLVL = 0 ; debug output verbosity level. 0 - less verbose, 1 - more verbose
|
||||||
|
|
||||||
; different SATA device signatures
|
; different SATA device signatures
|
||||||
SATA_SIG_ATA = 0x00000101 ; SATA drive
|
SATA_SIG_ATA = 0x00000101 ; SATA drive
|
||||||
SATA_SIG_ATAPI = 0xEB140101 ; SATAPI drive
|
SATA_SIG_ATAPI = 0xEB140101 ; SATAPI drive
|
||||||
@ -26,6 +28,7 @@ AHCI_DEV_SATAPI = 4
|
|||||||
; ATA commands
|
; ATA commands
|
||||||
ATA_IDENTIFY = 0xEC
|
ATA_IDENTIFY = 0xEC
|
||||||
ATA_CMD_READ_DMA_EX = 0x25
|
ATA_CMD_READ_DMA_EX = 0x25
|
||||||
|
ATA_CMD_WRITE_DMA_EX = 0x35
|
||||||
|
|
||||||
; ATA constants
|
; ATA constants
|
||||||
ATA_DEV_BUSY = 0x80
|
ATA_DEV_BUSY = 0x80
|
||||||
@ -34,6 +37,8 @@ ATA_DEV_DRQ = 0x08
|
|||||||
; ATAPI commands
|
; ATAPI commands
|
||||||
ATAPI_IDENTIFY = 0xA1
|
ATAPI_IDENTIFY = 0xA1
|
||||||
|
|
||||||
|
PRDT_MAX_ENTRIES = 16 ;65535
|
||||||
|
|
||||||
; bit_ prefix means that its index of bit
|
; bit_ prefix means that its index of bit
|
||||||
; format: bit_AHCI_STR_REG_BIT
|
; format: bit_AHCI_STR_REG_BIT
|
||||||
bit_AHCI_HBA_CAP2_BOH = 0 ; Supports BIOS/OS Handoff
|
bit_AHCI_HBA_CAP2_BOH = 0 ; Supports BIOS/OS Handoff
|
||||||
@ -504,7 +509,7 @@ ahci_init:
|
|||||||
DEBUGF 1, "Supports Staggered Spin-up, spinning up the port..\n"
|
DEBUGF 1, "Supports Staggered Spin-up, spinning up the port..\n"
|
||||||
or [edi + HBA_PORT.command], (0x0002 or 0x0004 or 0x10000000)
|
or [edi + HBA_PORT.command], (0x0002 or 0x0004 or 0x10000000)
|
||||||
push ebx
|
push ebx
|
||||||
mov ebx, 1 ; wait 10 ms
|
mov ebx, 10 ; wait 100 ms
|
||||||
call delay_hs
|
call delay_hs
|
||||||
pop ebx
|
pop ebx
|
||||||
@@:
|
@@:
|
||||||
@ -750,44 +755,29 @@ proc ahci_querymedia stdcall, pdata, mediainfo
|
|||||||
ret
|
ret
|
||||||
endp
|
endp
|
||||||
|
|
||||||
; Read sectors
|
; Read/write sectors
|
||||||
; return value: 0 = success, otherwise = error
|
; return value: 0 = success, otherwise = error
|
||||||
proc ahci_read stdcall pdata: dword, buffer: dword, startsector: qword, numsectors_ptr:dword
|
proc ahci_rw_sectors stdcall pdata: dword, vbuf: dword, startsector: qword, numsectors: dword, is_write: dword
|
||||||
locals
|
locals
|
||||||
cmdslot dd ?
|
cmdslot dd ?
|
||||||
cmdheader dd ?
|
cmdheader dd ?
|
||||||
cmdtable dd ?
|
cmdtable dd ?
|
||||||
numsectors dd ?
|
vbuf_orig dd ?
|
||||||
buffer_pos dd ?
|
vbuf_len dd ?
|
||||||
buffer_length dd ?
|
phys_region_start dd ?
|
||||||
|
new_phys_region_start dd ?
|
||||||
|
cur_prd dd ?
|
||||||
|
cur_phys dd ?
|
||||||
|
dbc dd ?
|
||||||
|
cur_phys_page dd ?
|
||||||
|
next_phys_page dd ?
|
||||||
|
cur_antioffset dd ?
|
||||||
|
prdt_bytes_total dd ?
|
||||||
endl
|
endl
|
||||||
|
|
||||||
pushad
|
pushad
|
||||||
|
|
||||||
mov ecx, ahci_mutex
|
DEBUGF AHCI_DBGLVL, " ahci_rw_sectors: buffer = 0x%x, startsector = 0x%x:%x, numsectors = %u, is_write = %u\n", [vbuf], [startsector], [startsector + 4], [numsectors], [is_write]:1
|
||||||
call mutex_lock
|
|
||||||
|
|
||||||
; xor ecx, ecx
|
|
||||||
; mov esi, [buffer]
|
|
||||||
; .print_data:
|
|
||||||
; cmp ecx, 512
|
|
||||||
; jae .end_print_data
|
|
||||||
|
|
||||||
; mov al, byte [esi + ecx]
|
|
||||||
; mov byte [tmpstr], al
|
|
||||||
; mov byte [tmpstr + 1], 0
|
|
||||||
; DEBUGF 1, "0x%x(%s) ", al:2, tmpstr
|
|
||||||
|
|
||||||
; inc ecx
|
|
||||||
; jmp .print_data
|
|
||||||
; .end_print_data:
|
|
||||||
; DEBUGF 1, "\n"
|
|
||||||
|
|
||||||
mov eax, [numsectors_ptr]
|
|
||||||
mov eax, [eax]
|
|
||||||
mov [numsectors], eax
|
|
||||||
|
|
||||||
DEBUGF 1, " ahci_read: buffer = 0x%x, startsector = 0x%x:%x, numsectors = %u\n", [buffer], [startsector], [startsector + 4], eax
|
|
||||||
|
|
||||||
mov esi, [pdata] ; esi - address of PORT_DATA struct of port
|
mov esi, [pdata] ; esi - address of PORT_DATA struct of port
|
||||||
mov edi, [esi + PORT_DATA.port] ; edi - address of HBA_PORT struct of port
|
mov edi, [esi + PORT_DATA.port] ; edi - address of HBA_PORT struct of port
|
||||||
@ -796,12 +786,12 @@ proc ahci_read stdcall pdata: dword, buffer: dword, startsector: qword, numsecto
|
|||||||
cmp eax, -1
|
cmp eax, -1
|
||||||
jne .cmdslot_found
|
jne .cmdslot_found
|
||||||
|
|
||||||
DEBUGF 1, "No free cmdslot on port %u\n", [esi + PORT_DATA.portno]
|
DEBUGF AHCI_DBGLVL, "No free cmdslot on port %u\n", [esi + PORT_DATA.portno]
|
||||||
jmp .ret
|
jmp .fail
|
||||||
|
|
||||||
.cmdslot_found:
|
.cmdslot_found:
|
||||||
mov [cmdslot], eax
|
mov [cmdslot], eax
|
||||||
DEBUGF 1, "Found free cmdslot %u on port %u\n", [cmdslot], [esi + PORT_DATA.portno]
|
DEBUGF AHCI_DBGLVL, "Found free cmdslot %u on port %u\n", [cmdslot], [esi + PORT_DATA.portno]
|
||||||
|
|
||||||
shl eax, BSF sizeof.HBA_CMD_HDR
|
shl eax, BSF sizeof.HBA_CMD_HDR
|
||||||
add eax, [esi + PORT_DATA.clb]
|
add eax, [esi + PORT_DATA.clb]
|
||||||
@ -815,81 +805,140 @@ proc ahci_read stdcall pdata: dword, buffer: dword, startsector: qword, numsecto
|
|||||||
or [eax + HBA_CMD_HDR.flags1], (sizeof.FIS_REG_H2D / 4) ; set command fis length in dwords
|
or [eax + HBA_CMD_HDR.flags1], (sizeof.FIS_REG_H2D / 4) ; set command fis length in dwords
|
||||||
movzx bx, [eax + HBA_CMD_HDR.flags1]
|
movzx bx, [eax + HBA_CMD_HDR.flags1]
|
||||||
btr bx, 6 ; flag W = 0
|
btr bx, 6 ; flag W = 0
|
||||||
|
cmp [is_write], 1 ; if is_write then set W flag
|
||||||
|
jne @f
|
||||||
|
bts bx, 6
|
||||||
|
@@:
|
||||||
mov [eax + HBA_CMD_HDR.flags1], bl
|
mov [eax + HBA_CMD_HDR.flags1], bl
|
||||||
movzx bx, [eax + HBA_CMD_HDR.flags2]
|
movzx bx, [eax + HBA_CMD_HDR.flags2]
|
||||||
btr bx, 2 ; flag C = 0
|
btr bx, 2 ; flag C = 0
|
||||||
mov [eax + HBA_CMD_HDR.flags2], bl
|
mov [eax + HBA_CMD_HDR.flags2], bl
|
||||||
|
|
||||||
|
mov eax, [vbuf]
|
||||||
|
mov [vbuf_orig], eax
|
||||||
mov ebx, [numsectors]
|
mov ebx, [numsectors]
|
||||||
shl ebx, 9 ; *= 512
|
shl ebx, 9 ; *= 512
|
||||||
mov [buffer_length], ebx
|
mov [vbuf_len], ebx
|
||||||
dec ebx
|
DEBUGF AHCI_DBGLVL, "vbuf_len = %u bytes\n", ebx
|
||||||
shr ebx, 12 ; /= 4096
|
|
||||||
inc ebx
|
|
||||||
mov [eax + HBA_CMD_HDR.prdtl], bx
|
|
||||||
;DEBUGF 1, " prdtl = %u\n", [eax + HBA_CMD_HDR.prdtl]:2
|
|
||||||
|
|
||||||
; zero out the command table with its prdt entries
|
mov ebx, [vbuf]
|
||||||
dec ebx
|
|
||||||
shl ebx, BSF sizeof.HBA_PRDT_ENTRY
|
|
||||||
add ebx, sizeof.HBA_CMD_TBL
|
|
||||||
stdcall _memset, [cmdtable], 0, ebx
|
|
||||||
|
|
||||||
DEBUGF 1, " prdtl = %u\n", [eax + HBA_CMD_HDR.prdtl]:2
|
|
||||||
;jmp .ret
|
|
||||||
|
|
||||||
xor ecx, ecx
|
|
||||||
movzx edx, [eax + HBA_CMD_HDR.prdtl]
|
|
||||||
dec edx
|
|
||||||
mov eax, [buffer]
|
|
||||||
mov [buffer_pos], eax
|
|
||||||
|
|
||||||
.prdt_fill:
|
|
||||||
cmp ecx, edx
|
|
||||||
jae .prdt_fill_end
|
|
||||||
|
|
||||||
mov ebx, [buffer_pos]
|
|
||||||
and ebx, 0xFFF
|
and ebx, 0xFFF
|
||||||
mov eax, [buffer_pos]
|
mov eax, [vbuf]
|
||||||
call get_pg_addr ; eax = phys addr
|
call get_pg_addr
|
||||||
add eax, ebx
|
add eax, ebx
|
||||||
DEBUGF 1, " PHYS = 0x%x\n", eax
|
mov [phys_region_start], eax
|
||||||
mov ebx, ecx
|
mov [prdt_bytes_total], 0
|
||||||
shl ebx, BSF sizeof.HBA_PRDT_ENTRY
|
mov [cur_prd], 0
|
||||||
add ebx, [cmdtable]
|
.fill_prdt:
|
||||||
add ebx, HBA_CMD_TBL.prdt_entry ; now ebx - address of ecx'th prdt_entry
|
cmp [vbuf_len], 0
|
||||||
|
jbe .fill_prdt_end
|
||||||
|
|
||||||
mov [ebx + HBA_PRDT_ENTRY.dba], eax
|
mov eax, [vbuf]
|
||||||
mov [ebx + HBA_PRDT_ENTRY.dbau], 0
|
call get_pg_addr
|
||||||
and [ebx + HBA_PRDT_ENTRY.flags], not 0x3FFFFF ; zero out lower 22 bits, they used for byte count
|
mov [cur_phys_page], eax
|
||||||
or [ebx + HBA_PRDT_ENTRY.flags], 4096 - 1 ; reason why -1 see in spec on this field
|
mov eax, [vbuf]
|
||||||
; or [eax + HBA_CMD_TBL.prdt_entry + HBA_PRDT_ENTRY.flags], 1 shl 31 ; enable interrupt on completion
|
add eax, 4096
|
||||||
add [buffer_pos], 4096
|
call get_pg_addr
|
||||||
sub [buffer_length], 4096
|
mov [next_phys_page], eax
|
||||||
|
mov eax, 4096
|
||||||
inc ecx
|
mov ebx, [vbuf]
|
||||||
jmp .prdt_fill
|
|
||||||
.prdt_fill_end:
|
|
||||||
|
|
||||||
mov ebx, [buffer_pos]
|
|
||||||
and ebx, 0xFFF
|
and ebx, 0xFFF
|
||||||
mov eax, [buffer_pos]
|
sub eax, ebx
|
||||||
call get_pg_addr ; eax = phys addr
|
mov [cur_antioffset], eax
|
||||||
|
mov eax, [cur_phys_page]
|
||||||
add eax, ebx
|
add eax, ebx
|
||||||
DEBUGF 1, " PHYS. = 0x%x\n", eax
|
mov [cur_phys], eax
|
||||||
DEBUGF 1, " ecx = 0x%x\n", ecx
|
|
||||||
mov ebx, ecx
|
.check_if1:
|
||||||
shl ebx, BSF sizeof.HBA_PRDT_ENTRY
|
mov eax, [vbuf_len]
|
||||||
add ebx, [cmdtable]
|
cmp eax, [cur_antioffset]
|
||||||
add ebx, HBA_CMD_TBL.prdt_entry ; now ebx - address of ecx'th prdt_entry
|
ja .check_if2
|
||||||
mov [ebx + HBA_PRDT_ENTRY.dba], eax
|
|
||||||
mov [ebx + HBA_PRDT_ENTRY.dbau], 0
|
mov eax, [cur_phys]
|
||||||
and [ebx + HBA_PRDT_ENTRY.flags], not 0x3FFFFF ; zero out lower 22 bits, they used for byte count
|
sub eax, [phys_region_start]
|
||||||
mov eax, [buffer_length]
|
add eax, [vbuf_len]
|
||||||
dec eax
|
dec eax
|
||||||
DEBUGF 1, " DBC. = %u\n", eax
|
mov [dbc], eax
|
||||||
or [ebx + HBA_PRDT_ENTRY.flags], eax ; reason why -1 see in spec on this field
|
mov eax, [next_phys_page]
|
||||||
; or [eax + HBA_CMD_TBL.prdt_entry + HBA_PRDT_ENTRY.flags], 1 shl 31 ; enable interrupt on completion
|
mov [new_phys_region_start], eax
|
||||||
|
jmp .add_prd
|
||||||
|
|
||||||
|
.check_if2:
|
||||||
|
mov eax, [cur_phys]
|
||||||
|
add eax, [cur_antioffset]
|
||||||
|
cmp eax, [next_phys_page]
|
||||||
|
je .check_if3
|
||||||
|
|
||||||
|
mov eax, [cur_phys]
|
||||||
|
add eax, [cur_antioffset]
|
||||||
|
sub eax, [phys_region_start]
|
||||||
|
dec eax
|
||||||
|
mov [dbc], eax
|
||||||
|
mov eax, [next_phys_page]
|
||||||
|
mov [new_phys_region_start], eax
|
||||||
|
jmp .add_prd
|
||||||
|
|
||||||
|
.check_if3:
|
||||||
|
mov eax, [cur_phys]
|
||||||
|
add eax, [cur_antioffset]
|
||||||
|
sub eax, [phys_region_start]
|
||||||
|
cmp eax, 4*1024*1024
|
||||||
|
jb .after_ifs
|
||||||
|
|
||||||
|
mov [dbc], 4*1024*1024 - 1
|
||||||
|
mov eax, [phys_region_start]
|
||||||
|
add eax, 4*1024*1024
|
||||||
|
jmp .add_prd
|
||||||
|
|
||||||
|
.after_ifs:
|
||||||
|
jmp .step_next
|
||||||
|
|
||||||
|
.add_prd:
|
||||||
|
mov ebx, [cur_prd]
|
||||||
|
shl ebx, BSF sizeof.HBA_PRDT_ENTRY
|
||||||
|
add ebx, [cmdtable]
|
||||||
|
add ebx, HBA_CMD_TBL.prdt_entry ; now ebx - address of 'th prdt_entry
|
||||||
|
|
||||||
|
DEBUGF AHCI_DBGLVL, "Added PRDT entry: dba = 0x%x, dbc = %u\n", [phys_region_start], [dbc]
|
||||||
|
mov eax, [phys_region_start]
|
||||||
|
mov [ebx + HBA_PRDT_ENTRY.dba], eax
|
||||||
|
mov [ebx + HBA_PRDT_ENTRY.dbau], 0
|
||||||
|
and [ebx + HBA_PRDT_ENTRY.flags], not 0x3FFFFF ; zero out lower 22 bits, they used for byte count
|
||||||
|
mov eax, [dbc]
|
||||||
|
or [ebx + HBA_PRDT_ENTRY.flags], eax
|
||||||
|
|
||||||
|
inc [cur_prd]
|
||||||
|
mov eax, [dbc]
|
||||||
|
inc eax
|
||||||
|
add [prdt_bytes_total], eax
|
||||||
|
mov eax, [new_phys_region_start]
|
||||||
|
mov [phys_region_start], eax
|
||||||
|
cmp [cur_prd], PRDT_MAX_ENTRIES
|
||||||
|
jne @f
|
||||||
|
jmp .fill_prdt_end
|
||||||
|
@@:
|
||||||
|
|
||||||
|
.step_next:
|
||||||
|
mov eax, [vbuf_len]
|
||||||
|
cmp eax, [cur_antioffset]
|
||||||
|
jbe @f
|
||||||
|
mov eax, [cur_antioffset]
|
||||||
|
@@:
|
||||||
|
add [vbuf], eax
|
||||||
|
sub [vbuf_len], eax
|
||||||
|
jmp .fill_prdt
|
||||||
|
|
||||||
|
.fill_prdt_end:
|
||||||
|
|
||||||
|
mov eax, [cmdheader]
|
||||||
|
mov ebx, [cur_prd]
|
||||||
|
DEBUGF AHCI_DBGLVL, " PRDTL = %u\n", ebx
|
||||||
|
mov [eax + HBA_CMD_HDR.prdtl], bx
|
||||||
|
|
||||||
|
mov eax, [prdt_bytes_total]
|
||||||
|
DEBUGF AHCI_DBGLVL, " prdt_bytes_total = %u\n", eax
|
||||||
|
shr eax, 9 ; /= 512
|
||||||
|
mov [numsectors], eax
|
||||||
|
|
||||||
mov eax, [cmdtable]
|
mov eax, [cmdtable]
|
||||||
mov byte [eax + HBA_CMD_TBL.cfis + FIS_REG_H2D.fis_type], FIS_TYPE_REG_H2D
|
mov byte [eax + HBA_CMD_TBL.cfis + FIS_REG_H2D.fis_type], FIS_TYPE_REG_H2D
|
||||||
@ -898,7 +947,10 @@ proc ahci_read stdcall pdata: dword, buffer: dword, startsector: qword, numsecto
|
|||||||
mov byte [eax + HBA_CMD_TBL.cfis + FIS_REG_H2D.flags], bl
|
mov byte [eax + HBA_CMD_TBL.cfis + FIS_REG_H2D.flags], bl
|
||||||
|
|
||||||
mov byte [eax + HBA_CMD_TBL.cfis + FIS_REG_H2D.command], ATA_CMD_READ_DMA_EX
|
mov byte [eax + HBA_CMD_TBL.cfis + FIS_REG_H2D.command], ATA_CMD_READ_DMA_EX
|
||||||
|
cmp [is_write], 1
|
||||||
|
jne @f
|
||||||
|
mov byte [eax + HBA_CMD_TBL.cfis + FIS_REG_H2D.command], ATA_CMD_WRITE_DMA_EX
|
||||||
|
@@:
|
||||||
mov ebx, dword [startsector]
|
mov ebx, dword [startsector]
|
||||||
mov byte [eax + HBA_CMD_TBL.cfis + FIS_REG_H2D.lba0], bl
|
mov byte [eax + HBA_CMD_TBL.cfis + FIS_REG_H2D.lba0], bl
|
||||||
shr ebx, 8
|
shr ebx, 8
|
||||||
@ -927,12 +979,12 @@ proc ahci_read stdcall pdata: dword, buffer: dword, startsector: qword, numsecto
|
|||||||
; Wait for command completion
|
; Wait for command completion
|
||||||
stdcall ahci_port_cmd_wait, edi, eax;, AHCI_PORT_CMD_TIMEOUT
|
stdcall ahci_port_cmd_wait, edi, eax;, AHCI_PORT_CMD_TIMEOUT
|
||||||
|
|
||||||
DEBUGF 1, "sata_error register = 0x%x\n", [edi + HBA_PORT.sata_error]
|
DEBUGF AHCI_DBGLVL, "sata_error register = 0x%x\n", [edi + HBA_PORT.sata_error]
|
||||||
|
|
||||||
DEBUGF 1, "reading completed\n"
|
DEBUGF AHCI_DBGLVL, "reading completed\n"
|
||||||
|
|
||||||
; xor ecx, ecx
|
; xor ecx, ecx
|
||||||
; mov esi, [buffer]
|
; mov esi, [vbuf_orig]
|
||||||
; .print_data:
|
; .print_data:
|
||||||
; cmp ecx, 512
|
; cmp ecx, 512
|
||||||
; jae .end_print_data
|
; jae .end_print_data
|
||||||
@ -947,7 +999,67 @@ proc ahci_read stdcall pdata: dword, buffer: dword, startsector: qword, numsecto
|
|||||||
; .end_print_data:
|
; .end_print_data:
|
||||||
; DEBUGF 1, "\n"
|
; DEBUGF 1, "\n"
|
||||||
|
|
||||||
.ret:
|
popad
|
||||||
|
;mov eax, [cmdheader]
|
||||||
|
;mov eax, [eax + HBA_CMD_HDR.prdbc]
|
||||||
|
mov eax, [numsectors]
|
||||||
|
shl eax, 9 ; *= 512
|
||||||
|
ret
|
||||||
|
|
||||||
|
.fail:
|
||||||
|
popad
|
||||||
|
xor eax, eax
|
||||||
|
ret
|
||||||
|
endp
|
||||||
|
tmpstr rb 16
|
||||||
|
|
||||||
|
; Read sectors
|
||||||
|
; return value: 0 = success, otherwise = error
|
||||||
|
proc ahci_read stdcall pdata: dword, buffer: dword, startsector: qword, numsectors_ptr:dword
|
||||||
|
locals
|
||||||
|
numsectors dd ?
|
||||||
|
endl
|
||||||
|
|
||||||
|
pushad
|
||||||
|
|
||||||
|
mov ecx, ahci_mutex
|
||||||
|
call mutex_lock
|
||||||
|
|
||||||
|
mov eax, [numsectors_ptr]
|
||||||
|
mov eax, [eax]
|
||||||
|
mov [numsectors], eax
|
||||||
|
DEBUGF AHCI_DBGLVL, " ahci_read: buffer = 0x%x, startsector = 0x%x:%x, numsectors = %u\n", [buffer], [startsector], [startsector + 4], eax
|
||||||
|
|
||||||
|
xor ecx, ecx ; how many sectors have been read
|
||||||
|
.read_loop:
|
||||||
|
cmp ecx, [numsectors]
|
||||||
|
jae .read_loop_end
|
||||||
|
|
||||||
|
; mov eax, [buffer]
|
||||||
|
; call get_pg_addr
|
||||||
|
; DEBUGF 1, "buf phys = 0x%x\n", eax
|
||||||
|
; mov eax, [buffer]
|
||||||
|
; add eax, 4096
|
||||||
|
; call get_pg_addr
|
||||||
|
; DEBUGF 1, "buf + 4096 phys = 0x%x\n", eax
|
||||||
|
|
||||||
|
mov ebx, [numsectors]
|
||||||
|
sub ebx, ecx
|
||||||
|
; DEBUGF 1, "buffer = 0x%x\n", [buffer]
|
||||||
|
stdcall ahci_rw_sectors, [pdata], [buffer], dword [startsector], dword [startsector + 4], ebx, 0
|
||||||
|
;; TODO check if eax == 0 ?
|
||||||
|
|
||||||
|
DEBUGF AHCI_DBGLVL, " EAX = 0x%x\n", eax
|
||||||
|
|
||||||
|
add [buffer], eax
|
||||||
|
shr eax, 9 ; /= 512
|
||||||
|
add ecx, eax
|
||||||
|
add dword [startsector], eax
|
||||||
|
adc dword [startsector + 4], 0
|
||||||
|
|
||||||
|
jmp .read_loop
|
||||||
|
.read_loop_end:
|
||||||
|
|
||||||
mov ecx, ahci_mutex
|
mov ecx, ahci_mutex
|
||||||
call mutex_unlock
|
call mutex_unlock
|
||||||
|
|
||||||
@ -955,7 +1067,6 @@ proc ahci_read stdcall pdata: dword, buffer: dword, startsector: qword, numsecto
|
|||||||
xor eax, eax
|
xor eax, eax
|
||||||
ret
|
ret
|
||||||
endp
|
endp
|
||||||
tmpstr rb 16
|
|
||||||
|
|
||||||
; Start command engine
|
; Start command engine
|
||||||
; in: eax - address of HBA_PORT structure
|
; in: eax - address of HBA_PORT structure
|
||||||
@ -1002,7 +1113,7 @@ proc ahci_port_wait stdcall, port: dword, timeout: dword
|
|||||||
jmp .wait
|
jmp .wait
|
||||||
.wait_end:
|
.wait_end:
|
||||||
xor eax, eax
|
xor eax, eax
|
||||||
DEBUGF 1, "port wait counter = %u\n", ecx
|
DEBUGF AHCI_DBGLVL, "port wait counter = %u\n", ecx
|
||||||
cmp ecx, [timeout] ; if they equal it means port is hung
|
cmp ecx, [timeout] ; if they equal it means port is hung
|
||||||
setz al
|
setz al
|
||||||
pop ecx ebx
|
pop ecx ebx
|
||||||
@ -1028,7 +1139,7 @@ proc ahci_port_cmd_wait stdcall, port: dword, cmdslot: dword ;, timeout: dword
|
|||||||
inc ecx
|
inc ecx
|
||||||
jmp .wait
|
jmp .wait
|
||||||
.wait_end:
|
.wait_end:
|
||||||
DEBUGF 1, "port cmd wait counter = %u\n", ecx
|
DEBUGF AHCI_DBGLVL, "port cmd wait counter = %u\n", ecx
|
||||||
bt [ebx + HBA_PORT.interrupt_status], bit_AHCI_HBA_PxIS_TFES ; check for Task File Error
|
bt [ebx + HBA_PORT.interrupt_status], bit_AHCI_HBA_PxIS_TFES ; check for Task File Error
|
||||||
jc .error
|
jc .error
|
||||||
jmp .ret
|
jmp .ret
|
||||||
@ -1118,12 +1229,12 @@ proc ahci_port_rebase stdcall, port: dword, portno: dword, pdata: dword
|
|||||||
mov [edi + PORT_DATA.fb], eax ; set pdata->fb
|
mov [edi + PORT_DATA.fb], eax ; set pdata->fb
|
||||||
stdcall _memset, eax, 0, 256 ; zero out
|
stdcall _memset, eax, 0, 256 ; zero out
|
||||||
|
|
||||||
stdcall alloc_pages, 2
|
stdcall alloc_pages, 32*(64 + 16 + 48 + PRDT_MAX_ENTRIES*16)/4096
|
||||||
mov [phys_page23], eax
|
mov [phys_page23], eax
|
||||||
stdcall map_io_mem, eax, 2*4096, PG_NOCACHE + PG_SWR
|
stdcall map_io_mem, eax, 32*(64 + 16 + 48 + PRDT_MAX_ENTRIES*16), PG_NOCACHE + PG_SWR
|
||||||
mov [virt_page23], eax
|
mov [virt_page23], eax
|
||||||
|
|
||||||
; Command table size = 256*32 = 8K per port
|
; Command table size = N*32 per port
|
||||||
mov edx, [edi + PORT_DATA.clb] ; cmdheader array base
|
mov edx, [edi + PORT_DATA.clb] ; cmdheader array base
|
||||||
xor ecx, ecx
|
xor ecx, ecx
|
||||||
|
|
||||||
@ -1135,29 +1246,31 @@ proc ahci_port_rebase stdcall, port: dword, portno: dword, pdata: dword
|
|||||||
shl ebx, BSF sizeof.HBA_CMD_HDR
|
shl ebx, BSF sizeof.HBA_CMD_HDR
|
||||||
add ebx, edx ; ebx = cmdheader[ecx]
|
add ebx, edx ; ebx = cmdheader[ecx]
|
||||||
|
|
||||||
mov [ebx + HBA_CMD_HDR.prdtl], 8 ; 8 prdt entries per command table
|
mov [ebx + HBA_CMD_HDR.prdtl], PRDT_MAX_ENTRIES ; prdt entries per command table
|
||||||
|
|
||||||
; 256 bytes per command table, 64+16+48+16*8
|
; bytes per command table = 64+16+48+PRDT_MAX_ENTRIES*16 = N
|
||||||
|
|
||||||
push edx
|
push edx
|
||||||
|
|
||||||
; cmdheader[ecx].ctba = phys_page23 + ecx*256
|
; cmdheader[ecx].ctba = phys_page23 + ecx*N
|
||||||
mov [ebx + HBA_CMD_HDR.ctba], ecx
|
mov [ebx + HBA_CMD_HDR.ctba], ecx
|
||||||
shl [ebx + HBA_CMD_HDR.ctba], BSF 256 ; *= 256
|
mov edx, [ebx + HBA_CMD_HDR.ctba]
|
||||||
|
imul edx, (64+16+48+PRDT_MAX_ENTRIES*16) ; *= N
|
||||||
|
mov [ebx + HBA_CMD_HDR.ctba], edx
|
||||||
mov eax, [ebx + HBA_CMD_HDR.ctba]
|
mov eax, [ebx + HBA_CMD_HDR.ctba]
|
||||||
mov edx, [phys_page23]
|
mov edx, [phys_page23]
|
||||||
add [ebx + HBA_CMD_HDR.ctba], edx
|
add [ebx + HBA_CMD_HDR.ctba], edx
|
||||||
|
|
||||||
add eax, [virt_page23]
|
add eax, [virt_page23]
|
||||||
mov [tmp], eax ; tmp = virt_page23 + ecx*256
|
mov [tmp], eax ; tmp = virt_page23 + ecx*N
|
||||||
lea eax, [ecx*4 + edi + PORT_DATA.ctba_arr] ; eax = pdata->ctba_arr[ecx]
|
lea eax, [ecx*4 + edi + PORT_DATA.ctba_arr] ; eax = pdata->ctba_arr[ecx]
|
||||||
mov edx, [tmp]
|
mov edx, [tmp]
|
||||||
mov [eax], edx ; pdata->ctba_arr[ecx] = virt_page23 + ecx*256
|
mov [eax], edx ; pdata->ctba_arr[ecx] = virt_page23 + ecx*N
|
||||||
|
|
||||||
pop edx
|
pop edx
|
||||||
|
|
||||||
mov [ebx + HBA_CMD_HDR.ctbau], 0
|
mov [ebx + HBA_CMD_HDR.ctbau], 0
|
||||||
stdcall _memset, [eax], 0, 256 ; zero out
|
stdcall _memset, [eax], 0, 64+16+48+PRDT_MAX_ENTRIES*16 ; zero out
|
||||||
|
|
||||||
inc ecx
|
inc ecx
|
||||||
jmp .for1
|
jmp .for1
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user