From 7c3c605db6efdf458bb4ee38be12cc25376af2cc Mon Sep 17 00:00:00 2001 From: hidnplayr Date: Thu, 13 Mar 2014 19:16:29 +0000 Subject: [PATCH] disabled superfluous debug output. git-svn-id: svn://kolibrios.org@4642 a494cfbc-eb01-0410-851d-a64ba20cac60 --- drivers/ethernet/rhine.asm | 2162 ++++++++++++++++++------------------ 1 file changed, 1081 insertions(+), 1081 deletions(-) diff --git a/drivers/ethernet/rhine.asm b/drivers/ethernet/rhine.asm index ad23e111df..faffe741ee 100644 --- a/drivers/ethernet/rhine.asm +++ b/drivers/ethernet/rhine.asm @@ -24,32 +24,32 @@ format PE DLL native entry START - CURRENT_API = 0x0200 - COMPATIBLE_API = 0x0100 - API_VERSION = (COMPATIBLE_API shl 16) + CURRENT_API + CURRENT_API = 0x0200 + COMPATIBLE_API = 0x0100 + API_VERSION = (COMPATIBLE_API shl 16) + CURRENT_API - MAX_DEVICES = 16 + MAX_DEVICES = 16 - __DEBUG__ = 1 - __DEBUG_LEVEL__ = 1 ; 1 = all, 2 = errors only + __DEBUG__ = 1 + __DEBUG_LEVEL__ = 2 ; 1 = all, 2 = errors only - TX_RING_SIZE = 4 - RX_RING_SIZE = 4 + TX_RING_SIZE = 4 + RX_RING_SIZE = 4 - ; max time out delay time - W_MAX_TIMEOUT = 0x0FFF + ; max time out delay time + W_MAX_TIMEOUT = 0x0FFF - ; Size of the in-memory receive ring. - RX_BUF_LEN_IDX = 3 ; 0==8K, 1==16K, 2==32K, 3==64K + ; Size of the in-memory receive ring. + RX_BUF_LEN_IDX = 3 ; 0==8K, 1==16K, 2==32K, 3==64K - ; PCI Tuning Parameters - ; Threshold is bytes transferred to chip before transmission starts. - TX_FIFO_THRESH = 256 ; In bytes, rounded down to 32 byte units. + ; PCI Tuning Parameters + ; Threshold is bytes transferred to chip before transmission starts. + TX_FIFO_THRESH = 256 ; In bytes, rounded down to 32 byte units. - ; The following settings are log_2(bytes)-4: 0 == 16 bytes .. 6==1024. - RX_FIFO_THRESH = 4 ; Rx buffer level before first PCI transfer. - RX_DMA_BURST = 4 ; Maximum PCI burst, '4' is 256 bytes - TX_DMA_BURST = 4 + ; The following settings are log_2(bytes)-4: 0 == 16 bytes .. 6==1024. + RX_FIFO_THRESH = 4 ; Rx buffer level before first PCI transfer. + RX_DMA_BURST = 4 ; Maximum PCI burst, '4' is 256 bytes + TX_DMA_BURST = 4 section '.flat' readable writable executable @@ -64,461 +64,461 @@ include '../netdrv_pe.inc' ;************************************************************************** ; VIA Rhine Register Definitions ;************************************************************************** -byPAR0 = 0x00 -byRCR = 0x06 -byTCR = 0x07 -byCR0 = 0x08 -byCR1 = 0x09 -byISR0 = 0x0c -byISR1 = 0x0d -byIMR0 = 0x0e -byIMR1 = 0x0f -byMAR0 = 0x10 -byMAR1 = 0x11 -byMAR2 = 0x12 -byMAR3 = 0x13 -byMAR4 = 0x14 -byMAR5 = 0x15 -byMAR6 = 0x16 -byMAR7 = 0x17 -dwCurrentRxDescAddr = 0x18 -dwCurrentTxDescAddr = 0x1c -dwCurrentRDSE0 = 0x20 -dwCurrentRDSE1 = 0x24 -dwCurrentRDSE2 = 0x28 -dwCurrentRDSE3 = 0x2c -dwNextRDSE0 = 0x30 -dwNextRDSE1 = 0x34 -dwNextRDSE2 = 0x38 -dwNextRDSE3 = 0x3c -dwCurrentTDSE0 = 0x40 -dwCurrentTDSE1 = 0x44 -dwCurrentTDSE2 = 0x48 -dwCurrentTDSE3 = 0x4c -dwNextTDSE0 = 0x50 -dwNextTDSE1 = 0x54 -dwNextTDSE2 = 0x58 -dwNextTDSE3 = 0x5c -dwCurrRxDMAPtr = 0x60 -dwCurrTxDMAPtr = 0x64 -byMPHY = 0x6c -byMIISR = 0x6d -byBCR0 = 0x6e -byBCR1 = 0x6f -byMIICR = 0x70 -byMIIAD = 0x71 -wMIIDATA = 0x72 -byEECSR = 0x74 -byTEST = 0x75 -byGPIO = 0x76 -byCFGA = 0x78 -byCFGB = 0x79 -byCFGC = 0x7a -byCFGD = 0x7b -wTallyCntMPA = 0x7c -wTallyCntCRC = 0x7d -bySTICKHW = 0x83 -byWOLcrClr = 0xA4 -byWOLcgClr = 0xA7 -byPwrcsrClr = 0xAC +byPAR0 = 0x00 +byRCR = 0x06 +byTCR = 0x07 +byCR0 = 0x08 +byCR1 = 0x09 +byISR0 = 0x0c +byISR1 = 0x0d +byIMR0 = 0x0e +byIMR1 = 0x0f +byMAR0 = 0x10 +byMAR1 = 0x11 +byMAR2 = 0x12 +byMAR3 = 0x13 +byMAR4 = 0x14 +byMAR5 = 0x15 +byMAR6 = 0x16 +byMAR7 = 0x17 +dwCurrentRxDescAddr = 0x18 +dwCurrentTxDescAddr = 0x1c +dwCurrentRDSE0 = 0x20 +dwCurrentRDSE1 = 0x24 +dwCurrentRDSE2 = 0x28 +dwCurrentRDSE3 = 0x2c +dwNextRDSE0 = 0x30 +dwNextRDSE1 = 0x34 +dwNextRDSE2 = 0x38 +dwNextRDSE3 = 0x3c +dwCurrentTDSE0 = 0x40 +dwCurrentTDSE1 = 0x44 +dwCurrentTDSE2 = 0x48 +dwCurrentTDSE3 = 0x4c +dwNextTDSE0 = 0x50 +dwNextTDSE1 = 0x54 +dwNextTDSE2 = 0x58 +dwNextTDSE3 = 0x5c +dwCurrRxDMAPtr = 0x60 +dwCurrTxDMAPtr = 0x64 +byMPHY = 0x6c +byMIISR = 0x6d +byBCR0 = 0x6e +byBCR1 = 0x6f +byMIICR = 0x70 +byMIIAD = 0x71 +wMIIDATA = 0x72 +byEECSR = 0x74 +byTEST = 0x75 +byGPIO = 0x76 +byCFGA = 0x78 +byCFGB = 0x79 +byCFGC = 0x7a +byCFGD = 0x7b +wTallyCntMPA = 0x7c +wTallyCntCRC = 0x7d +bySTICKHW = 0x83 +byWOLcrClr = 0xA4 +byWOLcgClr = 0xA7 +byPwrcsrClr = 0xAC ;--------------------- Exioaddr Definitions ------------------------- ; Bits in the RCR register -RCR_RRFT2 = 0x80 -RCR_RRFT1 = 0x40 -RCR_RRFT0 = 0x20 -RCR_PROM = 0x10 -RCR_AB = 0x08 -RCR_AM = 0x04 -RCR_AR = 0x02 -RCR_SEP = 0x01 +RCR_RRFT2 = 0x80 +RCR_RRFT1 = 0x40 +RCR_RRFT0 = 0x20 +RCR_PROM = 0x10 +RCR_AB = 0x08 +RCR_AM = 0x04 +RCR_AR = 0x02 +RCR_SEP = 0x01 ; Bits in the TCR register -TCR_RTSF = 0x80 -TCR_RTFT1 = 0x40 -TCR_RTFT0 = 0x20 -TCR_OFSET = 0x08 -TCR_LB1 = 0x04 ; loopback[1] -TCR_LB0 = 0x02 ; loopback[0] +TCR_RTSF = 0x80 +TCR_RTFT1 = 0x40 +TCR_RTFT0 = 0x20 +TCR_OFSET = 0x08 +TCR_LB1 = 0x04 ; loopback[1] +TCR_LB0 = 0x02 ; loopback[0] ; Bits in the CR0 register -CR0_RDMD = 0x40 ; rx descriptor polling demand -CR0_TDMD = 0x20 ; tx descriptor polling demand -CR0_TXON = 0x10 -CR0_RXON = 0x08 -CR0_STOP = 0x04 ; stop NIC, default = 1 -CR0_STRT = 0x02 ; start NIC -CR0_INIT = 0x01 ; start init process +CR0_RDMD = 0x40 ; rx descriptor polling demand +CR0_TDMD = 0x20 ; tx descriptor polling demand +CR0_TXON = 0x10 +CR0_RXON = 0x08 +CR0_STOP = 0x04 ; stop NIC, default = 1 +CR0_STRT = 0x02 ; start NIC +CR0_INIT = 0x01 ; start init process ; Bits in the CR1 register -CR1_SFRST = 0x80 ; software reset -CR1_RDMD1 = 0x40 ; RDMD1 -CR1_TDMD1 = 0x20 ; TDMD1 -CR1_KEYPAG = 0x10 ; turn on par/key -CR1_DPOLL = 0x08 ; disable rx/tx auto polling -CR1_FDX = 0x04 ; full duplex mode -CR1_ETEN = 0x02 ; early tx mode -CR1_EREN = 0x01 ; early rx mode +CR1_SFRST = 0x80 ; software reset +CR1_RDMD1 = 0x40 ; RDMD1 +CR1_TDMD1 = 0x20 ; TDMD1 +CR1_KEYPAG = 0x10 ; turn on par/key +CR1_DPOLL = 0x08 ; disable rx/tx auto polling +CR1_FDX = 0x04 ; full duplex mode +CR1_ETEN = 0x02 ; early tx mode +CR1_EREN = 0x01 ; early rx mode ; Bits in the CR register -CR_RDMD = 0x0040 ; rx descriptor polling demand -CR_TDMD = 0x0020 ; tx descriptor polling demand -CR_TXON = 0x0010 -CR_RXON = 0x0008 -CR_STOP = 0x0004 ; stop NIC, default = 1 -CR_STRT = 0x0002 ; start NIC -CR_INIT = 0x0001 ; start init process -CR_SFRST = 0x8000 ; software reset -CR_RDMD1 = 0x4000 ; RDMD1 -CR_TDMD1 = 0x2000 ; TDMD1 -CR_KEYPAG = 0x1000 ; turn on par/key -CR_DPOLL = 0x0800 ; disable rx/tx auto polling -CR_FDX = 0x0400 ; full duplex mode -CR_ETEN = 0x0200 ; early tx mode -CR_EREN = 0x0100 ; early rx mode +CR_RDMD = 0x0040 ; rx descriptor polling demand +CR_TDMD = 0x0020 ; tx descriptor polling demand +CR_TXON = 0x0010 +CR_RXON = 0x0008 +CR_STOP = 0x0004 ; stop NIC, default = 1 +CR_STRT = 0x0002 ; start NIC +CR_INIT = 0x0001 ; start init process +CR_SFRST = 0x8000 ; software reset +CR_RDMD1 = 0x4000 ; RDMD1 +CR_TDMD1 = 0x2000 ; TDMD1 +CR_KEYPAG = 0x1000 ; turn on par/key +CR_DPOLL = 0x0800 ; disable rx/tx auto polling +CR_FDX = 0x0400 ; full duplex mode +CR_ETEN = 0x0200 ; early tx mode +CR_EREN = 0x0100 ; early rx mode ; Bits in the IMR0 register -IMR0_CNTM = 0x80 -IMR0_BEM = 0x40 -IMR0_RUM = 0x20 -IMR0_TUM = 0x10 -IMR0_TXEM = 0x08 -IMR0_RXEM = 0x04 -IMR0_PTXM = 0x02 -IMR0_PRXM = 0x01 +IMR0_CNTM = 0x80 +IMR0_BEM = 0x40 +IMR0_RUM = 0x20 +IMR0_TUM = 0x10 +IMR0_TXEM = 0x08 +IMR0_RXEM = 0x04 +IMR0_PTXM = 0x02 +IMR0_PRXM = 0x01 ; define imrshadow -IMRShadow = 0x5AFF +IMRShadow = 0x5AFF ; Bits in the IMR1 register -IMR1_INITM = 0x80 -IMR1_SRCM = 0x40 -IMR1_NBFM = 0x10 -IMR1_PRAIM = 0x08 -IMR1_RES0M = 0x04 -IMR1_ETM = 0x02 -IMR1_ERM = 0x01 +IMR1_INITM = 0x80 +IMR1_SRCM = 0x40 +IMR1_NBFM = 0x10 +IMR1_PRAIM = 0x08 +IMR1_RES0M = 0x04 +IMR1_ETM = 0x02 +IMR1_ERM = 0x01 ; Bits in the ISR register -ISR_INITI = 0x8000 -ISR_SRCI = 0x4000 -ISR_ABTI = 0x2000 -ISR_NORBF = 0x1000 -ISR_PKTRA = 0x0800 -ISR_RES0 = 0x0400 -ISR_ETI = 0x0200 -ISR_ERI = 0x0100 -ISR_CNT = 0x0080 -ISR_BE = 0x0040 -ISR_RU = 0x0020 -ISR_TU = 0x0010 -ISR_TXE = 0x0008 -ISR_RXE = 0x0004 -ISR_PTX = 0x0002 -ISR_PRX = 0x0001 +ISR_INITI = 0x8000 +ISR_SRCI = 0x4000 +ISR_ABTI = 0x2000 +ISR_NORBF = 0x1000 +ISR_PKTRA = 0x0800 +ISR_RES0 = 0x0400 +ISR_ETI = 0x0200 +ISR_ERI = 0x0100 +ISR_CNT = 0x0080 +ISR_BE = 0x0040 +ISR_RU = 0x0020 +ISR_TU = 0x0010 +ISR_TXE = 0x0008 +ISR_RXE = 0x0004 +ISR_PTX = 0x0002 +ISR_PRX = 0x0001 ; Bits in the ISR0 register -ISR0_CNT = 0x80 -ISR0_BE = 0x40 -ISR0_RU = 0x20 -ISR0_TU = 0x10 -ISR0_TXE = 0x08 -ISR0_RXE = 0x04 -ISR0_PTX = 0x02 -ISR0_PRX = 0x01 +ISR0_CNT = 0x80 +ISR0_BE = 0x40 +ISR0_RU = 0x20 +ISR0_TU = 0x10 +ISR0_TXE = 0x08 +ISR0_RXE = 0x04 +ISR0_PTX = 0x02 +ISR0_PRX = 0x01 ; Bits in the ISR1 register -ISR1_INITI = 0x80 -ISR1_SRCI = 0x40 -ISR1_NORBF = 0x10 -ISR1_PKTRA = 0x08 -ISR1_ETI = 0x02 -ISR1_ERI = 0x01 +ISR1_INITI = 0x80 +ISR1_SRCI = 0x40 +ISR1_NORBF = 0x10 +ISR1_PKTRA = 0x08 +ISR1_ETI = 0x02 +ISR1_ERI = 0x01 ; ISR ABNORMAL CONDITION -ISR_ABNORMAL = ISR_BE+ISR_RU+ISR_TU+ISR_CNT+ISR_NORBF+ISR_PKTRA +ISR_ABNORMAL = ISR_BE+ISR_RU+ISR_TU+ISR_CNT+ISR_NORBF+ISR_PKTRA ; Bits in the MIISR register -MIISR_MIIERR = 0x08 -MIISR_MRERR = 0x04 -MIISR_LNKFL = 0x02 -MIISR_SPEED = 0x01 +MIISR_MIIERR = 0x08 +MIISR_MRERR = 0x04 +MIISR_LNKFL = 0x02 +MIISR_SPEED = 0x01 ; Bits in the MIICR register -MIICR_MAUTO = 0x80 -MIICR_RCMD = 0x40 -MIICR_WCMD = 0x20 -MIICR_MDPM = 0x10 -MIICR_MOUT = 0x08 -MIICR_MDO = 0x04 -MIICR_MDI = 0x02 -MIICR_MDC = 0x01 +MIICR_MAUTO = 0x80 +MIICR_RCMD = 0x40 +MIICR_WCMD = 0x20 +MIICR_MDPM = 0x10 +MIICR_MOUT = 0x08 +MIICR_MDO = 0x04 +MIICR_MDI = 0x02 +MIICR_MDC = 0x01 ; Bits in the EECSR register -EECSR_EEPR = 0x80 ; eeprom programmed status, 73h means programmed -EECSR_EMBP = 0x40 ; eeprom embedded programming -EECSR_AUTOLD = 0x20 ; eeprom content reload -EECSR_DPM = 0x10 ; eeprom direct programming -EECSR_CS = 0x08 ; eeprom CS pin -EECSR_SK = 0x04 ; eeprom SK pin -EECSR_DI = 0x02 ; eeprom DI pin -EECSR_DO = 0x01 ; eeprom DO pin +EECSR_EEPR = 0x80 ; eeprom programmed status, 73h means programmed +EECSR_EMBP = 0x40 ; eeprom embedded programming +EECSR_AUTOLD = 0x20 ; eeprom content reload +EECSR_DPM = 0x10 ; eeprom direct programming +EECSR_CS = 0x08 ; eeprom CS pin +EECSR_SK = 0x04 ; eeprom SK pin +EECSR_DI = 0x02 ; eeprom DI pin +EECSR_DO = 0x01 ; eeprom DO pin ; Bits in the BCR0 register -BCR0_CRFT2 = 0x20 -BCR0_CRFT1 = 0x10 -BCR0_CRFT0 = 0x08 -BCR0_DMAL2 = 0x04 -BCR0_DMAL1 = 0x02 -BCR0_DMAL0 = 0x01 +BCR0_CRFT2 = 0x20 +BCR0_CRFT1 = 0x10 +BCR0_CRFT0 = 0x08 +BCR0_DMAL2 = 0x04 +BCR0_DMAL1 = 0x02 +BCR0_DMAL0 = 0x01 ; Bits in the BCR1 register -BCR1_CTSF = 0x20 -BCR1_CTFT1 = 0x10 -BCR1_CTFT0 = 0x08 -BCR1_POT2 = 0x04 -BCR1_POT1 = 0x02 -BCR1_POT0 = 0x01 +BCR1_CTSF = 0x20 +BCR1_CTFT1 = 0x10 +BCR1_CTFT0 = 0x08 +BCR1_POT2 = 0x04 +BCR1_POT1 = 0x02 +BCR1_POT0 = 0x01 ; Bits in the CFGA register -CFGA_EELOAD = 0x80 ; enable eeprom embedded and direct programming -CFGA_JUMPER = 0x40 -CFGA_MTGPIO = 0x08 -CFGA_T10EN = 0x02 -CFGA_AUTO = 0x01 +CFGA_EELOAD = 0x80 ; enable eeprom embedded and direct programming +CFGA_JUMPER = 0x40 +CFGA_MTGPIO = 0x08 +CFGA_T10EN = 0x02 +CFGA_AUTO = 0x01 ; Bits in the CFGB register -CFGB_PD = 0x80 -CFGB_POLEN = 0x02 -CFGB_LNKEN = 0x01 +CFGB_PD = 0x80 +CFGB_POLEN = 0x02 +CFGB_LNKEN = 0x01 ; Bits in the CFGC register -CFGC_M10TIO = 0x80 -CFGC_M10POL = 0x40 -CFGC_PHY1 = 0x20 -CFGC_PHY0 = 0x10 -CFGC_BTSEL = 0x08 -CFGC_BPS2 = 0x04 ; bootrom select[2] -CFGC_BPS1 = 0x02 ; bootrom select[1] -CFGC_BPS0 = 0x01 ; bootrom select[0] +CFGC_M10TIO = 0x80 +CFGC_M10POL = 0x40 +CFGC_PHY1 = 0x20 +CFGC_PHY0 = 0x10 +CFGC_BTSEL = 0x08 +CFGC_BPS2 = 0x04 ; bootrom select[2] +CFGC_BPS1 = 0x02 ; bootrom select[1] +CFGC_BPS0 = 0x01 ; bootrom select[0] ; Bits in the CFGD register -CFGD_GPIOEN = 0x80 -CFGD_DIAG = 0x40 -CFGD_MAGIC = 0x10 -CFGD_RANDOM = 0x08 -CFGD_CFDX = 0x04 -CFGD_CEREN = 0x02 -CFGD_CETEN = 0x01 +CFGD_GPIOEN = 0x80 +CFGD_DIAG = 0x40 +CFGD_MAGIC = 0x10 +CFGD_RANDOM = 0x08 +CFGD_CFDX = 0x04 +CFGD_CEREN = 0x02 +CFGD_CETEN = 0x01 ; Bits in RSR -RSR_RERR = 0x00000001 -RSR_CRC = 0x00000002 -RSR_FAE = 0x00000004 -RSR_FOV = 0x00000008 -RSR_LONG = 0x00000010 -RSR_RUNT = 0x00000020 -RSR_SERR = 0x00000040 -RSR_BUFF = 0x00000080 -RSR_EDP = 0x00000100 -RSR_STP = 0x00000200 -RSR_CHN = 0x00000400 -RSR_PHY = 0x00000800 -RSR_BAR = 0x00001000 -RSR_MAR = 0x00002000 -RSR_RXOK = 0x00008000 -RSR_ABNORMAL = RSR_RERR+RSR_LONG+RSR_RUNT +RSR_RERR = 0x00000001 +RSR_CRC = 0x00000002 +RSR_FAE = 0x00000004 +RSR_FOV = 0x00000008 +RSR_LONG = 0x00000010 +RSR_RUNT = 0x00000020 +RSR_SERR = 0x00000040 +RSR_BUFF = 0x00000080 +RSR_EDP = 0x00000100 +RSR_STP = 0x00000200 +RSR_CHN = 0x00000400 +RSR_PHY = 0x00000800 +RSR_BAR = 0x00001000 +RSR_MAR = 0x00002000 +RSR_RXOK = 0x00008000 +RSR_ABNORMAL = RSR_RERR+RSR_LONG+RSR_RUNT ; Bits in TSR -TSR_NCR0 = 0x00000001 -TSR_NCR1 = 0x00000002 -TSR_NCR2 = 0x00000004 -TSR_NCR3 = 0x00000008 -TSR_COLS = 0x00000010 -TSR_CDH = 0x00000080 -TSR_ABT = 0x00000100 -TSR_OWC = 0x00000200 -TSR_CRS = 0x00000400 -TSR_UDF = 0x00000800 -TSR_TBUFF = 0x00001000 -TSR_SERR = 0x00002000 -TSR_JAB = 0x00004000 -TSR_TERR = 0x00008000 -TSR_ABNORMAL = TSR_TERR+TSR_OWC+TSR_ABT+TSR_JAB+TSR_CRS -TSR_OWN_BIT = 0x80000000 +TSR_NCR0 = 0x00000001 +TSR_NCR1 = 0x00000002 +TSR_NCR2 = 0x00000004 +TSR_NCR3 = 0x00000008 +TSR_COLS = 0x00000010 +TSR_CDH = 0x00000080 +TSR_ABT = 0x00000100 +TSR_OWC = 0x00000200 +TSR_CRS = 0x00000400 +TSR_UDF = 0x00000800 +TSR_TBUFF = 0x00001000 +TSR_SERR = 0x00002000 +TSR_JAB = 0x00004000 +TSR_TERR = 0x00008000 +TSR_ABNORMAL = TSR_TERR+TSR_OWC+TSR_ABT+TSR_JAB+TSR_CRS +TSR_OWN_BIT = 0x80000000 -CB_DELAY_LOOP_WAIT = 10 ; 10ms +CB_DELAY_LOOP_WAIT = 10 ; 10ms ; enabled mask value of irq -W_IMR_MASK_VALUE = 0x1BFF ; initial value of IMR +W_IMR_MASK_VALUE = 0x1BFF ; initial value of IMR ; Ethernet address filter type -PKT_TYPE_DIRECTED = 0x0001 ; obsolete, directed address is always accepted -PKT_TYPE_MULTICAST = 0x0002 -PKT_TYPE_ALL_MULTICAST = 0x0004 -PKT_TYPE_BROADCAST = 0x0008 -PKT_TYPE_PROMISCUOUS = 0x0020 -PKT_TYPE_LONG = 0x2000 -PKT_TYPE_RUNT = 0x4000 -PKT_TYPE_ERROR = 0x8000 ; accept error packets, e.g. CRC error +PKT_TYPE_DIRECTED = 0x0001 ; obsolete, directed address is always accepted +PKT_TYPE_MULTICAST = 0x0002 +PKT_TYPE_ALL_MULTICAST = 0x0004 +PKT_TYPE_BROADCAST = 0x0008 +PKT_TYPE_PROMISCUOUS = 0x0020 +PKT_TYPE_LONG = 0x2000 +PKT_TYPE_RUNT = 0x4000 +PKT_TYPE_ERROR = 0x8000 ; accept error packets, e.g. CRC error ; Loopback mode -NIC_LB_NONE = 0x00 -NIC_LB_INTERNAL = 0x01 -NIC_LB_PHY = 0x02 ; MII or Internal-10BaseT loopback +NIC_LB_NONE = 0x00 +NIC_LB_INTERNAL = 0x01 +NIC_LB_PHY = 0x02 ; MII or Internal-10BaseT loopback -PKT_BUF_SZ = 1536 ; Size of each temporary Rx buffer. +PKT_BUF_SZ = 1536 ; Size of each temporary Rx buffer. -PCI_REG_MODE3 = 0x53 -MODE3_MIION = 0x04 ; in PCI_REG_MOD3 OF PCI space +PCI_REG_MODE3 = 0x53 +MODE3_MIION = 0x04 ; in PCI_REG_MOD3 OF PCI space ; VIA Rhine revisions -VT86C100A = 0x00 -VTunknown0 = 0x20 -VT6102 = 0x40 -VT8231 = 0x50 ; Integrated MAC -VT8233 = 0x60 ; Integrated MAC -VT8235 = 0x74 ; Integrated MAC -VT8237 = 0x78 ; Integrated MAC -VTunknown1 = 0x7C -VT6105 = 0x80 -VT6105_B0 = 0x83 -VT6105L = 0x8A -VT6107 = 0x8C -VTunknown2 = 0x8E -VT6105M = 0x90 +VT86C100A = 0x00 +VTunknown0 = 0x20 +VT6102 = 0x40 +VT8231 = 0x50 ; Integrated MAC +VT8233 = 0x60 ; Integrated MAC +VT8235 = 0x74 ; Integrated MAC +VT8237 = 0x78 ; Integrated MAC +VTunknown1 = 0x7C +VT6105 = 0x80 +VT6105_B0 = 0x83 +VT6105L = 0x8A +VT6107 = 0x8C +VTunknown2 = 0x8E +VT6105M = 0x90 ; Rx status bits -RX_SBITS_RERR = 1 shl 0 -RX_SBITS_CRC_ERROR = 1 shl 1 -RX_SBITS_FAE = 1 shl 2 -RX_SBITS_FOV = 1 shl 3 -RX_SBITS_TOOLONG = 1 shl 4 -RX_SBITS_RUNT = 1 shl 5 -RX_SBITS_SERR = 1 shl 6 -RX_SBITS_BUFF = 1 shl 7 -RX_SBITS_EDP = 1 shl 8 -RX_SBITS_STP = 1 shl 9 -RX_SBITS_CHN = 1 shl 10 -RX_SBITS_PHY = 1 shl 11 -RX_SBITS_BAR = 1 shl 12 -RX_SBITS_MAR = 1 shl 13 -RX_SBITS_RESERVED_1 = 1 shl 14 -RX_SBITS_RXOK = 1 shl 15 -RX_SBITS_FRAME_LENGTH = 0x7FF shl 16 -RX_SBITS_RESERVED_2 = 0xF shl 27 -RX_SBITS_OWN_BIT = 1 shl 31 +RX_SBITS_RERR = 1 shl 0 +RX_SBITS_CRC_ERROR = 1 shl 1 +RX_SBITS_FAE = 1 shl 2 +RX_SBITS_FOV = 1 shl 3 +RX_SBITS_TOOLONG = 1 shl 4 +RX_SBITS_RUNT = 1 shl 5 +RX_SBITS_SERR = 1 shl 6 +RX_SBITS_BUFF = 1 shl 7 +RX_SBITS_EDP = 1 shl 8 +RX_SBITS_STP = 1 shl 9 +RX_SBITS_CHN = 1 shl 10 +RX_SBITS_PHY = 1 shl 11 +RX_SBITS_BAR = 1 shl 12 +RX_SBITS_MAR = 1 shl 13 +RX_SBITS_RESERVED_1 = 1 shl 14 +RX_SBITS_RXOK = 1 shl 15 +RX_SBITS_FRAME_LENGTH = 0x7FF shl 16 +RX_SBITS_RESERVED_2 = 0xF shl 27 +RX_SBITS_OWN_BIT = 1 shl 31 ; Rx control bits -RX_CBITS_RX_BUF_SIZE = 0x7FF -RX_CBITS_EXTEND_RX_BUF_SIZE = 0xF shl 11 -RX_CBITS_RESERVED_1 = 0x1FFFF shl 15 +RX_CBITS_RX_BUF_SIZE = 0x7FF +RX_CBITS_EXTEND_RX_BUF_SIZE = 0xF shl 11 +RX_CBITS_RESERVED_1 = 0x1FFFF shl 15 ; Tx status bits -TX_SBITS_NCR0 = 1 shl 0 -TX_SBITS_NCR1 = 1 shl 1 -TX_SBITS_NCR2 = 1 shl 2 -TX_SBITS_NCR3 = 1 shl 3 -TX_SBITS_COLS = 1 shl 4 -TX_SBITS_RESERVED_1 = 1 shl 5 -TX_SBITS_CDH = 1 shl 7 -TX_SBITS_ABT = 1 shl 8 -TX_SBITS_OWC = 1 shl 9 -TX_SBITS_CRS = 1 shl 10 -TX_SBITS_UDF = 1 shl 11 -TX_SBITS_TBUFF = 1 shl 12 -TX_SBITS_SERR = 1 shl 13 -TX_SBITS_JAB = 1 shl 14 -TX_SBITS_TERR = 1 shl 15 -TX_SBITS_RESERVED_2 = 0x7FFF shl 16 -TX_SBITS_OWN_BIT = 1 shl 31 +TX_SBITS_NCR0 = 1 shl 0 +TX_SBITS_NCR1 = 1 shl 1 +TX_SBITS_NCR2 = 1 shl 2 +TX_SBITS_NCR3 = 1 shl 3 +TX_SBITS_COLS = 1 shl 4 +TX_SBITS_RESERVED_1 = 1 shl 5 +TX_SBITS_CDH = 1 shl 7 +TX_SBITS_ABT = 1 shl 8 +TX_SBITS_OWC = 1 shl 9 +TX_SBITS_CRS = 1 shl 10 +TX_SBITS_UDF = 1 shl 11 +TX_SBITS_TBUFF = 1 shl 12 +TX_SBITS_SERR = 1 shl 13 +TX_SBITS_JAB = 1 shl 14 +TX_SBITS_TERR = 1 shl 15 +TX_SBITS_RESERVED_2 = 0x7FFF shl 16 +TX_SBITS_OWN_BIT = 1 shl 31 ; Tx control bits -TX_CBITS_TX_BUF_SIZE = 0x7FF -TX_CBITS_EXTEND_TX_BUF_SIZE = 0xF shl 11 -TX_CBITS_CHN = 1 shl 15 -TX_CBITS_CRC = 1 shl 16 -TX_CBITS_RESERVED_1 = 0xF shl 17 -TX_CBITS_STP = 1 shl 21 -TX_CBITS_EDP = 1 shl 22 -TX_CBITS_IC = 1 shl 23 -TX_CBITS_RESERVED_2 = 0xFF shl 24 +TX_CBITS_TX_BUF_SIZE = 0x7FF +TX_CBITS_EXTEND_TX_BUF_SIZE = 0xF shl 11 +TX_CBITS_CHN = 1 shl 15 +TX_CBITS_CRC = 1 shl 16 +TX_CBITS_RESERVED_1 = 0xF shl 17 +TX_CBITS_STP = 1 shl 21 +TX_CBITS_EDP = 1 shl 22 +TX_CBITS_IC = 1 shl 23 +TX_CBITS_RESERVED_2 = 0xFF shl 24 ; Offsets to the device registers. - StationAddr = 0x00 - RxConfig = 0x06 - TxConfig = 0x07 - ChipCmd = 0x08 - IntrStatus = 0x0C - IntrEnable = 0x0E - MulticastFilter0 = 0x10 - MulticastFilter1 = 0x14 - RxRingPtr = 0x18 - TxRingPtr = 0x1C - GFIFOTest = 0x54 - MIIPhyAddr = 0x6C - MIIStatus = 0x6D - PCIBusConfig = 0x6E - MIICmd = 0x70 - MIIRegAddr = 0x71 - MIIData = 0x72 - MACRegEEcsr = 0x74 - ConfigA = 0x78 - ConfigB = 0x79 - ConfigC = 0x7A - ConfigD = 0x7B - RxMissed = 0x7C - RxCRCErrs = 0x7E - MiscCmd = 0x81 - StickyHW = 0x83 - IntrStatus2 = 0x84 - WOLcrClr = 0xA4 - WOLcgClr = 0xA7 - PwrcsrClr = 0xAC + StationAddr = 0x00 + RxConfig = 0x06 + TxConfig = 0x07 + ChipCmd = 0x08 + IntrStatus = 0x0C + IntrEnable = 0x0E + MulticastFilter0 = 0x10 + MulticastFilter1 = 0x14 + RxRingPtr = 0x18 + TxRingPtr = 0x1C + GFIFOTest = 0x54 + MIIPhyAddr = 0x6C + MIIStatus = 0x6D + PCIBusConfig = 0x6E + MIICmd = 0x70 + MIIRegAddr = 0x71 + MIIData = 0x72 + MACRegEEcsr = 0x74 + ConfigA = 0x78 + ConfigB = 0x79 + ConfigC = 0x7A + ConfigD = 0x7B + RxMissed = 0x7C + RxCRCErrs = 0x7E + MiscCmd = 0x81 + StickyHW = 0x83 + IntrStatus2 = 0x84 + WOLcrClr = 0xA4 + WOLcgClr = 0xA7 + PwrcsrClr = 0xAC ; Bits in the interrupt status/mask registers. - IntrRxDone = 0x0001 - IntrRxErr = 0x0004 - IntrRxEmpty = 0x0020 - IntrTxDone = 0x0002 - IntrTxError = 0x0008 - IntrTxUnderrun = 0x0010 - IntrPCIErr = 0x0040 - IntrStatsMax = 0x0080 - IntrRxEarly = 0x0100 - IntrRxOverflow = 0x0400 - IntrRxDropped = 0x0800 - IntrRxNoBuf = 0x1000 - IntrTxAborted = 0x2000 - IntrLinkChange = 0x4000 - IntrRxWakeUp = 0x8000 - IntrNormalSummary = 0x0003 - IntrAbnormalSummary = 0xC260 - IntrTxDescRace = 0x080000 ; mapped from IntrStatus2 - IntrTxErrSummary = 0x082218 + IntrRxDone = 0x0001 + IntrRxErr = 0x0004 + IntrRxEmpty = 0x0020 + IntrTxDone = 0x0002 + IntrTxError = 0x0008 + IntrTxUnderrun = 0x0010 + IntrPCIErr = 0x0040 + IntrStatsMax = 0x0080 + IntrRxEarly = 0x0100 + IntrRxOverflow = 0x0400 + IntrRxDropped = 0x0800 + IntrRxNoBuf = 0x1000 + IntrTxAborted = 0x2000 + IntrLinkChange = 0x4000 + IntrRxWakeUp = 0x8000 + IntrNormalSummary = 0x0003 + IntrAbnormalSummary = 0xC260 + IntrTxDescRace = 0x080000 ; mapped from IntrStatus2 + IntrTxErrSummary = 0x082218 - DEFAULT_INTR = (IntrRxDone or IntrRxErr or IntrRxEmpty or IntrRxOverflow or IntrRxDropped or IntrRxNoBuf) - RX_BUF_LEN = (8192 shl RX_BUF_LEN_IDX) + DEFAULT_INTR = (IntrRxDone or IntrRxErr or IntrRxEmpty or IntrRxOverflow or IntrRxDropped or IntrRxNoBuf) + RX_BUF_LEN = (8192 shl RX_BUF_LEN_IDX) -struct rx_head - status dd ? - control dd ? - buff_addr dd ? ; address - next_desc dd ? ; +struct rx_head + status dd ? + control dd ? + buff_addr dd ? ; address + next_desc dd ? ; - buff_addr_virt dd ? - rd 3 ; alignment + buff_addr_virt dd ? + rd 3 ; alignment ends -struct tx_head - status dd ? - control dd ? - buff_addr dd ? ; address - next_desc dd ? ; +struct tx_head + status dd ? + control dd ? + buff_addr dd ? ; address + next_desc dd ? ; - buff_addr_virt dd ? - rd 3 ; alignment + buff_addr_virt dd ? + rd 3 ; alignment ends -struct device ETH_DEVICE +struct device ETH_DEVICE - io_addr dd ? - pci_dev dd ? - pci_bus dd ? - revision db ? - irq_line db ? - chip_id dw ? + io_addr dd ? + pci_dev dd ? + pci_bus dd ? + revision db ? + irq_line db ? + chip_id dw ? - cur_rx dw ? - cur_tx dw ? - last_tx dw ? + cur_rx dw ? + cur_tx dw ? + last_tx dw ? - rb 0x100 - ($ and 0xff) ; align 256 - tx_ring rb sizeof.tx_head*TX_RING_SIZE + rb 0x100 - ($ and 0xff) ; align 256 + tx_ring rb sizeof.tx_head*TX_RING_SIZE - rb 0x100 - ($ and 0xff) ; align 256 - rx_ring rb sizeof.rx_head*RX_RING_SIZE + rb 0x100 - ($ and 0xff) ; align 256 + rx_ring rb sizeof.rx_head*RX_RING_SIZE ends @@ -532,16 +532,16 @@ ends proc START c, reason:dword, cmdline:dword - cmp [reason], DRV_ENTRY - jne .fail + cmp [reason], DRV_ENTRY + jne .fail - DEBUGF 1,"Loading driver\n" - invoke RegService, my_service, service_proc - ret + DEBUGF 1,"Loading driver\n" + invoke RegService, my_service, service_proc + ret .fail: - xor eax, eax - ret + xor eax, eax + ret endp @@ -555,127 +555,127 @@ endp proc service_proc stdcall, ioctl:dword - mov edx, [ioctl] - mov eax, [edx + IOCTL.io_code] + mov edx, [ioctl] + mov eax, [edx + IOCTL.io_code] ;------------------------------------------------------ - cmp eax, 0 ;SRV_GETVERSION - jne @F + cmp eax, 0 ;SRV_GETVERSION + jne @F - cmp [edx + IOCTL.out_size], 4 - jb .fail - mov eax, [edx + IOCTL.output] - mov [eax], dword API_VERSION + cmp [edx + IOCTL.out_size], 4 + jb .fail + mov eax, [edx + IOCTL.output] + mov [eax], dword API_VERSION - xor eax, eax - ret + xor eax, eax + ret ;------------------------------------------------------ @@: - cmp eax, 1 ;SRV_HOOK - jne .fail + cmp eax, 1 ;SRV_HOOK + jne .fail - cmp [edx + IOCTL.inp_size], 3 ; Data input must be at least 3 bytes - jb .fail + cmp [edx + IOCTL.inp_size], 3 ; Data input must be at least 3 bytes + jb .fail - mov eax, [edx + IOCTL.input] - cmp byte [eax], 1 ; 1 means device number and bus number (pci) are given - jne .fail ; other types aren't supported for this card yet + mov eax, [edx + IOCTL.input] + cmp byte [eax], 1 ; 1 means device number and bus number (pci) are given + jne .fail ; other types aren't supported for this card yet ; check if the device is already listed - mov esi, device_list - mov ecx, [devices] - test ecx, ecx - jz .firstdevice + mov esi, device_list + mov ecx, [devices] + test ecx, ecx + jz .firstdevice ; mov eax, [edx + IOCTL.input] ; get the pci bus and device numbers - mov ax, [eax+1] ; + mov ax, [eax+1] ; .nextdevice: - mov ebx, [esi] - cmp al, byte[ebx + device.pci_bus] - jne @f - cmp ah, byte[ebx + device.pci_dev] - je .find_devicenum ; Device is already loaded, let's find it's device number + mov ebx, [esi] + cmp al, byte[ebx + device.pci_bus] + jne @f + cmp ah, byte[ebx + device.pci_dev] + je .find_devicenum ; Device is already loaded, let's find it's device number @@: - add esi, 4 - loop .nextdevice + add esi, 4 + loop .nextdevice ; This device doesn't have its own eth_device structure yet, lets create one .firstdevice: - cmp [devices], MAX_DEVICES ; First check if the driver can handle one more card - jae .fail + cmp [devices], MAX_DEVICES ; First check if the driver can handle one more card + jae .fail - allocate_and_clear ebx, sizeof.device, .fail ; Allocate the buffer for device structure + allocate_and_clear ebx, sizeof.device, .fail ; Allocate the buffer for device structure ; Fill in the direct call addresses into the struct - mov [ebx + device.reset], reset - mov [ebx + device.transmit], transmit - mov [ebx + device.unload], unload - mov [ebx + device.name], my_service + mov [ebx + device.reset], reset + mov [ebx + device.transmit], transmit + mov [ebx + device.unload], unload + mov [ebx + device.name], my_service ; save the pci bus and device numbers - mov eax, [edx + IOCTL.input] - movzx ecx, byte[eax+1] - mov [ebx + device.pci_bus], ecx - movzx ecx, byte[eax+2] - mov [ebx + device.pci_dev], ecx + mov eax, [edx + IOCTL.input] + movzx ecx, byte[eax+1] + mov [ebx + device.pci_bus], ecx + movzx ecx, byte[eax+2] + mov [ebx + device.pci_dev], ecx ; Now, it's time to find the base io address of the PCI device - stdcall PCI_find_io, [ebx + device.pci_bus], [ebx + device.pci_dev] - mov [ebx + device.io_addr], eax + stdcall PCI_find_io, [ebx + device.pci_bus], [ebx + device.pci_dev] + mov [ebx + device.io_addr], eax ; We've found the io address, find IRQ now - invoke PciRead8, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.interrupt_line - mov [ebx + device.irq_line], al + invoke PciRead8, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.interrupt_line + mov [ebx + device.irq_line], al - DEBUGF 1,"Hooking into device, dev:%x, bus:%x, irq:%x, addr:%x\n",\ - [ebx + device.pci_dev]:1,[ebx + device.pci_bus]:1,[ebx + device.irq_line]:1,[ebx + device.io_addr]:4 + DEBUGF 1,"Hooking into device, dev:%x, bus:%x, irq:%x, addr:%x\n",\ + [ebx + device.pci_dev]:1,[ebx + device.pci_bus]:1,[ebx + device.irq_line]:1,[ebx + device.io_addr]:4 ; Ok, the eth_device structure is ready, let's probe the device - call probe ; this function will output in eax - test eax, eax - jnz .err ; If an error occurred, exit + call probe ; this function will output in eax + test eax, eax + jnz .err ; If an error occurred, exit - mov eax, [devices] ; Add the device structure to our device list - mov [device_list+4*eax], ebx ; (IRQ handler uses this list to find device) - inc [devices] ; + mov eax, [devices] ; Add the device structure to our device list + mov [device_list+4*eax], ebx ; (IRQ handler uses this list to find device) + inc [devices] ; - mov [ebx + device.type], NET_TYPE_ETH - invoke NetRegDev + mov [ebx + device.type], NET_TYPE_ETH + invoke NetRegDev - cmp eax, -1 - je .destroy + cmp eax, -1 + je .destroy - ret + ret ; If the device was already loaded, find the device number and return it in eax .find_devicenum: - DEBUGF 1,"Trying to find device number of already registered device\n" - invoke NetPtrToNum ; This kernel procedure converts a pointer to device struct in ebx - ; into a device number in edi - mov eax, edi ; Application wants it in eax instead - DEBUGF 1,"Kernel says: %u\n", eax - ret + DEBUGF 1,"Trying to find device number of already registered device\n" + invoke NetPtrToNum ; This kernel procedure converts a pointer to device struct in ebx + ; into a device number in edi + mov eax, edi ; Application wants it in eax instead + DEBUGF 1,"Kernel says: %u\n", eax + ret ; If an error occurred, remove all allocated data and exit (returning -1 in eax) .destroy: - ; todo: reset device into virgin state + ; todo: reset device into virgin state .err: - invoke KernelFree, ebx + invoke KernelFree, ebx .fail: - or eax, -1 - ret + or eax, -1 + ret ;------------------------------------------------------ endp @@ -695,226 +695,226 @@ endp ;------- probe: - DEBUGF 1, "Probing\n" + DEBUGF 1, "Probing\n" ; Make the device a bus master - invoke PciRead32, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.command - or al, PCI_CMD_MASTER - invoke PciWrite32, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.command, eax + invoke PciRead32, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.command + or al, PCI_CMD_MASTER + invoke PciWrite32, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.command, eax ; get device id - invoke PciRead16, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.device_id - mov [ebx + device.chip_id], ax + invoke PciRead16, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.device_id + mov [ebx + device.chip_id], ax - mov esi, chiplist + mov esi, chiplist .loop: - cmp word[esi+2], ax - je .got_it - add esi, 8 - cmp esi, chiplist + 6*8 - jbe .loop - DEBUGF 2, "Unknown chip: 0x%x, continuing anyway\n", ax - jmp .done + cmp word[esi+2], ax + je .got_it + add esi, 8 + cmp esi, chiplist + 6*8 + jbe .loop + DEBUGF 2, "Unknown chip: 0x%x, continuing anyway\n", ax + jmp .done .got_it: - mov eax, dword[esi+4] - mov [ebx + device.name], eax - DEBUGF 1, "Chip type = %s\n", eax + mov eax, dword[esi+4] + mov [ebx + device.name], eax + DEBUGF 1, "Chip type = %s\n", eax .done: ; get revision id. - invoke PciRead8, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.revision_id - mov [ebx + device.revision], al + invoke PciRead8, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.revision_id + mov [ebx + device.revision], al - movzx eax, [ebx + device.revision] - DEBUGF 1, "Card revision = 0x%x\n", eax + movzx eax, [ebx + device.revision] + DEBUGF 1, "Card revision = 0x%x\n", eax ; D-Link provided reset code (with comment additions) - cmp al, 0x40 - jb .below_x40 + cmp al, 0x40 + jb .below_x40 - mov ax, [ebx + device.chip_id] - DEBUGF 1, "Enabling Sticky Bit Workaround for Chip_id: 0x%x\n", ax + mov ax, [ebx + device.chip_id] + DEBUGF 1, "Enabling Sticky Bit Workaround for Chip_id: 0x%x\n", ax - ; clear sticky bit before reset & read ethernet address - set_io [ebx + device.io_addr], 0 - set_io [ebx + device.io_addr], bySTICKHW - in al, dx - and al, 0xFC - out dx, al + ; clear sticky bit before reset & read ethernet address + set_io [ebx + device.io_addr], 0 + set_io [ebx + device.io_addr], bySTICKHW + in al, dx + and al, 0xFC + out dx, al - ; (bits written are cleared?) - ; disable force PME-enable - set_io [ebx + device.io_addr], byWOLcgClr - mov al, 0x80 - out dx, al + ; (bits written are cleared?) + ; disable force PME-enable + set_io [ebx + device.io_addr], byWOLcgClr + mov al, 0x80 + out dx, al - ; disable power-event config bit - mov al, 0xFF - out dx, al + ; disable power-event config bit + mov al, 0xFF + out dx, al - ; clear power status (undocumented in vt6102 docs?) - set_io [ebx + device.io_addr], byPwrcsrClr - out dx, al + ; clear power status (undocumented in vt6102 docs?) + set_io [ebx + device.io_addr], byPwrcsrClr + out dx, al .below_x40: ; Reset the chip to erase previous misconfiguration. - set_io [ebx + device.io_addr], 0 - set_io [ebx + device.io_addr], byCR0 - mov ax, CR_SFRST - out dx, ax + set_io [ebx + device.io_addr], 0 + set_io [ebx + device.io_addr], byCR0 + mov ax, CR_SFRST + out dx, ax ; if vt3043 delay after reset - cmp [ebx + device.revision], 0x40 - jae @f - mov esi, 200 ; 2000ms - invoke Sleep + cmp [ebx + device.revision], 0x40 + jae @f + mov esi, 200 ; 2000ms + invoke Sleep @@: ; polling till software reset complete - mov ecx, W_MAX_TIMEOUT + mov ecx, W_MAX_TIMEOUT .poll_again: - in ax, dx - test ax, CR_SFRST - jz @f - loop .poll_again - DEBUGF 1, "Soft reset timeout!\n" + in ax, dx + test ax, CR_SFRST + jz @f + loop .poll_again + DEBUGF 1, "Soft reset timeout!\n" @@: ; issue AUTOLoad in EECSR to reload eeprom - set_io [ebx + device.io_addr], byEECSR - mov al, 0x20 - out dx, al + set_io [ebx + device.io_addr], byEECSR + mov al, 0x20 + out dx, al ; if vt3065 delay after reset - cmp [ebx + device.revision], 0x40 - jb .not_vt3065 + cmp [ebx + device.revision], 0x40 + jb .not_vt3065 - ; delay 10ms to let MAC stable - mov esi, 1 ; 10ms - invoke Sleep + ; delay 10ms to let MAC stable + mov esi, 1 ; 10ms + invoke Sleep - ; for 3065D, EEPROM reloaded will cause bit 0 in MAC_REG_CFGA - ; turned on. it makes MAC receive magic packet - ; automatically. So, we turn it off. (D-Link) + ; for 3065D, EEPROM reloaded will cause bit 0 in MAC_REG_CFGA + ; turned on. it makes MAC receive magic packet + ; automatically. So, we turn it off. (D-Link) - set_io [ebx + device.io_addr], byCFGA - in al, dx - and al, 0xFE - out dx, al + set_io [ebx + device.io_addr], byCFGA + in al, dx + and al, 0xFE + out dx, al - ; turn on bit2 in PCI configuration register 0x53 , only for 3065 - invoke PciRead8, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_REG_MODE3 - or al, MODE3_MIION - invoke PciWrite8, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_REG_MODE3, eax + ; turn on bit2 in PCI configuration register 0x53 , only for 3065 + invoke PciRead8, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_REG_MODE3 + or al, MODE3_MIION + invoke PciWrite8, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_REG_MODE3, eax .not_vt3065: ; back off algorithm, disable the right-most 4-bit off CFGD - set_io [ebx + device.io_addr], 0 - set_io [ebx + device.io_addr], byCFGD - in al, dx - and al, not (CFGD_RANDOM or CFGD_CFDX or CFGD_CEREN or CFGD_CETEN) - out dx, al + set_io [ebx + device.io_addr], 0 + set_io [ebx + device.io_addr], byCFGD + in al, dx + and al, not (CFGD_RANDOM or CFGD_CFDX or CFGD_CEREN or CFGD_CETEN) + out dx, al ; reload eeprom - call reload_eeprom + call reload_eeprom ; read MAC - call read_mac + call read_mac ; restart MII auto-negotiation - stdcall WriteMII, 0, 1 shl 9, 1 + stdcall WriteMII, 0, 1 shl 9, 1 - DEBUGF 1, "Analyzing Media type, this may take several seconds" + DEBUGF 1, "Analyzing Media type, this may take several seconds" - mov ecx, 5 + mov ecx, 5 .read_again: - mov esi, 1 - invoke Sleep + mov esi, 1 + invoke Sleep - stdcall ReadMII, 1 - test eax, 0x0020 - jnz .read_done - loop .read_again - DEBUGF 1, "timeout!\n" + stdcall ReadMII, 1 + test eax, 0x0020 + jnz .read_done + loop .read_again + DEBUGF 1, "timeout!\n" .read_done: - DEBUGF 1, "OK\n" + DEBUGF 1, "OK\n" if 0 - set_io [ebx + device.io_addr], 0 - set_io [ebx + device.io_addr], 0x6C - in al, dx - and eax, 0xFF - DEBUGF 1, "MII : Address %x\n", ax + set_io [ebx + device.io_addr], 0 + set_io [ebx + device.io_addr], 0x6C + in al, dx + and eax, 0xFF + DEBUGF 1, "MII : Address %x\n", ax - stdcall ReadMII, 1 - DEBUGF 1, "status 0x%x\n", ax + stdcall ReadMII, 1 + DEBUGF 1, "status 0x%x\n", ax - stdcall ReadMII, 4 - DEBUGF 1, "advertising 0x%x\n", ax + stdcall ReadMII, 4 + DEBUGF 1, "advertising 0x%x\n", ax - stdcall ReadMII, 5 - DEBUGF 1, "link 0x%x\n", ax + stdcall ReadMII, 5 + DEBUGF 1, "link 0x%x\n", ax end if ; query MII to know LineSpeed, duplex mode - set_io [ebx + device.io_addr], 0 - set_io [ebx + device.io_addr], MIIStatus - in al, dx - test al, MIISR_SPEED - jz .100mbps - DEBUGF 1, "Linespeed=10Mbs\n" - jmp @f + set_io [ebx + device.io_addr], 0 + set_io [ebx + device.io_addr], MIIStatus + in al, dx + test al, MIISR_SPEED + jz .100mbps + DEBUGF 1, "Linespeed=10Mbs\n" + jmp @f .100mbps: - DEBUGF 1, "Linespeed=100Mbs\n" + DEBUGF 1, "Linespeed=100Mbs\n" @@: - call QueryAuto + call QueryAuto - test eax, 1 - jz .halfduplex + test eax, 1 + jz .halfduplex - DEBUGF 1, "Fullduplex\n" - set_io [ebx + device.io_addr], 0 - set_io [ebx + device.io_addr], byCR0 - mov ax, CR_FDX - out dx, ax - jmp @f + DEBUGF 1, "Fullduplex\n" + set_io [ebx + device.io_addr], 0 + set_io [ebx + device.io_addr], byCR0 + mov ax, CR_FDX + out dx, ax + jmp @f .halfduplex: - DEBUGF 1, "Halfduplex\n" + DEBUGF 1, "Halfduplex\n" @@: ; set MII 10 FULL ON, only apply in vt3043 - cmp [ebx + device.chip_id], 0x3043 - jne @f - stdcall WriteMII, 0x17, 1 shl 1, 1 + cmp [ebx + device.chip_id], 0x3043 + jne @f + stdcall WriteMII, 0x17, 1 shl 1, 1 @@: ; turn on MII link change - set_io [ebx + device.io_addr], 0 - set_io [ebx + device.io_addr], byMIICR - in al, dx - and al, 0x7F - out dx, al - push eax + set_io [ebx + device.io_addr], 0 + set_io [ebx + device.io_addr], byMIICR + in al, dx + and al, 0x7F + out dx, al + push eax - call MIIDelay + call MIIDelay - set_io [ebx + device.io_addr], byMIIAD - mov al, 0x41 - out dx, al + set_io [ebx + device.io_addr], byMIIAD + mov al, 0x41 + out dx, al - call MIIDelay + call MIIDelay - pop eax - or al, 0x80 - set_io [ebx + device.io_addr], byMIICR - out dx, al + pop eax + or al, 0x80 + set_io [ebx + device.io_addr], byMIICR + out dx, al ;**************************************************************************; ;* ETH_RESET - Reset adapter *; @@ -922,113 +922,113 @@ end if reset: - DEBUGF 1, "reset\n" + DEBUGF 1, "reset\n" ; attach int handler - movzx eax, [ebx + device.irq_line] - DEBUGF 1,"Attaching int handler to irq %x\n", eax:1 - invoke AttachIntHandler, eax, int_handler, ebx - test eax, eax - jnz @f - DEBUGF 2,"Could not attach int handler!\n" - or eax, -1 - ret + movzx eax, [ebx + device.irq_line] + DEBUGF 1,"Attaching int handler to irq %x\n", eax:1 + invoke AttachIntHandler, eax, int_handler, ebx + test eax, eax + jnz @f + DEBUGF 2,"Could not attach int handler!\n" + or eax, -1 + ret @@: ; Soft reset the chip. - set_io [ebx + device.io_addr], 0 - set_io [ebx + device.io_addr], byCR0 - mov ax, CR_SFRST - out dx, ax + set_io [ebx + device.io_addr], 0 + set_io [ebx + device.io_addr], byCR0 + mov ax, CR_SFRST + out dx, ax - call MIIDelay + call MIIDelay ; Initialize rings - call init_ring + call init_ring ; Set Multicast - call set_rx_mode + call set_rx_mode ; set TCR RCR threshold to store and forward - set_io [ebx + device.io_addr], 0 - set_io [ebx + device.io_addr], byBCR0 - mov al, 0x3E - out dx, al + set_io [ebx + device.io_addr], 0 + set_io [ebx + device.io_addr], byBCR0 + mov al, 0x3E + out dx, al - set_io [ebx + device.io_addr], byBCR1 - mov al, 0x38 - out dx, al + set_io [ebx + device.io_addr], byBCR1 + mov al, 0x38 + out dx, al - set_io [ebx + device.io_addr], byRCR - mov al, 0x2C - out dx, al + set_io [ebx + device.io_addr], byRCR + mov al, 0x2C + out dx, al - set_io [ebx + device.io_addr], byTCR - mov al, 0x60 - out dx, al + set_io [ebx + device.io_addr], byTCR + mov al, 0x60 + out dx, al ; Set Fulldupex - call QueryAuto - test eax, eax ; full duplex? - jz @f + call QueryAuto + test eax, eax ; full duplex? + jz @f - set_io [ebx + device.io_addr], 0 - set_io [ebx + device.io_addr], byCFGD - mov al, CFGD_CFDX - out dx, al + set_io [ebx + device.io_addr], 0 + set_io [ebx + device.io_addr], byCFGD + mov al, CFGD_CFDX + out dx, al - set_io [ebx + device.io_addr], byCR0 - mov ax, CR_FDX - out dx, ax + set_io [ebx + device.io_addr], byCR0 + mov ax, CR_FDX + out dx, ax @@: ; ENABLE interrupts - set_io [ebx + device.io_addr], 0 - set_io [ebx + device.io_addr], byIMR0 - mov ax, DEFAULT_INTR - out dx, ax + set_io [ebx + device.io_addr], 0 + set_io [ebx + device.io_addr], byIMR0 + mov ax, DEFAULT_INTR + out dx, ax ; KICK NIC to WORK - set_io [ebx + device.io_addr], byCR0 - in ax, dx - and ax, not CR_STOP - or ax, CR_STRT or CR_TXON or CR_RXON or CR_DPOLL - out dx, ax + set_io [ebx + device.io_addr], byCR0 + in ax, dx + and ax, not CR_STOP + or ax, CR_STRT or CR_TXON or CR_RXON or CR_DPOLL + out dx, ax ; Set the mtu, kernel will be able to send now - mov [ebx + device.mtu], 1514 + mov [ebx + device.mtu], 1514 ; Set link state to unknown - mov [ebx + device.state], ETH_LINK_UNKNOWN + mov [ebx + device.state], ETH_LINK_UNKNOWN ; say reset was successful - xor eax, eax - ret + xor eax, eax + ret align 4 unload: - call reset - push eax edx - DEBUGF 1, "rhine disable\n" + call reset + push eax edx + DEBUGF 1, "rhine disable\n" - ; Switch to loopback mode to avoid hardware races. - set_io [ebx + device.io_addr], 0 - set_io [ebx + device.io_addr], byTCR - mov al, 0x61 - out dx, al + ; Switch to loopback mode to avoid hardware races. + set_io [ebx + device.io_addr], 0 + set_io [ebx + device.io_addr], byTCR + mov al, 0x61 + out dx, al - ; Stop the chip's Tx and Rx processes. - set_io [ebx + device.io_addr], byCR0 - mov ax, CR_STOP - out dx, ax - pop edx eax + ; Stop the chip's Tx and Rx processes. + set_io [ebx + device.io_addr], byCR0 + mov ax, CR_STOP + out dx, ax + pop edx eax - ret + ret @@ -1036,23 +1036,23 @@ unload: align 4 reload_eeprom: - DEBUGF 1, "Reload eeprom\n" + DEBUGF 1, "Reload eeprom\n" - set_io [ebx + device.io_addr], 0 - set_io [ebx + device.io_addr], byEECSR - mov al, 0x20 - out dx, al - ; Typically 2 cycles to reload. - mov ecx, 150 + set_io [ebx + device.io_addr], 0 + set_io [ebx + device.io_addr], byEECSR + mov al, 0x20 + out dx, al + ; Typically 2 cycles to reload. + mov ecx, 150 .reload: - in al, dx - test al, 0x20 - jz @f - loop .reload - DEBUGF 2, "Reload eeprom: timeout!\n" + in al, dx + test al, 0x20 + jz @f + loop .reload + DEBUGF 2, "Reload eeprom: timeout!\n" @@: - ret + ret @@ -1060,299 +1060,299 @@ reload_eeprom: align 4 init_ring: - DEBUGF 1, "Init ring\n" + DEBUGF 1, "Init ring\n" - lea edi, [ebx + device.rx_ring] - mov eax, edi - invoke GetPhysAddr - mov esi, eax - push esi - mov ecx, RX_RING_SIZE + lea edi, [ebx + device.rx_ring] + mov eax, edi + invoke GetPhysAddr + mov esi, eax + push esi + mov ecx, RX_RING_SIZE .rx_init: - add esi, sizeof.rx_head - mov [edi + rx_head.status], RX_SBITS_OWN_BIT - mov [edi + rx_head.control], PKT_BUF_SZ - push ecx - invoke KernelAlloc, PKT_BUF_SZ - pop ecx - mov [edi + rx_head.buff_addr_virt], eax - invoke GetPhysAddr - mov [edi + rx_head.buff_addr], eax ; buffer ptr - mov [edi + rx_head.next_desc], esi ; next head - add edi, sizeof.rx_head - dec ecx - jnz .rx_init - pop [edi - sizeof.rx_head + rx_head.next_desc] ; Mark the last entry as wrapping the ring. + add esi, sizeof.rx_head + mov [edi + rx_head.status], RX_SBITS_OWN_BIT + mov [edi + rx_head.control], PKT_BUF_SZ + push ecx + invoke KernelAlloc, PKT_BUF_SZ + pop ecx + mov [edi + rx_head.buff_addr_virt], eax + invoke GetPhysAddr + mov [edi + rx_head.buff_addr], eax ; buffer ptr + mov [edi + rx_head.next_desc], esi ; next head + add edi, sizeof.rx_head + dec ecx + jnz .rx_init + pop [edi - sizeof.rx_head + rx_head.next_desc] ; Mark the last entry as wrapping the ring. - lea edi, [ebx + device.tx_ring] - mov eax, edi - invoke GetPhysAddr - mov esi, eax - push esi - mov ecx, TX_RING_SIZE + lea edi, [ebx + device.tx_ring] + mov eax, edi + invoke GetPhysAddr + mov esi, eax + push esi + mov ecx, TX_RING_SIZE .tx_init: - add esi, sizeof.tx_head - mov [edi + tx_head.status], 0 - mov [edi + tx_head.control], 0x00E08000 - mov [edi + tx_head.buff_addr], 0 - mov [edi + tx_head.next_desc], esi - mov [edi + tx_head.buff_addr_virt], 0 - add edi, sizeof.tx_head - dec ecx - jnz .tx_init - pop [edi - sizeof.tx_head + tx_head.next_desc] ; Mark the last entry as wrapping the ring. + add esi, sizeof.tx_head + mov [edi + tx_head.status], 0 + mov [edi + tx_head.control], 0x00E08000 + mov [edi + tx_head.buff_addr], 0 + mov [edi + tx_head.next_desc], esi + mov [edi + tx_head.buff_addr_virt], 0 + add edi, sizeof.tx_head + dec ecx + jnz .tx_init + pop [edi - sizeof.tx_head + tx_head.next_desc] ; Mark the last entry as wrapping the ring. ; write Descriptors to MAC - lea eax, [ebx + device.rx_ring] - invoke GetPhysAddr - set_io [ebx + device.io_addr], 0 - set_io [ebx + device.io_addr], dwCurrentRxDescAddr - out dx, eax + lea eax, [ebx + device.rx_ring] + invoke GetPhysAddr + set_io [ebx + device.io_addr], 0 + set_io [ebx + device.io_addr], dwCurrentRxDescAddr + out dx, eax - lea eax, [ebx + device.tx_ring] - invoke GetPhysAddr - set_io [ebx + device.io_addr], dwCurrentTxDescAddr - out dx, eax + lea eax, [ebx + device.tx_ring] + invoke GetPhysAddr + set_io [ebx + device.io_addr], dwCurrentTxDescAddr + out dx, eax - xor eax, eax - mov [ebx + device.cur_rx], ax - mov [ebx + device.cur_tx], ax - mov [ebx + device.last_tx], ax + xor eax, eax + mov [ebx + device.cur_rx], ax + mov [ebx + device.cur_tx], ax + mov [ebx + device.last_tx], ax - ret + ret align 4 QueryAuto: - DEBUGF 1, "Query Auto\n" + DEBUGF 1, "Query Auto\n" - push ecx - stdcall ReadMII, 0x04 ; advertised - mov ecx, eax - stdcall ReadMII, 0x05 - and ecx, eax + push ecx + stdcall ReadMII, 0x04 ; advertised + mov ecx, eax + stdcall ReadMII, 0x05 + and ecx, eax - xor eax, eax - test ecx, 0x100 - jnz .one + xor eax, eax + test ecx, 0x100 + jnz .one - and ecx, 0x1C0 - cmp ecx, 0x40 - jne .zero + and ecx, 0x1C0 + cmp ecx, 0x40 + jne .zero .one: - inc eax - DEBUGF 1, "AutoNego OK!\n" + inc eax + DEBUGF 1, "AutoNego OK!\n" .zero: - pop ecx + pop ecx - ret + ret -proc ReadMII stdcall, byMIIIndex:dword +proc ReadMII stdcall, byMIIIndex:dword ; DEBUGF 1, "ReadMII Index=%x\n", [byMIIIndex] - push esi ebx ecx edx + push esi ebx ecx edx - set_io [ebx + device.io_addr], 0 - set_io [ebx + device.io_addr], byMIIAD - in al, dx - mov bl, al + set_io [ebx + device.io_addr], 0 + set_io [ebx + device.io_addr], byMIIAD + in al, dx + mov bl, al - set_io [ebx + device.io_addr], byMIICR - in al, dx - mov bh, al - and al, 0x7F - out dx, al + set_io [ebx + device.io_addr], byMIICR + in al, dx + mov bh, al + and al, 0x7F + out dx, al - call MIIDelay + call MIIDelay - mov al, byte [byMIIIndex] - set_io [ebx + device.io_addr], byMIIAD - out dx, al + mov al, byte [byMIIIndex] + set_io [ebx + device.io_addr], byMIIAD + out dx, al - call MIIDelay + call MIIDelay - set_io [ebx + device.io_addr], byMIICR - in al, dx - or al, 0x40 - out dx, al + set_io [ebx + device.io_addr], byMIICR + in al, dx + or al, 0x40 + out dx, al - mov ecx, 200 + mov ecx, 200 .read_again: - in al, dx - test al, 0x40 - jz @f + in al, dx + test al, 0x40 + jz @f - mov esi, 10 - invoke Sleep - dec ecx - jnz .read_again - DEBUGF 2, "ReadMII: timeout!\n" + mov esi, 10 + invoke Sleep + dec ecx + jnz .read_again + DEBUGF 2, "ReadMII: timeout!\n" @@: - call MIIDelay + call MIIDelay - set_io [ebx + device.io_addr], byMIIAD - in ax, dx + set_io [ebx + device.io_addr], byMIIAD + in ax, dx - push eax - mov ax, bx - set_io [ebx + device.io_addr], byMIIAD - out dx, al + push eax + mov ax, bx + set_io [ebx + device.io_addr], byMIIAD + out dx, al - shr ax, 8 - set_io [ebx + device.io_addr], byMIICR - out dx, al + shr ax, 8 + set_io [ebx + device.io_addr], byMIICR + out dx, al - call MIIDelay + call MIIDelay - pop eax - and eax, 0xFFFF - rol ax, 8 + pop eax + and eax, 0xFFFF + rol ax, 8 - pop edx ecx ebx esi - ret + pop edx ecx ebx esi + ret endp -proc WriteMII stdcall, byMIISetByte:dword, byMIISetBit:dword, byMIIOP:dword +proc WriteMII stdcall, byMIISetByte:dword, byMIISetBit:dword, byMIIOP:dword ; DEBUGF 1, "WriteMII SetByte=%x SetBit=%x OP=%x\n", [byMIISetByte], [byMIISetBit], [byMIIOP] - push ebx eax ecx edx + push ebx eax ecx edx - set_io [ebx + device.io_addr], 0 - set_io [ebx + device.io_addr], byMIIAD - in al, dx - mov bl, al + set_io [ebx + device.io_addr], 0 + set_io [ebx + device.io_addr], byMIIAD + in al, dx + mov bl, al - set_io [ebx + device.io_addr], byMIICR - in al, dx - mov bh, al - and al, 0x7F - out dx, al + set_io [ebx + device.io_addr], byMIICR + in al, dx + mov bh, al + and al, 0x7F + out dx, al - call MIIDelay + call MIIDelay - mov al, byte [byMIISetByte] - set_io [ebx + device.io_addr], byMIIAD - out dx, al + mov al, byte [byMIISetByte] + set_io [ebx + device.io_addr], byMIIAD + out dx, al - call MIIDelay + call MIIDelay - set_io [ebx + device.io_addr], byMIICR - in al, dx - or al, 0x40 - out dx, al + set_io [ebx + device.io_addr], byMIICR + in al, dx + or al, 0x40 + out dx, al - mov ecx, 200 + mov ecx, 200 .read_again0: - in al, dx - test al, 0x40 - jz .done + in al, dx + test al, 0x40 + jz .done - mov esi, 10 - invoke Sleep - dec ecx - jnz .read_again0 - DEBUGF 2, "WriteMII: timeout (1)\n" + mov esi, 10 + invoke Sleep + dec ecx + jnz .read_again0 + DEBUGF 2, "WriteMII: timeout (1)\n" .done: - call MIIDelay + call MIIDelay - set_io [ebx + device.io_addr], wMIIDATA - in ax, dx + set_io [ebx + device.io_addr], wMIIDATA + in ax, dx - mov ecx, [byMIISetBit] - rol cx, 8 + mov ecx, [byMIISetBit] + rol cx, 8 - cmp byte [byMIIOP], 0 - jne @f - not ecx - and ax, cx - jmp .end_mascarad + cmp byte [byMIIOP], 0 + jne @f + not ecx + and ax, cx + jmp .end_mascarad @@: - or ax, cx + or ax, cx .end_mascarad: - set_io [ebx + device.io_addr], wMIIDATA - out dx, ax + set_io [ebx + device.io_addr], wMIIDATA + out dx, ax - call MIIDelay + call MIIDelay - set_io [ebx + device.io_addr], byMIICR - in al, dx - or al, 0x20 - out dx, al + set_io [ebx + device.io_addr], byMIICR + in al, dx + or al, 0x20 + out dx, al - mov ecx, 200 + mov ecx, 200 .read_again1: - in al, dx - test al, 0x20 - jz @f + in al, dx + test al, 0x20 + jz @f - mov esi, 10 - invoke Sleep - dec ecx - jnz .read_again1 - DEBUGF 2, "WriteMII timeout (2)\n" + mov esi, 10 + invoke Sleep + dec ecx + jnz .read_again1 + DEBUGF 2, "WriteMII timeout (2)\n" @@: - call MIIDelay + call MIIDelay - mov ax, bx - and al, 0x7F - set_io [ebx + device.io_addr], byMIIAD - out dx, al + mov ax, bx + and al, 0x7F + set_io [ebx + device.io_addr], byMIIAD + out dx, al - shr ax, 8 - set_io [ebx + device.io_addr], byMIICR - out dx, al + shr ax, 8 + set_io [ebx + device.io_addr], byMIICR + out dx, al - call MIIDelay + call MIIDelay - pop edx ecx eax ebx - ret + pop edx ecx eax ebx + ret endp align 4 MIIDelay: - mov ecx, 0x7FFF + mov ecx, 0x7FFF @@: - in al, 0x61 - in al, 0x61 - in al, 0x61 - in al, 0x61 - loop @b + in al, 0x61 + in al, 0x61 + in al, 0x61 + in al, 0x61 + loop @b - ret + ret align 4 set_rx_mode: - DEBUGF 1, "Set RX mode\n" + DEBUGF 1, "Set RX mode\n" - ; ! IFF_PROMISC - mov eax, 0xffffffff - set_io [ebx + device.io_addr], 0 - set_io [ebx + device.io_addr], byMAR0 - out dx, eax + ; ! IFF_PROMISC + mov eax, 0xffffffff + set_io [ebx + device.io_addr], 0 + set_io [ebx + device.io_addr], byMAR0 + out dx, eax - set_io [ebx + device.io_addr], byMAR4 - out dx, eax + set_io [ebx + device.io_addr], byMAR4 + out dx, eax - set_io [ebx + device.io_addr], byRCR - mov al, 0x6C ;rx_mode = 0x0C; - out dx, al ;outb(0x60 /* thresh */ | rx_mode, byRCR ); + set_io [ebx + device.io_addr], byRCR + mov al, 0x6C ;rx_mode = 0x0C; + out dx, al ;outb(0x60 /* thresh */ | rx_mode, byRCR ); - ret + ret @@ -1361,8 +1361,8 @@ set_rx_mode: ; Beware of PCI posted writes macro IOSYNC { - set_io [ebx + device.io_addr], StationAddr - in al, dx + set_io [ebx + device.io_addr], StationAddr + in al, dx } @@ -1370,22 +1370,22 @@ macro IOSYNC align 4 read_mac: - lea edi, [ebx + device.mac] - set_io [ebx + device.io_addr], 0 - set_io [ebx + device.io_addr], byPAR0 - mov ecx, 6 + lea edi, [ebx + device.mac] + set_io [ebx + device.io_addr], 0 + set_io [ebx + device.io_addr], byPAR0 + mov ecx, 6 .next: - in al, dx - stosb - inc edx - dec ecx - jnz .next + in al, dx + stosb + inc edx + dec ecx + jnz .next - DEBUGF 1,"MAC = %x-%x-%x-%x-%x-%x\n", \ - [ebx + device.mac+0]:2,[ebx + device.mac+1]:2,[ebx + device.mac+2]:2,[ebx + device.mac+3]:2,[ebx + device.mac+4]:2,[ebx + device.mac+5]:2 + DEBUGF 1,"MAC = %x-%x-%x-%x-%x-%x\n", \ + [ebx + device.mac+0]:2,[ebx + device.mac+1]:2,[ebx + device.mac+2]:2,[ebx + device.mac+3]:2,[ebx + device.mac+4]:2,[ebx + device.mac+5]:2 - ret + ret ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; @@ -1400,68 +1400,68 @@ read_mac: align 4 proc transmit stdcall bufferptr, buffersize - pushf - cli + pushf + cli - DEBUGF 1,"Transmitting packet, buffer:%x, size:%u\n", [bufferptr], [buffersize] - mov eax, [bufferptr] - DEBUGF 1,"To: %x-%x-%x-%x-%x-%x From: %x-%x-%x-%x-%x-%x Type:%x%x\n",\ - [eax+00]:2,[eax+01]:2,[eax+02]:2,[eax+03]:2,[eax+04]:2,[eax+05]:2,\ - [eax+06]:2,[eax+07]:2,[eax+08]:2,[eax+09]:2,[eax+10]:2,[eax+11]:2,\ - [eax+13]:2,[eax+12]:2 + DEBUGF 1,"Transmitting packet, buffer:%x, size:%u\n", [bufferptr], [buffersize] + mov eax, [bufferptr] + DEBUGF 1,"To: %x-%x-%x-%x-%x-%x From: %x-%x-%x-%x-%x-%x Type:%x%x\n",\ + [eax+00]:2,[eax+01]:2,[eax+02]:2,[eax+03]:2,[eax+04]:2,[eax+05]:2,\ + [eax+06]:2,[eax+07]:2,[eax+08]:2,[eax+09]:2,[eax+10]:2,[eax+11]:2,\ + [eax+13]:2,[eax+12]:2 - cmp [buffersize], 1514 - ja .fail - cmp [buffersize], 60 - jb .fail + cmp [buffersize], 1514 + ja .fail + cmp [buffersize], 60 + jb .fail - movzx eax, [ebx + device.cur_tx] - mov ecx, sizeof.tx_head - mul ecx - lea edi, [ebx + device.tx_ring] - add edi, eax + movzx eax, [ebx + device.cur_tx] + mov ecx, sizeof.tx_head + mul ecx + lea edi, [ebx + device.tx_ring] + add edi, eax - cmp [edi + tx_head.buff_addr_virt], 0 - jne .fail + cmp [edi + tx_head.buff_addr_virt], 0 + jne .fail - mov eax, [bufferptr] - mov [edi + tx_head.buff_addr_virt], eax - invoke GetPhysAddr - mov [edi + tx_head.buff_addr], eax - mov ecx, [buffersize] - and ecx, TX_CBITS_TX_BUF_SIZE - or ecx, 0x00E08000 - mov [edi + tx_head.control], ecx - or [edi + tx_head.status], TX_SBITS_OWN_BIT + mov eax, [bufferptr] + mov [edi + tx_head.buff_addr_virt], eax + invoke GetPhysAddr + mov [edi + tx_head.buff_addr], eax + mov ecx, [buffersize] + and ecx, TX_CBITS_TX_BUF_SIZE + or ecx, 0x00E08000 + mov [edi + tx_head.control], ecx + or [edi + tx_head.status], TX_SBITS_OWN_BIT - set_io [ebx + device.io_addr], 0 - set_io [ebx + device.io_addr], byCR1 - in al, dx - or al, CR1_TDMD1 - out dx, al + set_io [ebx + device.io_addr], 0 + set_io [ebx + device.io_addr], byCR1 + in al, dx + or al, CR1_TDMD1 + out dx, al - inc [ebx + device.cur_tx] - and [ebx + device.cur_tx], TX_RING_SIZE-1 + inc [ebx + device.cur_tx] + and [ebx + device.cur_tx], TX_RING_SIZE-1 - ;outw(IMRShadow,byIMR0); ; + ;outw(IMRShadow,byIMR0); ; ; Update stats - inc [ebx + device.packets_tx] - mov ecx, [buffersize] - add dword [ebx + device.bytes_tx], ecx - adc dword [ebx + device.bytes_tx + 4], 0 + inc [ebx + device.packets_tx] + mov ecx, [buffersize] + add dword [ebx + device.bytes_tx], ecx + adc dword [ebx + device.bytes_tx + 4], 0 - DEBUGF 1,"Transmit OK\n" - popf - xor eax, eax - ret + DEBUGF 1,"Transmit OK\n" + popf + xor eax, eax + ret .fail: - DEBUGF 2,"Transmit failed\n" - invoke KernelFree, [bufferptr] - popf - or eax, -1 - ret + DEBUGF 2,"Transmit failed\n" + invoke KernelFree, [bufferptr] + popf + or eax, -1 + ret endp @@ -1476,179 +1476,179 @@ endp align 4 int_handler: - push ebx esi edi + push ebx esi edi - DEBUGF 1,"INT\n" + DEBUGF 1,"INT\n" ; Find pointer of device which made IRQ occur - mov ecx, [devices] - test ecx, ecx - jz .nothing - mov esi, device_list + mov ecx, [devices] + test ecx, ecx + jz .nothing + mov esi, device_list .nextdevice: - mov ebx, [esi] + mov ebx, [esi] - set_io [ebx + device.io_addr], 0 - set_io [ebx + device.io_addr], IntrStatus - in ax, dx - out dx, ax ; send it back to ACK - test ax, ax - jnz .got_it + set_io [ebx + device.io_addr], 0 + set_io [ebx + device.io_addr], IntrStatus + in ax, dx + out dx, ax ; send it back to ACK + test ax, ax + jnz .got_it .continue: - add esi, 4 - dec ecx - jnz .nextdevice + add esi, 4 + dec ecx + jnz .nextdevice .nothing: - pop edi esi ebx - xor eax, eax + pop edi esi ebx + xor eax, eax - ret ; If no device was found, abort (The irq was probably for a device, not registered to this driver) + ret ; If no device was found, abort (The irq was probably for a device, not registered to this driver) .got_it: - DEBUGF 1, "status=0x%x\n", ax + DEBUGF 1, "status=0x%x\n", ax - push ax + push ax - test ax, IntrRxDone - jz .not_RX + test ax, IntrRxDone + jz .not_RX - push ebx + push ebx .more_RX: - pop ebx + pop ebx ; Get the current descriptor pointer - movzx eax, [ebx + device.cur_rx] - mov ecx, sizeof.rx_head - mul ecx - lea edi, [ebx + device.rx_ring] - add edi, eax + movzx eax, [ebx + device.cur_rx] + mov ecx, sizeof.rx_head + mul ecx + lea edi, [ebx + device.rx_ring] + add edi, eax ; Check it's status - test [edi + rx_head.status], RX_SBITS_OWN_BIT - jnz .not_bit_own + test [edi + rx_head.status], RX_SBITS_OWN_BIT + jnz .not_bit_own - DEBUGF 1, "Packet status = 0x%x\n", [edi + rx_head.status] + DEBUGF 1, "Packet status = 0x%x\n", [edi + rx_head.status] ; TODO: check error bits ; get length - mov ecx, [edi + rx_head.status] - and ecx, RX_SBITS_FRAME_LENGTH - shr ecx, 16 - sub ecx, 4 ; We dont want CRC + mov ecx, [edi + rx_head.status] + and ecx, RX_SBITS_FRAME_LENGTH + shr ecx, 16 + sub ecx, 4 ; We dont want CRC ; Update stats - add dword [ebx + device.bytes_rx], ecx - adc dword [ebx + device.bytes_rx + 4], 0 - inc [ebx + device.packets_rx] + add dword [ebx + device.bytes_rx], ecx + adc dword [ebx + device.bytes_rx + 4], 0 + inc [ebx + device.packets_rx] ; Push packet size and pointer, kernel will need it.. - push ebx - push .more_RX ; return ptr + push ebx + push .more_RX ; return ptr - push ecx ; full packet size - push [edi + rx_head.buff_addr_virt] + push ecx ; full packet size + push [edi + rx_head.buff_addr_virt] ; reset the RX descriptor - push edi - invoke KernelAlloc, PKT_BUF_SZ - pop edi - mov [edi + rx_head.buff_addr_virt], eax - invoke GetPhysAddr - mov [edi + rx_head.buff_addr], eax - mov [edi + rx_head.status], RX_SBITS_OWN_BIT + push edi + invoke KernelAlloc, PKT_BUF_SZ + pop edi + mov [edi + rx_head.buff_addr_virt], eax + invoke GetPhysAddr + mov [edi + rx_head.buff_addr], eax + mov [edi + rx_head.status], RX_SBITS_OWN_BIT ; Use next descriptor next time - inc [ebx + device.cur_rx] - and [ebx + device.cur_rx], RX_RING_SIZE - 1 + inc [ebx + device.cur_rx] + and [ebx + device.cur_rx], RX_RING_SIZE - 1 ; At last, send packet to kernel - jmp [Eth_input] + jmp [Eth_input] .not_bit_own: .not_RX: - pop ax + pop ax - test ax, IntrTxDone - jz .not_TX + test ax, IntrTxDone + jz .not_TX .loop_tx: - movzx eax, [ebx + device.last_tx] - mov ecx, sizeof.tx_head - mul ecx - lea edi, [ebx + device.tx_ring] - add edi, eax + movzx eax, [ebx + device.last_tx] + mov ecx, sizeof.tx_head + mul ecx + lea edi, [ebx + device.tx_ring] + add edi, eax - test [edi + tx_head.status], TX_SBITS_OWN_BIT - jnz .not_TX + test [edi + tx_head.status], TX_SBITS_OWN_BIT + jnz .not_TX - cmp [edi + tx_head.buff_addr_virt], 0 - je .not_TX + cmp [edi + tx_head.buff_addr_virt], 0 + je .not_TX - DEBUGF 1,"Freeing buffer 0x%x\n", [edi + tx_head.buff_addr_virt] + DEBUGF 1,"Freeing buffer 0x%x\n", [edi + tx_head.buff_addr_virt] - push [edi + tx_head.buff_addr_virt] - mov [edi + tx_head.buff_addr_virt], 0 - invoke KernelFree + push [edi + tx_head.buff_addr_virt] + mov [edi + tx_head.buff_addr_virt], 0 + invoke KernelFree - inc [ebx + device.last_tx] - and [ebx + device.last_tx], TX_RING_SIZE - 1 + inc [ebx + device.last_tx] + and [ebx + device.last_tx], TX_RING_SIZE - 1 - jmp .loop_tx + jmp .loop_tx .not_TX: - ; On Rhine-II, Bit 3 indicates Tx descriptor write-back race. + ; On Rhine-II, Bit 3 indicates Tx descriptor write-back race. if 0 - cmp [ebx + device.chip_id], 0x3065 ;if (tp->chip_id == 0x3065) - jne @f - push ax - xor eax, eax - set_io [ebx + device.io_addr], IntrStatus2 - in al, dx ; intr_status |= inb(nic->ioaddr + IntrStatus2) << 16; - shl eax, 16 - pop ax + cmp [ebx + device.chip_id], 0x3065 ;if (tp->chip_id == 0x3065) + jne @f + push ax + xor eax, eax + set_io [ebx + device.io_addr], IntrStatus2 + in al, dx ; intr_status |= inb(nic->ioaddr + IntrStatus2) << 16; + shl eax, 16 + pop ax @@: end if if 0 - ; Acknowledge all of the current interrupt sources ASAP. - xor ecx, ecx - test eax, IntrTxDescRace - jz @f - set_io [ebx + device.io_addr], 0 - set_io [ebx + device.io_addr], IntrStatus2 - push ax - mov al, 0x08 - out dx, al - pop ax + ; Acknowledge all of the current interrupt sources ASAP. + xor ecx, ecx + test eax, IntrTxDescRace + jz @f + set_io [ebx + device.io_addr], 0 + set_io [ebx + device.io_addr], IntrStatus2 + push ax + mov al, 0x08 + out dx, al + pop ax @@: - set_io [ebx + device.io_addr], 0 - set_io [ebx + device.io_addr], IntrStatus - out dx, ax - IOSYNC + set_io [ebx + device.io_addr], 0 + set_io [ebx + device.io_addr], IntrStatus + out dx, ax + IOSYNC end if - pop edi esi ebx - xor eax, eax - inc eax + pop edi esi ebx + xor eax, eax + inc eax - ret + ret @@ -1661,27 +1661,27 @@ end data include '../peimport.inc' -my_service db 'RHINE',0 ; max 16 chars including zero +my_service db 'RHINE',0 ; max 16 chars including zero chiplist: - dd 0x30431106, rhine_3043;, RHINE_IOTYPE, RHINE_I_IOSIZE, CanHaveMII or ReqTxAlign or HasV1TxStat - dd 0x61001106, rhine_6100;, RHINE_IOTYPE, RHINE_I_IOSIZE, CanHaveMII or ReqTxAlign or HasV1TxStat - dd 0x30651106, rhine_6102;, RHINE_IOTYPE, RHINEII_IOSIZE, CanHaveMII or HasWOL - dd 0x31061106, rhine_6105;, RHINE_IOTYPE, RHINEII_IOSIZE, CanHaveMII or HasWOL + dd 0x30431106, rhine_3043;, RHINE_IOTYPE, RHINE_I_IOSIZE, CanHaveMII or ReqTxAlign or HasV1TxStat + dd 0x61001106, rhine_6100;, RHINE_IOTYPE, RHINE_I_IOSIZE, CanHaveMII or ReqTxAlign or HasV1TxStat + dd 0x30651106, rhine_6102;, RHINE_IOTYPE, RHINEII_IOSIZE, CanHaveMII or HasWOL + dd 0x31061106, rhine_6105;, RHINE_IOTYPE, RHINEII_IOSIZE, CanHaveMII or HasWOL ; Duplicate entry, with 'M' features enabled. ; dd 0x31061106, rhine_6105;, RHINE_IOTYPE, RHINEII_IOSIZE, CanHaveMII or HasWOL or HasIPChecksum or HasVLAN - dd 0x30531106, rhine_3053;, RHINE_IOTYPE, RHINEII_IOSIZE, CanHaveMII or HasWOL - dd 0 + dd 0x30531106, rhine_3053;, RHINE_IOTYPE, RHINEII_IOSIZE, CanHaveMII or HasWOL + dd 0 -rhine_3043 db "VIA VT3043 Rhine", 0 -rhine_6100 db "VIA VT86C100A Rhine", 0 -rhine_6102 db "VIA VT6102 Rhine-II", 0 -rhine_6105 db "VIA VT6105LOM Rhine-III (3106)", 0 -rhine_3053 db "VIA VT6105M Rhine-III (3053 prototype)", 0 +rhine_3043 db "VIA VT3043 Rhine", 0 +rhine_6100 db "VIA VT86C100A Rhine", 0 +rhine_6102 db "VIA VT6102 Rhine-II", 0 +rhine_6105 db "VIA VT6105LOM Rhine-III (3106)", 0 +rhine_3053 db "VIA VT6105M Rhine-III (3053 prototype)", 0 -include_debug_strings ; All data which FDO uses will be included here +include_debug_strings ; All data which FDO uses will be included here align 4 -devices dd 0 -device_list rd MAX_DEVICES ; This list contains all pointers to device structures the driver is handling +devices dd 0 +device_list rd MAX_DEVICES ; This list contains all pointers to device structures the driver is handling