1
0
kolibrios/programs/develop/scc/cc4.c
jacekm 1967c25fac scc 0.5.3
git-svn-id: svn://kolibrios.org@718 a494cfbc-eb01-0410-851d-a64ba20cac60
2008-02-08 11:41:42 +00:00

985 lines
27 KiB
C

/*
** Small-C Compiler -- Part 4 -- Back End.
** Copyright 1982, 1983, 1985, 1988 J. E. Hendrix
** Copyright 1998 H T Walheim
** All rights reserved.
*/
#include <stdio.h>
#include "cc.h"
/* #define DISOPT */ /* display optimizations values */
/*************************** externals ****************************/
extern char
*cptr, *macn, *litq, *symtab, optimize, ssname[NAMESIZE];
extern int
*stage, litlab, litptr, csp, output, oldseg, usexpr,
*snext, *stail, *slast;
/***************** optimizer command definitions ******************/
/* -- p-codes must not overlap these */
#define any 0x00FF /* matches any p-code */
#define _pop 0x00FE /* matches if corresponding POP2 exists */
#define pfree 0x00FD /* matches if pri register free */
#define sfree 0x00FC /* matches if sec register free */
#define comm 0x00FB /* matches if registers are commutative */
/* -- these digits are reserved for n */
#define go 0x0100 /* go n entries */
#define gc 0x0200 /* get code from n entries away */
#define gv 0x0300 /* get value from n entries away */
#define sum 0x0400 /* add value from nth entry away */
#define neg 0x0500 /* negate the value */
#define ife 0x0600 /* if value == n do commands to next 0 */
#define ifl 0x0700 /* if value < n do commands to next 0 */
#define swv 0x0800 /* swap value with value n entries away */
#define topop 0x0900 /* moves |code and current value to POP2 */
#define p1 0x0001 /* plus 1 */
#define p2 0x0002 /* plus 2 */
#define p3 0x0003 /* plus 3 */
#define p4 0x0004 /* plus 4 */
#define m1 0x00FF /* minus 1 */
#define m2 0x00FE /* minus 2 */
#define m3 0x00FD /* minus 3 */
#define m4 0x00FC /* minus 4 */
#define PRI 0030 /* primary register bits */
#define SEC 0003 /* secondary register bits */
#define USES 0011 /* use register contents */
#define ZAPS 0022 /* zap register contents */
#define PUSHES 0100 /* pushes onto the stack */
#define COMMUTES 0200 /* commutative p-code */
/******************** optimizer command lists *********************/
int
seq00[] = {0,ADD12,MOVE21,0, /* ADD21 */
go|p1,ADD21,0},
seq01[] = {0,ADD1n,0, /* rINC1 or rDEC1 ? */
ifl|m2,0,ifl|0,rDEC1,neg,0,ifl|p3,rINC1,0,0},
seq02[] = {0,ADD2n,0, /* rINC2 or rDEC2 ? */
ifl|m2,0,ifl|0,rDEC2,neg,0,ifl|p3,rINC2,0,0},
seq03[] = {0,rDEC1,PUTbp1,rINC1,0, /* SUBbpn or DECbp */
go|p2,ife|p1,DECbp,0,SUBbpn,0},
seq04[] = {0,rDEC1,PUTwp1,rINC1,0, /* SUBwpn or DECwp */
go|p2,ife|p1,DECwp,0,SUBwpn,0},
seq05[] = {0,rDEC1,PUTbm1,rINC1,0, /* SUB_m_ COMMAn */
go|p1,SUB_m_,go|p1,COMMAn,go|m1,0},
seq06[] = {0,rDEC1,PUTwm1,rINC1,0, /* SUB_m_ COMMAn */
go|p1,SUB_m_,go|p1,COMMAn,go|m1,0},
seq07[] = {0,GETw1m,GETw2n,ADD12,MOVE21,GETb1p,0, /* GETw2m GETb1p */
go|p4,gv|m3,go|m1,GETw2m,gv|m3,0},
seq08[] = {0,GETw1m,GETw2n,ADD12,MOVE21,GETb1pu,0, /* GETw2m GETb1pu */
go|p4,gv|m3,go|m1,GETw2m,gv|m3,0},
seq09[] = {0,GETw1m,GETw2n,ADD12,MOVE21,GETw1p,0, /* GETw2m GETw1p */
go|p4,gv|m3,go|m1,GETw2m,gv|m3,0},
seq10[] = {0,GETw1m,GETw2m,SWAP12,0, /* GETw2m GETw1m */
go|p2,GETw1m,gv|m1,go|m1,gv|m1,0},
seq11[] = {0,GETw1m,MOVE21,0, /* GETw2m */
go|p1,GETw2m,gv|m1,0},
seq12[] = {0,GETw1m,PUSH1,pfree,0, /* PUSHm */
go|p1,PUSHm,gv|m1,0},
seq13[] = {0,GETw1n,PUTbm1,pfree,0, /* PUT_m_ COMMAn */
PUT_m_,go|p1,COMMAn,go|m1,swv|p1,0},
seq14[] = {0,GETw1n,PUTwm1,pfree,0, /* PUT_m_ COMMAn */
PUT_m_,go|p1,COMMAn,go|m1,swv|p1,0},
seq15[] = {0,GETw1p,PUSH1,pfree,0, /* PUSHp */
go|p1,PUSHp,gv|m1,0},
seq16[] = {0,GETw1s,GETw2n,ADD12,MOVE21,0, /* GETw2s ADD2n */
go|p3,ADD2n,gv|m2,go|m1,GETw2s,gv|m2,0},
seq17[] = {0,GETw1s,GETw2s,SWAP12,0, /* GETw2s GETw1s */
go|p2,GETw1s,gv|m1,go|m1,GETw2s,gv|m1,0},
seq18[] = {0,GETw1s,MOVE21,0, /* GETw2s */
go|p1,GETw2s,gv|m1,0},
seq19[] = {0,GETw2m,GETw1n,SWAP12,SUB12,0, /* GETw1m SUB1n */
go|p3,SUB1n,gv|m2,go|m1,GETw1m,gv|m2,0},
seq20[] = {0,GETw2n,ADD12,0, /* ADD1n */
go|p1,ADD1n,gv|m1,0},
seq21[] = {0,GETw2s,GETw1n,SWAP12,SUB12,0, /* GETw1s SUB1n */
go|p3,SUB1n,gv|m2,go|m1,GETw1s,gv|m2,0},
seq22[] = {0,rINC1,PUTbm1,rDEC1,0, /* ADDm_ COMMAn */
go|p1,ADDm_,go|p1,COMMAn,go|m1,0},
seq23[] = {0,rINC1,PUTwm1,rDEC1,0, /* ADDm_ COMMAn */
go|p1,ADDm_,go|p1,COMMAn,go|m1,0},
seq24[] = {0,rINC1,PUTbp1,rDEC1,0, /* ADDbpn or INCbp */
go|p2,ife|p1,INCbp,0,ADDbpn,0},
seq25[] = {0,rINC1,PUTwp1,rDEC1,0, /* ADDwpn or INCwp */
go|p2,ife|p1,INCwp,0,ADDwpn,0},
seq26[] = {0,MOVE21,GETw1n,SWAP12,SUB12,0, /* SUB1n */
go|p3,SUB1n,gv|m2,0},
seq27[] = {0,MOVE21,GETw1n,comm,0, /* GETw2n comm */
go|p1,GETw2n,0},
seq28[] = {0,POINT1m,GETw2n,ADD12,MOVE21,0, /* POINT2m_ PLUSn */
go|p3,PLUSn,gv|m2,go|m1,POINT2m_,gv|m2,0},
seq29[] = {0,POINT1m,MOVE21,pfree,0, /* POINT2m */
go|p1,POINT2m,gv|m1,0},
seq30[] = {0,POINT1m,PUSH1,pfree,_pop,0, /* ... POINT2m */
topop|POINT2m,go|p2,0},
seq31[] = {0,POINT1s,GETw2n,ADD12,MOVE21,0, /* POINT2s */
sum|p1,go|p3,POINT2s,gv|m3,0},
seq32[] = {0,POINT1s,PUSH1,MOVE21,0, /* POINT2s PUSH2 */
go|p1,POINT2s,gv|m1,go|p1,PUSH2,go|m1,0},
seq33[] = {0,POINT1s,PUSH1,pfree,_pop,0, /* ... POINT2s */
topop|POINT2s,go|p2,0},
seq34[] = {0,POINT1s,MOVE21,0, /* POINT2s */
go|p1,POINT2s,gv|m1,0},
seq35[] = {0,POINT2m,GETb1p,sfree,0, /* GETb1m */
go|p1,GETb1m,gv|m1,0},
seq36[] = {0,POINT2m,GETb1pu,sfree,0, /* GETb1mu */
go|p1,GETb1mu,gv|m1,0},
seq37[] = {0,POINT2m,GETw1p,sfree,0, /* GETw1m */
go|p1,GETw1m,gv|m1,0},
seq38[] = {0,POINT2m_,PLUSn,GETw1p,sfree,0, /* GETw1m_ PLUSn */
go|p2,gc|m1,gv|m1,go|m1,GETw1m_,gv|m1,0},
seq39[] = {0,POINT2s,GETb1p,sfree,0, /* GETb1s */
sum|p1,go|p1,GETb1s,gv|m1,0},
seq40[] = {0,POINT2s,GETb1pu,sfree,0, /* GETb1su */
sum|p1,go|p1,GETb1su,gv|m1,0},
seq41[] = {0,POINT2s,GETw1p,PUSH1,pfree,0, /* PUSHs */
sum|p1,go|p2,PUSHs,gv|m2,0},
seq42[] = {0,POINT2s,GETw1p,sfree,0, /* GETw1s */
sum|p1,go|p1,GETw1s,gv|m1,0},
seq43[] = {0,PUSH1,any,POP2,0, /* MOVE21 any */
go|p2,gc|m1,gv|m1,go|m1,MOVE21,0},
seq44[] = {0,PUSHm,_pop,0, /* ... GETw2m */
topop|GETw2m,go|p1,0},
seq45[] = {0,PUSHp,any,POP2,0, /* GETw2p ... */
go|p2,gc|m1,gv|m1,go|m1,GETw2p,gv|m1,0},
seq46[] = {0,PUSHs,_pop,0, /* ... GETw2s */
topop|GETw2s,go|p1,0},
seq47[] = {0,SUB1n,0, /* rDEC1 or rINC1 ? */
ifl|m2,0,ifl|0,rINC1,neg,0,ifl|p3,rDEC1,0,0};
#define HIGH_SEQ 47
int seq[HIGH_SEQ + 1];
setseq() {
seq[ 0] = seq00; seq[ 1] = seq01; seq[ 2] = seq02; seq[ 3] = seq03;
seq[ 4] = seq04; seq[ 5] = seq05; seq[ 6] = seq06; seq[ 7] = seq07;
seq[ 8] = seq08; seq[ 9] = seq09; seq[10] = seq10; seq[11] = seq11;
seq[12] = seq12; seq[13] = seq13; seq[14] = seq14; seq[15] = seq15;
seq[16] = seq16; seq[17] = seq17; seq[18] = seq18; seq[19] = seq19;
seq[20] = seq20; seq[21] = seq21; seq[22] = seq22; seq[23] = seq23;
seq[24] = seq24; seq[25] = seq25; seq[26] = seq26; seq[27] = seq27;
seq[28] = seq28; seq[29] = seq29; seq[30] = seq30; seq[31] = seq31;
seq[32] = seq32; seq[33] = seq33; seq[34] = seq34; seq[35] = seq35;
seq[36] = seq36; seq[37] = seq37; seq[38] = seq38; seq[39] = seq39;
seq[40] = seq40; seq[41] = seq41; seq[42] = seq42; seq[43] = seq43;
seq[44] = seq44; seq[45] = seq45; seq[46] = seq46; seq[47] = seq47;
}
/***************** assembly-code strings ******************/
int code[PCODES];
/*
** First byte contains flag bits indicating:
** the value in ax is needed (010) or zapped (020)
** the value in bx is needed (001) or zapped (002)
*/
setcodes() {
setseq();
code[ADD12] = "\211ADD EAX,EBX\15\n";
code[ADD1n] = "\010?ADD EAX,<n>\15\n??";
code[ADD21] = "\211ADD EBX,EAX\15\n";
code[ADD2n] = "\010?ADD EBX,<n>\15\n??";
code[ADDbpn] = "\001ADD BYTE [EBX],<n>\15\n";
code[ADDwpn] = "\001ADD WORD [EBX],<n>\15\n";
code[ADDm_] = "\000ADD <m>";
code[ADDSP] = "\000?ADD ESP,<n>\15\n??";
code[AND12] = "\211AND EAX,EBX\15\n";
code[ANEG1] = "\010NEG EAX\15\n";
code[ARGCNTn] = "\000?MOV CL,<n>?XOR CL,CL?\15\n";
code[ASL12] = "\011MOV ECX,EAX\15\nMOV EAX,EBX\15\nSAL EAX,CL\15\n";
code[ASR12] = "\011MOV ECX,EAX\15\nMOV EAX,EBX\15\nSAR EAX,CL\15\n";
code[CALL1] = "\010CALL EAX\15\n";
code[CALLm] = "\020CALL <m>\15\n";
code[BYTE_] = "\000 DB ";
code[BYTEn] = "\000 RESB <n>\15\n";
code[BYTEr0] = "\000 TIMES <n> DB 0\15\n";
code[COM1] = "\010NOT EAX\15\n";
code[COMMAn] = "\000,<n>\15\n";
code[DBL1] = "\010SHL EAX,1\15\n";
code[DBL2] = "\001SHL EBX,1\15\n";
code[DECbp] = "\001DEC BYTE [EBX]\15\n";
code[DECwp] = "\001DEC WORD [EBX]\15\n";
code[DIV12] = "\011CDQ\15\nIDIV EBX\15\n"; /* see gen() */
code[DIV12u] = "\011XOR EDX,EDX\15\nDIV EBX\15\n"; /* see gen() */
code[DWORD_] = "\000 DD ";
code[DWORDn] = "\000 DD <n>\15\n";
code[DWORDr0] = "\000 TIMES <n> DD 0\15\n";
code[ENTER] = "\100PUSH EBP\15\nMOV EBP,ESP\15\n";
code[EQ10f] = "\010<g>OR EAX,EAX\15\nJE _<d>\15\nJMP _<n>\15\n_<d>:\15\n";
code[EQ12] = "\211CALL __eq\15\n";
code[GE10f] = "\010<g>OR EAX,EAX\15\nJGE _<d>\15\nJMP _<n>\15\n_<d>:\15\n";
code[GE12] = "\011CALL __ge\15\n";
code[GE12u] = "\011CALL __uge\15\n";
code[GETb1m] = "\020MOVSX EAX,BYTE [<m>]\15\n";
code[GETb1mu] = "\020MOVZX EAX,BYTE [<m>]\15\n";
code[GETb1p] = "\021MOVSX EAX,BYTE [EBX?<o>??]\15\n"; /* see gen() */
code[GETb1pu] = "\021MOVZX EAX,BYTE [EBX?<o>??]\15\n"; /* see gen() */
code[GETb1s] = "\020MOVSX EAX,BYTE [EBP<o>]\15\n";
code[GETb1su] = "\020MOVZX EAX,BYTE [EBP<o>]\15\n";
code[GETd1m] = "\020MOV EAX,[<m>]\15\n";
code[GETd1n] = "\020?MOV EAX,<n>?XOR EAX,EAX?\15\n";
code[GETd1p] = "\021MOV EAX, [EBX?<o>??]\15\n"; /* see gen() */
code[GETd2n] = "\002?MOV EBX,<n>?XOR EBX,EBX?\15\n";
code[GETw1m] = "\020MOVSX EAX,WORD [<m>]\15\n";
code[GETw1m_] = "\020MOVSX EAX,WORD [<m>]";
code[GETw1n] = "\020?MOV EAX,<n>?XOR EAX,EAX?\15\n";
code[GETw1p] = "\021MOVSX EAX, WORD [EBX?<o>??]\15\n"; /* see gen() */
code[GETw1s] = "\020MOVSX EAX, WORD [EBP<o>]\15\n";
code[GETw2m] = "\002MOVSX EBX,WORD <m>\15\n";
code[GETw2n] = "\002?MOV EBX,<n>?XOR EBX,EBX?\15\n";
code[GETw2p] = "\021MOVSX EBX,WORD [EBX?<o>??]\15\n";
code[GETw2s] = "\002MOVSX EBX,WORD [EBP<o>]\15\n";
code[GT10f] = "\010<g>OR EAX,EAX\15\nJG _<d>\15\nJMP _<n>\15\n_<d>:\15\n";
code[GT12] = "\010CALL __gt\15\n";
code[GT12u] = "\011CALL __ugt\15\n";
code[INCbp] = "\001INC BYTE [EBX]\15\n";
code[INCwp] = "\001INC WORD [EBX]\15\n";
code[WORD_] = "\000 DW ";
code[WORDn] = "\000 RESW <n>\15\n";
code[WORDr0] = "\000 TIMES <n> DW 0\15\n";
code[JMPm] = "\000JMP _<n>\15\n";
code[LABm] = "\000_<n>:\15\n";
code[LE10f] = "\010<g>OR EAX,EAX\15\nJLE _<d>\15\nJMP _<n>\15\n_<d>:\15\n";
code[LE12] = "\011CALL __le\15\n";
code[LE12u] = "\011CALL __ule\15\n";
code[LNEG1] = "\010CALL __lneg\15\n";
code[LT10f] = "\010<g>OR EAX,EAX\15\nJL _<d>\15\nJMP _<n>\15\n_<d>:\15\n";
code[LT12] = "\011CALL __lt\15\n";
code[LT12u] = "\011CALL __ult\15\n";
code[MOD12] = "\011CDQ\15\nIDIV EBX\15\nMOV EAX,EDX\15\n"; /* see gen() */
code[MOD12u] = "\011XOR EDX,EDX\15\nDIV EBX\15\nMOV EAX,EDX\15\n"; /* see gen() */
code[MOVE21] = "\012MOV EBX,EAX\15\n";
code[MUL12] = "\211IMUL EBX\15\n";
code[MUL12u] = "\211MUL EBX\15\n";
code[NE10f] = "\010<g>OR EAX,EAX\15\nJNE _<d>\15\nJMP _<n>\15\n_<d>:\15\n";
code[NE12] = "\211CALL __ne\15\n";
code[NEARm] = "\000 DD _<n>\15\n";
code[OR12] = "\211OR EAX,EBX\15\n";
code[PLUSn] = "\000?+<n>??\15\n";
code[POINT1l] = "\020MOV EAX,_<l>+<n>\15\n";
code[POINT1m] = "\020MOV EAX,<m>\15\n";
code[POINT1s] = "\020LEA EAX,[EBP<o>]\15\n";
code[POINT2m] = "\002MOV EBX,<m>\15\n";
code[POINT2m_]= "\002MOV EBX,<m>";
code[POINT2s] = "\002LEA EBX,[EBP<o>]\15\n";
code[POP2] = "\002POP EBX\15\n";
code[PUSH1] = "\110PUSH EAX\15\n";
code[PUSH2] = "\101PUSH EBX\15\n";
code[PUSHm] = "\100PUSH <m>\15\n";
code[PUSHp] = "\100PUSH [EBX?<o>??]\15\n";
code[PUSHs] = "\100PUSH [EBP?<o>??]\15\n";
code[PUT_m_] = "\000MOV <m>";
code[PUTbm1] = "\010MOV BYTE [<m>],AL\15\n";
code[PUTbp1] = "\011MOV [EBX],AL\15\n";
code[PUTdm1] = "\010MOV DWORD [<m>],EAX\15\n";
code[PUTdp1] = "\011MOV [EBX],EAX\15\n";
code[PUTwm1] = "\010MOV WORD [<m>],AX\15\n";
code[PUTwp1] = "\011MOV [EBX],AX\15\n";
code[rDEC1] = "\010#DEC EAX\15\n#";
code[rDEC2] = "\010#DEC EBX\15\n#";
code[REFm] = "\000_<n>";
code[RETURN] = "\000?MOV ESP,EBP\15\n??POP EBP\15\nRET\15\n";
code[rINC1] = "\010#INC EAX\15\n#";
code[rINC2] = "\010#INC EBX\15\n#";
code[SUB_m_] = "\000SUB <m>";
code[SUB12] = "\011SUB EAX,EBX\15\n"; /* see gen() */
code[SUB1n] = "\010?SUB EAX,<n>\15\n??";
code[SUBbpn] = "\001SUB [EBX],<n>\15\n";
code[SUBwpn] = "\001SUB [EBX],<n>\15\n";
code[SWAP12] = "\011XCHG EAX,EBX\15\n";
code[SWAP1s] = "\012POP EBX\15\nXCHG EAX,EBX\15\nPUSH EBX\15\n";
code[SWITCH] = "\012CALL __switch\15\n";
code[XOR12] = "\211XOR EAX,EBX\15\n";
}
/***************** code generation functions *****************/
/*
** print all assembler info before any code is generated
** and ensure that the segments appear in the correct order.
*/
header() {
/* outline(" .386");
outline(" .MODEL FLAT");
*/ toseg(CODESEG);
/* - FASM
outline("EXTERN __eq");
outline("EXTERN __ne");
outline("EXTERN __le");
outline("EXTERN __lt");
outline("EXTERN __ge");
outline("EXTERN __gt");
outline("EXTERN __ule");
outline("EXTERN __ult");
outline("EXTERN __uge");
outline("EXTERN __ugt");
outline("EXTERN __lneg");
outline("EXTERN __switch");
*/
/* outline("dw 0"); *//* force non-zero code pointers, word alignment */
toseg(DATASEG);
/* outline("dw 0"); *//* force non-zero data pointers, word alignment */
}
/*
** print any assembler stuff needed at the end
*/
trailer() {
char *cp;
cptr = STARTGLB;
while(cptr < ENDGLB) {
if(cptr[IDENT] == FUNCTION && cptr[CLASS] == AUTOEXT)
external(cptr + NAME, 0, FUNCTION);
cptr += SYMMAX;
}
/*
if((cp = findglb("main")) && cp[CLASS]==STATIC)
external("_main", 0, FUNCTION);
*/
toseg(NULL);
/* outline("END"); */
#ifdef DISOPT
{
int i, *count;
printf(";opt count\n");
for(i = -1; ++i <= HIGH_SEQ; ) {
count = seq[i];
printf("; %2u %5u\n", i, *count);
}
}
#endif
}
/*
** remember where we are in the queue in case we have to back up.
*/
setstage(before, start) int *before, *start; {
if((*before = snext) == 0)
snext = stage;
*start = snext;
}
/*
** generate code in staging buffer.
*/
gen(pcode, value)
int pcode, value;
{
int newcsp;
switch(pcode)
{
case GETb1pu:
case GETb1p:
case GETw1p:
case GETd1p:
gen(MOVE21, 0);
break;
case SUB12:
case MOD12:
case MOD12u:
case DIV12:
case DIV12u:
gen(SWAP12, 0);
break;
case PUSH1:
#ifdef INT32
csp -= BPD;
#else
csp -= BPW;
#endif
break;
case POP2:
#ifdef INT32
csp += BPD;
#else
csp += BPW;
#endif
break;
case ADDSP:
case RETURN:
newcsp = value;
value -= csp;
csp = newcsp;
}
if(snext == 0)
{
outcode(pcode, value);
return;
}
if(snext >= slast)
{
error("staging buffer overflow");
return;
}
snext[0] = pcode;
snext[1] = value;
snext += 2;
}
/*
** dump the contents of the queue.
** If start = 0, throw away contents.
** If before != 0, don't dump queue yet.
*/
clearstage(before, start)
int *before, *start;
{
if(before)
{
snext = before;
return;
}
if(start)
dumpstage();
snext = 0;
}
/*
** dump the staging buffer
*/
dumpstage()
{
int i;
stail = snext;
snext = stage;
while(snext < stail)
{
if(optimize)
{
restart:
i = -1;
while(++i <= HIGH_SEQ)
if(peep(seq[i]))
{
#ifdef DISOPT
if(isatty(output))
fprintf(stderr, " optimized %2u\n", i);
#endif
goto restart;
}
}
outcode(snext[0], snext[1]);
snext += 2;
}
}
/*
** change to a new segment
** may be called with NULL, CODESEG, or DATASEG
** With NASM the section names are case-sensitive
*/
toseg(newseg)
int newseg;
{
if(oldseg == newseg)
return;
/* if(oldseg == CODESEG)
outline("_TEXT ENDS");
else if(oldseg == DATASEG)
outline("_DATA ENDS"); <-- */
/* - FASM
if(newseg == CODESEG)
{
outline("SECTION .text");
}
else if(newseg == DATASEG)
outline("SECTION .data");
*/
oldseg = newseg;
}
/*
** declare entry point
*/
public(ident) int ident;{
if(ident == FUNCTION)
toseg(CODESEG);
else toseg(DATASEG);
/* - FASM
outstr("GLOBAL ");
outname(ssname);
*/
newline();
outname(ssname);
if(ident == FUNCTION) {
colon();
newline();
}
}
/*
** declare external reference
*/
external(name, size, ident) char *name; int size, ident; {
if(ident == FUNCTION)
toseg(CODESEG);
else toseg(DATASEG);
/* - FASM
outstr("EXTERN ");
outname(name);
/# colon();
outsize(size, ident); <-- #/
newline();
*/
}
/*
** output the size of the object pointed to.
*/
outsize(size, ident) int size, ident;
{
/* why not size on FUNCTION and POINTER ? */
if (ident == FUNCTION)
outstr("NEAR");
else if (ident == POINTER)
outstr("DWORD");
else if(size == 1)
outstr("BYTE");
else if(size == 2)
outstr("WORD");
else
outstr("DWORD");
}
/*
** point to following object(s)
*/
point() {
outline(" DW $+2");
}
/*
** dump the literal pool
*/
dumplits(size) int size;
{
int j, k;
k = 0;
while (k < litptr)
{
if(size == 1)
{
gen(BYTE_, NULL);
}
else if (size == 2)
{
gen(WORD_, NULL);
}
else
{
gen(DWORD_,NULL);
}
j = 10;
while(j--)
{
outdec(getint(litq + k, size));
k += size;
if(j == 0 || k >= litptr)
{
newline();
break;
}
fputc(',', output);
}
}
}
/*
** dump zeroes for default initial values
*/
dumpzero(size, count)
int size, count;
{
if(count > 0)
{
if(size == 1)
gen(BYTEr0, count);
else if (size == 2)
gen(WORDr0, count);
else
gen(DWORDr0, count);
}
}
/******************** optimizer functions ***********************/
/*
** Try to optimize sequence at snext in the staging buffer.
*/
peep(seq) int *seq; {
int *next, *count, *pop, n, skip, tmp, reply;
char c;
next = snext;
count = seq++;
while(*seq) {
switch(*seq) {
case any: if(next < stail) break; return (NO);
case pfree: if(isfree(PRI, next)) break; return (NO);
case sfree: if(isfree(SEC, next)) break; return (NO);
case comm: if(*next & COMMUTES) break; return (NO);
case _pop: if(pop = getpop(next)) break; return (NO);
default: if(next >= stail || *next != *seq) return (NO);
}
next += 2; ++seq;
}
/****** have a match, now optimize it ******/
*count += 1;
reply = skip = NO;
while(*(++seq) || skip) {
if(skip) {
if(*seq == 0) skip = NO;
continue;
}
if(*seq >= PCODES) {
c = *seq & 0xFF; /* get low byte of command */
n = c; /* and sign extend into n */
switch(*seq & 0xFF00) {
case ife: if(snext[1] != n) skip = YES; break;
case ifl: if(snext[1] >= n) skip = YES; break;
case go: snext += (n<<1); break;
case gc: snext[0] = snext[(n<<1)]; goto done;
case gv: snext[1] = snext[(n<<1)+1]; goto done;
case sum: snext[1] += snext[(n<<1)+1]; goto done;
case neg: snext[1] = -snext[1]; goto done;
case topop: pop[0] = n; pop[1] = snext[1]; goto done;
case swv: tmp = snext[1];
snext[1] = snext[(n<<1)+1];
snext[(n<<1)+1] = tmp;
done: reply = YES;
break;
}
}
else snext[0] = *seq; /* set p-code */
}
return (reply);
}
/*
** Is the primary or secondary register free?
** Is it zapped or unused by the p-code at pp
** or a successor? If the primary register is
** unused by it still may not be free if the
** context uses the value of the expression.
*/
isfree(reg, pp) int reg, *pp; {
char *cp;
while(pp < stail) {
cp = code[*pp];
if(*cp & USES & reg) return (NO);
if(*cp & ZAPS & reg) return (YES);
pp += 2;
}
if(usexpr) return (reg & 001); /* PRI => NO, SEC => YES at end */
else return (YES);
}
/*
** Get place where the currently pushed value is popped?
** NOTE: Function arguments are not popped, they are
** wasted with an ADDSP.
*/
getpop(next) int *next; {
char *cp;
int level; level = 0;
while(YES) {
if(next >= stail) /* compiler error */
return 0;
if(*next == POP2)
if(level) --level;
else return next; /* have a matching POP2 */
else if(*next == ADDSP) { /* after func call */
if((level -= (next[1]>>LBPW)) < 0)
return 0;
}
else {
cp = code[*next]; /* code string ptr */
if(*cp & PUSHES) ++level; /* must be a push */
}
next += 2;
}
}
/******************* output functions *********************/
colon() {
fputc(':', output);
}
newline() {
fputc('\15', output);
fputc(NEWLINE, output);
}
/*
** output assembly code.
**
*/
outcode(pcode, value)
int pcode, value;
{
int part, skip, count;
int byte_opt;
char *cp, *back;
int loc_label;
part = back = 0;
skip = NO;
byte_opt = 0;
cp = code[pcode] + 1; /* skip 1st byte of code string */
#ifdef _MSC_VER
switch (pcode)
{
case BYTE_:
case BYTEn:
case BYTEr0:
case WORD_:
case WORDn:
case WORDr0:
case DWORD_:
case DWORDn:
case DWORDr0:
case REFm:
case COMMAn:
case PLUSn:
break;
default:
dump_debug (pcode, value);
outtab ();
}
#endif
if (pcode == ADD1n)
{
if (value < 0)
{
pcode = SUB1n;
value = -value;
}
if (value < 128)
{
byte_opt = 1;
}
}
while(*cp)
{
if(*cp == '<')
{
++cp; /* skip to action code */
if(skip == NO)
switch(*cp)
{
case 'm':
outname(value+NAME);
break; /* mem ref by label */
case 'n':
if (byte_opt)
{
outstr ("BYTE ");
}
outdec(value);
break; /* numeric constant */
case 'o':
offset(value);
break; /* numeric constant */
case 'l':
outdec(litlab);
break; /* current literal label */
case 'g': /* generate local label */
loc_label = getlabel ();
break;
case 'd': /* dump local label */
outdec(loc_label);
break;
}
cp += 2; /* skip past > */
}
else if(*cp == '?') /* ?..if value...?...if not value...? */
{
switch(++part)
{
case 1:
if(value == 0)
skip = YES;
break;
case 2:
skip = !skip;
break;
case 3:
part = 0;
skip = NO;
break;
}
++cp; /* skip past ? */
}
else if(*cp == '#')
{ /* repeat #...# value times */
++cp;
if(back == 0)
{
if((count = value) < 1)
{
while(*cp && *cp++ != '#')
;
continue;
}
back = cp;
continue;
}
if(--count > 0)
cp = back;
else
back = 0;
}
else if(skip == NO)
fputc(*cp++, output);
else
++cp;
}
}
outdec(number) int number; {
int k, zs;
char c, *q, *r;
zs = 0;
k = 1000000000;
#ifdef _MSC_VER
// fprintf(output, "/* %d */", number);
#endif
if(number < 0) {
number = -number;
fputc('-', output);
}
while (k >= 1) {
q = 0;
r = number;
while(r >= k) {++q; r = r - k;}
c = q + '0';
if(c != '0' || k == 1 || zs) {
zs = 1;
fputc(c, output);
}
number = r;
k /= 10;
}
}
offset(number)
int number;
{
int k, zs;
char c, *q, *r;
zs = 0;
k = 1000000000;
if(number < 0) {
number = -number;
fputc('-', output);
}
else
{
fputc('+',output);
}
while (k >= 1) {
q = 0;
r = number;
while(r >= k) {++q; r = r - k;}
c = q + '0';
if(c != '0' || k == 1 || zs) {
zs = 1;
fputc(c, output);
}
number = r;
k /= 10;
}
}
outline(ptr) char ptr[]; {
outstr(ptr);
newline();
}
outname(ptr) char ptr[]; {
outstr("_");
while(*ptr >= ' ') fputc(*ptr++, output);
}
outstr(ptr) char ptr[]; {
while(*ptr == '\t' || *ptr >= ' ') fputc(*ptr++, output);
}
outtab ()
{
fputc ('\t', output);
}