1
0
kolibrios/programs/develop/tinypad/trunk/tp-key.asm
Mihail Semenyako (mike.dld) 7e149d6d99 tinypad: 4GB line length limit; settings in INI file; bugfixes
git-svn-id: svn://kolibrios.org@987 a494cfbc-eb01-0410-851d-a64ba20cac60
2008-12-29 19:08:59 +00:00

1635 lines
39 KiB
NASM

diff16 'tp-key.asm',0,$
key:
mov ecx,1
mcall 66,3
mov [shi],eax
xor ebx,ebx
test al,0x03
jz @f
or ebx,KM_SHIFT
@@: test al,0x0C
jz @f
or ebx,KM_CTRL
@@: test al,0x30
jz @f
or ebx,KM_ALT
@@: mov edx,ebx
test al,0x03
jz @f
inc cl
@@:
mcall 2
cmp al,0
jne still.skip_write
shr eax,8
cmp al,224
jne @f
mov [ext],0x01
jmp still.skip_write
@@: cmp al,225
jne @f
mov [ext],0x02
jmp still.skip_write
@@:
mov ah,[ext]
mov [ext],0
mov esi,numpad_table_off
test [shi], 0x00000080 ; NumLock is on?
jz .num
mov esi,numpad_table_on
.num: cmp eax,[esi]
jne @f
mov eax,[esi+4]
mov ebx,eax
or eax,edx
shr ebx,8
or ebx,0x0000FFFF
and eax,ebx
mov ecx,eax
shr ecx,16
and cl,1
inc cl
jmp .lp0
@@: add esi,8
cmp dword[esi],0
jne .num
or eax,edx
.lp0: test al,0x80
jnz still.skip_write
push eax
mcall 26,2,,key1
pop eax
mov [chr],eax
cmp [bot_mode],0
je @f
mov ebx,eax
mov al,2
call [bot_dlg_handler]
jmp still
@@:
mov esi,accel_table_main
.acc: cmp eax,[esi]
jne @f
test [secure_sel],1
jz .lp1
m2m [cur_editor.SelStart.X],[cur_editor.Caret.X]
m2m [cur_editor.SelStart.Y],[cur_editor.Caret.Y]
.lp1: mov [s_status],0
call dword[esi+4]
call editor_check_for_changes
jmp still
@@: add esi,8
cmp dword[esi],0
jne .acc
test [chr],KM_CTRLALT
jnz still.skip_write
mov [s_status],0
movzx eax,byte[chr]
movzx eax,[eax+key0]
or al,al
jz still.skip_write
movzx eax,[eax+key1]
push eax
test [secure_sel],1
jz .lp2
m2m [cur_editor.SelStart.X],[cur_editor.Caret.X]
m2m [cur_editor.SelStart.Y],[cur_editor.Caret.Y]
jmp .put
.lp2: call delete_selection
test [auto_braces],1
jz .put
cmp al,'['
jne @f
mov al,']'
call .lp3
dec [cur_editor.Caret.X]
jmp .put
@@: cmp al,'('
jne @f
mov al,')'
call .lp3
dec [cur_editor.Caret.X]
jmp .put
@@: cmp al,'{'
jne .put
mov al,'}'
call .lp3
dec [cur_editor.Caret.X]
.put: pop eax
push still editor_check_for_changes
inc [cur_editor.SelStart.X]
.lp3: push [cur_editor.Caret.X] eax
inc dword[esp+4]
mov eax,1
jmp key.tab.direct
;-----------------------------------------------------------------------------
proc key.ctrl_a ;///// SELECT ALL DOCUMENT ///////////////////////////////////
;-----------------------------------------------------------------------------
xor eax,eax
mov [cur_editor.SelStart.X],eax
mov [cur_editor.SelStart.Y],eax
mov ecx,[cur_editor.Lines.Count]
dec ecx
mov [cur_editor.Caret.Y],ecx
call get_line_offset
call get_real_length
mov [cur_editor.Caret.X],eax
call draw_editor
ret
endp
;-----------------------------------------------------------------------------
proc key.ctrl_o ;///// ENTER OPEN FILENAME ///////////////////////////////////
;-----------------------------------------------------------------------------
mov [bot_mode2],0
.direct:
cmp [bot_mode2], 2
je .ask
mov [s_status],s_enter_filename
jmp .ask1
.ask:
mov [s_status],s_ask_save
.ask1:
mov [bot_mode],1
mov [bot_dlg_height],16*2+4*2-1
mov [bot_dlg_handler],osdlg_handler
mov [focused_tb],tb_opensave
@@: mov al,[tb_opensave.length]
mov [tb_opensave.pos.x],al
mov [tb_opensave.sel.x],0
mov [tb_casesen],0;1
call drawwindow
ret
endp
;-----------------------------------------------------------------------------
proc key.ctrl_s ;///// ENTER SAVE FILENAME ///////////////////////////////////
;-----------------------------------------------------------------------------
cmp [cur_editor.FilePath], 0
je key.shift_ctrl_s
cmp [cur_editor.Modified],0
je .exit
call save_file
call drawwindow
.exit:
ret
key.shift_ctrl_s:
mov [bot_mode2],1
jmp key.ctrl_o.direct
endp
;-----------------------------------------------------------------------------
proc key.ctrl_n ;///// CREATE NEW FILE (TAB) /////////////////////////////////
;-----------------------------------------------------------------------------
call create_tab
ret
endp
;-----------------------------------------------------------------------------
proc key.ctrl_f ;///// ENTER KEYWORD TO FIND /////////////////////////////////
;-----------------------------------------------------------------------------
mov [bot_mode2],0
mov [bot_dlg_height],16*2+4*2-1
mov [s_status],s_enter_text_to_find
.direct:
mov [bot_mode],1
mov [bot_dlg_handler],finddlg_handler
mov [focused_tb],tb_find
mov ecx,[s_search.size]
mov [tb_find.length],cl
jecxz @f
mov esi,s_search
mov edi,tb_find.text
cld
rep movsb
@@: mov al,[tb_find.length]
mov [tb_find.pos.x],al
mov [tb_find.sel.x],0
mov [tb_casesen],0
call drawwindow
ret
endp
proc key.ctrl_h
mov [bot_mode2],1
mov [bot_dlg_height],16*3+4*2+1
mov [s_status],s_enter_text_to_replace
jmp key.ctrl_f.direct
endp
proc key.ctrl_g
ret
@^
mov [bot_mode2],0
mov [bot_dlg_height],16*2+4*2-1
mov [bot_mode],1
mov [bot_dlg_handler],gotodlg_handler
mov [focused_tb],tb_gotorow
mov al,[tb_gotorow.length]
mov [tb_gotorow.pos.x],al
mov [tb_gotorow.sel.x],0
mov [tb_casesen],0
call drawwindow
ret
^@
endp
;-----------------------------------------------------------------------------
proc key.ctrl_left ;///// GO TO PREVIOUS WORD ////////////////////////////////
;-----------------------------------------------------------------------------
call clear_selection
;-----------------------------------------------------------------------------
key.shift_ctrl_left: ;///// GO TO PREVIOUS WORD, WITH SELECTION /////////
;-----------------------------------------------------------------------------
mov ebx,[cur_editor.Caret.Y]
mov edx,[cur_editor.Caret.X]
cld
mov ecx,ebx
call get_line_offset
.lp1: cmp edx,[esi+EDITOR_LINE_DATA.Size]
jle @f
mov edx,[esi+EDITOR_LINE_DATA.Size]
@@: dec edx
jl .nx1
add esi,sizeof.EDITOR_LINE_DATA
add esi,edx
mov ecx,edx
@@: push ecx
mov edi,symbols_ex
mov ecx,symbols_ex.size+symbols.size
mov al,[esi]
dec esi
repne scasb
pop ecx
jne @f
dec edx
dec ecx
jnz @b
.nx1: dec ebx
js .exit.2
mov ecx,ebx
call get_line_offset
mov edx,[esi+EDITOR_LINE_DATA.Size]
dec edx
jmp .lp1
@@:
mov ecx,ebx
call get_line_offset
.lp2: cmp edx,[esi+EDITOR_LINE_DATA.Size]
jle @f
mov edx,[esi+EDITOR_LINE_DATA.Size]
@@: or edx,edx
jl .nx2
add esi,sizeof.EDITOR_LINE_DATA
add esi,edx
@@: mov edi,symbols_ex
mov ecx,symbols_ex.size+symbols.size
mov al,[esi]
dec esi
repne scasb
je @f
dec edx
jns @b
jmp @f
.nx2: dec ebx
js .exit.2
mov ecx,ebx
call get_line_offset
mov edx,[esi+EDITOR_LINE_DATA.Size]
dec edx
jmp .lp2
@@:
inc edx
mov [cur_editor.Caret.Y],ebx
mov [cur_editor.Caret.X],edx
test [chr],KM_SHIFT
jnz @f
mov [cur_editor.SelStart.Y],ebx
mov [cur_editor.SelStart.X],edx
@@: sub ebx,[cur_editor.TopLeft.Y]
jge @f
add [cur_editor.TopLeft.Y],ebx
@@: mov eax,edx
sub eax,[cur_editor.TopLeft.X]
cmp eax,[columns.scr]
jl @f
sub eax,[columns.scr]
inc eax
add [cur_editor.TopLeft.X],eax
jmp .exit
@@: cmp edx,[cur_editor.TopLeft.X]
jge .exit
mov [cur_editor.TopLeft.X],edx
.exit:
call editor_check_for_changes
.exit.2:
ret
endp
;-----------------------------------------------------------------------------
proc key.ctrl_right ;///// GO TO NEXT WORD ///////////////////////////////////
;-----------------------------------------------------------------------------
call clear_selection
;-----------------------------------------------------------------------------
key.shift_ctrl_right: ;///// GO TO NEXT WORD, WITH SELECTION ////////////
;-----------------------------------------------------------------------------
mov ebx,[cur_editor.Caret.Y]
mov edx,[cur_editor.Caret.X]
cld
.lp1: mov ecx,ebx
call get_line_offset
mov ecx,[esi+EDITOR_LINE_DATA.Size]
cmp edx,ecx
jge .nx1
add esi,sizeof.EDITOR_LINE_DATA
add esi,edx
sub ecx,edx
@@: push ecx
mov edi,symbols_ex
mov ecx,symbols_ex.size+symbols.size
lodsb
repne scasb
pop ecx
je @f
inc edx
dec ecx
jnz @b
.nx1: inc ebx
cmp ebx,[cur_editor.Lines.Count]
jge .exit.2
xor edx,edx
jmp .lp1
@@:
.lp2: mov ecx,ebx
call get_line_offset
mov ecx,[esi+EDITOR_LINE_DATA.Size]
cmp edx,ecx
jge .nx2
add esi,sizeof.EDITOR_LINE_DATA
add esi,edx
sub ecx,edx
@@: push ecx
mov edi,symbols_ex
mov ecx,symbols_ex.size+symbols.size
lodsb
repne scasb
pop ecx
jne @f
inc edx
dec ecx
jnz @b
.nx2: inc ebx
cmp ebx,[cur_editor.Lines.Count]
jge .exit.2
xor edx,edx
jmp .lp2
@@:
mov [cur_editor.Caret.Y],ebx
mov [cur_editor.Caret.X],edx
test [chr],KM_SHIFT
jnz @f
mov [cur_editor.SelStart.Y],ebx
mov [cur_editor.SelStart.X],edx
@@: sub ebx,[cur_editor.TopLeft.Y]
cmp ebx,[lines.scr]
jl @f
sub ebx,[lines.scr]
inc ebx
add [cur_editor.TopLeft.Y],ebx
@@: mov eax,edx
sub eax,[cur_editor.TopLeft.X]
cmp eax,[columns.scr]
jl @f
sub eax,[columns.scr]
inc eax
add [cur_editor.TopLeft.X],eax
jmp .exit
@@: cmp edx,[cur_editor.TopLeft.X]
jge .exit
mov [cur_editor.TopLeft.X],edx
.exit:
call editor_check_for_changes
.exit.2:
ret
endp
;-----------------------------------------------------------------------------
proc key.ctrl_x
cmp [sel.selected],0
je @f
call key.ctrl_c
call key.del
mov [cur_editor.Modified],1
@@: ret
endp
;-----------------------------------------------------------------------------
proc key.ctrl_c
mov [copy_size],0
cmp [sel.selected],0
je .exit
call get_selection_size
stdcall mem.ReAlloc,[copy_buf],eax
mov [copy_buf],eax
cld
mov eax,[sel.begin.y]
cmp eax,[sel.end.y]
je .single_line
mov ecx,[sel.begin.y]
call get_line_offset
inc ecx
push ecx
mov edi,[copy_buf]
call get_real_length
sub eax,[sel.begin.x]
jge @f
xor eax,eax
@@: add esi,[sel.begin.x]
add esi,sizeof.EDITOR_LINE_DATA
mov [edi+EDITOR_LINE_DATA.Size],eax
add edi,sizeof.EDITOR_LINE_DATA
mov ecx,eax
jecxz @f
rep movsb
@@: mov ecx,[sel.end.y]
call get_line_offset
pop ecx
cmp ecx,[sel.end.y]
je @f
mov eax,esi
call get_line_offset
sub eax,esi
mov ecx,eax
rep movsb
mov ecx,[sel.end.y]
@@: call get_line_offset
mov eax,[esi+EDITOR_LINE_DATA.Size]
add esi,sizeof.EDITOR_LINE_DATA
cmp eax,[sel.end.x]
jle @f
mov eax,[sel.end.x]
@@: mov ebx,edi
mov [edi+EDITOR_LINE_DATA.Size],eax
add edi,sizeof.EDITOR_LINE_DATA
mov ecx,eax
jecxz @f
rep movsb
sub eax,[sel.end.x]
jz @f
neg eax
mov ecx,eax
add [ebx],eax
mov al,' '
rep stosb
@@: sub edi,[copy_buf]
mov [copy_size],edi
mov eax,[sel.end.y]
sub eax,[sel.begin.y]
inc eax
mov [copy_count],eax
.exit:
ret
.single_line:
mov eax,[sel.end.x]
sub eax,[sel.begin.x]
mov edi,[copy_buf]
mov [edi+EDITOR_LINE_DATA.Size],eax
add edi,sizeof.EDITOR_LINE_DATA
mov ecx,[sel.begin.y]
call get_line_offset
mov ebx,[sel.begin.x]
mov ecx,[sel.end.x]
cmp ebx,[esi+EDITOR_LINE_DATA.Size]
jge .add_spaces
cmp ecx,[esi+EDITOR_LINE_DATA.Size]
jle .lp1
mov ecx,[esi+EDITOR_LINE_DATA.Size]
.lp1: sub ecx,[sel.begin.x]
sub eax,ecx
lea esi,[esi+ebx+sizeof.EDITOR_LINE_DATA]
rep movsb
.add_spaces:
mov ecx,eax
mov al,' '
jecxz @b
rep stosb
jmp @b
endp
;-----------------------------------------------------------------------------
proc key.ctrl_v
cmp [copy_size],0
je .exit
call delete_selection
mov eax,[copy_size]
call editor_realloc_lines
mov ebx,[cur_editor.Lines.Size]
add ebx,[copy_size]
mov [cur_editor.Lines.Size],ebx
stdcall mem.ReAlloc,[cur_editor.Lines],ebx
mov [cur_editor.Lines],eax
mov ecx,[cur_editor.Caret.Y]
call get_line_offset
pushd [esi+EDITOR_LINE_DATA.Size] esi
mov ecx,[cur_editor.Caret.X]
call line_add_spaces
add [esp],eax
add esi,eax
mov ecx,[copy_size]
sub ecx,sizeof.EDITOR_LINE_DATA
mov edi,[cur_editor.Lines]
add edi,[cur_editor.Lines.Size] ;*** add edi,[edi-4]
dec edi
mov eax,esi
mov esi,edi
sub esi,ecx
lea ecx,[eax+sizeof.EDITOR_LINE_DATA]
add ecx,[cur_editor.Caret.X]
neg ecx
lea ecx,[esi+ecx+1]
std
rep movsb
mov ecx,[copy_count]
dec ecx
jz .single_line
cld
pop edi
add edi,sizeof.EDITOR_LINE_DATA
mov esi,[copy_buf]
mov eax,[esi+EDITOR_LINE_DATA.Size]
add esi,sizeof.EDITOR_LINE_DATA
mov ebx,[cur_editor.Caret.X]
add eax,ebx
mov [edi-sizeof.EDITOR_LINE_DATA+EDITOR_LINE_DATA.Size],eax
mov [edi-sizeof.EDITOR_LINE_DATA+EDITOR_LINE_DATA.Flags],EDITOR_LINE_FLAG_MOFIFIED
sub eax,ebx
call .check_columns
add edi,ebx
@@: push ecx
mov ecx,eax
rep movsb
mov eax,[esi+EDITOR_LINE_DATA.Size]
add esi,sizeof.EDITOR_LINE_DATA
mov [edi+EDITOR_LINE_DATA.Size],eax
mov [edi+EDITOR_LINE_DATA.Flags],EDITOR_LINE_FLAG_MOFIFIED
add edi,sizeof.EDITOR_LINE_DATA
pop ecx
loop @b
pop ecx
sub ecx,ebx
add [edi-sizeof.EDITOR_LINE_DATA+EDITOR_LINE_DATA.Size],ecx
call .check_columns
mov ecx,eax
rep movsb
mov [cur_editor.Caret.X],eax
mov [cur_editor.SelStart.X],eax
mov eax,[copy_count]
dec eax
add [cur_editor.Caret.Y],eax
add [cur_editor.SelStart.Y],eax
add [cur_editor.Lines.Count],eax
mov [cur_editor.Modified],1
jmp .exit
.single_line:
cld
pop edi
add edi,sizeof.EDITOR_LINE_DATA
mov esi,[copy_buf]
mov eax,[esi+EDITOR_LINE_DATA.Size]
add esi,sizeof.EDITOR_LINE_DATA
add [edi-sizeof.EDITOR_LINE_DATA+EDITOR_LINE_DATA.Size],eax
and [edi-sizeof.EDITOR_LINE_DATA+EDITOR_LINE_DATA.Flags],not EDITOR_LINE_FLAG_SAVED
or [edi-sizeof.EDITOR_LINE_DATA+EDITOR_LINE_DATA.Flags],EDITOR_LINE_FLAG_MOFIFIED
call .check_columns
add edi,[cur_editor.Caret.X]
add esp,4
mov ecx,eax
rep movsb
add [cur_editor.Caret.X],eax
add [cur_editor.SelStart.X],eax
mov [cur_editor.Modified],1
.exit:
ret
.check_columns:
push eax
mov eax,[edi-sizeof.EDITOR_LINE_DATA+EDITOR_LINE_DATA.Size]
cmp eax,[cur_editor.Columns.Count]
jbe @f
mov [cur_editor.Columns.Count],eax
@@: pop eax
ret
endp
;-----------------------------------------------------------------------------
proc key.ctrl_d ;///// INSERT SEPARATOR //////////////////////////////////////
;-----------------------------------------------------------------------------
mov eax,90+sizeof.EDITOR_LINE_DATA
call editor_realloc_lines
mov ecx,[cur_editor.Caret.Y]
call get_line_offset
mov ebx,esi
mov ecx,[cur_editor.Lines.Count]
call get_line_offset
lea edi,[esi+90+sizeof.EDITOR_LINE_DATA]
lea ecx,[esi+sizeof.EDITOR_LINE_DATA]
sub ecx,ebx
std
rep movsb
lea edi,[ebx+sizeof.EDITOR_LINE_DATA+1]
mov [ebx+EDITOR_LINE_DATA.Size],90
mov al,ASEPC
mov ecx,79
cld
rep stosb
mov al,' '
mov ecx,10
rep stosb
mov byte[ebx+sizeof.EDITOR_LINE_DATA],';'
inc [cur_editor.Lines.Count]
inc [cur_editor.Caret.Y]
m2m [cur_editor.SelStart.Y],[cur_editor.Caret.Y]
mov [cur_editor.Modified],1
.exit:
ret
endp
;-----------------------------------------------------------------------------
proc key.ctrl_y ;///// DELETE CURRENT LINE ///////////////////////////////////
;-----------------------------------------------------------------------------
mov eax,[cur_editor.Caret.Y]
inc eax
cmp eax,[cur_editor.Lines.Count]
jge .exit
mov ecx,[cur_editor.Caret.Y]
call get_line_offset
mov edi,esi
mov eax,[esi+EDITOR_LINE_DATA.Size]
lea esi,[esi+eax+sizeof.EDITOR_LINE_DATA]
push eax
dec [cur_editor.Lines.Count]
mov ecx,[cur_editor.Lines]
add ecx,[cur_editor.Lines.Size] ;*** add ecx,[ecx-4]
sub ecx,esi
shr ecx,2
cld
rep movsd
pop eax
add eax,sizeof.EDITOR_LINE_DATA
neg eax
call editor_realloc_lines
m2m [cur_editor.SelStart.X],[cur_editor.Caret.X]
m2m [cur_editor.SelStart.Y],[cur_editor.Caret.Y]
mov [cur_editor.Modified],1
.exit:
ret
endp
;-----------------------------------------------------------------------------
proc key.up ;///// GO TO PREVIOUS LINE ///////////////////////////////////////
;-----------------------------------------------------------------------------
call clear_selection
;-----------------------------------------------------------------------------
key.shift_up: ;///// GO TO PREVIOUS LINE, WITH SELECTION ////////////////
;-----------------------------------------------------------------------------
mov eax,[cur_editor.Caret.Y]
dec eax
jns @f
xor eax,eax
@@: mov ecx,[cur_editor.TopLeft.Y]
cmp eax,ecx
jae @f
dec ecx
jns @f
xor ecx,ecx
@@: test [chr],KM_SHIFT
jnz @f
mov [cur_editor.SelStart.Y],eax
@@: mov [cur_editor.Caret.Y],eax
mov [cur_editor.TopLeft.Y],ecx
.exit:
ret
endp
;-----------------------------------------------------------------------------
proc key.down ;///// GO TO NEXT LINE /////////////////////////////////////////
;-----------------------------------------------------------------------------
call clear_selection
;-----------------------------------------------------------------------------
key.shift_down: ;///// GO TO NEXT LINE, WITH SELECTION //////////////////
;-----------------------------------------------------------------------------
mov eax,[cur_editor.Caret.Y]
inc eax
cmp eax,[cur_editor.Lines.Count]
jb @f
dec eax
@@: mov ecx,[cur_editor.TopLeft.Y]
mov edx,eax
sub edx,ecx
cmp edx,[lines.scr]
jb @f
inc ecx
@@: test [chr],KM_SHIFT
jnz @f
mov [cur_editor.SelStart.Y],eax
@@: mov [cur_editor.Caret.Y],eax
mov [cur_editor.TopLeft.Y],ecx
.exit:
ret
endp
;-----------------------------------------------------------------------------
proc key.left ;///// GO TO PREVIOUS CHAR /////////////////////////////////////
;-----------------------------------------------------------------------------
call clear_selection
;-----------------------------------------------------------------------------
key.shift_left: ;///// GO TO PREVIOUS CHAR, WITH SELECTION //////////////
;-----------------------------------------------------------------------------
mov eax,[cur_editor.Caret.X]
dec eax
jns @f
inc eax
@@: test [chr],KM_SHIFT
jnz @f
mov [cur_editor.SelStart.X],eax
@@: mov [cur_editor.Caret.X],eax
.exit:
ret
endp
;-----------------------------------------------------------------------------
proc key.right ;///// GO TO NEXT CHAR ////////////////////////////////////////
;-----------------------------------------------------------------------------
call clear_selection
;-----------------------------------------------------------------------------
key.shift_right: ;///// GO TO NEXT CHAR, WITH SELECTION /////////////////
;-----------------------------------------------------------------------------
mov eax,[cur_editor.Caret.X]
inc eax
cmp eax,[cur_editor.Columns.Count]
jbe @f
dec eax
@@: test [chr],KM_SHIFT
jnz @f
mov [cur_editor.SelStart.X],eax
@@: mov [cur_editor.Caret.X],eax
.exit:
ret
endp
;-----------------------------------------------------------------------------
proc key.pgup ;///// GO TO PREVIOUS PAGE /////////////////////////////////////
;-----------------------------------------------------------------------------
call clear_selection
;-----------------------------------------------------------------------------
key.shift_pgup: ;///// GO TO PREVIOUS PAGE, WITH SELECTION //////////////
;-----------------------------------------------------------------------------
mov edx,[lines.scr]
dec edx
mov eax,[cur_editor.Caret.Y]
mov ecx,[cur_editor.TopLeft.Y]
sub eax,edx
jns @f
xor eax,eax
@@: sub ecx,edx
jns @f
xor ecx,ecx
@@: test [chr],KM_SHIFT
jnz @f
mov [cur_editor.SelStart.Y],eax
@@: mov [cur_editor.Caret.Y],eax
mov [cur_editor.TopLeft.Y],ecx
.exit:
ret
endp
;-----------------------------------------------------------------------------
proc key.pgdn ;///// GO TO NEXT PAGE /////////////////////////////////////////
;-----------------------------------------------------------------------------
call clear_selection
;-----------------------------------------------------------------------------
key.shift_pgdn: ;///// GO TO NEXT PAGE, WITH SELECTION //////////////////
;-----------------------------------------------------------------------------
mov edx,[lines.scr]
dec edx
mov eax,[cur_editor.Caret.Y]
mov ecx,[cur_editor.TopLeft.Y]
add eax,edx
add ecx,edx
cmp eax,[cur_editor.Lines.Count]
jb @f
mov eax,[cur_editor.Lines.Count]
dec eax
@@: test [chr],KM_SHIFT
jnz @f
mov [cur_editor.SelStart.Y],eax
@@: mov [cur_editor.Caret.Y],eax
mov [cur_editor.TopLeft.Y],ecx
.exit:
ret
endp
;-----------------------------------------------------------------------------
proc key.home ;///// GO TO LINE START ////////////////////////////////////////
;-----------------------------------------------------------------------------
call clear_selection
;-----------------------------------------------------------------------------
key.shift_home: ;///// GO TO LINE START, WITH SELECTION /////////////////
;-----------------------------------------------------------------------------
mov [cur_editor.Caret.X],0
test [chr],KM_SHIFT
jnz @f
mov [cur_editor.SelStart.X],0
@@:
.exit:
ret
endp
;-----------------------------------------------------------------------------
proc key.end ;///// GO TO LINE END ///////////////////////////////////////////
;-----------------------------------------------------------------------------
call clear_selection
;-----------------------------------------------------------------------------
key.shift_end: ;///// GO TO LINE END, WITH SELECTION ////////////////////
;-----------------------------------------------------------------------------
mov ecx,[cur_editor.Caret.Y]
call get_line_offset
call get_real_length
mov [cur_editor.Caret.X],eax
test [chr],KM_SHIFT
jnz @f
mov [cur_editor.SelStart.X],eax
@@:
.exit:
ret
endp
;-----------------------------------------------------------------------------
proc key.ctrl_home ;///// GO TO PAGE START ///////////////////////////////////
;-----------------------------------------------------------------------------
call clear_selection
;-----------------------------------------------------------------------------
key.shift_ctrl_home: ;///// GO TO PAGE START, WITH SELECTION ////////////
;-----------------------------------------------------------------------------
mov eax,[cur_editor.TopLeft.Y]
mov ecx,eax
test [chr],KM_SHIFT
jnz @f
mov [cur_editor.SelStart.Y],eax
@@: mov [cur_editor.Caret.Y],eax
mov [cur_editor.TopLeft.Y],ecx
.exit:
ret
endp
;-----------------------------------------------------------------------------
proc key.ctrl_end ;///// GO TO PAGE END //////////////////////////////////////
;-----------------------------------------------------------------------------
call clear_selection
;-----------------------------------------------------------------------------
key.shift_ctrl_end: ;///// GO TO PAGE END, WITH SELECTION ///////////////
;-----------------------------------------------------------------------------
mov ecx,[cur_editor.TopLeft.Y]
mov eax,[lines.scr]
cmp eax,[cur_editor.Lines.Count]
jle @f
mov eax,[cur_editor.Lines.Count]
@@: add eax,ecx
dec eax
test [chr],KM_SHIFT
jnz @f
mov [cur_editor.SelStart.Y],eax
@@: mov [cur_editor.Caret.Y],eax
mov [cur_editor.TopLeft.Y],ecx
.exit:
ret
endp
;-----------------------------------------------------------------------------
proc key.ctrl_pgup ;///// GO TO DOCUMENT START ///////////////////////////////
;-----------------------------------------------------------------------------
call clear_selection
;-----------------------------------------------------------------------------
key.shift_ctrl_pgup: ;///// GO TO DOCUMENT START, WITH SELECTION ////////
;-----------------------------------------------------------------------------
xor eax,eax
mov [cur_editor.TopLeft.Y],eax
mov [cur_editor.Caret.Y],eax
test [chr],KM_SHIFT
jnz @f
mov [cur_editor.SelStart.Y],eax
@@:
.exit:
ret
endp
;-----------------------------------------------------------------------------
proc key.ctrl_pgdn ;///// GO TO DOCUMENT END /////////////////////////////////
;-----------------------------------------------------------------------------
call clear_selection
;-----------------------------------------------------------------------------
key.shift_ctrl_pgdn: ;///// GO TO DOCUMENT END, WITH SELECTION //////////
;-----------------------------------------------------------------------------
mov eax,[cur_editor.Lines.Count]
mov [cur_editor.Caret.Y],eax
sub eax,[lines.scr]
jns @f
xor eax,eax
@@: mov [cur_editor.TopLeft.Y],eax
dec [cur_editor.Caret.Y]
test [chr],KM_SHIFT
jnz @f
m2m [cur_editor.SelStart.Y],[cur_editor.Caret.Y]
@@:
.exit:
ret
endp
;-----------------------------------------------------------------------------
proc key.del ;///// DELETE NEXT CHAR OR SELECTION ////////////////////////////
;-----------------------------------------------------------------------------
call delete_selection
jnc .exit
mov ecx,[cur_editor.Caret.Y]
call get_line_offset
and [esi+EDITOR_LINE_DATA.Flags],not EDITOR_LINE_FLAG_SAVED
or [esi+EDITOR_LINE_DATA.Flags],EDITOR_LINE_FLAG_MOFIFIED
lea ebx,[esi+sizeof.EDITOR_LINE_DATA]
mov ebp,esi
call get_real_length
or eax,eax
je .line_up
mov ecx,[cur_editor.Caret.X]
cmp ecx,eax
jae .line_up
lea edi,[ebx+ecx]
neg ecx
mov eax,[ebp+EDITOR_LINE_DATA.Size]
add ecx,eax;[ebp]
repe scasb
je .line_up
mov edi,ebx
mov ecx,[cur_editor.Caret.X]
add edi,ecx
lea esi,[edi+1]
neg ecx
mov eax,[ebp+EDITOR_LINE_DATA.Size]
add ecx,eax;[ebp]
dec ecx
rep movsb
mov byte[edi],' '
m2m [cur_editor.SelStart.X],[cur_editor.Caret.X]
m2m [cur_editor.SelStart.Y],[cur_editor.Caret.Y]
mov [cur_editor.Modified],1
ret
.line_up:
mov eax,[cur_editor.Lines.Count]
dec eax
cmp eax,[cur_editor.Caret.Y]
je .exit
mov edi,[temp_buf]
add edi,sizeof.EDITOR_LINE_DATA
mov esi,ebx
mov ecx,[cur_editor.Caret.X]
rep movsb
mov ecx,[cur_editor.Caret.X]
mov eax,[temp_buf]
mov [eax+EDITOR_LINE_DATA.Size],ecx
cmp ecx,[ebp+EDITOR_LINE_DATA.Size]
jbe @f
mov eax,[ebp+EDITOR_LINE_DATA.Size]
sub ecx,eax
sub edi,ecx
mov al,' '
rep stosb
@@: lea esi,[ebx+sizeof.EDITOR_LINE_DATA]
mov eax,[ebp+EDITOR_LINE_DATA.Size]
add esi,eax
mov ecx,[esi-sizeof.EDITOR_LINE_DATA+EDITOR_LINE_DATA.Size]
mov eax,[temp_buf]
add [eax+EDITOR_LINE_DATA.Size],ecx
or [eax+EDITOR_LINE_DATA.Flags],EDITOR_LINE_FLAG_MOFIFIED
rep movsb
mov ecx,edi
sub ecx,[temp_buf]
mov esi,[temp_buf]
call get_real_length
cmp eax,[cur_editor.Columns.Count]
jbe @f
mov [cur_editor.Columns.Count],eax
@@:
push ecx
mov edi,[cur_editor.Lines]
add edi,[cur_editor.Lines.Size] ;*** add edi,[edi-4]
dec edi
lea esi,[edi+sizeof.EDITOR_LINE_DATA*2] ; !!! CHECK THIS !!!
sub esi,ecx
mov eax,[ebp+EDITOR_LINE_DATA.Size]
add esi,eax
mov eax,[ebp+eax+sizeof.EDITOR_LINE_DATA+EDITOR_LINE_DATA.Size]
add esi,eax
lea ecx,[esi-sizeof.EDITOR_LINE_DATA]
sub ecx,ebp
std
cmp esi,edi
jb @f
jz .lp1
mov edi,ebp
add edi,[esp]
lea esi,[ebp+sizeof.EDITOR_LINE_DATA*2] ; !!! CHECK THIS !!!
mov eax,[esi-sizeof.EDITOR_LINE_DATA*2+EDITOR_LINE_DATA.Size] ; !!! CHECK THIS !!!
add esi,eax
mov eax,[esi-sizeof.EDITOR_LINE_DATA+EDITOR_LINE_DATA.Size] ; !!! CHECK THIS !!!
add esi,eax
mov ecx,[cur_editor.Lines]
add ecx,[cur_editor.Lines.Size] ;*** add ecx,[ecx-4]
sub ecx,esi
cld
@@: rep movsb
.lp1: pop ecx
mov esi,[temp_buf]
mov edi,ebp
cld
rep movsb
.ok.dec.lines:
dec [cur_editor.Lines.Count]
mov eax,[cur_editor.Lines.Count]
cmp [cur_editor.Caret.Y],eax
jb @f
dec eax
mov [cur_editor.Caret.Y],eax
@@: m2m [cur_editor.SelStart.X],[cur_editor.Caret.X]
m2m [cur_editor.SelStart.Y],[cur_editor.Caret.Y]
mov ecx,[cur_editor.Lines.Count]
call get_line_offset
mov eax,[esi+EDITOR_LINE_DATA.Size]
lea esi,[esi+eax+sizeof.EDITOR_LINE_DATA]
mov eax,[cur_editor.Lines]
add eax,[cur_editor.Lines.Size] ;*** add eax,[eax-4]
sub esi,eax
lea eax,[esi+4096]
call editor_realloc_lines
mov [cur_editor.Modified],1
.exit:
ret
endp
;-----------------------------------------------------------------------------
proc key.ins ;///// TOGGLE INSERT/OVERWRITE MODE /////////////////////////////
;-----------------------------------------------------------------------------
xor [ins_mode],1
mov eax,[cur_editor.Caret.Y]
mov ebx,eax
call draw_editor_text.part
call draw_editor_caret
ret
endp
;-----------------------------------------------------------------------------
proc key.bkspace ;///// DELETE PREVIOUS CHAR OR SELECTION ////////////////////
;-----------------------------------------------------------------------------
call delete_selection
jnc key.del.exit
mov eax,[cur_editor.Caret.X]
dec eax
js .line_up
dec [cur_editor.Caret.X]
mov ecx,[cur_editor.Caret.Y]
call get_line_offset
and [esi+EDITOR_LINE_DATA.Flags],not EDITOR_LINE_FLAG_SAVED
or [esi+EDITOR_LINE_DATA.Flags],EDITOR_LINE_FLAG_MOFIFIED
mov ebx,eax
call get_real_length
cmp eax,[cur_editor.Caret.X]
jae @f
m2m [cur_editor.SelStart.X],[cur_editor.Caret.X]
mov [cur_editor.Modified],1
ret
@@: lea edi,[esi+sizeof.EDITOR_LINE_DATA+ebx]
mov ecx,ebx
neg ecx
mov eax,[esi+EDITOR_LINE_DATA.Size]
add ecx,eax
dec ecx
lea esi,[edi+1]
cld
rep movsb
mov byte[edi],' '
m2m [cur_editor.SelStart.X],[cur_editor.Caret.X]
m2m [cur_editor.SelStart.Y],[cur_editor.Caret.Y]
mov [cur_editor.Modified],1
ret
.line_up:
cmp [cur_editor.Caret.Y],0
jne @f
ret
@@: mov ecx,[cur_editor.Caret.Y]
dec ecx
call get_line_offset
and [esi+EDITOR_LINE_DATA.Flags],not EDITOR_LINE_FLAG_SAVED
or [esi+EDITOR_LINE_DATA.Flags],EDITOR_LINE_FLAG_MOFIFIED
mov ebp,esi
lea ebx,[esi+sizeof.EDITOR_LINE_DATA]
mov ecx,[ebp+EDITOR_LINE_DATA.Size]
@@: cmp byte[ebx+ecx-1],' '
jne @f
dec ecx
jg @b
@@: mov [cur_editor.Caret.X],ecx
dec [cur_editor.Caret.Y]
cld
jmp key.del.line_up
endp
;-----------------------------------------------------------------------------
proc key.tab ;///// TABULATE /////////////////////////////////////////////////
;-----------------------------------------------------------------------------
call delete_selection
mov eax,[cur_editor.Caret.X]
mov ecx,eax
add eax,ATABW
and eax,not(ATABW-1)
push eax ' '
sub eax,ecx
.direct:
push eax
call editor_realloc_lines
pop eax
mov ecx,[cur_editor.Caret.Y]
call get_line_offset
and [esi+EDITOR_LINE_DATA.Flags],not EDITOR_LINE_FLAG_SAVED
or [esi+EDITOR_LINE_DATA.Flags],EDITOR_LINE_FLAG_MOFIFIED
xchg eax,ecx
call get_real_length
cmp eax,[cur_editor.Caret.X]
jae @f
mov eax,[cur_editor.Caret.X]
@@: mov edx,[esi+EDITOR_LINE_DATA.Size]
sub edx,eax
cmp ecx,edx
jl @f
push eax
mov eax,10
call editor_realloc_lines
add esi,eax
pop eax
pushad
mov ecx,[cur_editor.Lines]
add ecx,[cur_editor.Lines.Size] ;*** add ecx,[ecx-4]
dec ecx
mov edi,ecx
add ecx,-10+1
mov eax,[esi+EDITOR_LINE_DATA.Size]
lea eax,[esi+eax+sizeof.EDITOR_LINE_DATA]
sub ecx,eax
lea esi,[edi-10]
std
rep movsb
mov ecx,10
mov al,' '
rep stosb
popad
add [esi+EDITOR_LINE_DATA.Size],10
jmp @b
@@: lea ebx,[esi+sizeof.EDITOR_LINE_DATA]
push ecx
mov edi,[esi+EDITOR_LINE_DATA.Size]
lea edi,[ebx+edi-1]
mov esi,edi
sub esi,ecx
lea ecx,[esi+1]
sub ecx,ebx
sub ecx,[cur_editor.Caret.X]
std
rep movsb
.ok: pop ecx
pop eax
rep stosb
cld
pop [cur_editor.Caret.X]
lea esi,[ebx-sizeof.EDITOR_LINE_DATA]
call get_real_length
cmp eax,[cur_editor.Caret.X]
jae @f
mov eax,[cur_editor.Caret.X]
@@: cmp eax,[cur_editor.Columns.Count]
jbe @f
mov [cur_editor.Columns.Count],eax
@@: m2m [cur_editor.SelStart.X],[cur_editor.Caret.X]
m2m [cur_editor.SelStart.Y],[cur_editor.Caret.Y]
mov [cur_editor.Modified],1
.exit:
ret
endp
;-----------------------------------------------------------------------------
proc key.return ;///// CARRIAGE RETURN ///////////////////////////////////////
;-----------------------------------------------------------------------------
call delete_selection
mov eax,14
call editor_realloc_lines
mov ecx,[cur_editor.Caret.Y]
call get_line_offset
mov ebx,[cur_editor.Caret.X]
cmp ebx,[esi+EDITOR_LINE_DATA.Size]
jb @f
mov ebx,[esi+EDITOR_LINE_DATA.Size]
dec ebx
jns @f
xor ebx,ebx
@@:
cld
mov edi,[temp_buf]
mov ebp,esi
lea ecx,[ebx+1]
@@: dec ecx
jz @f
cmp byte[esi+ecx+sizeof.EDITOR_LINE_DATA-1],' '
je @b
@@: lea eax,[ecx+10]
mov [edi+EDITOR_LINE_DATA.Size],eax
mov [edi+EDITOR_LINE_DATA.Flags],EDITOR_LINE_FLAG_MOFIFIED
add edi,sizeof.EDITOR_LINE_DATA
jecxz @f
push esi
add esi,sizeof.EDITOR_LINE_DATA
rep movsb
pop esi
@@: mov al,' '
mov ecx,10
rep stosb
mov ecx,[esi+EDITOR_LINE_DATA.Size]
sub ecx,ebx
add esi,ebx
add esi,sizeof.EDITOR_LINE_DATA
inc ecx
@@: dec ecx
jz @f
cmp byte[esi+ecx-1],' '
je @b
@@: jz .lp1
@@: cmp byte[esi],' '
jne .lp1
inc esi
loop @b
.lp1: test [auto_indent],1
jz .lp2
push edi ecx
mov ecx,[ebp+EDITOR_LINE_DATA.Size]
lea edi,[ebp+sizeof.EDITOR_LINE_DATA]
mov al,' '
repe scasb
mov eax,ecx
pop ecx edi
je .lp2
neg eax
mov edx,[ebp+EDITOR_LINE_DATA.Size]
add eax,edx;[ebp]
dec eax
jmp @f
.lp2: xor eax,eax
@@: mov edx,edi
add edi,sizeof.EDITOR_LINE_DATA
mov [cur_editor.Caret.X],eax
jecxz @f
push ecx
mov ecx,eax
mov al,' '
rep stosb
pop ecx
@@: jecxz @f
rep movsb
@@: mov ecx,10
mov al,' '
rep stosb
lea eax,[edi-sizeof.EDITOR_LINE_DATA]
sub eax,edx
mov [edx+EDITOR_LINE_DATA.Size],eax
mov [edx+EDITOR_LINE_DATA.Flags],EDITOR_LINE_FLAG_MOFIFIED
mov ecx,edi
sub ecx,[temp_buf]
push ecx
mov edi,[cur_editor.Lines]
add edi,[cur_editor.Lines.Size] ;*** add edi,[edi-4]
dec edi
lea esi,[edi+sizeof.EDITOR_LINE_DATA]
sub esi,ecx
mov ecx,[ebp+EDITOR_LINE_DATA.Size]
add esi,ecx
lea ecx,[esi-sizeof.EDITOR_LINE_DATA]
sub ecx,ebp
std
cmp esi,edi
jb @f
je .lp3
lea esi,[ebp+sizeof.EDITOR_LINE_DATA]
mov eax,[esp]
lea edi,[esi+eax-sizeof.EDITOR_LINE_DATA]
mov ecx,[ebp+EDITOR_LINE_DATA.Size]
add esi,ecx
mov ecx,[cur_editor.Lines]
add ecx,[cur_editor.Lines.Size] ;*** add ecx,[ecx-4]
sub ecx,esi
cld
@@: rep movsb
.lp3: pop ecx
mov esi,[temp_buf]
mov edi,ebp
cld
rep movsb
inc [cur_editor.Caret.Y]
inc [cur_editor.SelStart.Y]
inc [cur_editor.Lines.Count]
m2m [cur_editor.SelStart.X],[cur_editor.Caret.X]
mov [cur_editor.Modified],1
.exit:
ret
endp
;-----------------------------------------------------------------------------
proc key.ctrl_tab ;///// SWITCH TO NEXT TAB //////////////////////////////////
;-----------------------------------------------------------------------------
cmp [tab_bar.Items.Count],1
je .exit
xor eax,eax
mov ebp,[tab_bar.Items]
@@: cmp ebp,[tab_bar.Current.Ptr]
je @f
inc eax
add ebp,sizeof.TABITEM
jmp @b
@@: add ebp,sizeof.TABITEM
inc eax
cmp eax,[tab_bar.Items.Count]
jb @f
mov ebp,[tab_bar.Items]
@@: call set_cur_tab
call make_tab_visible
call align_editor_in_tab
call draw_editor
call draw_tabctl
call update_caption
.exit:
ret
endp
;-----------------------------------------------------------------------------
proc key.shift_ctrl_tab ;///// SWITCH TO PREVIOUS TAB ////////////////////////
;-----------------------------------------------------------------------------
cmp [tab_bar.Items.Count],1
je .exit
xor eax,eax
mov ebp,[tab_bar.Items]
@@: cmp ebp,[tab_bar.Current.Ptr]
je @f
inc eax
add ebp,sizeof.TABITEM
jmp @b
@@: add ebp,-sizeof.TABITEM
dec eax
jge @f
imul eax,[tab_bar.Items.Count],sizeof.TABITEM
add eax,[tab_bar.Items]
lea ebp,[eax-sizeof.TABITEM]
@@: call set_cur_tab
call make_tab_visible
call align_editor_in_tab
call draw_editor
call draw_tabctl
call update_caption
.exit:
ret
endp
;-----------------------------------------------------------------------------
proc key.ctrl_f4 ;///// CLOSE CURRENT TAB ////////////////////////////////////
;-----------------------------------------------------------------------------
cmp [cur_editor.Modified],0
je .close
mov [bot_mode2],2
jmp key.ctrl_o.direct
.close:
mov [do_not_draw],1
push [tab_bar.Current.Ptr]
cmp [tab_bar.Items.Count],1
jne @f
;call create_tab
jmp key.alt_x.close ; close program
@@: pop ebp
call delete_tab
dec [do_not_draw]
call align_editor_in_tab
call draw_editor
call draw_tabctl
call draw_statusbar
ret
endp
;-----------------------------------------------------------------------------
proc key.shift_f9 ;///// SET DEFAULT TAB /////////////////////////////////////
;-----------------------------------------------------------------------------
mov eax,[tab_bar.Current.Ptr]
cmp eax,[tab_bar.Default.Ptr]
jne @f
xor eax,eax
@@: mov [tab_bar.Default.Ptr],eax
mov ebp,[tab_bar.Current.Ptr]
call make_tab_visible
cmp [tab_bar.Style],2
jbe @f
call align_editor_in_tab
call draw_editor
@@: call draw_tabctl
ret
endp
;-----------------------------------------------------------------------------
proc key.f3 ;///// FIND NEXT MATCH ///////////////////////////////////////////
;-----------------------------------------------------------------------------
call search
jc @f
@@: ret
endp
;-----------------------------------------------------------------------------
proc key.f9 ;///// COMPILE AND RUN ///////////////////////////////////////////
;-----------------------------------------------------------------------------
mov bl,1
call start_fasm
ret
endp
;-----------------------------------------------------------------------------
proc key.ctrl_f9 ;///// COMPILE //////////////////////////////////////////////
;-----------------------------------------------------------------------------
mov bl,0
call start_fasm
ret
endp
;-----------------------------------------------------------------------------
proc key.alt_x ;///// EXIT PROGRAM ///////////////////////////////////////////
;-----------------------------------------------------------------------------
mov [main_closing],1
mov eax,[tab_bar.Items]
mov [exit_tab_item],eax
mov eax,[tab_bar.Items.Count]
mov [exit_tab_num],eax
.direct:
call try_to_close_tabs
or eax,eax
jz @f
mov [bot_mode2],2
jmp key.ctrl_o.direct
@@: stdcall save_settings
.close:
mov [main_closed],1
mcall -1
endp
;-----------------------------------------------------------------------------
proc try_to_close_tabs ;///// FIND TABS TO BE SAVED BEFORE CLOSE /////////////
;-----------------------------------------------------------------------------
push ecx ebp
call flush_cur_tab
mov ebp,[exit_tab_item] ; [tab_bar.Items]
add ebp,-sizeof.TABITEM
@@: dec [exit_tab_num]
js .ok
add ebp,sizeof.TABITEM
mov al,[ebp+TABITEM.Editor.Modified]
cmp [ebp+TABITEM.Editor.Modified],0
je @b
mov [exit_tab_item],ebp
call set_cur_tab
call make_tab_visible
xor eax,eax
inc eax
@@: pop ebp ecx
ret
.ok: xor eax,eax
jmp @b
endp