Egor00f/kolibrios
1
0
Fork 0
forked from KolibriOS/kolibrios
Code Pull Requests Activity
8735d3ceac
kolibrios/programs/emulator/dgen-sdl-1.33/mz80/mz80.txt
turbocat ea1a60faa3 Upload DGEN port source 
git-svn-id: svn://kolibrios.org@9837 a494cfbc-eb01-0410-851d-a64ba20cac60
2022-06-15 18:25:17 +00:00

810 lines
30 KiB
Plaintext
Raw Blame History

Multi-Z80 32 Bit emulator
Copyright 1996, 1997, 1998, 1999, 2000 - Neil Bradley, All rights reserved
MZ80 License agreement
-----------------------
(MZ80 Refers to both the assembly code emitted by makez80.c and makez80.c
itself)
MZ80 May be distributed in unmodified form to any medium.
MZ80 May not be sold, or sold as a part of a commercial package without
the express written permission of Neil Bradley (neil@synthcom.com). This
includes shareware.
Modified versions of MZ80 may not be publicly redistributed without author
approval (neil@synthcom.com). This includes distributing via a publicly
accessible LAN. You may make your own source modifications and distribute
MZ80 in source or object form, but if you make modifications to MZ80
then it should be noted in the top as a comment in makez80.c.
MZ80 Licensing for commercial applications is available. Please email
neil@synthcom.com for details.
Synthcom Systems, Inc, and Neil Bradley will not be held responsible for
any damage done by the use of MZ80. It is purely "as-is".
If you use MZ80 in a freeware application, credit in the following text:
"Multi-Z80 CPU emulator by Neil Bradley (neil@synthcom.com)"
must accompany the freeware application within the application itself or
in the documentation.
Legal stuff aside:
If you find problems with MZ80, please email the author so they can get
resolved. If you find a bug and fix it, please also email the author so
that those bug fixes can be propogated to the installed base of MZ80
users. If you find performance improvements or problems with MZ80, please
email the author with your changes/suggestions and they will be rolled in
with subsequent releases of MZ80.
The whole idea of this emulator is to have the fastest available 32 bit
Multi-Z80 emulator for the x86, giving maximum performance.
MZ80 Contact information
-------------------------
Author : Neil Bradley (neil@synthcom.com)
Distribution: ftp://ftp.synthcom.com/pub/emulators/cpu/makez80.zip (latest)
You can join the cpuemu mailing list on Synthcom for discussion of Neil
Bradley's Z80 (and other) CPU emulators. Send a message to
"cpuemu-request@synthcom.com" with "subscribe" in the message body. The
traffic is fairly low, and is used as a general discussion and announcement
for aforementioned emulators.
MZ80 Documentation
-------------------
MZ80 Is a full featured Z80 emulator coded in 32 bit assembly. It runs well
over a hundred games, in addition to it supporting many undocumented Z80
instructions required to run some of the Midway MCR games, Galaga, and
countless other wonderful Z80 based arcade games.
MZ80 Contains a makez80.c program that must be compiled. It is the program
that emits the assembly code that NASM will compile. This minimizes the
possibility of bugs creeping in to MZ80 for the different addressing modes
for each instruction. It requires NASM 0.97 or greater.
The goal of MZ80 is to have a high performance Z80 emulator that is capable
of running multiple emulations concurrently at full speed, even on lower-end
machines (486/33). MZ80 Harnesses the striking similarities of both the Z80
and the x86 instruction sets to take advantage of flag handling which greatly
reduces the time required to emulate a processor, so no extra time is spent
computing things that are already available in the native x86 processor,
allowing it to perform leaps and bounds over comparable C based Z80 emulators
on the same platform.
MZ80 Is designed exclusively for use with NASM, the Netwide Assembler. This
gives the ultimate in flexibility, as NASM can emit object files that work
with Watcom, Microsoft Visual C++ (4.0-current), DJGPP, Borland C++, and
gcc under FreeBSD or Linux. MZ80 Has been tested with each one of these
compilers and is known to work properly on each.
What's in the package
---------------------
MZ80.TXT - This text file
MAKEZ80.C - Multi Z80 32 Bit emulator emitter program
MZ80.H - C Header file for MZ80 functions
What's new in this release
--------------------------
Revision 3.4:
* Fixed the overflow flag not getting cleared in the SetOverflow()
routine. It caused strange problems with a handful of Genesis games
* Removed invalid instruction in the C version so that more
instructions will execute
Revision 3.3:
* Undocumented opcodes added to the C emitter
* Bug fix to the C emission that properly handles shared RAM regions
(I.E. with handlers that are NULL)
* Now using 32 bit registers to do register/memory access. Slight
speed increase (assembly version only)
Revision 3.2:
* R Register emulation now accurate with a real Z80
* mz80int() Called when interrupts are disabled causes the
z80intPending flag to be set, and an interrupt will be caused after
the execution of EI and the next instruction. See "IMPORTANT NOTE
ABOUT INTERRUPTS" below
* The instruction after EI executes fully before interrupt status is
checked. (as does a real Z80)
Revision 3.1:
* Fixed bug in memory dereference when handler was set to NULL (keeps
system from crashing or faulting)
* Removed the only stricmp() from the entire file and replaced it
with strcmp() so that stdlibs without it will compile
* Changed cyclesRemaining > 0 to cyclesRemaining >= 0 to be compatible
with the ASM core
* Removed additional sub [dwCyclesRemaining], 5 at the beginning of
mz80exec() (ASM Core only). Increases timing accuracy.
* NMIs And INTs add additional time to dwElapsedTicks as it should
* mz80ReleaseTimeslice() Sets remaining clocks to 0 instead of 1
Revision 3.0:
* All instructions validated against a real Z80. Used an ISA card
with a Z80 on it to validate flag handling, instruction handling,
timing, and other goodies. The only thing not implemented/emulated
is flag bit 3 & 5 emulation. Believed to be 100% bug free!
* 80% Speed improvement over version 2.7 of mz80
* z80stb.c Removed. Use -c to emit a C version of mz80! API compatible!
Note that this is mostly, but not fully, debugged, so consider the
C version a beta! It's at least healthier than z80stb.c was. The C
version does not include the undocumented Z80 instructions.
* mz80nmi() No longer trashes registers it uses when using -cs
* IN/OUT Instructions work properly when using -16
* IN A, (xxh) uses A as high 8 bits of I/O fetch address when using -16
* IM 0/IM 1 Description in documentation fixed
* Sizes of all context registers increased to 32 bits - for speed!
* IFF1/IFF2 Now properly emulated
* JR Instruction offset can fetch from $ffff and properly wrap
* LDIR/LDDR Instruction now won't go to completion - instead it will
run until BC=0 or the # of cycles to execute have expired. These
instructions used to run to completion - even beyond the # of cycles
left to execute
* INI/IND/INIR/INDR countdown bug fixed - it was decrementing B twice
for each IN! Whoops!
* If you specify NULL as a handler address to a memory region, mz80 will
use vpData as a pointer to where that block of data resides. Quite
useful for multiprocessor emulations that share the same memory.
* EDI Now keeps track of cycle counting for faster execution
* Modified memory region scanning code to use 32 bit registers instead
of their 16 bit counterparts
* Get/SetContext() uses rep movsd/movsb. Insignificant overall, but
why waste the time?
* Debugging routines added. See the "DEBUGGING" section below for more
information. NOTE: The debugging routines are not yet available in
the C emission.
* Timing done slightly differently now. Mz80 now executes one
instruction past the timing given on input. For example, mz80exec(0)
will cause a single instruction to be executed (thusly -ss was
removed).
Revision 2.7:
* Fixed OTIR/OTDR/INIR/INDR instructions so their 16 bit counterparts
work properly
* Emulation core 30-70% faster overall than 2.6 due to optimization to
the timing routines
* Replaced word reads/writes with a special word write routine rather
than the standard calling to read/write byte functions
* z80stb.c (the C equivalent of mz80) compiles properly now
* Fixed OS/2 text/segment issue
* Fixed bug in set/getCPU context that ensures that ES=DS and avoids
crashes. Caused crashes under OS/2 and other OS's
Revision 2.6:
* Emulator core 5-30% faster overall. Some 16 and 8 bit instructions
sped up when using their 32 bit equivalents.
* Fix to -l so that proper labels without leading and trailing
underscores so Linux/FreeBSD compiles will work properly
* Single step now executes the # of instructions passed in to z80exec()
instead of just 1 as it had in prior releases. This is only active
when the -ss option is used.
* The -nt option was added. This will cause the timing information to
not be added in, speeding up execution. Warning: Only do this if your
emulated target does not require instruction timing!
* Updated documentation errors
* C Version of mz80 (mz80.c) that is API compliant is distributed with
the archive (With kind permission of Edward Massey).
Revision 2.5:
* Fixed an unconditional flag being cleared in the ddcbxx instructions.
It caused Donkey Kong's barrels to not roll.
Revision 2.4:
* Fixed improper HALT handling (didn't advance the PTR when it should)
* Fixed SRL (IX+$xx) instruction so that carry wasn't trashed
* Fixed single stepping problems with it giving too much time to
any given instruction
* Fixed half carry flag handling with 16 bit SBC and ADD instructions
* Fixed DAA emulation so that parity flags weren't getting trashed
Revision 2.3:
* Fixed many stack handling bugs
* Timing problems fixed. The prior version was causing massive
overruns on maximum timeslices with some insutructions.
Revision 2.2:
* Fixed a bug in CPI/CPD/CPIR/CPDR that mishandled flags
* All known bugs are out of mz80 now
* Added the -cs option to route all stack operations through the
handlers (required for games like Galaga)
Revision 2.1:
* Fixed a bug in CPI/CPD/CPIR/CPDR that caused intermittent lockups.
Also fixed a bug that caused erratic behavior in several video games.
* Added INI/IND/INIR/INDR instruction group
* Added OUTI/OUTD/OTIR/OTDR instruction group
Revision 1.0:
* First release! The whole thing is new!
ASSEMBLING FOR USE WITH WATCOM C/C++
------------------------------------
Watcom, by default, uses register calling conventions, as does MZ80. To
create a proper emulator for Watcom:
makez80 MZ80.asm -x86
From here:
nasm -f win32 MZ80.asm
Link the MZ80.obj with your Watcom linker.
ASSEMBLING FOR USE WITH MICROSOFT VISUAL C++ AND BORLAND C++
--------------------------------------------------------------------
Visual C++ and Borland C++ use stack calling conventions by default. To
create a proper emulator for these compilers:
makez80 MZ80.asm -s -x86
For Visual C++ or Borland C++:
nasm -f win32 MZ80.asm
Link with your standard Visual C++ or Borland C++.
ASSEMBLING FOR USE WITH DJGPP, GCC/FREEBSD, OR GCC/LINUX
--------------------------------------------------------------------
DJGPP Uses stack calling conventions:
makez80 MZ80.asm -s -x86
To assemble:
nasm -f coff MZ80.asm
Link with your standard DJGPP linker. The same holds true for GCC under
FreeBSD or Linux. If you're using GCC, use the -l option to generate "plain"
labels so that gcc's linker will properly link things.
MAKEZ80 COMMAND LINE OPTIONS
----------------------------
-s - Use stack calling conventions (DJGPP, MSVC, Borland, etc...)
-cs - Force all stack operations to go through the Read/Write memory handlers.
This slows things down, but is useful when needed.
-16 - Treat all I/O input and output as 16 bit (BC)
-l - Create 'plain' labels - ones without leading and trailing underscores
-nt - Do not generate timing code - this speeds the emulator up, but the
downside is that no timing info is available.
-c - Emit a C mz80 emulator (API Compatible with the assembly version -
handy for porters!)
-x86 - Emit an assembly (x86) mz80 emulator
-os2 - Generate OS/2 compatible segmentation
IMPORTANT NOTE ABOUT INTERRUPTS
-------------------------------
A minor change was made between the 3.1 and 3.2 versions of makez80 in the
way that interrupts were handled.
On a real Z80, the !INT line is a level triggered interrupt, meaning that if
the interrupt line is held low, the Z80 will continue to take interrupts
immediately after the instruction after the EI instruction is executed until
the interrupt line is high again.
In 3.1, if an interrupt came in and interrupts were disabled, the interrupt
would never be "latched" for later execution. The Z80 does not have any
internal latching capabilities, however external hardware often does hold
the interrupt line low until the interrupt is executed, in effect, a latch.
I've only found one video game so far that requires the "raising/lowering"
of the interrupt line (Ataxx). In the games that I've tried, it has improved
performance, in some cases drastically, and in others not at all. This can
be accounted for by interrupts being taken now, where they were being dropped
in prior mz80 releases.
mz80 Emulates the most commonly used scenario. Now when mz80int() is executed
and a nonzero value is returned (indicating interrupts were disabled), it
will set z80intPending, and the interrupt will be taken after execution of
one instruction beyond the EI instruction.
So now, if mz80int() returns a nonzero value, that means an interrupt is
latched. If clearing this latch is desired or the old behavior of 3.1 is
desired, make a call to the mz80ClearPendingInterrupt() call. It's a 2
instruction call that has extremely small overhead and will not affect
performance in any measurable way.
In any case, MZ80 will now execute one instruction after EI regardless of
how much time is available to avoid the possibility of an interrupt request
coming in directly after the EI instruction.
STEPS TO EMULATION
------------------
NOTE: -16 Is a command line option that will treat all I/O as 16 bit. That
is, in an instruction like "IN AL, (C)", the addressed passed to the I/O
handler will be BC instead of just C. Bear this in mind when considering your
emulated platform.
There are a few steps you want to go through to get proper emulation, and a
few guidelines must be followed.
1) Create a MZ80CONTEXT
2) Create your virtual 64K memory space using whatever means of obtaining
memory you need to do.
3) Set mz80Base in your context to be the base of your 64K memory space
4) Load up your image to be emulated within that 64K address space.
5) Set z80IoRead and z80IoWrite to their appropriate structure arrays. Here's
an example:
struct z80PortRead ReadPorts[] =
{
{0x10, 0x1f, SoundChip1Read},
{0x20, 0x2f, SoundChip2Read}
{(UINT32) -1, (UINT32) -1, NULL}
};
When an IN instruction occurs, mz80 will probe this table looking for a
handler to the address of the "IN" instruction. If it is found in the list,
it's up to the handler to return the proper value. Otherwise, a value of
0ffh is returned internally if no handler for that I/O address is found. In
the case above, SoundChip1Read is called when the I/O address is between 0x10-
0x1f. A similar structure is used for I/O writes as well (OUT):
struct z80PortWrite WritePorts[] =
{
{0x20, 0x2f, SoundChip2Write},
{0x30, 0x36, VideoCtrlWrite},
{(UINT32) -1, (UINT32) -1, NULL}
}
Of course, this does the opposite that the z80PortRead struct, and instead
looks for a handler to hand some data to. If it doesn't find an appropriate
handler, nothing happens.
6) Set mz80MemoryRead & mz80MemoryWrite to their appropriate structure
arrays. Here is an example:
struct MemoryWriteByte GameWrite[] =
{
{0x3000, 0x3fff, VideoWrite},
{0x4000, 0x4fff, SpriteWrite},
{(UINT32) -1, (UINT32) -1, NULL}
};
The above example says that any time a write occurs in the 0x3000-0x3fff
range, call the VideoWrite routine. The same holds true for the SpriteWrite
region as well.
NOTE: When your write handler is called, it is passed the address of the
write and the data that is to be written to it. If your handler doesn't
write the data to the virtual image, the mz80 internal code will not.
NOTE: These routines will *NOT* be called when execution asks for these
addresses. It will only call them when a particular instruction uses the
memory at these locations.
If you wish for a region to be RAM, just leave it out of your memory region
exception list. The WriteMemoryByte routine will treat it as read/write
RAM and will write to mz80Base + addr directly.
If you wish to protect ROM regions (not often necessary), create a range that
encompasses the ROM image, and have it call a routine that does nothing. This
will prevent data from being written back onto the ROM image.
Leave your last entry in the table as shown above, with a null handler and
0xffffffff-0xffffffff as your read address. Even though the Z80 only
addresses 64K of space, the read/write handlers are defined as 32 bit so
the compiler won't pass junk in the upper 16 bits of the address lines. Not
only that, it allows orthoganality for future CPU emulators that may use
these upper bits.
You can do a mz80GetContext() if you'd like to read the current context of
the registers. Note that by the time your handler gets called, the program
counter will be pointing to the *NEXT* instruction.
struct MemoryReadByte GameRead[] =
{
{0x2000, 0x200f, ReadHandler},
{(UINT32) -1, (UINT32) -1, NULL}
};
Same story here. If you have a special handler for an attempted read at a
particular address, place its range in this table and create a handler
routine for it.
If you don't define a handler for a particular region, then the ReadMemoryByte
in mz80.ASM will actually read the value out of mz80Base + the offset
required to complete the instruction.
7) Set the intAddr and nmiAddr to the addresses where you want mz80 to start
executing when an interrupt or NMI happens. Take a look at the section
entitled "INTERRUPTS" below for more information on this.
8) Call mz80SetContext() on your Z80 context
9) Call mz80Reset(). This will prime the program counter and cause a virtual
CPU-wide reset.
10) Once you have those defined, you're ready to begin emulation. There's some
sort of main loop that you'll want. Maybe something like:
while (hit == 0)
{
if (lastSec != (UINT32) time(0))
{
diff = (mz80clockticks - prior) / 3000000;
printf("%ld Clockticks, %ld frames, %ld Times original speed\n", MZ80clockticks - prior, frames, diff);
frames = 0;
prior = mz80clockticks;
lastSec = time(0);
if (kbhit())
{
getch();
hit = 1;
}
}
/* 9000 Cycles per NMI (~3 milliseconds @ 3MHZ) */
dwResult = mz80exec(9000);
mz80clockticks += mz80GetElapsedTicks(TRUE);
mz80nmi();
/* If the result is not 0x80000000, it's an address where
an invalid instruction was hit. */
if (0x80000000 != dwResult)
{
mz80GetContext(&sCpu1);
printf("Invalid instruction at %.2x\n", sCpu1.MZ80pc);
exit(1);
}
}
Call mz80exec() With the # of virtual CPU cycles you'd like mz80 to
execute. Be sure to use the mz80GetElapsedTicks() call *AFTER* execution to
see how many virtual CPU cycles it actually executed. For example, if you tell
mz80 to execute 500 virtual CPU cycles, it will execute slightly more. Anything
from 500 to 524 (24 cycles being the longest any 1 instruction takes in the
Z80).
Use the mz80GetElapsedTicks() call for more accurate cycle counting. Of course,
this is only if you have *NOT* included the -nt option.
If you pass FALSE to the mz80GetElapsedTicks() function, the internal CPU
elapsed tick clock will not be reset. The elapsed tick counter is something
that continues to increase every emulated instruction, and like an odometer,
will keep counting unless you pass TRUE to mz80GetElapsedTicks(), of which
case it will return you the current value of the elapsed ticks and set it to
0 when complete.
NOTE: The bigger value you pass to mz80exec, the greater benefit you get out
of the virtual registers persisting within the emulator, and it will run
faster. Pass in a value that is large enough to take advantage of it, but
not so often that you can't handle nmi or int's properly.
If you wish to create a virtual NMI, call mz80nmi(), and it will be taken
the next time you call mz80exec, or alternately if you have a handler call
mz80nmi/mz80int(), the interrupt will be taken upon return. Note that
mz80nmi() doesn't actually execute any code - it only primes the emulator to
begin executing NMI/INT code.
NOTE: mz80int() is defined with a UINT32 as a formal parameter. Depending
upon what interrupt mode you're executing in (described later), it may or may
not take a value.
NMI's can interrupt interrupts, but not the other way around - just like a
real Z80. If your program is already in an interrupt, another one will not be
taken. The same holds true for an NMI - Just like a real Z80!
MUTLI-PROCESSOR NOTES
---------------------
Doing multi processor support is a bit trickier, but is still fairly straight-
forward.
For each processor to be emulated, go through steps 1-7 above - giving each
CPU its own memory space, register storage, and read/write handlers.
EXECUTION OF MULTI-CPUS:
-------------------------
When you're ready to execute a given CPU, do the following:
mz80SetContext(contextPointer);
This will load up all information saved before into the emulator and ready it
for execution. Then execute step 7 above to do your virtual NMI's, interrupts,
etc... All CPU state information is saved within a context.
When the execution cycle is complete, do the following to save the updated
context away for later:
mz80GetContext(contextPointer);
Give each virtual processor a slice of time to execute. Don't make the values
too small or it will spend its time swapping contexts. While this in itself
isn't particularly CPU expensive, the more time you spend executing the better.
mz80 Keeps all of the Z80 register in native x86 register (including most
of the flags, HL, BC, and A). If no context swap is needed, then you get the
added advantage of the register storage. For example, let's say you were
running two Z80s - one at 2.0MHZ and one at 3.0MHZ. An example like this
might be desirable:
mz80SetContext(cpu1Context); // Set CPU #1's information
mz80exec(2000); // 2000 Instructions for 2.0MHZ CPU
mz80GetContext(cpu1Context); // Get CPU #1's state info
mz80SetContext(cpu2Context); // Set CPU #2's state information
mz80exec(3000); // 3000 Instructions for 3.0MHZ CPU
mz80GetContext(cpu2Context); // Get CPU #2's state information
This isn't entirely realistic, but if you keep the instruction or timing
ratios between the emulated CPUs even, then timing is a bit more accurate.
NOTE: If you need to make a particular CPU give up its own time cycle because
of a memory read/write, simply trap a particular address (say, a write to a
slave processor) and call mz80ReleaseTimeslice(). It will not execute any
further instructions, and will give up its timeslice. Put this in your
read/write memory trap.
NOTE: You are responsible for "holding back" the processor emulator from
running too fast.
INTERRUPTS
----------
The Z80 has three interrupt modes: IM 0 - IM 2. Each act differently. Here's
a description of each:
IM 0
This mode will cause the Z80 to be able to pull a "single byte instruction"
off the bus when an interrupt occurs. Since we're not doing bus cycle
emulation, it acts identically to mode 1 (described below). The formal
parameter to mz80int() is ignored. There is really no point in actually
emulating the instruction execution since any instruction that would be
executed would be a branch instruction!
IM 1
This mode is the "default" mode that the Z80 (and mz80 for that matter) comes
up in. When you call mz80reset(), the interrupt address is set to 38h and
the NMI address is set to 66h. So when you're in IM 1 and mz80int() is
called, the formal parameter is ignored and the z80intAddr/z80nmiAddr values
are appropriately loaded into the program counter.
IM 2
This mode causes the Z80 to read the upper 8 bits from the current value
of the "I" register, and the lower 8 bits from the value passed into mz80int().
So, if I contained 35h, and you did an mz80int(0x64), then an interrupt at
address 3564h would be taken. Simple!
OTHER GOODIES
-------------
MZ80 Has a nice feature for allowing the same handler to handle different
data regions on a single handler. Here's an example:
struct PokeyDataStruct Pokey1;
struct PokeyDataStruct Pokey2;
struct MemoryWriteByte GameWrite[] =
{
{0x1000, 0x100f, PokeyHandler, Pokey1},
{0x1010, 0x101f, PokeyHandler, Pokey2},
{(UINT32) -1, (UINT32) -1, NULL}
};
void PokeyHandler(UINT32 dwAddr, UINT8 bData, struct sMemoryWriteByte *psMem)
{
struct PokeyDataStruct *psPokey = psMem->pUserArea;
// Do stuff with psPokey here....
}
This passes in the pointer to the sMemoryWriteByte structure that caused
the handler to be called. The pUserArea is a user defined address that can
be anything. It is not necessary to fill it in with anything or even
initialize it if the handler doesn't actually use it.
This allows a single handler to handle multiple data references. This is
particularly useful when handling sound chip emulation, where there might
be more than one of a given device. Sure beats having multiple unique
handlers that are identical with the exception of the data area where it
writes! This allows a good deal of flexibility.
The same construct holds for MemoryReadByte, z80PortRead, and z80PortWrite,
so all can take advantage of this feature.
SHARED MEMORY FEATURES
----------------------
MZ80 Also has another useful feature for dealing with shared memory regions:
UINT8 bSharedRAM[0x100];
struct MemoryWriteByte Processor1[] =
{
{0x1000, 0x10ff, NULL, bSharedRAM},
{(UINT32) -1, (UINT32) -1, NULL}
};
struct MemoryWriteByte Processor2[] =
{
{0x1000, 0x10ff, NULL, bSharedRAM},
{(UINT32) -1, (UINT32) -1, NULL}
};
If the handler address is NULL, mz80 will look at the pUserArea field as a
pointer to RAM to read from/write to. This comes in extremely handy when you
have an emulation that requires two or more processors writing to the same
memory block. And it's lots faster than creating a handler that writes to
a common area as well.
DEBUGGING
---------
Several new functions have been added to mz80 that assist the emulator
author by providing a standard set of functions for register access:
UINT8 mz80SetRegisterValue(void *pContext, UINT32 dwRegister, UINT32 dwValue)
This allows setting of any register within the Z80. The register field can be
one of the following values (defined in mz80.h):
CPUREG_PC
CPUREG_Z80_AF
CPUREG_Z80_BC
CPUREG_Z80_DE
CPUREG_Z80_HL
CPUREG_Z80_AFPRIME
CPUREG_Z80_BCPRIME
CPUREG_Z80_DEPRIME
CPUREG_Z80_HLPRIME
CPUREG_Z80_IX
CPUREG_Z80_IY
CPUREG_Z80_SP
CPUREG_Z80_I
CPUREG_Z80_R
CPUREG_Z80_A
CPUREG_Z80_B
CPUREG_Z80_C
CPUREG_Z80_D
CPUREG_Z80_E
CPUREG_Z80_H
CPUREG_Z80_L
CPUREG_Z80_F
CPUREG_Z80_CARRY
CPUREG_Z80_NEGATIVE
CPUREG_Z80_PARITY
CPUREG_Z80_OVERFLOW
CPUREG_Z80_HALFCARRY
CPUREG_Z80_ZERO
CPUREG_Z80_SIGN
CPUREG_Z80_IFF1
CPUREG_Z80_IFF2
Each individual register's value can be set, including the flags at the end.
The only valid values for the flags are 1 and 0. Setting these will
automatically adjust the "F" register.
If pContext is NULL, then the registers in the currently active context are
changed. If pContext points to a non-NULL area, that area is assumed to be
a CONTEXTMZ80 structure where the new register value will be written.
If mz80SetRegisterValue() returns a nonzero value, either the register value
or register is out of range or invalid.
UINT32 mz80GetRegisterValue(void *pContext, UINT32 dwRegister)
This returns the value of the register given on input (listed above as
CPUREG_Z80_xxxxx). Flag values will be 1 or 0.
If pContext is NULL, then the registers in the currently active context are
read. If pContext points to a non-NULL area, that area is assumed to be
a CONTEXTMZ80 structure from which register values are pulled.
UINT32 mz80GetRegisterTextValue(void *pContext, UINT32 dwRegister,
UINT8 *pbTextArea)
This returns the textual representation of the value of a given register.
It is a text printable string that can be used in sprintf() statements and
the like. This function is useful because different representations for
registers (like flags) can be a group of 8 flag bytes instead of a single
value.
On entry, pContext being set to NULL indicates that mz80 should get the
register value from the currently active context. Otherwise, it is assumed
to be pointing to a CONTEXTMZ80 structure, which contains the value of the
registers to be read.
pbTextArea points to a buffer where the value text can be written. This points
to a user supplied buffer.
On exit, if any nonzero value is encountered, either the register # is out
of range or pbTextArea is NULL.
UINT8 *mz80GetRegisterName(UINT32 dwRegister)
This returns a pointer to the textual name of the register passed in. NULL
Is returned if the register index (CPUREG_Z80_xxxx table described above) is
out of range. DO NOT MODIFY THE TEXT! It is static data.
FINAL NOTES
-----------
I have debugged MZ80.ASM to the best of my abilities. There might still be
a few bugs floating around in it, but I'm not aware of any. I've validated
all instructions (That I could) against a custom built Z80 on an ISA card
(that fits in a PC) so I'm quite confident that it works just like a real
Z80.
If you see any problems, please point them out to me, as I am eager to make
mz80 the best emulator that I can.
If you have questions, comments, etc... about mz80, please don't hesitate
to send me an email. And if you use mz80 in your emulator, I'd love to take
a look at your work. If you have special needs, or need implementation
specific hints, feel free to email me, Neil Bradley (neil@synthcom.com). I
will do my best to help you.
Enjoy!
Neil Bradley
neil@synthcom.com
View Git Blame Copy Permalink