Fix EN comments in kernel

- Minor tweaks.
- Includes work by @rgimad.

git-svn-id: svn://kolibrios.org@10069 a494cfbc-eb01-0410-851d-a64ba20cac60

kernel/trunk/blkdev/ahci.inc

@@ -44,7 +44,7 @@ bit_AHCI_HBA_CAP2_BOH   = 0        ; Supports BIOS/OS Handoff
 
 bit_AHCI_HBA_BOHC_BOS  = 0         ; BIOS-Owned Semaphore (BIOS owns controller)
 bit_AHCI_HBA_BOHC_OOS  = 1         ; OS-Owned Semaphore (OS owns controller)
-bit_AHCI_HBA_BOHC_BB   = 4         ; BIOS Busy (polling bit while BIOS cleans up
+bit_AHCI_HBA_BOHC_BB   = 4         ; BIOS Busy (polling bit while BIOS cleans up)
 
 bit_AHCI_HBA_GHC_AHCI_ENABLE      = 31  ; Enable AHCI mode
 bit_AHCI_HBA_GHC_RESET            = 0   ; Reset HBA
@@ -167,7 +167,7 @@ struct PORT_DATA
     ctr_ptr       dd ? ; pointer to controller to which port belongs
 ends
 
-; Register FIS – Host to Device
+; Register FIS - Host to Device
 struct FIS_REG_H2D
         fis_type      db ?       ; FIS_TYPE_REG_H2D
         flags        db ?       ; 0bCRRRPPPP, C - 1: Command, 0: Control
@@ -194,7 +194,7 @@ struct FIS_REG_H2D
                       rb 4       ; Reserved
 ends
 
-; Register FIS – Device to Host
+; Register FIS - Device to Host
 struct FIS_REG_D2H
     fis_type      db ?           ; FIS_TYPE_REG_D2H
 
@@ -221,7 +221,7 @@ struct FIS_REG_D2H
                   rb 4           ; Reserved
 ends
 
-; Data FIS – Bidirectional
+; Data FIS - Bidirectional
 struct FIS_DATA
     fis_type      db ?           ; FIS_TYPE_DATA
     flags        db ?           ; 0bRRRRPPPP, R - Reserved, P - Port multiplier
@@ -230,7 +230,7 @@ struct FIS_DATA
     data          rd 1           ; Payload
 ends
 
-; PIO Setup – Device to Host
+; PIO Setup - Device to Host
 struct FIS_PIO_SETUP
     fis_type      db ?           ; FIS_TYPE_PIO_SETUP
 
@@ -259,7 +259,7 @@ struct FIS_PIO_SETUP
                   rb 2           ; Reserved
 ends
 
-; DMA Setup – Device to Host
+; DMA Setup - Device to Host
 struct FIS_DMA_SETUP
     fis_type      db ?           ; FIS_TYPE_DMA_SETUP
     flags        db ?           ; 0bAIDRPPPP, A - Auto-activate. Specifies if DMA Activate FIS is needed,

kernel/trunk/blkdev/disk_cache.inc

@@ -16,8 +16,8 @@
 ; allocated/freed sector-wise, so items for sequential sectors can be
 ; scattered over all the cache.
 ; So read/write functions allocate a temporary buffer which is
-; 1) not greater than half of free memory and
-; 2) not greater than the following constant.
+; (1) not greater than half of free memory and
+; (2) not greater than the following constant.
 CACHE_MAX_ALLOC_SIZE = 4 shl 20
 
 ; Legacy interface for filesystems fs_{read,write}32_{sys,app}

kernel/trunk/blkdev/fdc.inc

@@ -11,7 +11,7 @@ uglobal
   dmamode         db 0x0
 endg
 
-fdc_init:                               ;start with clean tracks.
+fdc_init:                               ; start with clean tracks
         mov     edi, OS_BASE+0xD201
         mov     al, 0
         mov     ecx, 160
@@ -28,9 +28,9 @@ save_image:
         call    floppy_read_bootsector
         cmp     [FDC_Status], 0
         jne     .unnecessary_save_image
-        mov     [FDD_Track], 0; Цилиндр
-        mov     [FDD_Head], 0; Сторона
-        mov     [FDD_Sector], 1; Сектор
+        mov     [FDD_Track], 0
+        mov     [FDD_Head], 0
+        mov     [FDD_Sector], 1
         mov     esi, RAMDISK
         call    SeekTrack
 .save_image_1:

kernel/trunk/blkdev/hd_drv.inc

@@ -505,16 +505,16 @@ IDE_common_irq_handler:
 ; Most of the time, we are here because we have requested
 ; a DMA transfer for the corresponding drive.
 ; However,
-; a) we can be here because IDE IRQ is shared with some other device,
+; (a) we can be here because IDE IRQ is shared with some other device,
 ;    that device has actually raised IRQ,
 ;    it has nothing to do with IDE;
-; b) we can be here because IDE controller just does not want
+; (b) we can be here because IDE controller just does not want
 ;    to be silent and reacts to something even though
 ;    we have, in theory, disabled IRQs.
 ; If the interrupt corresponds to our current request,
 ; remove the interrupt request and raise the event for the waiting code.
-; In the case a), just return zero - not our interrupt.
-; In the case b), remove the interrupt request and hope for the best.
+; In the case (a), just return zero - not our interrupt.
+; In the case (b), remove the interrupt request and hope for the best.
 ; DEBUGF 1, 'K : IDE_irq_handler %x\n', [IDE_common_irq_param]:2
         mov     ecx, [esp+4]
         mov     dx, [ecx+IDE_DATA.RegsBaseAddres]

kernel/trunk/blkdev/rd.inc

@@ -41,8 +41,8 @@ endg
         mov     ebx, eax
         stdcall disk_media_changed, eax, 1
 ; 2. We don't know actual size of loaded image,
-; so try to calculate it using partition structure,
-; assuming that file systems fill the real size based on contents of the partition.
+; so try to calculate it using partition structure, assuming
+; that file systems fill the real size based on contents of the partition.
 ; 2a. Prepare for loop over partitions.
         xor     eax, eax
         xor     ecx, ecx