ddk: update

git-svn-id: svn://kolibrios.org@6102 a494cfbc-eb01-0410-851d-a64ba20cac60

drivers/include/linux/interrupt.h

@@ -0,0 +1,71 @@
+/* interrupt.h */
+#ifndef _LINUX_INTERRUPT_H
+#define _LINUX_INTERRUPT_H
+
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/irqreturn.h>
+#include <linux/kref.h>
+/*
+ * These correspond to the IORESOURCE_IRQ_* defines in
+ * linux/ioport.h to select the interrupt line behaviour.  When
+ * requesting an interrupt without specifying a IRQF_TRIGGER, the
+ * setting should be assumed to be "as already configured", which
+ * may be as per machine or firmware initialisation.
+ */
+#define IRQF_TRIGGER_NONE	0x00000000
+#define IRQF_TRIGGER_RISING	0x00000001
+#define IRQF_TRIGGER_FALLING	0x00000002
+#define IRQF_TRIGGER_HIGH	0x00000004
+#define IRQF_TRIGGER_LOW	0x00000008
+#define IRQF_TRIGGER_MASK	(IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW | \
+				 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)
+#define IRQF_TRIGGER_PROBE	0x00000010
+
+/*
+ * These flags used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * IRQF_SHARED - allow sharing the irq among several devices
+ * IRQF_PROBE_SHARED - set by callers when they expect sharing mismatches to occur
+ * IRQF_TIMER - Flag to mark this interrupt as timer interrupt
+ * IRQF_PERCPU - Interrupt is per cpu
+ * IRQF_NOBALANCING - Flag to exclude this interrupt from irq balancing
+ * IRQF_IRQPOLL - Interrupt is used for polling (only the interrupt that is
+ *                registered first in an shared interrupt is considered for
+ *                performance reasons)
+ * IRQF_ONESHOT - Interrupt is not reenabled after the hardirq handler finished.
+ *                Used by threaded interrupts which need to keep the
+ *                irq line disabled until the threaded handler has been run.
+ * IRQF_NO_SUSPEND - Do not disable this IRQ during suspend.  Does not guarantee
+ *                   that this interrupt will wake the system from a suspended
+ *                   state.  See Documentation/power/suspend-and-interrupts.txt
+ * IRQF_FORCE_RESUME - Force enable it on resume even if IRQF_NO_SUSPEND is set
+ * IRQF_NO_THREAD - Interrupt cannot be threaded
+ * IRQF_EARLY_RESUME - Resume IRQ early during syscore instead of at device
+ *                resume time.
+ * IRQF_COND_SUSPEND - If the IRQ is shared with a NO_SUSPEND user, execute this
+ *                interrupt handler after suspending interrupts. For system
+ *                wakeup devices users need to implement wakeup detection in
+ *                their interrupt handlers.
+ */
+#define IRQF_SHARED		0x00000080
+#define IRQF_PROBE_SHARED	0x00000100
+#define __IRQF_TIMER		0x00000200
+#define IRQF_PERCPU		0x00000400
+#define IRQF_NOBALANCING	0x00000800
+#define IRQF_IRQPOLL		0x00001000
+#define IRQF_ONESHOT		0x00002000
+#define IRQF_NO_SUSPEND		0x00004000
+#define IRQF_FORCE_RESUME	0x00008000
+#define IRQF_NO_THREAD		0x00010000
+#define IRQF_EARLY_RESUME	0x00020000
+#define IRQF_COND_SUSPEND	0x00040000
+
+#define IRQF_TIMER		(__IRQF_TIMER | IRQF_NO_SUSPEND | IRQF_NO_THREAD)
+
+extern int early_irq_init(void);
+extern int arch_probe_nr_irqs(void);
+extern int arch_early_irq_init(void);
+
+#endif