include '../macros.inc' MEOS_APP_START type_ethernet equ 1 CODE call draw_window still: mcall 10 ; wait here for event dec eax ; redraw request ? jz red dec eax ; key in buffer ? jz key dec eax ; button in buffer ? jz button jmp still red: ; redraw mcall 9, Proc_Info, -1 ; window redraw requested so get new window coordinates and size mov eax, [Proc_Info.box.left]; store the window coordinates into the Form Structure mov [Form + 2], ax ; x start position mov eax, [Proc_Info.box.top]; mov [Form + 6], ax ; ystart position mov eax, [Proc_Info.box.width] ; mov [Form], ax ; window width mov eax, [Proc_Info.box.height] ; mov [Form + 4] ,ax ; window height call draw_window ; go redraw window now jmp still key: ; key mcall 2 ; just read it and ignore jmp still button: ; button mcall 17 ; get id cmp ah, 1 ; button id = 1 ? jne @f mcall -1 ; close this program @@: cmp eax,0x0000ff00 jg load_drv cmp ah, 4 je hook cmp ah, 5 je reset cmp ah, 6 je unload jmp still load_drv: shr eax, 16 mov word [selected], ax mov bl , 6 ; get a dword mov bh , ah ; bus mov ch , al ; dev mov cl , 0 ; offset to device/vendor id mcall 62 ; get ID's mov word [PCI_Vendor], ax shr eax, 16 mov word [PCI_Device], ax call get_drv_ptr mov ecx, eax mcall 68, 16 mov [IOCTL.handle], eax call draw_window cmp [IOCTL.handle], 0 jne still mcall 4, 20 shl 16 + 30, 1 shl 31 + 0x00ff0000 , load_error jmp still hook: mov ax , [selected] test ax , ax jz still mov [hardwareinfo.pci_dev], al mov [hardwareinfo.pci_bus], ah mov [IOCTL.io_code], 1 ; SRV_HOOK mov [IOCTL.inp_size], 3 mov [IOCTL.input], hardwareinfo mov [IOCTL.out_size], 0 mov [IOCTL.output], 0 mcall 68, 17, IOCTL mov byte[drivernumber], al jmp still reset: movzx ebx, byte[drivernumber] mcall 73,,2 jmp still unload: movzx ebx, byte[drivernumber] mcall 73,,3 jmp still draw_window: mcall 12, 1 ; start of draw mcall 0, dword [Form], dword [Form + 4], 0x13ffffff, 0x805080d0, title call Get_PCI_Info ; get pci version and last bus, scan for and draw each pci device cmp edx, 20 shl 16 + 110 je .nonefound mcall 4, 20 shl 16 + 100, 1 shl 31 + 0x00000000 , caption cmp [selected], 0 jz .done cmp [IOCTL.handle] ,0 jz .done mcall 8, 18 shl 16 + 100, 35 shl 16 + 18, 4, 0x00007f00 mcall ,, 55 shl 16 + 18, 5, 0x0000007f mcall ,, 75 shl 16 + 18, 6, 0x007f0000 mcall 4, 33 shl 16 + 42, 1 shl 31 + 0x00ffffff , btn_start mcall , 33 shl 16 + 62, , btn_reset mcall , 36 shl 16 + 82, , btn_stop ; mcall , 140 shl 16 + 62, 1 shl 31 + 0x00000000 , devicename jmp .done .nonefound: mcall 4, 20 shl 16 + 30, 1 shl 31 + 0x00ff0000 , nonefound .done: mcall 12, 2 ; end of draw ret ;------------------------------------------------------------------ ;* Gets the PCI Version and Last Bus Get_PCI_Info: mcall 62, 0 mov word [PCI_Version], ax mcall 62, 1 mov byte [PCI_LastBus], al ;---------------------------------------------------------- ;* Get all devices on PCI Bus mov edx, 20 shl 16 + 110 ; set start write position cmp al , 0xff ; 0xFF means no pci bus found jne Pci_Exists ; ret ; if no bus then leave Pci_Exists: mov byte [V_Bus], 0 ; reset varibles mov byte [V_Dev], 0 ; Start_Enum: mov bl , 6 ; get a dword mov bh , byte [V_Bus] ; bus of pci device mov ch , byte [V_Dev] ; device number/function mov cl , 0 ; offset to device/vendor id mcall 62 ; get ID's cmp ax, 0 ; Vendor ID should not be 0 or 0xFFFF je nextDev ; check next device if nothing exists here cmp ax, 0xffff ; je nextDev ; mov word [PCI_Vendor], ax ; There is a device here, save the ID's shr eax, 16 ; mov word [PCI_Device], ax ; mov bl , 4 ; Read config byte mov bh , byte [V_Bus] ; Bus # mov ch , byte [V_Dev] ; Device # on bus mov cl , 0x08 ; Register to read (Get Revision) mcall 62 ; Read it mov byte [PCI_Rev], al ; Save it mov cl , 0x0b ; Register to read (Get class) mcall 62 ; Read it mov byte [PCI_Class], al ; Save it mov cl , 0x0a ; Register to read (Get Subclass) mcall 62 ; Read it mov byte [PCI_SubClass], al ; Save it mov cl , 0x09 ; Register to read (Get Interface) mcall 62 ; Read it mov [PCI_Interface], al ; Save it mov cl , 0x3c ; Register to read (Get IRQ) @@: mcall 62 ; Read it mov [PCI_IRQ], al ; Save it ; ; inc byte [total] ; one more device found cmp byte [PCI_Class],2 jne nextDev call Print_New_Device ; print device info to screen nextDev: add byte [V_Dev], 8 ; lower 3 bits are the function number jnz Start_Enum ; jump until we reach zero mov byte [V_Dev], 0 ; reset device number inc byte [V_Bus] ; next bus mov al , byte [PCI_LastBus] ; get last bus cmp byte [V_Bus], al ; was it last bus jbe Start_Enum ; if not jump to keep searching ret ;------------------------------------------------------------------ ;* Print device info to screen Print_New_Device: push edx ; Magic ! (to print a button...) mov ebx, 18 shl 16 mov bx , [Form] sub bx , 36 mov cx , dx dec cx shl ecx, 16 add ecx, 9 movzx edx, byte [V_Bus] shl dx , 8 mov dl , byte [V_Dev] mov esi, 0x0000c0ff ; color: yellow if selected, blue otherwise cmp word [selected], dx jne @f mov esi, 0x00c0c000 @@: shl edx, 8 or dl , 0xff mcall 8 pop edx xor esi, esi ; Color of text movzx ecx, word [PCI_Vendor] ; number to be written mcall 47, 0x00040100 ; Write Vendor ID add edx, (4*6+18) shl 16 movzx ecx, word [PCI_Device] ; get Vendor ID mcall ; Draw Vendor ID to Window add edx, (4*6+18) shl 16 movzx ecx, byte [V_Bus] ; get bus number mcall ,0x00020100 ; draw bus number to screen add edx, (2*6+18) shl 16 movzx ecx, byte [V_Dev] ; get device number shr ecx, 3 ; device number is bits 3-7 mcall ; Draw device Number To Window add edx, (2*6+18) shl 16 movzx ecx, byte [PCI_Rev] ; get revision number mcall ; Draw Revision to screen add edx, (2*6+18) shl 16 movzx ecx, [PCI_IRQ] cmp cl , 0x0f ; IRQ must be between 0 and 15 ja @f mcall @@: ; ;Write Names movzx ebx, dx ; Set y position or ebx, 230 shl 16 ; set Xposition ;------------------------------------------------------------------ ; Prints the Vendor's Name based on Vendor ID ;------------------------------------------------------------------ mov edx, VendorsTab mov cx , word[PCI_Vendor] .fn: mov ax , [edx] add edx, 6 test ax , ax jz .find cmp ax , cx jne .fn .find: mov edx, [edx - 4] mcall 4,, 0x80000000 ; lets print the vendor Name ;------------------------------------------------------------------ ; Get description based on Class/Subclass ;------------------------------------------------------------------ mov eax, dword [PCI_Class] and eax, 0xffffff xor edx, edx xor esi, esi .fnc: inc esi mov ecx, [Classes + esi * 8 - 8] cmp cx , 0xffff je .endfc cmp cx , ax jne .fnc test ecx, 0xff000000 jz @f mov edx, [Classes + esi * 8 - 4] jmp .fnc @@: cmp eax, ecx jne .fnc xor edx, edx .endfc: test edx, edx jnz @f mov edx, [Classes + esi * 8 - 4] @@: add ebx, 288 shl 16 mcall 4,, 0x80000000,, 32 ; draw the text movzx edx, bx ; get y coordinate add edx, 0x0014000A ; add 10 to y coordinate and set x coordinate to 20 ;------------------------------------------------------------------ ; Print Driver Name ;------------------------------------------------------------------ push edx add ebx, 120 shl 16 push ebx call get_drv_ptr mov edx, eax pop ebx mcall 4,,0x80000000 ; lets print the vendor Name pop edx ret get_drv_ptr: mov eax, driverlist ; eax will be the pointer to latest driver title mov ebx, driverlist ; ebx is the current pointer mov ecx, dword[PCI_Vendor] ; the device/vendor id of we want to find driverloop: inc ebx cmp byte[ebx],0 jne driverloop inc ebx ; the device/vendor id list for the driver eax is pointing to starts here. deviceloop: cmp dword[ebx],0 je nextdriver cmp dword[ebx],ecx je driverfound add ebx,4 jmp deviceloop nextdriver: add ebx,4 cmp dword[ebx],0 je nodriver mov eax,ebx jmp driverloop nodriver: mov eax, lbl_none ; lets print the vendor Name ret driverfound: ret include 'vendors.inc' include 'drivers.inc' ;------------------------------------------------------------------ ; DATA AREA DATA Form: dw 800 ; window width (no more, special for 800x600) dw 100 ; window x start dw 220 ; window height dw 100 ; window y start title db 'Network Driver Control Center', 0 caption db 'Vendor Device Bus Dev Rev IRQ Company Description DRIVER',0 ;lbl_1 db 'Hardware control',0 nonefound db 'No compatible devices were found!',0 btn_start db 'Start device',0 btn_reset db 'Reset device',0 btn_stop db 'Stop device',0 ;lbl_hdw_addr db 'hardware address:',0 ;lbl_type db 'type:',0 lbl_none db 'none',0 ;lbl_unknown db 'unknown',0 ;lbl_ethernet db 'ethernet',0 load_error db 'Could not load driver!',0 devicename db 'test' rb 64 db 0 IOCTL: .handle dd ? .io_code dd ? .input dd ? .inp_size dd ? .output dd ? .out_size dd ? drivernumber db ? MAC dp ? hardwareinfo: .type db 1 ; pci .pci_bus db ? .pci_dev db ? ;------------------------------------------------------------------ ; UNINITIALIZED DATA AREA UDATA type db ? selected dw ? V_Bus db ? V_Dev db ? PCI_Version dw ? PCI_LastBus db ? PCI_Vendor dw ? PCI_Device dw ? PCI_Bus db ? PCI_Dev db ? PCI_Rev db ? ; don`t change order!!! PCI_Class db ? PCI_SubClass db ? PCI_Interface db ? PCI_IRQ db ? Proc_Info process_information MEOS_APP_END