;*************************************************************** ; project name: PCI Device Enumeration ; target platform: KolibriOS ; compiler: flat assembler 1.68 ; version: 2.2 ; last update: December 2007 ; maintained by: Jason Delozier (cordata51@hotmail.com) ; Sergey Kuzmin (kuzmin_serg@list.ru) ; Mihailov Ilia (ghost.nsk@gmail.com) ; Artem Jerdev (art_zh@yahoo.com) ; project site: http://www.coolthemes.narod.ru/pcidev.html ;*************************************************************** ;Summary: This program will attempt to scan the PCI Bus ; and display basic information about each device ; connected to the PCI Bus. ;*************************************************************** ;HISTORY: ;keep dates in european format (dd/mm/yyyy), please ; '!' means big changes ; ;to-do: ; more vendors ; vendor's website ; Subsystem id and Subsystem vendor id detection ; Full device detection (like "ATI Radeon 9200") will increase app ; size a lot and probably it is function of particular drivers ;---------------------------------------------------------------- ;2.2: PCIDEV 31/12/2009 ;Author: Artem Jerdev ;Features: ; fixed ; * English in some comments ;) ; added ; * ! user-accessible PCI memory channels detection ; * ! ASCII-dump as PCI memory access demonstration ; optimization ; * (yet needed) ;---------------------------------------------------------------- ;2.1: PCIDEV ??/04/2007 ;Author: Mihailov Ilia aka Ghost ;Features: ; fixed ; * Some little bugs ; * Source code formating ; * PCI version normalized 0210 -> 2.10 ; added ; * + 13 vendor (total now 1000!) ; * + 3 class type ; * Fast call source ready ; * Device IRQ detection ; optimized ; * ! size optimized (61025 -> 32501 see added) ; * easy to add new vendor & class names ;---------------------------------------------------------------- ;2.0: PCIDEV 30/08/2006 ;(it differs a lot from the version 1.0, which was introduced 19 months ago) ;Author: Marat Zakiyanov aka Mario79 ; Sergey Kuzmin aka Wildwest ;Features: ; added ; * Detection of Interface by Mario79 ; * 122 vendor id's by Wildwest ; * Description is based on Class, SubClass and Interface now (PCI 3.0) by Wildwest ;---------------------------------------------------------------- ;1.31: PCIDEV 13/05/2006 ;Author: Jason Delozier ;Features: ; fixed ; * ! bug in Company Name look up code that would cause Unknown Name errors. ; * ! possible bugs, many instructions missing byte, word, dword prefixes ; * ! possible bug which could have occured after removing "PREVIOUSVERSIONLIST" ; entry in loop up code and not fixing jump parameters. ; added ; * comments to various parts of the code ; optimized ; * various parts of the source, too many to remember and mention. ; * changed entries for Subclasses in vendors.inc to Byte format, saves a little space. ;---------------------------------------------------------------- ;1.30: PCIDEV 11/05/2006 ;Author: Sergey Kuzmin aka Wildwest ;Features: ; added ; * 3 new vendor id's (ESS from Madis Kalme and 2 id's ; forgotten from 1.15 release: Broadcom -SiByte and Chaintech Comp.) ; changed ; * I don't know why other devs (Jason or Victor) changed window style ; to old ugly one, so I changed it back to skinned type 3. ; * the same goes to the use of macroc.inc - it is enabled again. ; deleted ; * there is no more label "PREVIOUSVERSIONLIST" - id's moved to the ; appropriate parts of global list. ;---------------------------------------------------------------- ;1.29: PCIDEV 30/04/2006 ;Author: Jason Delozier ;Features: ; fixed ; * ! bug that would not allow devices with device ; numbers > 16 to be displayed. ; added ; * ! another heading called "FNC" (function) which allows ; the multipurpose Device/Function varible to be split and ; displayed to the user properly. ; * horizontal bars to display for easier reading. ; optimized ; * vendor/description search routines for speed and space. ;---------------------------------------------------------------- ;1.25: PCIDEV 02/10/2005 ;Author: Sergey Kuzmin aka Wildwest ;Features: ; changed ; * ! Description is based on Class and SubClass ; now (PCI 3.0). The Names of Classes and SubClasses ; are in the end of Vendors.inc ; deleted ; * label "Descriptions" (names of Classes) ; ;---------------------------------------------------------------- ;1.20: PCIDEV 16/08/2005 ;Author: Victor Alberto Gil Hanla a.k.a. vhanla ;Features: ; added ; * ! many vendor lists (865) ; deleted ; * previous version's list ; changed ; * previous Company Name searching and printing ;---------------------------------------------------------------- ;1.15: PCIDEV 03/06/2005 ;Author: Sergey Kuzmin aka Wildwest ;Features: ; added ; * quantity of devices, ; * ! detection of Company Name based on Vendor ID, ; * database of VenID (35 ID's), ; * macros.inc for smaller size, ; changed ; * interface+(skinned window), ; * VenID before DevID in 'table'(was DevID before VenID) ;---------------------------------------------------------------- ;1.0: PCIDEV 30/01/2005 ;Author: Jason Delozier ;Features: ; able to ; * detect PCI version, ; * quantity of PCI buses, ; * Vendor&Device ID for appropriate Device on Bus; ; * detect Revision, Class and Subclass of Device, ; * and make Description based on Class ;------------------------------------------------------------- ;include '..\..\macros.inc' include 'macros.inc' MEOS_APP_START CODE call draw_window still: mcall 10 ; wait here for event dec eax ; redraw request ? jz red dec eax ; key in buffer ? jz key dec eax ; button in buffer ? jz button jmp still red: ; redraw mcall 9, Proc_Info, -1 ; window redraw requested so get new window coordinates and size mov eax, [Proc_Info.box.left]; store the window coordinates into the Form Structure mov [Form + 2], ax ; x start position mov eax, [Proc_Info.box.top]; mov [Form + 6], ax ; ystart position mov eax, [Proc_Info.box.width] ; mov [Form], ax ; window width mov eax, [Proc_Info.box.height] ; mov [Form + 4] ,ax ; window height call draw_window ; go redraw window now jmp still key: ; key mcall 2 ; just read it and ignore jmp still button: ; button mcall 17 ; get id cmp ah, 1 ; button id = 1 ? jne still mcall -1 ; close this program draw_window: mov byte [total], 0 mcall 12, 1 ; start of draw ; DRAW WINDOW mcall 0, dword [Form], dword [Form + 4], 0x13ffffff, 0x805080d0, title ; Insert horizontal bars in list area mov eax, 13 ; draw bar system function mov ebx, 18 ; set Xstart position of bar shl ebx, 16 ; mov bx, word [Form] ; get width of window sub bx, 32 ; bar is 32 pixels shorter then window width mov ecx, 119 * 65536 + 10 ; set Ystart(109) and Height(10) of bar 109 mov edx, 0xC0C0C0 ; set color of bar again: ;begin draw bar loop mcall ; draw bar to window area shr ecx, 16 ; move the Ystart position to working area add ecx, 34 ; add 34 pixels to Y Start (moves bar down) cmp cx, word [Form + 4] ; is the Ystart position outside of window area jae nomo ; if so stop drawing bars sub ecx, 14 ; if not, we only need 20 pixels between bar tops shl ecx, 16 ; set that values as Ystart add ecx, 10 ; Bar Height is always 10 pixels jmp again ; draw another bar nomo: ;done drawing bars here ; start PCI stuff call Get_PCI_Info ; get pci version and last bus, scan for and draw each pci device ; Window inteface mov cx, [PCI_Version] add ch, '0' mov [PCIWin + 85], ch ; 0xBADCODE but it works ! mov ch, cl shr cl, 4 and ch, 0x0f add cx, '00' mov [PCIWin + 87], cx mov cl, [PCI_LastBus] ; will only work if [PCI_LastBus] < 10 add cl, '0' mov [PCIWin + 106], cl mov edx, PCIWin mov ebx, 20 * 65536 + 25 ; x start, ystart of text mov ecx, 0x224466 ; color of text mov eax, 4 @@: movzx esi, byte[edx] inc edx mcall add ebx, 10 add edx, esi cmp byte[edx], -1 jne @b ; Quantity of devices... movzx ecx, byte [total] ; number to draw mcall 47, 0x00020000,,150 * 65536 + 65, 0x224466 call Try_MMIO mcall 12, 2 ; end of draw ret ;------------------------------------------------------------------ ;* Gets the PCI Version and Last Bus Get_PCI_Info: mcall 62, 0 mov word [PCI_Version], ax mcall 62, 1 mov byte [PCI_LastBus], al ;---------------------------------------------------------- ;* Get all devices on PCI Bus cmp al, 0xff ; 0xFF means no pci bus found jne Pci_Exists ; ret ; if no bus then leave Pci_Exists: mov byte [V_Bus], 0 ; reset varibles mov byte [V_Dev], 0 ; mov edx, 20 * 65536 + 110 ; set start write position Start_Enum: mov bl, 6 ; get a dword mov bh, byte [V_Bus] ; bus of pci device mov ch, byte [V_Dev] ; device number/function mov cl, 0 ; offset to device/vendor id mcall 62 ; get ID's cmp ax, 0 ; Vendor ID should not be 0 or 0xFFFF je nextDev ; check next device if nothing exists here cmp ax, 0xffff ; je nextDev ; mov word [PCI_Vendor], ax ; There is a device here, save the ID's shr eax, 16 ; mov word [PCI_Device], ax ; mov bl, 4 ; Read config byte mov bh, byte [V_Bus] ; Bus # mov ch, byte [V_Dev] ; Device # on bus mov cl, 0x08 ; Register to read (Get Revision) mcall 62 ; Read it mov byte [PCI_Rev], al ; Save it mov cl, 0x0b ; Register to read (Get class) mcall 62 ; Read it mov byte [PCI_Class], al ; Save it mov cl, 0x0a ; Register to read (Get Subclass) mcall 62 ; Read it mov byte [PCI_SubClass], al; Save it ; by Mario79 august 2006 mov cl, 0x09 ; Register to read (Get Interface) mcall 62 ; Read it mov [PCI_Interface], al ; Save it ; ; by Ghost april 2007 mov cl, 0x3c ; Register to read (Get IRQ) @@: mcall 62 ; Read it mov [PCI_IRQ], al ; Save it ; inc byte [total] ; one more device found call Print_New_Device ; print device info to screen nextDev: inc byte [V_Dev] ; next device on this bus jnz Start_Enum ; jump until we reach zero ;(used to be JNO which caused bug!!! 30-4-2006, JMD) mov byte [V_Dev], 0 ; reset device number inc byte [V_Bus] ; next bus mov al, byte [PCI_LastBus] ; get last bus cmp byte [V_Bus], al ; was it last bus jbe Start_Enum ; if not jump to keep searching ret ;------------------------------------------------------------------ ;* Print device info to screen Print_New_Device: xor esi, esi ; default text color ; by art_zh December 2009 mov ch, byte [V_Bus] mov cl, byte [V_Dev] mcall 62, 11 ; detect uMMIO cmp eax, -2 je no_ummio_here mov esi, 0x990033 ; highlighted text color mov bh, byte [V_Bus] mov bl, byte [V_Dev] mov byte [MMIO_Bus], bh mov byte [MMIO_Dev], bl add bh,'0' mov [PCIWin + 129], bh ; uMMIO bus mov al, bl shr al, 1 shr al, 1 shr al, 1 add al,'0' mov [PCIWin + 131], al ; uMMIO device and bl, 7 add bl, '0' mov [PCIWin + 133], bl ; uMMIO function no_ummio_here: movzx ecx,word [PCI_Vendor] ; Pointer to number to be written mcall 47, 0x00040100 ; Write Vendor ID and edx, 0xFFFF ;***************************************** or edx, 54 * 65536 ; X start becomes 54 movzx ecx, word [PCI_Device] ; get Vendor ID mcall ; Draw Vendor ID to Window and edx, 0xFFFF ;***************************************** or edx, 98 * 65536 ; X start becomes 98 movzx ecx, byte [V_Bus] ; get bus number mcall ,0x00020100 ; draw bus number to screen and edx, 0xFFFF ;***************************************** or edx, 128 * 65536 ; X start becomes 128 movzx ecx, byte [V_Dev] ; get device number shr ecx, 3 ; device number is bits 3-7 mcall ; Draw device Number To Window and edx, 0xFFFF ;***************************************** or edx, 155 * 65536 ; X start becomes 155 movzx ecx, byte [V_Dev] ; get Function number and ecx, 7 ; function is first 3 bits mcall ; Draw Function Number To Window and edx, 0xFFFF ;***************************************** or edx, 179 * 65536 ; X start becomes 179 movzx ecx, byte [PCI_Rev] ; get revision number mcall ; Draw Revision to screen and edx, 0xFFFF ;***************************************** or edx, 215*65536 ; X start becomes 215 movzx ecx, byte [PCI_Class] ; get PCI_Class mcall ; Draw Class to screen and edx, 0xFFFF ;***************************************** or edx, 250*65536 ; X start becomes 250 movzx ecx, byte [PCI_SubClass]; get sub class mcall ; Draw Sub Class to screen ; from Mario79 august 2006 and edx, 0xFFFF ;***************************************** or edx, 280 * 65536 ; X start becomes 280 movzx ecx, [PCI_Interface] ; get Interface mcall ; ; from Ghost april 2007 ;***************************************** movzx ecx, [PCI_IRQ] ; get Interface cmp cl, 0x0f ; IRQ between 0..15 ja @f and edx, 0xFFFF or edx, 310 * 65536 ; X start becomes 310 mcall @@: ; ;Write Names movzx ebx, dx ; Set y position or ebx, 340 * 65536 ; set Xposition to 340 ;------------------------------------------------------------------ ; Prints the Vendor's Name based on Vendor ID ; ; Modified on ??-04-2007 by Ghost for size ;------------------------------------------------------------------ mov edx, VendorsTab mov cx, word[PCI_Vendor] .fn: mov ax, [edx] add edx, 6 test ax, ax jz .find cmp ax, cx jne .fn .find: mov edx, [edx - 4] mcall 4,, 0x80000000 ; lets print the vendor Name ;------------------------------------------------------------------ ; Get description based on Class/Subclass ; ; Modified on ??-04-2007 by Ghost for size ;------------------------------------------------------------------ mov eax, dword [PCI_Class] and eax, 0xffffff xor edx, edx xor esi, esi .fnc: inc esi mov ecx, [Classes + esi * 8 - 8] cmp cx, 0xffff je .endfc cmp cx, ax jne .fnc test ecx, 0xff000000 jz @f mov edx, [Classes + esi * 8 - 4] jmp .fnc @@: cmp eax, ecx jne .fnc xor edx, edx .endfc: test edx, edx jnz @f mov edx, [Classes + esi * 8 - 4] @@: and ebx, 0x0000FFFF ; clear X position or ebx, 0x24E0000 ; set X position to 590 pixels mcall 4,, 0x80000000,, 32 ; draw the text movzx edx, bx ; get y coordinate add edx, 0x0014000A ; add 10 to y coordinate and set x coordinate to 20 mov [gr_pos], edx ret ;------------------------------------------------------------------ ; Get the user-MMIO related info ; ; Added on ??-12-2009 by art_zh ;------------------------------------------------------------------ Try_MMIO: xor ebx, ebx mov edx, ebx mov bh, byte [MMIO_BAR] or bx, 12 ; function 12 mov ecx, 4096 ; =1 page to map mcall 62 mov ecx, 0x80990022 ; print color : red mov bh, byte [MMIO_BAR] add bh, '0' cmp eax, -3 jne @f mov [bar_um+3], bh mov ebx, [gr_pos] mov edx, bar_um mcall 4 jmp mmio_next_bar @@: cmp eax, -4 jne @f mov [bar_io+3], bh mov ebx, [gr_pos] mov edx, bar_io mcall 4 jmp mmio_next_bar @@: mov [bar_ram+3], bh mov ebx, [gr_pos] mov edx, bar_ram mcall 4 mov edx, eax mov esi, 64 mov ecx, 0x099 ; dump color : blue add ebx, 10 mov [gr_pos], ebx mcall 4 mov ecx, eax ; release the tried page mcall 62,13 mmio_next_bar: mov bh, [MMIO_BAR] inc bh cmp bh,6 je @f mov [MMIO_BAR], bh add [gr_pos], 10 jmp Try_MMIO @@: xor bh,bh mov [MMIO_BAR], bh ret include 'VENDORS.INC' ;------------------------------------------------------------------ ; DATA AREA DATA Form: dw 800 ; window width (no more, special for 800x600) dw 100 ; window x start dw 420 ; window height dw 100 ; window y start title db 'PCI Device Enumerator v 2.2 by J.Delozier, S.Kuzmin, V.Hanla, M.Zakiyanov, A.Jerdev', 0 PCIWin mls \ ' Don`t forget to enable PCI Access to Applications in Setup Menu.',\ '',\ 'PCI Version = x.xx; Last PCI Bus = x',\ 'User MMIO channel = 0F.F:F ',\ 'Number of PCI units =',\ '',\ 'VenID DevID Bus# Dev# Fnc Rev Class Subclass/ IRQ Company Description',\ ' Interface',\ '----- ----- ---- ---- --- --- ----- --------- --- ------------------------------------------ ----------------' bar_ram db 'BARx: MMIO block', 0 bar_io db 'BARx: IO ports',0 bar_um db 'BARx: unmapped',0 bar_rom db 'BAR6: Onboard ROM', 0 ; << no ROM test yet ;------------------------------------------------------------------ ; UNINITIALIZED DATA AREA UDATA total db ? V_Bus db ? V_Dev db ? PCI_Version dw ? PCI_LastBus db ? PCI_Device dw ? PCI_Vendor dw ? PCI_Bus db ? PCI_Dev db ? PCI_Rev db ? ; don`t change order!!! PCI_Class db ? PCI_SubClass db ? PCI_Interface db ? PCI_IRQ db ? align 4 MMIO_Bus db ? MMIO_Dev db ? MMIO_BAR db 0 MMIO_Blk db 0 MMIO_Map rd 8 gr_pos dd ? Proc_Info process_information MEOS_APP_END