;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; ;; Copyright (C) KolibriOS team 2004-2014. All rights reserved. ;; ;; Distributed under terms of the GNU General Public License ;; ;; ;; ;; PCMCIA aka cardbus driver for KolibriOS ;; ;; Written by hidnplayr@gmail.com ;; ;; ;; ;; Many credits go to Paolo Franchetti for his HWTEST program ;; ;; (https://sites.google.com/site/pfranz73/) from which large ;; ;; parts of code have been borrowed. ;; ;; ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; This module detects and initialises all Cardbus/pc-card/PCMCIA cards. ; WARNING: Cards must be inserted before the driver starts, and shouldn't be removed. ; This module doesn't handle insertions and removals. format PE DLL native entry START CURRENT_API = 0x0200 COMPATIBLE_API = 0x0100 API_VERSION = (COMPATIBLE_API shl 16) + CURRENT_API CARDBUS_IO = 0xFC00 __DEBUG__ = 1 __DEBUG_LEVEL__ = 1 section '.flat' readable writable executable include '../proc32.inc' include '../struct.inc' include '../macros.inc' include '../pci.inc' include '../fdo.inc' ;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; ;; proc START ;; ;; ;; ;; (standard driver proc) ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;; proc START c, reason:dword, cmdline:dword cmp [reason], DRV_ENTRY jne .fail DEBUGF 1, "Loading cardbus driver\n" invoke RegService, my_service, service_proc call detect ret .fail: xor eax, eax ret endp ;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; ;; proc SERVICE_PROC ;; ;; ;; ;; (standard driver proc) ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;; proc service_proc stdcall, ioctl:dword mov edx, [ioctl] mov eax, [edx + IOCTL.io_code] ;------------------------------------------------------ cmp eax, 0 ;SRV_GETVERSION jne .fail cmp [edx + IOCTL.out_size], 4 jb .fail mov eax, [edx + IOCTL.output] mov [eax], dword API_VERSION xor eax, eax ret .fail: or eax, -1 ret endp align 4 proc detect locals last_bus dd ? card_bus dd ? bus dd ? devfn dd ? endl DEBUGF 1, "Searching for cardbus bridges...\n" xor eax, eax mov [bus], eax inc eax invoke PciApi cmp eax, -1 je .err mov [last_bus], eax inc eax mov [card_bus], eax .next_bus: and [devfn], 0 .next_dev: invoke PciRead32, [bus], [devfn], PCI_header.vendor_id test eax, eax jz .next cmp eax, -1 je .next invoke PciRead16, [bus], [devfn], PCI_header.subclass ; class & subclass cmp ax, 0x0607 je .found .next: test [devfn], 7 jnz .next_fn invoke PciRead8, [bus], [devfn], PCI_header.header_type test al, al js .next_fn or [devfn], 7 .next_fn: inc [devfn] cmp [devfn], 256 jb .next_dev mov eax, [bus] inc eax mov [bus], eax cmp eax, [last_bus] jna .next_bus DEBUGF 1, "Search complete\n" xor eax, eax inc eax ret .found: DEBUGF 1, "Found cardbus bridge: bus=0x%x, dev=0x%x\n", [bus], [devfn] invoke PciRead8, [bus], [devfn], PCI_header.header_type and al, not 0x80 ; Mask the multifunction device bit DEBUGF 1, "Header type=0x%x\n", eax:2 cmp al, 2 jne .next ; Write PCI and cardbus numbers invoke PciRead32, [bus], [devfn], PCI_header02.pci_bus_nr ; PCcard latency settings + Card bus number, PCI bus number and eax, 0xff000000 ; Keep original latency setting, clear the rest mov al, byte[bus] mov ah, byte[card_bus] mov ebx, [card_bus] shl ebx, 16 or eax, ebx DEBUGF 1, "Latency, bus,.. 0x%x\n", eax invoke PciWrite32, [bus], [devfn], PCI_header02.pci_bus_nr, eax ; set ExCA legacy mode base invoke PciWrite32, [bus], [devfn], 0x44, 1 ; Enable power invoke PciRead8, [bus], [devfn], 0x14 ; get capabilities offset movzx eax, al ; (A0 for TI bridges) DEBUGF 1, "Capabilities offset=0x%x\n", eax:2 add al, 4 ; Power management control/status invoke PciWrite16, [bus], [devfn], eax, 0x0100 ; Enable PME signaling, power state=D0 ; Enable Bus master, io space, memory space invoke PciWrite16, [bus], [devfn], PCI_header02.command, 0x0007 ; Write CardBus Socket/ExCA base address mov eax, 0x7f000000 push eax invoke PciWrite32, [bus], [devfn], PCI_header02.base_addr, eax ; base is 4 Kbyte aligned pop ebx invoke MapIoMem, ebx, 4096, 0x1b mov ecx, eax ; Check if a card is present in the socket mov eax, [ecx + 8] ; Socket present state register DEBUGF 1, "Socket present state reg: 0x%x\n", eax and al, 10110110b ; NotACard | CBCard | 16bitCard | CDetect1 | CDetect2 cmp al, 00100000b ; Check for inserted cardbus card je .CardbusInserted ; No card found... set PCI command back to 0 invoke PciWrite16, [bus], [devfn], PCI_header02.command, 0 ; To avoid conflicts with other sockets DEBUGF 1, "Cardbus KO\n" jmp .next .CardbusInserted: DEBUGF 1, "Card inserted\n" ;mov word[ecx + 0x802], 0x00F9 ; Assert reset, output enable, vcc=vpp=3.3V mov dword[ecx + 0x10], 0x33 ; Request 3.3V for Vcc and Vpp (Control register) ;push ecx ;mov esi, 10 ;invoke Sleep ;pop ecx ;mov byte[ecx + 0x803], 0x40 ; stop reset mov dword[ecx + 0xC], 0x4000 ; force Card CV test (Force register) ;;; WHY??? DEBUGF 1, "Resetting card\n" ; Next power up test can be deferred until before writing to Bridge control PCI reg 0x3E .waitpower: ; For TI, you can check that bits 8-11 in PCI reg 80h are all 0 test dword[ecx + 8], 1 shl 3 ; Test PWRCYCLE bit jz .waitpower ; Wait for power to go up DEBUGF 1, "Interface is powered up\n" ; Write MemBase-Limit 0 and 1, then IOBase-Limit 0 and 1 ; mem0 space limit = base => size is 4 kilobytes ; set to 0 the second interval (mem1 and IO1) ; IO0: size is 256 bytes irp regvalue, 0x7efff000, 0x7effffff, 0x7effe000, 0x7effe000, CARDBUS_IO, CARDBUS_IO + 0xFF, 0, 0 { common reg = 0x1C forward invoke PciWrite32, [bus], [devfn], reg, regvalue DEBUGF 1, "Writing 0x%x to 0x%x\n", regvalue, reg reg = reg + 4 } invoke PciWrite8, [bus], [devfn], PCI_header02.interrupt_line, 0xc ; IRQ line invoke PciRead16, [bus], [devfn], PCI_header02.bridge_ctrl ; Bridge control or ax, 0x0700 ; Enable write posting, both memory windows prefetchable invoke PciWrite16, [bus], [devfn], PCI_header02.bridge_ctrl, eax DEBUGF 1, "Write posting enabled\n" DEBUGF 1, "Bridge PCI registers:\n" rept 17 reg { invoke PciRead32, [bus], [devfn], 4*(reg-1) DEBUGF 1, "0x%x\n", eax } inc byte[0x80009021] ; LAST PCI bus count in kernel (dirty HACK!) mov ecx, 100 .waitactive: push ecx invoke PciRead32, [card_bus], 0, PCI_header02.vendor_id ; Check if the card is awake yet inc eax jnz .got_it mov esi, 2 invoke Sleep pop ecx dec ecx jnz .waitactive DEBUGF 1, "Timeout!\n" ; TODO: disable card/bridge again ? jmp .next .got_it: pop eax DEBUGF 1, "Card is enabled!\n" invoke PciWrite32, [card_bus], 0, PCI_header02.base_addr, CARDBUS_IO ; Supposing it's IO space that is needed invoke PciWrite8, [card_bus], 0, PCI_header02.interrupt_line, 0xC ; FIXME invoke PciWrite16, [card_bus], 0, PCI_header02.command, PCI_CMD_PIO or PCI_CMD_MMIO DEBUGF 1, "done\n" jmp .next .err: DEBUGF 1, "Error\n" xor eax, eax ret endp ; End of code data fixups end data include '../peimport.inc' my_service db 'CARDBUS',0 ; max 16 chars include zero include_debug_strings ; All data wich FDO uses will be included here