$Revision$ ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; ;; Copyright (C) KolibriOS team 2004-2007. All rights reserved. ;; ;; Distributed under terms of the GNU General Public License ;; ;; ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; Low-level driver for HDD access ; DMA support by Mario79 align 4 hd_read: ;----------------------------------------------------------- ; input : eax = block to read ; ebx = destination ;----------------------------------------------------------- and [hd_error], 0 push ecx esi edi ; scan cache ; mov ecx,cache_max ; entries in cache ; mov esi,HD_CACHE+8 call calculate_cache add esi,8 mov edi,1 hdreadcache: cmp dword [esi+4],0 ; empty je nohdcache cmp [esi],eax ; correct sector je yeshdcache nohdcache: add esi,8 inc edi dec ecx jnz hdreadcache call find_empty_slot ; ret in edi cmp [hd_error],0 jne return_01 ; DMA read is permitted if [allow_dma_access]=1 or 2 cmp [allow_dma_access], 2 ja .nodma cmp [dma_hdd], 1 jnz .nodma call hd_read_dma jmp @f .nodma: call hd_read_pio @@: ; lea esi,[edi*8+HD_CACHE] ; push eax call calculate_cache_1 lea esi,[edi*8+esi] ; pop eax mov [esi],eax ; sector number mov dword [esi+4],1 ; hd read - mark as same as in hd yeshdcache: mov esi,edi shl esi,9 ; add esi,HD_CACHE+65536 push eax call calculate_cache_2 add esi,eax pop eax mov edi,ebx mov ecx,512/4 cld rep movsd ; move data return_01: pop edi esi ecx ret align 4 hd_read_pio: push eax edx call wait_for_hd_idle cmp [hd_error],0 jne hd_read_error cli xor eax,eax mov edx,[hdbase] inc edx out dx,al ; ATAFeatures регистр "особенностей" inc edx inc eax out dx,al ; ATASectorCount счётчик секторов inc edx mov eax,[esp+4] out dx,al ; ATASectorNumber регистр номера сектора shr eax,8 inc edx out dx,al ; ATACylinder номер цилиндра (младший байт) shr eax,8 inc edx out dx,al ; номер цилиндра (старший байт) shr eax,8 inc edx and al,1+2+4+8 add al,byte [hdid] add al,128+64+32 out dx,al ; номер головки/номер диска inc edx mov al,20h out dx,al ; ATACommand регистр команд sti call wait_for_sector_buffer cmp [hd_error],0 jne hd_read_error cli push edi shl edi,9 ; add edi,HD_CACHE+65536 push eax call calculate_cache_2 add edi,eax pop eax mov ecx,256 mov edx,[hdbase] cld rep insw pop edi sti pop edx eax ret disable_ide_int: ; mov edx,[hdbase] ; add edx,0x206 ; mov al,2 ; out dx,al cli ret enable_ide_int: ; mov edx,[hdbase] ; add edx,0x206 ; mov al,0 ; out dx,al sti ret align 4 hd_write: ;----------------------------------------------------------- ; input : eax = block ; ebx = pointer to memory ;----------------------------------------------------------- push ecx esi edi ; check if the cache already has the sector and overwrite it ; mov ecx,cache_max ; mov esi,HD_CACHE+8 call calculate_cache add esi,8 mov edi,1 hdwritecache: cmp dword [esi+4],0 ; if cache slot is empty je not_in_cache_write cmp [esi],eax ; if the slot has the sector je yes_in_cache_write not_in_cache_write: add esi,8 inc edi dec ecx jnz hdwritecache ; sector not found in cache ; write the block to a new location call find_empty_slot ; ret in edi cmp [hd_error],0 jne hd_write_access_denied ; lea esi,[edi*8+HD_CACHE] ; push eax call calculate_cache_1 lea esi,[edi*8+esi] ; pop eax mov [esi],eax ; sector number yes_in_cache_write: mov dword [esi+4],2 ; write - differs from hd shl edi,9 ; add edi,HD_CACHE+65536 push eax call calculate_cache_2 add edi,eax pop eax mov esi,ebx mov ecx,512/4 cld rep movsd ; move data hd_write_access_denied: pop edi esi ecx ret align 4 cache_write_pio: ; call disable_ide_int call wait_for_hd_idle cmp [hd_error],0 jne hd_write_error cli xor eax,eax mov edx,[hdbase] inc edx out dx,al inc edx inc eax out dx,al inc edx mov eax,[esi] ; eax = sector to write out dx,al shr eax,8 inc edx out dx,al shr eax,8 inc edx out dx,al shr eax,8 inc edx and al,1+2+4+8 add al,byte [hdid] add al,128+64+32 out dx,al inc edx mov al,30h out dx,al sti call wait_for_sector_buffer cmp [hd_error],0 jne hd_write_error push ecx esi cli mov esi,edi shl esi,9 ; add esi,HD_CACHE+65536 ; esi = from memory position push eax call calculate_cache_2 add esi,eax pop eax mov ecx,256 mov edx,[hdbase] cld rep outsw sti ; call enable_ide_int pop esi ecx ret save_hd_wait_timeout: push eax mov eax,[timer_ticks] add eax,300 ; 3 sec timeout mov [hd_wait_timeout],eax pop eax ret align 4 check_hd_wait_timeout: push eax mov eax,[hd_wait_timeout] cmp [timer_ticks], eax jg hd_timeout_error pop eax mov [hd_error],0 ret ;iglobal ; hd_timeout_str db 'K : FS - HD timeout',0 ; hd_read_str db 'K : FS - HD read error',0 ; hd_write_str db 'K : FS - HD write error',0 ; hd_lba_str db 'K : FS - HD LBA error',0 ;endg hd_timeout_error: ; call clear_hd_cache ; call clear_application_table_status ; mov esi,hd_timeout_str ; call sys_msg_board_str DEBUGF 1,"K : FS - HD timeout\n" mov [hd_error],1 pop eax ret hd_read_error: ; call clear_hd_cache ; call clear_application_table_status ; mov esi,hd_read_str ; call sys_msg_board_str DEBUGF 1,"K : FS - HD read error\n" pop edx eax ret hd_write_error: ; call clear_hd_cache ; call clear_application_table_status ; mov esi,hd_write_str ; call sys_msg_board_str DEBUGF 1,"K : FS - HD write error\n" ret hd_write_error_dma: ; call clear_hd_cache ; call clear_application_table_status ; mov esi, hd_write_str ; call sys_msg_board_str DEBUGF 1,"K : FS - HD read error\n" pop esi ret hd_lba_error: ; call clear_hd_cache ; call clear_application_table_status ; mov esi,hd_lba_str ; call sys_msg_board_str DEBUGF 1,"K : FS - HD LBA error\n" jmp LBA_read_ret align 4 wait_for_hd_idle: push eax edx call save_hd_wait_timeout mov edx,[hdbase] add edx,0x7 wfhil1: call check_hd_wait_timeout cmp [hd_error],0 jne @f in al,dx test al,128 jnz wfhil1 @@: pop edx eax ret align 4 wait_for_sector_buffer: push eax edx mov edx,[hdbase] add edx,0x7 call save_hd_wait_timeout hdwait_sbuf: ; wait for sector buffer to be ready call check_hd_wait_timeout cmp [hd_error],0 jne @f in al,dx test al,8 jz hdwait_sbuf mov [hd_error],0 cmp [hd_setup],1 ; do not mark error for setup request je buf_wait_ok test al,1 ; previous command ended up with an error jz buf_wait_ok @@: mov [hd_error],1 buf_wait_ok: pop edx eax ret ; \begin{Mario79} align 4 wait_for_sector_dma_ide0: push eax push edx call save_hd_wait_timeout .wait: call change_task cmp [irq14_func], hdd_irq14 jnz .done call check_hd_wait_timeout cmp [hd_error], 0 jz .wait mov [irq14_func], hdd_irq_null mov dx, [IDEContrRegsBaseAddr] mov al, 0 out dx, al .done: pop edx pop eax ret align 4 wait_for_sector_dma_ide1: push eax push edx call save_hd_wait_timeout .wait: call change_task cmp [irq15_func], hdd_irq15 jnz .done call check_hd_wait_timeout cmp [hd_error], 0 jz .wait mov [irq15_func], hdd_irq_null mov dx, [IDEContrRegsBaseAddr] add dx, 8 mov al, 0 out dx, al .done: pop edx pop eax ret iglobal align 4 ; note that IDE descriptor table must be 4-byte aligned and do not cross 4K boundary IDE_descriptor_table: dd 0x284000 dw 0x2000 dw 0x8000 dma_cur_sector dd not 40h irq14_func dd hdd_irq_null irq15_func dd hdd_irq_null endg uglobal ; all uglobals are zeroed at boot dma_process dd 0 dma_slot_ptr dd 0 cache_chain_pos dd 0 cache_chain_ptr dd 0 cache_chain_size db 0 cache_chain_started db 0 dma_task_switched db 0 dma_hdd db 0 allow_dma_access db 0 endg align 4 hdd_irq14: pushfd cli pushad mov [irq14_func], hdd_irq_null mov dx, [IDEContrRegsBaseAddr] mov al, 0 out dx, al ; call update_counters ; mov ebx, [dma_process] ; cmp [CURRENT_TASK], ebx ; jz .noswitch ; mov [dma_task_switched], 1 ; mov edi, [dma_slot_ptr] ; mov eax, [CURRENT_TASK] ; mov [dma_process], eax ; mov eax, [TASK_BASE] ; mov [dma_slot_ptr], eax ; mov [CURRENT_TASK], ebx ; mov [TASK_BASE], edi ; mov byte [DONT_SWITCH], 1 ; call do_change_task .noswitch: popad popfd align 4 hdd_irq_null: ret align 4 hdd_irq15: pushfd cli pushad mov [irq15_func], hdd_irq_null mov dx, [IDEContrRegsBaseAddr] add dx, 8 mov al, 0 out dx, al ; call update_counters ; mov ebx, [dma_process] ; cmp [CURRENT_TASK], ebx ; jz .noswitch ; mov [dma_task_switched], 1 ; mov edi, [dma_slot_ptr] ; mov eax, [CURRENT_TASK] ; mov [dma_process], eax ; mov eax, [TASK_BASE] ; mov [dma_slot_ptr], eax ; mov [CURRENT_TASK], ebx ; mov [TASK_BASE], edi ; mov byte [DONT_SWITCH], 1 ; call do_change_task .noswitch: popad popfd ret align 4 hd_read_dma: push eax push edx mov edx, [dma_cur_sector] cmp eax, edx jb .notread add edx, 15 cmp [esp+4], edx ja .notread mov eax, [esp+4] sub eax, [dma_cur_sector] shl eax, 9 add eax, OS_BASE+0x284000 push ecx esi edi mov esi, eax shl edi, 9 ; add edi, HD_CACHE+0x10000 push eax call calculate_cache_2 add edi,eax pop eax mov ecx, 512/4 cld rep movsd pop edi esi ecx pop edx pop eax ret .notread: mov eax, IDE_descriptor_table mov dword [eax], 0x284000 mov word [eax+4], 0x2000 sub eax, OS_BASE mov dx, [IDEContrRegsBaseAddr] cmp [hdbase], 0x1F0 jz @f add edx, 8 @@: push edx add edx, 4 out dx, eax pop edx mov al, 0 out dx, al add edx, 2 mov al, 6 out dx, al call wait_for_hd_idle cmp [hd_error], 0 jnz hd_read_error call disable_ide_int xor eax, eax mov edx, [hdbase] inc edx out dx, al inc edx mov eax, 10h out dx, al inc edx mov eax, [esp+4] out dx, al shr eax, 8 inc edx out dx, al shr eax, 8 inc edx out dx, al shr eax, 8 inc edx and al, 0xF add al, byte [hdid] add al, 11100000b out dx, al inc edx mov al, 0xC8 out dx, al mov dx, [IDEContrRegsBaseAddr] cmp [hdbase], 0x1F0 jz @f add dx, 8 @@: mov al, 9 out dx, al mov eax, [CURRENT_TASK] mov [dma_process], eax mov eax, [TASK_BASE] mov [dma_slot_ptr], eax cmp [hdbase], 0x1F0 jnz .ide1 mov [irq14_func], hdd_irq14 jmp @f .ide1: mov [irq15_func], hdd_irq15 @@: call enable_ide_int cmp [hdbase], 0x1F0 jnz .wait_ide1 call wait_for_sector_dma_ide0 jmp @f .wait_ide1: call wait_for_sector_dma_ide1 @@: cmp [hd_error], 0 jnz hd_read_error pop edx pop eax mov [dma_cur_sector], eax jmp hd_read_dma align 4 write_cache_sector: mov [cache_chain_size],1 mov [cache_chain_pos],edi write_cache_chain: push esi mov eax, IDE_descriptor_table mov edx,eax pusha mov esi,[cache_chain_pos] shl esi, 9 call calculate_cache_2 add esi,eax mov edi,OS_BASE+0x284000 ;HD_CACHE mov dword [edx], 0x284000 ;DMA_HD_MEM movzx ecx, [cache_chain_size] shl ecx, 9 mov word [edx+4], cx shr ecx,2 cld rep movsd popa sub eax, OS_BASE mov dx, [IDEContrRegsBaseAddr] cmp [hdbase], 0x1F0 jz @f add edx, 8 @@: push edx add edx, 4 out dx, eax pop edx mov al, 0 out dx, al add edx, 2 mov al, 6 out dx, al call wait_for_hd_idle cmp [hd_error], 0 jnz hd_write_error_dma call disable_ide_int xor eax, eax mov edx, [hdbase] inc edx out dx, al inc edx mov al, [cache_chain_size] out dx, al inc edx mov esi, [cache_chain_ptr] mov eax, [esi] out dx, al shr eax, 8 inc edx out dx, al shr eax, 8 inc edx out dx, al shr eax, 8 inc edx and al, 0xF add al, byte [hdid] add al, 11100000b out dx, al inc edx mov al, 0xCA out dx, al mov dx, [IDEContrRegsBaseAddr] cmp [hdbase], 0x1F0 jz @f add dx, 8 @@: mov al, 1 out dx, al mov eax, [CURRENT_TASK] mov [dma_process], eax mov eax, [TASK_BASE] mov [dma_slot_ptr], eax cmp [hdbase], 0x1F0 jnz .ide1 mov [irq14_func], hdd_irq14 jmp @f .ide1: mov [irq15_func], hdd_irq15 @@: call enable_ide_int mov [dma_cur_sector], not 0x40 cmp [hdbase], 0x1F0 jnz .wait_ide1 call wait_for_sector_dma_ide0 jmp @f .wait_ide1: call wait_for_sector_dma_ide1 @@: cmp [hd_error], 0 jnz hd_write_error_dma pop esi ret uglobal IDEContrRegsBaseAddr dw ? endg ; \end{Mario79}