; Automated dhcp client ; v 1.3 ; ; with thanks to authors of DHCP client for menuetos: Mike Hibbet ; ; by HidnPlayr & Derpenguin TIMEOUT equ 60 ; in seconds BUFFER equ 1024 __DEBUG__ equ 1 __DEBUG_LEVEL__ equ 1; 1 = all, 2 = errors use32 org 0x0 db 'MENUET01' ; 8 byte id dd 0x01 ; header version dd START ; start of code dd IM_END ; size of image dd I_END ; memory for app dd I_END ; esp dd 0x0 , 0x0 ; I_Param , I_Icon ;include 'macros.inc' include 'eth.inc' include 'debug-fdo.inc' ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; CONFIGURATION FOR LINK-LOCAL ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; PROBE_WAIT equ 1 ; second (initial random delay) ; PROBE_MIN equ 1 ; second (minimum delay till repeated probe) ; PROBE_MAX equ 2 ; seconds (maximum delay till repeated probe) ; PROBE_NUM equ 3 ; (number of probe packets) ; ; ; ANNOUNCE_NUM equ 2 ; (number of announcement packets) ; ANNOUNCE_INTERVAL equ 2 ; seconds (time between announcement packets) ; ANNOUNCE_WAIT equ 2 ; seconds (delay before announcing) ; ; ; MAX_CONFLICTS equ 10 ; (max conflicts before rate limiting) ; ; ; RATE_LIMIT_INTERVAL equ 60 ; seconds (delay between successive attempts) ; ; ; DEFEND_INTERVAL equ 10 ; seconds (min. wait between defensive ARPs) ; ; ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; START: ; start of execution mov eax,40 ; Report events mov ebx,10000000b ; Only Stack int 0x40 mov eax,52 ; first, enable the stack (packet driver) mov ebx,2 mov ecx,0x00000383 int 0x40 DEBUGF 1,"DHCP: Stack Initialized.\n" eth.status eax ; Read the Stack status test eax,eax ; if eax is zero, no driver was found jnz @f DEBUGF 1,"DHCP: No Card detected\n" jmp close @@: DEBUGF 1,"DHCP: Detected card: %x\n",eax @@: eth.check_cable eax test al,al jnz @f DEBUGF 1,"DHCP: Ethernet Cable not connected\n" mov eax,5 mov ebx,500 ; loop until cable is connected (check every 5 sec) int 0x40 jmp @r @@: DEBUGF 1,"DHCP: Ethernet Cable status: %d\n",al eth.read_mac MAC DEBUGF 1,"DHCP: MAC address: %x-%x-%x-%x-%x-%x\n",[MAC]:2,[MAC+1]:2,[MAC+2]:2,[MAC+3]:2,[MAC+4]:2,[MAC+5]:2 ; jmp apipa ; comment this out if you want to skip DHCP and continue with link-local ;*************************************************************************** ; ; DHCP rubish starts here ; ;*************************************************************************** eth.check_port 68,eax ; Check if port 68 is available cmp eax,1 je @f DEBUGF 1,"DHCP: Port 68 is already in use.\n" jmp close @@: eth.open_udp 68,67,-1,[socketNum] ; open socket (local,remote,ip,socket) DEBUGF 1,"DHCP: Socket opened: %d\n",eax ; Setup the first msg we will send mov byte [dhcpMsgType], 0x01 ; DHCP discover mov dword [dhcpLease], esi ; esi is still -1 (-1 = forever) mov eax,26 mov ebx,9 int 0x40 imul eax,100 mov [currTime],eax ;*************************************************************************** ; Function ; buildRequest ; ; Description ; Creates a DHCP request packet. ; ;*************************************************************************** buildRequest: xor eax,eax ; Clear dhcpMsg to all zeros mov edi,dhcpMsg mov ecx,BUFFER cld rep stosb mov edx, dhcpMsg mov [edx], byte 0x01 ; Boot request mov [edx+1], byte 0x01 ; Ethernet mov [edx+2], byte 0x06 ; Ethernet h/w len mov [edx+4], dword 0x11223344 ; xid mov eax,[currTime] mov [edx+8], eax ; secs, our uptime mov [edx+10], byte 0x80 ; broadcast flag set mov eax, dword [MAC] ; first 4 bytes of MAC mov [edx+28],dword eax mov ax, word [MAC+4] ; last 2 bytes of MAC mov [edx+32],word ax mov [edx+236], dword 0x63538263 ; magic number mov [edx+240], word 0x0135 ; option DHCP msg type mov al, [dhcpMsgType] mov [edx+240+2], al mov [edx+240+3], word 0x0433 ; option Lease time = infinity mov eax, [dhcpLease] mov [edx+240+5], eax mov [edx+240+9], word 0x0432 ; option requested IP address mov eax, [dhcpClientIP] mov [edx+240+11], eax mov [edx+240+15], word 0x0437 ; option request list mov [edx+240+17], dword 0x0f060301 cmp [dhcpMsgType], byte 0x01 ; Check which msg we are sending jne br001 mov [edx+240+21], byte 0xff ; "Discover" options mov [dhcpMsgLen], dword 262 ; end of options marker jmp ctr000 br001: ; "Request" options mov [edx+240+21], word 0x0436 ; server IP mov eax, [dhcpServerIP] mov [edx+240+23], eax mov [edx+240+27], byte 0xff ; end of options marker mov [dhcpMsgLen], dword 268 ctr000: eth.write_udp [socketNum],[dhcpMsgLen],dhcpMsg ; write to socket ( send broadcast request ) mov eax, dhcpMsg ; Setup the DHCP buffer to receive response mov [dhcpMsgLen], eax ; Used as a pointer to the data mov eax,23 ; wait here for event (data from remote) mov ebx,TIMEOUT*10 int 0x40 eth.poll [socketNum] test eax,eax jnz ctr002 DEBUGF 2,"DHCP: Timeout!\n" eth.close_udp [socketNum] jmp apipa ; no server found, lets try zeroconf ctr002: ; we have data - this will be the response eth.read_packet [socketNum], dhcpMsg, BUFFER mov [dhcpMsgLen], eax eth.close_udp [socketNum] ; depending on which msg we sent, handle the response ; accordingly. ; If the response is to a dhcp discover, then: ; 1) If response is DHCP OFFER then ; 1.1) record server IP, lease time & IP address. ; 1.2) send a request packet ; If the response is to a dhcp request, then: ; 1) If the response is DHCP ACK then ; 1.1) extract the DNS & subnet fields. Set them in the stack cmp [dhcpMsgType], byte 0x01 ; did we send a discover? je discover cmp [dhcpMsgType], byte 0x03 ; did we send a request? je request jmp close ; really unknown, what we did discover: call parseResponse cmp [dhcpMsgType], byte 0x02 ; Was the response an offer? jne apipa ; NO - so we do zeroconf mov [dhcpMsgType], byte 0x03 ; DHCP request jmp buildRequest request: call parseResponse cmp [dhcpMsgType], byte 0x05 ; Was the response an ACK? It should be jne apipa ; NO - so we do zeroconf close: DEBUGF 1,"DHCP: Exiting\n" mov eax,-1 ; at last, exit int 0x40 ;*************************************************************************** ; Function ; parseResponse ; ; Description ; extracts the fields ( client IP address and options ) from ; a DHCP response ; The values go into ; dhcpMsgType,dhcpLease,dhcpClientIP,dhcpServerIP, ; dhcpDNSIP, dhcpSubnet ; The message is stored in dhcpMsg ; ;*************************************************************************** parseResponse: DEBUGF 1,"DHCP: Data received, parsing response\n" mov edx, dhcpMsg pusha eth.set_IP [edx+16] mov eax,[edx] mov [dhcpClientIP],eax DEBUGF 1,"DHCP: Client: %u.%u.%u.%u\n",[edx+16]:1,[edx+17]:1,[edx+18]:1,[edx+19]:1 popa add edx, 240 ; Point to first option pr001: mov al, [edx] cmp al, 0xff ; End of options? je pr_exit cmp al, 53 ; Msg type is a single byte option jne pr002 mov al, [edx+2] mov [dhcpMsgType], al add edx, 3 jmp pr001 ; Get next option pr002: inc edx movzx ecx, byte [edx] inc edx ; point to data cmp al, 54 ; server id jne pr0021 mov eax, [edx] ; All options are 4 bytes, so get it mov [dhcpServerIP], eax DEBUGF 1,"DHCP: Server: %u.%u.%u.%u\n",[edx]:1,[edx+1]:1,[edx+2]:1,[edx+3]:1 jmp pr003 pr0021: cmp al, 51 ; lease jne pr0022 pusha DEBUGF 1,"DHCP: lease: " mov eax,[edx] bswap eax mov [dhcpLease],eax cmp dword[edx],-1 ; i really don't know, how to test it jne no_lease_forever DEBUGF 1,"forever\n" jmp @f no_lease_forever: DEBUGF 1,"%d\n",eax @@: popa jmp pr003 pr0022: cmp al, 1 ; subnet mask jne pr0023 pusha eth.set_SUBNET [edx] DEBUGF 1,"DHCP: Subnet: %u.%u.%u.%u\n",[edx]:1,[edx+1]:1,[edx+2]:1,[edx+3]:1 popa jmp pr003 pr0023: cmp al, 3 ; gateway ip jne pr0024 pusha eth.set_GATEWAY [edx] DEBUGF 1,"DHCP: Gateway: %u.%u.%u.%u\n",[edx]:1,[edx+1]:1,[edx+2]:1,[edx+3]:1 popa pr0024: cmp al, 6 ; dns ip jne pr003 pusha eth.set_DNS [edx] DEBUGF 1,"DHCP: DNS: %u.%u.%u.%u\n",[edx]:1,[edx+1]:1,[edx+2]:1,[edx+3]:1 popa pr003: add edx, ecx jmp pr001 pr_exit: ; DEBUGF 1,"DHCP: Sending ARP probe\n" ; eth.ARP_ANNOUNCE [dhcpClientIP] ; send an ARP announc packet jmp close apipa: call random mov ecx,0xfea9 ; IP 169.254.0.0 link local net, see RFC3927 mov cx,ax eth.set_IP ecx ; mask is 255.255.0.0 DEBUGF 1,"ZeroConf: Link Local IP assinged: 169.254.%u.%u\n",[generator+2]:1,[generator+3]:1 eth.set_SUBNET 0xffff eth.set_GATEWAY 0x0 eth.set_DNS 0x0 mov eax,5 mov ebx,PROBE_WAIT*100 int 0x40 xor esi,esi probe_loop: call random ; create a pseudo random number in eax (seeded by MAC) cmp al,PROBE_MIN*100 ; check if al is bigger then PROBE_MIN jge @f ; all ok add al,(PROBE_MAX-PROBE_MIN)*100 ; al is too small @@: cmp al,PROBE_MAX*100 jle @f sub al,(PROBE_MAX-PROBE_MIN)*100 @@: movzx ebx,al DEBUGF 1,"ZeroConf: Waiting %u0ms\n",ebx mov eax,5 int 0x40 DEBUGF 1,"ZeroConf: Sending Probe\n" ; eth.ARP_PROBE MAC2 inc esi cmp esi,PROBE_NUM jl probe_loop ; now we wait further ANNOUNCE_WAIT seconds and send ANNOUNCE_NUM ARP announces. If any other host has assingnd ; IP within this time, we should create another adress, that have to be done later DEBUGF 1,"ZeroConf: Waiting %us\n",ANNOUNCE_WAIT mov eax,5 mov ebx,ANNOUNCE_WAIT*100 int 0x40 xor esi,esi announce_loop: DEBUGF 1,"ZeroConf: Sending Announce\n" ; eth.ARP_ANNOUNCE MAC2 inc esi cmp esi,ANNOUNCE_NUM je @f DEBUGF 1,"ZeroConf: Waiting %us\n",ANNOUNCE_INTERVAL mov eax,5 mov ebx,ANNOUNCE_INTERVAL*100 int 0x40 jmp announce_loop @@: jmp close ; we should, instead of closing, detect ARP conflicts and detect if cable keeps connected ;) random: mov eax,[generator] add eax,-43ab45b5h ror eax,1 bswap eax xor eax,dword[MAC] ror eax,1 xor eax,dword[MAC+2] mov [generator],eax ret ; DATA AREA include_debug_strings ; ALWAYS present in data section IM_END: dhcpClientIP dd 0 dhcpMsgType db 0 dhcpLease dd 0 dhcpServerIP dd 0 dhcpMsgLen dd 0 socketNum dd 0 MAC rb 6 currTime dd 0 renewTime dd 0 generator dd 0 dhcpMsg rb BUFFER I_END: