kolibrios/drivers/audio/a5536/pci.h
turbocat 87b4931235 Geode (a5536) driver added to autobuild.
git-svn-id: svn://kolibrios.org@9503 a494cfbc-eb01-0410-851d-a64ba20cac60
2021-12-27 20:10:59 +00:00

194 lines
7.9 KiB
C

#ifndef _GEODE_PCI_
#define _GEODE_PCI_
typedef int Bool;
typedef unsigned char u8_t;
typedef unsigned short u16_t;
typedef unsigned int u32_t;
#define TRUE 1
#define FALSE 0
#pragma pack(push, 1)
typedef struct
{
u16_t device;
u16_t ChipSet;
}PciChipset_t;
#pragma pack(pop)
#define VENDOR_ATI 0x1002
#define PCI_CLASS_DISPLAY_VGA 0x0300
/*
* Under PCI, each device has 256 bytes of configuration address space,
* of which the first 64 bytes are standardized as follows:
*/
#define PCI_VENDOR_ID 0x00 /* 16 bits */
#define PCI_DEVICE_ID 0x02 /* 16 bits */
#define PCI_COMMAND 0x04 /* 16 bits */
#define PCI_COMMAND_IO 0x01 /* Enable response in I/O space */
#define PCI_COMMAND_MEMORY 0x02 /* Enable response in Memory space */
#define PCI_COMMAND_MASTER 0x04 /* Enable bus mastering */
#define PCI_COMMAND_SPECIAL 0x08 /* Enable response to special cycles */
#define PCI_COMMAND_INVALIDATE 0x10 /* Use memory write and invalidate */
#define PCI_COMMAND_VGA_PALETTE 0x20 /* Enable palette snooping */
#define PCI_COMMAND_PARITY 0x40 /* Enable parity checking */
#define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */
#define PCI_COMMAND_SERR 0x100 /* Enable SERR */
#define PCI_COMMAND_FAST_BACK 0x200 /* Enable back-to-back writes */
#define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */
#define PCI_STATUS 0x06 /* 16 bits */
#define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */
#define PCI_STATUS_66MHZ 0x20 /* Support 66 Mhz PCI 2.1 bus */
#define PCI_STATUS_UDF 0x40 /* Support User Definable Features [obsolete] */
#define PCI_STATUS_FAST_BACK 0x80 /* Accept fast-back to back */
#define PCI_STATUS_PARITY 0x100 /* Detected parity error */
#define PCI_STATUS_DEVSEL_MASK 0x600 /* DEVSEL timing */
#define PCI_STATUS_DEVSEL_FAST 0x000
#define PCI_STATUS_DEVSEL_MEDIUM 0x200
#define PCI_STATUS_DEVSEL_SLOW 0x400
#define PCI_STATUS_SIG_TARGET_ABORT 0x800 /* Set on target abort */
#define PCI_STATUS_REC_TARGET_ABORT 0x1000 /* Master ack of " */
#define PCI_STATUS_REC_MASTER_ABORT 0x2000 /* Set on master abort */
#define PCI_STATUS_SIG_SYSTEM_ERROR 0x4000 /* Set when we drive SERR */
#define PCI_STATUS_DETECTED_PARITY 0x8000 /* Set on parity error */
#define PCI_CLASS_REVISION 0x08 /* High 24 bits are class, low 8 revision */
#define PCI_REVISION_ID 0x08 /* Revision ID */
#define PCI_CLASS_PROG 0x09 /* Reg. Level Programming Interface */
#define PCI_CLASS_DEVICE 0x0a /* Device class */
#define PCI_CACHE_LINE_SIZE 0x0c /* 8 bits */
#define PCI_LATENCY_TIMER 0x0d /* 8 bits */
#define PCI_HEADER_TYPE 0x0e /* 8 bits */
#define PCI_HEADER_TYPE_NORMAL 0
#define PCI_HEADER_TYPE_BRIDGE 1
#define PCI_HEADER_TYPE_CARDBUS 2
#define PCI_BIST 0x0f /* 8 bits */
#define PCI_BIST_CODE_MASK 0x0f /* Return result */
#define PCI_BIST_START 0x40 /* 1 to start BIST, 2 secs or less */
#define PCI_BIST_CAPABLE 0x80 /* 1 if BIST capable */
#define PCI_CAPABILITY_LIST 0x34 /* Offset of first capability list entry */
#define PCI_CB_CAPABILITY_LIST 0x14
/* Capability lists */
#define PCI_CAP_LIST_ID 0 /* Capability ID */
#define PCI_CAP_ID_PM 0x01 /* Power Management */
#define PCI_CAP_ID_AGP 0x02 /* Accelerated Graphics Port */
#define PCI_CAP_ID_VPD 0x03 /* Vital Product Data */
#define PCI_CAP_ID_SLOTID 0x04 /* Slot Identification */
#define PCI_CAP_ID_MSI 0x05 /* Message Signalled Interrupts */
#define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */
#define PCI_CAP_ID_PCIX 0x07 /* PCI-X */
#define PCI_CAP_ID_HT 0x08 /* HyperTransport */
#define PCI_CAP_ID_VNDR 0x09 /* Vendor specific capability */
#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */
#define PCI_CAP_ID_EXP 0x10 /* PCI Express */
#define PCI_CAP_ID_MSIX 0x11 /* MSI-X */
#define PCI_CAP_LIST_NEXT 1 /* Next capability in the list */
#define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */
#define PCI_CAP_SIZEOF 4
/* AGP registers */
#define PCI_AGP_VERSION 2 /* BCD version number */
#define PCI_AGP_RFU 3 /* Rest of capability flags */
#define PCI_AGP_STATUS 4 /* Status register */
#define PCI_AGP_STATUS_RQ_MASK 0xff000000 /* Maximum number of requests - 1 */
#define PCI_AGP_STATUS_SBA 0x0200 /* Sideband addressing supported */
#define PCI_AGP_STATUS_64BIT 0x0020 /* 64-bit addressing supported */
#define PCI_AGP_STATUS_FW 0x0010 /* FW transfers supported */
#define PCI_AGP_STATUS_RATE4 0x0004 /* 4x transfer rate supported */
#define PCI_AGP_STATUS_RATE2 0x0002 /* 2x transfer rate supported */
#define PCI_AGP_STATUS_RATE1 0x0001 /* 1x transfer rate supported */
#define PCI_AGP_COMMAND 8 /* Control register */
#define PCI_AGP_COMMAND_RQ_MASK 0xff000000 /* Master: Maximum number of requests */
#define PCI_AGP_COMMAND_SBA 0x0200 /* Sideband addressing enabled */
#define PCI_AGP_COMMAND_AGP 0x0100 /* Allow processing of AGP transactions */
#define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow processing of 64-bit addresses */
#define PCI_AGP_COMMAND_FW 0x0010 /* Force FW transfers */
#define PCI_AGP_COMMAND_RATE4 0x0004 /* Use 4x rate */
#define PCI_AGP_COMMAND_RATE2 0x0002 /* Use 2x rate */
#define PCI_AGP_COMMAND_RATE1 0x0001 /* Use 1x rate */
#define PCI_AGP_SIZEOF 12
#define PCI_MAP_REG_START 0x10
#define PCI_MAP_REG_END 0x28
#define PCI_MAP_ROM_REG 0x30
#define PCI_MAP_MEMORY 0x00000000
#define PCI_MAP_IO 0x00000001
#define PCI_MAP_MEMORY_TYPE 0x00000007
#define PCI_MAP_IO_TYPE 0x00000003
#define PCI_MAP_MEMORY_TYPE_32BIT 0x00000000
#define PCI_MAP_MEMORY_TYPE_32BIT_1M 0x00000002
#define PCI_MAP_MEMORY_TYPE_64BIT 0x00000004
#define PCI_MAP_MEMORY_TYPE_MASK 0x00000006
#define PCI_MAP_MEMORY_CACHABLE 0x00000008
#define PCI_MAP_MEMORY_ATTR_MASK 0x0000000e
#define PCI_MAP_MEMORY_ADDRESS_MASK 0xfffffff0
#define PCI_MAP_IO_ATTR_MASK 0x00000003
#define PCI_MAP_IS_IO(b) ((b) & PCI_MAP_IO)
#define PCI_MAP_IS_MEM(b) (!PCI_MAP_IS_IO(b))
#define PCI_MAP_IS64BITMEM(b) \
(((b) & PCI_MAP_MEMORY_TYPE_MASK) == PCI_MAP_MEMORY_TYPE_64BIT)
#define PCIGETMEMORY(b) ((b) & PCI_MAP_MEMORY_ADDRESS_MASK)
#define PCIGETMEMORY64HIGH(b) (*((CARD32*)&b + 1))
#define PCIGETMEMORY64(b) \
(PCIGETMEMORY(b) | ((CARD64)PCIGETMEMORY64HIGH(b) << 32))
#define PCI_MAP_IO_ADDRESS_MASK 0xfffffffc
#define PCIGETIO(b) ((b) & PCI_MAP_IO_ADDRESS_MASK)
#define PCI_MAP_ROM_DECODE_ENABLE 0x00000001
#define PCI_MAP_ROM_ADDRESS_MASK 0xfffff800
#define PCIGETROM(b) ((b) & PCI_MAP_ROM_ADDRESS_MASK)
#ifndef PCI_DOM_MASK
# define PCI_DOM_MASK 0x0ffu
#endif
#define PCI_DOMBUS_MASK (((PCI_DOM_MASK) << 8) | 0x0ffu)
#define PCI_MAKE_TAG(b,d,f) ((((b) & (PCI_DOMBUS_MASK)) << 16) | \
(((d) & 0x00001fu) << 11) | \
(((f) & 0x000007u) << 8))
#define PCI_BUS_FROM_TAG(tag) (((tag) >> 16) & (PCI_DOMBUS_MASK))
#define PCI_DEV_FROM_TAG(tag) (((tag) & 0x0000f800u) >> 11)
#define PCI_FUNC_FROM_TAG(tag) (((tag) & 0x00000700u) >> 8)
#define PCI_DFN_FROM_TAG(tag) (((tag) & 0x0000ff00u) >> 8)
typedef unsigned int PCITAG;
extern inline PCITAG
pciTag(int busnum, int devnum, int funcnum)
{
return(PCI_MAKE_TAG(busnum,devnum,funcnum));
}
const PciChipset_t *PciDevMatch(u16_t dev,const PciChipset_t *list);
u32_t pciGetBaseSize(int bus, int devfn, int index, Bool destructive, Bool *min);
#define PCI_ANY_ID (~0)
#define for_each_pci_dev(d) while ((d = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, d))!=-1)
#endif // _GEODE_PCI_