kolibrios/kernel/trunk/network/socket.inc
Mihail Semenyako (mike.dld) 54e9661045 Network stack: dynamic sockets list, other small fixes
git-svn-id: svn://kolibrios.org@907 a494cfbc-eb01-0410-851d-a64ba20cac60
2008-11-05 00:42:22 +00:00

1077 lines
28 KiB
PHP

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2004-2007. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;; SOCKET.INC ;;
;; ;;
;; Sockets constants, structures and functions ;;
;; ;;
;; Last revision: 11.11.2006 ;;
;; ;;
;; This file contains the following: ;;
;; is_localport_unused ;;
;; get_free_socket ;;
;; socket_open ;;
;; socket_open_tcp ;;
;; socket_close ;;
;; socket_close_tcp ;;
;; socket_poll ;;
;; socket_status ;;
;; socket_read ;;
;; socket_write ;;
;; socket_write_tcp ;;
;; ;;
;; ;;
;; Changes history: ;;
;; 22.09.2003 - [Mike Hibbett] : mikeh@oceanfree.net ;;
;; 11.11.2006 - [Johnny_B] and [smb] ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
$Revision$
;
; Socket Descriptor + Buffer
;
; 0 1 2 3
; 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
;
; +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
; 0| Status ( of this buffer ) |
; +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
; 4| Application Process ID |
; +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
; 8| Local IP Address |
; +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
; 12| Local IP Port | Unused ( set to 0 ) |
; +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
; 16| Remote IP Address |
; +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
; 20| Remote IP Port | Unused ( set to 0 ) |
; +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
; 24| Rx Data Count INTEL format|
; +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
; 28| TCB STATE INTEL format|
; +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
; 32| TCB Timer (seconds) INTEL format|
; +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
; 36| ISS (Inital Sequence # used by this connection ) INET format|
; +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
; 40| IRS ( Inital Receive Sequence # ) INET format|
; +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
; 44| SND.UNA Seq # of unack'ed sent packets INET format|
; +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
; 48| SND.NXT Next send seq # to use INET format|
; +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
; 52| SND.WND Send window INET format|
; +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
; 56| RCV.NXT Next expected receive sequence # INET format|
; +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
; 60| RCV.WND Receive window INET format|
; +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
; 64| SEG.LEN Segment length INTEL format|
; +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
; 68| SEG.WND Segment window INTEL format|
; +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
; 72| Retransmit queue # NOW WINDOW SIZE TIMER INTEL format|
; +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
; 76| RX Data Buffer |
; +-+-+-.......... -+
; so, define struct
struc SOCKET
{
.Status dd ? ;+00 - Status ( of this buffer )
.PID dd ? ;+04 - Application Process ID
.LocalIP dd ? ;+08 - Local IP Address
.LocalPort dw ? ;+12 - Local Port
.RemoteIP dd ? ;+16 - Remote IP Address
.RemotePort dw ? ;+20 - Remote Port
.OrigRemoteIP dd ?
.OrigRemotePort dw ?
.rxDataCount dd ? ;+24 - Rx Data Count
.TCBState dd ? ;+28 - TCB STATE
.TCBTimer dd ? ;+32 - TCB Timer (seconds)
.ISS dd ? ;+36 - Initial Send Sequence
.IRS dd ? ;+40 - Initial Receive Sequence
.SND_UNA dd ? ;+44 - Sequence number of unack'ed sent packets
.SND_NXT dd ? ;+48 - Next send sequence number to use
.SND_WND dd ? ;+52 - Send window
.RCV_NXT dd ? ;+56 - Next receive sequence number to use
.RCV_WND dd ? ;+60 - Receive window
.SEG_LEN dd ? ;+64 - Segment length
.SEG_WND dd ? ;+68 - Segment window
.wndsizeTimer dd ? ;+72 - Retransmit queue # NOW WINDOW SIZE TIMER
.PrevPtr dd ?
.NextPtr dd ?
.rxData dd ? ;+76 - receive data buffer here
}
virtual at 0
SOCKET SOCKET
end virtual
; simple macro calcing real memory address of SOCKET struct by socket's
;macro Index2RealAddr reg
;{
; shl reg, 12
; add reg, sockets
;}
;Constants
; current socket statuses
SOCK_EMPTY = 0 ; socket not in use
SOCK_OPEN = 1 ; open issued, but no data sent
; TCP opening modes
SOCKET_PASSIVE equ 0
SOCKET_ACTIVE equ 1
proc net_socket_alloc stdcall uses ebx ecx edx edi
stdcall kernel_alloc, SOCKETBUFFSIZE
DEBUGF 1, "K : net_socket_alloc (0x%x)\n", eax
or eax, eax
jz .exit
push eax
mov edi, eax
mov ecx, SOCKETBUFFSIZE / 4
cld
xor eax, eax
rep stosd
pop eax
mov ebx, net_sockets
push [ebx + SOCKET.NextPtr]
mov [ebx + SOCKET.NextPtr], eax
mov [eax + SOCKET.PrevPtr], ebx
pop ebx
mov [eax + SOCKET.NextPtr], ebx
or ebx, ebx
jz @f
mov [ebx + SOCKET.PrevPtr], eax
@@: mov ebx, [TASK_BASE]
mov ebx, [ebx + TASKDATA.pid]
mov [eax + SOCKET.PID], ebx
.exit:
ret
endp
proc net_socket_free stdcall uses ebx ecx edx, sock:DWORD
mov eax, [sock]
DEBUGF 1, "K : net_socket_free (0x%x)\n", eax
or eax, eax
jz .error
mov ebx, net_sockets
mov ecx, [TASK_BASE]
mov ecx, [ecx + TASKDATA.pid]
.next_socket:
mov ebx, [ebx + SOCKET.NextPtr]
or ebx, ebx
jz .error
cmp ebx, eax
jne .next_socket
;cmp [ebx + SOCKET.PID], ecx
;jne .next_socket
mov ebx, [eax + SOCKET.NextPtr]
mov eax, [eax + SOCKET.PrevPtr]
mov [eax + SOCKET.NextPtr], ebx
or ebx, ebx
jz @f
mov [ebx + SOCKET.PrevPtr], eax
@@: stdcall kernel_free, [sock]
ret
.error:
DEBUGF 1, "K : failed\n"
ret
endp
proc net_socket_num_to_addr stdcall uses ebx ecx, x:DWORD
; FIXME: do real transform
mov eax, [x]
mov ebx, net_sockets
mov ecx, [TASK_BASE]
mov ecx, [ecx + TASKDATA.pid]
.next_socket:
mov ebx, [ebx + SOCKET.NextPtr]
or ebx, ebx
jz .error
cmp ebx, eax
jne .next_socket
;cmp [ebx + SOCKET.PID], ecx
;jne .next_socket
ret
.error:
xor eax, eax
ret
endp
proc net_socket_addr_to_num stdcall uses ebx ecx, x:DWORD
; FIXME: do real transform
mov eax, [x]
mov ebx, net_sockets
mov ecx, [TASK_BASE]
mov ecx, [ecx + TASKDATA.pid]
.next_socket:
mov ebx, [ebx + SOCKET.NextPtr]
or ebx, ebx
jz .error
cmp ebx, eax
jne .next_socket
;cmp [ebx + SOCKET.PID], ecx
;jne .next_socket
ret
.error:
xor eax, eax
ret
endp
;***************************************************************************
; Function
; is_localport_unused
;
; Description
; scans through all the active sockets , looking to see if the
; port number specified in bx is in use as a localport number.
; This is useful when you want a to generate a unique local port
; number.
; On return, eax = 1 for free, 0 for in use
;
;***************************************************************************
proc is_localport_unused stdcall
xchg bl, bh
xor eax, eax ; Assume the return value is 'free'
inc al
mov edx, net_sockets
.next_socket:
mov edx, [edx + SOCKET.NextPtr]
or edx, edx
jz .exit
cmp [edx + SOCKET.LocalPort], bx
jne .next_socket ; Return back if the port is not occupied
dec al ; return 'in use'
.exit:
ret
endp
;***************************************************************************
; Function
; socket_open
;
; Description
; find a free socket
; local port in ebx
; remote port in ecx
; remote ip in edx
; return socket # in eax, -1 if none available
;
;***************************************************************************
proc socket_open stdcall
call net_socket_alloc
or eax, eax
jz .error
DEBUGF 1, "K : socket_open (0x%x)\n", eax
push eax
mov [eax + SOCKET.Status], SOCK_OPEN
xchg bh, bl
mov [eax + SOCKET.LocalPort], bx
xchg ch, cl
mov [eax + SOCKET.RemotePort], cx
mov ebx, [stack_ip]
mov [eax + SOCKET.LocalIP], ebx
mov [eax + SOCKET.RemoteIP], edx
;pop eax ; Get the socket number back, so we can return it
stdcall net_socket_addr_to_num
ret
.error:
DEBUGF 1, "K : socket_open (fail)\n"
or eax, -1
ret
endp
;***************************************************************************
; Function
; socket_open_tcp
;
; Description
; Opens a TCP socket in PASSIVE or ACTIVE mode
; find a free socket
; local port in ebx ( intel format )
; remote port in ecx ( intel format )
; remote ip in edx ( in Internet byte order )
; Socket open mode in esi ( SOCKET_PASSIVE or SOCKET_ACTIVE )
; return socket # in eax, -1 if none available
;
;***************************************************************************
proc socket_open_tcp stdcall
local sockAddr dd ?
cmp esi, SOCKET_PASSIVE
jne .skip_port_check
push ebx
mov eax, ebx
xchg al, ah
mov ebx, net_sockets
.next_socket:
mov ebx, [ebx + SOCKET.NextPtr]
or ebx, ebx
jz .last_socket
cmp [ebx + SOCKET.TCBState], TCB_LISTEN
jne .next_socket
cmp [ebx + SOCKET.LocalPort], ax
jne .next_socket
xchg al, ah
DEBUGF 1, "K : error: port %u is listened by 0x%x\n", ax, ebx
pop ebx
jmp .error
.last_socket:
pop ebx
.skip_port_check:
call net_socket_alloc
or eax, eax
jz .error
DEBUGF 1, "K : socket_open_tcp (0x%x)\n", eax
mov [sockAddr], eax
; TODO - check this works!
;xxx: already 0 (intialized by net_socket_alloc)
;mov [eax + SOCKET.wndsizeTimer], 0 ; Reset the window timer.
xchg bh, bl
mov [eax + SOCKET.LocalPort], bx
xchg ch, cl
mov [eax + SOCKET.RemotePort], cx
mov [eax + SOCKET.OrigRemotePort], cx
mov ebx, [stack_ip]
mov [eax + SOCKET.LocalIP], ebx
mov [eax + SOCKET.RemoteIP], edx
mov [eax + SOCKET.OrigRemoteIP], edx
mov ebx, TCB_LISTEN
cmp esi, SOCKET_PASSIVE
je @f
mov ebx, TCB_SYN_SENT
@@: mov [eax + SOCKET.TCBState], ebx ; Indicate the state of the TCB
cmp ebx, TCB_LISTEN
je .exit
; Now, if we are in active mode, then we have to send a SYN to the specified remote port
mov eax, EMPTY_QUEUE
call dequeue
cmp ax, NO_BUFFER
je .exit
push eax
mov bl, TH_SYN
xor ecx, ecx
stdcall build_tcp_packet, [sockAddr]
mov eax, NET1OUT_QUEUE
mov edx, [stack_ip]
mov ecx, [sockAddr]
cmp edx, [ecx + SOCKET.RemoteIP]
jne .not_local
mov eax, IPIN_QUEUE
.not_local:
; Send it.
pop ebx
call queue
mov esi, [sockAddr]
; increment SND.NXT in socket
add esi, SOCKET.SND_NXT
call inc_inet_esi
.exit:
mov ebx, [sockAddr]
mov [ebx + SOCKET.Status], SOCK_OPEN
;pop eax ; Get the socket number back, so we can return it
stdcall net_socket_addr_to_num, ebx
ret
.error:
DEBUGF 1, "K : socket_open_tcp (fail)\n"
or eax, -1
ret
endp
;***************************************************************************
; Function
; socket_close
;
; Description
; socket # in ebx
; returns 0 for ok, -1 for socket not open (fail)
;
;***************************************************************************
proc socket_close stdcall
DEBUGF 1, "K : socket_close (0x%x)\n", ebx
stdcall net_socket_num_to_addr, ebx
or eax, eax
jz .error
cmp [eax + SOCKET.Status], dword SOCK_EMPTY
jz .error
; Clear the socket varaibles
stdcall net_socket_free, eax
; mov edi, eax
; xor eax, eax
; mov ecx, SOCKETHEADERSIZE
; cld
; rep stosb
xor eax, eax
ret
.error:
DEBUGF 1, "K : socket_close (fail)\n"
or eax, -1
ret
endp
;***************************************************************************
; Function
; socket_close_tcp
;
; Description
; socket # in ebx
; returns 0 for ok, -1 for socket not open (fail)
;
;***************************************************************************
proc socket_close_tcp stdcall
local sockAddr dd ?
DEBUGF 1, "K : socket_close_tcp (0x%x)\n", ebx
; first, remove any resend entries
pusha
mov esi, resendQ
mov ecx, 0
.next_resendq:
cmp ecx, NUMRESENDENTRIES
je .last_resendq ; None left
;cmp [esi], bl ; XTODO: bl -> ebx
cmp [esi + 4], ebx
je @f ; found one
inc ecx
add esi, 8
jmp .next_resendq
;@@: mov byte[esi], 0xff ; XTODO: 0xff -> 0
@@: mov dword[esi + 4], 0
inc ecx
add esi, 8
jmp .next_resendq
.last_resendq:
popa
stdcall net_socket_num_to_addr, ebx
or eax, eax
jz .error
mov ebx, eax
mov [sockAddr], eax
cmp [ebx + SOCKET.Status], SOCK_EMPTY
je .error
cmp [ebx + SOCKET.TCBState], TCB_LISTEN ;xxx
je .destroy_tcb ;xxx
cmp [ebx + SOCKET.TCBState], TCB_SYN_SENT ;xxx
je .destroy_tcb ;xxx
; Now construct the response, and queue for sending by IP
mov eax, EMPTY_QUEUE
call dequeue
cmp ax, NO_BUFFER
je .error
push eax
;xxx mov bl, TH_FIN + TH_ACK
mov bl, TH_FIN ;xxx
xor ecx, ecx
xor esi, esi
stdcall build_tcp_packet, [sockAddr]
mov ebx, [sockAddr]
; increament SND.NXT in socket
lea esi, [ebx + SOCKET.SND_NXT]
call inc_inet_esi
; Get the socket state
mov eax, [ebx + SOCKET.TCBState]
;xxx cmp eax, TCB_LISTEN
;xxx je .destroy_tcb
;xxx cmp eax, TCB_SYN_SENT
;xxx je .destroy_tcb
cmp eax, TCB_SYN_RECEIVED
je .fin_wait_1
cmp eax, TCB_ESTABLISHED
je .fin_wait_1
; assume CLOSE WAIT
; Send a fin, then enter last-ack state
; TODO: check if it's really a TCB_CLOSE_WAIT
mov [ebx + SOCKET.TCBState], TCB_LAST_ACK
jmp .send
.fin_wait_1:
; Send a fin, then enter finwait2 state
mov [ebx + SOCKET.TCBState], TCB_FIN_WAIT_1
.send:
mov eax, NET1OUT_QUEUE
mov edx, [stack_ip]
mov ecx, [sockAddr]
cmp edx, [ecx + SOCKET.RemoteIP]
jne .not_local
mov eax, IPIN_QUEUE
.not_local:
; Send it.
pop ebx
call queue
jmp .exit
.destroy_tcb:
;xxx pop eax
; Clear the socket variables
;xxx stdcall net_socket_free, [sockAddr]
stdcall net_socket_free, ebx
.exit:
xor eax, eax
ret
.error:
DEBUGF 1, "K : socket_close_tcp (fail)\n"
or eax, -1
ret
endp
;***************************************************************************
; Function
; socket_poll
;
; Description
; socket # in ebx
; returns count in eax.
;
;***************************************************************************
proc socket_poll stdcall
; DEBUGF 1, "socket_poll(0x%x)\n", ebx
stdcall net_socket_num_to_addr, ebx
or eax, eax
jz .error
mov eax, [eax + SOCKET.rxDataCount]
ret
.error:
;or eax, -1
xor eax, eax
ret
endp
;***************************************************************************
; Function
; socket_status
;
; Description
; socket # in ebx
; returns TCB state in eax.
;
;***************************************************************************
proc socket_status stdcall
;; DEBUGF 1, "socket_status(0x%x)\n", ebx
stdcall net_socket_num_to_addr, ebx
or eax, eax
jz .error
mov eax, [eax + SOCKET.TCBState]
ret
.error:
;or eax, -1
xor eax, eax
ret
endp
; Index2RealAddr ebx
; mov eax, [ebx + SOCKET.TCBState]
;
; ret
;***************************************************************************
; Function
; socket_read
;
; Description
; socket # in ebx
; returns # of bytes remaining in eax, data in bl
;
;***************************************************************************
proc socket_read stdcall
; DEBUGF 1, "socket_read(0x%x)\n", ebx
stdcall net_socket_num_to_addr, ebx
or eax, eax
jz .error
mov ebx, eax
mov eax, [ebx + SOCKET.rxDataCount] ; get count of bytes
test eax, eax
jz .error
dec eax
mov esi, ebx ; esi is address of socket
mov [ebx + SOCKET.rxDataCount], eax ; store new count
;movzx ebx, byte[ebx + SOCKET.rxData] ; get the byte
movzx ebx, byte[ebx + SOCKETHEADERSIZE] ; get the byte
add esi, SOCKETHEADERSIZE
mov edi, esi
inc esi
mov ecx, (SOCKETBUFFSIZE - SOCKETHEADERSIZE) / 4
lea edi, [ebx + SOCKETHEADERSIZE]
lea esi, [edi + 1]
cld
rep movsd
ret
.error:
;or eax, -1
xor eax, eax
xor ebx, ebx
ret
endp
;***************************************************************************
; Function
; socket_read_packet
;
; Description
; socket # in ebx
; datapointer # in ecx
; buffer size in edx
; returns # of bytes copied in eax
;
;***************************************************************************
proc socket_read_packet stdcall
; DEBUGF 1, "socket_read_packet(0x%x)\n", ebx
stdcall net_socket_num_to_addr, ebx ; get real socket address
or eax, eax
jz .error
mov ebx, eax
mov eax, [ebx + SOCKET.rxDataCount] ; get count of bytes
test eax, eax ; if count of bytes is zero..
jz .exit ; exit function (eax will be zero)
test edx, edx ; if buffer size is zero, copy all data
jz .copy_all_bytes
cmp edx, eax ; if buffer size is larger then the bytes of data, copy all data
jge .copy_all_bytes
sub eax, edx ; store new count (data bytes in buffer - bytes we're about to copy)
mov [ebx + SOCKET.rxDataCount], eax ;
push eax
mov eax, edx ; number of bytes we want to copy must be in eax
call .start_copy ; copy to the application
mov esi, ebx ; now we're going to copy the remaining bytes to the beginning
add esi, SOCKETHEADERSIZE ; we dont need to copy the header
mov edi, esi ; edi is where we're going to copy to
add esi, edx ; esi is from where we copy
pop ecx ; count of bytes we have left
push ecx ; push it again so we can re-use it later
shr ecx, 2 ; divide eax by 4
cld
rep movsd ; copy all full dwords
pop ecx
and ecx, 3
rep movsb ; copy remaining bytes
.exit:
ret ; at last, exit
.error:
;or eax, -1
xor eax, eax
ret
.copy_all_bytes:
xor esi, esi
mov [ebx + SOCKET.rxDataCount], esi ; store new count (zero)
call .start_copy
ret
.start_copy:
mov edi, ecx
mov esi, ebx
add esi, SOCKETHEADERSIZE ; we dont need to copy the header
mov ecx, eax ; eax is count of bytes
push ecx
shr ecx, 2 ; divide eax by 4
cld ; copy all full dwords
rep movsd
pop ecx
and ecx, 3
rep movsb ; copy the rest bytes
retn ; exit, or go back to shift remaining bytes if any
endp
;***************************************************************************
; Function
; socket_write
;
; Description
; socket in ebx
; # of bytes to write in ecx
; pointer to data in edx
; returns 0 in eax ok, -1 == failed ( invalid socket, or
; could not queue IP packet )
;
;***************************************************************************
proc socket_write stdcall
; DEBUGF 1, "socket_write(0x%x)\n", ebx
stdcall net_socket_num_to_addr, ebx ; get real socket address
or eax, eax
jz .error
mov ebx, eax
; If the socket is invalid, return with an error code
cmp [ebx + SOCKET.Status], SOCK_EMPTY
je .error
mov eax, EMPTY_QUEUE
call dequeue
cmp ax, NO_BUFFER
je .error
; Save the queue entry number
push eax
; save the pointers to the data buffer & size
push edx
push ecx
; convert buffer pointer eax to the absolute address
mov ecx, IPBUFFSIZE
mul ecx
add eax, IPbuffs
mov edx, eax
; So, ebx holds the socket ptr, edx holds the IPbuffer ptr
; Fill in the IP header (some data is in the socket descriptor)
mov eax, [ebx + SOCKET.LocalIP]
mov [edx + IP_PACKET.SourceAddress], eax
mov eax, [ebx + SOCKET.RemoteIP]
mov [edx + IP_PACKET.DestinationAddress], eax
mov [edx + IP_PACKET.VersionAndIHL], 0x45
mov [edx + IP_PACKET.TypeOfService], 0
pop eax ; Get the UDP data length
push eax
add eax, 20 + 8 ; add IP header and UDP header lengths
xchg al, ah
mov [edx + IP_PACKET.TotalLength], ax
xor eax, eax
mov [edx + IP_PACKET.Identification], ax
mov [edx + IP_PACKET.FlagsAndFragmentOffset], 0x0040
mov [edx + IP_PACKET.TimeToLive], 0x20
mov [edx + IP_PACKET.Protocol], PROTOCOL_UDP
; Checksum left unfilled
mov [edx + IP_PACKET.HeaderChecksum], ax
; Fill in the UDP header (some data is in the socket descriptor)
mov ax, [ebx + SOCKET.LocalPort]
mov [edx + 20 + UDP_PACKET.SourcePort], ax
mov ax, [ebx + SOCKET.RemotePort]
mov [edx + 20 + UDP_PACKET.DestinationPort], ax
pop eax
push eax
add eax, 8
xchg al, ah
mov [edx + 20 + UDP_PACKET.Length], ax
; Checksum left unfilled
xor eax, eax
mov [edx + 20 + UDP_PACKET.Checksum], ax
pop ecx ; count of bytes to send
mov ebx, ecx ; need the length later
pop eax ; get callers ptr to data to send
; Get the address of the callers data
mov edi, [TASK_BASE]
add edi, TASKDATA.mem_start
add eax, [edi]
mov esi, eax
mov edi, edx
add edi, 28
cld
rep movsb ; copy the data across
; we have edx as IPbuffer ptr.
; Fill in the UDP checksum
; First, fill in pseudoheader
mov eax, [edx + IP_PACKET.SourceAddress]
mov [pseudoHeader], eax
mov eax, [edx + IP_PACKET.DestinationAddress]
mov [pseudoHeader + 4], eax
mov word[pseudoHeader + 8], PROTOCOL_UDP shl 8 + 0 ; 0 + protocol
add ebx, 8
mov eax, ebx
xchg al, ah
mov [pseudoHeader + 10], ax
mov eax, pseudoHeader
mov [checkAdd1], eax
mov [checkSize1], word 12
mov eax, edx
add eax, 20
mov [checkAdd2], eax
mov eax, ebx
mov [checkSize2], ax ; was eax!! mjh 8/7/02
call checksum
; store it in the UDP checksum ( in the correct order! )
mov ax, [checkResult]
; If the UDP checksum computes to 0, we must make it 0xffff
; (0 is reserved for 'not used')
test ax, ax
jnz @f
mov ax, 0xffff
@@: xchg al, ah
mov [edx + 20 + UDP_PACKET.Checksum], ax
; Fill in the IP header checksum
GET_IHL ecx,edx ; get IP-Header length
stdcall checksum_jb,edx,ecx ; buf_ptr, buf_size
xchg al, ah
mov [edx + IP_PACKET.HeaderChecksum], ax
; Check destination IP address.
; If it is the local host IP, route it back to IP_RX
pop ebx
mov eax, NET1OUT_QUEUE
mov ecx, [edx + SOCKET.RemoteIP]
mov edx, [stack_ip]
cmp edx, ecx
jne .not_local
mov eax, IPIN_QUEUE
.not_local:
; Send it.
call queue
xor eax, eax
ret
.error:
or eax, -1
ret
endp
;***************************************************************************
; Function
; socket_write_tcp
;
; Description
; socket in ebx
; # of bytes to write in ecx
; pointer to data in edx
; returns 0 in eax ok, -1 == failed ( invalid socket, or
; could not queue IP packet )
;
;***************************************************************************
proc socket_write_tcp stdcall
local sockAddr dd ?
; DEBUGF 1, "socket_write_tcp(0x%x)\n", ebx
stdcall net_socket_num_to_addr, ebx
or eax, eax
jz .error
mov ebx, eax
mov [sockAddr], ebx
; If the socket is invalid, return with an error code
cmp [ebx + SOCKET.Status], SOCK_EMPTY
je .error
; If the sockets window timer is nonzero, do not queue packet
; TODO - done
cmp [ebx + SOCKET.wndsizeTimer], 0
jne .error
mov eax, EMPTY_QUEUE
call dequeue
cmp ax, NO_BUFFER
je .error
push eax
; Get the address of the callers data
mov edi, [TASK_BASE]
add edi, TASKDATA.mem_start
add edx, [edi]
mov esi, edx
pop eax
push eax
push ecx
mov bl, TH_ACK
stdcall build_tcp_packet, [sockAddr]
pop ecx
; Check destination IP address.
; If it is the local host IP, route it back to IP_RX
pop ebx
push ecx
mov eax, NET1OUT_QUEUE
mov edx, [stack_ip]
mov ecx, [sockAddr]
cmp edx, [ecx + SOCKET.RemoteIP]
jne .not_local
mov eax, IPIN_QUEUE
.not_local:
pop ecx
push ebx ; save ipbuffer number
call queue
mov esi, [sockAddr]
; increament SND.NXT in socket
; Amount to increment by is in ecx
add esi, SOCKET.SND_NXT
call add_inet_esi
pop ebx
; Copy the IP buffer to a resend queue
; If there isn't one, dont worry about it for now
mov esi, resendQ
mov ecx, 0
.next_resendq:
cmp ecx, NUMRESENDENTRIES
je .exit ; None found
;cmp byte[esi], 0xff ; XTODO: 0xff -> 0
cmp dword[esi + 4], 0
je @f ; found one
inc ecx
add esi, 8
jmp .next_resendq
@@: push ebx
; OK, we have a buffer descriptor ptr in esi.
; resend entry # in ecx
; Populate it
; socket #
; retries count
; retry time
; fill IP buffer associated with this descriptor
stdcall net_socket_addr_to_num, [sockAddr]
;mov [esi], al ; XTODO: al -> eax
mov [esi + 4], eax
mov byte[esi + 1], TCP_RETRIES
mov word[esi + 2], TCP_TIMEOUT
inc ecx
; Now get buffer location, and copy buffer across. argh! more copying,,
mov edi, resendBuffer - IPBUFFSIZE
@@: add edi, IPBUFFSIZE
loop @b
; we have dest buffer location in edi
pop eax
; convert source buffer pointer eax to the absolute address
mov ecx, IPBUFFSIZE
mul ecx
add eax, IPbuffs
mov esi, eax
; do copy
mov ecx, IPBUFFSIZE
cld
rep movsb
.exit:
xor eax, eax
ret
.error:
or eax, -1
ret
endp