930 lines
32 KiB
PHP
930 lines
32 KiB
PHP
;***** THIS IS A MACHINE GENERATED FILE - DO NOT EDIT ********************
|
|
;***** Created: 2005-01-11 10:30 ******* Source: ATmega162.xml ***********
|
|
;*************************************************************************
|
|
;* A P P L I C A T I O N N O T E F O R T H E A V R F A M I L Y
|
|
;*
|
|
;* Number : AVR000
|
|
;* File Name : "m162def.inc"
|
|
;* Title : Register/Bit Definitions for the ATmega162
|
|
;* Date : 2005-01-11
|
|
;* Version : 2.14
|
|
;* Support E-mail : avr@atmel.com
|
|
;* Target MCU : ATmega162
|
|
;*
|
|
;* DESCRIPTION
|
|
;* When including this file in the assembly program file, all I/O register
|
|
;* names and I/O register bit names appearing in the data book can be used.
|
|
;* In addition, the six registers forming the three data pointers X, Y and
|
|
;* Z have been assigned names XL - ZH. Highest RAM address for Internal
|
|
;* SRAM is also defined
|
|
;*
|
|
;* The Register names are represented by their hexadecimal address.
|
|
;*
|
|
;* The Register Bit names are represented by their bit number (0-7).
|
|
;*
|
|
;* Please observe the difference in using the bit names with instructions
|
|
;* such as "sbr"/"cbr" (set/clear bit in register) and "sbrs"/"sbrc"
|
|
;* (skip if bit in register set/cleared). The following example illustrates
|
|
;* this:
|
|
;*
|
|
;* in r16,PORTB ;read PORTB latch
|
|
;* sbr r16,(1<<PB6)+(1<<PB5) ;set PB6 and PB5 (use masks, not bit#)
|
|
;* out PORTB,r16 ;output to PORTB
|
|
;*
|
|
;* in r16,TIFR ;read the Timer Interrupt Flag Register
|
|
;* sbrc r16,TOV0 ;test the overflow flag (use bit#)
|
|
;* rjmp TOV0_is_set ;jump if set
|
|
;* ... ;otherwise do something else
|
|
;*************************************************************************
|
|
|
|
#ifndef _M162DEF_INC_
|
|
#define _M162DEF_INC_
|
|
|
|
|
|
#pragma partinc 0
|
|
|
|
; ***** SPECIFY DEVICE ***************************************************
|
|
.device ATmega162
|
|
#pragma AVRPART ADMIN PART_NAME ATmega162
|
|
.equ SIGNATURE_000 = 0x1e
|
|
.equ SIGNATURE_001 = 0x94
|
|
.equ SIGNATURE_002 = 0x04
|
|
|
|
#pragma AVRPART CORE CORE_VERSION V2E
|
|
|
|
|
|
; ***** I/O REGISTER DEFINITIONS *****************************************
|
|
; NOTE:
|
|
; Definitions marked "MEMORY MAPPED"are extended I/O ports
|
|
; and cannot be used with IN/OUT instructions
|
|
.equ TCCR3A = 0x8b ; MEMORY MAPPED
|
|
.equ TCCR3B = 0x8a ; MEMORY MAPPED
|
|
.equ TCNT3H = 0x89 ; MEMORY MAPPED
|
|
.equ TCNT3L = 0x88 ; MEMORY MAPPED
|
|
.equ OCR3AH = 0x87 ; MEMORY MAPPED
|
|
.equ OCR3AL = 0x86 ; MEMORY MAPPED
|
|
.equ OCR3BH = 0x85 ; MEMORY MAPPED
|
|
.equ OCR3BL = 0x84 ; MEMORY MAPPED
|
|
.equ ICR3H = 0x81 ; MEMORY MAPPED
|
|
.equ ICR3L = 0x80 ; MEMORY MAPPED
|
|
.equ ETIMSK = 0x7d ; MEMORY MAPPED
|
|
.equ ETIFR = 0x7c ; MEMORY MAPPED
|
|
.equ PCMSK1 = 0x6c ; MEMORY MAPPED
|
|
.equ PCMSK0 = 0x6b ; MEMORY MAPPED
|
|
.equ CLKPR = 0x61 ; MEMORY MAPPED
|
|
.equ SREG = 0x3f
|
|
.equ SPH = 0x3e
|
|
.equ SPL = 0x3d
|
|
.equ UBRR1H = 0x3c
|
|
.equ UCSR1C = 0x3c
|
|
.equ GICR = 0x3b
|
|
.equ GIFR = 0x3a
|
|
.equ TIMSK = 0x39
|
|
.equ TIFR = 0x38
|
|
.equ SPMCR = 0x37
|
|
.equ EMCUCR = 0x36
|
|
.equ MCUCR = 0x35
|
|
.equ MCUCSR = 0x34
|
|
.equ TCCR0 = 0x33
|
|
.equ TCNT0 = 0x32
|
|
.equ OCR0 = 0x31
|
|
.equ SFIOR = 0x30
|
|
.equ TCCR1A = 0x2f
|
|
.equ TCCR1B = 0x2e
|
|
.equ TCNT1H = 0x2d
|
|
.equ TCNT1L = 0x2c
|
|
.equ OCR1AH = 0x2b
|
|
.equ OCR1AL = 0x2a
|
|
.equ OCR1BH = 0x29
|
|
.equ OCR1BL = 0x28
|
|
.equ TCCR2 = 0x27
|
|
.equ ASSR = 0x26
|
|
.equ ICR1H = 0x25
|
|
.equ ICR1L = 0x24
|
|
.equ TCNT2 = 0x23
|
|
.equ OCR2 = 0x22
|
|
.equ WDTCR = 0x21
|
|
.equ UBRR0H = 0x20
|
|
.equ UCSR0C = 0x20
|
|
.equ EEARH = 0x1f
|
|
.equ EEARL = 0x1e
|
|
.equ EEDR = 0x1d
|
|
.equ EECR = 0x1c
|
|
.equ PORTA = 0x1b
|
|
.equ DDRA = 0x1a
|
|
.equ PINA = 0x19
|
|
.equ PORTB = 0x18
|
|
.equ DDRB = 0x17
|
|
.equ PINB = 0x16
|
|
.equ PORTC = 0x15
|
|
.equ DDRC = 0x14
|
|
.equ PINC = 0x13
|
|
.equ PORTD = 0x12
|
|
.equ DDRD = 0x11
|
|
.equ PIND = 0x10
|
|
.equ SPDR = 0x0f
|
|
.equ SPSR = 0x0e
|
|
.equ SPCR = 0x0d
|
|
.equ UDR0 = 0x0c
|
|
.equ UCSR0A = 0x0b
|
|
.equ UCSR0B = 0x0a
|
|
.equ UBRR0L = 0x09
|
|
.equ ACSR = 0x08
|
|
.equ PORTE = 0x07
|
|
.equ DDRE = 0x06
|
|
.equ PINE = 0x05
|
|
.equ OSCCAL = 0x04
|
|
.equ OCDR = 0x04
|
|
.equ UDR1 = 0x03
|
|
.equ UCSR1A = 0x02
|
|
.equ UCSR1B = 0x01
|
|
.equ UBRR1L = 0x00
|
|
|
|
|
|
; ***** BIT DEFINITIONS **************************************************
|
|
|
|
; ***** TIMER_COUNTER_1 **************
|
|
; TIMSK - Timer/Counter Interrupt Mask Register
|
|
.equ TICIE1 = 3 ; Timer/Counter1 Input Capture Interrupt Enable
|
|
.equ OCIE1B = 5 ; Timer/Counter1 Output CompareB Match Interrupt Enable
|
|
.equ OCIE1A = 6 ; Timer/Counter1 Output CompareA Match Interrupt Enable
|
|
.equ TOIE1 = 7 ; Timer/Counter1 Overflow Interrupt Enable
|
|
|
|
; TIFR - Timer/Counter Interrupt Flag register
|
|
.equ ICF1 = 3 ; Input Capture Flag 1
|
|
.equ OCF1B = 5 ; Output Compare Flag 1B
|
|
.equ OCF1A = 6 ; Output Compare Flag 1A
|
|
.equ TOV1 = 7 ; Timer/Counter1 Overflow Flag
|
|
|
|
; TCCR1A - Timer/Counter1 Control Register A
|
|
.equ WGM10 = 0 ; Pulse Width Modulator Select Bit 0
|
|
.equ PWM10 = WGM10 ; For compatibility
|
|
.equ WGM11 = 1 ; Pulse Width Modulator Select Bit 1
|
|
.equ PWM11 = WGM11 ; For compatibility
|
|
.equ FOC1B = 2 ; Force Output Compare for Channel B
|
|
.equ FOC1A = 3 ; Force Output Compare for Channel A
|
|
.equ COM1B0 = 4 ; Compare Output Mode 1B, bit 0
|
|
.equ COM1B1 = 5 ; Compare Output Mode 1B, bit 1
|
|
.equ COM1A0 = 6 ; Compare Ouput Mode 1A, bit 0
|
|
.equ COM1A1 = 7 ; Compare Output Mode 1A, bit 1
|
|
|
|
; TCCR1B - Timer/Counter1 Control Register B
|
|
.equ CS10 = 0 ; Clock Select1 bit 0
|
|
.equ CS11 = 1 ; Clock Select1 bit 1
|
|
.equ CS12 = 2 ; Clock Select1 bit 2
|
|
.equ WGM12 = 3 ; Pulse Width Modulator Select Bit 2
|
|
.equ CTC10 = WGM12 ; For compatibility
|
|
.equ WGM13 = 4 ; Pulse Width Modulator Select Bit 3
|
|
.equ CTC11 = WGM13 ; For compatibility
|
|
.equ ICES1 = 6 ; Input Capture 1 Edge Select
|
|
.equ ICNC1 = 7 ; Input Capture 1 Noise Canceler
|
|
|
|
|
|
; ***** TIMER_COUNTER_2 **************
|
|
; TCCR2 - Timer/Counter Control Register
|
|
.equ CS20 = 0 ; Clock Select
|
|
.equ CS21 = 1 ; Clock Select
|
|
.equ CS22 = 2 ; Clock Select
|
|
.equ WGM21 = 3 ; Pulse Width Modulator Select Bit 1
|
|
.equ CTC2 = WGM21 ; For compatibility
|
|
.equ COM20 = 4 ; Compare Match Output Mode
|
|
.equ COM21 = 5 ; Compare Match Output Mode
|
|
.equ WGM20 = 6 ; Pulse Width Modulator Select Bit 0
|
|
.equ PWM2 = WGM20 ; For compatibility
|
|
.equ FOC2 = 7 ; Forde Output Compare
|
|
|
|
; TCNT2 - Timer/Counter Register
|
|
.equ TCNT2_0 = 0 ; Timer/Counter Register Bit 0
|
|
.equ TCNT2_1 = 1 ; Timer/Counter Register Bit 1
|
|
.equ TCNT2_2 = 2 ; Timer/Counter Register Bit 2
|
|
.equ TCNT2_3 = 3 ; Timer/Counter Register Bit 3
|
|
.equ TCNT2_4 = 4 ; Timer/Counter Register Bit 4
|
|
.equ TCNT2_5 = 5 ; Timer/Counter Register Bit 5
|
|
.equ TCNT2_6 = 6 ; Timer/Counter Register Bit 6
|
|
.equ TCNT2_7 = 7 ; Timer/Counter Register Bit 7
|
|
|
|
; OCR2 - Output Compare Register
|
|
.equ OCR2_0 = 0 ; Output Compare Register Bit 0
|
|
.equ OCR2_1 = 1 ; Output Compare Register Bit 1
|
|
.equ OCR2_2 = 2 ; Output Compare Register Bit 2
|
|
.equ OCR2_3 = 3 ; Output Compare Register Bit 3
|
|
.equ OCR2_4 = 4 ; Output Compare Register Bit 4
|
|
.equ OCR2_5 = 5 ; Output Compare Register Bit 5
|
|
.equ OCR2_6 = 6 ; Output Compare Register Bit 6
|
|
.equ OCR2_7 = 7 ; Output Compare Register Bit 7
|
|
|
|
; TIMSK - Timer/Counter Interrupt Mask Register
|
|
.equ TOIE2 = 2 ; Timer/Counter2 Overflow Interrupt Enable
|
|
.equ OCIE2 = 4 ; Timer/Counter2 Output Compare Match Interrupt Enable
|
|
|
|
; TIFR - Timer/Counter Interrupt Flag Register
|
|
.equ TOV2 = 2 ; Timer/Counter2 Overflow Flag
|
|
.equ OCF2 = 4 ; Output Compare Flag 2
|
|
|
|
; ASSR - Asynchronous Status Register
|
|
.equ TCR2UB = 0 ; Timer/Counter Control Register2 Update Busy
|
|
.equ OCR2UB = 1 ; Output Compare Register2 Update Busy
|
|
.equ TCN2UB = 2 ; Timer/Counter2 Update Busy
|
|
.equ AS2 = 3 ; Asynchronous Timer 2
|
|
|
|
|
|
; ***** TIMER_COUNTER_3 **************
|
|
; ETIMSK - Extended Timer/Counter Interrupt Mask Register
|
|
.equ TOIE3 = 2 ; Timer/Counter3 Overflow Interrupt Enable
|
|
.equ OCIE3B = 3 ; Timer/Counter3 Output CompareB Match Interrupt Enable
|
|
.equ OCIE3A = 4 ; Timer/Counter3 Output CompareA Match Interrupt Enable
|
|
.equ TICIE3 = 5 ; Timer/Counter3 Input Capture Interrupt Enable
|
|
|
|
; ETIFR - Extended Timer/Counter Interrupt Flag register
|
|
.equ TOV3 = 2 ; Timer/Counter3 Overflow Flag
|
|
.equ OCF3B = 3 ; Output Compare Flag 3B
|
|
.equ OCF3A = 4 ; Output Compare Flag 3A
|
|
.equ ICF3 = 5 ; Input Capture Flag 3
|
|
|
|
; TCCR3A - Timer/Counter3 Control Register A
|
|
.equ WGM30 = 0 ; Pulse Width Modulator Select Bit 0
|
|
.equ WGM31 = 1 ; Pulse Width Modulator Select Bit 1
|
|
.equ FOC3B = 2 ; Force Output Compare for Channel B
|
|
.equ FOC3A = 3 ; Force Output Compare for Channel A
|
|
.equ COM3B0 = 4 ; Compare Output Mode 3B, bit 0
|
|
.equ COM3B1 = 5 ; Compare Output Mode 3B, bit 1
|
|
.equ COM3A0 = 6 ; Compare Ouput Mode 3A, bit 0
|
|
.equ COM3A1 = 7 ; Compare Output Mode 3A, bit 1
|
|
|
|
; TCCR3B - Timer/Counter3 Control Register B
|
|
.equ CS30 = 0 ; Clock Select3 bit 0
|
|
.equ CS31 = 1 ; Clock Select3 bit 1
|
|
.equ CS32 = 2 ; Clock Select3 bit 2
|
|
.equ WGM32 = 3 ; Pulse Width Modulator Select Bit 2
|
|
.equ WGM33 = 4 ; Pulse Width Modulator Select Bit 3
|
|
.equ ICES3 = 6 ; Input Capture 3 Edge Select
|
|
.equ ICNC3 = 7 ; Input Capture 3 Noise Canceler
|
|
|
|
|
|
; ***** ANALOG_COMPARATOR ************
|
|
; ACSR - Analog Comparator Control And Status Register
|
|
.equ ACIS0 = 0 ; Analog Comparator Interrupt Mode Select bit 0
|
|
.equ ACIS1 = 1 ; Analog Comparator Interrupt Mode Select bit 1
|
|
.equ ACIC = 2 ; Analog Comparator Input Capture Enable
|
|
.equ ACIE = 3 ; Analog Comparator Interrupt Enable
|
|
.equ ACI = 4 ; Analog Comparator Interrupt Flag
|
|
.equ ACO = 5 ; Analog Compare Output
|
|
.equ ACBG = 6 ; Analog Comparator Bandgap Select
|
|
.equ AINBG = ACBG ; For compatibility
|
|
.equ ACD = 7 ; Analog Comparator Disable
|
|
|
|
|
|
; ***** USART0 ***********************
|
|
; UDR0 - USART I/O Data Register
|
|
.equ UDR = UDR0 ; For compatibility
|
|
.equ UDR0_0 = 0 ; USART I/O Data Register bit 0
|
|
.equ UDR0_1 = 1 ; USART I/O Data Register bit 1
|
|
.equ UDR0_2 = 2 ; USART I/O Data Register bit 2
|
|
.equ UDR0_3 = 3 ; USART I/O Data Register bit 3
|
|
.equ UDR0_4 = 4 ; USART I/O Data Register bit 4
|
|
.equ UDR0_5 = 5 ; USART I/O Data Register bit 5
|
|
.equ UDR0_6 = 6 ; USART I/O Data Register bit 6
|
|
.equ UDR0_7 = 7 ; USART I/O Data Register bit 7
|
|
|
|
; UCSR0A - USART Control and Status Register A
|
|
.equ USR = UCSR0A ; For compatibility
|
|
.equ MPCM0 = 0 ; Multi-processor Communication Mode
|
|
.equ U2X0 = 1 ; Double the USART transmission speed
|
|
.equ U2X = U2X0 ; For compatibility
|
|
.equ UPE0 = 2 ; Parity Error
|
|
.equ DOR0 = 3 ; Data overRun
|
|
.equ DOR = DOR0 ; For compatibility
|
|
.equ FE0 = 4 ; Framing Error
|
|
.equ FE = FE0 ; For compatibility
|
|
.equ UDRE0 = 5 ; USART Data Register Empty
|
|
.equ UDRE = UDRE0 ; For compatibility
|
|
.equ TXC0 = 6 ; USART Transmitt Complete
|
|
.equ TXC = TXC0 ; For compatibility
|
|
.equ RXC0 = 7 ; USART Receive Complete
|
|
.equ RXC = RXC0 ; For compatibility
|
|
|
|
; UCSR0B - USART Control and Status Register B
|
|
.equ UCR = UCSR0B ; For compatibility
|
|
.equ TXB80 = 0 ; Transmit Data Bit 8
|
|
.equ TXB8 = TXB80 ; For compatibility
|
|
.equ RXB80 = 1 ; Receive Data Bit 8
|
|
.equ RXB8 = RXB80 ; For compatibility
|
|
.equ UCSZ02 = 2 ; Character Size
|
|
.equ UCSZ2 = UCSZ02 ; For compatibility
|
|
.equ TXEN0 = 3 ; Transmitter Enable
|
|
.equ TXEN = TXEN0 ; For compatibility
|
|
.equ RXEN0 = 4 ; Receiver Enable
|
|
.equ RXEN = RXEN0 ; For compatibility
|
|
.equ UDRIE0 = 5 ; USART Data register Empty Interrupt Enable
|
|
.equ UDRIE = UDRIE0 ; For compatibility
|
|
.equ TXCIE0 = 6 ; TX Complete Interrupt Enable
|
|
.equ TXCIE = TXCIE0 ; For compatibility
|
|
.equ RXCIE0 = 7 ; RX Complete Interrupt Enable
|
|
.equ RXCIE = RXCIE0 ; For compatibility
|
|
|
|
; UCSR0C - USART Control and Status Register C
|
|
.equ UBRRHI = UCSR0C ; For compatibility
|
|
.equ UCPOL0 = 0 ; Clock Polarity
|
|
.equ UCSZ00 = 1 ; Character Size
|
|
.equ UCSZ01 = 2 ; Character Size
|
|
.equ USBS0 = 3 ; Stop Bit Select
|
|
.equ UPM00 = 4 ; Parity Mode Bit 0
|
|
.equ UPM01 = 5 ; Parity Mode Bit 1
|
|
.equ UMSEL0 = 6 ; USART Mode Select
|
|
.equ URSEL = 7 ; Register Select
|
|
|
|
.equ UBRR0 = UBRR0L ; For compatibility
|
|
.equ UBRR = UBRR0L ; For compatibility
|
|
|
|
; ***** USART1 ***********************
|
|
; UDR1 - USART I/O Data Register
|
|
.equ UDR1_0 = 0 ; USART1 I/O Data Register bit 0
|
|
.equ UDR1_1 = 1 ; USART1 I/O Data Register bit 1
|
|
.equ UDR1_2 = 2 ; USART1 I/O Data Register bit 2
|
|
.equ UDR1_3 = 3 ; USART1 I/O Data Register bit 3
|
|
.equ UDR1_4 = 4 ; USART1 I/O Data Register bit 4
|
|
.equ UDR1_5 = 5 ; USART1 I/O Data Register bit 5
|
|
.equ UDR1_6 = 6 ; USART1 I/O Data Register bit 6
|
|
.equ UDR1_7 = 7 ; USART1 I/O Data Register bit 7
|
|
|
|
; UCSR1A - USART Control and Status Register A
|
|
.equ MPCM1 = 0 ; Multi-processor Communication Mode
|
|
.equ U2X1 = 1 ; Double the USART transmission speed
|
|
.equ UPE1 = 2 ; Parity Error
|
|
.equ DOR1 = 3 ; Data overRun
|
|
.equ FE1 = 4 ; Framing Error
|
|
.equ UDRE1 = 5 ; USART Data Register Empty
|
|
.equ TXC1 = 6 ; USART Transmitt Complete
|
|
.equ RXC1 = 7 ; USART Receive Complete
|
|
|
|
; UCSR1B - USART Control and Status Register B
|
|
.equ TXB81 = 0 ; Transmit Data Bit 8
|
|
.equ RXB81 = 1 ; Receive Data Bit 8
|
|
.equ UCSZ12 = 2 ; Character Size
|
|
.equ CHR91 = UCSZ12 ; For compatibility
|
|
.equ TXEN1 = 3 ; Transmitter Enable
|
|
.equ RXEN1 = 4 ; Receiver Enable
|
|
.equ UDRIE1 = 5 ; USART Data register Empty Interrupt Enable
|
|
.equ TXCIE1 = 6 ; TX Complete Interrupt Enable
|
|
.equ RXCIE1 = 7 ; RX Complete Interrupt Enable
|
|
|
|
; UCSR1C - USART Control and Status Register C
|
|
.equ UCPOL = 0 ; Clock Polarity
|
|
.equ UCSZ0 = 1 ; Character Size
|
|
.equ UCSZ1 = 2 ; Character Size
|
|
.equ USBS = 3 ; Stop Bit Select
|
|
.equ UPM0 = 4 ; Parity Mode Bit 0
|
|
.equ UPM1 = 5 ; Parity Mode Bit 1
|
|
.equ UMSEL = 6 ; USART Mode Select
|
|
;.equ URSEL = 7 ; Register Select
|
|
|
|
.equ UBRR1 = UBRR1L ; For compatibility
|
|
|
|
; ***** SPI **************************
|
|
; SPDR - SPI Data Register
|
|
.equ SPDR0 = 0 ; SPI Data Register bit 0
|
|
.equ SPDR1 = 1 ; SPI Data Register bit 1
|
|
.equ SPDR2 = 2 ; SPI Data Register bit 2
|
|
.equ SPDR3 = 3 ; SPI Data Register bit 3
|
|
.equ SPDR4 = 4 ; SPI Data Register bit 4
|
|
.equ SPDR5 = 5 ; SPI Data Register bit 5
|
|
.equ SPDR6 = 6 ; SPI Data Register bit 6
|
|
.equ SPDR7 = 7 ; SPI Data Register bit 7
|
|
|
|
; SPSR - SPI Status Register
|
|
.equ SPI2X = 0 ; Double SPI Speed Bit
|
|
.equ WCOL = 6 ; Write Collision Flag
|
|
.equ SPIF = 7 ; SPI Interrupt Flag
|
|
|
|
; SPCR - SPI Control Register
|
|
.equ SPR0 = 0 ; SPI Clock Rate Select 0
|
|
.equ SPR1 = 1 ; SPI Clock Rate Select 1
|
|
.equ CPHA = 2 ; Clock Phase
|
|
.equ CPOL = 3 ; Clock polarity
|
|
.equ MSTR = 4 ; Master/Slave Select
|
|
.equ DORD = 5 ; Data Order
|
|
.equ SPE = 6 ; SPI Enable
|
|
.equ SPIE = 7 ; SPI Interrupt Enable
|
|
|
|
|
|
; ***** CPU **************************
|
|
; SREG - Status Register
|
|
.equ SREG_C = 0 ; Carry Flag
|
|
.equ SREG_Z = 1 ; Zero Flag
|
|
.equ SREG_N = 2 ; Negative Flag
|
|
.equ SREG_V = 3 ; Two's Complement Overflow Flag
|
|
.equ SREG_S = 4 ; Sign Bit
|
|
.equ SREG_H = 5 ; Half Carry Flag
|
|
.equ SREG_T = 6 ; Bit Copy Storage
|
|
.equ SREG_I = 7 ; Global Interrupt Enable
|
|
|
|
; MCUCR - MCU Control Register
|
|
.equ ISC00 = 0 ; Interrupt Sense Control 0 bit 0
|
|
.equ ISC01 = 1 ; Interrupt Sense Control 0 bit 1
|
|
.equ ISC10 = 2 ; Interrupt Sense Control 1 bit 1
|
|
.equ ISC11 = 3 ; Interrupt Sense Control 1 bit 1
|
|
.equ SM1 = 4 ; Sleep Mode Select
|
|
.equ SM = SM1 ; For compatibility
|
|
.equ SE = 5 ; Sleep Enable
|
|
.equ SRW10 = 6 ; External SRAM Wait State Select
|
|
.equ SRW = SRW10 ; For compatibility
|
|
.equ SRE = 7 ; External SRAM Enable
|
|
|
|
; MCUCSR - MCU Control And Status Register
|
|
.equ MCUSR = MCUCSR ; For compatibility
|
|
.equ PORF = 0 ; Power-on reset flag
|
|
.equ EXTRF = 1 ; External Reset Flag
|
|
.equ BORF = 2 ; Brown-out Reset Flag
|
|
.equ WDRF = 3 ; Watchdog Reset Flag
|
|
.equ JTRF = 4 ; JTAG Reset Flag
|
|
.equ SM2 = 5 ; Sleep Mode Select Bit 2
|
|
.equ JDT = 7 ; JTAG Interface Disable
|
|
|
|
; EMCUCR - Extended MCU Control Register
|
|
.equ ISC2 = 0 ; Interrupt Sense Control 2
|
|
.equ SRW11 = 1 ; Wait State Select Bit 1 for Upper Sector
|
|
.equ SRW00 = 2 ; Wait State Select Bit 0 for Lower Sector
|
|
.equ SRW01 = 3 ; Wait State Select Bit 1 for Lower Sector
|
|
.equ SRL0 = 4 ; Wait State Sector Limit Bit 0
|
|
.equ SRL1 = 5 ; Wait State Sector Limit Bit 1
|
|
.equ SRL2 = 6 ; Wait State Sector Limit Bit 2
|
|
.equ SM0 = 7 ; Sleep mode Select Bit 0
|
|
|
|
; OSCCAL - Oscillator Calibration Value
|
|
.equ CAL0 = 0 ; Oscillator Calibration Value Bit0
|
|
.equ CAL1 = 1 ; Oscillator Calibration Value Bit1
|
|
.equ CAL2 = 2 ; Oscillator Calibration Value Bit2
|
|
.equ CAL3 = 3 ; Oscillator Calibration Value Bit3
|
|
.equ CAL4 = 4 ; Oscillator Calibration Value Bit4
|
|
.equ CAL5 = 5 ; Oscillator Calibration Value Bit5
|
|
.equ CAL6 = 6 ; Oscillator Calibration Value Bit6
|
|
|
|
; CLKPR - Oscillator Calibration Value
|
|
.equ CLKPS0 = 0 ; Clock Prescaler Select Bit 0
|
|
.equ CLKPS1 = 1 ; Clock Prescaler Select Bit 1
|
|
.equ CLKPS2 = 2 ; Clock Prescaler Select Bit 2
|
|
.equ CLKPS3 = 3 ; Clock Prescaler Select Bit 3
|
|
.equ CLKPCE = 7 ; Clock Prescaler Change Enable
|
|
|
|
; SFIOR - Special Function IO Register
|
|
.equ PSR310 = 0 ; Prescaler Reset Timer/Counter3, Timer/Counter1 and Timer/Counter0
|
|
.equ PSR10 = PSR310 ; For compatibility
|
|
.equ PSR0 = PSR310 ; For compatibility
|
|
.equ PSR1 = PSR310 ; For compatibility
|
|
.equ PSR2 = 1 ; Prescaler Reset Timer/Counter2
|
|
.equ PUD = 2 ; Pull-up Disable
|
|
.equ XMM0 = 3 ; External Memory High Mask Bit 0
|
|
.equ XMM1 = 4 ; External Memory High Mask Bit 1
|
|
.equ XMM2 = 5 ; External Memory High Mask Bit 2
|
|
.equ XMBK = 6 ; External Memory Bus Keeper Enable
|
|
.equ TSM = 7 ; Timer/Counter Synchronization Mode
|
|
|
|
|
|
; ***** JTAG *************************
|
|
; OCDR - On-Chip Debug Related Register in I/O Memory
|
|
.equ OCDR0 = 0 ; On-Chip Debug Register Bit 0
|
|
.equ OCDR1 = 1 ; On-Chip Debug Register Bit 1
|
|
.equ OCDR2 = 2 ; On-Chip Debug Register Bit 2
|
|
.equ OCDR3 = 3 ; On-Chip Debug Register Bit 3
|
|
.equ OCDR4 = 4 ; On-Chip Debug Register Bit 4
|
|
.equ OCDR5 = 5 ; On-Chip Debug Register Bit 5
|
|
.equ OCDR6 = 6 ; On-Chip Debug Register Bit 6
|
|
.equ OCDR7 = 7 ; On-Chip Debug Register Bit 7
|
|
.equ IDRD = OCDR7 ; For compatibility
|
|
|
|
; MCUCSR - MCU Control And Status Register
|
|
;.equ JTRF = 4 ; JTAG Reset Flag
|
|
.equ JTD = 7 ; JTAG Interface Disable
|
|
|
|
|
|
; ***** BOOT_LOAD ********************
|
|
; SPMCR - Store Program Memory Control Register
|
|
.equ SPMEN = 0 ; Store Program Memory Enable
|
|
.equ PGERS = 1 ; Page Erase
|
|
.equ PGWRT = 2 ; Page Write
|
|
.equ BLBSET = 3 ; Boot Lock Bit Set
|
|
.equ RWWSRE = 4 ; Read While Write secion read enable
|
|
.equ ASRE = RWWSRE ; For compatibility
|
|
.equ RWWSB = 6 ; Read While Write Section Busy
|
|
.equ ASB = RWWSB ; For compatibility
|
|
.equ SPMIE = 7 ; SPM Interrupt Enable
|
|
|
|
|
|
; ***** EEPROM ***********************
|
|
; EEDR - EEPROM Data Register
|
|
.equ EEDR0 = 0 ; EEPROM Data Register bit 0
|
|
.equ EEDR1 = 1 ; EEPROM Data Register bit 1
|
|
.equ EEDR2 = 2 ; EEPROM Data Register bit 2
|
|
.equ EEDR3 = 3 ; EEPROM Data Register bit 3
|
|
.equ EEDR4 = 4 ; EEPROM Data Register bit 4
|
|
.equ EEDR5 = 5 ; EEPROM Data Register bit 5
|
|
.equ EEDR6 = 6 ; EEPROM Data Register bit 6
|
|
.equ EEDR7 = 7 ; EEPROM Data Register bit 7
|
|
|
|
; EECR - EEPROM Control Register
|
|
.equ EERE = 0 ; EEPROM Read Enable
|
|
.equ EEWE = 1 ; EEPROM Write Enable
|
|
.equ EEMWE = 2 ; EEPROM Master Write Enable
|
|
.equ EEWEE = EEMWE ; For compatibility
|
|
.equ EERIE = 3 ; EEPROM Ready Interrupt Enable
|
|
|
|
|
|
; ***** PORTA ************************
|
|
; PORTA - Port A Data Register
|
|
.equ PORTA0 = 0 ; Port A Data Register bit 0
|
|
.equ PA0 = 0 ; For compatibility
|
|
.equ PORTA1 = 1 ; Port A Data Register bit 1
|
|
.equ PA1 = 1 ; For compatibility
|
|
.equ PORTA2 = 2 ; Port A Data Register bit 2
|
|
.equ PA2 = 2 ; For compatibility
|
|
.equ PORTA3 = 3 ; Port A Data Register bit 3
|
|
.equ PA3 = 3 ; For compatibility
|
|
.equ PORTA4 = 4 ; Port A Data Register bit 4
|
|
.equ PA4 = 4 ; For compatibility
|
|
.equ PORTA5 = 5 ; Port A Data Register bit 5
|
|
.equ PA5 = 5 ; For compatibility
|
|
.equ PORTA6 = 6 ; Port A Data Register bit 6
|
|
.equ PA6 = 6 ; For compatibility
|
|
.equ PORTA7 = 7 ; Port A Data Register bit 7
|
|
.equ PA7 = 7 ; For compatibility
|
|
|
|
; DDRA - Port A Data Direction Register
|
|
.equ DDA0 = 0 ; Data Direction Register, Port A, bit 0
|
|
.equ DDA1 = 1 ; Data Direction Register, Port A, bit 1
|
|
.equ DDA2 = 2 ; Data Direction Register, Port A, bit 2
|
|
.equ DDA3 = 3 ; Data Direction Register, Port A, bit 3
|
|
.equ DDA4 = 4 ; Data Direction Register, Port A, bit 4
|
|
.equ DDA5 = 5 ; Data Direction Register, Port A, bit 5
|
|
.equ DDA6 = 6 ; Data Direction Register, Port A, bit 6
|
|
.equ DDA7 = 7 ; Data Direction Register, Port A, bit 7
|
|
|
|
; PINA - Port A Input Pins
|
|
.equ PINA0 = 0 ; Input Pins, Port A bit 0
|
|
.equ PINA1 = 1 ; Input Pins, Port A bit 1
|
|
.equ PINA2 = 2 ; Input Pins, Port A bit 2
|
|
.equ PINA3 = 3 ; Input Pins, Port A bit 3
|
|
.equ PINA4 = 4 ; Input Pins, Port A bit 4
|
|
.equ PINA5 = 5 ; Input Pins, Port A bit 5
|
|
.equ PINA6 = 6 ; Input Pins, Port A bit 6
|
|
.equ PINA7 = 7 ; Input Pins, Port A bit 7
|
|
|
|
|
|
; ***** PORTB ************************
|
|
; PORTB - Port B Data Register
|
|
.equ PORTB0 = 0 ; Port B Data Register bit 0
|
|
.equ PB0 = 0 ; For compatibility
|
|
.equ PORTB1 = 1 ; Port B Data Register bit 1
|
|
.equ PB1 = 1 ; For compatibility
|
|
.equ PORTB2 = 2 ; Port B Data Register bit 2
|
|
.equ PB2 = 2 ; For compatibility
|
|
.equ PORTB3 = 3 ; Port B Data Register bit 3
|
|
.equ PB3 = 3 ; For compatibility
|
|
.equ PORTB4 = 4 ; Port B Data Register bit 4
|
|
.equ PB4 = 4 ; For compatibility
|
|
.equ PORTB5 = 5 ; Port B Data Register bit 5
|
|
.equ PB5 = 5 ; For compatibility
|
|
.equ PORTB6 = 6 ; Port B Data Register bit 6
|
|
.equ PB6 = 6 ; For compatibility
|
|
.equ PORTB7 = 7 ; Port B Data Register bit 7
|
|
.equ PB7 = 7 ; For compatibility
|
|
|
|
; DDRB - Port B Data Direction Register
|
|
.equ DDB0 = 0 ; Port B Data Direction Register bit 0
|
|
.equ DDB1 = 1 ; Port B Data Direction Register bit 1
|
|
.equ DDB2 = 2 ; Port B Data Direction Register bit 2
|
|
.equ DDB3 = 3 ; Port B Data Direction Register bit 3
|
|
.equ DDB4 = 4 ; Port B Data Direction Register bit 4
|
|
.equ DDB5 = 5 ; Port B Data Direction Register bit 5
|
|
.equ DDB6 = 6 ; Port B Data Direction Register bit 6
|
|
.equ DDB7 = 7 ; Port B Data Direction Register bit 7
|
|
|
|
; PINB - Port B Input Pins
|
|
.equ PINB0 = 0 ; Port B Input Pins bit 0
|
|
.equ PINB1 = 1 ; Port B Input Pins bit 1
|
|
.equ PINB2 = 2 ; Port B Input Pins bit 2
|
|
.equ PINB3 = 3 ; Port B Input Pins bit 3
|
|
.equ PINB4 = 4 ; Port B Input Pins bit 4
|
|
.equ PINB5 = 5 ; Port B Input Pins bit 5
|
|
.equ PINB6 = 6 ; Port B Input Pins bit 6
|
|
.equ PINB7 = 7 ; Port B Input Pins bit 7
|
|
|
|
|
|
; ***** PORTC ************************
|
|
; PORTC - Port C Data Register
|
|
.equ PORTC0 = 0 ; Port C Data Register bit 0
|
|
.equ PC0 = 0 ; For compatibility
|
|
.equ PORTC1 = 1 ; Port C Data Register bit 1
|
|
.equ PC1 = 1 ; For compatibility
|
|
.equ PORTC2 = 2 ; Port C Data Register bit 2
|
|
.equ PC2 = 2 ; For compatibility
|
|
.equ PORTC3 = 3 ; Port C Data Register bit 3
|
|
.equ PC3 = 3 ; For compatibility
|
|
.equ PORTC4 = 4 ; Port C Data Register bit 4
|
|
.equ PC4 = 4 ; For compatibility
|
|
.equ PORTC5 = 5 ; Port C Data Register bit 5
|
|
.equ PC5 = 5 ; For compatibility
|
|
.equ PORTC6 = 6 ; Port C Data Register bit 6
|
|
.equ PC6 = 6 ; For compatibility
|
|
.equ PORTC7 = 7 ; Port C Data Register bit 7
|
|
.equ PC7 = 7 ; For compatibility
|
|
|
|
; DDRC - Port C Data Direction Register
|
|
.equ DDC0 = 0 ; Port C Data Direction Register bit 0
|
|
.equ DDC1 = 1 ; Port C Data Direction Register bit 1
|
|
.equ DDC2 = 2 ; Port C Data Direction Register bit 2
|
|
.equ DDC3 = 3 ; Port C Data Direction Register bit 3
|
|
.equ DDC4 = 4 ; Port C Data Direction Register bit 4
|
|
.equ DDC5 = 5 ; Port C Data Direction Register bit 5
|
|
.equ DDC6 = 6 ; Port C Data Direction Register bit 6
|
|
.equ DDC7 = 7 ; Port C Data Direction Register bit 7
|
|
|
|
; PINC - Port C Input Pins
|
|
.equ PINC0 = 0 ; Port C Input Pins bit 0
|
|
.equ PINC1 = 1 ; Port C Input Pins bit 1
|
|
.equ PINC2 = 2 ; Port C Input Pins bit 2
|
|
.equ PINC3 = 3 ; Port C Input Pins bit 3
|
|
.equ PINC4 = 4 ; Port C Input Pins bit 4
|
|
.equ PINC5 = 5 ; Port C Input Pins bit 5
|
|
.equ PINC6 = 6 ; Port C Input Pins bit 6
|
|
.equ PINC7 = 7 ; Port C Input Pins bit 7
|
|
|
|
|
|
; ***** PORTD ************************
|
|
; PORTD - Port D Data Register
|
|
.equ PORTD0 = 0 ; Port D Data Register bit 0
|
|
.equ PD0 = 0 ; For compatibility
|
|
.equ PORTD1 = 1 ; Port D Data Register bit 1
|
|
.equ PD1 = 1 ; For compatibility
|
|
.equ PORTD2 = 2 ; Port D Data Register bit 2
|
|
.equ PD2 = 2 ; For compatibility
|
|
.equ PORTD3 = 3 ; Port D Data Register bit 3
|
|
.equ PD3 = 3 ; For compatibility
|
|
.equ PORTD4 = 4 ; Port D Data Register bit 4
|
|
.equ PD4 = 4 ; For compatibility
|
|
.equ PORTD5 = 5 ; Port D Data Register bit 5
|
|
.equ PD5 = 5 ; For compatibility
|
|
.equ PORTD6 = 6 ; Port D Data Register bit 6
|
|
.equ PD6 = 6 ; For compatibility
|
|
.equ PORTD7 = 7 ; Port D Data Register bit 7
|
|
.equ PD7 = 7 ; For compatibility
|
|
|
|
; DDRD - Port D Data Direction Register
|
|
.equ DDD0 = 0 ; Port D Data Direction Register bit 0
|
|
.equ DDD1 = 1 ; Port D Data Direction Register bit 1
|
|
.equ DDD2 = 2 ; Port D Data Direction Register bit 2
|
|
.equ DDD3 = 3 ; Port D Data Direction Register bit 3
|
|
.equ DDD4 = 4 ; Port D Data Direction Register bit 4
|
|
.equ DDD5 = 5 ; Port D Data Direction Register bit 5
|
|
.equ DDD6 = 6 ; Port D Data Direction Register bit 6
|
|
.equ DDD7 = 7 ; Port D Data Direction Register bit 7
|
|
|
|
; PIND - Port D Input Pins
|
|
.equ PIND0 = 0 ; Port D Input Pins bit 0
|
|
.equ PIND1 = 1 ; Port D Input Pins bit 1
|
|
.equ PIND2 = 2 ; Port D Input Pins bit 2
|
|
.equ PIND3 = 3 ; Port D Input Pins bit 3
|
|
.equ PIND4 = 4 ; Port D Input Pins bit 4
|
|
.equ PIND5 = 5 ; Port D Input Pins bit 5
|
|
.equ PIND6 = 6 ; Port D Input Pins bit 6
|
|
.equ PIND7 = 7 ; Port D Input Pins bit 7
|
|
|
|
|
|
; ***** TIMER_COUNTER_0 **************
|
|
; TCCR0 - Timer/Counter 0 Control Register
|
|
.equ CS00 = 0 ; Clock Select 1
|
|
.equ CS01 = 1 ; Clock Select 1
|
|
.equ CS02 = 2 ; Clock Select 2
|
|
.equ WGM01 = 3 ; Waveform Generation Mode 1
|
|
.equ CTC0 = WGM01 ; For compatibility
|
|
.equ COM00 = 4 ; Compare match Output Mode 0
|
|
.equ COM01 = 5 ; Compare Match Output Mode 1
|
|
.equ WGM00 = 6 ; Waveform Generation Mode 0
|
|
.equ PWM0 = WGM00 ; For compatibility
|
|
.equ FOC0 = 7 ; Force Output Compare
|
|
|
|
; TCNT0 - Timer/Counter 0 Register
|
|
.equ TCNT0_0 = 0 ;
|
|
.equ TCNT0_1 = 1 ;
|
|
.equ TCNT0_2 = 2 ;
|
|
.equ TCNT0_3 = 3 ;
|
|
.equ TCNT0_4 = 4 ;
|
|
.equ TCNT0_5 = 5 ;
|
|
.equ TCNT0_6 = 6 ;
|
|
.equ TCNT0_7 = 7 ;
|
|
|
|
; OCR0 - Timer/Counter 0 Output Compare Register
|
|
.equ OCR0_0 = 0 ;
|
|
.equ OCR0_1 = 1 ;
|
|
.equ OCR0_2 = 2 ;
|
|
.equ OCR0_3 = 3 ;
|
|
.equ OCR0_4 = 4 ;
|
|
.equ OCR0_5 = 5 ;
|
|
.equ OCR0_6 = 6 ;
|
|
.equ OCR0_7 = 7 ;
|
|
|
|
; TIMSK - Timer/Counter Interrupt Mask Register
|
|
.equ OCIE0 = 0 ; Timer/Counter0 Output Compare Match Interrupt register
|
|
.equ TOIE0 = 1 ; Timer/Counter0 Overflow Interrupt Enable
|
|
|
|
; TIFR - Timer/Counter Interrupt Flag register
|
|
.equ OCF0 = 0 ; Output Compare Flag 0
|
|
.equ TOV0 = 1 ; Timer/Counter0 Overflow Flag
|
|
|
|
|
|
; ***** WATCHDOG *********************
|
|
; WDTCR - Watchdog Timer Control Register
|
|
.equ WDTCSR = WDTCR ; For compatibility
|
|
.equ WDP0 = 0 ; Watch Dog Timer Prescaler bit 0
|
|
.equ WDP1 = 1 ; Watch Dog Timer Prescaler bit 1
|
|
.equ WDP2 = 2 ; Watch Dog Timer Prescaler bit 2
|
|
.equ WDE = 3 ; Watch Dog Enable
|
|
.equ WDCE = 4 ; Watchdog Change Enable
|
|
.equ WDTOE = WDCE ; For compatibility
|
|
|
|
|
|
; ***** PORTE ************************
|
|
; PORTE - Data Register, Port E
|
|
.equ PORTE0 = 0 ;
|
|
.equ PE0 = 0 ; For compatibility
|
|
.equ PORTE1 = 1 ;
|
|
.equ PE1 = 1 ; For compatibility
|
|
.equ PORTE2 = 2 ;
|
|
.equ PE2 = 2 ; For compatibility
|
|
|
|
; DDRE
|
|
.equ DDE0 = 0 ;
|
|
.equ DDE1 = 1 ;
|
|
.equ DDE2 = 2 ;
|
|
|
|
; PINE - Input Pins, Port E
|
|
.equ PINE0 = 0 ;
|
|
.equ PINE1 = 1 ;
|
|
.equ PINE2 = 2 ;
|
|
.equ PINE3 = 3 ;
|
|
|
|
|
|
; ***** EXTERNAL_INTERRUPT ***********
|
|
; MCUCR - MCU Control Register
|
|
;.equ ISC00 = 0 ; Interrupt Sense Control 0 Bit 0
|
|
;.equ ISC01 = 1 ; Interrupt Sense Control 0 Bit 1
|
|
;.equ ISC10 = 2 ; Interrupt Sense Control 1 Bit 0
|
|
;.equ ISC11 = 3 ; Interrupt Sense Control 1 Bit 1
|
|
|
|
; EMCUCR - Extended MCU Control Register
|
|
;.equ ISC2 = 0 ; Interrupt Sense Control 2
|
|
|
|
; GICR - General Interrupt Control Register
|
|
.equ EIMSK = GICR ; For compatibility
|
|
.equ GIMSK = GICR ; For compatibility
|
|
.equ IVCE = 0 ; Interrupt Vector Change Enable
|
|
.equ IVSEL = 1 ; Interrupt Vector Select
|
|
.equ PCIE0 = 3 ; Pin Change Interrupt Enable 0
|
|
.equ PCIE1 = 4 ; Pin Change Interrupt Enable 1
|
|
.equ INT2 = 5 ; External Interrupt Request 2 Enable
|
|
.equ INT0 = 6 ; External Interrupt Request 0 Enable
|
|
.equ INT1 = 7 ; External Interrupt Request 1 Enable
|
|
|
|
; GIFR - General Interrupt Flag Register
|
|
.equ PCIF0 = 3 ; Pin Change Interrupt Flag 0
|
|
.equ PCIF1 = 4 ; Pin Change Interrupt Flag 1
|
|
.equ INTF2 = 5 ; External Interrupt Flag 2
|
|
.equ INTF0 = 6 ; External Interrupt Flag 0
|
|
.equ INTF1 = 7 ; External Interrupt Flag 1
|
|
|
|
; PCMSK1 - Pin Change Mask Register 1
|
|
.equ PCINT8 = 0 ; Pin Change Enable Mask 8
|
|
.equ PCINT9 = 1 ; Pin Change Enable Mask 9
|
|
.equ PCINT10 = 2 ; Pin Change Enable Mask 10
|
|
.equ PCINT11 = 3 ; Pin Change Enable Mask 11
|
|
.equ PCINT12 = 4 ; Pin Change Enable Mask 12
|
|
.equ PCINT13 = 5 ; Pin Change Enable Mask 13
|
|
.equ PCINT14 = 6 ; Pin Change Enable Mask 14
|
|
.equ PCINT15 = 7 ; Pin Change Enable Mask 15
|
|
|
|
; PCMSK0 - Pin Change Enable Mask
|
|
.equ PCINT0 = 0 ; Pin Change Enable Mask 0
|
|
.equ PCINT1 = 1 ; Pin Change Enable Mask 1
|
|
.equ PCINT2 = 2 ; Pin Change Enable Mask 2
|
|
.equ PCINT3 = 3 ; Pin Change Enable Mask 3
|
|
.equ PCINT4 = 4 ; Pin Change Enable Mask 4
|
|
.equ PCINT5 = 5 ; Pin Change Enable Mask 5
|
|
.equ PCINT6 = 6 ; Pin Change Enable Mask 6
|
|
.equ PCINT7 = 7 ; Pin Change Enable Mask 7
|
|
|
|
|
|
|
|
; ***** LOCKSBITS ********************************************************
|
|
.equ LB1 = 0 ; Lock bit
|
|
.equ LB2 = 1 ; Lock bit
|
|
.equ BLB01 = 2 ; Boot Lock bit
|
|
.equ BLB02 = 3 ; Boot Lock bit
|
|
.equ BLB11 = 4 ; Boot lock bit
|
|
.equ BLB12 = 5 ; Boot lock bit
|
|
|
|
|
|
; ***** FUSES ************************************************************
|
|
; LOW fuse bits
|
|
.equ CKSEL0 = 0 ; Select Clock Source
|
|
.equ CKSEL1 = 1 ; Select Clock Source
|
|
.equ CKSEL2 = 2 ; Select Clock Source
|
|
.equ CKSEL3 = 3 ; Select Clock Source
|
|
.equ SUT0 = 4 ; Select start-up time
|
|
.equ SUT1 = 5 ; Select start-up time
|
|
.equ CKOUT = 6 ; Oscillator options
|
|
.equ CLKDIV8 = 7 ; Divide clock by 8
|
|
|
|
; HIGH fuse bits
|
|
.equ BOOTRST = 0 ; Select Reset Vector
|
|
.equ BOOTSZ0 = 1 ; Select Boot Size
|
|
.equ BOOTSZ1 = 2 ; Select Boot Size
|
|
.equ EESAVE = 3 ; EEPROM memory is preserved through chip erase
|
|
.equ WDTON = 4 ; Watchdog timer always on
|
|
.equ SPIEN = 5 ; Enable Serial programming and Data Downloading
|
|
.equ JTAGEN = 6 ; Enable JTAG
|
|
.equ OCDEN = 7 ; Enable OCD
|
|
|
|
; EXTENDED fuse bits
|
|
.equ BODLEVEL0 = 1 ; Brown out detector trigger level
|
|
.equ BODLEVEL1 = 2 ; Brown out detector trigger level
|
|
.equ BODLEVEL2 = 3 ; Brown out detector trigger level
|
|
.equ M161C = 4 ; ATMega 161 compatibility mode
|
|
|
|
|
|
|
|
; ***** CPU REGISTER DEFINITIONS *****************************************
|
|
.def XH = r27
|
|
.def XL = r26
|
|
.def YH = r29
|
|
.def YL = r28
|
|
.def ZH = r31
|
|
.def ZL = r30
|
|
|
|
|
|
|
|
; ***** DATA MEMORY DECLARATIONS *****************************************
|
|
.equ FLASHEND = 0x1fff ; Note: Word address
|
|
.equ IOEND = 0x00ff
|
|
.equ SRAM_START = 0x0100
|
|
.equ SRAM_SIZE = 1024
|
|
.equ RAMEND = 0x04ff
|
|
.equ XRAMEND = 0xffff
|
|
.equ E2END = 0x01ff
|
|
.equ EEPROMEND = 0x01ff
|
|
.equ EEADRBITS = 9
|
|
#pragma AVRPART MEMORY PROG_FLASH 16384
|
|
#pragma AVRPART MEMORY EEPROM 512
|
|
#pragma AVRPART MEMORY INT_SRAM SIZE 1024
|
|
#pragma AVRPART MEMORY INT_SRAM START_ADDR 0x100
|
|
|
|
|
|
|
|
; ***** BOOTLOADER DECLARATIONS ******************************************
|
|
.equ NRWW_START_ADDR = 0x1c00
|
|
.equ NRWW_STOP_ADDR = 0x1fff
|
|
.equ RWW_START_ADDR = 0x0
|
|
.equ RWW_STOP_ADDR = 0x1bff
|
|
.equ PAGESIZE = 64
|
|
.equ FIRSTBOOTSTART = 0x1f80
|
|
.equ SECONDBOOTSTART = 0x1f00
|
|
.equ THIRDBOOTSTART = 0x1e00
|
|
.equ FOURTHBOOTSTART = 0x1c00
|
|
.equ SMALLBOOTSTART = FIRSTBOOTSTART
|
|
.equ LARGEBOOTSTART = FOURTHBOOTSTART
|
|
|
|
|
|
|
|
; ***** INTERRUPT VECTORS ************************************************
|
|
.equ INT0addr = 0x0002 ; External Interrupt Request 0
|
|
.equ INT1addr = 0x0004 ; External Interrupt Request 1
|
|
.equ INT2addr = 0x0006 ; External Interrupt Request 2
|
|
.equ PCI0addr = 0x0008 ; Pin Change Interrupt Request 0
|
|
.equ PCI1addr = 0x000a ; Pin Change Interrupt Request 1
|
|
.equ ICP3addr = 0x000c ; Timer/Counter3 Capture Event
|
|
.equ OC3Aaddr = 0x000e ; Timer/Counter3 Compare Match A
|
|
.equ OC3Baddr = 0x0010 ; Timer/Counter3 Compare Match B
|
|
.equ OVF3addr = 0x0012 ; Timer/Counter3 Overflow
|
|
.equ OC2addr = 0x0014 ; Timer/Counter2 Compare Match
|
|
.equ OVF2addr = 0x0016 ; Timer/Counter2 Overflow
|
|
.equ ICP1addr = 0x0018 ; Timer/Counter1 Capture Event
|
|
.equ OC1Aaddr = 0x001a ; Timer/Counter1 Compare Match A
|
|
.equ OC1Baddr = 0x001c ; Timer/Counter Compare Match B
|
|
.equ OVF1addr = 0x001e ; Timer/Counter1 Overflow
|
|
.equ OC0addr = 0x0020 ; Timer/Counter0 Compare Match
|
|
.equ OVF0addr = 0x0022 ; Timer/Counter0 Overflow
|
|
.equ SPIaddr = 0x0024 ; SPI Serial Transfer Complete
|
|
.equ URXC0addr = 0x0026 ; USART0, Rx Complete
|
|
.equ URXC1addr = 0x0028 ; USART1, Rx Complete
|
|
.equ UDRE0addr = 0x002a ; USART0 Data register Empty
|
|
.equ UDRE1addr = 0x002c ; USART1, Data register Empty
|
|
.equ UTXC0addr = 0x002e ; USART0, Tx Complete
|
|
.equ UTXC1addr = 0x0030 ; USART1, Tx Complete
|
|
.equ ERDYaddr = 0x0032 ; EEPROM Ready
|
|
.equ ACIaddr = 0x0034 ; Analog Comparator
|
|
.equ SPMRaddr = 0x0036 ; Store Program Memory Read
|
|
|
|
.equ INT_VECTORS_SIZE = 56 ; size in words
|
|
|
|
#endif /* _M162DEF_INC_ */
|
|
|
|
; ***** END OF FILE ******************************************************
|