KolibriOS/kolibrios
12
4
Fork 11
Code Issues 78 Pull Requests 5 Projects Releases Activity
975284f5f3
kolibrios/drivers/ethernet/mtd80x.asm
Andrew Dent c7231e7d53 Fix EN typos 
- Corrections for en_US language.
- Some whitespace sanitation.

git-svn-id: svn://kolibrios.org@10065 a494cfbc-eb01-0410-851d-a64ba20cac60
2024-05-29 23:50:06 +00:00

1197 lines
37 KiB
NASM
Raw Blame History

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2004-2024. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;; MTD80x driver for KolibriOS ;;
;; ;;
;; Based on mtd80x.c from the etherboot project ;;
;; ;;
;; Written by hidnplayr@kolibrios.org ;;
;; ;;
;; GNU GENERAL PUBLIC LICENSE ;;
;; Version 2, June 1991 ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
format PE DLL native
entry START
CURRENT_API = 0x0200
COMPATIBLE_API = 0x0100
API_VERSION = (COMPATIBLE_API shl 16) + CURRENT_API
MAX_DEVICES = 16
__DEBUG__ = 1
__DEBUG_LEVEL__ = 2
NUM_TX_DESC = 6
NUM_RX_DESC = 12
section '.flat' readable writable executable
include '../proc32.inc'
include '../struct.inc'
include '../macros.inc'
include '../fdo.inc'
include '../netdrv.inc'
; for different PHY
MysonPHY = 1
AhdocPHY = 2
SeeqPHY = 3
MarvellPHY = 4
Myson981 = 5
LevelOnePHY = 6
OtherPHY = 10
; Offsets to the Command and Status Registers.
PAR0 = 0x0 ; physical address 0-3
PAR1 = 0x04 ; physical address 4-5
MAR0 = 0x08 ; multicast address 0-3
MAR1 = 0x0C ; multicast address 4-7
FAR0 = 0x10 ; flow-control address 0-3
FAR1 = 0x14 ; flow-control address 4-5
TCRRCR = 0x18 ; receive & transmit configuration
BCR = 0x1C ; bus command
TXPDR = 0x20 ; transmit polling demand
RXPDR = 0x24 ; receive polling demand
RXCWP = 0x28 ; receive current word pointer
TXLBA = 0x2C ; transmit list base address
RXLBA = 0x30 ; receive list base address
ISR = 0x34 ; interrupt status
IMR = 0x38 ; interrupt mask
FTH = 0x3C ; flow control high/low threshold
MANAGEMENT = 0x40 ; bootrom/eeprom and mii management
TALLY = 0x44 ; tally counters for crc and mpa
TSR = 0x48 ; tally counter for transmit status
BMCRSR = 0x4c ; basic mode control and status
PHYIDENTIFIER = 0x50 ; phy identifier
ANARANLPAR = 0x54 ; auto-negotiation advertisement and link partner ability
ANEROCR = 0x58 ; auto-negotiation expansion and pci conf.
BPREMRPSR = 0x5c ; bypass & receive error mask and phy status
; Bits in the interrupt status/enable registers.
RFCON = 0x00020000 ; receive flow control xon packet
RFCOFF = 0x00010000 ; receive flow control xoff packet
LSCStatus = 0x00008000 ; link status change
ANCStatus = 0x00004000 ; autonegotiation completed
FBE = 0x00002000 ; fatal bus error
FBEMask = 0x00001800 ; mask bit12-11
ParityErr = 0x00000000 ; parity error
TargetErr = 0x00001000 ; target abort
MasterErr = 0x00000800 ; master error
TUNF = 0x00000400 ; transmit underflow
ROVF = 0x00000200 ; receive overflow
ETI = 0x00000100 ; transmit early int
ERI = 0x00000080 ; receive early int
CNTOVF = 0x00000040 ; counter overflow
RBU = 0x00000020 ; receive buffer unavailable
TBU = 0x00000010 ; transmit buffer unavilable
TI = 0x00000008 ; transmit interrupt
RI = 0x00000004 ; receive interrupt
RxErr = 0x00000002 ; receive error
; Bits in the NetworkConfig register.
RxModeMask = 0xe0
AcceptAllPhys = 0x80 ; promiscuous mode
AcceptBroadcast = 0x40 ; accept broadcast
AcceptMulticast = 0x20 ; accept mutlicast
AcceptRunt = 0x08 ; receive runt pkt
ALP = 0x04 ; receive long pkt
AcceptErr = 0x02 ; receive error pkt
AcceptMyPhys = 0x00000000
RxEnable = 0x00000001
RxFlowCtrl = 0x00002000
TxEnable = 0x00040000
TxModeFDX = 0x00100000
TxThreshold = 0x00e00000
PS1000 = 0x00010000
PS10 = 0x00080000
FD = 0x00100000
; Bits in network_desc.status
RXOWN = 0x80000000 ; own bit
FLNGMASK = 0x0fff0000 ; frame length
FLNGShift = 16
MARSTATUS = 0x00004000 ; multicast address received
BARSTATUS = 0x00002000 ; broadcast address received
PHYSTATUS = 0x00001000 ; physical address received
RXFSD = 0x00000800 ; first descriptor
RXLSD = 0x00000400 ; last descriptor
ErrorSummary = 0x80 ; error summary
RUNT = 0x40 ; runt packet received
LONG = 0x20 ; long packet received
FAE = 0x10 ; frame align error
CRC = 0x08 ; crc error
RXER = 0x04 ; receive error
; rx_desc_control_bits
RXIC = 0x00800000 ; interrupt control
RBSShift = 0
; tx_desc_status_bits
TXOWN = 0x80000000 ; own bit
JABTO = 0x00004000 ; jabber timeout
CSL = 0x00002000 ; carrier sense lost
LC = 0x00001000 ; late collision
EC = 0x00000800 ; excessive collision
UDF = 0x00000400 ; fifo underflow
DFR = 0x00000200 ; deferred
HF = 0x00000100 ; heartbeat fail
NCRMask = 0x000000ff ; collision retry count
NCRShift = 0
; tx_desc_control_bits
TXIC = 0x80000000 ; interrupt control
ETIControl = 0x40000000 ; early transmit interrupt
TXLD = 0x20000000 ; last descriptor
TXFD = 0x10000000 ; first descriptor
CRCEnable = 0x08000000 ; crc control
PADEnable = 0x04000000 ; padding control
RetryTxLC = 0x02000000 ; retry late collision
PKTSMask = 0x3ff800 ; packet size bit21-11
PKTSShift = 11
TBSMask = 0x000007ff ; transmit buffer bit 10-0
TBSShift = 0
; BootROM/EEPROM/MII Management Register
MASK_MIIR_MII_READ = 0x00000000
MASK_MIIR_MII_WRITE = 0x00000008
MASK_MIIR_MII_MDO = 0x00000004
MASK_MIIR_MII_MDI = 0x00000002
MASK_MIIR_MII_MDC = 0x00000001
; ST+OP+PHYAD+REGAD+TA
OP_READ = 0x6000 ; ST:01+OP:10+PHYAD+REGAD+TA:Z0
OP_WRITE = 0x5002 ; ST:01+OP:01+PHYAD+REGAD+TA:10
; -------------------------------------------------------------------------
; Constants for Myson PHY
; -------------------------------------------------------------------------
MysonPHYID = 0xd0000302
MysonPHYID0 = 0x0302
StatusRegister = 18
SPEED100 = 0x0400 ; bit10
FULLMODE = 0x0800 ; bit11
; -------------------------------------------------------------------------
; Constants for Seeq 80225 PHY
; -------------------------------------------------------------------------
SeeqPHYID0 = 0x0016
MIIRegister18 = 18
SPD_DET_100 = 0x80
DPLX_DET_FULL = 0x40
; -------------------------------------------------------------------------
; Constants for Ahdoc 101 PHY
; -------------------------------------------------------------------------
AhdocPHYID0 = 0x0022
DiagnosticReg = 18
DPLX_FULL = 0x0800
Speed_100 = 0x0400
; --------------------------------------------------------------------------
; Constants
; --------------------------------------------------------------------------
MarvellPHYID0 = 0x0141
LevelOnePHYID0 = 0x0013
MII1000BaseTControlReg = 9
MII1000BaseTStatusReg = 10
SpecificReg = 17
; for 1000BaseT Control Register
PHYAbletoPerform1000FullDuplex = 0x0200
PHYAbletoPerform1000HalfDuplex = 0x0100
PHY1000AbilityMask = 0x300
; for phy specific status register, marvell phy.
SpeedMask = 0x0c000
Speed_1000M = 0x08000
Speed_100M = 0x4000
Speed_10M = 0
Full_Duplex = 0x2000
; for phy specific status register, levelone phy
LXT1000_100M = 0x08000
LXT1000_1000M = 0x0c000
LXT1000_Full = 0x200
; for PHY
LinkIsUp = 0x0004
LinkIsUp2 = 0x00040000
struct descriptor
status dd ?
control dd ?
buffer dd ?
next_desc dd ?
next_desc_logical dd ?
skbuff dd ?
reserved1 dd ?
reserved2 dd ?
ends
struct device ETH_DEVICE
io_addr dd ?
pci_bus dd ?
pci_dev dd ?
irq_line db ?
dev_id dw ?
flags dd ?
crvalue dd ?
bcrvalue dd ?
cur_rx dd ?
cur_tx dd ?
default_port dd ?
PHYType dd ?
; MII transceiver section.
mii_cnt dd ? ; MII device addresses.
phys db ? ; MII device addresses.
; descriptors
rb 0x100 - ($ and 0xff) ; align 256
tx_desc rb NUM_TX_DESC*sizeof.descriptor
rx_desc rb NUM_RX_DESC*sizeof.descriptor
ends
;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; proc START ;;
;; ;;
;; (standard driver proc) ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;
proc START c, reason:dword, cmdline:dword
cmp [reason], DRV_ENTRY
jne .fail
DEBUGF 1,"Loading driver\n"
invoke RegService, my_service, service_proc
ret
.fail:
xor eax, eax
ret
endp
;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; proc SERVICE_PROC ;;
;; ;;
;; (standard driver proc) ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;
proc service_proc stdcall, ioctl:dword
mov edx, [ioctl]
mov eax, [edx + IOCTL.io_code]
;------------------------------------------------------
cmp eax, 0 ;SRV_GETVERSION
jne @F
cmp [edx + IOCTL.out_size], 4
jb .fail
mov eax, [edx + IOCTL.output]
mov [eax], dword API_VERSION
xor eax, eax
ret
;------------------------------------------------------
@@:
cmp eax, 1 ;SRV_HOOK
jne .fail
cmp [edx + IOCTL.inp_size], 3 ; Data input must be at least 3 bytes
jb .fail
mov eax, [edx + IOCTL.input]
cmp byte [eax], 1 ; 1 means device number and bus number (pci) are given
jne .fail ; other types aren't supported for this card yet
; check if the device is already listed
mov esi, device_list
mov ecx, [devices]
test ecx, ecx
jz .firstdevice
; mov eax, [edx + IOCTL.input] ; get the pci bus and device numbers
mov ax, [eax+1] ;
.nextdevice:
mov ebx, [esi]
cmp al, byte[ebx + device.pci_bus]
jne @f
cmp ah, byte[ebx + device.pci_dev]
je .find_devicenum ; Device is already loaded, let's find its device number
@@:
add esi, 4
loop .nextdevice
; This device doesn't have its own eth_device structure yet, let's create one
.firstdevice:
cmp [devices], MAX_DEVICES ; First check if the driver can handle one more card
jae .fail
allocate_and_clear ebx, sizeof.device, .fail
; Fill in the direct call addresses into the struct
mov [ebx + device.reset], reset
mov [ebx + device.transmit], transmit
mov [ebx + device.unload], unload
mov [ebx + device.name], my_service
; save the pci bus and device numbers
mov eax, [edx + IOCTL.input]
movzx ecx, byte[eax+1]
mov [ebx + device.pci_bus], ecx
movzx ecx, byte[eax+2]
mov [ebx + device.pci_dev], ecx
; Now, it's time to find the base io address of the PCI device
stdcall PCI_find_io, [ebx + device.pci_bus], [ebx + device.pci_dev]
mov [ebx + device.io_addr], eax
; We've found the io address, find IRQ now
invoke PciRead8, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.interrupt_line
mov [ebx + device.irq_line], al
DEBUGF 1,"Hooking into device, dev:%x, bus:%x, irq:%x, addr:%x\n",\
[ebx + device.pci_dev]:1,[ebx + device.pci_bus]:1,[ebx + device.irq_line]:1,[ebx + device.io_addr]:8
; Ok, the eth_device structure is ready, let's probe the device
; Because initialization fires IRQ, IRQ handler must be aware of this device
mov eax, [devices] ; Add the device structure to our device list
mov [device_list+4*eax], ebx ; (IRQ handler uses this list to find device)
inc [devices] ;
call probe ; this function will output in eax
test eax, eax
jnz .err2 ; If an error occured, exit
mov [ebx + device.type], NET_TYPE_ETH
invoke NetRegDev
cmp eax, -1
je .destroy
ret
; If the device was already loaded, find the device number and return it in eax
.find_devicenum:
DEBUGF 2,"Trying to find device number of already registered device\n"
invoke NetPtrToNum ; This kernel procedure converts a pointer to device struct in ebx
; into a device number in edi
mov eax, edi ; Application wants it in eax instead
DEBUGF 2,"Kernel says: %u\n", eax
ret
; If an error occured, remove all allocated data and exit (returning -1 in eax)
.destroy:
; todo: reset device into virgin state
.err2:
dec [devices]
.err:
DEBUGF 2,"removing device structure\n"
invoke KernelFree, ebx
.fail:
or eax, -1
ret
;------------------------------------------------------
endp
;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;;
;; ;;
;; Actual Hardware dependent code starts here ;;
;; ;;
;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;;
align 4
unload:
; TODO: (in this particular order)
;
; - Stop the device
; /* Disable Tx Rx*/
; outl( mtdx.crvalue & (~TxEnable) & (~RxEnable), mtdx.ioaddr + TCRRCR );
;
; /* Reset the chip to erase previous misconfiguration. */
; mtd_reset(nic);
; - Detach int handler
; - Remove device from local list (device_list)
; - call unregister function in kernel
; - Remove all allocated structures and buffers the card used
or eax, -1
ret
;-------
;
; PROBE
;
;-------
align 4
probe:
DEBUGF 1,"Probing\n"
; Make the device a bus master
invoke PciRead32, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.command
or al, PCI_CMD_MASTER
invoke PciWrite32, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.command, eax
; Check vendor/device id's
invoke PciRead32, [ebx + device.pci_bus], [ebx + device.pci_dev], 0
cmp ax, 0x1516
jne .notfound
shr eax, 16
mov [ebx + device.dev_id], ax
cmp ax, 0x0800
je .mtd800
cmp ax, 0x0803
je .mtd803
cmp ax, 0x0891
je .mtd891
.notfound:
DEBUGF 2,"Device not supported!\n"
xor eax, eax
dec eax
ret
.mtd803:
mov [ebx + device.name], sz_mtd803
DEBUGF 1,"Device has chip xcvr\n"
jmp .xcvr_set
.mtd800:
DEBUGF 1,"Device has mii xcvr\n"
mov [ebx + device.name], sz_mtd800
jmp .xcvr_set
.mtd891:
DEBUGF 1,"Device has mii xcvr\n"
mov [ebx + device.name], sz_mtd800
.xcvr_set:
call read_mac
; Reset the chip to erase previous misconfiguration.
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], BCR
xor eax, eax
inc eax
out dx, eax
; find the connected MII xcvrs
cmp [ebx + device.dev_id], 0x0803
je .is_803
; int phy, phy_idx = 0;
;
; for (phy = 1; phy < 32 && phy_idx < 1; phy++) {
; int mii_status = mdio_read(nic, phy, 1);
;
; if (mii_status != 0xffff && mii_status != 0x0000) {
; mtdx.phys[phy_idx] = phy;
;
; DBG ( "%s: MII PHY found at address %d, status "
; "0x%4.4x.\n", mtdx.nic_name, phy, mii_status );
; /* get phy type */
; {
; unsigned int data;
;
; data = mdio_read(nic, mtdx.phys[phy_idx], 2);
; if (data equ= SeeqPHYID0)
; mtdx.PHYType = SeeqPHY;
; else if (data equ= AhdocPHYID0)
; mtdx.PHYType = AhdocPHY;
; else if (data equ= MarvellPHYID0)
; mtdx.PHYType = MarvellPHY;
; else if (data equ= MysonPHYID0)
; mtdx.PHYType = Myson981;
; else if (data equ= LevelOnePHYID0)
; mtdx.PHYType = LevelOnePHY;
; else
; mtdx.PHYType = OtherPHY;
; }
; phy_idx++;
; }
; }
;
; mtdx.mii_cnt = phy_idx;
; if (phy_idx equ= 0) {
; printf("%s: MII PHY not found -- this device may "
; "not operate correctly.\n", mtdx.nic_name);
; }
jmp .no_803
.is_803:
mov [ebx + device.phys], 32
; get phy type
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], PHYIDENTIFIER
in eax, dx
cmp eax, MysonPHYID
jne @f
mov [ebx + device.PHYType], MysonPHY
DEBUGF 1,"Myson PHY\n"
jmp .no_803
@@:
mov [ebx + device.PHYType], OtherPHY
DEBUGF 1,"Other PHY\n"
.no_803:
;-------
;
; RESET
;
;-------
align 4
reset:
DEBUGF 1,"Resetting\n"
; attach irq handler
movzx eax, [ebx + device.irq_line]
DEBUGF 1,"Attaching int handler to irq %x\n", eax:1
invoke AttachIntHandler, eax, int_handler, ebx
test eax, eax
jnz @f
DEBUGF 2,"Could not attach int handler!\n"
or eax, -1
ret
@@:
; Reset the chip to erase previous misconfiguration.
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], BCR
xor eax, eax
inc eax
out dx, eax
call init_ring
test eax, eax
jnz .err
; Initialize other registers.
; Configure the PCI bus bursts and FIFO thresholds.
mov [ebx + device.bcrvalue], 0x10 ; little-endian, 8 burst length
mov [ebx + device.crvalue], 0xa00 ; 128 burst length
cmp [ebx + device.dev_id], 0x891
jne @f
or [ebx + device.bcrvalue], 0x200 ; set PROG bit
or [ebx + device.crvalue], 0x02000000 ; set enhanced bit
@@:
or [ebx + device.crvalue], RxEnable + TxThreshold + TxEnable
call set_rx_mode
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], BCR
mov eax, [ebx + device.bcrvalue]
out dx, eax
set_io [ebx + device.io_addr], TCRRCR
mov eax, [ebx + device.crvalue]
out dx, eax
call getlinkstatus
; Restart Rx engine if stopped.
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], RXPDR
xor eax, eax
out dx, eax
; Enable interrupts
set_io [ebx + device.io_addr], ISR
mov eax, FBE or TUNF or CNTOVF or RBU or TI or RI
out dx, eax
set_io [ebx + device.io_addr], IMR
out dx, eax
; clear packet/byte counters
xor eax, eax
lea edi, [ebx + device.bytes_tx]
mov ecx, 6
rep stosd
mov [ebx + device.mtu], 1514
xor eax, eax
ret
.err:
DEBUGF 2, "Error!\n"
or eax, -1
ret
align 4
init_ring:
DEBUGF 1, "initializing rx and tx ring\n"
; Initialize all Rx descriptors
lea esi, [ebx + device.rx_desc]
mov [ebx + device.cur_rx], esi
mov ecx, NUM_RX_DESC
.rx_desc_loop:
mov [esi + descriptor.status], RXOWN
mov [esi + descriptor.control], 1514 shl RBSShift
lea eax, [esi + sizeof.descriptor]
mov [esi + descriptor.next_desc_logical], eax
push ecx esi
invoke GetPhysAddr
mov [esi + descriptor.next_desc], eax
invoke NetAlloc, 1514+NET_BUFF.data
pop esi ecx
test eax, eax
jz .out_of_mem
push ecx esi
mov [esi + descriptor.skbuff], eax
invoke GetPgAddr
add eax, NET_BUFF.data
pop esi ecx
mov [esi + descriptor.buffer], eax
add esi, sizeof.descriptor
loop .rx_desc_loop
; Mark the last entry as wrapping the ring.
lea eax, [ebx + device.rx_desc]
mov [esi - sizeof.descriptor + descriptor.next_desc_logical], eax
push esi
invoke GetPhysAddr
pop esi
mov [esi - sizeof.descriptor + descriptor.next_desc], eax
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], RXLBA
out dx, eax
; Initialize all Tx descriptors
lea esi, [ebx + device.tx_desc]
mov [ebx + device.cur_tx], esi
mov ecx, NUM_TX_DESC
.tx_desc_loop:
mov [esi + descriptor.status], 0
lea eax, [esi + sizeof.descriptor]
mov [esi + descriptor.next_desc_logical], eax
push ecx esi
invoke GetPhysAddr
pop esi ecx
mov [esi + descriptor.next_desc], eax
mov [esi + descriptor.skbuff], 0
add esi, sizeof.descriptor
loop .tx_desc_loop
; Mark the last entry as wrapping the ring.
lea eax, [ebx + device.tx_desc]
mov [esi - sizeof.descriptor + descriptor.next_desc_logical], eax
push esi
invoke GetPhysAddr
pop esi
mov [esi - sizeof.descriptor + descriptor.next_desc], eax
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], TXLBA
out dx, eax
xor eax, eax
ret
.out_of_mem:
or eax, -1
ret
align 4
set_rx_mode:
DEBUGF 1,"Setting RX mode\n"
; Too many to match, or accept all multicasts.
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], MAR0
xor eax, eax
not eax
out dx, eax
set_io [ebx + device.io_addr], MAR1
out dx, eax
and [ebx + device.crvalue], not (RxModeMask)
or [ebx + device.crvalue], AcceptBroadcast + AcceptMulticast + AcceptMyPhys
ret
align 4
getlinkstatus:
DEBUGF 1,"Getting link status\n"
mov [ebx + device.state], ETH_LINK_DOWN ; assume link is dead
cmp [ebx + device.PHYType], MysonPHY
jne .no_myson_phy
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], BMCRSR
in eax, dx
test eax, LinkIsUp2
jnz getlinktype
ret
.no_myson_phy:
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], BMCRSR
in eax, dx
test eax, LinkIsUp
jnz getlinktype
ret
getlinktype:
DEBUGF 1,"Getting link type\n"
cmp [ebx + device.PHYType], MysonPHY
jne .no_myson_phy
DEBUGF 1,"myson PHY\n"
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], TCRRCR
in eax, dx
test eax, FD
jz @f
DEBUGF 1,"full duplex\n"
or [ebx + device.state], ETH_LINK_FULL_DUPLEX
@@:
test eax, PS10
jnz @f
DEBUGF 1,"100Mbit\n"
or [ebx + device.state], ETH_LINK_SPEED_100M
ret
@@:
DEBUGF 1,"10Mbit\n"
or [ebx + device.state], ETH_LINK_SPEED_10M
ret
.no_myson_phy:
DEBUGF 1,"not a myson PHY\n"
mov [ebx + device.state], ETH_LINK_UNKNOWN
; if (mtdx.PHYType equ= SeeqPHY) { /* this PHY is SEEQ 80225 */
; unsigned int data;
;
; data = mdio_read(dev, mtdx.phys[0], MIIRegister18);
; if (data & SPD_DET_100)
; mtdx.line_speed = 2; /* 100M */
; else
; mtdx.line_speed = 1; /* 10M */
; if (data & DPLX_DET_FULL)
; mtdx.duplexmode = 2; /* full duplex mode */
; else
; mtdx.duplexmode = 1; /* half duplex mode */
; } else if (mtdx.PHYType equ= AhdocPHY) {
; unsigned int data;
;
; data = mdio_read(dev, mtdx.phys[0], DiagnosticReg);
; if (data & Speed_100)
; mtdx.line_speed = 2; /* 100M */
; else
; mtdx.line_speed = 1; /* 10M */
; if (data & DPLX_FULL)
; mtdx.duplexmode = 2; /* full duplex mode */
; else
; mtdx.duplexmode = 1; /* half duplex mode */
; }
; else if (mtdx.PHYType equ= MarvellPHY) {
; unsigned int data;
;
; data = mdio_read(dev, mtdx.phys[0], SpecificReg);
; if (data & Full_Duplex)
; mtdx.duplexmode = 2; /* full duplex mode */
; else
; mtdx.duplexmode = 1; /* half duplex mode */
; data &= SpeedMask;
; if (data equ= Speed_1000M)
; mtdx.line_speed = 3; /* 1000M */
; else if (data equ= Speed_100M)
; mtdx.line_speed = 2; /* 100M */
; else
; mtdx.line_speed = 1; /* 10M */
; }
; else if (mtdx.PHYType equ= Myson981) {
; unsigned int data;
;
; data = mdio_read(dev, mtdx.phys[0], StatusRegister);
;
; if (data & SPEED100)
; mtdx.line_speed = 2;
; else
; mtdx.line_speed = 1;
;
; if (data & FULLMODE)
; mtdx.duplexmode = 2;
; else
; mtdx.duplexmode = 1;
; }
; else if (mtdx.PHYType equ= LevelOnePHY) {
; unsigned int data;
;
; data = mdio_read(dev, mtdx.phys[0], SpecificReg);
; if (data & LXT1000_Full)
; mtdx.duplexmode = 2; /* full duplex mode */
; else
; mtdx.duplexmode = 1; /* half duplex mode */
; data &= SpeedMask;
; if (data equ= LXT1000_1000M)
; mtdx.line_speed = 3; /* 1000M */
; else if (data equ= LXT1000_100M)
; mtdx.line_speed = 2; /* 100M */
; else
; mtdx.line_speed = 1; /* 10M */
; }
; // chage crvalue
; // mtdx.crvalue&equ(~PS10)&(~FD);
; mtdx.crvalue &= (~PS10) & (~FD) & (~PS1000);
; if (mtdx.line_speed equ= 1)
; mtdx.crvalue |= PS10;
; else if (mtdx.line_speed equ= 3)
; mtdx.crvalue |= PS1000;
; if (mtdx.duplexmode equ= 2)
; mtdx.crvalue |= FD;
ret
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Transmit ;;
;; ;;
;; In: buffer pointer in [esp+4] ;;
;; size of buffer in [esp+8] ;;
;; pointer to device structure in ebx ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
proc transmit stdcall bufferptr
pushf
cli
mov esi, [bufferptr]
DEBUGF 1,"Transmitting packet, buffer:%x, size:%u\n", [bufferptr], [esi + NET_BUFF.length]
lea eax, [esi + NET_BUFF.data]
DEBUGF 1,"To: %x-%x-%x-%x-%x-%x From: %x-%x-%x-%x-%x-%x Type:%x%x\n",\
[eax+00]:2,[eax+01]:2,[eax+02]:2,[eax+03]:2,[eax+04]:2,[eax+05]:2,\
[eax+06]:2,[eax+07]:2,[eax+08]:2,[eax+09]:2,[eax+10]:2,[eax+11]:2,\
[eax+13]:2,[eax+12]:2
cmp [esi + NET_BUFF.length], 1514
ja .fail
cmp [esi + NET_BUFF.length], 60
jb .fail
mov esi, [ebx + device.cur_tx]
test [esi + descriptor.status], TXOWN
jnz .fail
push [esi + descriptor.next_desc_logical]
pop [ebx + device.cur_tx]
mov eax, [bufferptr]
mov [esi + descriptor.skbuff], eax
add eax, [eax + NET_BUFF.offset]
invoke GetPhysAddr
mov [esi + descriptor.buffer], eax
mov eax, [bufferptr]
mov eax, [eax + NET_BUFF.length]
mov ecx, eax
shl eax, PKTSShift ; packet size
shl ecx, TBSShift
or eax, ecx
or eax, TXIC + TXLD + TXFD + CRCEnable + PADEnable
mov [esi + descriptor.control], eax
mov [esi + descriptor.status], TXOWN
; Update stats
inc [ebx + device.packets_tx]
mov eax, [bufferptr]
mov ecx, [eax + NET_BUFF.length]
add dword[ebx + device.bytes_tx], ecx
adc dword[ebx + device.bytes_tx + 4], 0
; TX Poll
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], TXPDR
xor eax, eax
out dx, eax
DEBUGF 1,"Transmit OK\n"
popf
xor eax, eax
ret
.fail:
DEBUGF 2,"Transmit failed\n"
invoke NetFree, [bufferptr]
popf
or eax, -1
ret
endp
align 4
read_mac:
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], PAR0
lea edi, [ebx + device.mac]
insd
set_io [ebx + device.io_addr], PAR1
insw
DEBUGF 1,"MAC = %x-%x-%x-%x-%x-%x\n",\
[ebx + device.mac+0]:2,[ebx + device.mac+1]:2,[ebx + device.mac+2]:2,[ebx + device.mac+3]:2,[ebx + device.mac+4]:2,[ebx + device.mac+5]:2
ret
align 4
write_mac:
ret
;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Interrupt handler ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;
align 4
int_handler:
push ebx esi edi
DEBUGF 1,"INT\n"
; find pointer of device wich made IRQ occur
mov ecx, [devices]
test ecx, ecx
jz .nothing
mov esi, device_list
.nextdevice:
mov ebx, [esi]
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], ISR
in eax, dx
out dx, eax ; send it back to ACK
test eax, eax
jnz .got_it
.continue:
add esi, 4
dec ecx
jnz .nextdevice
.nothing:
pop edi esi ebx
xor eax, eax
ret ; If no device was found, abort (The irq was probably for a device, not registered to this driver)
.got_it:
DEBUGF 1,"Device: %x Status: %x\n", ebx, ax
test ax, RI ; receive interrupt
jz .no_rx
push ax
.rx_loop:
mov esi, [ebx + device.cur_rx]
test [esi + descriptor.status], RXOWN
jnz .rx_done
push ebx
push .rx_complete
mov ecx, [esi + descriptor.status]
shr ecx, FLNGShift
sub ecx, 4 ; we don't need CRC
DEBUGF 1,"Received %u bytes\n", ecx
mov eax, [esi + descriptor.skbuff]
push eax
mov [eax + NET_BUFF.length], ecx
mov [eax + NET_BUFF.device], ebx
mov [eax + NET_BUFF.offset], NET_BUFF.data
; Update stats
add dword[ebx + device.bytes_rx], ecx
adc dword[ebx + device.bytes_rx + 4], 0
inc [ebx + device.packets_rx]
jmp [EthInput]
.rx_complete:
pop ebx
mov esi, [ebx + device.cur_rx]
mov [esi + descriptor.control], 1514 shl RBSShift
push esi
invoke NetAlloc, 1514+NET_BUFF.data
pop esi
; test eax, eax
; jz .rx_loop
mov [esi + descriptor.skbuff], eax
invoke GetPhysAddr
add eax, NET_BUFF.data
mov [esi + descriptor.buffer], eax
mov [esi + descriptor.status], RXOWN
push [esi + descriptor.next_desc_logical]
pop [ebx + device.cur_rx]
jmp .rx_loop
.rx_done:
DEBUGF 1,"RX done\n"
; Restart Rx engine if stopped.
set_io [ebx + device.io_addr], 0
set_io [ebx + device.io_addr], RXPDR
xor eax, eax
out dx, eax
pop ax
.no_rx:
test ax, TI ; transmit interrupt
jz .no_tx
DEBUGF 1,"TX\n"
push ax
lea esi, [ebx + device.tx_desc]
mov ecx, NUM_TX_DESC
.tx_loop:
test [esi + descriptor.status], TXOWN
jnz .skip_this_one
mov eax, [esi + descriptor.skbuff]
test eax, eax
je .skip_this_one
mov [esi + descriptor.skbuff], 0
DEBUGF 1,"freeing buffer: 0x%x\n", eax
invoke NetFree, eax
.skip_this_one:
mov esi, [esi + descriptor.next_desc_logical]
loop .tx_loop
pop ax
.no_tx:
test ax, LSCStatus
jz .no_link_change
push ax
call getlinkstatus
pop ax
.no_link_change:
; test ax, TBU
; jz .no_tbu
; DEBUGF 2,"Transmit buffer unavailable!\n"
; .no_tbu:
.fail:
pop edi esi ebx
xor eax, eax
inc eax
ret
; End of code
data fixups
end data
include '../peimport.inc'
my_service db 'MTD80X',0 ; max 16 chars include zero
sz_mtd800 db "Myson MTD800", 0
sz_mtd803 db "Surecom EP-320X", 0
sz_mtd891 db "Myson MTD891", 0
include_debug_strings ; All data wich FDO uses will be included here
align 4
devices dd 0
device_list rd MAX_DEVICES ; This list contains all pointers to device structures the driver is handling
Reference in New Issue View Git Blame Copy Permalink