1632 lines
58 KiB
NASM
1632 lines
58 KiB
NASM
; standard driver stuff
|
|
format MS COFF
|
|
|
|
DEBUG = 1
|
|
DUMP_PACKETS = 0
|
|
|
|
; this is for DEBUGF macro from 'fdo.inc'
|
|
__DEBUG__ = 1
|
|
__DEBUG_LEVEL__ = 1
|
|
|
|
include 'proc32.inc'
|
|
include 'imports.inc'
|
|
include 'fdo.inc'
|
|
|
|
public START
|
|
public version
|
|
|
|
; USB constants
|
|
DEVICE_DESCR_TYPE = 1
|
|
CONFIG_DESCR_TYPE = 2
|
|
STRING_DESCR_TYPE = 3
|
|
INTERFACE_DESCR_TYPE = 4
|
|
ENDPOINT_DESCR_TYPE = 5
|
|
DEVICE_QUALIFIER_DESCR_TYPE = 6
|
|
|
|
CONTROL_PIPE = 0
|
|
ISOCHRONOUS_PIPE = 1
|
|
BULK_PIPE = 2
|
|
INTERRUPT_PIPE = 3
|
|
|
|
; USB structures
|
|
virtual at 0
|
|
config_descr:
|
|
.bLength db ?
|
|
.bDescriptorType db ?
|
|
.wTotalLength dw ?
|
|
.bNumInterfaces db ?
|
|
.bConfigurationValue db ?
|
|
.iConfiguration db ?
|
|
.bmAttributes db ?
|
|
.bMaxPower db ?
|
|
.sizeof:
|
|
end virtual
|
|
|
|
virtual at 0
|
|
interface_descr:
|
|
.bLength db ?
|
|
.bDescriptorType db ?
|
|
.bInterfaceNumber db ?
|
|
.bAlternateSetting db ?
|
|
.bNumEndpoints db ?
|
|
.bInterfaceClass db ?
|
|
.bInterfaceSubClass db ?
|
|
.bInterfaceProtocol db ?
|
|
.iInterface db ?
|
|
.sizeof:
|
|
end virtual
|
|
|
|
virtual at 0
|
|
endpoint_descr:
|
|
.bLength db ?
|
|
.bDescriptorType db ?
|
|
.bEndpointAddress db ?
|
|
.bmAttributes db ?
|
|
.wMaxPacketSize dw ?
|
|
.bInterval db ?
|
|
.sizeof:
|
|
end virtual
|
|
|
|
; Mass storage protocol constants, USB layer
|
|
REQUEST_GETMAXLUN = 0xFE ; get max lun
|
|
REQUEST_BORESET = 0xFF ; bulk-only reset
|
|
|
|
; Mass storage protocol structures, USB layer
|
|
; Sent from host to device in the first stage of an operation.
|
|
struc command_block_wrapper
|
|
{
|
|
.Signature dd ? ; the constant 'USBC'
|
|
.Tag dd ? ; identifies response with request
|
|
.Length dd ? ; length of data-transport phase
|
|
.Flags db ? ; one of CBW_FLAG_*
|
|
CBW_FLAG_OUT = 0
|
|
CBW_FLAG_IN = 80h
|
|
.LUN db ? ; addressed unit
|
|
.CommandLength db ? ; the length of the following field
|
|
.Command rb 16
|
|
.sizeof:
|
|
}
|
|
virtual at 0
|
|
command_block_wrapper command_block_wrapper
|
|
end virtual
|
|
|
|
; Sent from device to host in the last stage of an operation.
|
|
struc command_status_wrapper
|
|
{
|
|
.Signature dd ? ; the constant 'USBS'
|
|
.Tag dd ? ; identifies response with request
|
|
.LengthRest dd ? ; .Length - (size of data which were transferred)
|
|
.Status db ? ; one of CSW_STATUS_*
|
|
CSW_STATUS_OK = 0
|
|
CSW_STATUS_FAIL = 1
|
|
CSW_STATUS_FATAL = 2
|
|
.sizeof:
|
|
}
|
|
virtual at 0
|
|
command_status_wrapper command_status_wrapper
|
|
end virtual
|
|
|
|
; Constants of SCSI layer
|
|
SCSI_REQUEST_SENSE = 3
|
|
SCSI_INQUIRY = 12h
|
|
SCSI_READ_CAPACITY = 25h
|
|
SCSI_READ10 = 28h
|
|
SCSI_WRITE10 = 2Ah
|
|
|
|
; Result of SCSI REQUEST SENSE command.
|
|
SENSE_UNKNOWN = 0
|
|
SENSE_RECOVERED_ERROR = 1
|
|
SENSE_NOT_READY = 2
|
|
SENSE_MEDIUM_ERROR = 3
|
|
SENSE_HARDWARE_ERROR = 4
|
|
SENSE_ILLEGAL_REQUEST = 5
|
|
SENSE_UNIT_ATTENTION = 6
|
|
SENSE_DATA_PROTECT = 7
|
|
SENSE_BLANK_CHECK = 8
|
|
; 9 is vendor-specific
|
|
SENSE_COPY_ABORTED = 10
|
|
SENSE_ABORTED_COMMAND = 11
|
|
SENSE_EQUAL = 12
|
|
SENSE_VOLUME_OVERFLOW = 13
|
|
SENSE_MISCOMPARE = 14
|
|
; 15 is reserved
|
|
|
|
; Structures of SCSI layer
|
|
; Result of SCSI INQUIRY request.
|
|
struc inquiry_data
|
|
{
|
|
.PeripheralDevice db ? ; lower 5 bits are PeripheralDeviceType
|
|
; upper 3 bits are PeripheralQualifier
|
|
.RemovableMedium db ? ; upper bit is RemovableMedium
|
|
; other bits are for compatibility
|
|
.Version db ? ; lower 3 bits are ANSI-Approved version
|
|
; next 3 bits are ECMA version
|
|
; upper 2 bits are ISO version
|
|
.ResponseDataFormat db ? ; lower 4 bits are ResponseDataFormat
|
|
; bit 6 is TrmIOP
|
|
; bit 7 is AENC
|
|
.AdditionalLength db ?
|
|
dw ? ; reserved
|
|
.Flags db ?
|
|
.VendorID rb 8 ; vendor ID, big-endian
|
|
.ProductID rb 16 ; product ID, big-endian
|
|
.ProductRevBE dd ? ; product revision, big-endian
|
|
.sizeof:
|
|
}
|
|
virtual at 0
|
|
inquiry_data inquiry_data
|
|
end virtual
|
|
|
|
struc sense_data
|
|
{
|
|
.ErrorCode db ? ; lower 7 bits are error code:
|
|
; 70h = current error,
|
|
; 71h = deferred error
|
|
; upper bit is InformationValid
|
|
.SegmentNumber db ? ; number of segment descriptor
|
|
; for commands COPY [+VERIFY], COMPARE
|
|
.SenseKey db ? ; bits 0-3 are one of SENSE_*
|
|
; bit 4 is reserved
|
|
; bit 5 is IncorrectLengthIndicator
|
|
; bits 6 and 7 are used by
|
|
; sequential-access devices
|
|
.Information dd ? ; command-specific
|
|
.AdditionalLength db ? ; length of data starting here
|
|
.CommandInformation dd ? ; command-specific
|
|
.AdditionalSenseCode db ? ; \ more detailed error code
|
|
.AdditionalSenseQual db ? ; / standard has a large table of them
|
|
.FRUCode db ? ; which part of device has failed
|
|
; (device-specific, not regulated)
|
|
.SenseKeySpecific rb 3 ; depends on SenseKey
|
|
.sizeof:
|
|
}
|
|
virtual at 0
|
|
sense_data sense_data
|
|
end virtual
|
|
|
|
; Device data
|
|
; USB Mass storage device has one or more logical units, identified by LUN,
|
|
; logical unit number. The highest value of LUN, that is, number of units
|
|
; minus 1, can be obtained via control request Get Max LUN.
|
|
virtual at 0
|
|
usb_device_data:
|
|
.ConfigPipe dd ? ; configuration pipe
|
|
.OutPipe dd ? ; pipe for OUT bulk endpoint
|
|
.InPipe dd ? ; pipe for IN bulk endpoint
|
|
.MaxLUN dd ? ; maximum Logical Unit Number
|
|
.LogicalDevices dd ? ; pointer to array of usb_unit_data
|
|
; 1 for a connected USB device, 1 for each disk device
|
|
; the structure can be freed when .NumReferences decreases to zero
|
|
.NumReferences dd ? ; number of references
|
|
.ConfigRequest rb 8 ; buffer for configuration requests
|
|
.LengthRest dd ? ; Length - (size of data which were transferred)
|
|
; All requests to a given device are serialized,
|
|
; only one request to a given device can be processed at a time.
|
|
; The current request and all pending requests are organized in the following
|
|
; queue, the head being the current request.
|
|
; NB: the queue must be device-wide due to the protocol:
|
|
; data stage is not tagged (unlike command_*_wrapper), so the only way to know
|
|
; what request the data are associated with is to guarantee that only one
|
|
; request is processing at the time.
|
|
.RequestsQueue rd 2
|
|
.QueueLock rd 3 ; protects .RequestsQueue
|
|
.InquiryData inquiry_data ; information about device
|
|
; data for the current request
|
|
.Command command_block_wrapper
|
|
.DeviceDisconnected db ?
|
|
.Status command_status_wrapper
|
|
.Sense sense_data
|
|
.sizeof:
|
|
end virtual
|
|
|
|
; Information about one logical device.
|
|
virtual at 0
|
|
usb_unit_data:
|
|
.Parent dd ? ; pointer to parent usb_device_data
|
|
.LUN db ? ; index in usb_device_data.LogicalDevices array
|
|
.DiskIndex db ? ; for name "usbhd<index>"
|
|
.MediaPresent db ?
|
|
db ? ; alignment
|
|
.DiskDevice dd ? ; handle of disk device or NULL
|
|
.SectorSize dd ? ; sector size
|
|
; For some devices, the first request to the medium fails with 'unit not ready'.
|
|
; When the code sees this status, it retries the command several times.
|
|
; Two following variables track the retry count and total time for those;
|
|
; total time is currently used only for debug output.
|
|
.UnitReadyAttempts dd ?
|
|
.TimerTicks dd ?
|
|
.sizeof:
|
|
end virtual
|
|
|
|
; This is the structure for items in the queue usb_device_data.RequestsQueue.
|
|
virtual at 0
|
|
request_queue_item:
|
|
.Next dd ? ; next item in the queue
|
|
.Prev dd ? ; prev item in the queue
|
|
.ReqBuilder dd ? ; procedure to fill command_block_wrapper
|
|
.Buffer dd ? ; input or output data
|
|
; (length is command_block_wrapper.Length)
|
|
.Callback dd ? ; procedure to call in the end of transfer
|
|
.UserData dd ? ; passed as-is to .Callback
|
|
; There are 3 possible stages of any request, one of them optional:
|
|
; command stage (host sends command_block_wrapper to device),
|
|
; optional data stage,
|
|
; status stage (device sends command_status_wrapper to host).
|
|
; Also, if a request fails, the code queues additional request
|
|
; SCSI_REQUEST_SENSE; sense_data from SCSI_REQUEST_SENSE
|
|
; contains some information about the error.
|
|
.Stage db ?
|
|
.sizeof:
|
|
end virtual
|
|
|
|
section '.flat' code readable align 16
|
|
; The start procedure.
|
|
proc START
|
|
virtual at esp
|
|
dd ? ; return address
|
|
.reason dd ? ; DRV_ENTRY or DRV_EXIT
|
|
end virtual
|
|
; 1. Test whether the procedure is called with the argument DRV_ENTRY.
|
|
; If not, return 0.
|
|
xor eax, eax ; initialize return value
|
|
cmp [.reason], 1 ; compare the argument
|
|
jnz .nothing
|
|
; 2. Initialize: we have one global mutex.
|
|
mov ecx, free_numbers_lock
|
|
call MutexInit
|
|
; 3. Register self as a USB driver.
|
|
; The name is my_driver = 'usbstor'; IOCTL interface is not supported;
|
|
; usb_functions is an offset of a structure with callback functions.
|
|
stdcall RegUSBDriver, my_driver, 0, usb_functions
|
|
; 4. Return the returned value of RegUSBDriver.
|
|
.nothing:
|
|
ret 4
|
|
endp
|
|
|
|
; Helper procedures to work with requests queue.
|
|
|
|
; Add a request to the queue. Stdcall with 5 arguments.
|
|
proc queue_request
|
|
push ebx esi
|
|
virtual at esp
|
|
rd 2 ; saved registers
|
|
dd ? ; return address
|
|
.device dd ? ; pointer to usb_device_data
|
|
.ReqBuilder dd ? ; request_queue_item.ReqBuilder
|
|
.Buffer dd ? ; request_queue_item.Buffer
|
|
.Callback dd ? ; request_queue_item.Callback
|
|
.UserData dd ? ; request_queue_item.UserData
|
|
end virtual
|
|
; 1. Allocate the memory for the request description.
|
|
movi eax, request_queue_item.sizeof
|
|
call Kmalloc
|
|
test eax, eax
|
|
jnz @f
|
|
mov esi, nomemory
|
|
call SysMsgBoardStr
|
|
pop esi ebx
|
|
ret 20
|
|
@@:
|
|
; 2. Fill user-provided parts of the request description.
|
|
push edi
|
|
xchg eax, ebx
|
|
lea esi, [.ReqBuilder+4]
|
|
lea edi, [ebx+request_queue_item.ReqBuilder]
|
|
movsd ; ReqBuilder
|
|
movsd ; Buffer
|
|
movsd ; Callback
|
|
movsd ; UserData
|
|
pop edi
|
|
; 3. Set stage to zero: not started.
|
|
mov [ebx+request_queue_item.Stage], 0
|
|
; 4. Lock the queue.
|
|
mov esi, [.device]
|
|
lea ecx, [esi+usb_device_data.QueueLock]
|
|
call MutexLock
|
|
; 5. Insert the request to the tail of the queue.
|
|
add esi, usb_device_data.RequestsQueue
|
|
mov edx, [esi+request_queue_item.Prev]
|
|
mov [ebx+request_queue_item.Next], esi
|
|
mov [ebx+request_queue_item.Prev], edx
|
|
mov [edx+request_queue_item.Next], ebx
|
|
mov [esi+request_queue_item.Prev], ebx
|
|
; 6. Test whether the queue was empty
|
|
; and the request should be started immediately.
|
|
cmp [esi+request_queue_item.Next], ebx
|
|
jnz .unlock
|
|
; 8. If the step 6 shows that the request is the first in the queue,
|
|
; start it.
|
|
sub esi, usb_device_data.RequestsQueue
|
|
call setup_request
|
|
jmp .nothing
|
|
.unlock:
|
|
call MutexUnlock
|
|
; 9. Return.
|
|
.nothing:
|
|
pop esi ebx
|
|
ret 20
|
|
endp
|
|
|
|
; The current request is completed. Call the callback,
|
|
; remove the request from the queue, start the next
|
|
; request if there is one.
|
|
; esi points to usb_device_data
|
|
proc complete_request
|
|
; 1. Print common debug messages on fails.
|
|
if DEBUG
|
|
cmp [esi+usb_device_data.Status.Status], CSW_STATUS_FAIL
|
|
jb .normal
|
|
jz .fail
|
|
DEBUGF 1, 'K : Fatal error during execution of command %x\n', [esi+usb_device_data.Command.Command]:2
|
|
jmp .normal
|
|
.fail:
|
|
DEBUGF 1, 'K : Command %x failed\n', [esi+usb_device_data.Command.Command]:2
|
|
.normal:
|
|
end if
|
|
; 2. Get the current request.
|
|
mov ebx, [esi+usb_device_data.RequestsQueue+request_queue_item.Next]
|
|
; 3. Call the callback.
|
|
stdcall [ebx+request_queue_item.Callback], esi, [ebx+request_queue_item.UserData]
|
|
; 4. Lock the queue.
|
|
lea ecx, [esi+usb_device_data.QueueLock]
|
|
call MutexLock
|
|
; 5. Remove the request.
|
|
lea edx, [esi+usb_device_data.RequestsQueue]
|
|
mov eax, [ebx+request_queue_item.Next]
|
|
mov [eax+request_queue_item.Prev], edx
|
|
mov [edx+request_queue_item.Next], eax
|
|
; 6. Free the request memory.
|
|
push eax edx
|
|
xchg eax, ebx
|
|
call Kfree
|
|
pop edx ebx
|
|
; 7. If there is a next request, start processing.
|
|
cmp ebx, edx
|
|
jnz setup_request
|
|
; 8. Unlock the queue and return.
|
|
lea ecx, [esi+usb_device_data.QueueLock]
|
|
call MutexUnlock
|
|
ret
|
|
endp
|
|
|
|
; Start processing the request. Called either by queue_request
|
|
; or when the previous request has been processed.
|
|
; Do not call directly, use queue_request.
|
|
; Must be called when queue is locked; unlocks the queue when returns.
|
|
proc setup_request
|
|
xor eax, eax
|
|
; 1. If DeviceDisconnected has been run, then all handles of pipes
|
|
; are invalid, so we must fail immediately.
|
|
; (That is why this function needs the locked queue: this
|
|
; guarantee that either DeviceDisconnected has been already run, or
|
|
; DeviceDisconnected will not return before the queue is unlocked.)
|
|
cmp [esi+usb_device_data.DeviceDisconnected], al
|
|
jnz .fatal
|
|
; 2. If the previous command has encountered a fatal error,
|
|
; perform reset recovery.
|
|
cmp [esi+usb_device_data.Status.Status], CSW_STATUS_FATAL
|
|
jb .norecovery
|
|
; 2a. Send Bulk-Only Mass Storage Reset command to config pipe.
|
|
lea edx, [esi+usb_device_data.ConfigRequest]
|
|
mov word [edx], (REQUEST_BORESET shl 8) + 21h ; class request
|
|
mov word [edx+6], ax ; length = 0
|
|
stdcall USBControlTransferAsync, [esi+usb_device_data.ConfigPipe], edx, eax, eax, recovery_callback1, esi, eax
|
|
; 2b. Fail here = fatal error.
|
|
test eax, eax
|
|
jz .fatal
|
|
; 2c. Otherwise, unlock the queue and return. recovery_callback1 will continue processing.
|
|
.unlock_return:
|
|
lea ecx, [esi+usb_device_data.QueueLock]
|
|
call MutexUnlock
|
|
ret
|
|
.norecovery:
|
|
; 3. Send the command. Fail (no memory or device disconnected) = fatal error.
|
|
; Otherwise, go to 2c.
|
|
call request_stage1
|
|
test eax, eax
|
|
jnz .unlock_return
|
|
.fatal:
|
|
; 4. Fatal error. Set status = FATAL, unlock the queue, complete the request.
|
|
mov [esi+usb_device_data.Status.Status], CSW_STATUS_FATAL
|
|
lea ecx, [esi+usb_device_data.QueueLock]
|
|
call MutexUnlock
|
|
jmp complete_request
|
|
endp
|
|
|
|
; Initiate USB transfer for the first stage of a request (send command).
|
|
proc request_stage1
|
|
mov ebx, [esi+usb_device_data.RequestsQueue+request_queue_item.Next]
|
|
; 1. Set the stage to 1 = command stage.
|
|
inc [ebx+request_queue_item.Stage]
|
|
; 2. Generate the command. Zero-initialize and use the caller-provided proc.
|
|
lea edx, [esi+usb_device_data.Command]
|
|
xor eax, eax
|
|
mov [edx+command_block_wrapper.CommandLength], 12
|
|
mov dword [edx+command_block_wrapper.Command], eax
|
|
mov dword [edx+command_block_wrapper.Command+4], eax
|
|
mov dword [edx+command_block_wrapper.Command+8], eax
|
|
mov dword [edx+command_block_wrapper.Command+12], eax
|
|
inc [edx+command_block_wrapper.Tag]
|
|
stdcall [ebx+request_queue_item.ReqBuilder], edx, [ebx+request_queue_item.UserData]
|
|
; 4. Initiate USB transfer.
|
|
lea edx, [esi+usb_device_data.Command]
|
|
if DUMP_PACKETS
|
|
DEBUGF 1,'K : USBSTOR out:'
|
|
mov eax, edx
|
|
mov ecx, command_block_wrapper.sizeof
|
|
call debug_dump
|
|
DEBUGF 1,'\n'
|
|
end if
|
|
stdcall USBNormalTransferAsync, [esi+usb_device_data.OutPipe], edx, command_block_wrapper.sizeof, request_callback1, esi, 0
|
|
test eax, eax
|
|
jz .nothing
|
|
; 5. If the next stage is data stage in the same direction, enqueue it here.
|
|
cmp [esi+usb_device_data.Command.Flags], 0
|
|
js .nothing
|
|
cmp [esi+usb_device_data.Command.Length], 0
|
|
jz .nothing
|
|
mov edx, [esi+usb_device_data.RequestsQueue+request_queue_item.Next]
|
|
if DUMP_PACKETS
|
|
DEBUGF 1,'K : USBSTOR out:'
|
|
mov eax, [edx+request_queue_item.Buffer]
|
|
mov ecx, [esi+usb_device_data.Command.Length]
|
|
call debug_dump
|
|
DEBUGF 1,'\n'
|
|
end if
|
|
stdcall USBNormalTransferAsync, [esi+usb_device_data.OutPipe], [edx+request_queue_item.Buffer], [esi+usb_device_data.Command.Length], request_callback2, esi, 0
|
|
.nothing:
|
|
ret
|
|
endp
|
|
|
|
if DUMP_PACKETS
|
|
proc debug_dump
|
|
test ecx, ecx
|
|
jz .done
|
|
.loop:
|
|
test ecx, 0Fh
|
|
jnz @f
|
|
DEBUGF 1,'\nK :'
|
|
@@:
|
|
DEBUGF 1,' %x',[eax]:2
|
|
inc eax
|
|
dec ecx
|
|
jnz .loop
|
|
.done:
|
|
ret
|
|
endp
|
|
end if
|
|
|
|
; Called when the Reset command is completed,
|
|
; either successfully or not.
|
|
proc recovery_callback1
|
|
virtual at esp
|
|
dd ? ; return address
|
|
.pipe dd ?
|
|
.status dd ?
|
|
.buffer dd ?
|
|
.length dd ?
|
|
.calldata dd ?
|
|
end virtual
|
|
cmp [.status], 0
|
|
jnz .error
|
|
; todo: reset pipes
|
|
push ebx esi
|
|
mov esi, [.calldata+8]
|
|
call request_stage1
|
|
pop esi ebx
|
|
test eax, eax
|
|
jz .error
|
|
ret 20
|
|
.error:
|
|
DEBUGF 1, 'K : error %d while resetting', [.status+24h]
|
|
jmp request_callback1.common_error
|
|
endp
|
|
|
|
; Called when the first stage of request is completed,
|
|
; either successfully or not.
|
|
proc request_callback1
|
|
virtual at esp
|
|
dd ? ; return address
|
|
.pipe dd ?
|
|
.status dd ?
|
|
.buffer dd ?
|
|
.length dd ?
|
|
.calldata dd ?
|
|
end virtual
|
|
; 1. Initialize.
|
|
mov ecx, [.calldata]
|
|
mov eax, [.status]
|
|
; 2. Test for error.
|
|
test eax, eax
|
|
jnz .error
|
|
; No error.
|
|
; 3. Increment the stage.
|
|
mov edx, [ecx+usb_device_data.RequestsQueue+request_queue_item.Next]
|
|
inc [edx+request_queue_item.Stage]
|
|
; 4. Check whether we need to send the data.
|
|
; 4a. If there is no data, skip this stage.
|
|
cmp [ecx+usb_device_data.Command.Length], 0
|
|
jz ..request_get_status
|
|
; 4b. If data were enqueued in the first stage, do nothing, wait for request_callback2.
|
|
cmp [ecx+usb_device_data.Command.Flags], 0
|
|
jns .nothing
|
|
; 5. Initiate USB transfer. If this fails, go to the error handler.
|
|
stdcall USBNormalTransferAsync, [ecx+usb_device_data.InPipe], [edx+request_queue_item.Buffer], [ecx+usb_device_data.Command.Length], request_callback2, ecx, 0
|
|
test eax, eax
|
|
jz .error
|
|
; 6. The status stage goes to the same direction, enqueue it now.
|
|
mov ecx, [.calldata]
|
|
jmp ..enqueue_status
|
|
.nothing:
|
|
ret 20
|
|
.error:
|
|
; Error.
|
|
; 7. Print debug message and complete the request as failed.
|
|
DEBUGF 1,'K : error %d after %d bytes in request stage\n',eax,[.length+24h]
|
|
; If device is disconnected and data stage is enqueued, do nothing;
|
|
; data stage callback will do everything.
|
|
cmp eax, 16
|
|
jnz .common_error
|
|
cmp [ecx+usb_device_data.Command.Flags], 0
|
|
js .common_error
|
|
cmp [ecx+usb_device_data.Command.Length], 0
|
|
jz .common_error
|
|
ret 20
|
|
.common_error:
|
|
; TODO: add recovery after STALL
|
|
mov ecx, [.calldata]
|
|
mov [ecx+usb_device_data.Status.Status], CSW_STATUS_FATAL
|
|
push ebx esi
|
|
mov esi, ecx
|
|
call complete_request
|
|
pop esi ebx
|
|
ret 20
|
|
endp
|
|
|
|
; Called when the second stage of request is completed,
|
|
; either successfully or not.
|
|
proc request_callback2
|
|
virtual at esp
|
|
dd ? ; return address
|
|
.pipe dd ?
|
|
.status dd ?
|
|
.buffer dd ?
|
|
.length dd ?
|
|
.calldata dd ?
|
|
end virtual
|
|
if DUMP_PACKETS
|
|
mov eax, [.calldata]
|
|
mov eax, [eax+usb_device_data.InPipe]
|
|
cmp [.pipe], eax
|
|
jnz @f
|
|
DEBUGF 1,'K : USBSTOR in:'
|
|
push eax ecx
|
|
mov eax, [.buffer+8]
|
|
mov ecx, [.length+8]
|
|
call debug_dump
|
|
pop ecx eax
|
|
DEBUGF 1,'\n'
|
|
@@:
|
|
end if
|
|
; 1. Initialize.
|
|
mov ecx, [.calldata]
|
|
mov eax, [.status]
|
|
; 2. Test for error.
|
|
test eax, eax
|
|
jnz .error
|
|
; No error.
|
|
; If the previous stage was in same direction, do nothing; status request is already enqueued.
|
|
cmp [ecx+usb_device_data.Command.Flags], 0
|
|
js .nothing
|
|
..request_get_status:
|
|
; 3. Increment the stage.
|
|
mov edx, [ecx+usb_device_data.RequestsQueue+request_queue_item.Next]
|
|
inc [edx+request_queue_item.Stage]
|
|
; 4. Initiate USB transfer. If this fails, go to the error handler.
|
|
..enqueue_status:
|
|
lea edx, [ecx+usb_device_data.Status]
|
|
stdcall USBNormalTransferAsync, [ecx+usb_device_data.InPipe], edx, command_status_wrapper.sizeof, request_callback3, ecx, 0
|
|
test eax, eax
|
|
jz .error
|
|
.nothing:
|
|
ret 20
|
|
.error:
|
|
; Error.
|
|
; 5. Print debug message and complete the request as failed.
|
|
DEBUGF 1,'K : error %d after %d bytes in data stage\n',eax,[.length+24h]
|
|
; If device is disconnected and data stage is enqueued, do nothing;
|
|
; status stage callback will do everything.
|
|
cmp [ecx+usb_device_data.Command.Flags], 0
|
|
js .nothing
|
|
jmp request_callback1.common_error
|
|
endp
|
|
|
|
; Called when the third stage of request is completed,
|
|
; either successfully or not.
|
|
proc request_callback3
|
|
virtual at esp
|
|
dd ? ; return address
|
|
.pipe dd ?
|
|
.status dd ?
|
|
.buffer dd ?
|
|
.length dd ?
|
|
.calldata dd ?
|
|
end virtual
|
|
if DUMP_PACKETS
|
|
DEBUGF 1,'K : USBSTOR in:'
|
|
mov eax, [.buffer]
|
|
mov ecx, [.length]
|
|
call debug_dump
|
|
DEBUGF 1,'\n'
|
|
end if
|
|
; 1. Initialize.
|
|
mov eax, [.status]
|
|
; 2. Test for error.
|
|
test eax, eax
|
|
jnz .transfer_error
|
|
; Transfer is OK.
|
|
; 3. Validate the status. Invalid status = fatal error.
|
|
push ebx esi
|
|
mov esi, [.calldata+8]
|
|
mov ebx, [esi+usb_device_data.RequestsQueue+request_queue_item.Next]
|
|
cmp [esi+usb_device_data.Status.Signature], 'USBS'
|
|
jnz .invalid
|
|
mov eax, [esi+usb_device_data.Command.Tag]
|
|
cmp [esi+usb_device_data.Status.Tag], eax
|
|
jnz .invalid
|
|
cmp [esi+usb_device_data.Status.Status], CSW_STATUS_FATAL
|
|
ja .invalid
|
|
; 4. The status block is valid. Check the status code.
|
|
jz .complete
|
|
; 5. If this command was not REQUEST_SENSE, copy status data to safe place.
|
|
; Otherwise, the original command has failed, so restore the fail status.
|
|
cmp byte [esi+usb_device_data.Command.Command], SCSI_REQUEST_SENSE
|
|
jz .request_sense
|
|
mov eax, [esi+usb_device_data.Status.LengthRest]
|
|
mov [esi+usb_device_data.LengthRest], eax
|
|
cmp [esi+usb_device_data.Status.Status], CSW_STATUS_FAIL
|
|
jz .fail
|
|
.complete:
|
|
call complete_request
|
|
.nothing:
|
|
pop esi ebx
|
|
ret 20
|
|
.request_sense:
|
|
mov [esi+usb_device_data.Status.Status], CSW_STATUS_FAIL
|
|
jmp .complete
|
|
.invalid:
|
|
; 6. Invalid status block. Say error, set status to fatal and complete request.
|
|
push esi
|
|
mov esi, invresponse
|
|
call SysMsgBoardStr
|
|
pop esi
|
|
mov [esi+usb_device_data.Status.Status], CSW_STATUS_FATAL
|
|
jmp .complete
|
|
.fail:
|
|
; 7. The command has failed.
|
|
; If this command was not REQUEST_SENSE, schedule the REQUEST_SENSE command
|
|
; to determine the reason of fail. Otherwise, assume that there is no error data.
|
|
cmp [esi+usb_device_data.Command.Command], SCSI_REQUEST_SENSE
|
|
jz .fail_request_sense
|
|
mov [ebx+request_queue_item.ReqBuilder], request_sense_req
|
|
lea eax, [esi+usb_device_data.Sense]
|
|
mov [ebx+request_queue_item.Buffer], eax
|
|
call request_stage1
|
|
test eax, eax
|
|
jnz .nothing
|
|
.fail_request_sense:
|
|
DEBUGF 1,'K : fail during REQUEST SENSE\n'
|
|
mov byte [esi+usb_device_data.Sense], 0
|
|
jmp .complete
|
|
.transfer_error:
|
|
; TODO: add recovery after STALL
|
|
DEBUGF 1,'K : error %d after %d bytes in status stage\n',eax,[.length+24h]
|
|
jmp request_callback1.common_error
|
|
endp
|
|
|
|
; Builder for SCSI_REQUEST_SENSE request.
|
|
; edx = first argument = pointer to usb_device_data.Command,
|
|
; second argument = custom data given to queue_request (ignored).
|
|
proc request_sense_req
|
|
mov [edx+command_block_wrapper.Length], sense_data.sizeof
|
|
mov [edx+command_block_wrapper.Flags], CBW_FLAG_IN
|
|
mov byte [edx+command_block_wrapper.Command+0], SCSI_REQUEST_SENSE
|
|
mov byte [edx+command_block_wrapper.Command+4], sense_data.sizeof
|
|
ret 8
|
|
endp
|
|
|
|
; This procedure is called when new mass-storage device is detected.
|
|
; It initializes the device.
|
|
; Technically, initialization implies sending several USB queries,
|
|
; so it is split in several procedures. The first is AddDevice,
|
|
; other are callbacks which will be called at some time in the future,
|
|
; when the device will respond.
|
|
; The general scheme:
|
|
; * AddDevice parses descriptors, opens pipes; if everything is ok,
|
|
; AddDevice sends REQUEST_GETMAXLUN with callback known_lun_callback;
|
|
; * known_lun_callback allocates memory for LogicalDevices and sends
|
|
; SCSI_TEST_UNIT_READY to all logical devices with test_unit_ready_callback;
|
|
; * test_unit_ready_callback checks whether the unit is ready;
|
|
; if not, it repeats the same request several times;
|
|
; if ok or there were too many attempts, it sends SCSI_INQUIRY with
|
|
; callback inquiry_callback;
|
|
; * inquiry_callback checks that a logical device is a block device
|
|
; and the unit was ready; if so, it notifies the kernel about new disk device.
|
|
proc AddDevice
|
|
push ebx esi
|
|
virtual at esp
|
|
rd 2 ; saved registers ebx, esi
|
|
dd ? ; return address
|
|
.pipe0 dd ? ; handle of the config pipe
|
|
.config dd ? ; pointer to config_descr
|
|
.interface dd ? ; pointer to interface_descr
|
|
end virtual
|
|
; 1. Check device type. Currently only SCSI-command-set Bulk-only devices
|
|
; are supported.
|
|
; 1a. Get the subclass and the protocol. Since bInterfaceSubClass and
|
|
; bInterfaceProtocol are subsequent in interface_descr, just one
|
|
; memory reference is used for both.
|
|
mov esi, [.interface]
|
|
xor ebx, ebx
|
|
mov cx, word [esi+interface_descr.bInterfaceSubClass]
|
|
; 1b. For Mass-storage SCSI-command-set Bulk-only devices subclass must be 6
|
|
; and protocol must be 50h. Check.
|
|
cmp cx, 0x5006
|
|
jz .known
|
|
; There are devices with subclass 5 which use the same protocol 50h.
|
|
; The difference is not important for the code except for this test,
|
|
; so allow them to proceed also.
|
|
cmp cx, 0x5005
|
|
jz .known
|
|
; 1c. If the device is unknown, print a message and go to 11c.
|
|
mov esi, unkdevice
|
|
call SysMsgBoardStr
|
|
jmp .nothing
|
|
; 1d. If the device uses known command set, print a message and continue
|
|
; configuring.
|
|
.known:
|
|
push esi
|
|
mov esi, okdevice
|
|
call SysMsgBoardStr
|
|
pop esi
|
|
; 2. Allocate memory for internal device data.
|
|
; 2a. Call the kernel.
|
|
mov eax, usb_device_data.sizeof
|
|
call Kmalloc
|
|
; 2b. Check return value.
|
|
test eax, eax
|
|
jnz @f
|
|
; 2c. If failed, say a message and go to 11c.
|
|
mov esi, nomemory
|
|
call SysMsgBoardStr
|
|
jmp .nothing
|
|
@@:
|
|
; 2d. If succeeded, zero the contents and continue configuring.
|
|
xchg ebx, eax ; ebx will point to usb_device_data
|
|
xor eax, eax
|
|
mov [ebx+usb_device_data.OutPipe], eax
|
|
mov [ebx+usb_device_data.InPipe], eax
|
|
mov [ebx+usb_device_data.MaxLUN], eax
|
|
mov [ebx+usb_device_data.LogicalDevices], eax
|
|
mov dword [ebx+usb_device_data.ConfigRequest], eax
|
|
mov dword [ebx+usb_device_data.ConfigRequest+4], eax
|
|
mov [ebx+usb_device_data.Status.Status], al
|
|
mov [ebx+usb_device_data.DeviceDisconnected], al
|
|
; 2e. There is one reference: a connected USB device.
|
|
inc eax
|
|
mov [ebx+usb_device_data.NumReferences], eax
|
|
; 2f. Save handle of configuration pipe for reset recovery.
|
|
mov eax, [.pipe0]
|
|
mov [ebx+usb_device_data.ConfigPipe], eax
|
|
; 2g. Save the interface number for configuration requests.
|
|
mov al, [esi+interface_descr.bInterfaceNumber]
|
|
mov [ebx+usb_device_data.ConfigRequest+4], al
|
|
; 2h. Initialize common fields in command wrapper.
|
|
mov [ebx+usb_device_data.Command.Signature], 'USBC'
|
|
mov [ebx+usb_device_data.Command.Tag], 'xxxx'
|
|
; 2i. Initialize requests queue.
|
|
lea eax, [ebx+usb_device_data.RequestsQueue]
|
|
mov [eax+request_queue_item.Next], eax
|
|
mov [eax+request_queue_item.Prev], eax
|
|
lea ecx, [ebx+usb_device_data.QueueLock]
|
|
call MutexInit
|
|
; Bulk-only mass storage devices use one OUT bulk endpoint for sending
|
|
; command/data and one IN bulk endpoint for receiving data/status.
|
|
; Look for those endpoints.
|
|
; 3. Get the upper bound of all descriptors' data.
|
|
mov edx, [.config] ; configuration descriptor
|
|
movzx ecx, [edx+config_descr.wTotalLength]
|
|
add edx, ecx
|
|
; 4. Loop over all descriptors until
|
|
; either end-of-data reached - this is fail
|
|
; or interface descriptor found - this is fail, all further data
|
|
; correspond to that interface
|
|
; or both endpoint descriptors found.
|
|
; 4a. Loop start: esi points to the interface descriptor,
|
|
.lookep:
|
|
; 4b. Get next descriptor.
|
|
movzx ecx, byte [esi] ; the first byte of all descriptors is length
|
|
add esi, ecx
|
|
; 4c. Check that at least two bytes are readable. The opposite is an error.
|
|
inc esi
|
|
cmp esi, edx
|
|
jae .errorep
|
|
dec esi
|
|
; 4d. Check that this descriptor is not interface descriptor. The opposite is
|
|
; an error.
|
|
cmp byte [esi+endpoint_descr.bDescriptorType], INTERFACE_DESCR_TYPE
|
|
jz .errorep
|
|
; 4e. Test whether this descriptor is an endpoint descriptor. If not, continue
|
|
; the loop.
|
|
cmp byte [esi+endpoint_descr.bDescriptorType], ENDPOINT_DESCR_TYPE
|
|
jnz .lookep
|
|
; 5. Check that the descriptor contains all required data and all data are
|
|
; readable. The opposite is an error.
|
|
cmp byte [esi+endpoint_descr.bLength], endpoint_descr.sizeof
|
|
jb .errorep
|
|
lea ecx, [esi+endpoint_descr.sizeof]
|
|
cmp ecx, edx
|
|
ja .errorep
|
|
; 6. Check that the endpoint is bulk endpoint. The opposite is an error.
|
|
mov cl, [esi+endpoint_descr.bmAttributes]
|
|
and cl, 3
|
|
cmp cl, BULK_PIPE
|
|
jnz .errorep
|
|
; 7. Get the direction of this endpoint.
|
|
movzx ecx, [esi+endpoint_descr.bEndpointAddress]
|
|
shr ecx, 7
|
|
; 8. Test whether a pipe for this direction is already opened. If so, continue
|
|
; the loop.
|
|
cmp [ebx+usb_device_data.OutPipe+ecx*4], 0
|
|
jnz .lookep
|
|
; 9. Open pipe for this endpoint.
|
|
; 9a. Save registers.
|
|
push ecx edx
|
|
; 9b. Load parameters from the descriptor.
|
|
movzx ecx, [esi+endpoint_descr.bEndpointAddress]
|
|
movzx edx, [esi+endpoint_descr.wMaxPacketSize]
|
|
movzx eax, [esi+endpoint_descr.bInterval] ; not used for USB1, may be important for USB2
|
|
; 9c. Call the kernel.
|
|
stdcall USBOpenPipe, [ebx+usb_device_data.ConfigPipe], ecx, edx, BULK_PIPE, eax
|
|
; 9d. Restore registers.
|
|
pop edx ecx
|
|
; 9e. Check result. If failed, go to 11b.
|
|
test eax, eax
|
|
jz .free
|
|
; 9f. Save result.
|
|
mov [ebx+usb_device_data.OutPipe+ecx*4], eax
|
|
; 10. Test whether the second pipe is already opened. If not, continue loop.
|
|
xor ecx, 1
|
|
cmp [ebx+usb_device_data.OutPipe+ecx*4], 0
|
|
jz .lookep
|
|
jmp .created
|
|
; 11. An error occured during processing endpoint descriptor.
|
|
.errorep:
|
|
; 11a. Print a message.
|
|
DEBUGF 1,'K : error: invalid endpoint descriptor\n'
|
|
.free:
|
|
; 11b. Free the allocated usb_device_data.
|
|
xchg eax, ebx
|
|
call Kfree
|
|
.nothing:
|
|
; 11c. Return an error.
|
|
xor eax, eax
|
|
jmp .return
|
|
.created:
|
|
; 12. Pipes are opened. Send GetMaxLUN control request.
|
|
lea eax, [ebx+usb_device_data.ConfigRequest]
|
|
mov byte [eax], 0A1h ; class request from interface
|
|
mov byte [eax+1], REQUEST_GETMAXLUN
|
|
mov byte [eax+6], 1 ; transfer 1 byte
|
|
lea ecx, [ebx+usb_device_data.MaxLUN]
|
|
if DUMP_PACKETS
|
|
DEBUGF 1,'K : GETMAXLUN: %x %x %x %x %x %x %x %x\n',[eax]:2,[eax+1]:2,[eax+2]:2,[eax+3]:2,[eax+4]:2,[eax+5]:2,[eax+6]:2,[eax+7]:2
|
|
end if
|
|
stdcall USBControlTransferAsync, [ebx+usb_device_data.ConfigPipe], eax, ecx, 1, known_lun_callback, ebx, 0
|
|
; 13. Return with pointer to device data as returned value.
|
|
xchg eax, ebx
|
|
.return:
|
|
pop esi ebx
|
|
ret 12
|
|
endp
|
|
|
|
; This function is called when REQUEST_GETMAXLUN is done,
|
|
; either successful or unsuccessful.
|
|
proc known_lun_callback
|
|
push ebx esi
|
|
virtual at esp
|
|
rd 2 ; saved registers
|
|
dd ? ; return address
|
|
.pipe dd ?
|
|
.status dd ?
|
|
.buffer dd ?
|
|
.length dd ?
|
|
.calldata dd ?
|
|
end virtual
|
|
; 1. Check the status. If the request failed, assume that MaxLUN is zero.
|
|
mov ebx, [.calldata]
|
|
mov eax, [.status]
|
|
test eax, eax
|
|
jz @f
|
|
DEBUGF 1, 'K : GETMAXLUN failed with status %d, assuming zero\n', eax
|
|
mov [ebx+usb_device_data.MaxLUN], 0
|
|
@@:
|
|
; 2. Allocate the memory for logical devices.
|
|
mov eax, [ebx+usb_device_data.MaxLUN]
|
|
inc eax
|
|
DEBUGF 1,'K : %d logical unit(s)\n',eax
|
|
imul eax, usb_unit_data.sizeof
|
|
push ebx
|
|
call Kmalloc
|
|
pop ebx
|
|
; If failed, print a message and do nothing.
|
|
test eax, eax
|
|
jnz @f
|
|
mov esi, nomemory
|
|
call SysMsgBoardStr
|
|
pop esi ebx
|
|
ret 20
|
|
@@:
|
|
mov [ebx+usb_device_data.LogicalDevices], eax
|
|
; 3. Initialize logical devices and initiate TEST_UNIT_READY request.
|
|
xchg esi, eax
|
|
xor ecx, ecx
|
|
.looplun:
|
|
mov [esi+usb_unit_data.Parent], ebx
|
|
mov [esi+usb_unit_data.LUN], cl
|
|
xor eax, eax
|
|
mov [esi+usb_unit_data.MediaPresent], al
|
|
mov [esi+usb_unit_data.DiskDevice], eax
|
|
mov [esi+usb_unit_data.SectorSize], eax
|
|
mov [esi+usb_unit_data.UnitReadyAttempts], eax
|
|
push ecx
|
|
call GetTimerTicks
|
|
mov [esi+usb_unit_data.TimerTicks], eax
|
|
stdcall queue_request, ebx, test_unit_ready_req, 0, test_unit_ready_callback, esi
|
|
pop ecx
|
|
inc ecx
|
|
add esi, usb_unit_data.sizeof
|
|
cmp ecx, [ebx+usb_device_data.MaxLUN]
|
|
jbe .looplun
|
|
; 4. Return.
|
|
pop esi ebx
|
|
ret 20
|
|
endp
|
|
|
|
; Builder for SCSI INQUIRY request.
|
|
; edx = first argument = pointer to usb_device_data.Command,
|
|
; second argument = custom data given to queue_request.
|
|
proc inquiry_req
|
|
mov eax, [esp+8]
|
|
mov al, [eax+usb_unit_data.LUN]
|
|
mov [edx+command_block_wrapper.Length], inquiry_data.sizeof
|
|
mov [edx+command_block_wrapper.Flags], CBW_FLAG_IN
|
|
mov [edx+command_block_wrapper.LUN], al
|
|
mov byte [edx+command_block_wrapper.Command+0], SCSI_INQUIRY
|
|
mov byte [edx+command_block_wrapper.Command+4], inquiry_data.sizeof
|
|
ret 8
|
|
endp
|
|
|
|
; Called when SCSI INQUIRY request is completed.
|
|
proc inquiry_callback
|
|
; 1. Check the status.
|
|
mov ecx, [esp+4]
|
|
cmp [ecx+usb_device_data.Status.Status], CSW_STATUS_OK
|
|
jnz .fail
|
|
; 2. The command has completed successfully.
|
|
; Print a message showing device type, ignore anything but block devices.
|
|
mov al, [ecx+usb_device_data.InquiryData.PeripheralDevice]
|
|
and al, 1Fh
|
|
DEBUGF 1,'K : peripheral device type is %x\n',al
|
|
test al, al
|
|
jnz .nothing
|
|
DEBUGF 1,'K : direct-access mass storage device detected\n'
|
|
; 3. We have found a new disk device. Increment number of references.
|
|
lock inc [ecx+usb_device_data.NumReferences]
|
|
; Unfortunately, we are now in the context of the USB thread,
|
|
; so we can't notify the kernel immediately: it would try to do something
|
|
; with a new disk, those actions would be synchronous and would require
|
|
; waiting for results of USB requests, but we need to exit this callback
|
|
; to allow the USB thread to continue working and handling those requests.
|
|
; 4. Thus, create a temporary kernel thread which would do it.
|
|
mov edx, [esp+8]
|
|
push ebx ecx esi edi
|
|
movi ebx, 1
|
|
mov ecx, new_disk_thread
|
|
; edx = parameter
|
|
call CreateThread
|
|
pop edi esi ecx ebx
|
|
cmp eax, -1
|
|
jnz .nothing
|
|
; on error, reverse step 3
|
|
lock dec [ecx+usb_device_data.NumReferences]
|
|
.nothing:
|
|
ret 8
|
|
.fail:
|
|
; 4. The command has failed. Print a message and do nothing.
|
|
push esi
|
|
mov esi, inquiry_fail
|
|
call SysMsgBoardStr
|
|
pop esi
|
|
ret 8
|
|
endp
|
|
|
|
; Builder for SCSI TEST_UNIT_READY request.
|
|
; edx = first argument = pointer to usb_device_data.Command,
|
|
; second argument = custom data given to queue_request.
|
|
proc test_unit_ready_req
|
|
mov eax, [esp+8]
|
|
mov al, [eax+usb_unit_data.LUN]
|
|
mov [edx+command_block_wrapper.Length], 0
|
|
mov [edx+command_block_wrapper.Flags], CBW_FLAG_IN
|
|
mov [edx+command_block_wrapper.LUN], al
|
|
ret 8
|
|
endp
|
|
|
|
; Called when SCSI TEST_UNIT_READY request is completed.
|
|
proc test_unit_ready_callback
|
|
virtual at esp
|
|
dd ? ; return address
|
|
.device dd ?
|
|
.calldata dd ?
|
|
end virtual
|
|
; 1. Check the status.
|
|
mov ecx, [.device]
|
|
mov edx, [.calldata]
|
|
cmp [ecx+usb_device_data.Status.Status], CSW_STATUS_OK
|
|
jnz .fail
|
|
; 2. The command has completed successfully,
|
|
; possibly after some repetitions. Print a debug message showing
|
|
; number and time of those. Remember that media is ready and go to 4.
|
|
DEBUGF 1,'K : media is ready\n'
|
|
call GetTimerTicks
|
|
sub eax, [edx+usb_unit_data.TimerTicks]
|
|
DEBUGF 1,'K : %d attempts, %d ticks\n',[edx+usb_unit_data.UnitReadyAttempts],eax
|
|
inc [edx+usb_unit_data.MediaPresent]
|
|
jmp .inquiry
|
|
.fail:
|
|
; 3. The command has failed.
|
|
; Retry the same request up to 3 times with 10ms delay;
|
|
; if limit of retries is not reached, exit from the function.
|
|
; Otherwise, go to 4.
|
|
inc [edx+usb_unit_data.UnitReadyAttempts]
|
|
cmp [edx+usb_unit_data.UnitReadyAttempts], 3
|
|
jz @f
|
|
push ecx edx esi
|
|
movi esi, 10
|
|
call Sleep
|
|
pop esi edx ecx
|
|
stdcall queue_request, ecx, test_unit_ready_req, 0, test_unit_ready_callback, edx
|
|
ret 8
|
|
@@:
|
|
DEBUGF 1,'K : media not ready\n'
|
|
.inquiry:
|
|
; 4. initiate INQUIRY request.
|
|
lea eax, [ecx+usb_device_data.InquiryData]
|
|
stdcall queue_request, ecx, inquiry_req, eax, inquiry_callback, edx
|
|
ret 8
|
|
endp
|
|
|
|
; Temporary thread for initial actions with a new disk device.
|
|
proc new_disk_thread
|
|
sub esp, 32
|
|
virtual at esp
|
|
.name rb 32 ; device name
|
|
.param dd ? ; contents of edx at the moment of int 0x40/eax=51
|
|
dd ? ; stack segment
|
|
end virtual
|
|
; We are ready to notify the kernel about a new disk device.
|
|
mov esi, [.param]
|
|
; 1. Generate name.
|
|
; 1a. Find a free index.
|
|
mov ecx, free_numbers_lock
|
|
call MutexLock
|
|
xor eax, eax
|
|
@@:
|
|
bsf edx, [free_numbers+eax]
|
|
jnz @f
|
|
add eax, 4
|
|
cmp eax, 4*4
|
|
jnz @b
|
|
call MutexUnlock
|
|
push esi
|
|
mov esi, noindex
|
|
call SysMsgBoardStr
|
|
pop esi
|
|
jmp .drop_reference
|
|
@@:
|
|
; 1b. Mark the index as busy.
|
|
btr [free_numbers+eax], edx
|
|
lea eax, [eax*8+edx]
|
|
push eax
|
|
call MutexUnlock
|
|
pop eax
|
|
; 1c. Generate a name of the form "usbhd<index>" in the stack.
|
|
mov dword [esp], 'usbh'
|
|
lea edi, [esp+5]
|
|
mov byte [edi-1], 'd'
|
|
push eax
|
|
push -'0'
|
|
movi ecx, 10
|
|
@@:
|
|
cdq
|
|
div ecx
|
|
push edx
|
|
test eax, eax
|
|
jnz @b
|
|
@@:
|
|
pop eax
|
|
add al, '0'
|
|
stosb
|
|
jnz @b
|
|
pop ecx
|
|
mov edx, esp
|
|
; 3d. Store the index in usb_unit_data to free it later.
|
|
mov [esi+usb_unit_data.DiskIndex], cl
|
|
; 4. Notify the kernel about a new disk.
|
|
; 4a. Add a disk.
|
|
; stdcall queue_request, ecx, read_capacity_req, eax, read_capacity_callback, eax
|
|
stdcall DiskAdd, disk_functions, edx, esi, 0
|
|
mov ebx, eax
|
|
; 4b. If it failed, release the index and do nothing.
|
|
test eax, eax
|
|
jz .free_index
|
|
; 4c. Notify the kernel that a media is present.
|
|
stdcall DiskMediaChanged, eax, 1
|
|
; 5. Lock the requests queue, check that device is not disconnected,
|
|
; store the disk handle, unlock the requests queue.
|
|
mov ecx, [esi+usb_unit_data.Parent]
|
|
add ecx, usb_device_data.QueueLock
|
|
call MutexLock
|
|
cmp byte [ecx+usb_device_data.DeviceDisconnected-usb_device_data.QueueLock], 0
|
|
jnz .disconnected
|
|
mov [esi+usb_unit_data.DiskDevice], ebx
|
|
call MutexUnlock
|
|
jmp .exit
|
|
.disconnected:
|
|
call MutexUnlock
|
|
stdcall disk_close, ebx
|
|
jmp .exit
|
|
.free_index:
|
|
mov ecx, free_numbers_lock
|
|
call MutexLock
|
|
movzx eax, [esi+usb_unit_data.DiskIndex]
|
|
bts [free_numbers], eax
|
|
call MutexUnlock
|
|
.drop_reference:
|
|
mov esi, [esi+usb_unit_data.Parent]
|
|
lock dec [esi+usb_device_data.NumReferences]
|
|
jnz .exit
|
|
mov eax, [esi+usb_device_data.LogicalDevices]
|
|
call Kfree
|
|
xchg eax, esi
|
|
call Kfree
|
|
.exit:
|
|
or eax, -1
|
|
int 0x40
|
|
endp
|
|
|
|
; This function is called when the device is disconnected.
|
|
proc DeviceDisconnected
|
|
push ebx esi
|
|
virtual at esp
|
|
rd 2 ; saved registers
|
|
dd ? ; return address
|
|
.device dd ?
|
|
end virtual
|
|
; 1. Say a message.
|
|
mov esi, disconnectmsg
|
|
call SysMsgBoardStr
|
|
; 2. Lock the requests queue, set .DeviceDisconnected to 1,
|
|
; unlock the requests queue.
|
|
; Locking is required for synchronization with queue_request:
|
|
; all USB callbacks are executed in the same thread and are
|
|
; synchronized automatically, but queue_request can be running
|
|
; from any thread which wants to do something with a filesystem.
|
|
; Without locking, it would be possible that queue_request has
|
|
; been started, has checked that device is not yet disconnected,
|
|
; then DeviceDisconnected completes and all handles become invalid,
|
|
; then queue_request tries to use them.
|
|
mov esi, [.device]
|
|
lea ecx, [esi+usb_device_data.QueueLock]
|
|
call MutexLock
|
|
mov [esi+usb_device_data.DeviceDisconnected], 1
|
|
call MutexUnlock
|
|
; 3. Drop one reference to the structure and check whether
|
|
; that was the last reference.
|
|
lock dec [esi+usb_device_data.NumReferences]
|
|
jz .free
|
|
; 4. If not, there are some additional references due to disk devices;
|
|
; notify the kernel that those disks are deleted.
|
|
; Note that new disks cannot be added while we are looping here,
|
|
; because new_disk_thread checks for .DeviceDisconnected.
|
|
mov ebx, [esi+usb_device_data.MaxLUN]
|
|
mov esi, [esi+usb_device_data.LogicalDevices]
|
|
inc ebx
|
|
.diskdel:
|
|
mov eax, [esi+usb_unit_data.DiskDevice]
|
|
test eax, eax
|
|
jz @f
|
|
stdcall DiskDel, eax
|
|
@@:
|
|
add esi, usb_unit_data.sizeof
|
|
dec ebx
|
|
jnz .diskdel
|
|
; In this case, some operations with those disks are still possible,
|
|
; so we can't do anything more now. disk_close will take care of the rest.
|
|
.return:
|
|
pop esi ebx
|
|
ret 4
|
|
; 5. If there are no disk devices, free all resources which were allocated.
|
|
.free:
|
|
mov eax, [esi+usb_device_data.LogicalDevices]
|
|
test eax, eax
|
|
jz @f
|
|
call Kfree
|
|
@@:
|
|
xchg eax, esi
|
|
call Kfree
|
|
jmp .return
|
|
endp
|
|
|
|
; Disk functions.
|
|
DISK_STATUS_OK = 0 ; success
|
|
DISK_STATUS_GENERAL_ERROR = -1; if no other code is suitable
|
|
DISK_STATUS_INVALID_CALL = 1 ; invalid input parameters
|
|
DISK_STATUS_NO_MEDIA = 2 ; no media present
|
|
DISK_STATUS_END_OF_MEDIA = 3 ; end of media while reading/writing data
|
|
|
|
; Called when all operations with the given disk are done.
|
|
proc disk_close
|
|
push ebx esi
|
|
virtual at esp
|
|
rd 2 ; saved registers
|
|
dd ? ; return address
|
|
.userdata dd ?
|
|
end virtual
|
|
mov esi, [.userdata]
|
|
mov ecx, free_numbers_lock
|
|
call MutexLock
|
|
movzx eax, [esi+usb_unit_data.DiskIndex]
|
|
bts [free_numbers], eax
|
|
call MutexUnlock
|
|
mov esi, [esi+usb_unit_data.Parent]
|
|
lock dec [esi+usb_device_data.NumReferences]
|
|
jnz .nothing
|
|
mov eax, [esi+usb_device_data.LogicalDevices]
|
|
call Kfree
|
|
xchg eax, esi
|
|
call Kfree
|
|
.nothing:
|
|
pop esi ebx
|
|
ret 4
|
|
endp
|
|
|
|
; Returns sector size, capacity and flags of the media.
|
|
proc disk_querymedia stdcall uses ebx esi edi, \
|
|
userdata:dword, mediainfo:dword
|
|
; 1. Create event for waiting.
|
|
xor esi, esi
|
|
xor ecx, ecx
|
|
call CreateEvent
|
|
test eax, eax
|
|
jz .generic_fail
|
|
push eax
|
|
push edx
|
|
push ecx
|
|
push 0
|
|
push 0
|
|
virtual at ebp-.localsize
|
|
.locals:
|
|
; two following dwords are the output of READ_CAPACITY
|
|
.LastLBABE dd ?
|
|
.SectorSizeBE dd ?
|
|
.Status dd ?
|
|
; two following dwords identify an event
|
|
.event_code dd ?
|
|
.event dd ?
|
|
rd 3 ; saved registers
|
|
.localsize = $ - .locals
|
|
dd ? ; saved ebp
|
|
dd ? ; return address
|
|
.userdata dd ?
|
|
.mediainfo dd ?
|
|
end virtual
|
|
; 2. Initiate SCSI READ_CAPACITY request.
|
|
mov eax, [userdata]
|
|
mov ecx, [eax+usb_unit_data.Parent]
|
|
mov edx, esp
|
|
stdcall queue_request, ecx, read_capacity_req, edx, read_capacity_callback, edx
|
|
; 3. Wait for event. This destroys it.
|
|
mov eax, [.event]
|
|
mov ebx, [.event_code]
|
|
call WaitEvent
|
|
; 4. Get the status and results.
|
|
pop ecx
|
|
bswap ecx ; .LastLBA
|
|
pop edx
|
|
bswap edx ; .SectorSize
|
|
pop eax ; .Status
|
|
; 5. If the request has completed successfully, store results.
|
|
test eax, eax
|
|
jnz @f
|
|
DEBUGF 1,'K : sector size is %d, last sector is %d\n',edx,ecx
|
|
mov ebx, [mediainfo]
|
|
mov [ebx], eax ; flags = 0
|
|
mov [ebx+4], edx ; sectorsize
|
|
add ecx, 1
|
|
adc eax, 0
|
|
mov [ebx+8], ecx
|
|
mov [ebx+12], eax ; capacity
|
|
mov eax, [userdata]
|
|
mov [eax+usb_unit_data.SectorSize], edx
|
|
xor eax, eax
|
|
@@:
|
|
; 6. Restore the stack and return.
|
|
pop ecx
|
|
pop ecx
|
|
ret
|
|
.generic_fail:
|
|
or eax, -1
|
|
ret
|
|
endp
|
|
|
|
; Builder for SCSI READ_CAPACITY request.
|
|
; edx = first argument = pointer to usb_device_data.Command,
|
|
; second argument = custom data given to queue_request,
|
|
; pointer to disk_querymedia.locals.
|
|
proc read_capacity_req
|
|
mov eax, [esp+8]
|
|
mov eax, [eax+disk_querymedia.userdata-disk_querymedia.locals]
|
|
mov al, [eax+usb_unit_data.LUN]
|
|
mov [edx+command_block_wrapper.Length], 8
|
|
mov [edx+command_block_wrapper.Flags], CBW_FLAG_IN
|
|
mov [edx+command_block_wrapper.LUN], al
|
|
mov byte [edx+command_block_wrapper.Command+0], SCSI_READ_CAPACITY
|
|
ret 8
|
|
endp
|
|
|
|
; Called when SCSI READ_CAPACITY request is completed.
|
|
proc read_capacity_callback
|
|
; Transform the status to return value of disk_querymedia
|
|
; and set the event.
|
|
mov ecx, [esp+4]
|
|
xor eax, eax
|
|
cmp [ecx+usb_device_data.Status.Status], al
|
|
jz @f
|
|
or eax, -1
|
|
@@:
|
|
mov ecx, [esp+8]
|
|
mov [ecx+disk_querymedia.Status-disk_querymedia.locals], eax
|
|
push ebx esi edi
|
|
mov eax, [ecx+disk_querymedia.event-disk_querymedia.locals]
|
|
mov ebx, [ecx+disk_querymedia.event_code-disk_querymedia.locals]
|
|
xor edx, edx
|
|
xor esi, esi
|
|
call RaiseEvent
|
|
pop edi esi ebx
|
|
ret 8
|
|
endp
|
|
|
|
disk_write:
|
|
mov al, SCSI_WRITE10
|
|
jmp disk_read_write
|
|
|
|
disk_read:
|
|
mov al, SCSI_READ10
|
|
|
|
; Reads from the device or writes to the device.
|
|
proc disk_read_write stdcall uses ebx esi edi, \
|
|
userdata:dword, buffer:dword, startsector:qword, numsectors:dword
|
|
; 1. Initialize.
|
|
push eax ; .command
|
|
mov eax, [userdata]
|
|
mov eax, [eax+usb_unit_data.SectorSize]
|
|
push eax ; .SectorSize
|
|
push 0 ; .processed
|
|
mov eax, [numsectors]
|
|
mov eax, [eax]
|
|
; 2. The transfer length for SCSI_{READ,WRITE}10 commands can not be greater
|
|
; than 0xFFFF, so split the request to slices with <= 0xFFFF sectors.
|
|
max_sectors_at_time = 0xFFFF
|
|
.split:
|
|
push eax ; .length_rest
|
|
cmp eax, max_sectors_at_time
|
|
jb @f
|
|
mov eax, max_sectors_at_time
|
|
@@:
|
|
sub [esp], eax
|
|
push eax ; .length_cur
|
|
; 3. startsector must fit in 32 bits, otherwise abort the request.
|
|
cmp dword [startsector+4], 0
|
|
jnz .generic_fail
|
|
; 4. Create event for waiting.
|
|
xor esi, esi
|
|
xor ecx, ecx
|
|
call CreateEvent
|
|
test eax, eax
|
|
jz .generic_fail
|
|
push eax ; .event
|
|
push edx ; .event_code
|
|
push ecx ; .status
|
|
virtual at ebp-.localsize
|
|
.locals:
|
|
.status dd ?
|
|
.event_code dd ?
|
|
.event dd ?
|
|
.length_cur dd ?
|
|
.length_rest dd ?
|
|
.processed dd ?
|
|
.SectorSize dd ?
|
|
.command db ?
|
|
rb 3
|
|
rd 3 ; saved registers
|
|
.localsize = $ - .locals
|
|
dd ? ; saved ebp
|
|
dd ? ; return address
|
|
.userdata dd ?
|
|
.buffer dd ?
|
|
.startsector dq ?
|
|
.numsectors dd ?
|
|
end virtual
|
|
; 5. Initiate SCSI READ10 or WRITE10 request.
|
|
mov eax, [userdata]
|
|
mov ecx, [eax+usb_unit_data.Parent]
|
|
stdcall queue_request, ecx, read_write_req, [buffer], read_write_callback, esp
|
|
; 6. Wait for event. This destroys it.
|
|
mov eax, [.event]
|
|
mov ebx, [.event_code]
|
|
call WaitEvent
|
|
; 7. Get the status. If the operation has failed, abort.
|
|
pop eax ; .status
|
|
pop ecx ecx ; cleanup .event_code, .event
|
|
pop ecx ; .length_cur
|
|
test eax, eax
|
|
jnz .return
|
|
; 8. Otherwise, continue the loop started at step 2.
|
|
add dword [startsector], ecx
|
|
adc dword [startsector+4], eax
|
|
imul ecx, [.SectorSize]
|
|
add [buffer], ecx
|
|
pop eax
|
|
test eax, eax
|
|
jnz .split
|
|
push eax
|
|
.return:
|
|
; 9. Restore the stack, store .processed to [numsectors], return.
|
|
pop ecx ; .length_rest
|
|
pop ecx ; .processed
|
|
mov edx, [numsectors]
|
|
mov [edx], ecx
|
|
pop ecx ; .SectorSize
|
|
pop ecx ; .command
|
|
ret
|
|
.generic_fail:
|
|
or eax, -1
|
|
pop ecx ; .length_cur
|
|
jmp .return
|
|
endp
|
|
|
|
; Builder for SCSI READ10 or WRITE10 request.
|
|
; edx = first argument = pointer to usb_device_data.Command,
|
|
; second argument = custom data given to queue_request,
|
|
; pointer to disk_read_write.locals.
|
|
proc read_write_req
|
|
mov eax, [esp+8]
|
|
mov ecx, [eax+disk_read_write.userdata-disk_read_write.locals]
|
|
mov cl, [ecx+usb_unit_data.LUN]
|
|
mov [edx+command_block_wrapper.LUN], cl
|
|
mov ecx, [eax+disk_read_write.length_cur-disk_read_write.locals]
|
|
imul ecx, [eax+disk_read_write.SectorSize-disk_read_write.locals]
|
|
mov [edx+command_block_wrapper.Length], ecx
|
|
mov cl, [eax+disk_read_write.command-disk_read_write.locals]
|
|
mov [edx+command_block_wrapper.Flags], CBW_FLAG_OUT
|
|
cmp cl, SCSI_READ10
|
|
jnz @f
|
|
mov [edx+command_block_wrapper.Flags], CBW_FLAG_IN
|
|
@@:
|
|
mov byte [edx+command_block_wrapper.Command], cl
|
|
mov ecx, dword [eax+disk_read_write.startsector-disk_read_write.locals]
|
|
bswap ecx
|
|
mov dword [edx+command_block_wrapper.Command+2], ecx
|
|
mov ecx, [eax+disk_read_write.length_cur-disk_read_write.locals]
|
|
xchg cl, ch
|
|
mov word [edx+command_block_wrapper.Command+7], cx
|
|
ret 8
|
|
endp
|
|
|
|
; Called when SCSI READ10 or WRITE10 request is completed.
|
|
proc read_write_callback
|
|
; 1. Initialize.
|
|
push ebx esi edi
|
|
virtual at esp
|
|
rd 3 ; saved registers
|
|
dd ? ; return address
|
|
.device dd ?
|
|
.calldata dd ?
|
|
end virtual
|
|
mov ecx, [.device]
|
|
mov esi, [.calldata]
|
|
; 2. Get the number of sectors which were read.
|
|
; If the status is OK or FAIL, the field .LengthRest is valid.
|
|
; Otherwise, it is invalid, so assume zero sectors.
|
|
xor eax, eax
|
|
cmp [ecx+usb_device_data.Status.Status], CSW_STATUS_FAIL
|
|
ja .sectors_calculated
|
|
mov eax, [ecx+usb_device_data.LengthRest]
|
|
xor edx, edx
|
|
div [esi+disk_read_write.SectorSize-disk_read_write.locals]
|
|
test edx, edx
|
|
jz @f
|
|
inc eax
|
|
@@:
|
|
mov edx, eax
|
|
mov eax, [esi+disk_read_write.length_cur-disk_read_write.locals]
|
|
sub eax, edx
|
|
jae .sectors_calculated
|
|
xor eax, eax
|
|
.sectors_calculated:
|
|
; 3. Increase the total number of processed sectors.
|
|
add [esi+disk_read_write.processed-disk_read_write.locals], eax
|
|
; 4. Set status to OK if all sectors were read, to ERROR otherwise.
|
|
cmp eax, [esi+disk_read_write.length_cur-disk_read_write.locals]
|
|
setz al
|
|
movzx eax, al
|
|
dec eax
|
|
mov [esi+disk_read_write.status-disk_read_write.locals], eax
|
|
; 5. Set the event.
|
|
mov eax, [esi+disk_read_write.event-disk_read_write.locals]
|
|
mov ebx, [esi+disk_read_write.event_code-disk_read_write.locals]
|
|
xor edx, edx
|
|
xor esi, esi
|
|
call RaiseEvent
|
|
; 6. Return.
|
|
pop edi esi ebx
|
|
ret 8
|
|
endp
|
|
|
|
; strings
|
|
my_driver db 'usbstor',0
|
|
disconnectmsg db 'K : USB mass storage device disconnected',13,10,0
|
|
nomemory db 'K : no memory',13,10,0
|
|
unkdevice db 'K : unknown mass storage device',13,10,0
|
|
okdevice db 'K : USB mass storage device detected',13,10,0
|
|
transfererror db 'K : USB transfer error, disabling mass storage',13,10,0
|
|
invresponse db 'K : invalid response from mass storage device',13,10,0
|
|
fatalerr db 'K : mass storage device reports fatal error',13,10,0
|
|
inquiry_fail db 'K : INQUIRY command failed',13,10,0
|
|
;read_capacity_fail db 'K : READ CAPACITY command failed',13,10,0
|
|
;read_fail db 'K : READ command failed',13,10,0
|
|
noindex db 'K : failed to generate disk name',13,10,0
|
|
|
|
; Exported variable: kernel API version.
|
|
align 4
|
|
version dd 50005h
|
|
; Structure with callback functions.
|
|
usb_functions:
|
|
dd usb_functions_end - usb_functions
|
|
dd AddDevice
|
|
dd DeviceDisconnected
|
|
usb_functions_end:
|
|
|
|
disk_functions:
|
|
dd disk_functions_end - disk_functions
|
|
dd disk_close
|
|
dd 0 ; closemedia
|
|
dd disk_querymedia
|
|
dd disk_read
|
|
dd disk_write
|
|
dd 0 ; flush
|
|
dd 0 ; adjust_cache_size: use default cache
|
|
disk_functions_end:
|
|
|
|
free_numbers_lock rd 3
|
|
; 128 devices should be enough for everybody
|
|
free_numbers dd -1, -1, -1, -1
|
|
|
|
; for DEBUGF macro
|
|
include_debug_strings
|
|
|
|
; for uninitialized data
|
|
section '.data' data readable writable align 16
|