kolibrios/drivers/video/drm/i915/i915_dma.c
Sergey Semyonov (Serge) 8ffe856896 parse vbios
git-svn-id: svn://kolibrios.org@2327 a494cfbc-eb01-0410-851d-a64ba20cac60
2011-12-24 07:03:24 +00:00

501 lines
14 KiB
C

/* i915_dma.c -- DMA support for the I915 -*- linux-c -*-
*/
/*
* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
* IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
* ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
*/
#include "drmP.h"
#include "drm.h"
#include "drm_crtc_helper.h"
#include "drm_fb_helper.h"
#include "intel_drv.h"
//#include "i915_drm.h"
#include "i915_drv.h"
#include <drm/intel-gtt.h>
//#include "i915_trace.h"
//#include "../../../platform/x86/intel_ips.h"
#include <linux/pci.h>
//#include <linux/vgaarb.h>
//#include <linux/acpi.h>
//#include <linux/pnp.h>
//#include <linux/vga_switcheroo.h>
//#include <linux/slab.h>
//#include <acpi/video.h>
void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen);
static void i915_write_hws_pga(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
u32 addr;
addr = dev_priv->status_page_dmah->busaddr;
if (INTEL_INFO(dev)->gen >= 4)
addr |= (dev_priv->status_page_dmah->busaddr >> 28) & 0xf0;
I915_WRITE(HWS_PGA, addr);
}
/**
* Sets up the hardware status page for devices that need a physical address
* in the register.
*/
static int i915_init_phys_hws(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
/* Program Hardware Status Page */
dev_priv->status_page_dmah =
drm_pci_alloc(dev, PAGE_SIZE, PAGE_SIZE);
if (!dev_priv->status_page_dmah) {
DRM_ERROR("Can not allocate hardware status page\n");
return -ENOMEM;
}
i915_write_hws_pga(dev);
dbgprintf("Enabled hardware status page\n");
return 0;
}
static int i915_load_modeset_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
ret = intel_parse_bios(dev);
if (ret)
DRM_INFO("failed to find VBIOS tables\n");
// intel_register_dsm_handler();
/* IIR "flip pending" bit means done if this bit is set */
if (IS_GEN3(dev) && (I915_READ(ECOSKPD) & ECO_FLIP_DONE))
dev_priv->flip_pending_is_done = true;
intel_modeset_init(dev);
#if 0
ret = i915_load_gem_init(dev);
if (ret)
goto cleanup_vga_switcheroo;
intel_modeset_gem_init(dev);
ret = drm_irq_install(dev);
if (ret)
goto cleanup_gem;
/* Always safe in the mode setting case. */
/* FIXME: do pre/post-mode set stuff in core KMS code */
dev->vblank_disable_allowed = 1;
ret = intel_fbdev_init(dev);
if (ret)
goto cleanup_irq;
drm_kms_helper_poll_init(dev);
/* We're off and running w/KMS */
dev_priv->mm.suspended = 0;
#endif
return 0;
cleanup_irq:
// drm_irq_uninstall(dev);
cleanup_gem:
// mutex_lock(&dev->struct_mutex);
// i915_gem_cleanup_ringbuffer(dev);
// mutex_unlock(&dev->struct_mutex);
cleanup_vga_switcheroo:
// vga_switcheroo_unregister_client(dev->pdev);
cleanup_vga_client:
// vga_client_register(dev->pdev, NULL, NULL, NULL);
out:
return ret;
}
static void i915_pineview_get_mem_freq(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
u32 tmp;
tmp = I915_READ(CLKCFG);
switch (tmp & CLKCFG_FSB_MASK) {
case CLKCFG_FSB_533:
dev_priv->fsb_freq = 533; /* 133*4 */
break;
case CLKCFG_FSB_800:
dev_priv->fsb_freq = 800; /* 200*4 */
break;
case CLKCFG_FSB_667:
dev_priv->fsb_freq = 667; /* 167*4 */
break;
case CLKCFG_FSB_400:
dev_priv->fsb_freq = 400; /* 100*4 */
break;
}
switch (tmp & CLKCFG_MEM_MASK) {
case CLKCFG_MEM_533:
dev_priv->mem_freq = 533;
break;
case CLKCFG_MEM_667:
dev_priv->mem_freq = 667;
break;
case CLKCFG_MEM_800:
dev_priv->mem_freq = 800;
break;
}
/* detect pineview DDR3 setting */
tmp = I915_READ(CSHRDDR3CTL);
dev_priv->is_ddr3 = (tmp & CSHRDDR3CTL_DDR3) ? 1 : 0;
}
static void i915_ironlake_get_mem_freq(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
u16 ddrpll, csipll;
ddrpll = I915_READ16(DDRMPLL1);
csipll = I915_READ16(CSIPLL0);
switch (ddrpll & 0xff) {
case 0xc:
dev_priv->mem_freq = 800;
break;
case 0x10:
dev_priv->mem_freq = 1066;
break;
case 0x14:
dev_priv->mem_freq = 1333;
break;
case 0x18:
dev_priv->mem_freq = 1600;
break;
default:
DRM_DEBUG_DRIVER("unknown memory frequency 0x%02x\n",
ddrpll & 0xff);
dev_priv->mem_freq = 0;
break;
}
dev_priv->r_t = dev_priv->mem_freq;
switch (csipll & 0x3ff) {
case 0x00c:
dev_priv->fsb_freq = 3200;
break;
case 0x00e:
dev_priv->fsb_freq = 3733;
break;
case 0x010:
dev_priv->fsb_freq = 4266;
break;
case 0x012:
dev_priv->fsb_freq = 4800;
break;
case 0x014:
dev_priv->fsb_freq = 5333;
break;
case 0x016:
dev_priv->fsb_freq = 5866;
break;
case 0x018:
dev_priv->fsb_freq = 6400;
break;
default:
DRM_DEBUG_DRIVER("unknown fsb frequency 0x%04x\n",
csipll & 0x3ff);
dev_priv->fsb_freq = 0;
break;
}
if (dev_priv->fsb_freq == 3200) {
dev_priv->c_m = 0;
} else if (dev_priv->fsb_freq > 3200 && dev_priv->fsb_freq <= 4800) {
dev_priv->c_m = 1;
} else {
dev_priv->c_m = 2;
}
}
static int i915_get_bridge_dev(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
dev_priv->bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0,0));
if (!dev_priv->bridge_dev) {
DRM_ERROR("bridge device not found\n");
return -1;
}
return 0;
}
/* Global for IPS driver to get at the current i915 device */
static struct drm_i915_private *i915_mch_dev;
/*
* Lock protecting IPS related data structures
* - i915_mch_dev
* - dev_priv->max_delay
* - dev_priv->min_delay
* - dev_priv->fmax
* - dev_priv->gpu_busy
*/
static DEFINE_SPINLOCK(mchdev_lock);
/**
* i915_driver_load - setup chip and create an initial config
* @dev: DRM device
* @flags: startup flags
*
* The driver load routine has to do several things:
* - drive output discovery via intel_modeset_init()
* - initialize the memory manager
* - allocate initial config memory
* - setup the DRM framebuffer with the allocated memory
*/
int i915_driver_load(struct drm_device *dev, unsigned long flags)
{
struct drm_i915_private *dev_priv;
int ret = 0, mmio_bar;
uint32_t agp_size;
ENTER();
dev_priv = kzalloc(sizeof(drm_i915_private_t), GFP_KERNEL);
if (dev_priv == NULL)
return -ENOMEM;
dev->dev_private = (void *)dev_priv;
dev_priv->dev = dev;
dev_priv->info = (struct intel_device_info *) flags;
if (i915_get_bridge_dev(dev)) {
ret = -EIO;
goto free_priv;
}
/* overlay on gen2 is broken and can't address above 1G */
// if (IS_GEN2(dev))
// dma_set_coherent_mask(&dev->pdev->dev, DMA_BIT_MASK(30));
/* 965GM sometimes incorrectly writes to hardware status page (HWS)
* using 32bit addressing, overwriting memory if HWS is located
* above 4GB.
*
* The documentation also mentions an issue with undefined
* behaviour if any general state is accessed within a page above 4GB,
* which also needs to be handled carefully.
*/
// if (IS_BROADWATER(dev) || IS_CRESTLINE(dev))
// dma_set_coherent_mask(&dev->pdev->dev, DMA_BIT_MASK(32));
mmio_bar = IS_GEN2(dev) ? 1 : 0;
dev_priv->regs = pci_iomap(dev->pdev, mmio_bar, 0);
if (!dev_priv->regs) {
DRM_ERROR("failed to map registers\n");
ret = -EIO;
goto put_bridge;
}
dev_priv->mm.gtt = intel_gtt_get();
if (!dev_priv->mm.gtt) {
DRM_ERROR("Failed to initialize GTT\n");
ret = -ENODEV;
goto out_rmmap;
}
// agp_size = dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT;
/* agp_bridge->gart_bus_addr = intel_private.gma_bus_addr; */
// dev_priv->mm.gtt_mapping =
// io_mapping_create_wc(dev->agp->base, agp_size);
// if (dev_priv->mm.gtt_mapping == NULL) {
// ret = -EIO;
// goto out_rmmap;
// }
/* Set up a WC MTRR for non-PAT systems. This is more common than
* one would think, because the kernel disables PAT on first
* generation Core chips because WC PAT gets overridden by a UC
* MTRR if present. Even if a UC MTRR isn't present.
*/
// dev_priv->mm.gtt_mtrr = mtrr_add(dev->agp->base,
// agp_size,
// MTRR_TYPE_WRCOMB, 1);
// if (dev_priv->mm.gtt_mtrr < 0) {
// DRM_INFO("MTRR allocation failed. Graphics "
// "performance may suffer.\n");
// }
/* The i915 workqueue is primarily used for batched retirement of
* requests (and thus managing bo) once the task has been completed
* by the GPU. i915_gem_retire_requests() is called directly when we
* need high-priority retirement, such as waiting for an explicit
* bo.
*
* It is also used for periodic low-priority events, such as
* idle-timers and recording error state.
*
* All tasks on the workqueue are expected to acquire the dev mutex
* so there is no point in running more than one instance of the
* workqueue at any time: max_active = 1 and NON_REENTRANT.
*/
// dev_priv->wq = alloc_workqueue("i915",
// WQ_UNBOUND | WQ_NON_REENTRANT,
// 1);
// if (dev_priv->wq == NULL) {
// DRM_ERROR("Failed to create our workqueue.\n");
// ret = -ENOMEM;
// goto out_mtrrfree;
// }
/* enable GEM by default */
dev_priv->has_gem = 1;
// intel_irq_init(dev);
/* Try to make sure MCHBAR is enabled before poking at it */
// intel_setup_mchbar(dev);
intel_setup_gmbus(dev);
intel_opregion_setup(dev);
/* Make sure the bios did its job and set up vital registers */
// intel_setup_bios(dev);
i915_gem_load(dev);
/* Init HWS */
if (!I915_NEED_GFX_HWS(dev)) {
ret = i915_init_phys_hws(dev);
if (ret)
goto out_gem_unload;
}
if (IS_PINEVIEW(dev))
i915_pineview_get_mem_freq(dev);
else if (IS_GEN5(dev))
i915_ironlake_get_mem_freq(dev);
/* On the 945G/GM, the chipset reports the MSI capability on the
* integrated graphics even though the support isn't actually there
* according to the published specs. It doesn't appear to function
* correctly in testing on 945G.
* This may be a side effect of MSI having been made available for PEG
* and the registers being closely associated.
*
* According to chipset errata, on the 965GM, MSI interrupts may
* be lost or delayed, but we use them anyways to avoid
* stuck interrupts on some machines.
*/
// if (!IS_I945G(dev) && !IS_I945GM(dev))
// pci_enable_msi(dev->pdev);
spin_lock_init(&dev_priv->irq_lock);
spin_lock_init(&dev_priv->error_lock);
spin_lock_init(&dev_priv->rps_lock);
if (IS_MOBILE(dev) || !IS_GEN2(dev))
dev_priv->num_pipe = 2;
else
dev_priv->num_pipe = 1;
// ret = drm_vblank_init(dev, dev_priv->num_pipe);
// if (ret)
// goto out_gem_unload;
/* Start out suspended */
dev_priv->mm.suspended = 1;
intel_detect_pch(dev);
ret = i915_load_modeset_init(dev);
if (ret < 0) {
DRM_ERROR("failed to init modeset\n");
goto out_gem_unload;
}
/* Must be done after probing outputs */
// intel_opregion_init(dev);
// acpi_video_register();
// setup_timer(&dev_priv->hangcheck_timer, i915_hangcheck_elapsed,
// (unsigned long) dev);
spin_lock(&mchdev_lock);
i915_mch_dev = dev_priv;
dev_priv->mchdev_lock = &mchdev_lock;
spin_unlock(&mchdev_lock);
// ips_ping_for_i915_load();
LEAVE();
return 0;
out_gem_unload:
// if (dev_priv->mm.inactive_shrinker.shrink)
// unregister_shrinker(&dev_priv->mm.inactive_shrinker);
// if (dev->pdev->msi_enabled)
// pci_disable_msi(dev->pdev);
// intel_teardown_gmbus(dev);
// intel_teardown_mchbar(dev);
// destroy_workqueue(dev_priv->wq);
out_mtrrfree:
// if (dev_priv->mm.gtt_mtrr >= 0) {
// mtrr_del(dev_priv->mm.gtt_mtrr, dev->agp->base,
// dev->agp->agp_info.aper_size * 1024 * 1024);
// dev_priv->mm.gtt_mtrr = -1;
// }
// io_mapping_free(dev_priv->mm.gtt_mapping);
out_rmmap:
pci_iounmap(dev->pdev, dev_priv->regs);
put_bridge:
// pci_dev_put(dev_priv->bridge_dev);
free_priv:
kfree(dev_priv);
return ret;
}