kolibrios/drivers/video/rdc.asm
Sergey Semyonov (Serge) ff063f54ce kernel: combine display related data in one structure
git-svn-id: svn://kolibrios.org@5351 a494cfbc-eb01-0410-851d-a64ba20cac60
2015-01-05 17:59:03 +00:00

442 lines
14 KiB
NASM

; RDC M2010/M2012 video driver.
; Standard driver stuff
format PE DLL native at 0
entry start
__DEBUG__ equ 1
__DEBUG_LEVEL__ equ 1
section '.flat' readable writable executable
include '../proc32.inc'
include '../struct.inc'
include '../macros.inc'
include '../fdo.inc'
; Display-specific driver stuff
; Kernel passes to init_cursor cursors with fixed size 32x32
KERNEL_CURSOR_WIDTH = 32
KERNEL_CURSOR_HEIGHT = 32
; Constants for IOCTL codes
SRV_GETVERSION = 0
SRV_ENUM_MODES = 1
SRV_SET_MODE = 2
; Constants for SRV_GETVERSION result
CURRENT_API = 0x0200
COMPATIBLE_API = 0x0100
API_VERSION = (COMPATIBLE_API shl 16) + CURRENT_API
struct RWSEM
wait_list LHEAD
count dd ?
ends
; Some structures
struct display_t
x dd ?
y dd ?
width dd ?
height dd ?
bits_per_pixel dd ?
vrefresh dd ?
lfb dd ?
lfb_pitch dd ?
win_map_lock RWSEM
win_map dd ?
win_map_pitch dd ?
win_map_size dd ?
modes dd ?
ddev dd ?
connector dd ?
crtc dd ?
cr_list.next dd ?
cr_list.prev dd ?
cursor dd ?
init_cursor dd ?
select_cursor dd ?
show_cursor dd ?
move_cursor dd ?
restore_cursor dd ?
disable_mouse dd ?
mask_seqno dd ?
check_mouse dd ?
check_m_pixel dd ?
bytes_per_pixel dd ?
ends
struct APPOBJ ; common object header
magic dd ? ;
destroy dd ? ; internal destructor
fd dd ? ; next object in list
bk dd ? ; prev object in list
pid dd ? ; owner id
ends
struct CURSOR APPOBJ
base dd ? ;allocated memory
hot_x dd ? ;hotspot coords
hot_y dd ?
list_next dd ? ;next cursor in cursor list
list_prev dd ? ;prev cursor in cursor list
dev_obj dd ? ;device depended data
ends
; Constants specific to our drivers
; We are handling two videocards: M2010 and M2012
PCI_VENDOR_RDC = 0x17F3
; I like this approach to select device IDs!
PCI_CHIP_M2010 = 0x2010
PCI_CHIP_M2012 = 0x2012
; I/O ports for CRT registers
COLOR_CRTC_INDEX = 0x3D4
COLOR_CRTC_DATA = 0x3D5
; The value that unlocks extended CRT registers:
; index 0x80, value 0xA8
ENABLE_EXTENDED_REGS = 0xA880
; Hardware cursors have size 64x64
HW_CURSOR_WIDTH = 64
HW_CURSOR_HEIGHT = 64
; Multiplication to powers of two can be replaced with shifts,
; x*HW_CURSOR_WIDTH = x shl HW_CURSOR_WIDTH_SHIFT
HW_CURSOR_WIDTH_SHIFT = 6
HW_CURSOR_HEIGHT_SHIFT = 6
; MMIO registers responsible for hardware cursor, see PRM
HWC_MMIO_CTRL = 0x580
HWC_MMIO_OFFSET = 0x584
HWC_MMIO_POSITION = 0x588
HWC_MMIO_ADDRESS = 0x58C
; Data for hardware cursors must be stored in videomemory,
; so we need an allocator for objects inside videomemory.
; Currently, we just reserve a fixed amount of memory for cursors
; (cursor size is the same for all cursors) and keep a bitfield
; that describes free blocks. 32 bits fit nicely in one dword.
MAX_CURSORS = 32
; === Entry points for external code ===
; Called once when driver is loading and once at shutdown.
; When loading, must initialize itself, register itself in the system
; and return eax = value obtained when registering.
; Cdecl with two parameters.
proc start
push ebx esi ; save used registers to be stdcall
virtual at esp
rd 2 ; saved registers
dd ? ; return address
.reason dd ? ; DRV_ENTRY or DRV_EXIT
.cmdline dd ? ; normally NULL
end virtual
; 1. Check the reason for the call, do nothing unless initializing.
cmp [.reason], DRV_ENTRY
jnz .nothing
; 2. Find the PCI device for our videocard.
; If not found, just return zero.
invoke GetPCIList
mov ebx, eax
.look_pcidev_loop:
mov ebx, [ebx+PCIDEV.fd]
cmp ebx, eax
jz .pcidev_notfound
cmp [ebx+PCIDEV.vendor_device_id], PCI_VENDOR_RDC + (PCI_CHIP_M2010 shl 16)
jz .pcidev_found
cmp [ebx+PCIDEV.vendor_device_id], PCI_VENDOR_RDC + (PCI_CHIP_M2012 shl 16)
jnz .look_pcidev_loop
.pcidev_found:
; 3. Get addresses, sizes and pointers from the hardware.
; 3a. Create mapping for MMIO.
invoke PciRead32, dword [ebx+PCIDEV.bus], dword [ebx+PCIDEV.devfn], 14h
and al, not 0xF
invoke MapIoMem, eax, 10000h, PG_NOCACHE+PG_SW
test eax, eax
jz .nothing
mov [mmio], eax
; 3b. Get videomemory size. It is stored in 3 lower bits of 0xAA extended register
; logarithmically started with 8Mb.
mov dx, COLOR_CRTC_INDEX
mov ax, ENABLE_EXTENDED_REGS
out dx, ax
mov al, 0xAA
out dx, al
inc edx
in al, dx
and eax, 7
mov ecx, eax
mov eax, 8 shl 20
shl eax, cl
mov [video_mem_size], eax
; 3c. Reserve area for cursors in the last part of videomemory.
sub eax, MAX_CURSORS * HW_CURSOR_WIDTH * HW_CURSOR_HEIGHT * 4
mov [cursors_base_offset], eax
; 3d. Create mapping for part of videomemory that we have reserved for cursors.
; Note: we can't just use system-wide mapping at 0xFE000000, it is too short.
invoke PciRead32, dword [ebx+PCIDEV.bus], dword [ebx+PCIDEV.devfn], 10h
and al, not 0xF
add eax, [cursors_base_offset]
invoke MapIoMem, eax, MAX_CURSORS * HW_CURSOR_WIDTH * HW_CURSOR_HEIGHT * 4, PG_SW
test eax, eax
jz .nothing
mov [cursors_base_va], eax
; 4. Install cursor handlers.
; 4a. Get pointer to the structure that keeps everything display-related.
invoke GetDisplay
mov ebx, eax
; 4b. Make sure that no one tries to use partially-changed structure.
pushf
cli
; 4c. Ask the previous handler to restore image hidden beyond cursor.
stdcall [ebx+display_t.restore_cursor], 0, 0
; 4d. Store pointers to our functions.
mov [ebx+display_t.init_cursor], init_cursor
mov [ebx+display_t.select_cursor], select_cursor
mov [ebx+display_t.show_cursor], 0
mov [ebx+display_t.move_cursor], move_cursor
mov [ebx+display_t.restore_cursor], restore_cursor
mov [ebx+display_t.disable_mouse], disable_mouse
; 4e. The kernel will pass all new cursors to our init_cursor,
; but we must process already created cursors ourselves to be able to
; select_cursor them when requested. Do it now: pass every cursor
; in the list display_t.cr_list to init_cursor.
add ebx, display_t.cr_list.next
mov esi, ebx
.init_old_cursors_loop:
mov esi, [esi]
cmp esi, ebx
jz .init_old_cursors_done
lea eax, [esi-CURSOR.list_next]
push eax
call init_cursor
pop eax
jmp .init_old_cursors_loop
.init_old_cursors_done:
; 4f. Setup the current cursor.
stdcall move_cursor, [ebx+display_t.cursor-display_t.cr_list.next], 0, 0
stdcall select_cursor, [ebx+display_t.cursor-display_t.cr_list.next]
; 4g. It is safe now to work with display structure; restore after 4b.
popf
; 5. Say something happy to the (curious) user.
mov esi, success_msg
invoke SysMsgBoardStr
; 6. Register ourselves as a service.
; Note: not really needed currently as we don't do any useful in ioctl_handler,
; but do it nevertheless for future expansion.
invoke RegService, rdc_name, ioctl_handler
.nothing:
pop esi ebx ; restore used registers to be stdcall
ret
.pcidev_notfound:
xor eax, eax
jmp .nothing
endp
; Service procedure for the driver - handle all IOCTL requests for the driver.
; Stdcall with one parameter.
proc ioctl_handler
virtual at esp
dd ? ; return address
.ioctl dd ?
end virtual
; Not very useful currently - just return API_VERSION as a response to SRV_GETVERSION = 0.
mov edx, [.ioctl]
mov eax, [edx+IOCTL.io_code]
test eax, eax
jz .getversion
.error:
or eax, -1 ; fail everything unknown
retn 4
.getversion:
cmp [edx+IOCTL.out_size], 4
jnz .error
mov eax, [edx+IOCTL.output]
mov dword [eax], API_VERSION
xor eax, eax
retn 4
endp
; === Cursors ===
; This function is called when an application registers a new cursor.
; Cdecl with one parameter, return value ignored.
proc init_cursor
push esi edi
virtual at esp
rd 2 ; saved registers
dd ? ; return address
.cursor dd ?
end virtual
; We store one specific dword in CURSOR.dev_obj,
; index in cursors area from 0 to NUM_CURSORS-1, or -1 for error.
; 1. Prepare: store -1 to CURSOR.dev_obj and pointer to destroy function.
mov edx, [.cursor]
mov [edx+CURSOR.dev_obj], -1
mov [edx+CURSOR.destroy], destroy_cursor
; 2. Allocate videomemory.
bsr edi, [free_cursors]
jz .nocopy
btr [free_cursors], edi
; 3. Store the allocated item to CURSOR.dev_obj.
mov [edx+CURSOR.dev_obj], edi
; 4. Copy data from kernel-provided cursor to videomemory,
; transforming KERNEL_CURSOR_WIDTH*KERNEL_CURSOR_HEIGHT*(4 bytes RGBA) to
; HW_CURSOR_WIDTH*HW_CURSOR_HEIGHT*(4 bytes RGBA).
shl edi, HW_CURSOR_WIDTH_SHIFT + HW_CURSOR_HEIGHT_SHIFT + 2
add edi, [cursors_base_va]
mov esi, [edx+CURSOR.base]
push KERNEL_CURSOR_HEIGHT
xor eax, eax
@@:
mov ecx, KERNEL_CURSOR_WIDTH
rep movsd
mov ecx, HW_CURSOR_WIDTH - KERNEL_CURSOR_WIDTH
rep stosd
dec dword [esp]
jnz @b
pop ecx
mov ecx, HW_CURSOR_WIDTH * (HW_CURSOR_HEIGHT - KERNEL_CURSOR_HEIGHT)
rep stosd
.nocopy:
; 5. We don't need kernel-provided data anymore; free it now.
invoke KernelFree, [edx+CURSOR.base]
pop edi esi
ret
endp
; This function is called when a thread that has created a cursor
; is terminating and we need to free the cursor.
proc destroy_cursor
; 1. Free allocated videomemory.
mov edx, [eax+CURSOR.dev_obj]
test edx, edx
js .nofree
bts [free_cursors], edx
.nofree:
; 2. Remove the cursor from the overall list at display_t.cr_list.
pushf
cli
mov ecx, [eax+CURSOR.list_next]
mov edx, [eax+CURSOR.list_prev]
mov [ecx+4], edx
mov [edx], ecx
popf
; 3. Free memory allocated for kernel object.
jmp [DestroyObject]
endp
; This function is called when cursor shape needs to be changed,
; either due to explicit request from application
; or due to moving from one window to another.
; Stdcall with one parameter, return value ignored.
proc select_cursor
virtual at esp
dd ? ; return address
.cursor dd ?
end virtual
mov eax, [.cursor]
mov eax, [eax+CURSOR.dev_obj]
cmp eax, -1
jz .nothing
; Setup base address of cursor, relative to videomemory,
; and enable hardware cursor.
; See PRM for details.
shl eax, HW_CURSOR_WIDTH_SHIFT + HW_CURSOR_HEIGHT_SHIFT + 2
add eax, [cursors_base_offset]
shr eax, 3
mov edx, [mmio]
mov [edx+HWC_MMIO_ADDRESS], eax
mov dword [edx+HWC_MMIO_CTRL], (1 shl 31) + (1 shl 1) + (1 shl 0)
.nothing:
ret 4
endp
; This function is called when cursor is moved to a new place.
; Stdcall with three parameters, return value ignored.
proc move_cursor
virtual at esp
dd ? ; return address
.cursor dd ?
.x dd ?
.y dd ?
.xoffset dd ?
.yoffset dd ?
end virtual
; If cursor x is smaller than hotspot x,
; only part of cursor is shown at position x=0
; with x offset = (hotspot x) - (cursor x).
; Otherwise, the entire cursor is shown (x offset = 0)
; at position x = (cursor x) - (hotspot x).
; Similar for y. Refer to PRM for details.
xor ecx, ecx
mov edx, [.cursor]
mov eax, [.x]
sub eax, [edx+CURSOR.hot_x]
jae @f
sub ecx, eax
xor eax, eax
@@:
mov [.x], eax
mov eax, [.y]
sub eax, [edx+CURSOR.hot_y]
jae @f
shl eax, 8
sub ecx, eax
xor eax, eax
@@:
mov [.y], eax
mov edx, [mmio]
mov eax, [.y]
add eax, HW_CURSOR_HEIGHT - 1 ; no scaling
shl eax, 16
add eax, ecx
mov [edx+HWC_MMIO_OFFSET], eax
mov eax, [.y]
shl eax, 16
add eax, [.x]
mov [edx+HWC_MMIO_POSITION], eax
mov eax, [edx+HWC_MMIO_CTRL]
mov [edx+HWC_MMIO_CTRL], eax
ret 12
endp
; Stdcall with two parameters, return value ignored.
proc restore_cursor
; No-operation for hardware cursors.
ret 8
endp
; No parameters, return value ignored.
proc disable_mouse
; No-operation for hardware cursors.
ret
endp
; === Data ===
rdc_name db 'DISPLAY',0
success_msg db 'RDC: using hardware cursors',13,10,0
align 4
; Look at the comment before definition of NUM_CURSORS.
free_cursors dd 0xFFFFFFFF
data fixups
end data
include '../peimport.inc'
;include_debug_strings
IncludeIGlobals
IncludeUGlobals
align 4
mmio dd ? ; virtual address of MMIO for our device
video_mem_size dd ? ; total size of video memory, in bytes
cursors_base_offset dd ? ; base of cursor data, relative to video memory start
cursors_base_va dd ? ; mapped virtual address of cursor data