kolibrios/programs/fs/unzip60/bzip2/buildbz2.com
siemargl e9b1c1bac6 unzip initial commit
git-svn-id: svn://kolibrios.org@6725 a494cfbc-eb01-0410-851d-a64ba20cac60
2016-11-18 13:40:05 +00:00

278 lines
7.7 KiB
Plaintext

$! BUILDBZ2.COM
$!
$! Build procedure for LIBBZ2_NS support library used with the
$! VMS versions of UnZip/ZipInfo and UnZipSFX
$!
$! Last revised: 2007-12-29 CS.
$!
$! Command args:
$! - select compiler environment: "VAXC", "DECC", "GNUC"
$! - select compiler listings: "LIST" Note that the whole argument
$! is added to the compiler command, so more elaborate options
$! like "LIST/SHOW=ALL" (quoted or space-free) may be specified.
$! - supply additional compiler options: "CCOPTS=xxx" Allows the
$! user to add compiler command options like /ARCHITECTURE or
$! /[NO]OPTIMIZE. For example, CCOPTS=/ARCH=HOST/OPTI=TUNE=HOST
$! or CCOPTS=/DEBUG/NOOPTI. These options must be quoted or
$! space-free.
$!
$! To specify additional options, define the symbol LOCAL_BZIP2
$! as a comma-separated list of the C macros to be defined, and
$! then run BUILDBZ2.COM. For example:
$!
$! $ LOCAL_BZIP2 = "RETURN_CODES"
$! $ @ []BUILDBZ2.COM
$!
$! If you edit this procedure to set LOCAL_BZIP2 here, be sure to
$! use only one "=", to avoid affecting other procedures.
$!
$!
$ on error then goto error
$ on control_y then goto error
$ OLD_VERIFY = f$verify(0)
$!
$ edit := edit ! override customized edit commands
$ say := write sys$output
$!
$!##################### Read settings from environment ########################
$!
$ if (f$type(LOCAL_BZIP2) .eqs. "")
$ then
$ local_bzip2 = ""
$ else ! Trim blanks and append comma if missing
$ local_bzip2 = f$edit(local_bzip2, "TRIM")
$ if (f$extract((f$length(local_bzip2) - 1), 1, local_bzip2) .nes. ",")
$ then
$ local_bzip2 = local_bzip2 + ", "
$ endif
$ endif
$!
$!##################### Customizing section #############################
$!
$ unzx_unx = "UNZIP"
$ unzx_cli = "UNZIP_CLI"
$ unzsfx_unx = "UNZIPSFX"
$ unzsfx_cli = "UNZIPSFX_CLI"
$!
$ CCOPTS = ""
$ LINKOPTS = "/notraceback"
$ LISTING = " /nolist"
$ MAY_USE_DECC = 1
$ MAY_USE_GNUC = 0
$!
$! Process command line parameters requesting optional features.
$!
$ arg_cnt = 1
$ argloop:
$ current_arg_name = "P''arg_cnt'"
$ curr_arg = f$edit( 'current_arg_name', "UPCASE")
$ if (curr_arg .eqs. "") then goto argloop_out
$!
$ if (f$extract( 0, 5, curr_arg) .eqs. "CCOPT")
$ then
$ opts = f$edit( curr_arg, "COLLAPSE")
$ eq = f$locate( "=", opts)
$ CCOPTS = f$extract( (eq+ 1), 1000, opts)
$ goto argloop_end
$ endif
$!
$ if (f$extract( 0, 4, curr_arg) .eqs. "LIST")
$ then
$ LISTING = "/''curr_arg'" ! But see below for mods.
$ goto argloop_end
$ endif
$!
$ if (curr_arg .eqs. "VAXC")
$ then
$ MAY_USE_DECC = 0
$ MAY_USE_GNUC = 0
$ goto argloop_end
$ endif
$!
$ if (curr_arg .eqs. "DECC")
$ then
$ MAY_USE_DECC = 1
$ MAY_USE_GNUC = 0
$ goto argloop_end
$ endif
$!
$ if (curr_arg .eqs. "GNUC")
$ then
$ MAY_USE_DECC = 0
$ MAY_USE_GNUC = 1
$ goto argloop_end
$ endif
$!
$ say "Unrecognized command-line option: ''curr_arg'"
$ goto error
$!
$ argloop_end:
$ arg_cnt = arg_cnt + 1
$ goto argloop
$ argloop_out:
$!
$!#######################################################################
$!
$! Find out current disk, directory, compiler and options
$!
$ workdir = f$environment("default")
$ here = f$parse(workdir, , , "device") + f$parse(workdir, , , "directory")
$!
$! Sense the host architecture (Alpha, Itanium, or VAX).
$!
$ if (f$getsyi("HW_MODEL") .lt. 1024)
$ then
$ arch = "VAX"
$ else
$ if (f$getsyi("ARCH_TYPE") .eq. 2)
$ then
$ arch = "ALPHA"
$ else
$ if (f$getsyi("ARCH_TYPE") .eq. 3)
$ then
$ arch = "IA64"
$ else
$ arch = "unknown_arch"
$ endif
$ endif
$ endif
$!
$ dest = arch
$ cmpl = "DEC/Compaq/HP C"
$ opts = ""
$ if (arch .nes. "VAX")
$ then
$ HAVE_DECC_VAX = 0
$ USE_DECC_VAX = 0
$!
$ if (MAY_USE_GNUC)
$ then
$ say "GNU C is not supported for ''arch'."
$ say "You must use DEC/Compaq/HP C to build UnZip."
$ goto error
$ endif
$!
$ if (.not. MAY_USE_DECC)
$ then
$ say "VAX C is not supported for ''arch'."
$ say "You must use DEC/Compaq/HP C to build UnZip."
$ goto error
$ endif
$!
$ cc = "cc /standard=relax /prefix=all /ansi /names=(as_is)"
$ defs = "''local_bzip2'"
$ else
$ HAVE_DECC_VAX = (f$search("SYS$SYSTEM:DECC$COMPILER.EXE") .nes. "")
$ HAVE_VAXC_VAX = (f$search("SYS$SYSTEM:VAXC.EXE") .nes. "")
$ MAY_HAVE_GNUC = (f$trnlnm("GNU_CC") .nes. "")
$ if (HAVE_DECC_VAX .and. MAY_USE_DECC)
$ then
$ ! We use DECC:
$ USE_DECC_VAX = 1
$ cc = "cc /decc /prefix=all /names=(as_is)"
$ defs = "''local_bzip2'"
$ else
$ ! We use VAXC (or GNU C):
$ USE_DECC_VAX = 0
$ defs = "''local_bzip2'"
$ if ((.not. HAVE_VAXC_VAX .and. MAY_HAVE_GNUC) .or. MAY_USE_GNUC)
$ then
$ cc = "gcc"
$ dest = "''dest'G"
$ cmpl = "GNU C"
$ opts = "GNU_CC:[000000]GCCLIB.OLB /LIBRARY,"
$ else
$ if (HAVE_DECC_VAX)
$ then
$ cc = "cc /vaxc"
$ else
$ cc = "cc"
$ endif
$ dest = "''dest'V"
$ cmpl = "VAX C"
$ endif
$ endif
$ endif
$!
$! Reveal the plan. If compiling, set some compiler options.
$!
$ say "Compiling bzip2 on ''arch' using ''cmpl'."
$!
$ DEF_NS = "/define = (''defs'BZ_NO_STDIO, VMS)"
$!
$! If [.'dest'] does not exist, either complain (link-only) or make it.
$!
$ if (f$search("''dest'.dir;1") .eqs. "")
$ then
$ create /directory [.'dest']
$ endif
$!
$! Arrange to get arch-specific list file placement, if listing, and if
$! the user didn't specify a particular "/LIST =" destination.
$!
$ L = f$edit(LISTING, "COLLAPSE")
$ if ((f$extract(0, 5, L) .eqs. "/LIST") .and. -
(f$extract(4, 1, L) .nes. "="))
$ then
$ LISTING = " /LIST = [.''dest']" + f$extract(5, 1000, LISTING)
$ endif
$!
$! Define compiler command.
$!
$ cc = cc + " /include = ([])" + LISTING + CCOPTS
$!
$! Show interesting facts.
$!
$ say " architecture = ''arch' (destination = [.''dest'])"
$ say " cc = ''cc'"
$ say ""
$!
$ tmp = f$verify( 1) ! Turn echo on to see what's happening.
$!
$!------------------------------- BZip2 section ------------------------------
$!
$! Compile the sources.
$!
$ cc 'DEF_NS' /object = [.'dest']blocksort.OBJ blocksort.c
$ cc 'DEF_NS' /object = [.'dest']huffman.OBJ huffman.c
$ cc 'DEF_NS' /object = [.'dest']crctable.OBJ crctable.c
$ cc 'DEF_NS' /object = [.'dest']randtable.OBJ randtable.c
$ cc 'DEF_NS' /object = [.'dest']compress.OBJ compress.c
$ cc 'DEF_NS' /object = [.'dest']decompress.OBJ decompress.c
$ cc 'DEF_NS' /object = [.'dest']bzlib.OBJ bzlib.c
$!
$! Create the object library.
$!
$ if (f$search( "[.''dest']LIBBZ2_NS.OLB") .eqs. "") then -
libr /object /create [.'dest']LIBBZ2_NS.OLB
$!
$ libr /object /replace [.'dest']LIBBZ2_NS.OLB -
[.'dest']blocksort.OBJ, -
[.'dest']huffman.OBJ, -
[.'dest']crctable.OBJ, -
[.'dest']randtable.OBJ, -
[.'dest']compress.OBJ, -
[.'dest']decompress.OBJ, -
[.'dest']bzlib.OBJ
$!
$! Restore the original default directory, deassign the temporary
$! logical names, and restore the DCL verify status.
$!
$ error:
$!
$ if (f$type(here) .nes. "")
$ then
$ if (here .nes. "")
$ then
$ set default 'here'
$ endif
$ endif
$!
$ if (f$type(OLD_VERIFY) .nes. "")
$ then
$ tmp = f$verify(OLD_VERIFY)
$ endif
$!
$ exit
$!