kolibrios/drivers/unfinished/cardbus.asm
hidnplayr 61d6d826c7 Some small bugfixes in unfinished drivers.
git-svn-id: svn://kolibrios.org@9160 a494cfbc-eb01-0410-851d-a64ba20cac60
2021-08-28 10:40:39 +00:00

321 lines
11 KiB
NASM

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2004-2020. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;; PCMCIA aka cardbus driver for KolibriOS ;;
;; Written by hidnplayr@gmail.com ;;
;; ;;
;; Many credits go to Paolo Franchetti for his HWTEST program ;;
;; (https://sites.google.com/site/pfranz73/) from which large ;;
;; parts of code have been borrowed. ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; This module detects and initialises all Cardbus/pc-card/PCMCIA cards.
; WARNING: Cards must be inserted before the driver starts, and shouldn't be removed.
; This module doesn't handle insertions and removals.
; TODO:
;
; Use GetPCIList instead of reading directly from PCI bus to detect bridge.
; (See #5544 agp.asm for example).
; Export a function in kernel to re-scan PCI device list (fix 'dirty hack').
; Fix bugs (currently not working on all PCMCIA bridges).
format PE DLL native
entry START
CURRENT_API = 0x0200
COMPATIBLE_API = 0x0100
API_VERSION = (COMPATIBLE_API shl 16) + CURRENT_API
CARDBUS_IO_BASE = 0x1400
CARDBUS_IO_SIZE = 0x100
CARDBUS_IRQ = 0x0A
__DEBUG__ = 1
__DEBUG_LEVEL__ = 1
section '.flat' readable writable executable
include '../proc32.inc'
include '../struct.inc'
include '../macros.inc'
include '../pci.inc'
include '../fdo.inc'
;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; proc START ;;
;; ;;
;; (standard driver proc) ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;
proc START c, reason:dword, cmdline:dword
cmp [reason], DRV_ENTRY
jne .fail
DEBUGF 1, "Loading cardbus driver\n"
invoke RegService, my_service, service_proc
call detect
ret
.fail:
xor eax, eax
ret
endp
;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; proc SERVICE_PROC ;;
;; ;;
;; (standard driver proc) ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;
proc service_proc stdcall, ioctl:dword
mov edx, [ioctl]
mov eax, [edx + IOCTL.io_code]
;------------------------------------------------------
cmp eax, 0 ;SRV_GETVERSION
jne .fail
cmp [edx + IOCTL.out_size], 4
jb .fail
mov eax, [edx + IOCTL.output]
mov [eax], dword API_VERSION
xor eax, eax
ret
.fail:
or eax, -1
ret
endp
align 4
proc detect
locals
last_bus dd ?
card_bus dd ?
bus dd ?
devfn dd ?
endl
DEBUGF 1, "Searching for cardbus bridges...\n"
xor eax, eax
mov [bus], eax
inc eax
invoke PciApi
cmp eax, -1
je .err
mov [last_bus], eax
inc eax
mov [card_bus], eax
.next_bus:
and [devfn], 0
.next_dev:
invoke PciRead32, [bus], [devfn], PCI_header.vendor_id
test eax, eax
jz .next
cmp eax, -1
je .next
invoke PciRead16, [bus], [devfn], PCI_header.subclass ; class & subclass
cmp ax, 0x0607
je .found
.next:
test [devfn], 7
jnz .next_fn
invoke PciRead8, [bus], [devfn], PCI_header.header_type
test al, al
js .next_fn
or [devfn], 7
.next_fn:
inc [devfn]
cmp [devfn], 256
jb .next_dev
mov eax, [bus]
inc eax
mov [bus], eax
cmp eax, [last_bus]
jna .next_bus
DEBUGF 1, "Search complete\n"
xor eax, eax
inc eax
ret
.found:
DEBUGF 1, "Found cardbus bridge: bus=0x%x, dev=0x%x\n", [bus], [devfn]
invoke PciRead8, [bus], [devfn], PCI_header.header_type
and al, not 0x80 ; Mask the multifunction device bit
DEBUGF 1, "Header type=0x%x\n", eax:2
cmp al, 2
jne .next
; Write PCI and cardbus numbers
invoke PciRead32, [bus], [devfn], PCI_header02.pci_bus_nr ; PCcard latency settings + Card bus number, PCI bus number
and eax, 0xff000000 ; Keep original latency setting, clear the rest
mov al, byte[bus]
mov ah, byte[card_bus]
mov ebx, [card_bus] ; sub bus nr???
shl ebx, 16
or eax, ebx
DEBUGF 1, "Latency, bus,.. 0x%x\n", eax
invoke PciWrite32, [bus], [devfn], PCI_header02.pci_bus_nr, eax
; set ExCA legacy mode base
invoke PciWrite32, [bus], [devfn], 0x44, 1
; Enable power
invoke PciRead8, [bus], [devfn], PCI_header02.cap_list_offs ; get capabilities offset
movzx eax, al ; (A0 for TI bridges)
DEBUGF 1, "Capabilities offset=0x%x\n", eax:2
add al, 4 ; Power management control/status
invoke PciWrite16, [bus], [devfn], eax, 0x0100 ; Enable PME signaling, power state=D0
; Enable Bus master, io space, memory space
invoke PciWrite16, [bus], [devfn], PCI_header02.command, PCI_CMD_PIO or PCI_CMD_MMIO or PCI_CMD_MASTER
; Write CardBus Socket/ExCA base address
mov eax, 0x7f000000
push eax
invoke PciWrite32, [bus], [devfn], PCI_header02.base_addr, eax ; base is 4 Kbyte aligned
pop ebx
invoke MapIoMem, ebx, 4096, PG_SW+PG_NOCACHE
mov ecx, eax
; Check if a card is present in the socket
mov eax, [ecx + 8] ; Socket present state register
DEBUGF 1, "Socket present state reg: 0x%x\n", eax
and al, 10110110b ; NotACard | CBCard | 16bitCard | CDetect1 | CDetect2
cmp al, 00100000b ; Check for inserted cardbus card
je .CardbusInserted
; No card found... set PCI command back to 0
invoke PciWrite16, [bus], [devfn], PCI_header02.command, 0 ; To avoid conflicts with other sockets
DEBUGF 1, "Cardbus KO\n"
jmp .next
.CardbusInserted:
DEBUGF 1, "Card inserted\n"
;mov word[ecx + 0x802], 0x00F9 ; Assert reset, output enable, vcc=vpp=3.3V
mov dword[ecx + 0x10], 0x33 ; Request 3.3V for Vcc and Vpp (Control register)
;push ecx
;mov esi, 1
;invoke Sleep
;pop ecx
;mov byte[ecx + 0x803], 0x40 ; stop reset
mov dword[ecx + 0xC], 0x4000 ; force Card CV test (Force register) ;;; WHY???
DEBUGF 1, "Resetting card\n"
; Next power up test can be deferred until before writing to Bridge control PCI reg 0x3E
.waitpower: ; For TI, you can check that bits 8-11 in PCI reg 80h are all 0
test dword[ecx + 8], 1 shl 3 ; Test PWRCYCLE bit
jz .waitpower ; Wait for power to go up
DEBUGF 1, "Interface is powered up\n"
; Write MemBase-Limit 0 and 1, then IOBase-Limit 0 and 1
; mem0 space limit = base => size is 4 kilobytes
; set to 0 the second interval (mem1 and IO1)
; IO0: size is 256 bytes
invoke PciWrite32, [bus], [devfn], PCI_header02.mbar_0, 0x7EFFF000
invoke PciWrite32, [bus], [devfn], PCI_header02.mlimit_0, 0x7EFFF000
invoke PciWrite32, [bus], [devfn], PCI_header02.mbar_1, 0
invoke PciWrite32, [bus], [devfn], PCI_header02.mlimit_1, 0
invoke PciWrite32, [bus], [devfn], PCI_header02.iobar_0, CARDBUS_IO
invoke PciWrite32, [bus], [devfn], PCI_header02.iolimit_0, CARDBUS_IO + 0xFC
invoke PciWrite32, [bus], [devfn], PCI_header02.iobar_1, 0
invoke PciWrite32, [bus], [devfn], PCI_header02.iolimit_1, 0
invoke PciWrite8, [bus], [devfn], PCI_header02.interrupt_line, CARDBUS_IRQ ; IRQ line
invoke PciRead16, [bus], [devfn], PCI_header02.bridge_ctrl ; Bridge control
or ax, 0x0700 ; Enable write posting, both memory windows prefetchable
invoke PciWrite16, [bus], [devfn], PCI_header02.bridge_ctrl, eax
DEBUGF 1, "Write posting enabled\n"
DEBUGF 1, "Bridge PCI registers:\n"
rept 17 reg
{
invoke PciRead32, [bus], [devfn], 4*(reg-1)
DEBUGF 1, "0x%x\n", eax
}
inc byte[0x80009021] ; LAST PCI bus count in kernel (dirty HACK!)
mov ecx, 100
.waitactive:
push ecx
invoke PciRead32, [card_bus], 0, PCI_header.vendor_id ; Check if the card is awake yet
inc eax
jnz .got_it
mov esi, 2
invoke Sleep
pop ecx
dec ecx
jnz .waitactive
DEBUGF 1, "Timeout!\n"
; TODO: disable card/bridge again ?
jmp .next
.got_it:
pop eax
DEBUGF 1, "Card is enabled!\n"
invoke PciWrite32, [card_bus], 0, PCI_header02.base_addr, CARDBUS_IO ; Supposing it's IO space that is needed
invoke PciWrite8, [card_bus], 0, PCI_header02.interrupt_line, 0xC ; FIXME
invoke PciWrite16, [card_bus], 0, PCI_header02.command, PCI_CMD_PIO or PCI_CMD_MMIO
DEBUGF 1, "done\n"
jmp .next
.err:
DEBUGF 1, "Error\n"
xor eax, eax
ret
endp
; End of code
data fixups
end data
include '../peimport.inc'
my_service db 'CARDBUS',0 ; max 16 chars include zero
include_debug_strings ; All data wich FDO uses will be included here