300 lines
12 KiB
C
300 lines
12 KiB
C
/* ------------------------------------------------------------------------- */
|
|
/* */
|
|
/* i2c.h - definitions for the i2c-bus interface */
|
|
/* */
|
|
/* ------------------------------------------------------------------------- */
|
|
/* Copyright (C) 1995-2000 Simon G. Vogl
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
|
|
Frodo Looijaard <frodol@dds.nl> */
|
|
|
|
#ifndef _LINUX_I2C_H
|
|
#define _LINUX_I2C_H
|
|
|
|
#include <types.h>
|
|
|
|
|
|
|
|
#define I2C_NAME_SIZE 20
|
|
|
|
struct i2c_msg;
|
|
struct i2c_algorithm;
|
|
struct i2c_adapter;
|
|
struct i2c_client;
|
|
union i2c_smbus_data;
|
|
|
|
|
|
/* Transfer num messages.
|
|
*/
|
|
extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
|
|
int num);
|
|
|
|
/**
|
|
* struct i2c_client - represent an I2C slave device
|
|
* @flags: I2C_CLIENT_TEN indicates the device uses a ten bit chip address;
|
|
* I2C_CLIENT_PEC indicates it uses SMBus Packet Error Checking
|
|
* @addr: Address used on the I2C bus connected to the parent adapter.
|
|
* @name: Indicates the type of the device, usually a chip name that's
|
|
* generic enough to hide second-sourcing and compatible revisions.
|
|
* @adapter: manages the bus segment hosting this I2C device
|
|
* @driver: device's driver, hence pointer to access routines
|
|
* @dev: Driver model device node for the slave.
|
|
* @irq: indicates the IRQ generated by this device (if any)
|
|
* @detected: member of an i2c_driver.clients list or i2c-core's
|
|
* userspace_devices list
|
|
*
|
|
* An i2c_client identifies a single device (i.e. chip) connected to an
|
|
* i2c bus. The behaviour exposed to Linux is defined by the driver
|
|
* managing the device.
|
|
*/
|
|
struct i2c_client {
|
|
unsigned short flags; /* div., see below */
|
|
unsigned short addr; /* chip address - NOTE: 7bit */
|
|
/* addresses are stored in the */
|
|
/* _LOWER_ 7 bits */
|
|
char name[I2C_NAME_SIZE];
|
|
struct i2c_adapter *adapter; /* the adapter we sit on */
|
|
// struct i2c_driver *driver; /* and our access routines */
|
|
// struct device dev; /* the device structure */
|
|
int irq; /* irq issued by device (or -1) */
|
|
struct list_head detected;
|
|
};
|
|
#define to_i2c_client(d) container_of(d, struct i2c_client, dev)
|
|
|
|
|
|
/*
|
|
* The following structs are for those who like to implement new bus drivers:
|
|
* i2c_algorithm is the interface to a class of hardware solutions which can
|
|
* be addressed using the same bus algorithms - i.e. bit-banging or the PCF8584
|
|
* to name two of the most common.
|
|
*/
|
|
struct i2c_algorithm {
|
|
/* If an adapter algorithm can't do I2C-level access, set master_xfer
|
|
to NULL. If an adapter algorithm can do SMBus access, set
|
|
smbus_xfer. If set to NULL, the SMBus protocol is simulated
|
|
using common I2C messages */
|
|
/* master_xfer should return the number of messages successfully
|
|
processed, or a negative value on error */
|
|
int (*master_xfer)(struct i2c_adapter *adap, struct i2c_msg *msgs,
|
|
int num);
|
|
int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr,
|
|
unsigned short flags, char read_write,
|
|
u8 command, int size, union i2c_smbus_data *data);
|
|
|
|
/* To determine what the adapter supports */
|
|
u32 (*functionality) (struct i2c_adapter *);
|
|
};
|
|
|
|
/*
|
|
* i2c_adapter is the structure used to identify a physical i2c bus along
|
|
* with the access algorithms necessary to access it.
|
|
*/
|
|
struct i2c_adapter {
|
|
unsigned int id;
|
|
unsigned int class; /* classes to allow probing for */
|
|
const struct i2c_algorithm *algo; /* the algorithm to access the bus */
|
|
void *algo_data;
|
|
|
|
/* data fields that are valid for all devices */
|
|
u8 level; /* nesting level for lockdep */
|
|
|
|
int timeout; /* in jiffies */
|
|
int retries;
|
|
// struct device dev; /* the adapter device */
|
|
|
|
int nr;
|
|
char name[48];
|
|
};
|
|
#define to_i2c_adapter(d) container_of(d, struct i2c_adapter, dev)
|
|
|
|
|
|
/*flags for the client struct: */
|
|
#define I2C_CLIENT_PEC 0x04 /* Use Packet Error Checking */
|
|
#define I2C_CLIENT_TEN 0x10 /* we have a ten bit chip address */
|
|
/* Must equal I2C_M_TEN below */
|
|
#define I2C_CLIENT_WAKE 0x80 /* for board_info; true iff can wake */
|
|
|
|
/* i2c adapter classes (bitmask) */
|
|
#define I2C_CLASS_HWMON (1<<0) /* lm_sensors, ... */
|
|
#define I2C_CLASS_TV_ANALOG (1<<1) /* bttv + friends */
|
|
#define I2C_CLASS_TV_DIGITAL (1<<2) /* dvb cards */
|
|
#define I2C_CLASS_DDC (1<<3) /* DDC bus on graphics adapters */
|
|
#define I2C_CLASS_SPD (1<<7) /* SPD EEPROMs and similar */
|
|
|
|
/* i2c_client_address_data is the struct for holding default client
|
|
* addresses for a driver and for the parameters supplied on the
|
|
* command line
|
|
*/
|
|
struct i2c_client_address_data {
|
|
const unsigned short *normal_i2c;
|
|
const unsigned short *probe;
|
|
const unsigned short *ignore;
|
|
const unsigned short * const *forces;
|
|
};
|
|
|
|
/* Internal numbers to terminate lists */
|
|
#define I2C_CLIENT_END 0xfffeU
|
|
|
|
/* The numbers to use to set I2C bus address */
|
|
#define ANY_I2C_BUS 0xffff
|
|
|
|
/* Construct an I2C_CLIENT_END-terminated array of i2c addresses */
|
|
#define I2C_ADDRS(addr, addrs...) \
|
|
((const unsigned short []){ addr, ## addrs, I2C_CLIENT_END })
|
|
|
|
|
|
/**
|
|
* struct i2c_msg - an I2C transaction segment beginning with START
|
|
* @addr: Slave address, either seven or ten bits. When this is a ten
|
|
* bit address, I2C_M_TEN must be set in @flags and the adapter
|
|
* must support I2C_FUNC_10BIT_ADDR.
|
|
* @flags: I2C_M_RD is handled by all adapters. No other flags may be
|
|
* provided unless the adapter exported the relevant I2C_FUNC_*
|
|
* flags through i2c_check_functionality().
|
|
* @len: Number of data bytes in @buf being read from or written to the
|
|
* I2C slave address. For read transactions where I2C_M_RECV_LEN
|
|
* is set, the caller guarantees that this buffer can hold up to
|
|
* 32 bytes in addition to the initial length byte sent by the
|
|
* slave (plus, if used, the SMBus PEC); and this value will be
|
|
* incremented by the number of block data bytes received.
|
|
* @buf: The buffer into which data is read, or from which it's written.
|
|
*
|
|
* An i2c_msg is the low level representation of one segment of an I2C
|
|
* transaction. It is visible to drivers in the @i2c_transfer() procedure,
|
|
* to userspace from i2c-dev, and to I2C adapter drivers through the
|
|
* @i2c_adapter.@master_xfer() method.
|
|
*
|
|
* Except when I2C "protocol mangling" is used, all I2C adapters implement
|
|
* the standard rules for I2C transactions. Each transaction begins with a
|
|
* START. That is followed by the slave address, and a bit encoding read
|
|
* versus write. Then follow all the data bytes, possibly including a byte
|
|
* with SMBus PEC. The transfer terminates with a NAK, or when all those
|
|
* bytes have been transferred and ACKed. If this is the last message in a
|
|
* group, it is followed by a STOP. Otherwise it is followed by the next
|
|
* @i2c_msg transaction segment, beginning with a (repeated) START.
|
|
*
|
|
* Alternatively, when the adapter supports I2C_FUNC_PROTOCOL_MANGLING then
|
|
* passing certain @flags may have changed those standard protocol behaviors.
|
|
* Those flags are only for use with broken/nonconforming slaves, and with
|
|
* adapters which are known to support the specific mangling options they
|
|
* need (one or more of IGNORE_NAK, NO_RD_ACK, NOSTART, and REV_DIR_ADDR).
|
|
*/
|
|
struct i2c_msg {
|
|
u16 addr; /* slave address */
|
|
u16 flags;
|
|
#define I2C_M_TEN 0x0010 /* this is a ten bit chip address */
|
|
#define I2C_M_RD 0x0001 /* read data, from slave to master */
|
|
#define I2C_M_NOSTART 0x4000 /* if I2C_FUNC_PROTOCOL_MANGLING */
|
|
#define I2C_M_REV_DIR_ADDR 0x2000 /* if I2C_FUNC_PROTOCOL_MANGLING */
|
|
#define I2C_M_IGNORE_NAK 0x1000 /* if I2C_FUNC_PROTOCOL_MANGLING */
|
|
#define I2C_M_NO_RD_ACK 0x0800 /* if I2C_FUNC_PROTOCOL_MANGLING */
|
|
#define I2C_M_RECV_LEN 0x0400 /* length will be first received byte */
|
|
u16 len; /* msg length */
|
|
u8 *buf; /* pointer to msg data */
|
|
};
|
|
|
|
/* To determine what functionality is present */
|
|
|
|
#define I2C_FUNC_I2C 0x00000001
|
|
#define I2C_FUNC_10BIT_ADDR 0x00000002
|
|
#define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_NOSTART etc. */
|
|
#define I2C_FUNC_SMBUS_PEC 0x00000008
|
|
#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */
|
|
#define I2C_FUNC_SMBUS_QUICK 0x00010000
|
|
#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000
|
|
#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000
|
|
#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000
|
|
#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000
|
|
#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000
|
|
#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000
|
|
#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000
|
|
#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000
|
|
#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
|
|
#define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000 /* I2C-like block xfer */
|
|
#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */
|
|
|
|
#define I2C_FUNC_SMBUS_BYTE (I2C_FUNC_SMBUS_READ_BYTE | \
|
|
I2C_FUNC_SMBUS_WRITE_BYTE)
|
|
#define I2C_FUNC_SMBUS_BYTE_DATA (I2C_FUNC_SMBUS_READ_BYTE_DATA | \
|
|
I2C_FUNC_SMBUS_WRITE_BYTE_DATA)
|
|
#define I2C_FUNC_SMBUS_WORD_DATA (I2C_FUNC_SMBUS_READ_WORD_DATA | \
|
|
I2C_FUNC_SMBUS_WRITE_WORD_DATA)
|
|
#define I2C_FUNC_SMBUS_BLOCK_DATA (I2C_FUNC_SMBUS_READ_BLOCK_DATA | \
|
|
I2C_FUNC_SMBUS_WRITE_BLOCK_DATA)
|
|
#define I2C_FUNC_SMBUS_I2C_BLOCK (I2C_FUNC_SMBUS_READ_I2C_BLOCK | \
|
|
I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)
|
|
|
|
#define I2C_FUNC_SMBUS_EMUL (I2C_FUNC_SMBUS_QUICK | \
|
|
I2C_FUNC_SMBUS_BYTE | \
|
|
I2C_FUNC_SMBUS_BYTE_DATA | \
|
|
I2C_FUNC_SMBUS_WORD_DATA | \
|
|
I2C_FUNC_SMBUS_PROC_CALL | \
|
|
I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \
|
|
I2C_FUNC_SMBUS_I2C_BLOCK | \
|
|
I2C_FUNC_SMBUS_PEC)
|
|
|
|
/*
|
|
* Data for SMBus Messages
|
|
*/
|
|
#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */
|
|
union i2c_smbus_data {
|
|
__u8 byte;
|
|
__u16 word;
|
|
__u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */
|
|
/* and one more for user-space compatibility */
|
|
};
|
|
|
|
/* i2c_smbus_xfer read or write markers */
|
|
#define I2C_SMBUS_READ 1
|
|
#define I2C_SMBUS_WRITE 0
|
|
|
|
/* SMBus transaction types (size parameter in the above functions)
|
|
Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */
|
|
#define I2C_SMBUS_QUICK 0
|
|
#define I2C_SMBUS_BYTE 1
|
|
#define I2C_SMBUS_BYTE_DATA 2
|
|
#define I2C_SMBUS_WORD_DATA 3
|
|
#define I2C_SMBUS_PROC_CALL 4
|
|
#define I2C_SMBUS_BLOCK_DATA 5
|
|
#define I2C_SMBUS_I2C_BLOCK_BROKEN 6
|
|
#define I2C_SMBUS_BLOCK_PROC_CALL 7 /* SMBus 2.0 */
|
|
#define I2C_SMBUS_I2C_BLOCK_DATA 8
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#endif /* _LINUX_I2C_H */
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|