diff --git a/data/common/emul/DosBox/dosbox.conf b/data/common/emul/DosBox/dosbox.conf deleted file mode 100644 index c2abecb38a..0000000000 --- a/data/common/emul/DosBox/dosbox.conf +++ /dev/null @@ -1,233 +0,0 @@ -# This is the configurationfile for DOSBox 0.73. -# Lines starting with a # are commentlines. -# They are used to (briefly) document the effect of each option. - -[sdl] -# fullscreen: Start dosbox directly in fullscreen. -# fulldouble: Use double buffering in fullscreen. -# fullresolution: What resolution to use for fullscreen: original or fixed size (e.g. 1024x768). -# windowresolution: Scale the window to this size IF the output device supports hardware scaling. -# output: What video system to use for output. -# Possible values: surface, overlay, opengl, openglnb, ddraw. -# autolock: Mouse will automatically lock, if you click on the screen. -# sensitivity: Mouse sensitivity. -# waitonerror: Wait before closing the console if dosbox has an error. -# priority: Priority levels for dosbox. Second entry behind the comma is for when dosbox is not focused/minimized. (pause is only valid for the second entry) -# Possible values: lowest, lower, normal, higher, highest, pause. -# mapperfile: File used to load/save the key/event mappings from. -# usescancodes: Avoid usage of symkeys, might not work on all operating systems. - -fullscreen=false -fulldouble=false -fullresolution=original -windowresolution=original -output=surface -autolock=true -sensitivity=100 -waitonerror=true -priority=higher,normal -mapperfile=mapper.txt -usescancodes=true - -[dosbox] -# language: Select another language file. -# machine: The type of machine tries to emulate. -# Possible values: hercules, cga, tandy, pcjr, ega, vgaonly, svga_s3, svga_et3000, svga_et4000, svga_paradise, vesa_nolfb, vesa_oldvbe. -# captures: Directory where things like wave, midi, screenshot get captured. -# memsize: Amount of memory DOSBox has in megabytes. -# This value is best left at its default to avoid problems with some games, -# though few games might require a higher value. -# There is generally no speed advantage when raising this value. - -language= -machine=svga_s3 -captures=capture -memsize=16 - -[render] -# frameskip: How many frames DOSBox skips before drawing one. -# aspect: Do aspect correction, if your output method doesn't support scaling this can slow things down!. -# scaler: Scaler used to enlarge/enhance low resolution modes. If 'forced' is appended,the scaler will be used even if the result might not be desired. -# Possible values: none, normal2x, normal3x, advmame2x, advmame3x, advinterp2x, advinterp3x, hq2x, hq3x, 2xsai, super2xsai, supereagle, tv2x, tv3x, rgb2x, rgb3x, scan2x, scan3x. - -frameskip=0 -aspect=false -scaler=normal2x - -[cpu] -# core: CPU Core used in emulation. auto will switch to dynamic if available and appropriate. -# Possible values: auto, dynamic, normal, simple. -# cputype: CPU Type used in emulation. auto is the fastest choice. -# Possible values: auto, 386, 386_slow, 486_slow, pentium_slow, 386_prefetch. -# cycles: Amount of instructions DOSBox tries to emulate each millisecond. Setting this value too high results in sound dropouts and lags. Cycles can be set in 3 ways: -# 'auto' tries to guess what a game needs. -# It usually works, but can fail for certain games. -# 'fixed #number' will set a fixed amount of cycles. This is what you usually need if 'auto' fails. -# (Example: fixed 4000) -# 'max' will allocate as much cycles as your computer is able to handle -# -# Possible values: auto, fixed, max. -# cycleup: Amount of cycles to increase/decrease with keycombo. -# cycledown: Setting it lower than 100 will be a percentage. - -core=auto -cputype=auto -cycles=auto -cycleup=500 -cycledown=20 - -[mixer] -# nosound: Enable silent mode, sound is still emulated though. -# rate: Mixer sample rate, setting any device's rate higher than this will probably lower their sound quality. -# Possible values: 22050, 44100, 48000, 32000, 16000, 11025, 8000, 49716. -# blocksize: Mixer block size, larger blocks might help sound stuttering but sound will also be more lagged. -# Possible values: 2048, 4096, 8192, 1024, 512, 256. -# prebuffer: How many milliseconds of data to keep on top of the blocksize. - -nosound=false -rate=22050 -blocksize=2048 -prebuffer=10 - -[midi] -# mpu401: Type of MPU-401 to emulate. -# Possible values: intelligent, uart, none. -# mididevice: Device that will receive the MIDI data from MPU-401. -# Possible values: default, win32, alsa, oss, coreaudio, coremidi, none. -# midiconfig: Special configuration options for the device driver. This is usually the id of the device you want to use. See README for details. - -mpu401=intelligent -mididevice=default -midiconfig= - -[sblaster] -# sbtype: Type of sblaster to emulate. -# Possible values: sb1, sb2, sbpro1, sbpro2, sb16, none. -# sbbase: The IO address of the soundblaster. -# Possible values: 220, 240, 260, 280, 2a0, 2c0, 2e0, 300. -# irq: The IRQ number of the soundblaster. -# Possible values: 7, 5, 3, 9, 10, 11, 12. -# dma: The DMA number of the soundblaster. -# Possible values: 1, 5, 0, 3, 6, 7. -# hdma: The High DMA number of the soundblaster. -# Possible values: 1, 5, 0, 3, 6, 7. -# sbmixer: Allow the soundblaster mixer to modify the DOSBox mixer. -# oplmode: Type of OPL emulation. On 'auto' the mode is determined by sblaster type. All OPL modes are Adlib-compatible, except for 'cms'. -# Possible values: auto, cms, opl2, dualopl2, opl3, none. -# oplemu: Provider for the OPL emulation. compat or old might provide better quality (see oplrate as well). -# Possible values: default, compat, fast, old. -# oplrate: Sample rate of OPL music emulation. Use 49716 for highest quality (set the mixer rate accordingly). -# Possible values: 22050, 49716, 44100, 48000, 32000, 16000, 11025, 8000. - -sbtype=sb16 -sbbase=220 -irq=7 -dma=1 -hdma=5 -sbmixer=true -oplmode=auto -oplemu=default -oplrate=22050 - -[gus] -# gus: Enable the Gravis Ultrasound emulation. -# gusrate: Sample rate of Ultrasound emulation. -# Possible values: 22050, 44100, 48000, 32000, 16000, 11025, 8000, 49716. -# gusbase: The IO base address of the Gravis Ultrasound. -# Possible values: 240, 220, 260, 280, 2a0, 2c0, 2e0, 300. -# gusirq: The IRQ number of the Gravis Ultrasound. -# Possible values: 5, 3, 7, 9, 10, 11, 12. -# gusdma: The DMA channel of the Gravis Ultrasound. -# Possible values: 3, 0, 1, 5, 6, 7. -# ultradir: Path to Ultrasound directory. In this directory -# there should be a MIDI directory that contains -# the patch files for GUS playback. Patch sets used -# with Timidity should work fine. - -gus=false -gusrate=22050 -gusbase=240 -gusirq=5 -gusdma=3 -ultradir=C:\ULTRASND - -[speaker] -# pcspeaker: Enable PC-Speaker emulation. -# pcrate: Sample rate of the PC-Speaker sound generation. -# Possible values: 22050, 44100, 48000, 32000, 16000, 11025, 8000, 49716. -# tandy: Enable Tandy Sound System emulation. For 'auto', emulation is present only if machine is set to 'tandy'. -# Possible values: auto, on, off. -# tandyrate: Sample rate of the Tandy 3-Voice generation. -# Possible values: 22050, 44100, 48000, 32000, 16000, 11025, 8000, 49716. -# disney: Enable Disney Sound Source emulation. (Covox Voice Master and Speech Thing compatible). - -pcspeaker=true -pcrate=22050 -tandy=auto -tandyrate=22050 -disney=true - -[joystick] -# joysticktype: Type of joystick to emulate: auto (default), none, -# 2axis (supports two joysticks), -# 4axis (supports one joystick, first joystick used), -# 4axis_2 (supports one joystick, second joystick used), -# fcs (Thrustmaster), ch (CH Flightstick). -# none disables joystick emulation. -# auto chooses emulation depending on real joystick(s). -# Possible values: auto, 2axis, 4axis, 4axis_2, fcs, ch, none. -# timed: enable timed intervals for axis. (false is old style behaviour). -# autofire: continuously fires as long as you keep the button pressed. -# swap34: swap the 3rd and the 4th axis. can be useful for certain joysticks. -# buttonwrap: enable button wrapping at the number of emulated buttons. - -joysticktype=auto -timed=true -autofire=false -swap34=false -buttonwrap=true - -[serial] -# serial1: set type of device connected to com port. -# Can be disabled, dummy, modem, nullmodem, directserial. -# Additional parameters must be in the same line in the form of -# parameter:value. Parameter for all types is irq. -# for directserial: realport (required), rxdelay (optional). -# (realport:COM1 realport:ttyS0). -# for modem: listenport (optional). -# for nullmodem: server, rxdelay, txdelay, telnet, usedtr, -# transparent, port, inhsocket (all optional). -# Example: serial1=modem listenport:5000 -# Possible values: dummy, disabled, modem, nullmodem, directserial. -# serial2: see serial1 -# Possible values: dummy, disabled, modem, nullmodem, directserial. -# serial3: see serial1 -# Possible values: dummy, disabled, modem, nullmodem, directserial. -# serial4: see serial1 -# Possible values: dummy, disabled, modem, nullmodem, directserial. - -serial1=dummy -serial2=dummy -serial3=disabled -serial4=disabled - -[dos] -# xms: Enable XMS support. -# ems: Enable EMS support. -# umb: Enable UMB support. -# keyboardlayout: Language code of the keyboard layout (or none). - -xms=true -ems=true -umb=true -keyboardlayout=auto - -[ipx] -# ipx: Enable ipx over UDP/IP emulation. - -ipx=false - -[autoexec] -# Lines in this section will be run at startup. -keyb ru 866 - diff --git a/data/common/emul/DosBox/dosbox_new b/data/common/emul/DosBox/dosbox_new deleted file mode 100755 index b3896a8b8e..0000000000 Binary files a/data/common/emul/DosBox/dosbox_new and /dev/null differ