kolibrios/programs/network/autodhcp/trunk/autodhcp.asm

467 lines
13 KiB
NASM
Raw Normal View History

; Automated dhcp client
; v 1.3
;
; with thanks to authors of DHCP client for menuetos: Mike Hibbet
;
; by HidnPlayr & Derpenguin
TIMEOUT equ 60 ; in seconds
BUFFER equ 1024
__DEBUG__ equ 1
__DEBUG_LEVEL__ equ 1; 1 = all, 2 = errors
use32
org 0x0
db 'MENUET01' ; 8 byte id
dd 0x01 ; header version
dd START ; start of code
dd IM_END ; size of image
dd I_END ; memory for app
dd I_END ; esp
dd 0x0 , 0x0 ; I_Param , I_Icon
;include 'macros.inc'
include 'eth.inc'
include 'debug-fdo.inc'
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; CONFIGURATION FOR LINK-LOCAL ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; ;
PROBE_WAIT equ 1 ; second (initial random delay) ;
PROBE_MIN equ 1 ; second (minimum delay till repeated probe) ;
PROBE_MAX equ 2 ; seconds (maximum delay till repeated probe) ;
PROBE_NUM equ 3 ; (number of probe packets) ;
; ;
ANNOUNCE_NUM equ 2 ; (number of announcement packets) ;
ANNOUNCE_INTERVAL equ 2 ; seconds (time between announcement packets) ;
ANNOUNCE_WAIT equ 2 ; seconds (delay before announcing) ;
; ;
MAX_CONFLICTS equ 10 ; (max conflicts before rate limiting) ;
; ;
RATE_LIMIT_INTERVAL equ 60 ; seconds (delay between successive attempts) ;
; ;
DEFEND_INTERVAL equ 10 ; seconds (min. wait between defensive ARPs) ;
; ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
START: ; start of execution
mov eax,40 ; Report events
mov ebx,10000000b ; Only Stack
int 0x40
mov eax,52 ; first, enable the stack (packet driver)
mov ebx,2
mov ecx,0x00000383
int 0x40
DEBUGF 1,"DHCP: Stack Initialized.\n"
eth.status eax ; Read the Stack status
test eax,eax ; if eax is zero, no driver was found
jnz @f
DEBUGF 1,"DHCP: No Card detected\n"
jmp close
@@:
DEBUGF 1,"DHCP: Detected card: %x\n",eax
@@:
eth.check_cable eax
test al,al
jnz @f
DEBUGF 1,"DHCP: Ethernet Cable not connected\n"
mov eax,5
mov ebx,500 ; loop until cable is connected (check every 5 sec)
int 0x40
jmp @r
@@:
DEBUGF 1,"DHCP: Ethernet Cable status: %d\n",al
eth.read_mac MAC
DEBUGF 1,"DHCP: MAC address: %x-%x-%x-%x-%x-%x\n",[MAC]:2,[MAC+1]:2,[MAC+2]:2,[MAC+3]:2,[MAC+4]:2,[MAC+5]:2
; jmp apipa ; comment this out if you want to skip DHCP and continue with link-local
;***************************************************************************
;
; DHCP rubish starts here
;
;***************************************************************************
eth.check_port 68,eax ; Check if port 68 is available
cmp eax,1
je @f
DEBUGF 1,"DHCP: Port 68 is already in use.\n"
jmp close
@@:
eth.open_udp 68,67,-1,[socketNum] ; open socket (local,remote,ip,socket)
DEBUGF 1,"DHCP: Socket opened: %d\n",eax
; Setup the first msg we will send
mov byte [dhcpMsgType], 0x01 ; DHCP discover
mov dword [dhcpLease], esi ; esi is still -1 (-1 = forever)
mov eax,26
mov ebx,9
int 0x40
imul eax,100
mov [currTime],eax
;***************************************************************************
; Function
; buildRequest
;
; Description
; Creates a DHCP request packet.
;
;***************************************************************************
buildRequest:
xor eax,eax ; Clear dhcpMsg to all zeros
mov edi,dhcpMsg
mov ecx,BUFFER
cld
rep stosb
mov edx, dhcpMsg
mov [edx], byte 0x01 ; Boot request
mov [edx+1], byte 0x01 ; Ethernet
mov [edx+2], byte 0x06 ; Ethernet h/w len
mov [edx+4], dword 0x11223344 ; xid
mov eax,[currTime]
mov [edx+8], eax ; secs, our uptime
mov [edx+10], byte 0x80 ; broadcast flag set
mov eax, dword [MAC] ; first 4 bytes of MAC
mov [edx+28],dword eax
mov ax, word [MAC+4] ; last 2 bytes of MAC
mov [edx+32],word ax
mov [edx+236], dword 0x63538263 ; magic number
mov [edx+240], word 0x0135 ; option DHCP msg type
mov al, [dhcpMsgType]
mov [edx+240+2], al
mov [edx+240+3], word 0x0433 ; option Lease time = infinity
mov eax, [dhcpLease]
mov [edx+240+5], eax
mov [edx+240+9], word 0x0432 ; option requested IP address
mov eax, [dhcpClientIP]
mov [edx+240+11], eax
mov [edx+240+15], word 0x0437 ; option request list
mov [edx+240+17], dword 0x0f060301
cmp [dhcpMsgType], byte 0x01 ; Check which msg we are sending
jne br001
mov [edx+240+21], byte 0xff ; "Discover" options
mov [dhcpMsgLen], dword 262 ; end of options marker
jmp ctr000
br001: ; "Request" options
mov [edx+240+21], word 0x0436 ; server IP
mov eax, [dhcpServerIP]
mov [edx+240+23], eax
mov [edx+240+27], byte 0xff ; end of options marker
mov [dhcpMsgLen], dword 268
ctr000:
eth.write_udp [socketNum],[dhcpMsgLen],dhcpMsg ; write to socket ( send broadcast request )
mov eax, dhcpMsg ; Setup the DHCP buffer to receive response
mov [dhcpMsgLen], eax ; Used as a pointer to the data
mov eax,23 ; wait here for event (data from remote)
mov ebx,TIMEOUT*10
int 0x40
eth.poll [socketNum]
test eax,eax
jnz ctr002
DEBUGF 2,"DHCP: Timeout!\n"
eth.close_udp [socketNum]
jmp apipa ; no server found, lets try zeroconf
ctr002: ; we have data - this will be the response
eth.read_packet [socketNum], dhcpMsg, BUFFER
mov [dhcpMsgLen], eax
eth.close_udp [socketNum]
; depending on which msg we sent, handle the response
; accordingly.
; If the response is to a dhcp discover, then:
; 1) If response is DHCP OFFER then
; 1.1) record server IP, lease time & IP address.
; 1.2) send a request packet
; If the response is to a dhcp request, then:
; 1) If the response is DHCP ACK then
; 1.1) extract the DNS & subnet fields. Set them in the stack
cmp [dhcpMsgType], byte 0x01 ; did we send a discover?
je discover
cmp [dhcpMsgType], byte 0x03 ; did we send a request?
je request
jmp close ; really unknown, what we did
discover:
call parseResponse
cmp [dhcpMsgType], byte 0x02 ; Was the response an offer?
jne apipa ; NO - so we do zeroconf
mov [dhcpMsgType], byte 0x03 ; DHCP request
jmp buildRequest
request:
call parseResponse
cmp [dhcpMsgType], byte 0x05 ; Was the response an ACK? It should be
jne apipa ; NO - so we do zeroconf
close:
DEBUGF 1,"DHCP: Exiting\n"
mov eax,-1 ; at last, exit
int 0x40
;***************************************************************************
; Function
; parseResponse
;
; Description
; extracts the fields ( client IP address and options ) from
; a DHCP response
; The values go into
; dhcpMsgType,dhcpLease,dhcpClientIP,dhcpServerIP,
; dhcpDNSIP, dhcpSubnet
; The message is stored in dhcpMsg
;
;***************************************************************************
parseResponse:
DEBUGF 1,"DHCP: Data received, parsing response\n"
mov edx, dhcpMsg
pusha
eth.set_IP [edx+16]
mov eax,[edx]
mov [dhcpClientIP],eax
DEBUGF 1,"DHCP: Client: %u.%u.%u.%u\n",[edx+16]:1,[edx+17]:1,[edx+18]:1,[edx+19]:1
popa
add edx, 240 ; Point to first option
pr001:
mov al, [edx]
cmp al, 0xff ; End of options?
je pr_exit
cmp al, 53 ; Msg type is a single byte option
jne pr002
mov al, [edx+2]
mov [dhcpMsgType], al
add edx, 3
jmp pr001 ; Get next option
pr002:
inc edx
movzx ecx, byte [edx]
inc edx ; point to data
cmp al, 54 ; server id
jne pr0021
mov eax, [edx] ; All options are 4 bytes, so get it
mov [dhcpServerIP], eax
DEBUGF 1,"DHCP: Server: %u.%u.%u.%u\n",[edx]:1,[edx+1]:1,[edx+2]:1,[edx+3]:1
jmp pr003
pr0021:
cmp al, 51 ; lease
jne pr0022
pusha
DEBUGF 1,"DHCP: lease: "
mov eax,[edx]
bswap eax
mov [dhcpLease],eax
cmp dword[edx],-1 ; i really don't know, how to test it
jne no_lease_forever
DEBUGF 1,"forever\n"
jmp @f
no_lease_forever:
DEBUGF 1,"%d\n",eax
@@:
popa
jmp pr003
pr0022:
cmp al, 1 ; subnet mask
jne pr0023
pusha
eth.set_SUBNET [edx]
DEBUGF 1,"DHCP: Subnet: %u.%u.%u.%u\n",[edx]:1,[edx+1]:1,[edx+2]:1,[edx+3]:1
popa
jmp pr003
pr0023:
cmp al, 3 ; gateway ip
jne pr0024
pusha
eth.set_GATEWAY [edx]
DEBUGF 1,"DHCP: Gateway: %u.%u.%u.%u\n",[edx]:1,[edx+1]:1,[edx+2]:1,[edx+3]:1
popa
pr0024:
cmp al, 6 ; dns ip
jne pr003
pusha
eth.set_DNS [edx]
DEBUGF 1,"DHCP: DNS: %u.%u.%u.%u\n",[edx]:1,[edx+1]:1,[edx+2]:1,[edx+3]:1
popa
pr003:
add edx, ecx
jmp pr001
pr_exit:
; DEBUGF 1,"DHCP: Sending ARP probe\n"
; eth.ARP_ANNOUNCE [dhcpClientIP] ; send an ARP announc packet
eth.get_GATEWAY eax ; if gateway was not set, set it to the DHCP SERVER IP
test eax,eax
jnz close
eth.set_GATEWAY [dhcpServerIP]
jmp close
apipa:
call random
mov ecx,0xfea9 ; IP 169.254.0.0 link local net, see RFC3927
mov cx,ax
eth.set_IP ecx ; mask is 255.255.0.0
DEBUGF 1,"ZeroConf: Link Local IP assinged: 169.254.%u.%u\n",[generator+2]:1,[generator+3]:1
eth.set_SUBNET 0xffff
eth.set_GATEWAY 0x0
eth.set_DNS 0x0
mov eax,5
mov ebx,PROBE_WAIT*100
int 0x40
xor esi,esi
probe_loop:
call random ; create a pseudo random number in eax (seeded by MAC)
cmp al,PROBE_MIN*100 ; check if al is bigger then PROBE_MIN
jge @f ; all ok
add al,(PROBE_MAX-PROBE_MIN)*100 ; al is too small
@@:
cmp al,PROBE_MAX*100
jle @f
sub al,(PROBE_MAX-PROBE_MIN)*100
@@:
movzx ebx,al
DEBUGF 1,"ZeroConf: Waiting %u0ms\n",ebx
mov eax,5
int 0x40
DEBUGF 1,"ZeroConf: Sending Probe\n"
; eth.ARP_PROBE MAC2
inc esi
cmp esi,PROBE_NUM
jl probe_loop
; now we wait further ANNOUNCE_WAIT seconds and send ANNOUNCE_NUM ARP announces. If any other host has assingnd
; IP within this time, we should create another adress, that have to be done later
DEBUGF 1,"ZeroConf: Waiting %us\n",ANNOUNCE_WAIT
mov eax,5
mov ebx,ANNOUNCE_WAIT*100
int 0x40
xor esi,esi
announce_loop:
DEBUGF 1,"ZeroConf: Sending Announce\n"
; eth.ARP_ANNOUNCE MAC2
inc esi
cmp esi,ANNOUNCE_NUM
je @f
DEBUGF 1,"ZeroConf: Waiting %us\n",ANNOUNCE_INTERVAL
mov eax,5
mov ebx,ANNOUNCE_INTERVAL*100
int 0x40
jmp announce_loop
@@:
jmp close ; we should, instead of closing, detect ARP conflicts and detect if cable keeps connected ;)
random:
mov eax,[generator]
add eax,-43ab45b5h
ror eax,1
bswap eax
xor eax,dword[MAC]
ror eax,1
xor eax,dword[MAC+2]
mov [generator],eax
ret
; DATA AREA
include_debug_strings ; ALWAYS present in data section
IM_END:
dhcpClientIP dd 0
dhcpMsgType db 0
dhcpLease dd 0
dhcpServerIP dd 0
dhcpMsgLen dd 0
socketNum dd 0
MAC rb 6
currTime dd 0
renewTime dd 0
generator dd 0
dhcpMsg rb BUFFER
I_END: