From 05210d030e530fa551f35c18f7a9b0c6553bb756 Mon Sep 17 00:00:00 2001 From: CleverMouse Date: Thu, 30 Dec 2010 12:40:30 +0000 Subject: [PATCH] LVDS non-VGA modesetter for Intel videocards git-svn-id: svn://kolibrios.org@1731 a494cfbc-eb01-0410-851d-a64ba20cac60 --- kernel/trunk/drivers/vidintel.asm | 391 ++++++++++++++++++++++++++++++ 1 file changed, 391 insertions(+) create mode 100644 kernel/trunk/drivers/vidintel.asm diff --git a/kernel/trunk/drivers/vidintel.asm b/kernel/trunk/drivers/vidintel.asm new file mode 100644 index 0000000000..107d248b34 --- /dev/null +++ b/kernel/trunk/drivers/vidintel.asm @@ -0,0 +1,391 @@ +; Stub of videodriver for Intel videocards. +; (c) CleverMouse + +; When the start procedure gots control, +; it tries to detect preferred resolution, +; sets the detected resolution assuming 32-bpp VESA mode and exits +; (without registering a service). +; Detection can be overloaded with compile-time settings +; use_predefined_mode/predefined_width/predefined_height. + +; set predefined resolution here +use_predefined_mode = 0;1 +predefined_width = 0;1366 +predefined_height = 0;768 + +; standard driver stuff +format MS COFF + +DEBUG = 1 + +include 'proc32.inc' +include 'imports.inc' + +public START +public version + +section '.flat' code readable align 16 +; the start procedure (see the description above) +START: +; 1. Detect device. Abort if not found. + push esi + call DetectDevice + test esi, esi + jz .return0 +; 2. Detect optimal mode unless the mode is given explicitly. Abort if failed. +if use_predefined_mode = 0 + call DetectMode +end if + cmp [width], 0 + jz .return0_cleanup +; 3. Set the detected mode. + call SetMode +; 4. Cleanup and return. +.return0_cleanup: + stdcall FreeKernelSpace, esi +.return0: + pop esi + xor eax, eax + ret 4 + +; check that there is Intel videocard +; if so, map MMIO registers and set internal variables +; esi points to MMIO block; NULL means no device +DetectDevice: +; 1. Sanity check: check that we are dealing with Intel videocard. +; Integrated video device for Intel is always at PCI:0:2:0. + xor esi, esi ; initialize return value to NULL +; 1a. Get PCI VendorID and DeviceID. + push esi + push 10h + push esi + call PciRead32 +; 1b. loword(eax) = ax = VendorID, hiword(eax) = DeviceID. +; Test whether we have Intel chipset. + cmp ax, 8086h + jnz .return +; 1c. Say hi including DeviceID. + shr eax, 10h + push edi + pusha + mov edi, pciid_text + call WriteWord + mov esi, hellomsg + call SysMsgBoardStr + popa +; 1d. Test whether we know this DeviceID. +; If this is the case, remember the position of the device in line of Intel cards; +; this knowledge will be useful later. +; Tested on devices with id: 8086:0046, partially 8086:2A02. + mov ecx, pciids_num + mov edi, pciids + repnz scasw + pop edi + jnz .return_unknown_pciid + sub ecx, pciids_num - 1 + neg ecx + mov [deviceType], ecx +; 1e. Continue saying hi with positive intonation. + pusha + mov esi, knownmsg + call SysMsgBoardStr + popa +; 2. Prepare MMIO region to control the card. +; 2a. Read MMIO physical address from PCI config space. + push 10h + push 10h + push esi + call PciRead32 +; 2b. Mask out PCI region type, lower 4 bits. + and al, not 0xF +; 2c. Create virtual mapping of the physical memory. + push 1Bh + push 100000h + push eax + call MapIoMem +; 3. Return. + xchg esi, eax +.return: + ret +; 1f. If we do not know DeviceID, continue saying hi with negative intonation. +.return_unknown_pciid: + pusha + mov esi, unknownmsg + call SysMsgBoardStr + popa + ret + +; Convert word in ax to hexadecimal text in edi, advance edi. +WriteWord: +; 1. Convert high byte. + push eax + mov al, ah + call WriteByte + pop eax +; 2. Convert low byte. +; Fall through to WriteByte; ret from WriteByte is ret from WriteWord too. + +; Convert byte in al to hexadecimal text in edi, advance edi. +WriteByte: +; 1. Convert high nibble. + push eax + shr al, 4 + call WriteNibble + pop eax +; 2. Convert low nibble. + and al, 0xF +; Fall through to WriteNibble; ret from WriteNibble is ret from WriteByte too. + +; Convert nibble in al to hexadecimal text in edi, advance edi. +WriteNibble: +; Obvious, isn't it? + cmp al, 10 + sbb al, 69h + das + stosb + ret + +if use_predefined_mode = 0 +; detect resolution of the flat panel +DetectMode: + push esi edi +; 1. Get the location of block of GMBUS* registers. +; Starting with Ironlake, GMBUS* registers were moved. + add esi, 5100h + cmp [deviceType], ironlake_start + jb @f + add esi, 0xC0000 +@@: +; 2. Initialize GMBUS engine. + mov edi, edid + mov ecx, 0x10000 +@@: + test byte [esi+8+1], 80h + loopnz @b + jnz .fail + mov dword [esi], 3 + test byte [esi+8+1], 4 + jz .noreset + call ResetGMBus + jnz .fail +.noreset: +; 3. Send read command. + and dword [esi+20h], 0 + mov dword [esi+4], 4E8000A1h +; 4. Wait for data, writing to the buffer as data arrive. +.getdata: + mov ecx, 0x10000 +@@: + test byte [esi+8+1], 8 + loopz @b + test byte [esi+8+1], 4 + jz .dataok + call ResetGMBus + jmp .fail +.dataok: + mov eax, [esi+0Ch] + stosd + cmp edi, edid+80h + jb .getdata +; 5. Wait for bus idle. + mov ecx, 0x10000 +@@: + test byte [esi+8+1], 2 + loopnz @b +; 6. We got EDID; dump it if DEBUG. +if DEBUG + pusha + xor ecx, ecx + mov esi, edid + mov edi, edid_text +.dumploop: + lodsb + call WriteByte + mov al, ' ' + stosb + inc cl + test cl, 15 + jnz @f + mov byte [edi-1], 13 + mov al, 10 + stosb +@@: + test cl, cl + jns .dumploop + mov esi, edidmsg + call SysMsgBoardStr + popa +end if +; 7. Test whether EDID is good. +; 7a. Signature: 00 FF FF FF FF FF FF 00. + mov esi, edid + cmp dword [esi], 0xFFFFFF00 + jnz .fail + cmp dword [esi+4], 0x00FFFFFF + jnz .fail +; 7b. Checksum must be zero. + xor edx, edx + mov ecx, 80h +@@: + lodsb + add dl, al + loop @b + jnz .fail +; 8. Get width and height from EDID. + xor eax, eax + mov ah, [esi-80h+3Ah] + shr ah, 4 + mov al, [esi-80h+38h] + mov [width], eax + mov ah, [esi-80h+3Dh] + shr ah, 4 + mov al, [esi-80h+3Bh] + mov [height], eax +; 9. Return. +.fail: + pop edi esi + ret + +; reset bus, clear all errors +ResetGMBus: +; look into the PRM + mov dword [esi+4], 80000000h + mov dword [esi+4], 0 + mov ecx, 0x10000 +@@: + test byte [esi+8+1], 2 + loopnz @b + ret +end if + +; set resolution [width]*[height] +SetMode: +; 1. Program the registers of videocard. +; look into the PRM + cli + or byte [esi+7000Ah], 0Ch ; PIPEACONF: disable Display+Cursor Planes + or byte [esi+7100Ah], 0Ch ; PIPEBCONF: disable Display+Cursor Planes + and byte [esi+7000Bh], not 80h ; PIPEACONF: disable pipe + and byte [esi+7100Bh], not 80h ; PIPEBCONF: disable pipe +; or byte [esi+71403h], 80h ; VGACNTRL: VGA Display Disable + mov edx, 10000h +@@: + mov ecx, 1000h + loop $ + test byte [esi+7000Bh], 40h ; PIPEACONF: wait until pipe disabled + jz @f + dec edx + jnz @b +.not_disabled: + sti + jmp .return +@@: + test byte [esi+7100Bh], 40h ; PIPEBCONF: wait until pipe disabled + jz @f + mov ecx, 1000h + loop $ + dec edx + jnz @b + jmp .not_disabled +@@: + lea eax, [esi+61183h] + cmp [deviceType], ironlake_start + jb @f + add eax, 0xE0000 - 0x60000 +@@: + lea edx, [esi+60000h] + test byte [eax], 40h + jz @f + add edx, 1000h +@@: + mov eax, [width] + dec eax + shl eax, 16 + mov ax, word [height] + dec eax + mov dword [edx+1Ch], eax ; PIPEASRC: set source image size + ror eax, 16 + mov dword [edx+10190h], eax ; for old cards + mov ecx, [width] + add ecx, 15 + and ecx, not 15 + shl ecx, 2 + mov dword [edx+10188h], ecx ; DSPASTRIDE: set scanline length + and byte [esi+61233h], not 80h ; PFIT_CONTROL: disable panel fitting + or byte [edx+10183h], 80h ; DSPACNTR: enable Display Plane A + or byte [edx+1000Bh], 80h ; PIPEACONF: enable pipe + and byte [edx+1000Ah], not 0Ch ; PIPEACONF: enable Display+Cursor Planes + sti +; 2. Notify the kernel that resolution has changed. + call GetDisplay + mov edx, [width] + mov dword [eax+8], edx + mov edx, [height] + mov dword [eax+0Ch], edx + mov [eax+18h], ecx + mov eax, [width] + dec eax + dec edx + call SetScreen +.return: + ret + +align 4 +hellomsg db 'Intel videocard detected, PciId=8086:' +pciid_text db '0000' + db ', which is ', 0 +knownmsg db 'known',13,10,0 +unknownmsg db 'unknown',13,10,0 + +if DEBUG +edidmsg db 'EDID successfully read:',13,10 +edid_text rb 8*(16*3+1) + db 0 +end if + +version: + dd 0x50005 + +width dd predefined_width +height dd predefined_height + +pciids: + dw 0x2582 ; i915g + dw 0x258a ; i915g + dw 0x2592 ; i915gm + dw 0x2772 ; i945g + dw 0x27a2 ; i945gm + dw 0x27ae ; i945gm + dw 0x2972 ; i965g + dw 0x2982 ; i965g + dw 0x2992 ; i965g + dw 0x29a2 ; i965g + dw 0x29b2 ; g33 + dw 0x29c2 ; g33 + dw 0x29d2 ; g33 + dw 0x2a02 ; i965gm + dw 0x2a12 ; i965gm + dw 0x2a42 ; gm45 + dw 0x2e02 ; g45 + dw 0x2e12 ; g45 + dw 0x2e22 ; g45 + dw 0x2e32 ; g45 + dw 0x2e42 ; g45 + dw 0x2e92 ; g45 + dw 0xa001 ; pineview + dw 0xa011 ; pineview +ironlake_start = ($ - pciids) / 2 + dw 0x0042 ; ironlake_d + dw 0x0046 ; ironlake_m + dw 0x0102 ; sandybridge_d + dw 0x0112 ; sandybridge_d + dw 0x0122 ; sandybridge_d + dw 0x0106 ; sandybridge_m + dw 0x0116 ; sandybridge_m + dw 0x0126 ; sandybridge_m + dw 0x010A ; sandybridge_d +pciids_num = ($ - pciids) / 2 + +align 4 +deviceType dd ? +edid rb 0x80