diff --git a/drivers/ethernet/mtd80x.asm b/drivers/ethernet/mtd80x.asm index 06ce67bd5e..6d8e70badb 100644 --- a/drivers/ethernet/mtd80x.asm +++ b/drivers/ethernet/mtd80x.asm @@ -25,8 +25,8 @@ format MS COFF __DEBUG__ = 1 __DEBUG_LEVEL__ = 2 - NUM_TX_DESC = 4 - NUM_RX_DESC = 4 + NUM_TX_DESC = 6 + NUM_RX_DESC = 12 include '../struct.inc' include '../macros.inc' @@ -646,8 +646,8 @@ reset: test eax, eax jnz @f DEBUGF 1,"Could not attach int handler!\n" -; or eax, -1 -; ret + or eax, -1 + ret @@: ; Reset the chip to erase previous misconfiguration. @@ -663,8 +663,8 @@ reset: ; Initialize other registers. ; Configure the PCI bus bursts and FIFO thresholds. - mov [device.bcrvalue], 0x10 ; little-endian, 8 burst length - mov [device.crvalue], 0xa00 ; 128 burst length + mov [device.bcrvalue], 0x10 ; little-endian, 8 burst length + mov [device.crvalue], 0xa00 ; 128 burst length cmp [device.dev_id], 0x891 jne @f @@ -699,11 +699,9 @@ reset: set_io 0 set_io ISR - mov eax, (FBE or TUNF or CNTOVF or RBU or TI or RI) + mov eax, FBE or TUNF or CNTOVF or RBU or TI or RI out dx, eax - set_io IMR -; mov eax, (FBE or TUNF or CNTOVF or RBU or TI or RI) out dx, eax ; clear packet/byte counters @@ -782,7 +780,7 @@ init_ring: GetRealAddr pop esi ecx mov [esi + mtd_desc.next_desc], eax - + mov [esi + mtd_desc.skbuff], 0 add esi, mtd_desc.size loop .tx_desc_loop @@ -1015,46 +1013,36 @@ transmit: ja .fail mov esi, [device.cur_tx] + + test [esi + mtd_desc.status], TXOWN + jnz .fail + push [esi + mtd_desc.next_desc_logical] pop [device.cur_tx] - ; todo: check if descriptor is not owned by the device! - mov eax, [esp + 4] mov [esi + mtd_desc.skbuff], eax GetRealAddr mov [esi + mtd_desc.buffer], eax mov eax, [esp + 8] + mov ecx, eax shl eax, PKTSShift ; packet size - or eax, TXLD + TXFD + CRCEnable + PADEnable + TXIC + 1536 shl TBSShift ; buffer size + shl ecx, TBSShift + or eax, ecx + or eax, TXIC + TXLD + TXFD + CRCEnable + PADEnable mov [esi + mtd_desc.control], eax - mov [esi + mtd_desc.status], TXOWN -;------------- ; Update stats - inc [device.packets_tx] mov eax, [esp+8] add dword [device.bytes_tx], eax adc dword [device.bytes_tx + 4], 0 -; Point to transmit descriptor - +; TX Poll set_io 0 - set_io TXLBA - mov eax, esi - GetRealAddr - out dx, eax - -; set_io TCRRCR -; mov eax, [device.crvalue] -; out dx, eax - -; Wake the potentially-idle transmit channel. - - set_io TXPDR ; TX Poll + set_io TXPDR xor eax, eax out dx, eax @@ -1077,11 +1065,8 @@ read_mac: set_io PAR0 lea edi, [device.mac] insd - stosd set_io PAR1 insw - stosw - DEBUGF 1,"MAC = %x-%x-%x-%x-%x-%x\n",\ [device.mac+0]:2,[device.mac+1]:2,[device.mac+2]:2,[device.mac+3]:2,[device.mac+4]:2,[device.mac+5]:2 @@ -1105,7 +1090,7 @@ int_handler: push ebx esi edi - DEBUGF 1,"int\n" + DEBUGF 1,"INT\n" ; find pointer of device wich made IRQ occur @@ -1138,50 +1123,43 @@ int_handler: test ax, RI ; receive interrupt jz .no_rx - - DEBUGF 1,"Receive interrupt\n" - .rx: push ax - .rx_loop: mov esi, [device.cur_rx] - test [esi + mtd_desc.status], RXOWN jnz .fail_rx + push ebx push .rx_complete mov ecx, [esi + mtd_desc.status] shr ecx, FLNGShift sub ecx, 4 ; we dont need CRC push ecx + DEBUGF 1,"Received %u bytes\n", ecx -;------------- ; Update stats - - add dword [device.bytes_rx], ecx - adc dword [device.bytes_rx + 4], 0 - inc dword [device.packets_rx] - + add dword[device.bytes_rx], ecx + adc dword[device.bytes_rx + 4], 0 + inc [device.packets_rx] push [esi + mtd_desc.skbuff] - jmp Eth_input .rx_complete: + pop ebx mov esi, [device.cur_rx] - mov [esi + mtd_desc.control], 1536 shl RBSShift - + push esi stdcall KernelAlloc, 1536 + pop esi mov [esi + mtd_desc.skbuff], eax call GetPgAddr mov [esi + mtd_desc.buffer], eax - mov [esi + mtd_desc.status], RXOWN - mov eax, [esi + mtd_desc.next_desc_logical] - mov [device.cur_rx], eax + push [esi + mtd_desc.next_desc_logical] + pop [device.cur_rx] jmp .rx_loop ; @@ -1195,47 +1173,35 @@ int_handler: ; outl(0, mtdx.ioaddr + RXPDR); .fail_rx: - DEBUGF 1,"RX failed\n" - + DEBUGF 1,"RX done\n" pop ax - .no_rx: + .no_rx: test ax, TI ; transmit interrupt jz .no_tx - - DEBUGF 1,"Transmit interrupt\n" + DEBUGF 1,"TX\n" push ax - lea esi, [device.tx_desc] mov ecx, NUM_TX_DESC .tx_loop: - test [esi + mtd_desc.status], TXOWN jnz .skip_this_one - mov eax, [esi + mtd_desc.skbuff] test eax, eax je .skip_this_one - mov [esi + mtd_desc.skbuff], 0 - - DEBUGF 1,"freeing buffer:%x\n", eax + DEBUGF 1,"freeing buffer: 0x%x\n", eax stdcall KernelFree, eax - .skip_this_one: mov esi, [esi + mtd_desc.next_desc_logical] loop .tx_loop - pop ax .no_tx: - - test ax, TBU - jz .no_tbu - - DEBUGF 1,"Transmit buffer unavailable!\n" - - .no_tbu: +; test ax, TBU +; jz .no_tbu +; DEBUGF 2,"Transmit buffer unavailable!\n" +; .no_tbu: .fail: pop edi esi ebx