kolibrios/kernel/branches/net/network/udp.inc
hidnplayr 2fcdc75ae8 changes in net branch:
-Further development of TCP
-Fixed a design issue in Ethernet drivers wich would cause a lot of overhead for TCP (I probably completely broke RTL8029 driver now, let's finish TCP first..)

git-svn-id: svn://kolibrios.org@1254 a494cfbc-eb01-0410-851d-a64ba20cac60
2009-11-08 18:00:01 +00:00

311 lines
7.5 KiB
PHP

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2004-2009. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;; UDP.INC ;;
;; ;;
;; Part of the tcp/ip network stack for KolibriOS ;;
;; ;;
;; Written by hidnplayr@kolibrios.org ;;
;; ;;
;; GNU GENERAL PUBLIC LICENSE ;;
;; Version 2, June 1991 ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
$Revision$
struct UDP_Packet
.SourcePort dw ?
.DestinationPort dw ?
.Length dw ? ; Length of (UDP Header + Data)
.Checksum dw ?
.Data:
ends
align 4
uglobal
UDP_PACKETS_TX rd MAX_IP
UDP_PACKETS_RX rd MAX_IP
endg
;-----------------------------------------------------------------
;
; UDP_init
;
; This function resets all UDP variables
;
; IN: /
; OUT: /
;
;-----------------------------------------------------------------
align 4
UDP_init:
xor eax, eax
mov edi, UDP_PACKETS_TX
mov ecx, 2*MAX_IP
rep stosd
ret
;-----------------------------------------------------------------
;
; UDP_Handler:
;
; Called by IPv4_handler,
; this procedure will inject the udp data diagrams in the application sockets.
;
; IN: Pointer to buffer in [esp]
; size of buffer in [esp+4]
; pointer to device struct in ebx
; UDP Packet size in ecx
; pointer to UDP Packet data in edx
; OUT: /
;
;-----------------------------------------------------------------
align 4
UDP_handler:
DEBUGF 1,"UDP_Handler\n"
; First validate, checksum:
pusha
rol cx, 8
push cx
rol cx, 8
push word IP_PROTO_UDP shl 8
push edi
push esi
mov di, [edx + UDP_Packet.Checksum]
mov [edx + UDP_Packet.Checksum], 0
mov esi, edx
xor edx, edx
call checksum_1
mov ecx, 12
mov esi, esp
call checksum_1
add esp, 12
call checksum_2
cmp di, dx
popa
jne .dump
DEBUGF 1,"UDP Checksum is correct\n"
; Look for a socket where
; IP Packet UDP Destination Port = local Port
; IP Packet SA = Remote IP
mov eax, net_sockets
.try_more:
mov bx , [edx + UDP_Packet.DestinationPort] ; get the local port from the IP Packet's UDP header
.next_socket:
mov eax, [eax + SOCKET_head.NextPtr]
or eax, eax
jz .dump
cmp [eax + SOCKET_head.Domain], AF_INET4
jne .next_socket
cmp [eax + SOCKET_head.Type], IP_PROTO_UDP
jne .next_socket
cmp [eax + SOCKET_head.end + IPv4_SOCKET.end + UDP_SOCKET.LocalPort], bx
jne .next_socket
DEBUGF 1,"found socket with matching domain, type and localport\n"
; For dhcp, we must allow any remote server to respond.
; I will accept the first incoming response to be the one
; I bind to, if the socket is opened with a destination IP address of
; 255.255.255.255
cmp [eax + SOCKET_head.end + IPv4_SOCKET.RemoteIP], 0xffffffff
je .ok1
mov ebx, [esp]
mov ebx, [ebx + ETH_FRAME.Data + IPv4_Packet.SourceAddress] ; get the Source address from the IP Packet FIXME
cmp [eax + SOCKET_head.end + IPv4_SOCKET.RemoteIP], ebx
jne .try_more ; Quit if the source IP is not valid, check for more sockets with this IP/PORT combination
DEBUGF 1,"Remote Ip matches\n"
.ok1:
mov bx, [edx + UDP_Packet.SourcePort] ; Remote port must be 0, or equal to sourceport of packet
cmp [eax + SOCKET_head.end + IPv4_SOCKET.end + UDP_SOCKET.RemotePort], 0
je .ok2
cmp [eax + SOCKET_head.end + IPv4_SOCKET.end + UDP_SOCKET.RemotePort], bx
jne .dump
.ok2:
DEBUGF 1,"Found valid UDP packet for socket %x\n", eax
lea esi, [edx + UDP_Packet.Data]
movzx ecx, [edx + UDP_Packet.Length]
rol cx , 8
sub cx , UDP_Packet.Data
mov dx , bx
lea ebx, [eax + SOCKET_head.lock]
call wait_mutex
mov [eax + SOCKET_head.end + IPv4_SOCKET.end + UDP_SOCKET.RemotePort], dx ; update remote port number
mov [eax + SOCKET_head.end + IPv4_SOCKET.RemoteIP], edi
inc [UDP_PACKETS_RX]
pop edi
add esp, 4
sub esi, edi
xchg esi, edi
jmp socket_internal_receiver
.dump:
DEBUGF 1,"Dumping UDP packet\n"
call kernel_free
add esp, 4 ; pop (balance stack)
ret
;-----------------------------------------------------------------
;
; UDP_socket_send
;
; IN: eax = socket pointer
; ecx = number of bytes to send
; esi = pointer to data
;
;-----------------------------------------------------------------
align 4
UDP_socket_send:
mov edx, dword [eax + SOCKET_head.end + IPv4_SOCKET.end + UDP_SOCKET.LocalPort] ; load local port and remote port at once
DEBUGF 1,"local port: %x, remote port: %x\n",\
[eax + SOCKET_head.end + IPv4_SOCKET.end + UDP_SOCKET.LocalPort]:4,\
[eax + SOCKET_head.end + IPv4_SOCKET.end + UDP_SOCKET.RemotePort]:4
mov ebx, [eax + SOCKET_head.end + IPv4_SOCKET.LocalIP]
mov eax, [eax + SOCKET_head.end + IPv4_SOCKET.RemoteIP]
DEBUGF 1,"Create UDP Packet (size=%u)\n",ecx
mov di , IP_PROTO_UDP
sub esp, 8 ; reserve some place in stack for later
; Create a part pseudoheader in stack,
push dword IP_PROTO_UDP shl 8
add ecx, UDP_Packet.Data
; TODO: fill in: dx = fragment id
push edx esi
call IPv4_create_packet ; TODO: figure out a way to choose between IPv4 and IPv6
cmp edi, -1
je .fail
mov [esp + 8 + 4], eax ; pointer to buffer start
mov [esp + 8 + 4 + 4], edx ; buffer size
rol cx, 8
mov [edi + UDP_Packet.Length], cx
mov [esp + 8 + 2], cx
ror cx, 8
pop esi
push edi ecx
sub ecx, UDP_Packet.Data
add edi, UDP_Packet.Data
shr ecx, 2
rep movsd
mov ecx, [esp]
and ecx, 3
rep movsb
pop ecx edi
pop dword [edi + UDP_Packet.SourcePort] ; fill in both portnumbers
mov [edi + UDP_Packet.Checksum], 0 ; set it to zero, to calculate checksum
; Checksum for UDP header + data
xor edx, edx
mov esi, edi
call checksum_1
; Checksum for pseudoheader
pushd [edi-4] ; destination address
pushd [edi-8] ; source address
mov ecx, 12
mov esi, esp
call checksum_1
add esp, 12 ; remove the pseudoheader from stack
; Now create the final checksum and store it in UDP header
call checksum_2
mov [edi + UDP_Packet.Checksum], dx
inc [UDP_PACKETS_TX]
DEBUGF 1,"Sending UDP Packet to device %x\n", ebx ;
jmp ETH_sender ;
.fail:
; todo: queue the packet
add esp, 8+12+8
ret
;---------------------------------------------------------------------------
;
; UDP_API
;
; This function is called by system function 75
;
; IN: subfunction number in bl
; device number in bh
; ecx, edx, .. depends on subfunction
;
; OUT:
;
;---------------------------------------------------------------------------
align 4
UDP_API:
movzx eax, bh
shl eax, 2
test bl, bl
jz .packets_tx ; 0
dec bl
jz .packets_rx ; 1
.error:
mov eax, -1
ret
.packets_tx:
add eax, UDP_PACKETS_TX
mov eax, [eax]
ret
.packets_rx:
add eax, UDP_PACKETS_RX
mov eax, [eax]
ret