kolibrios/kernel/branches/Kolibri-A/trunk/bus/SB/SB.INC
Artem Jerdev (art_zh) e338e5353f getting smaller and closer to real hardware...
git-svn-id: svn://kolibrios.org@2014 a494cfbc-eb01-0410-851d-a64ba20cac60
2011-07-23 15:27:18 +00:00

169 lines
4.0 KiB
Plaintext

$Revision: 1598 $
SMBUS_PCIE_ADDR equ 0xF00A0000 ; bdf0:20.0 = SB7xx SMBus PCI Config Registers
LPC_PCIE_ADDR equ 0xF00A3000 ; bdf0:20.3 = SB7xx LPC ISA bridge Config Registers
SB_SIO_INDEX equ 0x2E
SB_PM_INDEX equ 0xCD6
if PLATFORM>PLATFORM_RS780
include "bus/sb/hudson.inc"
else
include "bus/sb/sb710.inc"
end if
;---------------------------------------------------------------------
align 4
smbus_read_pciconfig:
; in: dl = reg# | out: eax = data
mov ebx, SMBUS_PCIE_ADDR
and edx, 0x0FC
mov eax, dword [ebx+edx]
ret
;------------------------------------------------
align 4
smbus_write_pciconfig:
; in: dl = reg#; eax = data
mov ebx, SMBUS_PCIE_ADDR
and edx, 0x0FC
mov dword [ebx+edx], eax
ret
;--------------------------------------------------------------------
align 4
lpc_read_pciconfig:
; in: dl = reg# | out: eax = data
mov ebx, LPC_PCIE_ADDR
and edx, 0x0FC
mov eax, dword [ebx+edx]
ret
;------------------------------------------------
align 4
lpc_write_pciconfig:
; in: dl = reg#; eax = data
mov ebx, LPC_PCIE_ADDR
and edx, 0x0FC
mov dword [ebx+edx], eax
ret
;--------------------------------------------------------------------
align 4
read_sio_cfg:
; in: al = reg# | out: al = data
push edx
mov dx, SB_SIO_INDEX
out dx, al
inc dl
in al, dx
pop edx
ret
;------------------------------------------------
align 4
write_pm_cfg:
; in: al = reg#; ah = data
;------------------------------------------------
push edx
mov dx, SB_PM_INDEX
out dx, al
inc dl
xchg al, ah
out dx, al
xchg al, ah
pop edx
ret
;--------------------------------------------------------------------
align 4
read_pm_cfg:
; in: al = reg# | out: al = data
push edx
mov dx, SB_PM_INDEX
out dx, al
inc dl
in al, dx
pop edx
ret
;------------------------------------------------
align 4
write_sio_cfg:
; in: al = reg#; ah = data
;------------------------------------------------
push edx
mov dx, SB_SIO_INDEX
out dx, al
inc dl
xchg al, ah
out dx, al
xchg al, ah
pop edx
ret
;------------------------------------------------
align 4
enter_sio_cfg_mode:
; the magic sequence to unlock the port
;------------------------------------------------
mov dx, SB_SIO_INDEX
mov eax, 0x55550187 ; low byte first
out dx, al
shr eax, 8
out dx, al
shr eax, 8
out dx, al
shr eax, 8
out dx, al
ret
;-----------------------------------------------------------------------
; ATTENTION: the functions assume that RESET# signals use pins 84 and 34
; of IT8712F SuperIO chip. These signals may be (and will be!) different
; for every particular motherboard and SIO. Please refer to your m/board
; documentation to define the correct pins and GPIO lines!
;
; Note this example DOES NOT PRETEND to be 100% correct implementation
; of PCIe hotplug techniques !!
;-----------------------------------------------------------------------
align 4
init_pcie_slot_control:
;------------------------------------------------
call enter_sio_cfg_mode
mov ax, 0x0707 ; LDN = 07
call write_sio_cfg
mov al, 0x25
call read_sio_cfg ; ah = reg25h (Multy-function pin selector)
or ah, 3 ; set bits 0, 1 (GPIO)
call write_sio_cfg
mov al, 0x2A
call read_sio_cfg ; ah = reg2Ah (Extended fn pin selector)
or ah, 3 ; set bits 0, 1 (GPIO)
call write_sio_cfg
mov al, 0xB8
call read_sio_cfg ; ah = regB8h (internal pull-up enable)
or ah, 3 ; set bits 0, 1
call write_sio_cfg
mov al, 0xC0
call read_sio_cfg ; ah = regC0h (simple IO enable)
or ah, 3 ; set bits 0, 1
call write_sio_cfg
mov ax, 0x0202 ; Lock SIO config ports
call write_sio_cfg
ret
align 4
reset_pcie_slot:
;------------------------------------------------
call enter_sio_cfg_mode
mov ax, 0x0707 ; LDN = 07
call write_sio_cfg
mov al, 0xB0
call read_sio_cfg ; ah = regB0h (Pin polarity)
and ah, 0xFC ; invert bits 0, 1
call write_sio_cfg
or ah, 3 ; restore bits 0, 1
call write_sio_cfg
mov ax, 0x0202 ; Lock SIO config ports
call write_sio_cfg
ret