kolibrios/programs/system/pcidev/trunk/PCIDEV.ASM
Evgeny Grechnikov (Diamond) 8df5cba38d icon2: russian and english variants corrected
jpegview, launcher, life, mv, pcidev: new versions from K0581 distro
rccc, rccs: english translation added

git-svn-id: svn://kolibrios.org@132 a494cfbc-eb01-0410-851d-a64ba20cac60
2006-08-18 14:32:11 +00:00

512 lines
19 KiB
NASM

;***************************************************************
; project name: PCI Device Enumeration
; target platform: KolibriOS and MenuetOS
; compiler: flat assmebler 1.63.2
; version: 1.31
; last update: 13(th) May 2006
; maintained by: Jason Delozier (cordata51)
; e-mail: cordata51@hotmail.com
; project site: http://www.asmfreaks.com/menuetos
;***************************************************************
;Summary: This program will attempt to scan the PCI Bus
; and display basic information about each device
; connected to the PCI Bus.
;***************************************************************
;HISTORY:
;keep dates in european format (dd/mm/yyyy), please
; '!' means big changes
; to-do:
;PCI version should be normalized (0210->02.10)
;----------------------------------------------------------------
;1.31: PCIDEV 13/05/2006
;Author: Jason Delozier <cordata51@hotmail.com>
;Features:
; fixed
; * ! bug in Company Name look up code that would cause Unknown Name errors.
; * ! possible bugs, many instructions missing byte, word, dword prefixes
; * ! possible bug which could have occured after removing "PREVIOUSVERSIONLIST"
; entry in loop up code and not fixing jump parameters.
; added
; * comments to various parts of the code
; optimized
; * various parts of the source, too many to remember and mention.
; * changed entries for Subclasses in vendors.inc to Byte format, saves a little space.
;----------------------------------------------------------------
;1.30: PCIDEV 11/05/2006
;Author: Sergey Kuzmin aka Wildwest <kuzmin_serg@list.ru>
;Features:
; added
; * 3 new vendor id's (ESS from Madis Kalme and 2 id's
; forgotten from 1.15 release: Broadcom -SiByte and Chaintech Comp.)
; changed
; * I don't know why other devs (Jason or Victor) changed window style
; to old ugly one, so I changed it back to skinned type 3.
; * the same goes to the use of macroc.inc - it is enabled again.
; deleted
; * there is no more label "PREVIOUSVERSIONLIST" - id's moved to the
; appropriate parts of global list.
;----------------------------------------------------------------
;1.29: PCIDEV 30/04/2006
;Author: Jason Delozier <cordata51@hotmail.com>
;Features:
; fixed
; * ! bug that would not allow devices with device
; numbers > 16 to be displayed.
; added
; * ! another heading called "FNC" (function) which allows
; the multipurpose Device/Function varible to be split and
; displayed to the user properly.
; * horizontal bars to display for easier reading.
; optimized
; * vendor/description search routines for speed and space.
;----------------------------------------------------------------
;1.25: PCIDEV 02/10/2005
;Author: Sergey Kuzmin aka Wildwest <kuzmin_serg@list.ru>
;Features:
; changed
; * ! Description is based on Class and SubClass
; now (PCI 3.0). The Names of Classes and SubClasses
; are in the end of Vendors.inc
; deleted
; * label "Descriptions" (names of Classes)
;
;----------------------------------------------------------------
;1.20: PCIDEV 16/08/2005
;Author: Victor Alberto Gil Hanla a.k.a. vhanla <vhanla@gmail.com>
;Features:
; added
; * ! many vendor lists (865)
; deleted
; * previous version's list
; changed
; * previous Company Name searching and printing
;----------------------------------------------------------------
;1.15: PCIDEV 03/06/2005
;Author: Sergey Kuzmin aka Wildwest <kuzmin_serg@list.ru>
;Features:
; added
; * quantity of devices,
; * ! detection of Company Name based on Vendor ID,
; * database of VenID (35 ID's),
; * macros.inc for smaller size,
; changed
; * interface+(skinned window),
; * VenID before DevID in 'table'(was DevID before VenID)
;----------------------------------------------------------------
;1.0: PCIDEV 30/01/2005
;Author: Jason Delozier
;Features:
; able to
; * detect PCI version,
; * quantity of PCI buses,
; * Vendor&Device ID for appropriate Device on Bus;
; * detect Revision, Class and Subclass of Device,
; * and make Description based on Class
;-------------------------------------------------------------
use32
org 0x0
db 'MENUET01'; 8 byte id
dd 0x01 ; header version
dd START ; start of code
dd I_END ; size of image
dd 0xFFFF ; memory for app = 64 KB
dd I_END ; esp
dd 0x0 , 0x0 ; I_Param , I_Icon
include 'macros.inc'
include 'VENDORS.INC'
START: ; start of execution
call draw_window
still:
mov eax,10 ; wait here for event
int 0x40
cmp eax,1 ; redraw request ?
je red
cmp eax,2 ; key in buffer ?
je key
cmp eax,3 ; button in buffer ?
je button
jmp still
red: ; redraw
mov eax, 9 ;window redraw requested so get new window coordinates and size
mov ebx, Proc_Info ;area to store process information
mov ecx, -1 ;
int 0x40 ;get the process information
mov eax,[Proc_Info+34] ;store the window coordinates into the Form Structure
mov [Form+2], ax ;x start position
mov eax,[Proc_Info+38] ;
mov [Form+6],ax ;ystart position
mov eax,[Proc_Info+42] ;
mov [Form],ax ;window width
mov eax,[Proc_Info+46] ;
mov [Form+4] ,ax ;window height
call draw_window ;go redraw window now
jmp still
key: ; key
mov eax,2 ; just read it and ignore
int 0x40
jmp still
button: ; button
mov eax,17 ; get id
int 0x40
cmp ah,1 ; button id=1 ?
jne noclose
mov eax,-1 ; close this program
int 0x40
noclose:
jmp still
; *********************************************
; ******* WINDOW DEFINITIONS AND DRAW ********
; *********************************************
Form:
dw 780 ;window width
dw 100 ;window x start
dw 420 ;window height
dw 100 ;window y start
draw_window:
mov byte [total],0
mov eax,12 ; function 12:tell os about windowdraw
mov ebx,1 ; 1, start of draw
int 0x40
; DRAW WINDOW
mov eax,0 ; function 0 : define and draw window
mov ebx, dword [Form] ; x/width of window
mov ecx, dword [Form+4] ; y/height of window
mov edx,0x03ffffff ; color of work area RRGGBB,8->color gl
mov esi,0x805080d0 ; color of grab bar RRGGBB,8->color gl
mov edi,0x005080d0 ; color of frames RRGGBB
int 0x40 ; draw the window
; WINDOW LABEL
mov eax,4 ; function 4 : write text to window
mov ebx,8*65536+8 ; [x start] *65536 + [y start]
mov ecx,0x10ddeeff ; font 1 & color ( 0xF0RRGGBB )
mov edx,labelt ; pointer to text beginning
mov esi,labellen-labelt ; text length
int 0x40
;draw captions to window
mov ebx, 20*65536+25 ;x start, ystart of text
mov ecx, 0x224466 ;color of text
mov edx, dword PCIWin ;start of text buffer
mov esi, 106 ;lenght of line
newline: ;
mov eax, 4 ;draw text system function
int 0x40 ;draw the text
add ebx, 10 ;one line down
add edx, esi ;add lenght of line to offset of text buffer
cmp byte[edx], byte 'x' ;is it the end of buffer?
jne newline ;if not draw another line of text
;Insert horizontal bars in list area
mov eax, 13 ;draw bar system function
mov ebx, 18 ;set Xstart position of bar
shl ebx, 16 ;
mov bx,word [Form] ;get width of window
sub bx, 32 ;bar is 32 pixels shorter then window width
mov ecx, 109*65536+10 ;set Ystart(109) and Height(10) of bar
mov edx, 0xb6b6b6 ;set color of bar
again: ;begin draw bar loop
int 0x40 ;draw bar to window area
shr ecx, 16 ;move the Ystart position to working area
add ecx, 34 ;add 34 pixels to Y Start (moves bar down)
cmp cx,word [Form+4] ;is the Ystart position outside of window area
jae nomo ;if so stop drawing bars
sub ecx, 14 ;if not, we only need 20 pixels between bar tops
shl ecx, 16 ;set that values as Ystart
add ecx, 10 ;Bar Height is always 10 pixels
jmp again ;draw another bar
nomo: ;done drawing bars here
;start PCI stuff
call Get_PCI_Info ;get pci version and last bus
mov cx,word [PCI_Version] ;number to draw
mov eax, 47 ;draw number system function
xor esi, esi ;color of text
mov ebx, 0x00040100 ;4 digits to draw in hex format
mov edx, 110*65536+45 ;x/y start position of number
int 0x40 ;draw pci version to window
mov cl,byte [PCI_LastBus] ;number to draw
mov ebx, 0x00020100 ;2 digits hex format
add edx, 10 ;one line below pci version
int 0x40 ;draw the last bus to window
call scan_Pci ;scan for and draw each pci device
movzx ecx, byte [total] ;number to draw
mov eax, 47 ;draw number system function
mov ebx, 0x00020000 ;2 digits to draw in decimal format
xor esi, esi ;color of text
mov edx, 150*65536+65 ;x/y position to draw to
int 0x40 ;draw total number of devices to window
mov eax,12 ; function 12:tell os about windowdraw
mov ebx,2 ; 2, end of draw
int 0x40
ret
; ***********************************************
; ******* END WINDOW DEFINITIONS & DRAW *******
; ***********************************************
;******************************************************
;* Gets the PCI Versioin and Last Bus
Get_PCI_Info:
mov eax, 62
xor ebx, ebx
int 0x40
mov word [PCI_Version], ax
mov eax, 62
mov ebx, 1
int 0x40
mov byte [PCI_LastBus], al
ret
;******************************************************
;******************************************************
;* Get all devices on PCI Bus
scan_Pci:
cmp byte [PCI_LastBus],0xff ;0xFF means no pci bus found
jne Pci_Exists ;
ret ;if no bus then leave
Pci_Exists:
mov byte [V_Bus], 0 ;reset varibles
mov byte [V_Dev], 0 ;
mov edx, 20*65536+110 ;set start write position
Start_Enum:
mov bl, 6 ;get a dword
mov bh, byte [V_Bus] ;bus of pci device
mov ch, byte [V_Dev] ;device number/function
mov cl, 0 ;offset to device/vendor id
mov eax, 62 ;pci system function
int 0x40 ;get ID's
cmp ax, 0 ;Vendor ID should not be 0 or 0xFFFF
je nextDev ;check next device if nothing exists here
cmp ax, 0xffff ;
je nextDev ;
mov word [PCI_Vendor], ax ;There is a device here, save the ID's
shr eax, 16 ;
mov word [PCI_Device], ax ;
mov eax, 62 ;PCI Sys Function
mov bl, 4 ;Read config byte
mov bh, byte [V_Bus] ;Bus #
mov ch, byte [V_Dev] ;Device # on bus
mov cl, 0x08 ;Register to read (Get Revision)
int 0x40 ;Read it
mov byte [PCI_Rev], al ;Save it
mov eax, 62 ;PCI Sys Function
mov cl, 0x0b ;Register to read (Get class)
int 0x40 ;Read it
mov byte [PCI_Class], al ;Save it
mov eax, 62 ;PCI Sys Function
mov cl, 0x0a ;Register to read (Get Subclass)
int 0x40 ;Read it
mov byte [PCI_SubClass], al ;Save it
inc byte [total] ;one more device found
call Print_New_Device ;print device info to screen
nextDev:
inc byte [V_Dev] ;next device on this bus
jnz Start_Enum ;jump until we reach zero
;(used to be JNO which caused bug!!! 30-4-2006, JMD)
mov byte [V_Dev], 0 ;reset device number
inc byte [V_Bus] ;next bus
mov al, byte [PCI_LastBus] ;get last bus
cmp byte [V_Bus], al ;was it last bus
jbe Start_Enum ;if not jump to keep searching
ret
;******************************************************
;******************************************************
;* Print device info to screen
Print_New_Device:
mov eax, 47 ;Write number to screen system function
mov ebx, 0x00040100 ;4 byte number, print in hexidecimal
xor esi, esi ;Color of text
movzx ecx,word [PCI_Vendor] ;Pointer to number to be written
int 0x40 ;Write Vendor ID
and edx, 0xFFFF ;*****************************************
or edx, 54*65536 ;X start becomes 54
movzx ecx,word [PCI_Device] ;get Vendor ID
int 0x40 ;Draw Vendor ID to Window
mov ebx, 0x00020100 ;2 digit number, in hexidecimal format
and edx, 0xFFFF ;*****************************************
or edx, 98*65536 ;X start becomes 98
movzx ecx,byte [V_Bus] ;get bus number
int 0x40 ;draw bus number to screen
and edx, 0xFFFF ;*****************************************
or edx, 128*65536 ;X start becomes 128
movzx ecx,byte [V_Dev] ;get device number
shr ecx, 3 ;device number is bits 3-7
int 0x40 ;Draw device Number To Window
and edx, 0xFFFF ;*****************************************
or edx, 155*65536 ;X start becomes 155
movzx ecx, byte [V_Dev] ;get Function number
and ecx, 7 ;function is first 3 bits
int 0x40 ;Draw Function Number To Window
and edx, 0xFFFF ;*****************************************
or edx, 179*65536 ;X start becomes 179
movzx ecx,byte [PCI_Rev] ;get revision number
int 0x40 ;Draw Revision to screen
and edx, 0xFFFF ;*****************************************
or edx, 215*65536 ;X start becomes 215
movzx ecx,byte [PCI_Class] ;get PCI_Class
int 0x40 ;Draw Class to screen
and edx, 0xFFFF ;*****************************************
or edx, 266*65536 ;X start becomes 266
movzx ecx,byte [PCI_SubClass];get sub class
int 0x40 ;Draw Sub Class to screen
;Write Names
movzx ebx, dx ;Set y position
or ebx, 310*65536 ;set Xposition to 310
;**********************************************************
;Prints the Vendor's Name based on Vendor ID
;
; modified part by vhanla (I know it is not a fastest way to search)
; it needs optimization... HELP this project!
;
; Modified on 30-04-2006 by JMD for size
;-----------------------------------------------------------------------------
;first determine which list to find the vendor in
mov ax, word [PCI_Vendor]
mov ecx, 255 ;# vendors in most lists
cmp ax,4800 ;Check if Vendor's value is less than this number
jae next1 ;if it is less, let's continue, or jump to next1
mov edx, _FIRSTPART ;select this list
jmp rep1 ;start searching list
next1: ;
cmp ax,5314 ;same thing happening here as above^
jae next2 ;
mov edx, _SECONDPART ;
jmp rep1 ;
next2: ;
cmp ax,5574 ;
jae next3 ;
mov edx, _THIRDPART ;
jmp rep1 ;
next3: ;
mov ecx, 110 ;only 110 vendors in this list
mov edx, _FOURTHPART ;
rep1:
cmp ax,word[edx+50] ;are Vendor ID's the same?
je ex ;if so jump to print the description to screen
add edx, 52 ;if not put us at start of next description
dec ecx ;one less description in list
jnz rep1 ;was it our last?
mov edx, _UNKNOWN ;if so we dont know this Vendor
ex:
;lets print the vendor Name
xor ecx, ecx ;font color
mov eax,4 ;OS CMD
mov esi,50 ;Length of text
int 0x40 ;Print the text
;------------------------------------------------------------------
;------------------------------------------------------------------
;Get description based on Class/Subclass
cmp byte [PCI_Class], 11h ;we only know of 17 classes
ja endd ;if its more then, its unknown to us, so jump
movzx eax, byte [PCI_Class] ;load our class
shl eax, 3 ;multiply for jump table
mov ecx, [ClassList+eax+4] ;number of descriptions for this class
mov edx, [ClassList+eax] ;start of description list for class
movzx eax, byte [PCI_SubClass] ;get subclass
repu1:
cmp al,byte[edx+32] ;are subclasses the same?
je endd ;if so jump to print the description to screen
add edx, 33 ;if not put us at start of next description
dec ecx ;one less description in list
jnz repu1 ;was it our last?
mov edx,_UNKNOWND ;if so its unknown device
endd:
and ebx, 0x0000FFFF ;clear X position
or ebx, 0x02300000 ;set X position to 560 pixels
xor ecx, ecx ;color of text
mov eax,4 ;draw text system function
mov esi,32 ;length of text to draw
int 0x40 ;draw the text
movzx edx, bx ;get y coordinate
add edx, 0x0014000A ;add 10 to y coordinate and set x coordinate to 20
ret
ClassList:
dd Class0 , 2, Class1 , 8, Class2, 8, Class3, 4
dd Class4 , 4, Class5 , 3, Class6, 12, Class7, 7
dd Class8 , 8, Class9 , 6, ClassA, 2, ClassB, 7
dd ClassC , 10, ClassD , 8, ClassE, 1, ClassF, 4
dd Class10, 3, Class11, 5
;------------------------------------------------------------------
; DATA AREA
labelt:
db 'PCI Device Enumeration v 1.31 by J. Delozier, S. Kuzmin and V. Hanla'
labellen:
PCIWin:
db 'Please remember to enable PCI Access to Applications in Setup Menu.'
db ' '
db ' '
db ' '
db 'PCI Version = '
db ' '
db 'Last PCI Bus = '
db ' '
db 'Quantity of devices = '
db ' '
db ' '
db ' '
db 'VenID DevID Bus# Dev# Fnc Rev Class Subclass Comp'
db 'any Description '
db '----- ----- ---- ---- --- --- ----- -------- --------------------'
db '---------------------- ----------------'
db 'x'
total db 0
V_Bus db 0
V_Dev db 0
PCI_Version dw 0
PCI_LastBus db 0
PCI_Device dw 0
PCI_Vendor dw 0
PCI_Bus db 0
PCI_Dev db 0
PCI_Rev db 0
PCI_Class db 0
PCI_SubClass db 0
Proc_Info:
times 1024 db 0
I_END: