kolibrios-fun/programs/develop/objconv/disasm.h

844 lines
55 KiB
C
Raw Normal View History

/**************************** disasm.h **********************************
* Author: Agner Fog
* Date created: 2007-02-21
* Last modified: 2014-12-06
* Project: objconv
* Module: disasm.h
* Description:
* Header file for disassembler
*
* Copyright 2007-2014 GNU General Public License http://www.gnu.org/licenses
*****************************************************************************/
#ifndef DISASM_H
#define DISASM_H
// Define tabulator positions for output
#define AsmTab1 8 // Column for opcode
#define AsmTab2 16 // Column for first operand
#define AsmTab3 56 // Column for comment
#define ReplaceIllegalChars 0 // 1 if you want to replace illegal characters in symbol names
// Structure for defining x86 opcode maps
struct SOpcodeDef {
const char * Name; // opcode name
uint32 InstructionSet; // mmx, sse, 3dnow, x64, etc.
uint32 AllowedPrefixes; // prefixes allowed for this opcode
uint16 InstructionFormat; // opcode type, number of operands
uint16 Destination; // type and size of destination operand
uint16 Source1; // type and size of 1. source operand
uint16 Source2; // type and size of 2. source operand
uint16 Source3; // type and size of 3. source operand
uint16 EVEX; // options for interpreting EVEX prefix, may be used for 4. source operand otherwise (unused)
uint16 MVEX; // options for interpreting MVEX prefix: swizzle, convert, mask options
uint16 TableLink; // this entry is a link to another map
uint16 Options; // miscellaneous options
};
/**************** Constants for opcode definition **********************
I have deliberately not assigned names to these constants because this would
make the tables in opcodes.cpp wery broad with many constant names OR'ed together.
It would be almost impossible to align the columns in a readable way.
Sorry that you have to look up the constants here.
The following tables define the possible values for each field in SOpcodeDef:
Name:
-----
Opcode mnemonic
InstructionSet:
(Some values can be OR'ed):
---------------------------
0: 8086
1: 80186
2: 80286
3: 80386
4: 80486, cpuid
5: Pentium
6: Pentium Pro, cmov, fcomi
7: MMX
8: Pentium II
0x11: SSE
0x12: SSE2
0x13: SSE3
0x14: Suppl. SSE3
0x15: SSE4.1
0x16: SSE4.2
0x17: AES
0x18: CLMUL
0x19: AVX
0x1A: FMA3
0x1C: AVX2
0x1D: BMI1, BMI2, ADX, RDRAND, RDSEED, INVPCID, SMAP, PRFCHW, F16C, Transactional Synchronization
0x20: AVX512F,BW,DQ,VL
0x21: AVX512PF,ER,CD
0x22: SHA,TBD
0x23: AVX512IFMA,VBMI
0x24: AVX512_4FMAPS, ..
0x80: MIC Knights Corner
0x100: 8087
0x101: 80387
0x800: Privileged instruction
0x1001: AMD 3DNow
0x1002: AMD 3DNow extension
0x1004: AMD SSE4a or AMD virtualization
0x1005: AMD XOP
0x1006: AMD FMA4
0x1007: AMD TBM
0x2001; VIA
0x4000: Only available in 64 bit mode
0x8000: Not available in 64 bit mode
0x10000: Proposed instruction code, preliminary specification
0x20000: Proposed instruction code never implemented, preliminary specification later changed
AllowedPrefixes:
(Values can be OR'ed):
----------------------
0: No prefix allowed other than possibly segment and address size prefixes if there is a mod/reg/rm byte
1: Address size prefix allowed, even if no mod/reg/rm byte
2: This is a stack operation. Address size prefix will truncate the stack pointer. Make warning if address size prefix or operand size prefix
4: Segment prefix allowed, even if no mod/reg/rm byte
8: Branch prediction hint prefix allowed (on Pentium 4) or BND prefix allowed
0x10: LOCK prefix allowed
0x20: REP prefix allowed
0x40: REPE/REPNE prefix allowed
0x80: This is a jump operation. 66 prefix will truncate EIP. Make warning if 66 prefix in 32 bit mode. 66 prefix not allowed in 64 bit mode.
0x100: 66 prefix determines integer operand size
0x200: 66 prefix allowed for other purpose. Typical meanings are:
* indicates packed integer xmm vs. mmx,
* indicates packed double precision xmm (pd) vs. packed single (ps)
* always required
0x400: F3 prefix allowed for other purpose. Typical = scalar single precision xmm (ss)
0x800: F2 prefix allowed for other purpose. Typical = scalar double precision xmm (sd)
0xC40: F2 and F3 prefix allowed for XACQUIRE and XRELEASE
0xE00: none/66/F2/F3 prefix indicate ps/pd/sd/ss vector
0x1000: REX.W prefix determines integer g.p. operand size or fp precision or swaps operands or other purpose
0x2000: REX.W prefix allowed but unnecessary
0x3000: REX.W prefix determines integer (vector) operand size d/q or ps/pd
0x4000: VEX.W prefix determines integer (vector) operand size b/w
0x5000: VEX.W and 66 prefix determines integer operand size b/w/d/q (mask instructions. B = 66W0, W = _W0, D = 66W1, Q = _W1)
0x7000: REX.W prefix swaps last two operands (AMD)
0x8000: Instruction not allowed without 66/F2/F3 prefix as specified by previous bits
0x10000: VEX or XOP prefix allowed
0x20000: VEX or EVEX or XOP prefix required
0x40000: VEX.L prefix allowed
0x80000: VEX.vvvv prefix allowed
0x100000:VEX.L prefix required
0x200000:VEX.L prefix allowed only if pp bits < 2
0x400000:MVEX prefix allowed
0x800000:EVEX prefix allowed
InstructionFormat:
(Values can be OR'ed):
----------------------
0: Illegal opcode.
1: No mod/reg/rm byte. Operands are implicit
2: No mod/reg/rm byte. No operands (other than possibly immediate operand)
3: No mod/reg/rm byte. Register operand indicated by bits 0-2
4: Has VEX or EVEX prefix and no mod/reg/rm byte, Register operand, if any, indicated by VEX.v
0x10: Has mod/reg/rm byte and possibly a SIB byte
0x11: Has mod/reg/rm byte and one register/memory operand
0x12: Has mod/reg/rm byte, a register destination operand and a register/memory source operand
0x13: Has mod/reg/rm byte, a register/memory destination operand and a register source operand
0x14: Has mod/reg/rm byte and AMD DREX byte. One destination and two source operands and possibly an immediate byte operand (AMD SSE5 instructions never implemened)
0x15: Has mod/reg/rm byte and AMD DREX byte. One destination and three source operands. One of the source operands is equal to the destination operand (AMD SSE5 instructions never implemened)
0x18: Has VEX or EVEX prefix and 2 operands. (NDD) Dest = VEX.v, src = rm, opcode extension in r bits. Src omitted if no VEX prefix.
0x19: Has VEX or EVEX prefix and 3 operands. (NDS) Dest = r, src1 = VEX.v, src2 = rm. Src1 omitted if no VEX prefix. May swap src1 and src2 if VEX.W = 0
0x1A: Has VEX prefix and 3 operands. Dest = rm, src1 = VEX.v, src2 = r
0x1B: Has VEX prefix and 3 operands. Dest = r, src1 = rm, src2 = VEX.v.
0x1C: Has VEX prefix and 4 operands. Dest = r, src1 = VEX.v, src2 = rm, src3 = bits 4-7 of immediate byte. May swap src2 and src3 if VEX.W
0x1D: Has VEX prefix and 4 operands. Dest = r, src1 = bits 4-7 of immediate byte, src2 = rm, src3 = VEX.v. May swap src2 and src3 if VEX.W
0x1E: Has VEX prefix VSIB and 2 or 3 operands. Dest = r or rm, src1 = rm or r, src2 = VEX.v or k register or none. VSIB byte required (rm operand & 0xF00 = index register size, rm operand & 0xFF = operand size)
0x20: Has 2 bytes immediate operand (ret i) or 1 + 1 bytes (insrtq)
0x40: Has 1 byte immediate operand or short jump
0x60: Has 2 + 1 = 3 bytes immediate operand (enter)
0x80: Has 2 or 4 bytes immediate operand or near jump
0x100: Has a 2, 4 or 8 bytes immediate operand
0x200: Has a 2+2 or 4+2 far direct jump operand
0x400: Has a 2, 4 or 8 bytes direct memory operand
0x800: Has a far indirect memory operand, dword, fword or tbyte
0x2000: Opcode reserved for future extensions
0x4000: Undocumented opcode or illegal (undocumented if name specified, otherwise illegal or unknown)
0x8000: This is a prefix, not an opcode
0x8001: This is a segment prefix
Destination and Source operand types,
used by SOpcodeDef::Destination, SOpcodeDef::Source, and CDisassembler::s.Operands[].
Many of the bit values can be OR'ed. If an instruction has two source operands, then
the values for these two operands are OR'ed (e.g. imul eax,ebx,9; shrd eax,ebx,cl).
-------------------------------------------------------------------------------------
0: No explicit operand
1: 8 bit integer
2: 16 bit integer
3: 32 bit integer
4: 64 bit integer
5: 80 bit integer memory
6: integer memory, other size
7: 48 bit memory
8: 16 or 32 bit integer, depending on 66 prefix
9: 16, 32 or 64 bit integer, depending on 66 or REX.W prefix. (8 bit in some cases as indicated by AllowedPrefixes)
0x0A: 16, 32 or 64 bit integer, default size = address size (REX.W not needed)
0x0B: 16, 32 or 64 bit near indirect pointer (jump)
0x0C: 16, 32 or 64 bit near indirect pointer (call)
0x0D: 16+16, 32+16 or 64+16 bits far indirect pointer (jump or call)
0x11: 8 bit constant, unsigned
0x12: 16 bit constant, unsigned
0x13: 32 bit constant, unsigned
0x18: 16 or 32 bit constant, unsigned
0x19: 16, 32 or 64 bit constant, unsigned
0x21: 8 bit constant, signed
0x22: 16 bit constant, signed
0x23: 32 bit constant, signed
0x28: 16 or 32 bit constant, signed
0x29: 16, 32 or 64 bit constant, signed
0x31: 8 bit constant, hexadecimal
0x32: 16 bit constant, hexadecimal
0x33: 32 bit constant, hexadecimal
0x34: 64 bit constant, hexadecimal
0x38: 16 or 32 bit constant, hexadecimal
0x39: 16, 32 or 64 bit constant, hexadecimal
0x40: float x87, unknown size or register only
0x43: 32 bit float x87, single precision
0x44: 64 bit float x87, double precision
0x45: 80 bit float x87, long double precision
0x48: float SSE, unknown size
0x4A: 16 bit float, half precision
0x4B: 32 bit float SSE, single precision (ss) or packed (ps)
0x4C: 64 bit float SSE2, double precision (sd) or packed (pd)
0x4F: XMM float. Size depends on prefix: none = ps, 66 = pd, F2 = sd, F3 = ss; or VEX.W bit = sd/pd
0x50: Full vector, aligned
0x51: Full vector, unaligned
0x81: Short jump destination, 8 bits
0x82: Near jump destination, 16 or 32 bits, depending on operand size
0x83: Near call destination, 16 or 32 bits, depending on operand size
0x84: Far jump destination, 16+16 or 32+16 bits, depending on operand size
0x85: Far call destination, 16+16 or 32+16 bits, depending on operand size
0x91: segment register
0x92: control register
0x93: debug register
0x94: test register (obsolete or undocumented)
0x95: k0 - k7 mask register. 16 bits if memory operand, 32-64 bits if register
0x96: (reserved for future mask register > 16 bits)
0x98: bnd0 - bnd3 bounds register
0xa1: al
0xa2: ax
0xa3: eax
0xa4: rax
0xa8: ax or eax
0xa9: ax, eax or rax
0xae: xmm0
0xaf: st(0)
0xb1: 1
0xb2: dx
0xb3: cl
0xc0: [bx], [ebx] or [rbx]
0xc1: [si], [esi] or [rsi]
0xc2: es:[di], es:[edi] or [rdi]
// The following values can be added to specify vectors
0x100: Vector MMX or XMM or YMM or ZMM, depending on 66 prefix and VEX.L prefix and EVEX.LL prefix
0x200: Vector XMM, YMM or ZMM, depending on VEX.L prefix and EVEX.LL prefix
0x300: Vector MMX (8 bytes)
0x400: Vector XMM (16 bytes)
0x500: Vector YMM (32 bytes)
0x600: Vector ZMM (64 bytes)
0x700: Future ??? (128 bytes)
0xF00: Vector half the size defined by VEX.L prefix and EVEX.LL prefix. Minimum size = 8 bytes for memory, xmm for register
// The following values can be added to specify operand type
0x1000: Must be register, memory operand not allowed
0x2000: Must be memory, register operand not allowed
// The following bit values apply to CDisassembler::s.Operands[] only:
0x10000: Direct memory operand without mod/reg/rm byte
0x20000: Register operand indicated by last bits of opcode and B bit
0x30000: Register or memory operand indicated by mod and rm bits of mod/reg/rm byte and B,X bits
0x40000: Register operand indicated by reg bits of mod/reg/rm byte and R bit
0x50000: Register operand indicated by dest bits of DREX byte
0x60000: Register operand indicated by VEX.vvvv bits
0x70000: Register operand indicated by bits 4-7 of immediate operand
0x80000: (Register operand indicated by bits 0-3 of immediate operand. unused, reserved for future use)
0x100000: Immediate operand using immediate field or first part of it
0x200000: Immediate operand using second part of immediate field
0x1000000: Is code
0x2000000: Is supposed to be code, but dubious
0x4000000: Is data
// The following bit values applies only to symbol types originating from object file
0x40000000: Gnu indirect function (CPU dispatcher)
0x80000000: Symbol is a segment (in COFF file symbol table)
EVEX:
--------
This field indicates the meaning of the z, L'L, b and aaa bits of an EVEX prefix.
(The EVEX field may also be used in the future for indicating an extra operand
if it is not needed for its current purpose).
Bit 0-3 indicate meaning of L'L, b field:
0x01 broadcast allowed for memory operand, LL indicate vector length
0x02 SAE allowed for register operands, no rounding control, LL indicate vector length
0x06 rounding control and SAE allowed for register operands
0x08 Scalar. LL ignored
Bit 4-7 indicate mask use in aaa/kkk field
0x00 no masking. aaa must be zero
0x10 allow masking, not zeroing
0x20 allow masking and zeroing
0x50 allow masking, not zeroing. aaa must be nonzero
0x80 mask is modified by instruction
Bit 12-15 indicate offset multiplier
0x0000 Multiplier corresponds to memory operand size
0x1000 Multiplier corresponds to vector element size
0x2200 Multiplier corresponds to half the size of the largest vector operand
0x2400 Multiplier corresponds to 1/4 of the size of the largest vector operand
0x2600 Multiplier corresponds to 1/8 of the size of the largest vector operand
MVEX:
--------
This field indicates the meaning of the sss, e and kkk bits of an MVEX prefix.
(The MVEX field may also be used in the future for indicating an extra operand
if it is not needed for its current purpose).
Bit 0-4 indicate meaning of sss field:
0. none, sss must be 0
1. sss ignored or used only for sae, offset multiplier defined, vector size defined
2. sss ignored or used only for sae, offset multiplier defined, vector size not defined by sss
3. reserved for future use
4. Sf32. 32-bit float operand. permutation if register, broadcast or conversion if memory operand
5. Sf64. 64-bit float operand. permutation if register, broadcast if memory operand
6. Si32. 32-bit integer operand. permutation if register, broadcast or conversion if memory operand
7. Si64. 64-bit integer operand. permutation if register, broadcast if memory operand
8. Uf32. 32-bit float memory operand. Up conversion from smaller integer or float operand
9. Uf64. 64-bit float memory operand. Currently no conversion supported
0xA. Ui32. 32-bit integer memory operand. Up conversion from smaller integer operand
0xB. Ui64. 64-bit integer memory operand. Currently no conversion supported
0xC. Df32. 32-bit float memory operand. Down conversion to smaller integer or float operand
0xD. Df64. 64-bit float memory operand. Currently no conversion supported
0xE. Di32. 32-bit integer memory operand. Down conversion to smaller integer operand
0xF. Di64. 64-bit integer memory operand. Currently no conversion supported
0x10. Uf32, broadcast * 4, vbroadcastf32x4
0x11. Uf64, broadcast * 4, vbroadcastf64x4
0x12. Ui32, broadcast * 4, vbroadcasti32x4
0x13. Ui64, broadcast * 4, vbroadcasti64x4
0x14. Si32, half size, vcvtdq2pd, vcvtudq2pd
0x15. Sf32, half size, vcvtps2pd
0x16. Sf32, without register swizzle and limited broadcast, vfmadd233ps
Bit 6-7 indicate offset multiplier
0x00 No broadcast. Multiplier corresponds to conversion
0x40 Broadcast, gather and scatter instructions. Multiplier corresponds to element size before conversion
Bit 8-10 indicate alternative meaning of sss field for register operand when E bit is 1:
0x000. E bit not allowed for register operand
0x100. sss specifies rounding mode
0x200. high s bit indicates suppress all exceptions {sae}
0x300. sss specifies rounding mode and sae
0x400. no rounding and no sae. sss bits ignored when E = 1
Bit 11 ignore E bit
0x000. The E bit means cache eviction hint
0x800. The E bit is ignored for memory operands or has a different meaning
Bit 12-13 indicate meaning of kkk field
0x0000. kkk bits unused, must be 0
0x1000. kkk bits specify register used for masked operation
0x2000. kkk bits specify mask register as destination operand
0x3000. kkk bits specify mask register used both for masked operation and as destination operand
The multiplier for single-byte address offsets is derived from the meaning of the sss field.
TableLink:
----------
Used for linking to another opcode table when more than one opcode begins
with the same bytes or when different specifications are needed in different
cases. When TableLink is nonzero then InstructionSet is an index into
OpcodeTables pointing to a subtable. The subtable is indexed according to
the criterion defined by TableLink.
0: No link to other table
1: Use following byte as index into next table (256 entries)
2: Use reg field of mod/reg/rm byte as index into next table (8 entries)
3: Use mod < 3 vs. mod == 3 as index (0: memory operand, 1: register operand)
4: Use mod and reg fields of mod/reg/rm byte as index into next table,
first 8 entries indexed by reg for mod < 3, next 8 entries indexed by reg for mod = 3.
5: Use rm bits of mod/reg/rm byte as index into next table (8 entries)
6: Use immediate byte after any operands as index into next table. Note: Instruction format must be specified
7: Use mode as index into next table (0: 16 bits, 1: 32 bits, 2: 64 bits)
8: Use operand size as index into next table (0: 16 bits, 1: 32 bits, 2: 64 bits)
9: Use prefixes as index into next table (0: none, 1: 66, 2: F2, 3: F3)
0x0A: Use address size as index into next table (0: 16 bits, 1: 32 bits, 2: 64 bits)
0x0B: Use VEX prefix and VEX.L bits as index into next table (0: VEX absent, 1: VEX.L=0, 2: VEX.L=1, 3:MVEX or EVEX.LL=2, 4: EVEX.LL=3)
0x0C: Use VEX.W bit as index into next table (0: VEX.W=0, 1: VEX.W=1)
0x0D: Use vector size by VEX.L bits as index into next table (0: VEX.L=0, 1: VEX.L=1, 2:MVEX or EVEX.LL=2, 3: EVEX.LL=3)
0x0E: Use VEX prefix type as index into next table. (0: 2- or 3-bytes VEX or none, 1: 4-bytes EVEX or MVEX)
0x0F: Use MVEX.E bit as index into next table. (0: MVEX.E = 0 or no MVEX, 1: MVEX.E = 1)
0x10: Use assembly language dialect as index into next table (0: MASM, 1: NASM/YASM, 2: GAS)
0x11: Use VEX prefix type as index into next table. (0: none, 1: VEX prefix, 2: EVEX prefix, 3: MVEX prefix)
Options:
(Values can be OR'ed):
----------------------
1: Append suffix for operand size or type to opcode name (prefix 0x100: b/w/d/q, 0xE00: ps/pd/ss/sd, 0x1000: s/d, 0x3000: d/q, 0x4000: b/w)
2: Prepend 'v' to opcode name if VEX prefix present
4: Does not change destination register
8: Can change registers other than explicit destination register (includes call etc.)
0x10: Unconditional jump. Next instruction will not be executed unless there is a jump to it.
0x20: Code prefixes explicitly. Assembler cannot code prefixes on this instruction
0x40: Instruction may be used as NOP or filler
0x80: Shorter version of instruction exists for certain operand values
0x100: Aligned. Memory operand must be aligned, even if VEX prefixed
0x200: Unaligned. Unaligned memory operand always allowed.
0x400: Opcode name differs if 64 bits
0x800: Do not write size specifier on memory operand
0x1000: Append alternative suffix to opcode name (prefix 0x3000: "32"/"64")
*/
// Structure for opcode swizzle table entries indicating meaning of EVEX.sss bits
struct SwizSpec {
uint32 memop; // memory operand type
uint32 memopsize; // memory operand size = byte offset multiplier = required alignment
uint32 elementsize; // memory operand size for broadcast, gather and scatter instructions
const char * name; // name of permutation, conversion or rounding
};
// Define data structures and classes used by class CDisassembler:
// Structure for properties of a single opcode during disassembly
struct SOpcodeProp {
SOpcodeDef const * OpcodeDef; // Points to entry in opcode map
uint8 Prefixes[8]; // Stores the last prefix encountered in each category
uint8 Conflicts[8]; // Counts prefix conflicts as different prefixes in the same category
uint32 Warnings1; // Warnings about conditions that could be intentional and suboptimal code
uint32 Warnings2; // Warnings about possible misinterpretation
uint32 Errors; // Errors that will prevent execution or are unlikely to be intentional
uint32 AddressSize; // Address size: 16, 32 or 64
uint32 OperandSize; // Operand size: 16, 32 or 64
uint32 MaxNumOperands; // Number of opcode table operands to check
uint32 Mod; // mod bits of mod/reg/rm byte
uint32 Reg; // reg bits of mod/reg/rm byte
uint32 RM; // r/m bits of mod/reg/rm byte
uint32 MFlags; // Memory operand type: 1=has memory operand, 2=has mod/reg/rm byte, 4=has SIB byte, 8=has VEX or DREX byte, 0x100=is rip-relative
uint32 BaseReg; // Base register + 1. (0 if none)
uint32 IndexReg; // Index register + 1. (0 if none)
uint32 Scale; // Scale factor = 2^Scale
uint32 Vreg; // ~VEX.vvvv or AMD DREX byte
uint32 Kreg; // EVEX.aaa = MVEX.kkk mask register
uint32 Esss; // EVEX.zLLb = MVEX.Esss option bits
SwizSpec const * SwizRecord; // Selected entry in MVEX table for MVEX code
uint32 OffsetMultiplier; // Multiplier for 1-byte offset calculated from EVEX or obtained from MVEX.sss and table lookup
uint32 Operands[5]; // Operand types for destination, source, immediate
uint32 OpcodeStart1; // Index to first opcode byte, after prefixes
uint32 OpcodeStart2; // Index to last opcode byte, after 0F, 0F 38, etc., before mod/reg/rm byte and operands
uint32 AddressField; // Beginning of address/displacement field
uint32 AddressFieldSize; // Size of address/displacement field
uint32 AddressRelocation; // Relocation pointing to address field
uint32 ImmediateField; // Beginning of immediate operand or jump address field
uint32 ImmediateFieldSize; // Size of immediate operand or jump address field
uint32 ImmediateRelocation; // Relocation pointing to immediate operand or jump address field
const char * OpComment; // Additional comment for opcode
void Reset() { // Set everything to zero
memset(this, 0, sizeof(*this));}
};
// The meaning of each bit in s.Warnings and s.Errors is given in
// AsmErrorTexts and AsmWarningTexts in the beginning of disasm.cpp
// Prefix categories used by s.Prefixes[category]
// 0: Segment prefix (26, 2E, 36, 3E, 64, 65)
// 1: Address size prefix (67)
// 2: Lock prefix (F0)
// 3: Repeat prefix (F2, F3) or VEX prefix (C4, C5) or EVEX, MVEX (62) or XOP (8F)
// 4: Operand size prefix (66, REX.W)
// 5: Operand type prefix (66, F2, F3)
// 6: VEX prefix: bit 5: VEX.L (vector length), bit 0-4: VEX.mmmmm
// MVEX: bit 5 = 0, bit 6 = 1. EVEX: bit 5 = 1, bit 6 = 1
// 7: Rex prefix (40 - 4F), VEX.W,R,X,B, DREX.W,R,X,B
// bit 0: B = extension of mod/rm or base or opcode
// bit 1: X = extension of index register
// bit 2: R = extension of reg bits
// bit 3: W = 64 bit operand size, or swap operands or other use of VEX.W
// bit 4: 2-bytes VEX prefix
// bit 5: 3 or 4-bytes VEX prefix
// bit 6: REX prefix
// bit 7: XOP prefix or DREX byte (AMD only)
// Note that the 66 and REX.W prefixes belong to two categories. The interpretation
// is determined by AllowedPrefixes in SOpcodeDef
// Structure for tracing register values etc.
// See CDisassembler::UpdateTracer() in disasm.cpp for an explanation
struct SATracer {
uint8 Regist[16]; // Defines the type of information contained in each g.p. register
uint32 Value[16]; // Meaning depends on the value of Regist[i]
void Reset() { // Set to zero
*(uint64*)Regist = 0; *(uint64*)(Regist+8) = 0;
}
};
// Structure for defining section
struct SASection {
uint8 * Start; // Point to start of binary data
uint32 SectionAddress; // Address of section (image relative)
uint32 InitSize; // Size of initialized data in section
uint32 TotalSize; // Size of initialized and uninitialized data in section
uint32 Type; // 0 = unknown, 1 = code,
// 2 = data, 3 = uninitialized data only, 4 = constant data,
// 0x10 = debug info, 0x11 = exception info.
// 0x800 = segment group
// 0x1000 = communal section
uint32 Align; // Alignment = 1 << Align
uint32 WordSize; // Word size, 16, 32, 64
uint32 Name; // Name, as index into CDisassembler::NameBuffer
int32 Group; // Group that the segment is member of. 0 = none, -2 = flat, > 0 = defined group
};
// Structure for defining relocation or cross-reference
struct SARelocation {
int32 Section; // Section of relocation source
uint32 Offset; // Offset of relocation source into section
uint32 Type; // Relocation types:
// 0 = unknown, 1 = direct, 2 = self-relative, 4 = image-relative,
// 8 = segment relative, 0x10 = relative to arbitrary ref. point,
// 0x21 = direct, has already been relocated to image base (executable files only)
// 0x41 = direct, make entry in procedure linkage table. Ignore addend (executable files only)
// 0x81 = direct to Gnu indirect function PLT entry
// 0x100 = segment address/descriptor, 0x200 = segment of symbol,
// 0x400 = segment:offset far
// 0x1001 = reference to GOT entry relative to GOT. 0x1002 = self-relative reference to GOT or GOT-entry
// 0x2002 = self-relative to PLT
uint32 Size; // 1 = byte, 2 = word, 4 = dword, 6 = fword, 8 = qword
int32 Addend; // Addend to add to target address,
// including distance from source to instruction pointer in self-relative addresses,
// not including inline addend.
uint32 TargetOldIndex; // Old symbol table index of target
uint32 RefOldIndex; // Old symbol table index of reference point if Type = 8, 0x10, 0x200
int operator < (const SARelocation & y) const{// Operator for sorting relocation table by source address
return Section < y.Section || (Section == y.Section && Offset < y.Offset);}
};
// Structure for indicating where a function begins and ends
struct SFunctionRecord {
int32 Section; // Section containing function
uint32 Start; // Offset of function start
uint32 End; // Offset of function end
uint32 Scope; // Scope of function. 0 = inaccessible, 1 = function local, 2 = file local, 4 = public, 8 = weak public, 0x10 = communal, 0x20 = external
// 0x10000 means End not known, extend it when you pass End
uint32 OldSymbolIndex; // Old symbol table index
int operator < (const SFunctionRecord & y) const{// Operator for sorting function table by source address
return Section < y.Section || (Section == y.Section && Start < y.Start);}
};
// Structure for defining symbol
struct SASymbol {
int32 Section; // Section number. 0 = external, -1 = absolute symbol, -16 = section to be found from image-relative offset
uint32 Offset; // Offset into section. (Value for absolute symbol)
uint32 Size; // Number of bytes used by symbol or function. 0 = unknown
uint32 Type; // Use values listed above for SOpcodeDef operands. 0 = unknown type
uint32 Name; // Name, as index into CDisassembler::SymbolNameBuffer. 0 = no name yet
uint32 DLLName; // Name of DLL if symbol imported by dynamic linking
uint32 Scope; // 0 = inaccessible, 1 = function local, 2 = file local, 4 = public, 8 = weak public, 0x10 = communal, 0x20 = external, 0x100 = has been written
uint32 OldIndex; // Index in original symbol table. Used for tracking relocation entries
void Reset() { // Set everything to zero
memset(this, 0, sizeof(*this));}
int operator < (const SASymbol & y) const { // Operator for sorting symbol table
return Section < y.Section || (Section == y.Section && Offset < y.Offset);}
};
// Define class CSymbolTable
class CSymbolTable {
public:
CSymbolTable(); // Constructor
uint32 AddSymbol(int32 Section, uint32 Offset,// Add a symbol from original file
uint32 Size, uint32 Type, uint32 Scope,
uint32 OldIndex, const char * Name, const char * DLLName = 0);
uint32 NewSymbol(int32 Section, uint32 Offset, uint32 Scope); // Add symbol to list
uint32 NewSymbol(SASymbol & sym); // Add symbol to list
void AssignNames(); // Assign names to symbols that do not have a name
uint32 FindByAddress(int32 Section, uint32 Offset, uint32 * Last, uint32 * NextAfter = 0); // Find symbols by address
uint32 FindByAddress(int32 Section, uint32 Offset); // Find symbols by address
uint32 Old2NewIndex(uint32 OldIndex); // Translate old symbol index to new index
SASymbol & operator [](uint32 NewIndex) { // Access symbol by new index
return List[NewIndex];}
const char * HasName(uint32 symo); // Ask if symbol has a name, input = old index, output = name or 0
const char * GetName(uint32 symi); // Get symbol name by new index. (Assign a name if none)
const char * GetNameO(uint32 symo); // Get symbol name by old index. (Assign a name if none)
const char * GetDLLName(uint32 symi); // Get import DLL name
void AssignName(uint32 symi, const char *name); // Give symbol a specific name
uint32 GetLimit() {return OldNum;} // Get highest old symbol number + 1
uint32 GetNumEntries() {return List.GetNumEntries();}// Get highest new symbol number + 1
protected:
CSList<SASymbol> List; // List of symbols, sorted by address
CMemoryBuffer SymbolNameBuffer; // String buffer for names of symbols
CSList<uint32> TranslateOldIndex; // Table to translate old symbol index to new symbol index
void UpdateIndex(); // Update TranslateOldIndex
uint32 OldNum; // = 1 + max OldIndex
uint32 NewNum; // Number of entries in List
uint32 UnnamedNum; // Number of unnamed symbols
public:
const char * UnnamedSymbolsPrefix; // Prefix for names of unnamed symbols
const char * UnnamedSymFormat; // Format string for giving names to unnamed symbols
const char * ImportTablePrefix; // Prefix for pointers in import table
};
// Define class CDisassembler
// Instructions for use:
// The calling program must first define the imagebase, if any, by calling
// Init. Define all sections by calls to AddSection.
// Then define all symbols and relocations or cross-references by calls to
// AddSymbol and AddRelocation.
// Then call Go().
// Go() and its subfunctions will sort Symbols and Relocations, add all
// nameless symbols to its symbol table and give them names, assign types
// to all symbols as good as possible from the available information, and
// find where each function begins and ends. Then it will disassemble the
// code and fill OutFile with the disassembly.
class CDisassembler {
public:
CDisassembler(); // Constructor. Initializes tables etc.
void Go(); // Do the disassembly
void Init(uint32 ExeType, int64 ImageBase); // Define file type and imagebase if executable file
// ExeType: 0 = object, 1 = position independent shared object, 2 = executable file
// Set ExeType = 2 if addresses have been relocated to a nonzero image base and there is no base relocation table.
void AddSection( // Define section to be disassembled
uint8 * Buffer, // Buffer containing raw data
uint32 InitSize, // Size of initialized data in section
uint32 TotalSize, // Size of initialized and uninitialized data in section
uint32 SectionAddress, // Start address of section (image relative)
uint32 Type, // 0 = unknown, 1 = code, 2 = data, 3 = uninitialized data, 4 = constant data
uint32 Align, // Alignment = 1 << Align
uint32 WordSize, // Segment word size: 16, 32 or 64
const char * Name, // Name of section
uint32 NameLength = 0); // Length of name if not zero terminated
uint32 AddSymbol( // Define symbol for disassembler
int32 Section, // Section number (1-based). 0 = external, -1 = absolute, -16 = Offset contains image-relative address
uint32 Offset, // Offset into section. (Value for absolute symbol)
uint32 Size, // Number of bytes used by symbol or function. 0 = unknown
uint32 Type, // Symbol type. Use values listed above for SOpcodeDef operands. 0 = unknown type
uint32 Scope, // 1 = function local, 2 = file local, 4 = public, 8 = weak public, 0x10 = communal, 0x20 = external
uint32 OldIndex, // Unique identifier used in relocation entries. Value must be > 0 and limited because an array is created with this as index.
// A value will be assigned and returned if 0.
const char * Name, // Name of symbol. Zero-terminated ASCII string. A name will be assigned if 0.
const char * DLLName = 0); // Name of DLL if imported dynamically
void AddRelocation( // Define relocation or cross-reference for disassembler
int32 Section, // Section of relocation source:
// Sections (and groups) are numbered in the order they are defined, starting at 1
// 0 = none or external, -1 = absolute symbol
// -16 = Offset contains image-relative address
uint32 Offset, // Offset of relocation source into section
int32 Addend, // Addend to add to target address,
// including distance from source to instruction pointer in self-relative addresses,
// not including inline addend.
uint32 Type, // see above at SARelocation for definition of relocation types
uint32 Size, // 1 = byte, 2 = word, 4 = dword, 8 = qword
uint32 TargetIndex, // Symbol index of target
uint32 ReferenceIndex = 0); // Symbol index of reference point if Type 0x10, Segment index if Type = 8 or 0x200
int32 AddSectionGroup( // Define section group (from OMF file)
const char * Name, // Name of group
int32 MemberSegment); // Group member. Repeat for multiple members. 0 if none.
static void CountInstructions(); // Count total number of instructions defined in opcodes.cpp
const char * CommentSeparator; // "; " or "# " Start of comment string
const char * HereOperator; // "$" or "." indicating current position
CTextFileBuffer OutFile; // Output file
protected:
CSymbolTable Symbols; // Table of symbols
CSList<SASection> Sections; // List of sections. First is 0
CSList<SARelocation> Relocations; // List of cross references. First is 0
CMemoryBuffer NameBuffer; // String buffer for names of sections. First is 0.
CSList<SFunctionRecord> FunctionList; // List of functions
int64 ImageBase; // Image base for executable files
uint32 ExeType; // File type: 0 = object, 1 = position independent shared object, 2 = executable
uint32 RelocationsInSource; // Number of relocations in source file
// Code parser: The following members are used for parsing
// an opcode and identifying its components
uint8 * Buffer; // Point to start of binary data
SOpcodeProp s; // Properties of current opcode
SATracer t; // Trace of register contents
uint32 Pass; // 1 = pass 1, 2-3 = pass 1 repeated, 0x10 = pass 2, 0x100 = repetition requested
uint32 SectionEnd; // End of current section
uint32 WordSize; // Segment word size: 16, 32, 64
uint32 Section; // Current section/segment
uint32 SectionAddress; // Address of beginning of this section
uint32 SectionType; // 0 = unknown, 1 = code, 2 = data, 3 = uninitialized data, 4 = constant data
uint32 CodeMode; // 1 if current position contains code, 2 if dubiuos, 4 if data
uint32 IFunction; // Index into FunctionList
uint32 FunctionEnd; // End address of current function (pass 2)
uint32 LabelBegin; // Address of nearest preceding label
uint32 LabelEnd; // Address of next label
uint32 LabelInaccessible; // Address of inaccessible code
uint32 IBegin; // Begin of current instruction
uint32 IEnd; // End of current instruction
uint32 DataType; // Type of current data
uint32 DataSize; // Size of current data
uint32 FlagPrevious; // 1: previous instruction was a NOP.
// 2: previous instruction was unconditional jump. 6: instruction was ud2
// 0x100: previous data aligned by 16
// 0x200: previous data aligned by 32
uint8 InstructionSetMax; // Highest instruction set encountered
uint8 InstructionSetAMDMAX; // Highest AMD-specific instruction set encountered
uint16 InstructionSetOR; // Bitwise OR of all instruction sets encountered
uint16 Opcodei; // Map number and index in opcodes.cpp
uint16 OpcodeOptions; // Option flags for opcode
uint16 PreviousOpcodei; // Opcode for previous instruction
uint16 PreviousOpcodeOptions; // Option flags for previous instruction
uint32 CountErrors; // Number of errors since last label
uint32 Syntax; // Assembly syntax dialect: 1: MASM/TASM, 2: NASM/YASM, 4: GAS
uint32 MasmOptions; // Options needed for MASM: 1: dotname, 2: fs used, 4: gs used
// 0x100: 16 bit segments, 0x200: 32 bit segments, 0x400: 64 bit segments
uint32 NamesChanged; // Symbol names containing invalid characters changed
int32 Assumes[6]; // Assumed value of segment register es, cs, ss, ds, fs, gs. See CDisassembler::WriteSectionName for values
void Pass1(); // Pass 1: Find symbols types and unnamed symbols
void Pass2(); // Pass 2: Write output file
int NextFunction2(); // Loop through function blocks in pass 2. Return 0 if finished
int NextLabel(); // Loop through labels. (Pass 2)
int NextInstruction1(); // Go to next instruction. Return 0 if none. (Pass 1)
int NextInstruction2(); // Go to next instruction. Return 0 if none. (Pass 2)
void ParseInstruction(); // Parse one opcode
void ScanPrefixes(); // Scan prefixes
void StorePrefix(uint32 Category, uint8 Byte);// Store prefix according to category
void FindMapEntry(); // Find entry in opcode maps
void FindOperands(); // Interpret mod/reg/rm and SIB bytes and find operand fields
void FindOperandTypes(); // Determine the types of each operand
void FindBroadcast(); // Find broadcast and offset multiplier for EVEX code
void SwizTableLookup(); // Find swizzle table entry for MVEX code
void FindLabels(); // Find any labels at current position and next
void CheckForMisplacedLabel(); // Remove any label placed inside function
void FindRelocations(); // Find any relocation sources in this instruction
void FindWarnings(); // Find any reasons for warnings in code
void FindErrors(); // Find any errors in code
void FindInstructionSet(); // Update instruction set
void CheckForNops(); // Check if warnings are caused by multi-byte NOP
void UpdateSymbols(); // Find unnamed symbols, determine symbol types, update symbol list, call CheckJumpTarget if jump/call
void UpdateTracer(); // Trace register values
void MarkCodeAsDubious(); // Remember that this may be data in a code segment
void CheckRelocationTarget(uint32 IRel, uint32 TargetType, uint32 TargetSize);// Update relocation record and its target
void CheckJumpTarget(uint32 symi); // Extend range of current function to jump target, if needed
void FollowJumpTable(uint32 symi, uint32 RelType);// Check jump/call table and its targets
uint32 MakeMissingRelocation(int32 Section, uint32 Offset, uint32 RelType, uint32 TargetType, uint32 TargetScope, uint32 SourceSize = 0, uint32 RefPoint = 0); // Make a relocation and its target symbol from inline address
void CheckImportSymbol(uint32 symi); // Check for indirect jump to import table entry
void CheckForFunctionBegin(); // Check if function begins at current position
void CheckForFunctionEnd(); // Check if function ends at current position
void CheckLabel(); // Check if a label is needed before instruction
void InitialErrorCheck(); // Check for illegal relocations table entries
void FinalErrorCheck(); // Check for illegal entries in symbol table and relocations table
void CheckNamesValid(); // Fix invalid characters in symbol and section names
void FixRelocationTargetAddresses(); // Find missing relocation target addresses
int TranslateAbsAddress(int64 Addr, int32 &Sect, uint32 &Offset); // Translate absolute virtual address to section and offset
void WriteFileBegin(); // Write begin of file
void WriteFileBeginMASM(); // Write MASM-specific file init
void WriteFileBeginYASM(); // Write YASM-specific file init
void WriteFileBeginGASM(); // Write GAS-specific file init
void WriteFileEnd(); // Write end of file
void WriteSegmentBegin(); // Write begin of segment
void WriteSegmentBeginMASM(); // Write begin of segment, MASM syntax
void WriteSegmentBeginYASM(); // Write begin of segment, YASM syntax
void WriteSegmentBeginGASM(); // Write begin of segment, GAS syntax
void WriteSegmentEnd(); // Write end of segment
void WritePublicsAndExternalsMASM(); // Write public and external symbol definitions, MASM syntax
void WritePublicsAndExternalsYASMGASM(); // Write public and external symbol definitions, YASM and GAS syntax
void WriteFunctionBegin(); // Write begin of function
void WriteFunctionBeginMASM(uint32 symi, uint32 scope);// Write begin of function, MASM syntax
void WriteFunctionBeginYASM(uint32 symi, uint32 scope);// Write begin of function, YASM syntax
void WriteFunctionBeginGASM(uint32 symi, uint32 scope);// Write begin of function, GAS syntax
void WriteFunctionEnd(); // Write end of function
void WriteFunctionEndMASM(uint32 symi); // Write end of function, MASM syntax
void WriteFunctionEndYASM(uint32 symi); // Write end of function, YASM syntax
void WriteFunctionEndGASM(uint32 symi); // Write end of function, GAS syntax
void WriteCodeLabel(uint32 symi); // Write private or public code label
void WriteCodeLabelMASM(uint32 symi, uint32 scope);// Write private or public code label, MASM syntax
void WriteCodeLabelYASM(uint32 symi, uint32 scope);// Write private or public code label, MASM syntax
void WriteCodeLabelGASM(uint32 symi, uint32 scope);// Write private or public code label, MASM syntax
int WriteFillers(); // Check if code is a series of NOPs or other fillers. If so then write it as such
void WriteAlign(uint32 a); // Write alignment directive
void WriteErrorsAndWarnings(); // Write errors and warnings, if any
void WriteAssume(); // Write assume directive for segment register
void WriteInstruction(); // Write instruction and operands
void WriteCodeComment(); // Write hex listing of instruction as comment after instruction
void WriteStringInstruction(); // Write string instruction or xlat instruction
void WriteShortRegOperand(uint32 Type); // Write register operand from lower 3 bits of opcode byte to OutFile
void WriteRegOperand(uint32 Type); // Write register operand from reg bits to OutFile
void WriteRMOperand(uint32 Type); // Write memory or register operand from mod/rm bits of mod/reg/rm byte and possibly SIB byte to OutFile
void WriteDREXOperand(uint32 Type); // Write register operand from dest bits of DREX byte
void WriteVEXOperand(uint32 Type, int i); // Write register operand from VEX.vvvv bits or immediate bits
void WriteOperandAttributeEVEX(int i, int isMem);// Write operand attributes and instruction attributes from EVEX z, LL, b and aaa bits
void WriteOperandAttributeMVEX(int i, int isMem);// Write operand attributes and instruction attributes from MVEX sss, e and kkk bits
void WriteImmediateOperand(uint32 Type); // Write immediate operand or direct jump/call address
void WriteOtherOperand(uint32 Type); // Write other type of operand
void WriteRegisterName(uint32 Value, uint32 Type); // Write name of register to OutFile
void WriteSectionName(int32 SegIndex); // Write section name from section index
void WriteSymbolName(uint32 symi); // Write symbol name
void WriteRelocationTarget(uint32 irel, uint32 Context, int64 Addend);// Write cross reference
void WriteOperandType(uint32 type); // Write type override before operand, e.g. "dword ptr"
void WriteOperandTypeMASM(uint32 type); // Write type override before operand, e.g. "dword ptr", MASM syntax
void WriteOperandTypeYASM(uint32 type); // Write type override before operand, e.g. "dword", YASM syntax
void WriteOperandTypeGASM(uint32 type); // Write type override before operand, e.g. "dword ptr", GAS syntax
void WriteDataItems(); // Write data items
void WriteDataLabelMASM(const char * name, uint32 sym, int line); // Write label before data item, MASM syntax
void WriteDataLabelYASM(const char * name, uint32 sym, int line); // Write label before data item, YASM syntax
void WriteDataLabelGASM(const char * name, uint32 sym, int line); // Write label before data item, GAS syntax
void WriteUninitDataItemsMASM(uint32 size, uint32 count);// Write uninitialized (BSS) data, MASM syntax
void WriteUninitDataItemsYASM(uint32 size, uint32 count);// Write uninitialized (BSS) data, YASM syntax
void WriteUninitDataItemsGASM(uint32 size, uint32 count);// Write uninitialized (BSS) data, GAS syntax
void WriteDataDirectiveMASM(uint32 size); // Write DB, etc., MASM syntax
void WriteDataDirectiveYASM(uint32 size); // Write DB, etc., MASM syntax
void WriteDataDirectiveGASM(uint32 size); // Write DB, etc., MASM syntax
void WriteDataComment(uint32 ElementSize, uint32 LinePos, uint32 Pos, uint32 irel);// Write comment after data item
uint32 GetDataItemSize(uint32 Type); // Get size of data item with specified type
uint32 GetDataElementSize(uint32 Type); // Get size of vector element in data item with specified type
int32 GetSegmentRegisterFromPrefix(); // Translate segment prefix to segment register
template <class TX> TX & Get(uint32 Offset) { // Get object of arbitrary type from buffer
return *(TX*)(Buffer + Offset);}
};
// Declare tables in opcodes.cpp:
extern SOpcodeDef OpcodeMap0[256]; // First opcode map
extern uint32 OpcodeStartPageVEX[]; // Entries to opcode maps, indexed by VEX.mmmm bits
extern SOpcodeDef const * OpcodeStartPageXOP[]; // Entries to opcode maps, indexed by XOP.mmmm bits
extern const uint32 NumOpcodeStartPageVEX; // Number of entries in OpcodeStartPage
extern const uint32 NumOpcodeStartPageXOP; // Number of entries in OpcodeStartPageXOP
extern const SOpcodeDef * const OpcodeTables[]; // Pointers to all opcode tables
extern const uint32 OpcodeTableLength[]; // Size of each table pointed to by OpcodeTables[]
extern const uint32 NumOpcodeTables1, NumOpcodeTables2;// Number of entries in OpcodeTables[] and OpcodeTableLength[]
extern const char * RegisterNames8[8]; // Names of 8 bit registers
extern const char * RegisterNames8x[16]; // Names of 8 bit registers with REX prefix
extern const char * RegisterNames16[16]; // Names of 16 bit registers
extern const char * RegisterNames32[16]; // Names of 32 bit registers
extern const char * RegisterNames64[16]; // Names of 64 bit registers
extern const char * RegisterNamesSeg[8]; // Names of segment registers
extern const char * RegisterNamesCR[16]; // Names of control registers
extern SwizSpec const * SwizTables[][2]; // Pointers to swizzle tables
extern SwizSpec const * SwizRoundTables[][2]; // Pointers to swizzle round tables
extern const char * EVEXRoundingNames[5]; // Tables of rounding mode names for EVEX
// Define constants for special section/segment/group values
#define ASM_SEGMENT_UNKNOWN 0 // Unknown segment for external symbols
#define ASM_SEGMENT_ABSOLUTE -1 // No segment for absolute public symbols
#define ASM_SEGMENT_FLAT -2 // Flat segment group for non-segmented code
#define ASM_SEGMENT_NOTHING -3 // Segment register assumed to nothing by assume directive
#define ASM_SEGMENT_ERROR -4 // Segment register assumed to error (don't use) by assume directive
#define ASM_SEGMENT_IMGREL -16 // Offset is relative to image base or file base,
// ..leave it to the disassembler to find which section contains this address.
// Values > 0 are indices into the Sections buffer representing a named section, segment or group
#endif // #ifndef DISASM_H