kolibrios-fun/kernel/branches/net/drivers/RTL8029.asm

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;                                                                 ;;
;; Copyright (C) KolibriOS team 2004-2010. All rights reserved.    ;;
;; Distributed under terms of the GNU General Public License       ;;
;;                                                                 ;;
;;  RTL8029/ne2000 driver for KolibriOS                            ;;
;;                                                                 ;;
;;  based on RTL8029.asm driver for menuetos                       ;;
;;  and realtek8029.asm for SolarOS by Eugen Brasoveanu            ;;
;;                                                                 ;;
;;    Written by hidnplayr@kolibrios.org                           ;;
;;     with help from CleverMouse                                  ;;
;;                                                                 ;;
;;          GNU GENERAL PUBLIC LICENSE                             ;;
;;             Version 2, June 1991                                ;;
;;                                                                 ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

format MS COFF

        API_VERSION             =   0x01000100
        DRIVER_VERSION          =   5

        MAX_DEVICES             =   16

        DEBUG                   =   1
        __DEBUG__               =   1
        __DEBUG_LEVEL__         =   1

include 'proc32.inc'
include 'imports.inc'
include 'fdo.inc'
include 'netdrv.inc'

virtual at ebx

        device:

        ETH_DEVICE

        .io_addr          dd ?
        .irq_line         db ?
        .pci_bus          db ?
        .pci_dev          db ?

        .flags            db ?
        .vendor           db ?
        .asic_base        dw ?
        .memsize          db ?
        .rx_start         db ?
        .tx_start         db ?
        .bmem             dd ?
        .rmem             dd ?
        .romdata          rb 16

        .size = $ - device

end virtual


public START
public service_proc
public version

        P0_PSTART                 =   0x01
        P0_PSTOP                  =   0x02
        P0_BOUND                  =   0x03
        P0_TSR                    =   0x04
        P0_TPSR                   =   0x04
        P0_TBCR0                  =   0x05
        P0_TBCR1                  =   0x06
        P0_ISR                    =   0x07
        P0_RSAR0                  =   0x08
        P0_RSAR1                  =   0x09
        P0_RBCR0                  =   0x0A
        P0_RBCR1                  =   0x0B
        P0_RSR                    =   0x0C
        P0_RCR                    =   0x0C
        P0_TCR                    =   0x0D
        P0_DCR                    =   0x0E
        P0_IMR                    =   0x0F

        P1_PAR0                   =   0x01
        P1_PAR1                   =   0x02
        P1_PAR2                   =   0x03
        P1_PAR3                   =   0x04
        P1_PAR4                   =   0x05
        P1_PAR5                   =   0x06
        P1_CURR                   =   0x07
        P1_MAR0                   =   0x08

        CMD_PS0                   =   0x00        ;  Page 0 select
        CMD_PS1                   =   0x40        ;  Page 1 select
        CMD_PS2                   =   0x80        ;  Page 2 select
        CMD_RD2                   =   0x20        ;  Remote DMA control
        CMD_RD1                   =   0x10
        CMD_RD0                   =   0x08
        CMD_TXP                   =   0x04        ;  transmit packet
        CMD_STA                   =   0x02        ;  start
        CMD_STP                   =   0x01        ;  stop

        RCR_MON                   =   0x20        ;  monitor mode

        DCR_FT1                   =   0x40
        DCR_LS                    =   0x08        ;  Loopback select
        DCR_WTS                   =   0x01        ;  Word transfer select

        ISR_PRX                   =   0x01        ;  successful recv
        ISR_PTX                   =   0x02        ;  successful xmit
        ISR_RXE                   =   0x04        ;  receive error
        ISR_TXE                   =   0x08        ;  transmit error
        ISR_OVW                   =   0x10        ;  Overflow
        ISR_CNT                   =   0x20        ;  Counter overflow
        ISR_RDC                   =   0x40        ;  Remote DMA complete
        ISR_RST                   =   0x80        ;  reset

        IRQ_MASK                  =   ISR_PRX ; + ISR_PTX + ISR_TXE

        RSTAT_PRX                 =   0x01        ;  successful recv
        RSTAT_CRC                 =   0x02        ;  CRC error
        RSTAT_FAE                 =   0x04        ;  Frame alignment error
        RSTAT_OVER                =   0x08        ;  FIFO overrun

        TXBUF_SIZE                =   6
        RXBUF_END                 =   32
        PAGE_SIZE                 =   256

        ETH_ALEN                  =   6
        ETH_HLEN                  =   14
        ETH_ZLEN                  =   60
        ETH_FRAME_LEN             =   1514

        FLAG_PIO                  =   0x01
        FLAG_16BIT                =   0x02
        ASIC_PIO                  =   0

        VENDOR_NONE               =   0
        VENDOR_WD                 =   1
        VENDOR_NOVELL             =   2
        VENDOR_3COM               =   3

        NE_ASIC_OFFSET            =   0x10
        NE_RESET                  =   0x0F        ; Used to reset card
        NE_DATA                   =   0x00        ; Used to read/write NIC mem

        MEM_8192                  =   32
        MEM_16384                 =   64
        MEM_32768                 =   128

        ISA_MAX_ADDR              =   0x400



section '.flat' code readable align 16

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; proc START
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

align 4
proc START stdcall, state:dword

        cmp     [state], 1
        jne     .exit
  .entry:
        DEBUGF 2,"Registering rtl8029 service \n"
        stdcall RegService, my_service, service_proc
        ret
  .fail:
  .exit:
        xor     eax, eax
        ret

endp


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; proc SERVICE_PROC
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

align 4
proc service_proc stdcall, ioctl:dword

        mov     edx, [ioctl]
        mov     eax, [IOCTL.io_code]

;------------------------------------------------------
                       ;---------------
        cmp     eax, 0 ;SRV_GETVERSION
        jne     @F     ;---------------

        cmp     [IOCTL.out_size], 4
        jl      .fail
        mov     eax, [IOCTL.output]
        mov     [eax], dword API_VERSION

        xor     eax, eax
        ret

;------------------------------------------------------
  @@:                  ;---------
        cmp     eax, 1 ;SRV_HOOK
        jne     @F     ;---------

        DEBUGF  2,"Checking if device is already listed..\n"

        mov     eax, [IOCTL.input]

        cmp     [IOCTL.inp_size], 3
        jl      .fail
        cmp     byte [eax], 1
        je      .pci

        cmp     [IOCTL.inp_size], 4
        jl      .fail
        cmp     byte [eax], 0
        je      .isa

        jmp     .fail

  .pci:

; check if the device is already listed

        mov     esi, device_list
        mov     ecx, [devices]
        test    ecx, ecx
        jz      .firstdevice_pci

        mov     ax , [eax+1]                            ; get the pci bus and device numbers
  .nextdevice:
        mov     ebx, [esi]
        cmp     ax , word [device.pci_bus]              ; compare with pci and device num in device list (notice the usage of word instead of byte)
        je      .find_devicenum                         ; Device is already loaded, let's find it's device number
        add     esi, 4
        loop    .nextdevice

  .firstdevice_pci:
        call    create_new_struct

        mov     eax, [IOCTL.input]
        mov     cl , [eax+1]
        mov     [device.pci_bus], cl
        mov     cl , [eax+2]
        mov     [device.pci_dev], cl

; Now, it's time to find the base io addres of the PCI device

        find_io [device.pci_bus], [device.pci_dev], [device.io_addr]

; We've found the io address, find IRQ now

        find_irq [device.pci_bus], [device.pci_dev], [device.irq_line]

        jmp     .hook

  .isa:

        mov     esi, device_list
        mov     ecx, [devices]
        test    ecx, ecx
        jz      .firstdevice_isa
        mov     al , [eax+3]
        movzx   edi, word [eax+1]
  .nextdevice_isa:
        mov     ebx, [esi]
        cmp     edi, [device.io_addr]
        jne     .maybenext
        cmp     al , [device.irq_line]
        je      find_device_num
  .maybenext:
        add     esi, 4
        loop    .nextdevice_isa



  .firstdevice_isa:
        call    create_new_struct

        mov     eax, [IOCTL.input]
        movzx   ecx , word [eax+1]
        mov     [device.io_addr], ecx
        mov     cl, [eax+3]
        mov     [device.irq_line], cl

  .hook:

        DEBUGF  2,"Hooking into device, dev:%x, bus:%x, irq:%x, addr:%x\n",\
        [device.pci_dev]:1,[device.pci_bus]:1,[device.irq_line]:1,[device.io_addr]:4

        call    probe                                                   ; this function will output in eax
        test    eax, eax
        jnz     .err                                                    ; If an error occured, exit

        mov     eax, [devices]
        mov     [device_list+4*eax], ebx
        inc     [devices]

        mov     [device.type], NET_TYPE_ETH
        call    NetRegDev

        cmp     eax, -1
        jz      .err
        ret


; If the device was already loaded, find the device number and return it in eax

  .find_devicenum:
        DEBUGF  1,"Trying to find device number of already registered device\n"
        call    NetPtrToNum                                             ; This kernel procedure converts a pointer to device struct in ebx
                                                                        ; into a device number in edi
        mov     eax, edi                                                ; Application wants it in eax instead
        DEBUGF  1,"Kernel says: %u\n", eax
        ret

  .err:
        DEBUGF  1,"Failed, removing device structure\n"
        stdcall KernelFree, ebx

        jmp     .fail

;------------------------------------------------------
  @@:
.fail:
        or      eax, -1
        ret

;------------------------------------------------------
endp


create_new_struct:

        cmp     [devices], MAX_DEVICES
        jge     .fail

        allocate_and_clear ebx, device.size, .fail      ; Allocate the buffer for device structure

        mov     [device.reset], reset
        mov     [device.transmit], transmit
        mov     [device.get_MAC], read_mac
        mov     [device.set_MAC], write_mac
        mov     [device.unload], unload
        mov     [device.name], my_service

        ret

  .fail:
        add     esp, 4          ; return to caller of 'hook'
        or      eax, -1
        ret

find_device_num:

        DEBUGF  1,"Trying to find device number of already registered device\n"
        mov     ebx, eax
        call    NetPtrToNum                                             ; This kernel procedure converts a pointer to device struct in ebx
                                                                        ; into a device number in edi
        mov     eax, edi                                                ; Application wants it in eax instead
        DEBUGF  1,"Kernel says: %u\n", eax
        ret


;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;;
;;                                                                        ;;
;;        Actual Hardware dependent code starts here                      ;;
;;                                                                        ;;
;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;;


unload:   ; TODO
        or      eax, -1
        ret



;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;;  probe: enables the device and clears the rx buffer
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

probe:
        mov     [device.vendor], VENDOR_NONE
        mov     [device.bmem], 0
        mov     eax,[device.io_addr]
        add     eax, NE_ASIC_OFFSET
        mov     [device.asic_base], ax

        DEBUGF  2,"Trying 16-bit mode\n"

        or      [device.flags], FLAG_16BIT or FLAG_PIO
        mov     [device.memsize], MEM_32768
        mov     [device.tx_start], 64
        mov     [device.rx_start], TXBUF_SIZE + 64

        set_io  0
        set_io  P0_DCR
        mov     al, DCR_WTS + DCR_FT1 + DCR_LS
        out     dx, al

        set_io  P0_PSTART
        mov     al, MEM_16384
        out     dx, al

        set_io  P0_PSTOP
        mov     al, MEM_32768
        out     dx, al

        mov     esi, test_data
        mov     di, 16384
        mov     cx, 14
        call    eth_pio_write

        mov     si, 16384
        mov     cx, 14
        lea     edi, [device.romdata]
        call    eth_pio_read

        lea     esi, [device.romdata]
        mov     edi, test_data
        mov     ecx, 13

     repz    cmpsb
     jz      ep_set_vendor


        DEBUGF  2,"Trying 8-bit mode\n"

        mov     [device.flags], FLAG_PIO
        mov     [device.memsize], MEM_16384
        mov     [device.tx_start], 32
        mov     [device.rx_start], TXBUF_SIZE + 32

        mov     dx, [device.asic_base]
        add     dx, NE_RESET

        in      al, dx
        out     dx, al

        in      al, 0x84

        set_io  0
        mov     al, CMD_RD2 + CMD_STP
        out     dx, al

        set_io  P0_RCR
        mov     al, RCR_MON
        out     dx, al

        set_io  P0_DCR
        mov     al, DCR_FT1 + DCR_LS
        out     dx, al

        set_io  P0_PSTART
        mov     al, MEM_8192
        out     dx, al

        set_io  P0_PSTOP
        mov     al, MEM_16384
        out     dx, al

        mov     esi, test_data
        mov     di, 8192
        mov     cx, 14
        call    eth_pio_write

        mov     si, 8192
        mov     cx, 14
        lea     edi, [device.romdata]
        call    eth_pio_read

        mov     esi, test_data
        lea     edi, [device.romdata]
        mov     ecx, 13

    repz      cmpsb
    jz        ep_set_vendor

        DEBUGF  2,"This is not a valid ne2000 device!\n"
        or      eax, -1
        ret


ep_set_vendor:

        cmp     [device.io_addr], ISA_MAX_ADDR
        jbe     ep_001

        DEBUGF  2,"Card is using PCI bus\n"

;        or      [flags], FLAG_16BIT

ep_001:
        mov     [device.vendor], VENDOR_NOVELL

ep_check_have_vendor:


        mov     al, [device.vendor]
        cmp     al, VENDOR_NONE
;        je      rtl8029_exit

        cmp     al, VENDOR_3COM
        je      reset

        mov     eax, [device.bmem]
        mov     [device.rmem], eax

        call    read_mac

        push    .hack
        sub     esp, 6
        mov     edi, esp
        lea     esi, [device.mac]
        movsd
        movsw
        jmp     write_mac
       .hack:


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;;   reset: Place the chip into a virgin state
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

reset:
        DEBUGF  2,"Resetting device\n"

; attach int handler
        movzx   eax, [device.irq_line]
        DEBUGF  1,"Attaching int handler to irq %x\n",eax:1
        stdcall AttachIntHandler, eax, int_handler, dword 0

; Stop mode

        set_io  0
        mov     al, CMD_PS0 + CMD_RD2 + CMD_STP
        out     dx, al

        set_io  P0_DCR
        test    [device.flags], FLAG_16BIT
        jz      nsr_001

        mov     al, 0x49
        jmp     nsr_002

nsr_001:
        mov     al, 0x48

nsr_002:
        out     dx, al

; clear remote bytes count
        set_io  0

        xor     al, al

        set_io  P0_RBCR0
        out     dx, al

        set_io  P0_RBCR1
        out     dx, al


; initialize Receive configuration register
        set_io  P0_RCR
        mov     al, 0x20        ; monitor mode
        out     dx, al


; transmit configuration register
        set_io  P0_TCR
        mov     al, 2           ; internal loopback
        out     dx, al


; transmit page stuff
        set_io  P0_TPSR
        mov     al, [device.tx_start]
        out     dx, al

; set receive control register ;;;;
        set_io  P0_RCR
        mov     al, 4           ; accept broadcast
        out     dx, al

; pagestart
        set_io  P0_PSTART
        mov     al, [device.rx_start]
        out     dx, al

; pagestop
        set_io  P0_PSTOP
        mov     al, [device.memsize]
        out     dx, al

; page boundary
        set_io  P0_BOUND
        mov     al, [device.memsize]
        dec     al
        out     dx, al


;;clear IRQ mask
;        set_io  P0_IMR
;        xor     al, al
;        out     dx, al

        set_io  0
        mov     al, CMD_PS1 + CMD_RD2 + CMD_STP ; page 1, stop mode
        out     dx, al

        set_io  P1_CURR
        mov     al, [device.rx_start]
        out     dx, al

        set_io  0
        mov     al, CMD_PS0 + CMD_RD2 + CMD_STA ; go to page 0
        out     dx, al

; Read MAC address
        call    read_mac

; clear interupt status
        set_io  0
        set_io  P0_ISR
        mov     al, 0xff
        out     dx, al

; set IRQ mask
        set_io  P0_IMR
        mov     al, IRQ_MASK
        out     dx, al

;; start mode
;        set_io  0
;        mov     al, CMD_STA
;        out     dx, al

; clear transmit control register
        set_io  P0_TCR
        mov     al, 0           ; no loopback
        out     dx, al

; clear packet/byte counters
        xor     eax, eax
        lea     edi, [device.bytes_tx]
        mov     ecx, 6
        rep     stosd

; Set the mtu, kernel will be able to send now
        mov     [device.mtu], 1514

; Indicate that we have successfully reset the card
        xor     eax, eax
        DEBUGF  2,"Done!\n"

        ret



;***************************************************************************
;   Function
;      transmit
; buffer in [esp+4], size in [esp+8], pointer to device struct in ebx
;***************************************************************************

align 4
transmit:

        mov     esi, [esp + 4]
        mov     ecx, [esp + 8]
        DEBUGF  2,"Transmitting packet, buffer:%x, size:%u\n",esi, ecx
        DEBUGF  2,"To: %x-%x-%x-%x-%x-%x From: %x-%x-%x-%x-%x-%x Type:%x%x\n",[esi+0]:2,[esi+1]:2,[esi+2]:2,[esi+3]:2,[esi+4]:2,[esi+5]:2,[esi+6]:2,[esi+7]:2,[esi+8]:2,[esi+9]:2,[esi+10]:2,[esi+11]:2,[esi+13]:2,[esi+12]:2

        cmp     ecx, ETH_FRAME_LEN
        jg      .err ; packet is too long
        cmp     ecx, 60
        jl      .err ; packet is too short

        movzx   edi, [device.tx_start]
        shl     edi, 8
        push    cx
        call    eth_pio_write
        pop     cx

        set_io  0
        mov     al, CMD_PS0 + CMD_RD2 + CMD_STA
        out     dx, al

        set_io  P0_TPSR
        mov     al, [device.tx_start]
        out     dx, al

        set_io  P0_TBCR0
        mov     al, cl
        out     dx, al

        set_io  P0_TBCR1
        mov     al, ch
        out     dx, al

        set_io  0
        mov     al, CMD_PS0 + CMD_TXP + CMD_RD2 + CMD_STA
        out     dx, al

        DEBUGF  2," - Packet Sent!\n"

        inc     [device.packets_tx]
        mov     eax, [esp + 8]                   ; Get packet size in eax

        add     dword [device.bytes_tx], eax
        adc     dword [device.bytes_tx + 4], 0

        stdcall KernelFree, [esp+4]
        xor     eax, eax
        ret     8

.err:
        or      eax, -1
        stdcall KernelFree, [esp+4]
        ret     8



;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; Interrupt handler
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

align 4
int_handler:

        DEBUGF  1,"\n%s int\n", my_service

; find pointer of device wich made INT occur

        mov     ecx, [devices]
        test    ecx, ecx
        jz      .nothing
        mov     esi, device_list
  .nextdevice:
        mov     ebx, [esi]

        set_io  0
        set_io  P0_ISR
        in      al, dx
        test    al, al
        jnz     .got_it
  .continue:
        add     esi, 4
        dec     ecx
        jnz     .nextdevice
  .nothing:
        ret

  .got_it:

        DEBUGF  1,"Device: %x Status: %x ", ebx, eax:2

        test    al, ISR_PRX    ; packet received ok ?
        jz      .no_rx

; looks like we've found a device wich received a packet..

        stdcall KernelAlloc, ETH_FRAME_LEN  ; size doesnt really matter as packet size is smaller then kernel's page size
        test    eax, eax
        jz      .fail_2

;--------------------------------------
; allocate memory for temp variables in stack

        sub     esp, 14+8

        eth_type        equ esp
        pkthdr          equ esp + 2
        pktoff          equ esp + 6
        eth_rx_data_ptr equ esp + 8
        eth_tmp_len     equ esp + 12

; These will be used by eth_receiver when the packet gets there

        pointer         equ esp + 14
        size            equ esp + 18

;-------------------------------------

        mov     [pointer], eax
        mov     [eth_rx_data_ptr], eax

        set_io  P0_BOUND
        in      al, dx
        inc     al

        cmp     al, [device.memsize]
        jb      .nsp_001

        mov     al, [device.rx_start]

.nsp_001:
        mov     ch, al

        set_io  0
        mov     al, CMD_PS1
        out     dx, al

        set_io  P1_CURR
        in      al, dx               ; get current page
        mov     cl, al

        set_io  0
        mov     al, CMD_PS0
        out     dx, al

        cmp     cl, [device.memsize]
        jb      .nsp_002

        mov     cl, [device.rx_start]

.nsp_002:
        cmp     cl, ch
        je      .fail

        xor     ax, ax
        mov     ah, ch

        mov     [pktoff], ax

        mov     al, [device.flags]
        test    al, FLAG_PIO
        jz      .nsp_003

        mov     si, word [pktoff]
        lea     edi, [pkthdr]
        mov     cx, 4
        call    eth_pio_read
        jmp     .nsp_004

.nsp_003:
        mov     edi, [device.rmem]
        movzx   eax, word [pktoff]
        add     edi, eax
        mov     eax, [edi]
        mov     [pkthdr], eax

.nsp_004:
        add     word[pktoff] , 4

        xor     eax, eax
        mov     ax , [pkthdr + 2]
        sub     ax , 4

        DEBUGF  2,"Received %u bytes\n",eax

        add     dword [device.bytes_rx], eax  ; Update stats
        adc     dword [device.bytes_rx + 4], 0
        inc     dword [device.packets_rx]     ;

        mov     [eth_tmp_len], ax
        mov     dword[size], eax

        cmp     ax, ETH_ZLEN
        jb      .fail

        cmp     ax , ETH_FRAME_LEN
        ja      .fail

        mov     al , [pkthdr]
        test    al , RSTAT_PRX
        jz      .fail

   ; Right, we can now get the data

        movzx   esi, [device.memsize]
        sub     si , [pktoff]

        cmp     [eth_tmp_len], si
        jbe     .nsp_005

        DEBUGF  2,"WRAP!\n"

        mov     al , [device.flags]
        test    al , FLAG_PIO
        jz      .nsp_006

        push    esi
        mov     cx , si
        mov     si , [pktoff+4]
        mov     edi, [eth_rx_data_ptr+4]
        call    eth_pio_read
        pop     esi
        jmp     .nsp_007

.nsp_006:
        DEBUGF  2,"PIO mode not supported by HW!\n"
   ; Not implemented, as we are using PIO mode on this card

.nsp_007:
        xor     al, al
        mov     ah, [device.rx_start]
        mov     [pktoff], ax

        add     [eth_rx_data_ptr], esi
        sub     [eth_tmp_len], si

.nsp_005:
        test    [device.flags], FLAG_PIO
        jz      .nsp_008

        movzx   esi, word [pktoff]
        movzx   ecx, word [eth_tmp_len]
        mov     edi, [eth_rx_data_ptr]
        call    eth_pio_read
        jmp     .nsp_009

.nsp_008:
        DEBUGF  2,"PIO mode not supported by HW!\n"
   ; Not implemented, as we are using PIO mode on this card

.nsp_009:
        mov     al, [pkthdr+1]
        cmp     al, [device.rx_start]
        jne     .nsp_010

        mov     al, [device.memsize]

.nsp_010:
        set_io  0
        set_io  P0_BOUND
        dec     al
        out     dx, al

        add     esp, 14
        jmp     Eth_input

.fail:
        add     esp, 14+8
.fail_2:
        DEBUGF  2,"done\n"

  .no_rx:

        ret





;;;;;;;;;;;;;;;;;;;;;;;
;;                   ;;
;; Write MAC address ;;
;;                   ;;
;;;;;;;;;;;;;;;;;;;;;;;

align 4
write_mac:      ; in: mac on stack (6 bytes)

        DEBUGF  1,"Writing MAC: "

        set_io  0
        mov     al, CMD_PS1; + CMD_RD2 + CMD_STP
        out     dx, al

        set_io  P1_PAR0
        mov     esi, esp
        mov     cx, 6
 @@:
        lodsb
        out     dx, al
        inc     dx
        loopw   @r

        add     esp, 6

; Notice this procedure does not ret, but continues to read_mac instead.

;;;;;;;;;;;;;;;;;;;;;;
;;                  ;;
;; Read MAC address ;;
;;                  ;;
;;;;;;;;;;;;;;;;;;;;;;

read_mac:

        DEBUGF  1,"Reading MAC: "

;        set_io  0
;        mov     al, CMD_PS1; + CMD_RD2 + CMD_STP ; select page 1
;        out     dx, al
;
;        set_io  P1_PAR0
;        lea     edi, [mac]
;
;        mov     cx, 6
; .loop:
;        in      al, dx
;        stosb
;        inc     dx
;        loopw   .loop
;
;        set_io  0
;        mov     al, CMD_PS0; + CMD_RD2 + CMD_STA  ; set page back to 0
;        out     dx, al

        mov     si, 0
        mov     cx, 16
        lea     edi, [device.romdata]
        call    eth_pio_read

        lea     esi, [device.romdata]
        lea     edi, [device.mac]
        mov     ecx, 6

  .loop:
        movsb
        test    [device.flags], FLAG_16BIT
        jz      .8bit
        inc     esi
  .8bit:
        loop    .loop

        DEBUGF  1,"%x-%x-%x-%x-%x-%x\n",[edi-6]:2,[edi-5]:2,[edi-4]:2,[edi-3]:2,[edi-2]:2,[edi-1]:2

        ret


;***************************************************************************
;   Function
;      eth_pio_read
;
;   Description
;       Read a frame from the ethernet card via Programmed I/O
;      src in si
;      cnt in cx
;       dst in edi
;***************************************************************************
eth_pio_read:

        DEBUGF  1,"Eth PIO Read from %x to %x, %u bytes ",si,edi,cx

        set_io  0
        mov     al, CMD_RD2 + CMD_STA
        out     dx, al

        mov     al, cl
        set_io  P0_RBCR0
        out     dx, al

        mov     al, ch
        set_io  P0_RBCR1
        out     dx, al

        mov     ax, si
        set_io  P0_RSAR0
        out     dx, al
        shr     ax, 8
        set_io  P0_RSAR1
        out     dx, al

        mov     al, CMD_RD0 + CMD_STA
        set_io  0
        out     dx, al

        mov     dx, [device.asic_base]

        test    [device.flags], FLAG_16BIT
        jz      epr_003

        DEBUGF  1,"in 16-bits mode"

        shr     cx, 1   ; note that if the number was odd, carry flag will be set
        pushf           ; save the flags for later

epr_002:
        in      ax, dx
        stosw
        loopw   epr_002

        inc     cx
        popf
        jnc     epr_004

epr_003:
        in      al, dx
        stosb
        loopw   epr_003


epr_004:
        set_io  0
        set_io  P0_ISR

epr_005:                                ; Wait for Remote DMA Complete
        in      al, dx
        test    al, ISR_RDC
        jz      epr_005
;        and     al, not ISR_RDC
        out     dx, al                  ; clear the bit


        DEBUGF  1,"\n"
        ret




;***************************************************************************
;   Function
;      eth_pio_write
;
;   Description
;       writes a frame to the ethernet card via Programmed I/O
;      dst in di
;      cnt in cx
;       src in esi
;***************************************************************************
eth_pio_write:

        DEBUGF  1,"Eth PIO Write from %x to %x, %u bytes ",esi,di,cx

        set_io  0
        mov     al, CMD_RD2 + CMD_STA
        out     dx, al

        set_io  P0_ISR
        mov     al, ISR_RDC
        out     dx, al

        set_io  P0_RBCR0
        mov     al, cl
        out     dx, al

        set_io  P0_RBCR1
        mov     al, ch
        out     dx, al

        mov     ax, di
        set_io  P0_RSAR0
        out     dx, al
        shr     ax, 8
        set_io  P0_RSAR1
        out     dx, al

        set_io  0
        mov     al, CMD_RD1 + CMD_STA
        out     dx, al

        mov     dx, [device.asic_base]
        test    [device.flags], FLAG_16BIT
        jz      epw_003

        DEBUGF  1,"in 16-bits mode"

        shr     cx, 1   ; note that if the number was odd, carry flag will be set
        pushf           ; save the flags for later

epw_002:
        lodsw
        out     dx, ax
        loopw   epw_002

        popf
        jnc     epw_004
        inc     cx

epw_003:
        lodsb
        out     dx, al
        loopw   epw_003

epw_004:
        set_io  0
        set_io  P0_ISR

epw_005:                                ; Wait for Remote DMA Complete
        in      al, dx
        test    al, ISR_RDC
        jz      epw_005
;        and     al, not ISR_RDC
        out     dx, al                  ; clear the bit


        DEBUGF  1,"\n"
        ret



;all initialized data place here
align 4

devices         dd 0
version         dd (DRIVER_VERSION shl 16) or (API_VERSION and 0xFFFF)
my_service      db 'RTL8029/ne2000',0  ;max 16 chars include zero

device_1        db 'Realtek 8029',0
device_2        db 'Realtek 8019',0
device_3        db 'Realtek 8019AS',0
device_4        db 'ne2000',0
device_5        db 'DP8390',0

test_data       db 'NE*000 memory',0

include_debug_strings

section '.data' data readable writable align 16  ;place all uninitialized data place here

device_list     rd MAX_DEVICES