1
1

Added CardBUS driver stub.

git-svn-id: svn://kolibrios.org@4476 a494cfbc-eb01-0410-851d-a64ba20cac60
This commit is contained in:
hidnplayr 2014-01-18 12:03:05 +00:00
parent d80753697c
commit 1408a74c1d

319
drivers/bus/cardbus.asm Normal file
View File

@ -0,0 +1,319 @@
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2004-2014. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;; PCMCIA aka cardbus driver for KolibriOS ;;
;; Written by hidnplayr@gmail.com ;;
;; ;;
;; Many credits go to Paolo Franchetti for his HWTEST program ;;
;; (https://sites.google.com/site/pfranz73/) from which large ;;
;; parts of code have been borrowed. ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; This module detects and initialises all Cardbus/pc-card/PCMCIA cards.
; WARNING: Cards must be inserted before the driver starts, and shouldn't be removed.
; This module doesn't handle insertions and removals.
format MS COFF
API_VERSION = 0x01000100
DRIVER_VERSION = 5
CARDBUS_IO = 0xFC00
DEBUG = 1
__DEBUG__ = 1
__DEBUG_LEVEL__ = 1
include '../struct.inc'
include '../macros.inc'
include '../proc32.inc'
include '../imports.inc'
include '../pci.inc'
include '../fdo.inc'
public START
public service_proc
public version
section '.flat' code readable align 16
;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; proc START ;;
;; ;;
;; (standard driver proc) ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;
align 4
proc START stdcall, state:dword
cmp [state], 1
jne .exit
.entry:
DEBUGF 1, "Loading cardbus driver\n"
stdcall RegService, my_service, service_proc
call detect
ret
.fail:
.exit:
xor eax, eax
ret
endp
;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; proc SERVICE_PROC ;;
;; ;;
;; (standard driver proc) ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;
align 4
proc service_proc stdcall, ioctl:dword
mov edx, [ioctl]
mov eax, [edx + IOCTL.io_code]
;------------------------------------------------------
cmp eax, 0 ;SRV_GETVERSION
jne .fail
cmp [edx + IOCTL.out_size], 4
jb .fail
mov eax, [edx + IOCTL.output]
mov [eax], dword API_VERSION
xor eax, eax
ret
.fail:
or eax, -1
ret
endp
align 4
proc detect
locals
last_bus dd ?
card_bus dd ?
bus dd ?
devfn dd ?
endl
DEBUGF 1, "Searching for cardbus bridges...\n"
xor eax, eax
mov [bus], eax
inc eax
call PciApi
cmp eax, -1
je .err
mov [last_bus], eax
inc eax
mov [card_bus], eax
.next_bus:
and [devfn], 0
.next_dev:
stdcall PciRead32, [bus], [devfn], PCI_VENDOR_ID
test eax, eax
jz .next
cmp eax, -1
je .next
stdcall PciRead16, [bus], [devfn], 0x0a ; class & subclass
cmp ax, 0x0607
je .found
.next:
inc [devfn]
cmp [devfn], 256
jb .next_dev
mov eax, [bus]
inc eax
mov [bus], eax
cmp eax, [last_bus]
jna .next_bus
DEBUGF 1, "Search complete\n"
xor eax, eax
inc eax
ret
.found:
DEBUGF 1, "Found cardbus bridge: bus=0x%x, dev=0x%x\n", [bus], [devfn]
stdcall PciRead8, [bus], [devfn], 0x0e ; get header type
DEBUGF 1, "Header type=0x%x\n", eax:2
test al, al
jz .next
; Write PCI and cardbus numbers
stdcall PciRead32, [bus], [devfn], 0x18 ; PCcard latency settings + Card bus number, PCI bus number
and eax, 0xff000000 ; Keep original latency setting, clear the rest
mov al, byte[bus]
mov ah, byte[card_bus]
mov ebx, [card_bus]
shl ebx, 16
or eax, ebx
DEBUGF 1, "Latency, bus,.. 0x%x\n", eax
stdcall PciWrite32, [bus], [devfn], 0x18, eax
; set ExCA legacy mode base
stdcall PciWrite32, [bus], [devfn], 0x44, 1
; Enable power
stdcall PciRead8, [bus], [devfn], 0x14 ; get capabilities offset
movzx eax, al ; (A0 for TI bridges)
DEBUGF 1, "Capabilities offset=0x%x\n", eax:2
add al, 4 ; Power management control/status
stdcall PciWrite16, [bus], [devfn], eax, 0x0100 ; Enable PME signaling, power state=D0
; Enable Bus master, io space, memory space
stdcall PciWrite16, [bus], [devfn], PCI_REG_COMMAND, 0x0007
; Write CardBus Socket/ExCA base address
mov eax, 0x7f000000
push eax
stdcall PciWrite32, [bus], [devfn], 0x10, eax ; base is 4 Kbyte aligned
pop ebx
stdcall MapIoMem, ebx, 4096, 0x1b
mov ecx, eax
; Check if a card is present in the socket
mov eax, [ecx + 8] ; Socket present state register
DEBUGF 1, "Socket present state reg: 0x%x\n", eax
and al, 10110110b ; NotACard | CBCard | 16bitCard | CDetect1 | CDetect2
cmp al, 00100000b ; Check for inserted cardbus card
je .CardbusInserted
; No card found... set PCI command back to 0
stdcall PciWrite16, [bus], [devfn], PCI_REG_COMMAND, 0 ; To avoid conflicts with other sockets
DEBUGF 1, "Cardbus KO\n"
jmp .next
.CardbusInserted:
DEBUGF 1, "Card inserted\n"
;mov word[ecx + 0x802], 0x00F9 ; Assert reset, output enable, vcc=vpp=3.3V
mov dword[ecx + 0x10], 0x33 ; Request 3.3V for Vcc and Vpp (Control register)
;push ecx
;mov esi, 10
;call Sleep
;pop ecx
;mov byte[ecx + 0x803], 0x40 ; stop reset
mov dword[ecx + 0xC], 0x4000 ; force Card CV test (Force register) ;;; WHY???
DEBUGF 1, "Resetting card\n"
; Next power up test can be deferred until before writing to Bridge control PCI reg 0x3E
.waitpower: ; For TI, you can check that bits 8-11 in PCI reg 80h are all 0
test dword[ecx + 8], 1 shl 3 ; Test PWRCYCLE bit
jz .waitpower ; Wait for power to go up
DEBUGF 1, "Interface is powered up\n"
; Write MemBase-Limit 0 and 1, then IOBase-Limit 0 and 1
; mem0 space limit = base => size is 4 kilobytes
; set to 0 the second interval (mem1 and IO1)
; IO0: size is 256 bytes
irp regvalue, 0x7efff000, 0x7effffff, 0x7effe000, 0x7effe000, CARDBUS_IO, CARDBUS_IO + 0xFF, 0, 0
{
common
reg = 0x1C
forward
stdcall PciWrite32, [bus], [devfn], reg, regvalue
DEBUGF 1, "Writing 0x%x to 0x%x\n", regvalue, reg
reg = reg + 4
}
stdcall PciWrite8, [bus], [devfn], 0x3c, 0xc ; IRQ line
stdcall PciRead16, [bus], [devfn], 0x3e ; Bridge control
or ax, 0x0700 ; Enable write posting, both memory windows prefetchable
stdcall PciWrite16, [bus], [devfn], 0x3e, eax
DEBUGF 1, "Write posting enabled\n"
DEBUGF 1, "Bridge PCI registers:\n"
rept 17 reg
{
stdcall PciRead32, [bus], [devfn], 4*(reg-1)
DEBUGF 1, "0x%x\n", eax
}
inc byte[0x80009021] ; LAST PCI bus count in kernel (dirty HACK!)
mov ecx, 100
.waitactive:
push ecx
stdcall PciRead32, [card_bus], 0, PCI_VENDOR_ID ; Check if the card is awake yet
inc eax
jnz .got_it
mov esi, 2
call Sleep
pop ecx
dec ecx
jnz .waitactive
DEBUGF 1, "Timeout!\n"
; TODO: disable card/bridge again ?
jmp .next
.got_it:
pop eax
DEBUGF 1, "Card is enabled!\n"
stdcall PciWrite32, [card_bus], 0, PCI_BASE_ADDRESS_0, CARDBUS_IO ; Supposing it's IO space that is needed
stdcall PciWrite8, [card_bus], 0, PCI_REG_IRQ, 0xC ; FIXME
stdcall PciWrite16, [card_bus], 0, PCI_REG_COMMAND, PCI_BIT_PIO or PCI_BIT_MMIO
DEBUGF 1, "done\n"
jmp .next
.err:
DEBUGF 1, "Error\n"
xor eax, eax
ret
endp
; End of code
section '.data' data readable writable align 16
version dd (DRIVER_VERSION shl 16) or (API_VERSION and 0xFFFF)
my_service db 'CARDBUS',0 ; max 16 chars include zero
include_debug_strings ; All data wich FDO uses will be included here