;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; ;; Copyright (C) KolibriOS team 2004-2009. All rights reserved. ;; ;; Distributed under terms of the GNU General Public License ;; ;; ;; ;; IP.INC ;; ;; ;; ;; Part of the tcp/ip network stack for KolibriOS ;; ;; ;; ;; Based on the work of [Johnny_B] and [smb] ;; ;; ;; ;; Written by hidnplayr@kolibrios.org ;; ;; ;; ;; GNU GENERAL PUBLIC LICENSE ;; ;; Version 2, June 1991 ;; ;; ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; $Revision: 922 $ ; IP underlying protocols numbers ETHER_IPv4 equ 0x0008 ; Reversed from 0800 for intel MAX_FRAGMENTS equ 16 MAX_IP equ MAX_NET_DEVICES struct IPv4_Packet .VersionAndIHL db ? ; Version[0-3 bits] and IHL(header length)[4-7 bits] .TypeOfService db ? .TotalLength dw ? .Identification dw ? .FlagsAndFragmentOffset dw ? ; Flags[0-2] and FragmentOffset[3-15] .TimeToLive db ? ; .Protocol db ? .HeaderChecksum dw ? .SourceAddress dd ? .DestinationAddress dd ? .DataOrOptional: ends struct FRAGMENT_slot .ttl dw ? ; Time to live for this entry, 0 for empty slot's .id dw ? ; Identification field from IP header .SrcIP dd ? ; .. from IP header .DstIP dd ? ; .. from IP header .ptr dd ? ; Pointer to first packet .size: ends struct FRAGMENT_entry ; This structure will replace the ethernet header in fragmented ip packets .PrevPtr dd ? ; Pointer to previous fragment entry (-1 for first packet) .NextPtr dd ? ; Pointer to next fragment entry (-1 for last packet) .Owner dd ? ; Pointer to structure of driver rb 2 ; to match ethernet header size .Data: ; Ip header begins here (we will need the IP header to re-construct the complete packet) ends align 4 uglobal BROADCAST dd ? IP_LIST rd MAX_IP SUBNET_LIST rd MAX_IP DNS_LIST rd MAX_IP GATEWAY_LIST rd MAX_IP IP_PACKETS_TX rd MAX_IP IP_PACKETS_RX rd MAX_IP FRAGMENT_LIST rb MAX_FRAGMENTS*FRAGMENT_slot.size endg ;----------------------------------------------------------------- ; ; IPv4_init ; ; This function resets all IP variables ; ; IN: / ; OUT: / ; ;----------------------------------------------------------------- align 4 IPv4_init: or eax, -1 mov edi, BROADCAST stosd xor eax, eax mov ecx, 4*MAX_IP rep stosd xor eax, eax mov edi, FRAGMENT_LIST mov ecx, FRAGMENT_slot.size*MAX_FRAGMENTS/4 + 2*MAX_IP rep stosd ret ;----------------------------------------------------------------- ; ; IP_Handler: ; ; Called by eth_handler, ; will check if IP Packet isnt damaged ; and call appropriate handler. (TCP/UDP/ICMP/..) ; ; It will also re-construct fragmented packets ; ; IN: Pointer to buffer in [esp] ; size of buffer in [esp+4] ; pointer to device struct in ebx ; pointer to IP Packet data in edx ; OUT: / ; ;----------------------------------------------------------------- align 4 IPv4_handler: DEBUGF 1,"IP_Handler - start\n" mov cx , [edx + IPv4_Packet.HeaderChecksum] xchg ch , cl ; Get the checksum in intel format mov word [edx + IPv4_Packet.HeaderChecksum], 0 ; Clear checksum field to recalculating checksum movzx eax, byte [edx + IPv4_Packet.VersionAndIHL] ; Calculate Header length by using IHL field and eax, 0x0000000F ; shl eax, 2 ; push edx stdcall checksum_jb, edx, eax ; buf_ptr, buf_size pop edx cmp cx , ax jnz .dump ; if CHECKSUM isn't valid then dump Packet mov eax, [edx + IPv4_Packet.DestinationAddress] mov edi, BROADCAST mov ecx, MAX_IP+1 repnz scasd jz .ip_ok not eax test eax, 127 shl 24 ; 127.x.x.x jz .ip_ok ; TODO: we need to check for broadcasts (other then 255.255.255.255) jmp .dump .ip_ok: call ETH_struc2dev ; TODO: make this work on other protocols too! inc [IP_PACKETS_RX+4*edi] DEBUGF 1,"IP_Handler - packet from %u.%u.%u.%u\n",\ [edx + IPv4_Packet.SourceAddress]:1,[edx + IPv4_Packet.SourceAddress + 1]:1,[edx + IPv4_Packet.SourceAddress + 2]:1,[edx + IPv4_Packet.SourceAddress + 3]:1 mov al , [edx + IPv4_Packet.VersionAndIHL] and al , 0x0f ; get IHL(header length) cmp al , 0x05 ; IHL!= 5*4(20 bytes) jnz .dump ; TODO: dont dump packets wich have optional fiels !!! /!\ cmp byte [edx + IPv4_Packet.TimeToLive], 0 je .dump movzx eax, word [edx + IPv4_Packet.FlagsAndFragmentOffset] xchg al , ah test ax , 1 shl 13 ; Is 'more fragments' flag set ? jnz .yes_fragments ; If so, we definately have a fragmented packet test ax , 0x1fff ; If flag is not set, but there is a fragment offset, the packet is last in series of fragmented packets jnz .last_fragment .handle_it: ; We reach here if packet hasnt been fragmented, or when it already has been re-constructed movzx eax, byte [edx + IPv4_Packet.VersionAndIHL] ; Calculate Header length by using IHL field and eax, 0x0000000F ; shl eax, 2 ; movzx ecx, word [edx + IPv4_Packet.TotalLength] ; Calculate length of encapsulated Packet xchg cl , ch ; sub ecx, eax ; add eax, edx push eax mov al , [edx + IPv4_Packet.Protocol] pop edx ; Offset to data (tcp/udp/icmp/.. Packet) cmp al , IP_PROTO_TCP ; je TCP_handler cmp al , IP_PROTO_UDP je UDP_handler cmp al , IP_PROTO_ICMP je ICMP_handler DEBUGF 1,"IP_Handler - unknown protocol:%u\n",al .dump: DEBUGF 1,"IP_Handler - done\n" ; inc [dumped_rx_count] call kernel_free add esp, 4 ; pop (balance stack) ret .yes_fragments: shl ax , 3 DEBUGF 1,"Fragmented packet, offset:%u, id:%x\n", ax, [edx + IPv4_Packet.Identification]:4 test ax , ax ; Is this the first packet of the fragment? jnz .not_first_fragment DEBUGF 1,"First fragmented packet received!\n" ; try to locate a free slot.. mov ecx, MAX_FRAGMENTS mov esi, FRAGMENT_LIST .find_free_slot: cmp word [esi + FRAGMENT_slot.ttl], 0 je .found_free_slot add esi, FRAGMENT_slot.size loop .find_free_slot jmp .dump ; If no free slot was found, dump the packet .found_free_slot: ; We found a free slot, let's fill in the FRAGMENT_slot structure mov word [esi + FRAGMENT_slot.ttl], 15 ; RFC recommends 15 secs as ttl mov ax , word [edx + IPv4_Packet.Identification] mov word [esi + FRAGMENT_slot.id], ax mov eax, dword [edx + IPv4_Packet.SourceAddress] mov dword [esi + FRAGMENT_slot.SrcIP], eax mov eax, dword [edx + IPv4_Packet.DestinationAddress] mov dword [esi + FRAGMENT_slot.DstIP], eax pop eax mov dword [esi + FRAGMENT_slot.ptr], eax ; Now, replace ethernet header in original buffer with a FRAGMENT_entry structure mov [eax + FRAGMENT_entry.NextPtr], -1 mov [eax + FRAGMENT_entry.PrevPtr], -1 mov [eax + FRAGMENT_entry.Owner], ebx add esp, 4 ; balance stack and exit ret .not_first_fragment: DEBUGF 1,"Middle fragmented packet received!\n" call .find_fragment_slot cmp esi, -1 je .dump mov word [esi + FRAGMENT_slot.ttl], 15 ; Reset the ttl mov esi, [esi + FRAGMENT_slot.ptr] or edi, -1 .find_last_entry: ; The following routine will try to find the last entry cmp edi, [esi + FRAGMENT_entry.PrevPtr] jne .destroy_slot ; Damn, something screwed up, remove the whole slot (and free buffers too if possible!) mov edi, esi mov esi, [esi + FRAGMENT_entry.NextPtr] cmp esi, -1 jne .find_last_entry ; We found the last entry (pointer is noww in edi) ; We are going to overwrite the ethernet header in received packet with a FRAGMENT_entry structure pop eax ; pointer to packet mov [edi + FRAGMENT_entry.NextPtr], eax ; update pointer of previous entry to the new entry mov [eax + FRAGMENT_entry.NextPtr], -1 mov [eax + FRAGMENT_entry.PrevPtr], edi mov [eax + FRAGMENT_entry.Owner], ebx add esp, 4 ret .last_fragment: DEBUGF 1,"Last fragmented packet received!\n" call .find_fragment_slot cmp esi, -1 je .dump mov esi, [esi + FRAGMENT_slot.ptr] ; We found the first entry, let's calculate total size of the packet in eax, so we can allocate a buffer push esi xor eax, eax ; or edi, -1 .count_bytes: cmp [esi + FRAGMENT_entry.PrevPtr], edi jne .destroy_slot_pop ; Damn, something screwed up, remove the whole slot (and free buffers too if possible!) mov cx, word [esi + FRAGMENT_entry.Data + IPv4_Packet.TotalLength] ; Add total length xchg cl, ch DEBUGF 1,"Packet size: %u\n", cx add ax, cx movzx cx, byte [esi + FRAGMENT_entry.Data + IPv4_Packet.VersionAndIHL] ; Sub Header length and cx, 0x000F shl cx, 2 DEBUGF 1,"Header size: %u\n", cx sub ax, cx mov edi, esi mov esi, [esi + FRAGMENT_entry.NextPtr] cmp esi, -1 jne .count_bytes mov esi, [esp+4] ;;; mov [edi + FRAGMENT_entry.NextPtr], esi ; Add this packet to the chain, this simplifies the following code mov [esi + FRAGMENT_entry.NextPtr], -1 mov [esi + FRAGMENT_entry.PrevPtr], edi mov [esi + FRAGMENT_entry.Owner], ebx mov cx, [edx + IPv4_Packet.TotalLength] ; Note: This time we dont substract Header length xchg cl , ch DEBUGF 1,"Packet size: %u\n", cx add ax , cx DEBUGF 1,"Total Received data size: %u\n", eax push eax mov ax , [edx + IPv4_Packet.FlagsAndFragmentOffset] xchg al , ah shl ax , 3 add cx , ax pop eax DEBUGF 1,"Total Fragment size: %u\n", ecx cmp ax, cx jne .destroy_slot_pop push eax push eax call kernel_alloc test eax, eax je .destroy_slot_pop ; If we dont have enough space to allocate the buffer, discard all packets in slot mov edx, [esp+4] ; Get pointer to first fragment entry back in edx .rebuild_packet_loop: movzx ecx, word [edx + FRAGMENT_entry.Data + IPv4_Packet.FlagsAndFragmentOffset] ; Calculate the fragment offset xchg cl , ch ; intel byte order shl cx , 3 ; multiply by 8 and clear first 3 bits DEBUGF 1,"Fragment offset: %u\n", cx lea edi, [eax + ecx] ; Notice that edi will be equal to eax for first fragment movzx ebx, byte [edx + FRAGMENT_entry.Data + IPv4_Packet.VersionAndIHL] ; Find header size (in ebx) of fragment and bx , 0x000F ; shl bx , 2 ; lea esi, [edx + FRAGMENT_entry.Data] ; Set esi to the correct begin of fragment movzx ecx, word [edx + FRAGMENT_entry.Data + IPv4_Packet.TotalLength] ; Calculate total length of fragment xchg cl, ch ; intel byte order cmp edi, eax ; Is this packet the first fragment ? je .first_fragment sub cx, bx ; If not, dont copy the header add esi, ebx ; .first_fragment: push cx ; First copy dword-wise, then byte-wise shr cx, 2 ; rep movsd ; pop cx ; and cx, 3 ; rep movsb ; push eax push edx ; Push pointer to fragment onto stack mov edx, [edx + FRAGMENT_entry.NextPtr] ; Set edx to the next pointer call kernel_free ; free the previous fragment buffer (this uses the value from stack) pop eax cmp edx, -1 ; Check if it is last fragment in chain jne .rebuild_packet_loop pop ecx ; xchg cl, ch mov edx, eax mov word [edx + IPv4_Packet.TotalLength], cx add esp, 8 xchg cl, ch ; This prints the IP packet to the debug board (usefull when using serial output debug..) push ecx ;;;; push eax ;;;; ; mov esi, edx ; ; ; ; @@: ; ; lodsb ; ; DEBUGF 1,"%x ", eax:2 ; ; loop @r ; movzx eax, byte [edx + IPv4_Packet.VersionAndIHL] ; Calculate Header length by using IHL field and ax, 0x000F ; shl ax, 2 ; sub ecx, eax ; add eax, edx push eax mov al , [edx + IPv4_Packet.Protocol] pop edx ; Offset to data (tcp/udp/icmp/.. Packet) cmp al , IP_PROTO_TCP ; je TCP_handler cmp al , IP_PROTO_UDP je UDP_handler cmp al , IP_PROTO_ICMP je ICMP_handler_fragments DEBUGF 1,"IP_Handler - unknown protocol:%u\n",al call kernel_free add esp, 8 ; pop (balance stack) ret .destroy_slot_pop: add esp, 4 .destroy_slot: DEBUGF 1,"Destroy fragment slot!\n" ; TODO! jmp .dump ;----------------------------------------------------------------- ; ; find fragment slot ; ; IN: pointer to fragmented packet in edx ; TODO: the RFC says we should check protocol too ; OUT: pointer to slot in edi, -1 on error ; ;----------------------------------------------------------------- .find_fragment_slot: push eax ebx ecx edx mov ax , word [edx + IPv4_Packet.Identification] mov ecx, MAX_FRAGMENTS mov esi, FRAGMENT_LIST mov ebx, dword [edx + IPv4_Packet.SourceAddress] mov edx, dword [edx + IPv4_Packet.DestinationAddress] .find_slot: cmp word [esi + FRAGMENT_slot.id], ax jne .try_next cmp dword [esi + FRAGMENT_slot.SrcIP], ebx jne .try_next cmp dword [esi + FRAGMENT_slot.DstIP], edx je .found_slot .try_next: add esi, FRAGMENT_slot.size loop .find_slot ; pop edx ebx or esi, -1 ; ret .found_slot: pop edx ecx ebx eax ret ;----------------------------------------------------------------- ; ; Decrease TimeToLive of all fragment slots ; ; IN: / ; OUT: / ; ;----------------------------------------------------------------- align 4 IPv4_decrease_fragment_ttls: mov esi, FRAGMENT_LIST mov ecx, MAX_FRAGMENTS .loop: cmp [esi + FRAGMENT_slot.ttl], 0 je .try_next dec [esi + FRAGMENT_slot.ttl] jnz .try_next DEBUGF 1,"Fragment slot timed-out!\n" ; TODO: clear all entry's of timed-out slot .try_next: add esi, 4 loop .loop ret ;----------------------------------------------------------------- ; ; Create_IPv4_Packet ; ; IN: eax = dest ip ; ebx = source ip ; ecx = data length ; dx = fragment id ; di = protocol ; ; OUT: eax points to buffer start ; ebx is size of complete buffer ; edi = pointer to start of data (-1 on error) ; ecx = unchanged (packet size of embedded data) ; edx = pointer to device struct (needed for sending procedure) ; esi = pointer to sending procedure ; ;----------------------------------------------------------------- ;;; TODO: create fragmented packets align 4 IPv4_create_packet: DEBUGF 1,"Create IPv4 Packet\n" cmp ecx, 1514 jg .exit_ cmp eax, -1 je .broadcast ; If it is broadcast, just send call ARP_IP_to_MAC cmp eax, -1 jne .found DEBUGF 1,"Create IPv4 Packet - ARP entry not found!\n" ; TODO: QUEUE! or edi, -1 ret .found: push ax push ebx jmp .send .broadcast: push word -1 push dword -1 .send: push ecx eax ebx dx di call IPv4_dest_to_dev inc [IP_PACKETS_TX+4*edi] mov edi, [ETH_DRV_LIST + 4*edi] lea eax, [edi + ETH_DEVICE.mac] lea ebx, [esp+16] mov ecx, [esp+12] add ecx, IPv4_Packet.DataOrOptional mov edx, edi ;;; mov di , ETHER_IPv4 call ETH_create_Packet ; TODO: figure out a way to make this work with other protocols too cmp edi, -1 je .exit mov [edi + IPv4_Packet.VersionAndIHL], 0x45 ; IPv4, normal length (no Optional header) mov [edi + IPv4_Packet.TypeOfService], 0 xchg ch, cl mov [edi + IPv4_Packet.TotalLength], cx mov [edi + IPv4_Packet.FlagsAndFragmentOffset], 0x0000 mov [edi + IPv4_Packet.TimeToLive], 128 mov [edi + IPv4_Packet.HeaderChecksum], 0 pop cx mov [edi + IPv4_Packet.Protocol], cl pop cx mov [edi + IPv4_Packet.Identification], cx pop ecx mov [edi + IPv4_Packet.SourceAddress], ecx pop ecx mov [edi + IPv4_Packet.DestinationAddress], ecx push eax stdcall checksum_jb, edi, IPv4_Packet.DataOrOptional ; buf_ptr, buf_size xchg al, ah mov [edi + IPv4_Packet.HeaderChecksum], ax pop eax ecx add edi, IPv4_Packet.DataOrOptional DEBUGF 1,"IPv4 Packet for device %x created successfully\n", edx add esp, 6 ret .exit: add esp, 16+6 .exit_: DEBUGF 1,"Create IPv4 Packet - failed\n" or edi, -1 ret ;--------------------------------------------------------------------------- ; ; IPv4_dest_to_dev ; ; IN: Destination IP in eax ; OUT: device id in edi ; ;--------------------------------------------------------------------------- align 4 IPv4_dest_to_dev: DEBUGF 1,"IPv4 destination to device: " xor edi, edi mov ecx, MAX_IP .loop: mov ebx, [IP_LIST+edi] ; we dont need to worry about non exisiting ip interfaces and ebx, [SUBNET_LIST+edi] ; they have IP and SUBNET set to all one's, so they will have no match except 255.255.255.255 ; (only a moron would insert that ip into this function..) mov edx, eax and edx, [SUBNET_LIST+edi] cmp ebx, edx je .found_it add edi, 4 loop .loop xor edi, edi ; if none found, use device 0 as default device .found_it: shr edi, 2 DEBUGF 1,"%u\n",edi ret ;--------------------------------------------------------------------------- ; ; IPv4_get_frgmnt_num ; ; IN: / ; OUT: fragment number in ax ; ;--------------------------------------------------------------------------- align 4 IPv4_get_frgmnt_num: xor ax, ax ;;; TODO: replace this with real code ret ;--------------------------------------------------------------------------- ; ; IPv4_API ; ; This function is called by system function 75 ; ; IN: subfunction number in bl ; device number in bh ; ecx, edx, .. depends on subfunction ; ; OUT: ; ;--------------------------------------------------------------------------- align 4 IPv4_API: movzx eax, bh shl eax, 2 test bl, bl jz .packets_tx ; 0 dec bl jz .packets_rx ; 1 dec bl jz .read_ip ; 2 dec bl jz .write_ip ; 3 dec bl jz .read_dns ; 4 dec bl jz .write_dns ; 5 dec bl jz .read_subnet ; 6 dec bl jz .write_subnet ; 7 dec bl jz .read_gateway ; 8 dec bl jz .write_gateway ; 9 .error: mov eax, -1 ret .packets_tx: add eax, IP_PACKETS_TX mov eax, [eax] ret .packets_rx: add eax, IP_PACKETS_RX mov eax, [eax] ret .read_ip: add eax, IP_LIST mov eax, [eax] ret .write_ip: add eax, IP_LIST mov [eax], ecx xor eax, eax ret .read_dns: add eax, DNS_LIST mov eax, [eax] ret .write_dns: add eax, DNS_LIST mov [eax], ecx xor eax, eax ret .read_subnet: add eax, SUBNET_LIST mov eax, [eax] ret .write_subnet: add eax, SUBNET_LIST mov [eax], ecx xor eax, eax ret .read_gateway: add eax, GATEWAY_LIST mov eax, [eax] ret .write_gateway: add eax, GATEWAY_LIST mov [eax], ecx xor eax, eax ret