;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; ;; ;; VESA12.INC ;; ;; ;; ;; Vesa 1.2 functions for MenuetOS ;; ;; ;; ;; Copyright 2002 Ville Turjanmaa ;; ;; ;; ;; quickcode@mail.ru - bankswitch for S3 cards ;; ;; ;; ;; See file COPYING for details ;; ;; ;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; A complete video driver should include the following types of function ; ; Putpixel ; Getpixel ; ; Drawimage ; Drawbar ; ; Drawbackground ; ; ; Modifying the set_bank -function is mostly enough ; for different Vesa 1.2 setups. ;!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ; set_bank for Trident videocards, work on Trident 9440 ; modified by Mario79 ;set_bank: ;cli ;cmp al,[0xfff2] ;je retsb ;mov [0xfff2],al ;push dx ;mov dx,3D8h ;out dx,al ;pop dx ;retsb: ;sti ;ret ;!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ; set_bank for S3 videocards, work on S3 ViRGE PCI (325) ; modified by kmeaw set_bank: pushfd cli cmp al,[0xfff2] je retsb mov [0xfff2],al push ax push dx push cx mov cl, al mov dx, 0x3D4 mov al, 0x38 out dx, al ;CR38 Register Lock 1 ;Note: Traditionally 48h is used to ;unlock and 00h to lock inc dx mov al, 0x48 out dx, al ;3d5 -? dec dx mov al, 0x31 out dx, al ;CR31 Memory Configuration Register ;0 Enable Base Address Offset (CPUA BASE). Enables bank operation if set, ;disables if clear. ;4-5 Bit 16-17 of the Display Start Address. For the 801/5,928 see index 51h, ;for the 864/964 see index 69h. inc dx in al, dx dec dx mov ah, al mov al, 0x31 out dx, ax mov al, ah or al, 9 inc dx out dx, al dec dx mov al, 0x35 out dx, al ;CR35 CRT Register Lock inc dx in al, dx dec dx and al, 0xF0 mov ch, cl and ch, 0x0F or ch, al mov al, 0x35 out dx, al inc dx mov al, ch out dx, ax dec dx mov al, 0x51 ;Extended System Control 2 Register out dx, al inc dx in al, dx dec dx and al, 0xF3 shr cl, 2 and cl, 0x0C or cl, al mov al, 0x51 out dx, al inc dx mov al, cl out dx, al dec dx mov al, 0x38 out dx, al inc dx xor al, al out dx, al dec dx pop cx pop dx pop ax retsb: popfd ret ;Set bank function for Intel 810/815 chipsets ; *****Modified by Protopopius, Russia.***** ; ********* http://menuetos.hut.ru ************** ; ************************************************ ; ;set_bank: ;cli ;cmp al,[0xfff2] ;je retsb ;mov [0xfff2],al ;push ax ;push dx ;mov dx,3CEh ;mov ah,al ; Save value for later use ;mov al,10h ; Index GR10 (Address Mapping) ;out dx,al ; Select GR10 ;inc dl ;mov al,3 ; Set bits 0 and 1 (Enable linear page mapping) ;out dx,al ; Write value ;dec dl ;mov al,11h ; Index GR11 (Page Selector) ;out dx,al ; Select GR11 ;inc dl ;mov al,ah ; Write address ;out dx,al ; Write the value ;pop dx ;pop ax ;retsb: ;sti ;ret ;!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!} ;set_bank: ; cli ; cmp al,[0xfff2] ; je retsb ; mov [0xfff2],al ; push ax ; push dx ; mov ah,al ; mov dx,0x03D4 ; mov al,0x39 ; out dx,al ; inc dl ; mov al,0xA5 ; out dx,al ; dec dl ; mov al,6Ah ; out dx,al ; inc dl ; mov al,ah ; out dx,al ; dec dl ; mov al,0x39 ; out dx,al ; inc dl ; mov al,0x5A ; out dx,al ; dec dl ; pop dx ; pop ax ; ; retsb: ; ret vesa12_drawbackground: call [disable_mouse] push eax push ebx push ecx push edx xor edx,edx mov eax,dword[WinMapAddress-8] mov ebx,dword[WinMapAddress-4] mul ebx mov ebx,3 mul ebx mov [imax],eax mov eax,[draw_data+32+RECT.left] mov ebx,[draw_data+32+RECT.top] mov edi,0 ;no force v12dp3: push eax push ebx mov esi,0x300000 cmp [WinMapAddress-12],dword 1 ; tiled background jne no_vesa12_tiled_bgr push edx xor edx,edx mov ecx,[WinMapAddress-8] div ecx mov eax,edx push eax mov eax,ebx xor edx,edx mov ecx,[WinMapAddress-4] div ecx mov ebx,edx pop eax pop edx no_vesa12_tiled_bgr: cmp [WinMapAddress-12],dword 2 ; stretched background jne no_vesa12_stretched_bgr push edx imul eax,dword [WinMapAddress-8] xor edx,edx mov ecx,[0xfe00] inc ecx div ecx push eax mov eax,ebx imul eax,dword [WinMapAddress-4] xor edx,edx mov ecx,[0xfe04] inc ecx div ecx mov ebx,eax pop eax pop edx no_vesa12_stretched_bgr: push eax mov eax,ebx xor edx,edx mov ebx,[WinMapAddress-8] add ebx,[WinMapAddress-8] add ebx,[WinMapAddress-8] mul ebx mov esi,eax pop eax add esi,eax add esi,eax add esi,eax add esi,0x300000 pop ebx pop eax v12di4: mov ecx,[esi] pusha mov esi,eax mov edi,ebx mov eax,[0xfe00] add eax,1 mul ebx add eax,esi add eax,WinMapAddress cmp [eax],byte 1 jnz v12nbgp mov eax,[0xfe08] mov ebx,edi mul ebx add eax,esi add eax,esi add eax,esi cmp [0xFBF1],byte 24 jz v12bgl3 add eax,esi v12bgl3: push ebx push eax sub eax,[0xfe80] shr eax,16 call set_bank pop eax and eax,65535 add eax,0xa0000 pop ebx mov [eax],cx add eax,2 shr ecx,16 mov [eax],cl sti v12nbgp: popa add esi,3 inc eax cmp eax,[draw_data+32+RECT.right] jg v12nodp31 jmp v12dp3 v12nodp31: mov eax,[draw_data+32+RECT.left] inc ebx cmp ebx,[draw_data+32+RECT.bottom] jg v12dp4 jmp v12dp3 v12dp4: pop edx pop ecx pop ebx pop eax ret vesa12_drawbar: call [disable_mouse] ;; mov [novesachecksum],dword 0 sub edx,ebx sub ecx,eax push esi push edi push eax push ebx push ecx push edx mov ecx,[0x3010] add eax,[ecx-twdw+WDATA.box.left] add ebx,[ecx-twdw+WDATA.box.top] push eax mov eax,ebx ; y mov ebx,[0xfe08] mul ebx pop ecx add eax,ecx ; x add eax,ecx add eax,ecx cmp [0xfbf1],byte 24 ; 24 or 32 bpp ? - x start jz dbpi2412 add eax,ecx dbpi2412: add eax,[0xfe80] mov edi,eax ; x size mov eax,[esp+4] ; [esp+6] mov ecx,eax add ecx,eax add ecx,eax cmp [0xfbf1],byte 24 ; 24 or 32 bpp ? - x size jz dbpi24312 add ecx,eax dbpi24312: mov ebx,[esp+0] ; check limits ? push eax push ecx mov eax,[0x3010] mov ecx,[eax+draw_data-0x3000+RECT.left] cmp ecx,0 jnz dbcblimitlset12 mov ecx,[eax+draw_data-0x3000+RECT.top] cmp ecx,0 jnz dbcblimitlset12 mov ecx,[eax+draw_data-0x3000+RECT.right] cmp ecx,[0xfe00] jnz dbcblimitlset12 mov ecx,[eax+draw_data-0x3000+RECT.bottom] cmp ecx,[0xfe04] jnz dbcblimitlset12 pop ecx pop eax push dword 0 jmp dbcblimitlno12 dbcblimitlset12: pop ecx pop eax push dword 1 dbcblimitlno12: cmp [0xfbf1],byte 24 ; 24 or 32 bpp ? jz dbpi24bit12 jmp dbpi32bit12 ; DRAWBAR 24 BBP dbpi24bit12: push eax push ebx push edx mov eax,ecx mov ebx,3 div ebx mov ecx,eax pop edx pop ebx pop eax cld dbnewpi12: push ebx push edi push ecx xor edx,edx mov eax,edi sub eax,[0xfe80] mov ebx,3 div ebx add eax,WinMapAddress mov ebx,[0x3000] cld dbnp2412: mov dl,[eax] push eax push ecx cmp dl,bl jnz dbimp24no12 cmp [esp+5*4],dword 0 jz dbimp24yes12 ; call dbcplimit ; jnz dbimp24no12 dbimp24yes12: push edi mov eax,edi sub eax,[0xfe80] shr eax,16 call set_bank and edi,0xffff add edi,0xa0000 mov eax,[esp+8+3*4+16+4+4] stosw shr eax,16 stosb sti pop edi add edi,3 pop ecx pop eax inc eax loop dbnp2412 jmp dbnp24d12 dbimp24no12: pop ecx pop eax cld add edi,3 inc eax loop dbnp2412 dbnp24d12: mov eax,[esp+3*4+16+4] test eax,0x80000000 jz nodbgl2412 cmp al,0 jz nodbgl2412 dec eax mov [esp+3*4+16+4],eax nodbgl2412: pop ecx pop edi pop ebx add edi,[0xfe08] dec ebx jz dbnonewpi12 jmp dbnewpi12 dbnonewpi12: add esp,7*4 ret ; DRAWBAR 32 BBP dbpi32bit12: cld shr ecx,2 dbnewpi3212: push ebx push edi push ecx mov eax,edi sub eax,[0xfe80] shr eax,2 add eax,WinMapAddress mov ebx,[0x3000] cld dbnp3212: mov dl,[eax] push eax push ecx cmp dl,bl jnz dbimp32no12 cmp [esp+5*4],dword 0 jz dbimp32yes12 ; call dbcplimit ; jnz dbimp32no12 dbimp32yes12: push edi mov eax,edi sub eax,[0xfe80] shr eax,16 call set_bank and edi,0xffff add edi,0xa0000 mov eax,[esp+8+3*4+16+4+4] stosw shr eax,16 stosb sti pop edi add edi,4 inc ebp pop ecx pop eax inc eax loop dbnp3212 jmp dbnp32d12 dbimp32no12: pop ecx pop eax inc eax add edi,4 inc ebp loop dbnp3212 dbnp32d12: mov eax,[esp+12+16+4] test eax,0x80000000 jz nodbgl3212 cmp al,0 jz nodbgl3212 dec eax mov [esp+12+16+4],eax nodbgl3212: pop ecx pop edi pop ebx add edi,[0xfe08] dec ebx jz nodbnewpi3212 jmp dbnewpi3212 nodbnewpi3212: add esp,7*4 ret Vesa12_putpixel24: mov edi,eax ; x mov eax,ebx ; y lea edi,[edi+edi*2] mov ebx,[0xfe08] mul ebx add edi,eax mov eax,edi shr eax,16 call set_bank and edi,65535 add edi,0xa0000 mov eax,[esp+28] stosw shr eax,16 mov [edi],al sti ret Vesa12_putpixel32: mov edi,eax ; x mov eax,ebx ; y shl edi,2 mov ebx,[0xfe08] mul ebx add edi,eax mov eax,edi shr eax,16 call set_bank and edi,65535 add edi,0xa0000 mov ecx,[esp+28] mov [edi],ecx sti ret Vesa12_getpixel24: mov edi,eax ; x mov eax,ebx ; y lea edi,[edi+edi*2] mov ebx,[0xfe08] mul ebx add edi,eax mov eax,edi shr eax,16 call set_bank and edi,65535 add edi,0xa0000 mov ecx,[edi] and ecx,255*256*256+255*256+255 sti ret Vesa12_getpixel32: mov edi,eax ; x mov eax,ebx ; y shl edi,2 mov ebx,[0xfe08] xor edx,edx mul ebx add edi,eax mov eax,edi shr eax,16 call set_bank and edi,65535 add edi,0xa0000 mov ecx,[edi] and ecx,255*256*256+255*256+255 sti ret vesa12_putimage: ; ebx = pointer to image ; ecx = size [x|y] ; edx = coordinates [x|y] ; ebp = pointer to 'get' function ; esi = pointer to 'init' function ; edi = parameter for 'get' function ; mov ebx,image ; mov ecx,320*65536+240 ; mov edx,20*65536+20 call [disable_mouse] mov [novesachecksum],dword 0 push esi push edi push eax push ebx push ecx push edx movzx eax,word [esp+2] movzx ebx,word [esp+0] mov ecx,[0x3010] add eax,[ecx-twdw+WDATA.box.left] add ebx,[ecx-twdw+WDATA.box.top] push eax mov eax,ebx ; y mul dword [0xfe08] pop ecx add eax,ecx ; x add eax,ecx add eax,ecx cmp [0xfbf1],byte 24 ; 24 or 32 bpp ? - x start jz pi2412 add eax,ecx pi2412: add eax,[0xfe80] mov edi,eax ; x size movzx ecx,word [esp+6] mov esi,[esp+8] movzx ebx,word [esp+4] ; check limits while draw ? push ecx mov eax,[0x3010] cmp dword [eax+draw_data-0x3000+RECT.left], 0 jnz dbcblimitlset212 cmp dword [eax+draw_data-0x3000+RECT.top], 0 jnz dbcblimitlset212 mov ecx,[eax+draw_data-0x3000+RECT.right] cmp ecx,[0xfe00] jnz dbcblimitlset212 mov ecx,[eax+draw_data-0x3000+RECT.bottom] cmp ecx,[0xfe04] jnz dbcblimitlset212 pop ecx push 0 jmp dbcblimitlno212 dbcblimitlset212: pop ecx push 1 dbcblimitlno212: cmp [0xfbf1],byte 24 ; 24 or 32 bpp ? jnz pi32bit12 pi24bit12: newpi12: push edi push ecx push ebx mov edx,edi sub edx,[0xfe80] mov ebx,3 div ebx add edx,WinMapAddress mov ebx,[0x3000] mov bh,[esp+4*3] np2412: cmp bl,[edx] jnz imp24no12 ; mov eax,[esi] push dword [esp+4*3+20] call ebp ; cmp bh,0 ; jz imp24yes12 ; call dbcplimit ; jnz imp24no12 imp24yes12: push edi push eax mov eax,edi sub eax,[0xfe80] shr eax,16 call set_bank pop eax and edi,0xffff add edi,0xa0000 mov [edi],ax shr eax,16 mov [edi+2],al pop edi imp24no12: inc edx ; add esi,3 add edi,3 dec ecx jnz np2412 np24d12: pop ebx pop ecx pop edi add edi,[0xfe08] dec ebx jnz newpi12 nonewpi12: pop eax edx ecx ebx eax edi esi xor eax, eax ret pi32bit12: newpi3212: push edi push ecx push ebx mov edx,edi sub edx,[0xfe80] shr edx,2 add edx,WinMapAddress mov ebx,[0x3000] mov bh,[esp+4*3] np3212: cmp bl,[edx] jnz imp32no12 ; mov eax,[esi] push dword [esp+4*3+20] call ebp ; cmp bh,0 ; jz imp32yes12 ; call dbcplimit ; jnz imp32no12 imp32yes12: push edi push eax mov eax,edi sub eax,[0xfe80] shr eax,16 call set_bank pop eax and edi,0xffff mov [edi+0xa0000],eax pop edi imp32no12: inc edx ; add esi,3 add edi,4 dec ecx jnz np3212 np32d12: pop ebx pop ecx pop edi add edi,[0xfe08] dec ebx jnz newpi3212 nonewpi3212: pop eax edx ecx ebx eax edi esi xor eax, eax ret vesa12_read_screen_pixel: and eax,0x3FFFFF cmp [0xfbf1],byte 24 ; 24 or 32 bpp ? jz v12rsp24 mov edi,eax shl edi,2 mov eax,edi shr eax,16 call set_bank and edi,65535 add edi,0xa0000 mov eax,[edi] and eax,0x00ffffff ret v12rsp24: imul eax,3 mov edi,eax shr eax,16 call set_bank and edi,65535 add edi,0xa0000 mov eax,[edi] and eax,0x00ffffff ret