kolibrios-fun/contrib/toolchain/avra/includes/tn13def.inc
Serhii Sakhno 7c539d8e19 upload avra
git-svn-id: svn://kolibrios.org@6400 a494cfbc-eb01-0410-851d-a64ba20cac60
2016-04-13 17:05:47 +00:00

469 lines
15 KiB
C++

;***** THIS IS A MACHINE GENERATED FILE - DO NOT EDIT ********************
;***** Created: 2005-01-11 10:31 ******* Source: ATtiny13.xml ************
;*************************************************************************
;* A P P L I C A T I O N N O T E F O R T H E A V R F A M I L Y
;*
;* Number : AVR000
;* File Name : "tn13def.inc"
;* Title : Register/Bit Definitions for the ATtiny13
;* Date : 2005-01-11
;* Version : 2.14
;* Support E-mail : avr@atmel.com
;* Target MCU : ATtiny13
;*
;* DESCRIPTION
;* When including this file in the assembly program file, all I/O register
;* names and I/O register bit names appearing in the data book can be used.
;* In addition, the six registers forming the three data pointers X, Y and
;* Z have been assigned names XL - ZH. Highest RAM address for Internal
;* SRAM is also defined
;*
;* The Register names are represented by their hexadecimal address.
;*
;* The Register Bit names are represented by their bit number (0-7).
;*
;* Please observe the difference in using the bit names with instructions
;* such as "sbr"/"cbr" (set/clear bit in register) and "sbrs"/"sbrc"
;* (skip if bit in register set/cleared). The following example illustrates
;* this:
;*
;* in r16,PORTB ;read PORTB latch
;* sbr r16,(1<<PB6)+(1<<PB5) ;set PB6 and PB5 (use masks, not bit#)
;* out PORTB,r16 ;output to PORTB
;*
;* in r16,TIFR ;read the Timer Interrupt Flag Register
;* sbrc r16,TOV0 ;test the overflow flag (use bit#)
;* rjmp TOV0_is_set ;jump if set
;* ... ;otherwise do something else
;*************************************************************************
#ifndef _TN13DEF_INC_
#define _TN13DEF_INC_
#pragma partinc 0
; ***** SPECIFY DEVICE ***************************************************
.device ATtiny13
#pragma AVRPART ADMIN PART_NAME ATtiny13
.equ SIGNATURE_000 = 0x1e
.equ SIGNATURE_001 = 0x90
.equ SIGNATURE_002 = 0x07
#pragma AVRPART CORE CORE_VERSION V2
#pragma AVRPART CORE NEW_INSTRUCTIONS lpm rd,z+
; ***** I/O REGISTER DEFINITIONS *****************************************
; NOTE:
; Definitions marked "MEMORY MAPPED"are extended I/O ports
; and cannot be used with IN/OUT instructions
.equ SREG = 0x3f
.equ SPL = 0x3d
.equ GIMSK = 0x3b
.equ GIFR = 0x3a
.equ TIMSK0 = 0x39
.equ TIFR0 = 0x38
.equ SPMCSR = 0x37
.equ OCR0A = 0x36
.equ MCUCR = 0x35
.equ MCUSR = 0x34
.equ TCCR0B = 0x33
.equ TCNT0 = 0x32
.equ OSCCAL = 0x31
.equ TCCR0A = 0x2f
.equ DWDR = 0x2e
.equ OCR0B = 0x29
.equ GTCCR = 0x28
.equ CLKPR = 0x26
.equ WDTCR = 0x21
.equ EEAR = 0x1e
.equ EEDR = 0x1d
.equ EECR = 0x1c
.equ PORTB = 0x18
.equ DDRB = 0x17
.equ PINB = 0x16
.equ PCMSK = 0x15
.equ DIDR0 = 0x14
.equ ACSR = 0x08
.equ ADMUX = 0x07
.equ ADCSRA = 0x06
.equ ADCH = 0x05
.equ ADCL = 0x04
.equ ADCSRB = 0x03
; ***** BIT DEFINITIONS **************************************************
; ***** AD_CONVERTER *****************
; ADMUX - The ADC multiplexer Selection Register
.equ MUX0 = 0 ; Analog Channel and Gain Selection Bits
.equ MUX1 = 1 ; Analog Channel and Gain Selection Bits
.equ ADLAR = 5 ; Left Adjust Result
.equ REFS0 = 6 ; Reference Selection Bit 0
; ADCSRA - The ADC Control and Status register
.equ ADPS0 = 0 ; ADC Prescaler Select Bits
.equ ADPS1 = 1 ; ADC Prescaler Select Bits
.equ ADPS2 = 2 ; ADC Prescaler Select Bits
.equ ADIE = 3 ; ADC Interrupt Enable
.equ ADIF = 4 ; ADC Interrupt Flag
.equ ADATE = 5 ; ADC Auto Trigger Enable
.equ ADSC = 6 ; ADC Start Conversion
.equ ADEN = 7 ; ADC Enable
; ADCH - ADC Data Register High Byte
.equ ADCH0 = 0 ; ADC Data Register High Byte Bit 0
.equ ADCH1 = 1 ; ADC Data Register High Byte Bit 1
.equ ADCH2 = 2 ; ADC Data Register High Byte Bit 2
.equ ADCH3 = 3 ; ADC Data Register High Byte Bit 3
.equ ADCH4 = 4 ; ADC Data Register High Byte Bit 4
.equ ADCH5 = 5 ; ADC Data Register High Byte Bit 5
.equ ADCH6 = 6 ; ADC Data Register High Byte Bit 6
.equ ADCH7 = 7 ; ADC Data Register High Byte Bit 7
; ADCL - ADC Data Register Low Byte
.equ ADCL0 = 0 ; ADC Data Register Low Byte Bit 0
.equ ADCL1 = 1 ; ADC Data Register Low Byte Bit 1
.equ ADCL2 = 2 ; ADC Data Register Low Byte Bit 2
.equ ADCL3 = 3 ; ADC Data Register Low Byte Bit 3
.equ ADCL4 = 4 ; ADC Data Register Low Byte Bit 4
.equ ADCL5 = 5 ; ADC Data Register Low Byte Bit 5
.equ ADCL6 = 6 ; ADC Data Register Low Byte Bit 6
.equ ADCL7 = 7 ; ADC Data Register Low Byte Bit 7
; ADCSRB - ADC Control and Status Register B
.equ ADTS0 = 0 ; ADC Auto Trigger Source 0
.equ ADTS1 = 1 ; ADC Auto Trigger Source 1
.equ ADTS2 = 2 ; ADC Auto Trigger Source 2
; DIDR0 - Digital Input Disable Register 0
.equ ADC1D = 2 ; ADC2 Digital input Disable
.equ ADC3D = 3 ; ADC3 Digital input Disable
.equ ADC2D = 4 ; ADC2 Digital input Disable
.equ ADC0D = 5 ; ADC0 Digital input Disable
; ***** ANALOG_COMPARATOR ************
; ADCSRB - ADC Control and Status Register B
.equ ACME = 6 ; Analog Comparator Multiplexer Enable
; ACSR - Analog Comparator Control And Status Register
.equ ACIS0 = 0 ; Analog Comparator Interrupt Mode Select bit 0
.equ ACIS1 = 1 ; Analog Comparator Interrupt Mode Select bit 1
.equ ACIE = 3 ; Analog Comparator Interrupt Enable
.equ ACI = 4 ; Analog Comparator Interrupt Flag
.equ ACO = 5 ; Analog Compare Output
.equ ACBG = 6 ; Analog Comparator Bandgap Select
.equ AINBG = ACBG ; For compatibility
.equ ACD = 7 ; Analog Comparator Disable
; DIDR0 -
.equ AIN0D = 0 ; AIN0 Digital Input Disable
.equ AIN1D = 1 ; AIN1 Digital Input Disable
; ***** EEPROM ***********************
; EEAR - EEPROM Read/Write Access
.equ EEARL = EEAR ; For compatibility
.equ EEAR0 = 0 ; EEPROM Read/Write Access bit 0
.equ EEAR1 = 1 ; EEPROM Read/Write Access bit 1
.equ EEAR2 = 2 ; EEPROM Read/Write Access bit 2
.equ EEAR3 = 3 ; EEPROM Read/Write Access bit 3
.equ EEAR4 = 4 ; EEPROM Read/Write Access bit 4
.equ EEAR5 = 5 ; EEPROM Read/Write Access bit 5
; EEDR - EEPROM Data Register
.equ EEDR0 = 0 ; EEPROM Data Register bit 0
.equ EEDR1 = 1 ; EEPROM Data Register bit 1
.equ EEDR2 = 2 ; EEPROM Data Register bit 2
.equ EEDR3 = 3 ; EEPROM Data Register bit 3
.equ EEDR4 = 4 ; EEPROM Data Register bit 4
.equ EEDR5 = 5 ; EEPROM Data Register bit 5
.equ EEDR6 = 6 ; EEPROM Data Register bit 6
.equ EEDR7 = 7 ; EEPROM Data Register bit 7
; EECR - EEPROM Control Register
.equ EERE = 0 ; EEPROM Read Enable
.equ EEWE = 1 ; EEPROM Write Enable
.equ EEPE = EEWE ; For compatibility
.equ EEMWE = 2 ; EEPROM Master Write Enable
.equ EEMPE = EEMWE ; For compatibility
.equ EERIE = 3 ; EEProm Ready Interrupt Enable
.equ EEPM0 = 4 ;
.equ EEPM1 = 5 ;
; ***** CPU **************************
; SREG - Status Register
.equ SREG_C = 0 ; Carry Flag
.equ SREG_Z = 1 ; Zero Flag
.equ SREG_N = 2 ; Negative Flag
.equ SREG_V = 3 ; Two's Complement Overflow Flag
.equ SREG_S = 4 ; Sign Bit
.equ SREG_H = 5 ; Half Carry Flag
.equ SREG_T = 6 ; Bit Copy Storage
.equ SREG_I = 7 ; Global Interrupt Enable
; SPL - Stack Pointer Low Byte
.equ SP0 = 0 ; Stack Pointer Bit 0
.equ SP1 = 1 ; Stack Pointer Bit 1
.equ SP2 = 2 ; Stack Pointer Bit 2
.equ SP3 = 3 ; Stack Pointer Bit 3
.equ SP4 = 4
.equ SP5 = 5 ; Stack Pointer Bit 5
.equ SP6 = 6 ; Stack Pointer Bit 6
.equ SP7 = 7 ; Stack Pointer Bit 7
; MCUCR - MCU Control Register
.equ ISC00 = 0 ; Interrupt Sense Control 0 bit 0
.equ ISC01 = 1 ; Interrupt Sense Control 0 bit 1
.equ SM0 = 3 ; Sleep Mode Select Bit 0
.equ SM1 = 4 ; Sleep Mode Select Bit 1
.equ SE = 5 ; Sleep Enable
.equ PUD = 6 ; Pull-up Disable
; MCUSR - MCU Status register
.equ PORF = 0 ; Power-On Reset Flag
.equ EXTRF = 1 ; External Reset Flag
.equ BORF = 2 ; Brown-out Reset Flag
.equ WDRF = 3 ; Watchdog Reset Flag
; OSCCAL - Oscillator Calibration Register
.equ CAL0 = 0 ; Oscillatro Calibration Value Bit 0
.equ CAL1 = 1 ; Oscillatro Calibration Value Bit 1
.equ CAL2 = 2 ; Oscillatro Calibration Value Bit 2
.equ CAL3 = 3 ; Oscillatro Calibration Value Bit 3
.equ CAL4 = 4 ; Oscillatro Calibration Value Bit 4
.equ CAL5 = 5 ; Oscillatro Calibration Value Bit 5
.equ CAL6 = 6 ; Oscillatro Calibration Value Bit 6
; CLKPR - Clock Prescale Register
.equ CLKPS0 = 0 ; Clock Prescaler Select Bit 0
.equ CLKPS1 = 1 ; Clock Prescaler Select Bit 1
.equ CLKPS2 = 2 ; Clock Prescaler Select Bit 2
.equ CLKPS3 = 3 ; Clock Prescaler Select Bit 3
.equ CLKPCE = 7 ; Clock Prescaler Change Enable
; DWDR - Debug Wire Data Register
.equ DWDR0 = 0 ; Debug Wire Data Register Bit 0
.equ DWDR1 = 1 ; Debug Wire Data Register Bit 1
.equ DWDR2 = 2 ; Debug Wire Data Register Bit 2
.equ DWDR3 = 3 ; Debug Wire Data Register Bit 3
.equ DWDR4 = 4 ; Debug Wire Data Register Bit 4
.equ DWDR5 = 5 ; Debug Wire Data Register Bit 5
.equ DWDR6 = 6 ; Debug Wire Data Register Bit 6
.equ DWDR7 = 7 ; Debug Wire Data Register Bit 7
; SPMCSR - Store Program Memory Control and Status Register
.equ SPMEN = 0 ; Store program Memory Enable
.equ PGERS = 1 ; Page Erase
.equ PGWRT = 2 ; Page Write
.equ RFLB = 3 ; Read Fuse and Lock Bits
.equ CTPB = 4 ; Clear Temporary Page Buffer
; ***** PORTB ************************
; PORTB - Data Register, Port B
.equ PORTB0 = 0 ;
.equ PB0 = 0 ; For compatibility
.equ PORTB1 = 1 ;
.equ PB1 = 1 ; For compatibility
.equ PORTB2 = 2 ;
.equ PB2 = 2 ; For compatibility
.equ PORTB3 = 3 ;
.equ PB3 = 3 ; For compatibility
.equ PORTB4 = 4 ;
.equ PB4 = 4 ; For compatibility
.equ PORTB5 = 5 ;
.equ PB5 = 5 ; For compatibility
; DDRB - Data Direction Register, Port B
.equ DDB0 = 0 ;
.equ DDB1 = 1 ;
.equ DDB2 = 2 ;
.equ DDB3 = 3 ;
.equ DDB4 = 4 ;
.equ DDB5 = 5 ;
; PINB - Input Pins, Port B
.equ PINB0 = 0 ;
.equ PINB1 = 1 ;
.equ PINB2 = 2 ;
.equ PINB3 = 3 ;
.equ PINB4 = 4 ;
.equ PINB5 = 5 ;
; ***** EXTERNAL_INTERRUPT ***********
; MCUCR - MCU Control Register
;.equ ISC00 = 0 ; Interrupt Sense Control 0 Bit 0
;.equ ISC01 = 1 ; Interrupt Sense Control 0 Bit 1
; GIMSK - General Interrupt Mask Register
.equ GICR = GIMSK ; For compatibility
.equ PCIE = 5 ; Pin Change Interrupt Enable
.equ INT0 = 6 ; External Interrupt Request 0 Enable
; GIFR - General Interrupt Flag register
.equ PCIF = 5 ; Pin Change Interrupt Flag
.equ INTF0 = 6 ; External Interrupt Flag 0
; PCMSK - Pin Change Enable Mask
.equ PCINT0 = 0 ; Pin Change Enable Mask Bit 0
.equ PCINT1 = 1 ; Pin Change Enable Mask Bit 1
.equ PCINT2 = 2 ; Pin Change Enable Mask Bit 2
.equ PCINT3 = 3 ; Pin Change Enable Mask Bit 3
.equ PCINT4 = 4 ; Pin Change Enable Mask Bit 4
.equ PCINT5 = 5 ; Pin Change Enable Mask Bit 5
; ***** TIMER_COUNTER_0 **************
; TIMSK0 - Timer/Counter0 Interrupt Mask Register
.equ TOIE0 = 1 ; Timer/Counter0 Overflow Interrupt Enable
.equ OCIE0A = 2 ; Timer/Counter0 Output Compare Match A Interrupt Enable
.equ OCIE0B = 3 ; Timer/Counter0 Output Compare Match B Interrupt Enable
; TIFR0 - Timer/Counter0 Interrupt Flag register
.equ TOV0 = 1 ; Timer/Counter0 Overflow Flag
.equ OCF0A = 2 ; Timer/Counter0 Output Compare Flag 0A
.equ OCF0B = 3 ; Timer/Counter0 Output Compare Flag 0B
; OCR0A - Timer/Counter0 Output Compare Register
.equ OCR0_0 = 0 ;
.equ OCR0_1 = 1 ;
.equ OCR0_2 = 2 ;
.equ OCR0_3 = 3 ;
.equ OCR0_4 = 4 ;
.equ OCR0_5 = 5 ;
.equ OCR0_6 = 6 ;
.equ OCR0_7 = 7 ;
; TCCR0A - Timer/Counter Control Register A
.equ WGM00 = 0 ; Waveform Generation Mode
.equ WGM01 = 1 ; Waveform Generation Mode
.equ COM0B0 = 4 ; Compare Match Output B Mode
.equ COM0B1 = 5 ; Compare Match Output B Mode
.equ COM0A0 = 6 ; Compare Match Output A Mode
.equ COM0A1 = 7 ; Compare Match Output A Mode
; TCNT0 - Timer/Counter0
.equ TCNT0_0 = 0 ;
.equ TCNT0_1 = 1 ;
.equ TCNT0_2 = 2 ;
.equ TCNT0_3 = 3 ;
.equ TCNT0_4 = 4 ;
.equ TCNT0_5 = 5 ;
.equ TCNT0_6 = 6 ;
.equ TCNT0_7 = 7 ;
; TCCR0B - Timer/Counter Control Register B
.equ CS00 = 0 ; Clock Select
.equ CS01 = 1 ; Clock Select
.equ CS02 = 2 ; Clock Select
.equ WGM02 = 3 ; Waveform Generation Mode
.equ FOC0B = 6 ; Force Output Compare B
.equ FOC0A = 7 ; Force Output Compare A
; OCR0B - Timer/Counter0 Output Compare Register
;.equ OCR0_0 = 0 ;
;.equ OCR0_1 = 1 ;
;.equ OCR0_2 = 2 ;
;.equ OCR0_3 = 3 ;
;.equ OCR0_4 = 4 ;
;.equ OCR0_5 = 5 ;
;.equ OCR0_6 = 6 ;
;.equ OCR0_7 = 7 ;
; GTCCR - General Timer Conuter Register
.equ PSR10 = 0 ; Prescaler Reset Timer/Counter0
.equ TSM = 7 ; Timer/Counter Synchronization Mode
; ***** WATCHDOG *********************
; WDTCR - Watchdog Timer Control Register
.equ WDP0 = 0 ; Watch Dog Timer Prescaler bit 0
.equ WDP1 = 1 ; Watch Dog Timer Prescaler bit 1
.equ WDP2 = 2 ; Watch Dog Timer Prescaler bit 2
.equ WDE = 3 ; Watch Dog Enable
.equ WDCE = 4 ; Watchdog Change Enable
.equ WDP3 = 5 ; Watchdog Timer Prescaler Bit 3
.equ WDTIE = 6 ; Watchdog Timeout Interrupt Enable
.equ WDTIF = 7 ; Watchdog Timeout Interrupt Flag
; ***** LOCKSBITS ********************************************************
.equ LB1 = 0 ; Lockbit
.equ LB2 = 1 ; Lockbit
; ***** FUSES ************************************************************
; LOW fuse bits
.equ CKSEL0 = 0 ; Select Clock Source
.equ CKSEL1 = 1 ; Select Clock Source
.equ SUT0 = 2 ; Select start-up time
.equ SUT1 = 3 ; Select start-up time
.equ CKDIV8 = 4 ; Start up with system clock divided by 8
.equ WDTON = 5 ; Watch dog timer always on
.equ EESAVE = 6 ; Keep EEprom contents during chip erase
.equ SPIEN = 7 ; SPI programming enable
; HIGH fuse bits
.equ RSTDISBL = 0 ; Disable external reset
.equ BODLEVEL0 = 1 ; Enable BOD and select level
.equ BODLEVEL1 = 2 ; Enable BOD and select level
.equ DWEN = 3 ; DebugWire Enable
.equ SELFPRGEN = 4 ; Self Programming Enable
; ***** CPU REGISTER DEFINITIONS *****************************************
.def XH = r27
.def XL = r26
.def YH = r29
.def YL = r28
.def ZH = r31
.def ZL = r30
; ***** DATA MEMORY DECLARATIONS *****************************************
.equ FLASHEND = 0x01ff ; Note: Word address
.equ IOEND = 0x003f
.equ SRAM_START = 0x0060
.equ SRAM_SIZE = 64
.equ RAMEND = 0x009f
.equ XRAMEND = 0x0000
.equ E2END = 0x003f
.equ EEPROMEND = 0x003f
.equ EEADRBITS = 6
#pragma AVRPART MEMORY PROG_FLASH 1024
#pragma AVRPART MEMORY EEPROM 64
#pragma AVRPART MEMORY INT_SRAM SIZE 64
#pragma AVRPART MEMORY INT_SRAM START_ADDR 0x60
; ***** BOOTLOADER DECLARATIONS ******************************************
.equ PAGESIZE = 16
; ***** INTERRUPT VECTORS ************************************************
.equ INT0addr = 0x0001 ; External Interrupt 0
.equ PCI0addr = 0x0002 ; External Interrupt Request 0
.equ OVF0addr = 0x0003 ; Timer/Counter0 Overflow
.equ ERDYaddr = 0x0004 ; EEPROM Ready
.equ ACIaddr = 0x0005 ; Analog Comparator
.equ OC0Aaddr = 0x0006 ; Timer/Counter Compare Match A
.equ OC0Baddr = 0x0007 ; Timer/Counter Compare Match B
.equ WDTaddr = 0x0008 ; Watchdog Time-out
.equ ADCCaddr = 0x0009 ; ADC Conversion Complete
.equ INT_VECTORS_SIZE = 10 ; size in words
#endif /* _TN13DEF_INC_ */
; ***** END OF FILE ******************************************************