forked from KolibriOS/kolibrios
288 lines
13 KiB
PHP
288 lines
13 KiB
PHP
; Vendor ids
|
|
INTEL_VID = 0x8086
|
|
SIS_VID = 0x1039
|
|
NVIDIA_VID = 0x10DE
|
|
AMD_VID = 0x1022
|
|
|
|
; Device ids
|
|
ICH_DID = 0x2415
|
|
ICH0_DID = 0x2425
|
|
ICH2_DID = 0x2445
|
|
ICH3_DID = 0x2485
|
|
ICH4_DID = 0x24C5
|
|
ICH5_DID = 0x24D5
|
|
MX440_DID = 0x7195
|
|
SI7012_DID = 0x7012
|
|
NFORCE_DID = 0x01B1
|
|
NFORCE2_DID = 0x006A
|
|
AMD8111_DID = 0x764D
|
|
AMD768_DID = 0x7445
|
|
|
|
NAMBAR_REG = 0x10 ; native audio mixer BAR
|
|
NAM_SIZE = 256 ; 256 bytes required.
|
|
|
|
NABMBAR_REG = 0x14 ; native audio bus mastering BAR
|
|
NABM_SIZE = 64 ; 64 bytes
|
|
|
|
IRQ_REG = 0x3c ; IRQ holder for PCI
|
|
INT_REG = 0x3d ; INT pin
|
|
ICH4_CFG_REG = 0x41 ; ICH4 config register
|
|
|
|
|
|
; BUS master registers, accessed via NABMBAR+offset
|
|
|
|
; ICH supports 3 different types of register sets for three types of things
|
|
; it can do, thus:
|
|
;
|
|
; PCM in (for recording) aka PI
|
|
; PCM out (for playback) aka PO
|
|
; MIC in (for recording) aka MC
|
|
|
|
PI_BDBAR_REG = 0 ; PCM in buffer descriptor BAR
|
|
PO_BDBAR_REG = 10h ; PCM out buffer descriptor BAR
|
|
MC_BDBAR_REG = 20h ; MIC in buffer descriptor BAR
|
|
|
|
; each buffer descriptor BAR holds a pointer which has entries to the buffer
|
|
; contents of the .WAV file we're going to play. Each entry is 8 bytes long
|
|
; (more on that later) and can contain 32 entries total, so each BAR is
|
|
; 256 bytes in length, thus:
|
|
|
|
BDL_SIZE = 32*8 ; Buffer Descriptor List size
|
|
INDEX_MASK = 31 ; indexes must be 0-31
|
|
|
|
|
|
|
|
PI_CIV_REG = 4 ; PCM in current Index value (RO)
|
|
PO_CIV_REG = 14h ; PCM out current Index value (RO)
|
|
MC_CIV_REG = 24h ; MIC in current Index value (RO)
|
|
|
|
;8bit read only
|
|
; each current index value is simply a pointer showing us which buffer
|
|
; (0-31) the codec is currently processing. Once this counter hits 31, it
|
|
; wraps back to 0.
|
|
; this can be handy to know, as once it hits 31, we're almost out of data to
|
|
; play back or room to record!
|
|
|
|
|
|
PI_LVI_REG = 5 ; PCM in Last Valid Index
|
|
PO_LVI_REG = 15h ; PCM out Last Valid Index
|
|
MC_LVI_REG = 25h ; MIC in Last Valid Index
|
|
;8bit read/write
|
|
; The Last Valid Index is a number (0-31) to let the codec know what buffer
|
|
; number to stop on after processing. It could be very nasty to play audio
|
|
; from buffers that aren't filled with the audio we want to play.
|
|
|
|
|
|
PI_SR_REG = 6 ; PCM in Status register
|
|
PO_SR_REG = 16h ; PCM out Status register
|
|
MC_SR_REG = 26h ; MIC in Status register
|
|
;16bit read/write
|
|
; status registers. Bitfields follow:
|
|
|
|
FIFO_ERR = BIT4 ; FIFO Over/Underrun W1TC.
|
|
|
|
BCIS = BIT3 ; buffer completion interrupt status.
|
|
; Set whenever the last sample in ANY
|
|
; buffer is finished. Bit is only
|
|
; set when the Interrupt on Complete
|
|
; (BIT4 of control reg) is set.
|
|
|
|
LVBCI = BIT2 ; Set whenever the codec has processed
|
|
; the last buffer in the buffer list.
|
|
; Will fire an interrupt if IOC bit is
|
|
; set. Probably set after the last
|
|
; sample in the last buffer is
|
|
; processed. W1TC
|
|
|
|
|
|
CELV = BIT1 ; Current buffer == last valid.
|
|
; Bit is RO and remains set until LVI is
|
|
; cleared. Probably set up the start
|
|
; of processing for the last buffer.
|
|
|
|
|
|
DCH = BIT0 ; DMA controller halted.
|
|
; set whenever audio stream is stopped
|
|
; or something else goes wrong.
|
|
|
|
|
|
PI_PICB_REG = 8 ; PCM in position in current buffer(RO)
|
|
PO_PICB_REG = 18h ; PCM out position in current buffer(RO)
|
|
MC_PICB_REG = 28h ; MIC in position in current buffer (RO)
|
|
;16bit read only
|
|
; position in current buffer regs show the number of dwords left to be
|
|
; processed in the current buffer.
|
|
;
|
|
|
|
|
|
|
|
|
|
|
|
PI_PIV_REG = 0ah ; PCM in Prefected index value
|
|
PO_PIV_REG = 1ah ; PCM out Prefected index value
|
|
MC_PIV_REG = 2ah ; MIC in Prefected index value
|
|
;8bit, read only
|
|
; Prefetched index value register.
|
|
; tells which buffer number (0-31) has be prefetched. I'd imagine this
|
|
; value follows the current index value fairly closely. (CIV+1)
|
|
;
|
|
|
|
|
|
PI_CR_REG = 0bh ; PCM in Control Register
|
|
PO_CR_REG = 1bh ; PCM out Control Register
|
|
MC_CR_REG = 2bh ; MIC in Control Register
|
|
; 8bit
|
|
; Control register *MUST* only be accessed as an 8bit value.
|
|
; Control register. See bitfields below.
|
|
;
|
|
|
|
|
|
IOCE = BIT4 ; interrupt on complete enable.
|
|
; set this bit if you want an intrtpt
|
|
; to fire whenever LVBCI is set.
|
|
FEIFE = BIT3 ; set if you want an interrupt to fire
|
|
; whenever there is a FIFO (over or
|
|
; under) error.
|
|
LVBIE = BIT2 ; last valid buffer interrupt enable.
|
|
; set if you want an interrupt to fire
|
|
; whenever the completion of the last
|
|
; valid buffer.
|
|
RR = BIT1 ; reset registers. Nukes all regs
|
|
; except bits 4:2 of this register.
|
|
; Only set this bit if BIT 0 is 0
|
|
RPBM = BIT0 ; Run/Pause
|
|
; set this bit to start the codec!
|
|
|
|
|
|
GLOB_CNT_REG = 2ch ; Global control register
|
|
SEC_RES_EN = BIT5 ; secondary codec resume event
|
|
; interrupt enable. Not used here.
|
|
PRI_RES_EN = BIT4 ; ditto for primary. Not used here.
|
|
ACLINK_OFF = BIT3 ; Turn off the AC97 link
|
|
ACWARM_RESET = BIT2 ; Awaken the AC97 link from sleep.
|
|
; registers preserved, bit self clears
|
|
ACCOLD_RESET = BIT1 ; Reset everything in the AC97 and
|
|
; reset all registers. Not self clearin
|
|
;g
|
|
|
|
GPIIE = BIT0 ; GPI Interrupt enable.
|
|
; set if you want an interrupt to
|
|
; fire upon ANY of the bits in the
|
|
; GPI (general pursose inputs?) not used
|
|
;.
|
|
|
|
GLOB_STS_REG = 30h ; Global Status register (RO)
|
|
|
|
MD3 = BIT17 ; modem powerdown status (yawn)
|
|
AD3 = BIT16 ; Audio powerdown status (yawn)
|
|
RD_COMPLETE_STS = BIT15 ; Codec read timed out. 0=normal
|
|
BIT3SLOT12 = BIT14 ; shadowed status of bit 3 in slot 12
|
|
BIT2SLOT12 = BIT13 ; shadowed status of bit 2 in slot 12
|
|
BIT1SLOT12 = BIT12 ; shadowed status of bit 1 in slot 12
|
|
SEC_RESUME_STS = BIT11 ; secondary codec has resumed (and irqed)
|
|
PRI_RESUME_STS = BIT10 ; primary codec has resumed (and irqed)
|
|
SEC_CODEC_RDY = BIT9 ; secondary codec is ready for action
|
|
PRI_CODEC_RDY = BIT8 ; Primary codec is ready for action
|
|
; software must check these bits before
|
|
; starting the codec!
|
|
MIC_IN_IRQ = BIT7 ; MIC in caused an interrupt
|
|
PCM_OUT_IRQ = BIT6 ; One of the PCM out channels IRQed
|
|
PCM_IN_IRQ = BIT5 ; One of the PCM in channels IRQed
|
|
MODEM_OUT_IRQ = BIT2 ; modem out channel IRQed
|
|
MODEM_IN_IRQ = BIT1 ; modem in channel IRQed
|
|
GPI_STS_CHANGE = BIT0 ; set whenever GPI's have changed.
|
|
; BIT0 of slot 12 also reflects this.
|
|
|
|
|
|
ACC_SEMA_REG = 34h ; Codec write semiphore register
|
|
CODEC_BUSY = BIT0 ; codec register I/O is happening
|
|
; self clearing
|
|
|
|
|
|
|
|
;
|
|
; Buffer Descriptors List
|
|
; As stated earlier, each buffer descriptor list is a set of (up to) 32
|
|
; descriptors, each 8 bytes in length. Bytes 0-3 of a descriptor entry point
|
|
; to a chunk of memory to either play from or record to. Bytes 4-7 of an
|
|
; entry describe various control things detailed below.
|
|
;
|
|
; Buffer pointers must always be aligned on a Dword boundry.
|
|
;
|
|
;
|
|
|
|
IOC = BIT31 ; Fire an interrupt whenever this
|
|
; buffer is complete.
|
|
|
|
BUP = BIT30 ; Buffer Underrun Policy.
|
|
; if this buffer is the last buffer
|
|
; in a playback, fill the remaining
|
|
; samples with 0 (silence) or not.
|
|
; It's a good idea to set this to 1
|
|
; for the last buffer in playback,
|
|
; otherwise you're likely to get a lot
|
|
; of noise at the end of the sound.
|
|
|
|
;
|
|
; Bits 15:0 contain the length of the buffer, in number of samples, which
|
|
; are 16 bits each, coupled in left and right pairs, or 32bits each.
|
|
; Luckily for us, that's the same format as .wav files.
|
|
;
|
|
; A value of FFFF is 65536 samples. Running at 44.1Khz, that's just about
|
|
; 1.5 seconds of sample time. FFFF * 32bits is 1FFFFh bytes or 128k of data.
|
|
;
|
|
; A value of 0 in these bits means play no samples.
|
|
;
|
|
|
|
|
|
;*****************************************************************************
|
|
;* AC97 Codec registers include (based on Jeff Leyda AC97 wav player SDK :-)
|
|
;*****************************************************************************
|
|
|
|
; Not all codecs are created =al. Refer to the spec for your specific codec.
|
|
; All registers are 16bits wide. Access to codec registers over the AC97 link
|
|
; is defined by the OEM.
|
|
; Secondary codec's are accessed by ORing in BIT7 of all register accesses.
|
|
|
|
|
|
; each codec/mixer register is 16bits
|
|
|
|
CODEC_RESET_REG = 00 ; reset codec
|
|
CODEC_MASTER_VOL_REG = 02 ; master volume
|
|
CODEC_HP_VOL_REG = 04 ; headphone volume
|
|
CODEC_MASTER_MONO_VOL_REG = 06 ; master mono volume
|
|
CODEC_MASTER_TONE_REG = 08 ; master tone (R+L)
|
|
CODEC_PCBEEP_VOL_REG = 0ah ; PC beep volume
|
|
CODEC_PHONE_VOL_REG = 0ch ; phone volume
|
|
CODEC_MIC_VOL_REG = 0eh ; MIC volume
|
|
CODEC_LINE_IN_VOL_REG = 10h ; line input volume
|
|
CODEC_CD_VOL_REG = 12h ; CD volume
|
|
CODEC_VID_VOL_REG = 14h ; video volume
|
|
CODEC_AUX_VOL_REG = 16h ; aux volume
|
|
CODEC_PCM_OUT_REG = 18h ; PCM output volume
|
|
CODEC_RECORD_SELECT_REG = 1ah ; record select input
|
|
CODEC_RECORD_VOL_REG = 1ch ; record volume
|
|
CODEC_RECORD_MIC_VOL_REG = 1eh ; record mic volume
|
|
CODEC_GP_REG = 20h ; general purpose
|
|
CODEC_3D_CONTROL_REG = 22h ; 3D control
|
|
; 24h is reserved
|
|
CODEC_POWER_CTRL_REG = 26h ; powerdown control
|
|
CODEC_EXT_AUDIO_REG = 28h ; extended audio
|
|
CODEC_EXT_AUDIO_CTRL_REG = 2ah ; extended audio control
|
|
CODEC_PCM_FRONT_DACRATE_REG = 2ch ; PCM out sample rate
|
|
CODEC_PCM_SURND_DACRATE_REG = 2eh ; surround sound sample rate
|
|
CODEC_PCM_LFE_DACRATE_REG = 30h ; LFE sample rate
|
|
CODEC_LR_ADCRATE_REG = 32h ; PCM in sample rate
|
|
CODEC_MIC_ADCRATE_REG = 34h ; mic in sample rate
|
|
|
|
|
|
; registers 36-7a are reserved on the ICH
|
|
|
|
CODEC_VENDORID1_REG = 7ch ; codec vendor ID 1
|
|
CODEC_VENDORID2_REG = 7eh ; codec vendor ID 2
|
|
|
|
|
|
; When 2 codecs are present in the system, use BIT7 to access the 2nd
|
|
; set of registers, ie 80h-feh
|
|
|
|
SECONDARY_CODEC = BIT7 ; 80-8f registers for 2nda |