forked from KolibriOS/kolibrios
Rustem Gimadutdinov (rgimad)
8dfac86e67
- added disk registration in system - added ahci_read (DOES NOT WORK, TODO), ahci_querymedia - other changes git-svn-id: svn://kolibrios.org@9140 a494cfbc-eb01-0410-851d-a64ba20cac60
1230 lines
44 KiB
PHP
1230 lines
44 KiB
PHP
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||
;; ;;
|
||
;; Copyright (C) KolibriOS team 2004-2021. All rights reserved. ;;
|
||
;; Distributed under terms of the GNU General Public License ;;
|
||
;; ;;
|
||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||
|
||
$Revision$
|
||
|
||
PCI_REG_STATUS_COMMAND = 0x0004
|
||
PCI_REG_BAR5 = 0x0024
|
||
|
||
; different SATA device signatures
|
||
SATA_SIG_ATA = 0x00000101 ; SATA drive
|
||
SATA_SIG_ATAPI = 0xEB140101 ; SATAPI drive
|
||
SATA_SIG_SEMB = 0xC33C0101 ; Enclosure management bridge
|
||
SATA_SIG_PM = 0x96690101 ; Port multiplier
|
||
|
||
; Device type constants
|
||
AHCI_DEV_NULL = 0
|
||
AHCI_DEV_SATA = 1
|
||
AHCI_DEV_SEMB = 2
|
||
AHCI_DEV_PM = 3
|
||
AHCI_DEV_SATAPI = 4
|
||
|
||
; ATA commands
|
||
ATA_IDENTIFY = 0xEC
|
||
ATA_CMD_READ_DMA_EX = 0x25
|
||
|
||
; ATA constants
|
||
ATA_DEV_BUSY = 0x80
|
||
ATA_DEV_DRQ = 0x08
|
||
|
||
; ATAPI commands
|
||
ATAPI_IDENTIFY = 0xA1
|
||
|
||
; bit_ prefix means that its index of bit
|
||
; format: bit_AHCI_STR_REG_BIT
|
||
bit_AHCI_HBA_CAP2_BOH = 0 ; Supports BIOS/OS Handoff
|
||
|
||
bit_AHCI_HBA_BOHC_BOS = 0 ; BIOS-Owned Semaphore (BIOS owns controller)
|
||
bit_AHCI_HBA_BOHC_OOS = 1 ; OS-Owned Semaphore (OS owns controller)
|
||
bit_AHCI_HBA_BOHC_BB = 4 ; BIOS Busy (polling bit while BIOS cleans up
|
||
|
||
bit_AHCI_HBA_GHC_AHCI_ENABLE = 31 ; Enable AHCI mode
|
||
bit_AHCI_HBA_GHC_RESET = 0 ; Reset HBA
|
||
bit_AHCI_HBA_GHC_INTERRUPT_ENABLE = 1 ; Enable interrupts from the HBA
|
||
|
||
bit_AHCI_HBA_PxCMD_ST = 0
|
||
bit_AHCI_HBA_PxCMD_FRE = 4
|
||
bit_AHCI_HBA_PxCMD_FR = 14
|
||
bit_AHCI_HBA_PxCMD_CR = 15
|
||
bit_AHCI_HBA_PxIS_TFES = 30
|
||
|
||
AHCI_HBA_PxCMD_ST = 1 shl 0
|
||
AHCI_HBA_PxCMD_FRE = 1 shl 4
|
||
AHCI_HBA_PxCMD_FR = 1 shl 14
|
||
AHCI_HBA_PxCMD_CR = 1 shl 15
|
||
|
||
bit_AHCI_H2D_FLAG_CMD = 7
|
||
|
||
AHCI_HBA_PxSSTS_DET = 0xF
|
||
AHCI_HBA_PORT_IPM_ACTIVE = 1
|
||
AHCI_HBA_PxSSTS_DET_PRESENT = 3
|
||
|
||
AHCI_MAX_PORTS = 32 ;
|
||
;HBA_MEMORY_SIZE = 0x1100
|
||
|
||
AHCI_PORT_TIMEOUT = 1000000
|
||
|
||
; Frame Information Structure Types
|
||
FIS_TYPE_REG_H2D = 0x27 ; Register FIS - host to device
|
||
FIS_TYPE_REG_D2H = 0x34 ; Register FIS - device to host
|
||
FIS_TYPE_DMA_ACT = 0x39 ; DMA activate FIS - device to host
|
||
FIS_TYPE_DMA_SETUP = 0x41 ; DMA setup FIS - bidirectional
|
||
FIS_TYPE_DATA = 0x46 ; Data FIS - bidirectional
|
||
FIS_TYPE_BIST = 0x58 ; BIST activate FIS - bidirectional
|
||
FIS_TYPE_PIO_SETUP = 0x5F ; PIO setup FIS - device to host
|
||
FIS_TYPE_DEV_BITS = 0xA1 ; Set device bits FIS - device to host
|
||
|
||
struct AHCI_DATA
|
||
abar dd ? ; pointer to HBA Memory (BAR5) mapped to virtual kernelspace memory
|
||
pcidev dd ? ; pointer to corresponding PCIDEV structure
|
||
ends
|
||
|
||
; Generic Host Control registers
|
||
struct HBA_MEM
|
||
cap dd ? ; 0x00, Host capabilities
|
||
ghc dd ? ; 0x04, Global host control
|
||
is dd ? ; 0x08, Interrupt status
|
||
pi dd ? ; 0x0C, Port implemented
|
||
version dd ? ; 0x10, Version
|
||
ccc_ctl dd ? ; 0x14, Command completion coalescing control
|
||
ccc_pts dd ? ; 0x18, Command completion coalescing ports
|
||
em_loc dd ? ; 0x1C, Enclosure management location
|
||
em_ctl dd ? ; 0x20, Enclosure management control
|
||
cap2 dd ? ; 0x24, Host capabilities extended
|
||
bohc dd ? ; 0x28, BIOS/OS handoff control and status
|
||
reserved rb (0xA0-HBA_MEM.reserved) ; 0x2C - 0x9F, Reserved
|
||
vendor rb (0x100-HBA_MEM.vendor) ; 0xA0 - 0xFF, Vendor specific
|
||
ports rb (sizeof.HBA_PORT*AHCI_MAX_PORTS) ; 0x100 - 0x10FF, Port control registers, max AHCI_MAX_PORTS
|
||
ends
|
||
|
||
; Port Control registers
|
||
struct HBA_PORT
|
||
command_list_base_l dd ? ; 0x00, command list base address, 1K-byte aligned
|
||
command_list_base_h dd ? ; 0x04, command list base address upper 32 bits, used on 64 bit systems
|
||
fis_base_l dd ? ; 0x08, FIS base address, 256-byte aligned
|
||
fis_base_h dd ? ; 0x0C, FIS base address upper 32 bits, used on 64 bit systems
|
||
interrupt_status dd ? ; 0x10
|
||
interrupt_enable dd ? ; 0x14
|
||
command dd ? ; 0x18, command and status
|
||
reserved0 dd ? ; 0x1C
|
||
task_file_data dd ? ; 0x20
|
||
signature dd ? ; 0x24
|
||
sata_status dd ? ; 0x28, SATA status (SCR0:SStatus)
|
||
sata_control dd ? ; 0x2C, SATA control (SCR2:SControl)
|
||
sata_error dd ? ; 0x30, SATA error (SCR1:SError)
|
||
sata_active dd ? ; 0x34, SATA active (SCR3:SActive)
|
||
command_issue dd ? ; 0x38
|
||
sata_notification dd ? ; 0x3C, SATA notification (SCR4:SNotification)
|
||
fis_based_switch_control dd ? ; 0x40
|
||
reserved1 rd 11 ; 0x44 - 0x6F
|
||
vendor rd 4 ; 0x70 - 0x7F, vendor specific
|
||
ends
|
||
|
||
; Command header structure, size = 32 bytes
|
||
struct HBA_CMD_HDR
|
||
flags1 db ? ; 0bPWACCCCC, P - Prefetchable, W - Write (1: H2D, 0: D2H)
|
||
; A - ATAPI, C - Command FIS length in DWORDS, 2 ~ 16
|
||
|
||
flags2 db ? ; 0bPPPPRCB(Re), P - Port multiplier port, R - Reserved,
|
||
; C - Clear busy upon R_OK, B - BIST, Re - Reset
|
||
|
||
prdtl dw ? ; Physical region descriptor table length in entries
|
||
prdbc dd ? ; Physical region descriptor byte count transferred
|
||
ctba dd ? ; Command table descriptor base address
|
||
ctbau dd ? ; Command table descriptor base address upper 32 bits
|
||
rd 4 ; Reserved
|
||
ends
|
||
|
||
; Physical region descriptor table entry, size = 16 bytes
|
||
struct HBA_PRDT_ENTRY
|
||
dba dd ? ; Data base address
|
||
dbau dd ? ; Data base address upper 32 bits
|
||
dd ? ; Reserved
|
||
flags dd ? ; 0bIR..RD..D, I (1 bit) - Interrupt on completion,
|
||
; R (9 bits) - Reserved, D (22 bits) - Byte count, 4M max
|
||
ends
|
||
|
||
struct HBA_CMD_TBL
|
||
cfis rb 64 ; 0x00, Command FIS
|
||
acmd rb 16 ; 0x40, ATAPI command, 12 or 16 bytes
|
||
rb 48 ; 0x50, Reserved
|
||
prdt_entry HBA_PRDT_ENTRY ; 0x80, Physical region descriptor table entries, 0 ~ 65535
|
||
; so, this structure is variable-length
|
||
ends
|
||
|
||
; Contains virtual mappings for port phys memory regions
|
||
struct PORT_DATA
|
||
clb dd ? ; Command list base
|
||
fb dd ? ; FIS base
|
||
ctba_arr rd 32 ; ctba_arr[0] = clb[0].ctba, ... and so on.
|
||
port dd ? ; address of correspoding HBA_PORT structure
|
||
portno dd ? ; port index, 0..31
|
||
drive_type db ? ; drive type
|
||
sector_count dq ? ; number of sectors
|
||
ends
|
||
|
||
; Register FIS – Host to Device
|
||
struct FIS_REG_H2D
|
||
fis_type db ? ; FIS_TYPE_REG_H2D
|
||
flags db ? ; 0bCRRRPPPP, C - 1: Command, 0: Control
|
||
; R - Reserved, P - Port multiplier
|
||
|
||
command db ? ; Command register
|
||
featurel db ? ; Feature register, 7:0
|
||
|
||
lba0 db ? ; LBA low register, 7:0
|
||
lba1 db ? ; LBA mid register, 15:8
|
||
lba2 db ? ; LBA high register, 23:16
|
||
device db ? ; Device register
|
||
|
||
lba3 db ? ; LBA register, 31:24
|
||
lba4 db ? ; LBA register, 39:32
|
||
lba5 db ? ; LBA register, 47:40
|
||
featureh db ? ; Feature register, 15:8
|
||
|
||
countl db ? ; Count register, 7:0
|
||
counth db ? ; Count register, 15:8
|
||
icc db ? ; Isochronous command completion
|
||
control db ? ; Control register
|
||
|
||
rb 4 ; Reserved
|
||
ends
|
||
|
||
; Register FIS – Device to Host
|
||
struct FIS_REG_D2H
|
||
fis_type db ? ; FIS_TYPE_REG_D2H
|
||
|
||
flags db ? ; 0bRIRPPPP, P - Port multiplier, R - Reserved
|
||
; I - Interrupt bit
|
||
|
||
status db ? ; Status register
|
||
error db ? ; Error register
|
||
|
||
lba0 db ? ; LBA low register, 7:0
|
||
lba1 db ? ; LBA mid register, 15:8
|
||
lba2 db ? ; LBA high register, 23:16
|
||
device db ? ; Device register
|
||
|
||
lba3 db ? ; LBA register, 31:24
|
||
lba4 db ? ; LBA register, 39:32
|
||
lba5 db ? ; LBA register, 47:40
|
||
db ? ; Reserved
|
||
|
||
countl db ? ; Count register, 7:0
|
||
counth db ? ; Count register, 15:8
|
||
rb 2 ; Reserved
|
||
|
||
rb 4 ; Reserved
|
||
ends
|
||
|
||
; Data FIS – Bidirectional
|
||
struct FIS_DATA
|
||
fis_type db ? ; FIS_TYPE_DATA
|
||
flags db ? ; 0bRRRRPPPP, R - Reserved, P - Port multiplier
|
||
rb 2 ; Reserved
|
||
; DWORD 1 ~ N (?)
|
||
data rd 1 ; Payload
|
||
ends
|
||
|
||
; PIO Setup – Device to Host
|
||
struct FIS_PIO_SETUP
|
||
fis_type db ? ; FIS_TYPE_PIO_SETUP
|
||
|
||
flags db ? ; 0bRIDRPPPP, P - Port multiplier, R - Reserved
|
||
; I - Interrupt bit, D - Data transfer direction, 1 - device to host
|
||
|
||
status db ? ; Status register
|
||
error db ? ; Error register
|
||
|
||
lba0 db ? ; LBA low register, 7:0
|
||
lba1 db ? ; LBA mid register, 15:8
|
||
lba2 db ? ; LBA high register, 23:16
|
||
device db ? ; Device register
|
||
|
||
lba3 db ? ; LBA register, 31:24
|
||
lba4 db ? ; LBA register, 39:32
|
||
lba5 db ? ; LBA register, 47:40
|
||
db ? ; Reserved
|
||
|
||
countl db ? ; Count register, 7:0
|
||
counth db ? ; Count register, 15:8
|
||
db ? ; Reserved
|
||
e_status db ? ; New value of status register
|
||
|
||
tc dw ? ; Transfer count
|
||
rb 2 ; Reserved
|
||
ends
|
||
|
||
; DMA Setup – Device to Host
|
||
struct FIS_DMA_SETUP
|
||
fis_type db ? ; FIS_TYPE_DMA_SETUP
|
||
flags db ? ; 0bAIDRPPPP, A - Auto-activate. Specifies if DMA Activate FIS is needed,
|
||
; I - Interrupt bit, D - Data transfer direction, 1 - device to host,
|
||
; R - Reserved, P - Port multiplier
|
||
|
||
rb 2 ; Reserved
|
||
DMAbufferID dq ? ; DMA Buffer Identifier.
|
||
; Used to Identify DMA buffer in host memory.
|
||
; SATA Spec says host specific and not in Spec.
|
||
; Trying AHCI spec might work.
|
||
|
||
dd ? ; Reserved
|
||
DMAbufOffset dd ? ; Byte offset into buffer. First 2 bits must be 0
|
||
TransferCount dd ? ; Number of bytes to transfer. Bit 0 must be 0
|
||
dd ? ; Reserved
|
||
ends
|
||
|
||
; Set device bits FIS - device to host
|
||
struct FIS_DEV_BITS
|
||
fis_type db ? ; FIS_TYPE_DEV_BITS
|
||
flags db ? ; 0bNIRRPPPP, N - Notification, I - Interrupt,
|
||
; R - Reserved, P - Port multiplier
|
||
|
||
status db ? ; Status register
|
||
error db ? ; Error register
|
||
|
||
protocol dd ? ; Protocol
|
||
ends
|
||
|
||
struct HBA_FIS
|
||
dsfis FIS_DMA_SETUP ; 0x00, DMA Setup FIS
|
||
rb 4 ; padding
|
||
|
||
psfis FIS_PIO_SETUP ; 0x20, PIO Setup FIS
|
||
rb 12 ; padding
|
||
|
||
rfis FIS_REG_D2H ; 0x40, Register - Device to Host FIS
|
||
rb 4 ; padding
|
||
|
||
sdbfis FIS_DEV_BITS ; 0x58, Set Device Bit FIS
|
||
|
||
ufis rb 64 ; 0x60
|
||
|
||
rb (0x100 - 0xA0) ; 0xA0, Reserved
|
||
ends
|
||
|
||
; --------------------------------------------------
|
||
uglobal
|
||
align 4
|
||
ahci_controller AHCI_DATA
|
||
port_data_arr rb (sizeof.PORT_DATA*AHCI_MAX_PORTS)
|
||
ahci_mutex MUTEX
|
||
endg
|
||
|
||
iglobal
|
||
align 4
|
||
ahci_callbacks:
|
||
dd ahci_callbacks.end - ahci_callbacks
|
||
dd 0 ; no close function
|
||
dd 0 ; no closemedia function
|
||
dd ahci_querymedia
|
||
dd ahci_read
|
||
dd 0;ahci_write
|
||
dd 0 ; no flush function
|
||
dd 0 ; use default cache size
|
||
.end:
|
||
hd_name db 'hd', 0, 0, 0
|
||
hd_counter dd 0
|
||
endg
|
||
|
||
; -----------------------------------------------------------------------
|
||
; detect ahci controller and initialize
|
||
align 4
|
||
ahci_init:
|
||
mov ecx, ahci_mutex
|
||
call mutex_init
|
||
|
||
mov ecx, ahci_controller
|
||
mov esi, pcidev_list
|
||
.find_ahci_ctr:
|
||
mov esi, [esi + PCIDEV.fd]
|
||
cmp esi, pcidev_list
|
||
jz .ahci_ctr_not_found
|
||
mov eax, [esi + PCIDEV.class]
|
||
;DEBUGF 1, "K: device class = %x\n", eax
|
||
shr eax, 8 ; shift right because lowest 8 bits if ProgIf field
|
||
cmp eax, 0x0106 ; 0x01 - Mass Storage Controller class, 0x06 - Serial ATA Controller subclass
|
||
jz .ahci_ctr_found
|
||
jmp .find_ahci_ctr
|
||
|
||
.ahci_ctr_not_found:
|
||
DEBUGF 1, "K: AHCI controller not found\n"
|
||
ret
|
||
|
||
.ahci_ctr_found:
|
||
mov [ahci_controller + AHCI_DATA.pcidev], esi
|
||
|
||
mov eax, [esi+PCIDEV.class]
|
||
movzx ebx, byte [esi+PCIDEV.bus]
|
||
movzx ecx, byte [esi+PCIDEV.devfn]
|
||
shr ecx, 3 ; get rid of 3 lowest bits (function code), the rest bits is device code
|
||
movzx edx, byte [esi+PCIDEV.devfn]
|
||
and edx, 00000111b ; get only 3 lowest bits (function code)
|
||
DEBUGF 1, "K: found AHCI controller, (class, subcl, progif) = %x, bus = %x, device = %x, function = %x\n", eax, ebx, ecx, edx
|
||
|
||
; get BAR5 value, it is physical address
|
||
movzx ebx, [esi + PCIDEV.bus]
|
||
movzx ebp, [esi + PCIDEV.devfn]
|
||
stdcall pci_read32, ebx, ebp, PCI_REG_BAR5
|
||
DEBUGF 1, "K: AHCI controller MMIO = %x\n", eax
|
||
mov edi, eax
|
||
|
||
; get the size of MMIO region
|
||
stdcall pci_write32, ebx, ebp, PCI_REG_BAR5, 0xFFFFFFFF
|
||
stdcall pci_read32, ebx, ebp, PCI_REG_BAR5
|
||
not eax
|
||
inc eax
|
||
DEBUGF 1, "K: AHCI: MMIO region size = 0x%x bytes\n", eax
|
||
|
||
; Map MMIO region to virtual memory
|
||
stdcall map_io_mem, edi, eax, PG_SWR + PG_NOCACHE
|
||
mov [ahci_controller + AHCI_DATA.abar], eax
|
||
DEBUGF 1, "K: AHCI controller BAR5 mapped to virtual addr %x\n", eax
|
||
|
||
; Restore the original BAR5 value
|
||
stdcall pci_write32, ebx, ebp, PCI_REG_BAR5, edi
|
||
|
||
; Enable dma bus mastering, memory space access, clear the "disable interrupts" bit
|
||
; Usually, it is already done before us
|
||
movzx ebx, [esi + PCIDEV.bus]
|
||
movzx ebp, [esi + PCIDEV.devfn]
|
||
stdcall pci_read32, ebx, ebp, PCI_REG_STATUS_COMMAND
|
||
DEBUGF 1, "K: AHCI: pci_status_command = %x\nEnabling interrupts, DMA bus mastering and memory space access\n", eax
|
||
or eax, 0x06 ; pci.command |= 0x06 (dma bus mastering + memory space access)
|
||
btr eax, 10 ; clear the "disable interrupts" bit
|
||
DEBUGF 1, "K: AHCI: pci_status_command = %x\n", eax
|
||
stdcall pci_write32, ebx, ebp, PCI_REG_STATUS_COMMAND, eax
|
||
|
||
; ; Print some register values to debug board
|
||
; mov esi, [ahci_controller + AHCI_DATA.abar]
|
||
; DEBUGF 1, "K: AHCI: HBA.cap = %x, HBA.ghc = %x, HBA_MEM.version = %x\n", [esi + HBA_MEM.cap], [esi + HBA_MEM.ghc], [esi + HBA_MEM.version]
|
||
|
||
;-------------------------------------------------------
|
||
; Request BIOS/OS ownership handoff, if supported. (TODO check correctness)
|
||
mov esi, [ahci_controller + AHCI_DATA.abar]
|
||
;mov ebx, [esi + HBA_MEM.cap2]
|
||
;DEBUGF 1, "K: AHCI: HBA_MEM.cap2 = %x\n", ebx
|
||
bt [esi + HBA_MEM.cap2], bit_AHCI_HBA_CAP2_BOH
|
||
jnc .end_handoff
|
||
DEBUGF 1, "K: AHCI: requesting AHCI ownership change...\n"
|
||
bts [esi + HBA_MEM.bohc], bit_AHCI_HBA_BOHC_OOS
|
||
|
||
.wait_not_bos:
|
||
bt [esi + HBA_MEM.bohc], bit_AHCI_HBA_BOHC_BOS
|
||
jc .wait_not_bos
|
||
|
||
mov ebx, 3
|
||
call delay_hs
|
||
|
||
; if Bios Busy is still set after 30 mS, wait 2 seconds.
|
||
bt [esi + HBA_MEM.bohc], bit_AHCI_HBA_BOHC_BB
|
||
jnc @f
|
||
|
||
mov ebx, 200
|
||
call delay_hs
|
||
@@:
|
||
DEBUGF 1, "K: AHCI: ownership change completed.\n"
|
||
|
||
.end_handoff:
|
||
;-------------------------------------------------------
|
||
|
||
; enable the AHCI and reset it
|
||
bts [esi + HBA_MEM.ghc], bit_AHCI_HBA_GHC_AHCI_ENABLE
|
||
bts [esi + HBA_MEM.ghc], bit_AHCI_HBA_GHC_RESET
|
||
|
||
; wait for reset to complete
|
||
.wait_reset:
|
||
bt [esi + HBA_MEM.ghc], bit_AHCI_HBA_GHC_RESET
|
||
jc .wait_reset
|
||
|
||
; enable the AHCI and interrupts
|
||
bts [esi + HBA_MEM.ghc], bit_AHCI_HBA_GHC_AHCI_ENABLE
|
||
bts [esi + HBA_MEM.ghc], bit_AHCI_HBA_GHC_INTERRUPT_ENABLE
|
||
mov ebx, 2
|
||
call delay_hs
|
||
|
||
DEBUGF 1, "K: AHCI: caps: %x %x, ver: %x, ghc: %x, pi: %x\n", [esi + HBA_MEM.cap], [esi + HBA_MEM.cap2], [esi + HBA_MEM.version], [esi + HBA_MEM.ghc], [esi + HBA_MEM.pi]
|
||
|
||
; TODO:
|
||
; calculate irq line
|
||
; ahciHBA->ghc |= AHCI_GHC_IE;
|
||
; IDT::RegisterInterruptHandler(irq, InterruptHandler);
|
||
; ahciHBA->is = 0xffffffff;
|
||
|
||
mov [hd_counter], 0
|
||
xor ebx, ebx
|
||
.detect_drives:
|
||
cmp ebx, AHCI_MAX_PORTS
|
||
jae .end_detect_drives
|
||
|
||
; if port with index ebx is not implemented then go to next
|
||
mov ecx, [esi + HBA_MEM.pi]
|
||
bt ecx, ebx
|
||
jnc .continue_detect_drives
|
||
|
||
mov edi, ebx
|
||
imul edi, sizeof.HBA_PORT
|
||
add edi, HBA_MEM.ports
|
||
add edi, esi
|
||
; now edi - base of HBA_MEM.ports[ebx]
|
||
|
||
DEBUGF 1, "K: AHCI: port %d, cmd = %x, ssts = %x\n", ebx, [edi + HBA_PORT.command], [edi + HBA_PORT.sata_status]
|
||
|
||
; If port is not idle force it to be idle
|
||
mov eax, [edi + HBA_PORT.command]
|
||
and eax, (AHCI_HBA_PxCMD_ST or AHCI_HBA_PxCMD_CR or AHCI_HBA_PxCMD_FRE or AHCI_HBA_PxCMD_FR)
|
||
test eax, eax
|
||
jz @f
|
||
|
||
mov eax, edi
|
||
DEBUGF 1, "ahci_stop_cmd..\n"
|
||
call ahci_stop_cmd
|
||
@@:
|
||
; TODO: what is purpose of this block of code ?
|
||
; Reset port, disable slumber and partial state
|
||
; mov [edi + HBA_PORT.sata_control], 0x301
|
||
; push ebx
|
||
; mov ebx, 5 ; wait 50 ms
|
||
; call delay_hs
|
||
; pop ebx
|
||
; mov [edi + HBA_PORT.sata_control], 0x300
|
||
|
||
; if(abar->cap & HBA_MEM_CAP_SSS)
|
||
; {
|
||
; abar->ports[i].cmd |= (HBA_PxCMD_SUD | HBA_PxCMD_POD | HBA_PxCMD_ICC);
|
||
; Sleep(10);
|
||
; }
|
||
; rewritten to:
|
||
bt [esi + HBA_MEM.cap], 27 ; check Supports Staggered Spin-up bit in capabilities
|
||
jnc @f
|
||
DEBUGF 1, "Supports Staggered Spin-up, spinning up the port..\n"
|
||
or [edi + HBA_PORT.command], (0x0002 or 0x0004 or 0x10000000)
|
||
push ebx
|
||
mov ebx, 1 ; wait 10 ms
|
||
call delay_hs
|
||
pop ebx
|
||
@@:
|
||
; Clear interrupt status and error status
|
||
mov [edi + HBA_PORT.sata_error], 0xFFFFFFFF
|
||
mov [edi + HBA_PORT.interrupt_status], 0xFFFFFFFF
|
||
|
||
; ------------------------------------------
|
||
|
||
mov ecx, [edi + HBA_PORT.sata_status]
|
||
shr ecx, 8
|
||
and ecx, 0x0F
|
||
cmp ecx, AHCI_HBA_PORT_IPM_ACTIVE
|
||
jne .continue_detect_drives
|
||
|
||
mov ecx, [edi + HBA_PORT.sata_status]
|
||
and ecx, AHCI_HBA_PxSSTS_DET
|
||
cmp ecx, AHCI_HBA_PxSSTS_DET_PRESENT
|
||
jne .continue_detect_drives
|
||
|
||
; DEBUGF 1, "K: AHCI: found drive at port %d, cmd = 0x%x, ssts = 0x%x, signature = 0x%x\n", ebx, [edi + HBA_PORT.command], [edi + HBA_PORT.sata_status], [edi + HBA_PORT.signature]
|
||
|
||
mov ecx, ebx
|
||
imul ecx, sizeof.PORT_DATA
|
||
add ecx, port_data_arr
|
||
stdcall ahci_port_rebase, edi, ebx, ecx
|
||
|
||
; DEBUGF 1, "K: AHCI: After REBASING, signature = 0x%x\n", [edi + HBA_PORT.signature]
|
||
|
||
; Determine drive type by checking port signature
|
||
.switch_sig:
|
||
cmp [edi + HBA_PORT.signature], SATA_SIG_ATA
|
||
mov eax, AHCI_DEV_SATA
|
||
jz .end_switch_sig
|
||
|
||
cmp [edi + HBA_PORT.signature], SATA_SIG_ATAPI
|
||
mov eax, AHCI_DEV_SATAPI
|
||
jz .end_switch_sig
|
||
|
||
cmp [edi + HBA_PORT.signature], SATA_SIG_SEMB
|
||
mov eax, AHCI_DEV_SEMB
|
||
jz .end_switch_sig
|
||
|
||
cmp [edi + HBA_PORT.signature], SATA_SIG_PM
|
||
mov eax, AHCI_DEV_PM
|
||
jz .end_switch_sig
|
||
|
||
DEBUGF 1, "Unknown device signature\n"
|
||
mov eax, AHCI_DEV_NULL
|
||
.end_switch_sig:
|
||
mov [ecx + PORT_DATA.drive_type], al
|
||
|
||
DEBUGF 1, "K: AHCI: found drive on port %u: TYPE = %u\n", ebx, [ecx + PORT_DATA.drive_type]
|
||
|
||
stdcall ahci_port_identify, ecx
|
||
|
||
cmp [ecx + PORT_DATA.drive_type], AHCI_DEV_SATA
|
||
jne .after_add_disk ; skip adding disk code
|
||
; register disk in system:
|
||
push ecx edx
|
||
mov eax, [hd_counter]
|
||
xor edx, edx
|
||
mov ecx, 10
|
||
div ecx ; eax = hd_counter / 10, edx = hd_counter % 10
|
||
test eax, eax
|
||
jz .concat_one
|
||
add al, '0'
|
||
mov byte [hd_name + 2], al
|
||
add dl, '0'
|
||
mov byte [hd_name + 3], dl
|
||
jmp .endif1
|
||
.concat_one:
|
||
add dl, '0'
|
||
mov byte [hd_name + 2], dl
|
||
.endif1:
|
||
pop edx ecx
|
||
|
||
DEBUGF 1, "adding '%s'\n", hd_name
|
||
|
||
stdcall disk_add, ahci_callbacks, hd_name, ecx, 0
|
||
test eax, eax
|
||
jz .disk_add_fail
|
||
stdcall disk_media_changed, eax, 1 ; system will scan for partitions on disk
|
||
jmp .after_add_disk
|
||
|
||
.disk_add_fail:
|
||
DEBUGF 1, "Failed to add disk\n"
|
||
.after_add_disk:
|
||
|
||
.continue_detect_drives:
|
||
inc ebx
|
||
jmp .detect_drives
|
||
|
||
|
||
|
||
.end_detect_drives:
|
||
|
||
|
||
ret
|
||
; -------------------------------------------------
|
||
|
||
modelstr rb 42
|
||
; Identify drive on port ; TODO check
|
||
; in: pdata - address of PORT_DATA structure
|
||
proc ahci_port_identify stdcall, pdata: dword
|
||
locals
|
||
cmdslot dd ?
|
||
cmdheader dd ?
|
||
cmdtable dd ?
|
||
buf_phys dd ?
|
||
buf_virt dd ?
|
||
endl
|
||
|
||
pushad
|
||
|
||
mov esi, [pdata] ; esi - address of PORT_DATA struct of port
|
||
mov edi, [esi + PORT_DATA.port] ; edi - address of HBA_PORT struct of port
|
||
|
||
mov eax, edi
|
||
call ahci_find_cmdslot
|
||
|
||
cmp eax, -1
|
||
jne .cmdslot_found
|
||
|
||
DEBUGF 1, "No free cmdslot on port %u\n", [esi + PORT_DATA.portno]
|
||
jmp .ret
|
||
|
||
.cmdslot_found:
|
||
mov [cmdslot], eax
|
||
; DEBUGF 1, "Found free cmdslot %u on port %u\n", [cmdslot], [esi + PORT_DATA.portno]
|
||
|
||
shl eax, BSF sizeof.HBA_CMD_HDR
|
||
add eax, [esi + PORT_DATA.clb]
|
||
mov [cmdheader], eax ; address of virtual mapping of command header
|
||
mov eax, [cmdslot]
|
||
mov eax, [esi + eax*4 + PORT_DATA.ctba_arr]
|
||
mov [cmdtable], eax ; address of virtual mapping of command table of command header
|
||
|
||
stdcall _memset, eax, 0, sizeof.HBA_CMD_TBL
|
||
|
||
call alloc_page
|
||
mov [buf_phys], eax
|
||
|
||
stdcall map_io_mem, eax, 4096, PG_NOCACHE + PG_SWR ; map to virt memory so we can work with it
|
||
mov [buf_virt], eax
|
||
|
||
mov eax, [cmdtable]
|
||
mov ebx, [buf_phys]
|
||
mov dword [eax + HBA_CMD_TBL.prdt_entry + HBA_PRDT_ENTRY.dba], ebx
|
||
mov dword [eax + HBA_CMD_TBL.prdt_entry + HBA_PRDT_ENTRY.dbau], 0
|
||
and [eax + HBA_CMD_TBL.prdt_entry + HBA_PRDT_ENTRY.flags], not 0x3FFFFF ; zero out lower 22 bits, they used for byte count
|
||
or [eax + HBA_CMD_TBL.prdt_entry + HBA_PRDT_ENTRY.flags], 512 - 1 ; reason why -1 see in spec on this field
|
||
; or [eax + HBA_CMD_TBL.prdt_entry + HBA_PRDT_ENTRY.flags], 1 shl 31 ; enable interrupt on completion
|
||
|
||
mov eax, [cmdheader]
|
||
and [eax + HBA_CMD_HDR.flags1], not 0x1F ; zero out lower 5 bits, they will be used for cfl
|
||
or [eax + HBA_CMD_HDR.flags1], (sizeof.FIS_REG_H2D / 4) ; set command fis length in dwords
|
||
movzx bx, [eax + HBA_CMD_HDR.flags1]
|
||
btr bx, 6 ; flag W = 0
|
||
mov [eax + HBA_CMD_HDR.flags1], bl
|
||
movzx bx, [eax + HBA_CMD_HDR.flags2]
|
||
btr bx, 2 ; flag C = 0
|
||
mov [eax + HBA_CMD_HDR.flags2], bl
|
||
mov [eax + HBA_CMD_HDR.prdtl], 1
|
||
|
||
mov eax, [cmdtable]
|
||
mov byte [eax + HBA_CMD_TBL.cfis + FIS_REG_H2D.fis_type], FIS_TYPE_REG_H2D
|
||
movzx ebx, byte [eax + HBA_CMD_TBL.cfis + FIS_REG_H2D.flags]
|
||
bts ebx, bit_AHCI_H2D_FLAG_CMD ; Set Command bit in H2D FIS.
|
||
mov byte [eax + HBA_CMD_TBL.cfis + FIS_REG_H2D.flags], bl
|
||
|
||
mov byte [eax + HBA_CMD_TBL.cfis + FIS_REG_H2D.command], ATA_IDENTIFY
|
||
cmp [esi + PORT_DATA.drive_type], AHCI_DEV_SATAPI
|
||
jne @f
|
||
mov byte [eax + HBA_CMD_TBL.cfis + FIS_REG_H2D.command], ATAPI_IDENTIFY
|
||
@@:
|
||
mov byte [eax + HBA_CMD_TBL.cfis + FIS_REG_H2D.device], 0
|
||
|
||
; Wait on previous command to complete, before issuing new command.
|
||
stdcall ahci_port_wait, edi, AHCI_PORT_TIMEOUT
|
||
; DEBUGF 1, "eax = %x\n", eax
|
||
; TODO check eax error value
|
||
|
||
mov eax, [cmdslot]
|
||
bts [edi + HBA_PORT.command_issue], eax ; Issue the command
|
||
|
||
; Wait for command completion
|
||
stdcall ahci_port_cmd_wait, edi, eax;, AHCI_PORT_CMD_TIMEOUT
|
||
; DEBUGF 1, " eax = %x\n", eax
|
||
; TODO check eax error value
|
||
|
||
; DEBUGF 1, "sata_error register = 0x%x\n", [edi + HBA_PORT.sata_error]
|
||
|
||
mov esi, [buf_virt]
|
||
add esi, 27*2
|
||
mov edi, modelstr
|
||
mov ecx, ((46-27)+1)*2
|
||
cld
|
||
rep movsb
|
||
mov byte [edi], 0
|
||
|
||
stdcall swap_bytes_in_words, modelstr, (46-27)+1
|
||
DEBUGF 1, "IDENTIFICATION RESULT: MODEL = %s\n", modelstr
|
||
|
||
mov esi, [buf_virt]
|
||
mov eax, [esi + 200]
|
||
mov edx, [esi + 200 + 4]
|
||
DEBUGF 1, "lba48 mode sector count = 0x%x:%x\n", edx, eax
|
||
|
||
shrd eax, edx, 11 ; i.e *512 / 1024 / 1024, 512 - sector size
|
||
DEBUGF 1, "disk capacity = %u MiB ", eax
|
||
shrd eax, edx, 10 ; / 1024
|
||
DEBUGF 1, "= %u GiB\n", eax
|
||
.ret:
|
||
popad
|
||
ret
|
||
endp
|
||
|
||
proc ahci_querymedia stdcall, pdata, mediainfo
|
||
push ecx edx
|
||
mov eax, [mediainfo]
|
||
mov edx, [pdata]
|
||
mov [eax + DISKMEDIAINFO.Flags], 0
|
||
mov [eax + DISKMEDIAINFO.SectorSize], 512
|
||
mov ecx, dword[edx + PORT_DATA.sector_count]
|
||
mov dword [eax + DISKMEDIAINFO.Capacity], ecx
|
||
mov ecx, dword[edx + PORT_DATA.sector_count + 4]
|
||
mov dword [eax + DISKMEDIAINFO.Capacity + 4], ecx
|
||
pop edx ecx
|
||
xor eax, eax
|
||
ret
|
||
endp
|
||
|
||
; Read sectors
|
||
; return value: 0 = success, otherwise = error
|
||
proc ahci_read stdcall pdata: dword, buffer: dword, startsector: qword, numsectors_ptr:dword
|
||
locals
|
||
cmdslot dd ?
|
||
cmdheader dd ?
|
||
cmdtable dd ?
|
||
numsectors dd ?
|
||
buffer_pos dd ?
|
||
buffer_length dd ?
|
||
endl
|
||
|
||
pushad
|
||
|
||
mov ecx, ahci_mutex
|
||
call mutex_lock
|
||
|
||
; xor ecx, ecx
|
||
; mov esi, [buffer]
|
||
; .print_data:
|
||
; cmp ecx, 512
|
||
; jae .end_print_data
|
||
|
||
; mov al, byte [esi + ecx]
|
||
; mov byte [tmpstr], al
|
||
; mov byte [tmpstr + 1], 0
|
||
; DEBUGF 1, "0x%x(%s) ", al:1, tmpstr
|
||
|
||
; inc ecx
|
||
; jmp .print_data
|
||
; .end_print_data:
|
||
; DEBUGF 1, "\n"
|
||
|
||
mov eax, [numsectors_ptr]
|
||
mov eax, [eax]
|
||
mov [numsectors], eax
|
||
|
||
DEBUGF 1, " ahci_read: buffer = 0x%x, startsector = 0x%x:%x, numsectors = %u\n", [buffer], [startsector], [startsector + 4], eax
|
||
|
||
mov esi, [pdata] ; esi - address of PORT_DATA struct of port
|
||
mov edi, [esi + PORT_DATA.port] ; edi - address of HBA_PORT struct of port
|
||
mov eax, edi
|
||
call ahci_find_cmdslot
|
||
cmp eax, -1
|
||
jne .cmdslot_found
|
||
|
||
DEBUGF 1, "No free cmdslot on port %u\n", [esi + PORT_DATA.portno]
|
||
jmp .ret
|
||
|
||
.cmdslot_found:
|
||
mov [cmdslot], eax
|
||
; DEBUGF 1, "Found free cmdslot %u on port %u\n", [cmdslot], [esi + PORT_DATA.portno]
|
||
|
||
shl eax, BSF sizeof.HBA_CMD_HDR
|
||
add eax, [esi + PORT_DATA.clb]
|
||
mov [cmdheader], eax ; address of virtual mapping of command header
|
||
mov eax, [cmdslot]
|
||
mov eax, [esi + eax*4 + PORT_DATA.ctba_arr]
|
||
mov [cmdtable], eax ; address of virtual mapping of command table of command header
|
||
|
||
mov eax, [cmdheader]
|
||
and [eax + HBA_CMD_HDR.flags1], not 0x1F ; zero out lower 5 bits, they will be used for cfl
|
||
or [eax + HBA_CMD_HDR.flags1], (sizeof.FIS_REG_H2D / 4) ; set command fis length in dwords
|
||
movzx bx, [eax + HBA_CMD_HDR.flags1]
|
||
btr bx, 6 ; flag W = 0
|
||
mov [eax + HBA_CMD_HDR.flags1], bl
|
||
movzx bx, [eax + HBA_CMD_HDR.flags2]
|
||
btr bx, 2 ; flag C = 0
|
||
mov [eax + HBA_CMD_HDR.flags2], bl
|
||
|
||
mov ebx, [numsectors]
|
||
shl ebx, 9 ; *= 512
|
||
mov [buffer_length], ebx
|
||
dec ebx
|
||
shr ebx, 12 ; /= 4096
|
||
inc ebx
|
||
mov [eax + HBA_CMD_HDR.prdtl], bx
|
||
;DEBUGF 1, " prdtl = %u\n", [eax + HBA_CMD_HDR.prdtl]:2
|
||
|
||
; zero out the command table with its prdt entries
|
||
dec ebx
|
||
shl ebx, BSF sizeof.HBA_PRDT_ENTRY
|
||
add ebx, sizeof.HBA_CMD_TBL
|
||
stdcall _memset, [cmdtable], 0, ebx
|
||
|
||
DEBUGF 1, " prdtl = %u\n", [eax + HBA_CMD_HDR.prdtl]:2
|
||
;jmp .ret
|
||
|
||
xor ecx, ecx
|
||
movzx edx, [eax + HBA_CMD_HDR.prdtl]
|
||
dec edx
|
||
mov eax, [buffer]
|
||
mov [buffer_pos], eax
|
||
|
||
.prdt_fill:
|
||
cmp ecx, edx
|
||
jae .prdt_fill_end
|
||
|
||
mov ebx, [buffer_pos]
|
||
and ebx, 0xFFF
|
||
call get_pg_addr ; eax = phys addr
|
||
add eax, ebx
|
||
DEBUGF 1, " PHYS = 0x%x\n", eax
|
||
mov ebx, ecx
|
||
shl ebx, BSF sizeof.HBA_PRDT_ENTRY
|
||
add ebx, [cmdtable]
|
||
add ebx, HBA_CMD_TBL.prdt_entry ; now ebx - address of ecx'th prdt_entry
|
||
|
||
mov [ebx + HBA_PRDT_ENTRY.dba], eax
|
||
mov [ebx + HBA_PRDT_ENTRY.dbau], 0
|
||
and [ebx + HBA_PRDT_ENTRY.flags], not 0x3FFFFF ; zero out lower 22 bits, they used for byte count
|
||
or [ebx + HBA_PRDT_ENTRY.flags], 4096 - 1 ; reason why -1 see in spec on this field
|
||
; or [eax + HBA_CMD_TBL.prdt_entry + HBA_PRDT_ENTRY.flags], 1 shl 31 ; enable interrupt on completion
|
||
|
||
add [buffer_pos], 4096
|
||
sub [buffer_length], 4096
|
||
|
||
inc ecx
|
||
jmp .prdt_fill
|
||
.prdt_fill_end:
|
||
|
||
mov ebx, [buffer_pos]
|
||
and ebx, 0xFFF
|
||
call get_pg_addr ; eax = phys addr
|
||
add eax, ebx
|
||
DEBUGF 1, " PHYS. = 0x%x\n", eax
|
||
mov ebx, ecx
|
||
shl ebx, BSF sizeof.HBA_PRDT_ENTRY
|
||
add ebx, [cmdtable]
|
||
add ebx, HBA_CMD_TBL.prdt_entry ; now ebx - address of ecx'th prdt_entry
|
||
mov [ebx + HBA_PRDT_ENTRY.dba], eax
|
||
mov [ebx + HBA_PRDT_ENTRY.dbau], 0
|
||
and [ebx + HBA_PRDT_ENTRY.flags], not 0x3FFFFF ; zero out lower 22 bits, they used for byte count
|
||
mov eax, [buffer_length]
|
||
dec eax
|
||
DEBUGF 1, " DBC = %u\n", eax
|
||
or [ebx + HBA_PRDT_ENTRY.flags], eax ; reason why -1 see in spec on this field
|
||
; or [eax + HBA_CMD_TBL.prdt_entry + HBA_PRDT_ENTRY.flags], 1 shl 31 ; enable interrupt on completion
|
||
|
||
mov eax, [cmdtable]
|
||
mov byte [eax + HBA_CMD_TBL.cfis + FIS_REG_H2D.fis_type], FIS_TYPE_REG_H2D
|
||
movzx ebx, byte [eax + HBA_CMD_TBL.cfis + FIS_REG_H2D.flags]
|
||
bts ebx, bit_AHCI_H2D_FLAG_CMD ; Set Command bit in H2D FIS.
|
||
mov byte [eax + HBA_CMD_TBL.cfis + FIS_REG_H2D.flags], bl
|
||
|
||
mov byte [eax + HBA_CMD_TBL.cfis + FIS_REG_H2D.command], ATA_CMD_READ_DMA_EX
|
||
|
||
mov ebx, dword [startsector]
|
||
mov byte [eax + HBA_CMD_TBL.cfis + FIS_REG_H2D.lba0], bl
|
||
shr ebx, 8
|
||
mov byte [eax + HBA_CMD_TBL.cfis + FIS_REG_H2D.lba1], bl
|
||
shr ebx, 8
|
||
mov byte [eax + HBA_CMD_TBL.cfis + FIS_REG_H2D.lba2], bl
|
||
mov byte [eax + HBA_CMD_TBL.cfis + FIS_REG_H2D.device], 1 shl 6 ; LBA mode
|
||
shr ebx, 8
|
||
mov byte [eax + HBA_CMD_TBL.cfis + FIS_REG_H2D.lba3], bl
|
||
mov ebx, dword [startsector + 4]
|
||
mov byte [eax + HBA_CMD_TBL.cfis + FIS_REG_H2D.lba4], bl
|
||
shr ebx, 8
|
||
mov byte [eax + HBA_CMD_TBL.cfis + FIS_REG_H2D.lba5], bl
|
||
|
||
mov ebx, [numsectors]
|
||
mov byte [eax + HBA_CMD_TBL.cfis + FIS_REG_H2D.countl], bl
|
||
shr ebx, 8
|
||
mov byte [eax + HBA_CMD_TBL.cfis + FIS_REG_H2D.counth], bl
|
||
|
||
; Wait on previous command to complete, before issuing new command.
|
||
stdcall ahci_port_wait, edi, AHCI_PORT_TIMEOUT
|
||
|
||
mov eax, [cmdslot]
|
||
bts [edi + HBA_PORT.command_issue], eax ; Issue the command
|
||
|
||
; Wait for command completion
|
||
stdcall ahci_port_cmd_wait, edi, eax;, AHCI_PORT_CMD_TIMEOUT
|
||
|
||
DEBUGF 1, "sata_error register = 0x%x\n", [edi + HBA_PORT.sata_error]
|
||
|
||
DEBUGF 1, "reading completed\n"
|
||
|
||
xor ecx, ecx
|
||
mov esi, [buffer]
|
||
.print_data:
|
||
cmp ecx, 512
|
||
jae .end_print_data
|
||
|
||
mov al, byte [esi + ecx]
|
||
mov byte [tmpstr], al
|
||
mov byte [tmpstr + 1], 0
|
||
DEBUGF 1, "0x%x(%s) ", al:1, tmpstr
|
||
|
||
inc ecx
|
||
jmp .print_data
|
||
.end_print_data:
|
||
DEBUGF 1, "\n"
|
||
|
||
.ret:
|
||
mov ecx, ahci_mutex
|
||
call mutex_unlock
|
||
|
||
popad
|
||
xor eax, eax
|
||
ret
|
||
endp
|
||
tmpstr rb 16
|
||
|
||
; Start command engine
|
||
; in: eax - address of HBA_PORT structure
|
||
ahci_start_cmd:
|
||
.wait_cr: ; Wait until CR (bit15) is cleared
|
||
bt [eax + HBA_PORT.command], bit_AHCI_HBA_PxCMD_CR
|
||
jc .wait_cr
|
||
|
||
; Set FRE (bit4) and ST (bit0)
|
||
bts [eax + HBA_PORT.command], bit_AHCI_HBA_PxCMD_FRE
|
||
bts [eax + HBA_PORT.command], bit_AHCI_HBA_PxCMD_ST
|
||
; maybe here call ahci flush cmd ? TODO (see seakernel)
|
||
ret
|
||
|
||
; Stop command engine
|
||
; in: eax - address of HBA_PORT structure
|
||
ahci_stop_cmd:
|
||
btr [eax + HBA_PORT.command], bit_AHCI_HBA_PxCMD_ST ; Clear ST (bit0)
|
||
btr [eax + HBA_PORT.command], bit_AHCI_HBA_PxCMD_FRE ; Clear FRE (bit4)
|
||
.wait_fr_cr: ; Wait until FR (bit14), CR (bit15) are cleared
|
||
bt [eax + HBA_PORT.command], bit_AHCI_HBA_PxCMD_FR
|
||
jc .wait_fr_cr
|
||
bt [eax + HBA_PORT.command], bit_AHCI_HBA_PxCMD_CR
|
||
jc .wait_fr_cr
|
||
|
||
ret
|
||
|
||
; waits until the port is no longer busy before issuing a new command
|
||
; in: [port] - address of HBA_PORT structure
|
||
; [timeout] - timeout (in iterations)
|
||
; out: eax = 0 if success, 1 if timeout expired
|
||
proc ahci_port_wait stdcall, port: dword, timeout: dword
|
||
push ebx ecx
|
||
mov ebx, [port]
|
||
xor ecx, ecx
|
||
.wait:
|
||
cmp ecx, [timeout]
|
||
jae .wait_end
|
||
mov eax, [ebx + HBA_PORT.task_file_data]
|
||
and eax, ATA_DEV_BUSY or ATA_DEV_DRQ
|
||
test eax, eax
|
||
jz .wait_end
|
||
inc ecx
|
||
jmp .wait
|
||
.wait_end:
|
||
xor eax, eax
|
||
DEBUGF 1, "port wait counter = %u\n", ecx
|
||
cmp ecx, [timeout] ; if they equal it means port is hung
|
||
setz al
|
||
pop ecx ebx
|
||
ret
|
||
endp
|
||
|
||
|
||
; Wait for command completion
|
||
; in: [port] - address of HBA_PORT structure
|
||
; [cmdslot] - number of command slot
|
||
; out: eax = 0 if success, 1 if error
|
||
proc ahci_port_cmd_wait stdcall, port: dword, cmdslot: dword ;, timeout: dword
|
||
push ebx ecx edx
|
||
mov ebx, [port]
|
||
mov edx, [cmdslot]
|
||
xor eax, eax
|
||
xor ecx, ecx
|
||
.wait:
|
||
bt [ebx + HBA_PORT.command_issue], edx
|
||
jnc .wait_end
|
||
bt [ebx + HBA_PORT.interrupt_status], bit_AHCI_HBA_PxIS_TFES ; check for Task File Error
|
||
jc .error
|
||
inc ecx
|
||
jmp .wait
|
||
.wait_end:
|
||
DEBUGF 1, "port cmd wait counter = %u\n", ecx
|
||
bt [ebx + HBA_PORT.interrupt_status], bit_AHCI_HBA_PxIS_TFES ; check for Task File Error
|
||
jc .error
|
||
jmp .ret
|
||
.error:
|
||
mov eax, 1
|
||
.ret:
|
||
pop edx ecx ebx
|
||
ret
|
||
endp
|
||
|
||
; ; The commands may not take effect until the command
|
||
; ; register is read again by software, because reasons.
|
||
; ; in: eax - address of HBA_PORT structure
|
||
; ; out: eax - command register value
|
||
; ahci_flush_cmd:
|
||
; mov eax, [eax + HBA_PORT.command]
|
||
; ret
|
||
|
||
; ; Send command to port
|
||
; ; in: eax - address of HBA_PORT structure
|
||
; ; ebx - index of command slot
|
||
; ahci_send_cmd:
|
||
; push ecx
|
||
; mov [eax + HBA_PORT.interrupt_status], 0xFFFFFFFF
|
||
|
||
; mov cl, bl
|
||
; mov [eax + HBA_PORT.command_issue], 1
|
||
; shl [eax + HBA_PORT.command_issue], cl
|
||
|
||
; call ahci_flush_cmd
|
||
; pop ecx
|
||
; ret
|
||
|
||
; ---------------------------------------------------------------------------
|
||
; in: port - address of HBA_PORT structure
|
||
; portno - port index (0..31)
|
||
; pdata - address of PORT_DATA structure
|
||
proc ahci_port_rebase stdcall, port: dword, portno: dword, pdata: dword
|
||
locals
|
||
phys_page1 dd ?
|
||
virt_page1 dd ?
|
||
phys_page23 dd ?
|
||
virt_page23 dd ?
|
||
tmp dd ?
|
||
endl
|
||
|
||
pushad
|
||
|
||
DEBUGF 1, "Rebasing port %u\n", [portno]
|
||
|
||
mov eax, [port]
|
||
call ahci_stop_cmd
|
||
|
||
; Command list entry size = 32
|
||
; Command list entry maxim count = 32
|
||
; Command list maxim size = 32*32 = 1K per port
|
||
call alloc_page
|
||
mov [phys_page1], eax
|
||
|
||
stdcall map_io_mem, eax, 4096, PG_NOCACHE + PG_SWR ; map to virt memory so we can work with it
|
||
mov [virt_page1], eax
|
||
|
||
mov esi, [port]
|
||
mov ebx, [phys_page1]
|
||
mov [esi + HBA_PORT.command_list_base_l], ebx ; set the command list base
|
||
mov [esi + HBA_PORT.command_list_base_h], 0 ; zero upper 32 bits of addr cause we are 32 bit os
|
||
|
||
mov edi, [pdata]
|
||
mov ebx, [virt_page1]
|
||
mov [edi + PORT_DATA.clb], ebx ; set pdata->clb
|
||
|
||
mov eax, [port]
|
||
mov [edi + PORT_DATA.port], eax ; set pdata->port
|
||
mov eax, [portno] ; set pdata->portno
|
||
mov [edi + PORT_DATA.portno], eax
|
||
|
||
stdcall _memset, ebx, 0, 1024 ; zero out the command list
|
||
|
||
; FIS entry size = 256 bytes per port
|
||
mov eax, [phys_page1]
|
||
add eax, 1024
|
||
mov [esi + HBA_PORT.fis_base_l], eax
|
||
mov [esi + HBA_PORT.fis_base_h], 0
|
||
|
||
mov eax, [virt_page1]
|
||
add eax, 1024
|
||
mov [edi + PORT_DATA.fb], eax ; set pdata->fb
|
||
stdcall _memset, eax, 0, 256 ; zero out
|
||
|
||
stdcall alloc_pages, 2
|
||
mov [phys_page23], eax
|
||
stdcall map_io_mem, eax, 2*4096, PG_NOCACHE + PG_SWR
|
||
mov [virt_page23], eax
|
||
|
||
; Command table size = 256*32 = 8K per port
|
||
mov edx, [edi + PORT_DATA.clb] ; cmdheader array base
|
||
xor ecx, ecx
|
||
|
||
.for1:
|
||
cmp ecx, 32
|
||
jae .for1_end
|
||
|
||
mov ebx, ecx
|
||
shl ebx, BSF sizeof.HBA_CMD_HDR
|
||
add ebx, edx ; ebx = cmdheader[ecx]
|
||
|
||
mov [ebx + HBA_CMD_HDR.prdtl], 8 ; 8 prdt entries per command table
|
||
|
||
; 256 bytes per command table, 64+16+48+16*8
|
||
|
||
push edx
|
||
|
||
; cmdheader[ecx].ctba = phys_page23 + ecx*256
|
||
mov [ebx + HBA_CMD_HDR.ctba], ecx
|
||
shl [ebx + HBA_CMD_HDR.ctba], BSF 256 ; *= 256
|
||
mov eax, [ebx + HBA_CMD_HDR.ctba]
|
||
mov edx, [phys_page23]
|
||
add [ebx + HBA_CMD_HDR.ctba], edx
|
||
|
||
add eax, [virt_page23]
|
||
mov [tmp], eax ; tmp = virt_page23 + ecx*256
|
||
lea eax, [ecx*4 + edi + PORT_DATA.ctba_arr] ; eax = pdata->ctba_arr[ecx]
|
||
mov edx, [tmp]
|
||
mov [eax], edx ; pdata->ctba_arr[ecx] = virt_page23 + ecx*256
|
||
|
||
pop edx
|
||
|
||
mov [ebx + HBA_CMD_HDR.ctbau], 0
|
||
stdcall _memset, [eax], 0, 256 ; zero out
|
||
|
||
inc ecx
|
||
jmp .for1
|
||
.for1_end:
|
||
|
||
mov eax, [port]
|
||
call ahci_start_cmd
|
||
|
||
DEBUGF 1, "End rebasing port %u\n", [portno]
|
||
popad
|
||
ret
|
||
endp
|
||
|
||
; ----------------------------------------------------------- ; TODO check
|
||
; Find a free command list slot
|
||
; in: eax - address of HBA_PORT structure
|
||
; out: eax - if not found -1, else slot index
|
||
ahci_find_cmdslot:
|
||
push ebx ecx edx esi
|
||
; If not set in SACT and CI, the slot is free
|
||
mov ebx, [eax + HBA_PORT.sata_active]
|
||
or ebx, [eax + HBA_PORT.command_issue] ; ebx = slots
|
||
|
||
mov esi, [ahci_controller + AHCI_DATA.abar]
|
||
mov edx, [esi + HBA_MEM.cap]
|
||
shr edx, 8
|
||
and edx, 0xf
|
||
; DEBUGF 1, "Number of Command Slots on each port = %u\n", edx
|
||
xor ecx, ecx
|
||
.for1:
|
||
cmp ecx, edx
|
||
jae .for1_end
|
||
|
||
; if ((slots&1) == 0) return i;
|
||
bt ebx, 0
|
||
jc .cont1
|
||
|
||
mov eax, ecx
|
||
jmp .ret
|
||
|
||
.cont1:
|
||
shr ebx, 1
|
||
inc ecx
|
||
jmp .for1
|
||
.for1_end:
|
||
DEBUGF 1, "Cannot find free command list entry\n"
|
||
mov eax, -1
|
||
.ret:
|
||
pop esi edx ecx ebx
|
||
ret
|
||
|
||
|
||
proc _memset stdcall, dest:dword, val:byte, cnt:dword ; doesnt clobber any registers
|
||
;DEBUGF DBG_INFO, "memset(%x, %u, %u)\n", [dest], [val], [cnt]
|
||
push eax ecx edi
|
||
mov edi, dword [dest]
|
||
mov al, byte [val]
|
||
mov ecx, dword [cnt]
|
||
rep stosb
|
||
pop edi ecx eax
|
||
ret
|
||
endp
|
||
|
||
; Swaps byte order in words
|
||
; base - address of first word
|
||
; len - how many words to swap bytes in
|
||
; doesnt clobber any registers
|
||
proc swap_bytes_in_words stdcall, base: dword, len: dword
|
||
push eax ebx ecx
|
||
xor ecx, ecx
|
||
mov ebx, [base]
|
||
.loop:
|
||
cmp ecx, [len]
|
||
jae .loop_end
|
||
mov ax, word [ebx + ecx*2]
|
||
xchg ah, al
|
||
mov word [ebx + ecx*2], ax
|
||
inc ecx
|
||
jmp .loop
|
||
.loop_end:
|
||
pop ecx ebx eax
|
||
ret
|
||
endp
|