forked from KolibriOS/kolibrios
731 lines
20 KiB
PHP
731 lines
20 KiB
PHP
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
|
;; ;;
|
|
;; Copyright (C) KolibriOS team 2004-2011. All rights reserved. ;;
|
|
;; Distributed under terms of the GNU General Public License ;;
|
|
;; ;;
|
|
;; ;;
|
|
;; PCI32.INC ;;
|
|
;; ;;
|
|
;; 32 bit PCI driver code ;;
|
|
;; ;;
|
|
;; Version 0.3 April 9, 2007 ;;
|
|
;; Version 0.2 December 21st, 2002 ;;
|
|
;; ;;
|
|
;; Author: Victor Prodan, victorprodan@yahoo.com ;;
|
|
;; Mihailov Ilia, ghost.nsk@gmail.com ;;
|
|
;; Credits: ;;
|
|
;; Ralf Brown ;;
|
|
;; Mike Hibbett, mikeh@oceanfree.net ;;
|
|
;; ;;
|
|
;; See file COPYING for details ;;
|
|
;; ;;
|
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
|
|
|
$Revision$
|
|
|
|
;***************************************************************************
|
|
; Function
|
|
; pci_api:
|
|
;
|
|
; Description
|
|
; entry point for system PCI calls
|
|
;***************************************************************************
|
|
;mmio_pci_addr equ 0x400 ; set actual PCI address here to activate user-MMIO
|
|
|
|
iglobal
|
|
align 4
|
|
f62call:
|
|
dd pci_fn_0
|
|
dd pci_fn_1
|
|
dd pci_fn_2
|
|
dd pci_service_not_supported ;3
|
|
dd pci_read_reg ;4 byte
|
|
dd pci_read_reg ;5 word
|
|
dd pci_read_reg ;6 dword
|
|
dd pci_service_not_supported ;7
|
|
dd pci_write_reg ;8 byte
|
|
dd pci_write_reg ;9 word
|
|
dd pci_write_reg ;10 dword
|
|
if defined mmio_pci_addr
|
|
dd pci_mmio_init ;11
|
|
dd pci_mmio_map ;12
|
|
dd pci_mmio_unmap ;13
|
|
end if
|
|
|
|
endg
|
|
|
|
align 4
|
|
|
|
pci_api:
|
|
|
|
;cross
|
|
mov eax, ebx
|
|
mov ebx, ecx
|
|
mov ecx, edx
|
|
|
|
cmp [pci_access_enabled], 1
|
|
jne pci_service_not_supported
|
|
|
|
movzx edx, al
|
|
|
|
if defined mmio_pci_addr
|
|
cmp al, 13
|
|
ja pci_service_not_supported
|
|
else
|
|
cmp al, 10
|
|
ja pci_service_not_supported
|
|
end if
|
|
|
|
call dword [f62call+edx*4]
|
|
mov dword [esp+32], eax
|
|
ret
|
|
|
|
|
|
align 4
|
|
pci_api_drv:
|
|
|
|
cmp [pci_access_enabled], 1
|
|
jne .fail
|
|
|
|
cmp eax, 2
|
|
ja .fail
|
|
|
|
jmp dword [f62call+eax*4]
|
|
|
|
.fail:
|
|
or eax, -1
|
|
ret
|
|
|
|
|
|
;; ============================================
|
|
|
|
pci_fn_0:
|
|
; PCI function 0: get pci version (AH.AL)
|
|
movzx eax, word [BOOT_VARS+0x9022]
|
|
ret
|
|
|
|
pci_fn_1:
|
|
; PCI function 1: get last bus in AL
|
|
mov al, [BOOT_VARS+0x9021]
|
|
ret
|
|
|
|
pci_fn_2:
|
|
; PCI function 2: get pci access mechanism
|
|
mov al, [BOOT_VARS+0x9020]
|
|
ret
|
|
|
|
pci_service_not_supported:
|
|
or eax, -1
|
|
mov dword [esp+32], eax
|
|
ret
|
|
|
|
;***************************************************************************
|
|
; Function
|
|
; pci_make_config_cmd
|
|
;
|
|
; Description
|
|
; creates a command dword for use with the PCI bus
|
|
; bus # in ah
|
|
; device+func in bh (dddddfff)
|
|
; register in bl
|
|
;
|
|
; command dword returned in eax ( 10000000 bbbbbbbb dddddfff rrrrrr00 )
|
|
;***************************************************************************
|
|
|
|
align 4
|
|
|
|
pci_make_config_cmd:
|
|
shl eax, 8 ; move bus to bits 16-23
|
|
mov ax, bx ; combine all
|
|
and eax, 0xffffff
|
|
or eax, 0x80000000
|
|
ret
|
|
|
|
;***************************************************************************
|
|
; Function
|
|
; pci_read_reg:
|
|
;
|
|
; Description
|
|
; read a register from the PCI config space into EAX/AX/AL
|
|
; IN: ah=bus,device+func=bh,register address=bl
|
|
; number of bytes to read (1,2,4) coded into AL, bits 0-1
|
|
; (0 - byte, 1 - word, 2 - dword)
|
|
;***************************************************************************
|
|
|
|
align 4
|
|
|
|
pci_read_reg:
|
|
push ebx esi
|
|
cmp byte [BOOT_VARS+0x9020], 2;what mechanism will we use?
|
|
je pci_read_reg_2
|
|
|
|
; mechanism 1
|
|
mov esi, eax ; save register size into ESI
|
|
and esi, 3
|
|
|
|
call pci_make_config_cmd
|
|
mov ebx, eax
|
|
; get current state
|
|
mov dx, 0xcf8
|
|
in eax, dx
|
|
push eax
|
|
; set up addressing to config data
|
|
mov eax, ebx
|
|
and al, 0xfc; make address dword-aligned
|
|
out dx, eax
|
|
; get requested DWORD of config data
|
|
mov dl, 0xfc
|
|
and bl, 3
|
|
or dl, bl ; add to port address first 2 bits of register address
|
|
|
|
or esi, esi
|
|
jz pci_read_byte1
|
|
cmp esi, 1
|
|
jz pci_read_word1
|
|
cmp esi, 2
|
|
jz pci_read_dword1
|
|
jmp pci_fin_read1
|
|
|
|
pci_read_byte1:
|
|
in al, dx
|
|
jmp pci_fin_read1
|
|
pci_read_word1:
|
|
in ax, dx
|
|
jmp pci_fin_read1
|
|
pci_read_dword1:
|
|
in eax, dx
|
|
jmp pci_fin_read1
|
|
pci_fin_read1:
|
|
; restore configuration control
|
|
xchg eax, [esp]
|
|
mov dx, 0xcf8
|
|
out dx, eax
|
|
|
|
pop eax
|
|
pop esi ebx
|
|
ret
|
|
pci_read_reg_2:
|
|
|
|
test bh, 128 ;mech#2 only supports 16 devices per bus
|
|
jnz pci_read_reg_err
|
|
|
|
mov esi, eax ; save register size into ESI
|
|
and esi, 3
|
|
|
|
push eax
|
|
;store current state of config space
|
|
mov dx, 0xcf8
|
|
in al, dx
|
|
mov ah, al
|
|
mov dl, 0xfa
|
|
in al, dx
|
|
|
|
xchg eax, [esp]
|
|
; out 0xcfa,bus
|
|
mov al, ah
|
|
out dx, al
|
|
; out 0xcf8,0x80
|
|
mov dl, 0xf8
|
|
mov al, 0x80
|
|
out dx, al
|
|
; compute addr
|
|
shr bh, 3; func is ignored in mechanism 2
|
|
or bh, 0xc0
|
|
mov dx, bx
|
|
|
|
or esi, esi
|
|
jz pci_read_byte2
|
|
cmp esi, 1
|
|
jz pci_read_word2
|
|
cmp esi, 2
|
|
jz pci_read_dword2
|
|
jmp pci_fin_read2
|
|
|
|
pci_read_byte2:
|
|
in al, dx
|
|
jmp pci_fin_read2
|
|
pci_read_word2:
|
|
in ax, dx
|
|
jmp pci_fin_read2
|
|
pci_read_dword2:
|
|
in eax, dx
|
|
; jmp pci_fin_read2
|
|
pci_fin_read2:
|
|
|
|
; restore configuration space
|
|
xchg eax, [esp]
|
|
mov dx, 0xcfa
|
|
out dx, al
|
|
mov dl, 0xf8
|
|
mov al, ah
|
|
out dx, al
|
|
|
|
pop eax
|
|
pop esi ebx
|
|
ret
|
|
|
|
pci_read_reg_err:
|
|
xor eax, eax
|
|
dec eax
|
|
pop esi ebx
|
|
ret
|
|
|
|
|
|
;***************************************************************************
|
|
; Function
|
|
; pci_write_reg:
|
|
;
|
|
; Description
|
|
; write a register from ECX/CX/CL into the PCI config space
|
|
; IN: ah=bus,device+func=bh,register address (dword aligned)=bl,
|
|
; value to write in ecx
|
|
; number of bytes to write (1,2,4) coded into AL, bits 0-1
|
|
; (0 - byte, 1 - word, 2 - dword)
|
|
;***************************************************************************
|
|
|
|
align 4
|
|
|
|
pci_write_reg:
|
|
push esi ebx
|
|
cmp byte [BOOT_VARS+0x9020], 2;what mechanism will we use?
|
|
je pci_write_reg_2
|
|
|
|
; mechanism 1
|
|
mov esi, eax ; save register size into ESI
|
|
and esi, 3
|
|
|
|
call pci_make_config_cmd
|
|
mov ebx, eax
|
|
; get current state into ecx
|
|
mov dx, 0xcf8
|
|
in eax, dx
|
|
push eax
|
|
; set up addressing to config data
|
|
mov eax, ebx
|
|
and al, 0xfc; make address dword-aligned
|
|
out dx, eax
|
|
; write DWORD of config data
|
|
mov dl, 0xfc
|
|
and bl, 3
|
|
or dl, bl
|
|
mov eax, ecx
|
|
|
|
or esi, esi
|
|
jz pci_write_byte1
|
|
cmp esi, 1
|
|
jz pci_write_word1
|
|
cmp esi, 2
|
|
jz pci_write_dword1
|
|
jmp pci_fin_write1
|
|
|
|
pci_write_byte1:
|
|
out dx, al
|
|
jmp pci_fin_write1
|
|
pci_write_word1:
|
|
out dx, ax
|
|
jmp pci_fin_write1
|
|
pci_write_dword1:
|
|
out dx, eax
|
|
jmp pci_fin_write1
|
|
pci_fin_write1:
|
|
|
|
; restore configuration control
|
|
pop eax
|
|
mov dl, 0xf8
|
|
out dx, eax
|
|
|
|
xor eax, eax
|
|
pop ebx esi
|
|
|
|
ret
|
|
pci_write_reg_2:
|
|
|
|
test bh, 128 ;mech#2 only supports 16 devices per bus
|
|
jnz pci_write_reg_err
|
|
|
|
|
|
mov esi, eax ; save register size into ESI
|
|
and esi, 3
|
|
|
|
push eax
|
|
;store current state of config space
|
|
mov dx, 0xcf8
|
|
in al, dx
|
|
mov ah, al
|
|
mov dl, 0xfa
|
|
in al, dx
|
|
xchg eax, [esp]
|
|
; out 0xcfa,bus
|
|
mov al, ah
|
|
out dx, al
|
|
; out 0xcf8,0x80
|
|
mov dl, 0xf8
|
|
mov al, 0x80
|
|
out dx, al
|
|
; compute addr
|
|
shr bh, 3; func is ignored in mechanism 2
|
|
or bh, 0xc0
|
|
mov dx, bx
|
|
; write register
|
|
mov eax, ecx
|
|
|
|
or esi, esi
|
|
jz pci_write_byte2
|
|
cmp esi, 1
|
|
jz pci_write_word2
|
|
cmp esi, 2
|
|
jz pci_write_dword2
|
|
jmp pci_fin_write2
|
|
|
|
pci_write_byte2:
|
|
out dx, al
|
|
jmp pci_fin_write2
|
|
pci_write_word2:
|
|
out dx, ax
|
|
jmp pci_fin_write2
|
|
pci_write_dword2:
|
|
out dx, eax
|
|
jmp pci_fin_write2
|
|
pci_fin_write2:
|
|
; restore configuration space
|
|
pop eax
|
|
mov dx, 0xcfa
|
|
out dx, al
|
|
mov dl, 0xf8
|
|
mov al, ah
|
|
out dx, al
|
|
|
|
xor eax, eax
|
|
pop ebx esi
|
|
ret
|
|
|
|
pci_write_reg_err:
|
|
xor eax, eax
|
|
dec eax
|
|
pop ebx esi
|
|
ret
|
|
|
|
if defined mmio_pci_addr ; must be set above
|
|
;***************************************************************************
|
|
; Function
|
|
; pci_mmio_init
|
|
;
|
|
; Description
|
|
; IN: bx = device's PCI bus address (bbbbbbbbdddddfff)
|
|
; Returns eax = user heap space available (bytes)
|
|
; Error codes
|
|
; eax = -1 : PCI user access blocked,
|
|
; eax = -2 : device not registered for uMMIO service
|
|
; eax = -3 : user heap initialization failure
|
|
;***************************************************************************
|
|
pci_mmio_init:
|
|
cmp bx, mmio_pci_addr
|
|
jz @f
|
|
mov eax, -2
|
|
ret
|
|
@@:
|
|
call init_heap ; (if not initialized yet)
|
|
or eax, eax
|
|
jz @f
|
|
ret
|
|
@@:
|
|
mov eax, -3
|
|
ret
|
|
|
|
|
|
;***************************************************************************
|
|
; Function
|
|
; pci_mmio_map
|
|
;
|
|
; Description
|
|
; maps a block of PCI memory to user-accessible linear address
|
|
;
|
|
; WARNING! This VERY EXPERIMENTAL service is for one chosen PCI device only!
|
|
; The target device address should be set in kernel var mmio_pci_addr
|
|
;
|
|
; IN: ah = BAR#;
|
|
; IN: ebx = block size (bytes);
|
|
; IN: ecx = offset in MMIO block (in 4K-pages, to avoid misaligned pages);
|
|
;
|
|
; Returns eax = MMIO block's linear address in the userspace (if no error)
|
|
;
|
|
;
|
|
; Error codes
|
|
; eax = -1 : user access to PCI blocked,
|
|
; eax = -2 : an invalid BAR register referred
|
|
; eax = -3 : no i/o space on that BAR
|
|
; eax = -4 : a port i/o BAR register referred
|
|
; eax = -5 : dynamic userspace allocation problem
|
|
;***************************************************************************
|
|
|
|
pci_mmio_map:
|
|
and edx, 0x0ffff
|
|
cmp ah, 6
|
|
jc .bar_0_5
|
|
jz .bar_rom
|
|
mov eax, -2
|
|
ret
|
|
.bar_rom:
|
|
mov ah, 8 ; bar6 = Expansion ROM base address
|
|
.bar_0_5:
|
|
push ecx
|
|
add ebx, 4095
|
|
and ebx, -4096
|
|
push ebx
|
|
mov bl, ah ; bl = BAR# (0..5), however bl=8 for BAR6
|
|
shl bl, 1
|
|
shl bl, 1
|
|
add bl, 0x10; now bl = BAR offset in PCI config. space
|
|
mov ax, mmio_pci_addr
|
|
mov bh, al ; bh = dddddfff
|
|
mov al, 2 ; al : DW to read
|
|
call pci_read_reg
|
|
or eax, eax
|
|
jnz @f
|
|
mov eax, -3 ; empty I/O space
|
|
jmp mmio_ret_fail
|
|
@@:
|
|
test eax, 1
|
|
jz @f
|
|
mov eax, -4 ; damned ports (not MMIO space)
|
|
jmp mmio_ret_fail
|
|
@@:
|
|
pop ecx ; ecx = block size, bytes (expanded to whole page)
|
|
mov ebx, ecx; user_alloc destroys eax, ecx, edx, but saves ebx
|
|
and eax, 0xFFFFFFF0
|
|
push eax ; store MMIO physical address + keep 2DWords in the stack
|
|
stdcall user_alloc, ecx
|
|
or eax, eax
|
|
jnz mmio_map_over
|
|
mov eax, -5 ; problem with page allocation
|
|
|
|
mmio_ret_fail:
|
|
pop ecx
|
|
pop edx
|
|
ret
|
|
|
|
mmio_map_over:
|
|
mov ecx, ebx; ecx = size (bytes, expanded to whole page)
|
|
shr ecx, 12 ; ecx = number of pages
|
|
mov ebx, eax; ebx = linear address
|
|
pop eax ; eax = MMIO start
|
|
pop edx ; edx = MMIO shift (pages)
|
|
shl edx, 12 ; edx = MMIO shift (bytes)
|
|
add eax, edx; eax = uMMIO physical address
|
|
or eax, PG_SHARED
|
|
or eax, PG_UW
|
|
or eax, PG_NOCACHE
|
|
mov edi, ebx
|
|
call commit_pages
|
|
mov eax, edi
|
|
ret
|
|
|
|
;***************************************************************************
|
|
; Function
|
|
; pci_mmio_unmap_page
|
|
;
|
|
; Description
|
|
; unmaps the linear space previously tied to a PCI memory block
|
|
;
|
|
; IN: ebx = linear address of space previously allocated by pci_mmio_map
|
|
; returns eax = 1 if successfully unmapped
|
|
;
|
|
; Error codes
|
|
; eax = -1 if no user PCI access allowed,
|
|
; eax = 0 if unmapping failed
|
|
;***************************************************************************
|
|
|
|
pci_mmio_unmap:
|
|
stdcall user_free, ebx
|
|
ret
|
|
|
|
end if
|
|
|
|
;-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
|
|
uglobal
|
|
align 4
|
|
; VendID (2), DevID (2), Revision = 0 (1), Class Code (3), FNum (1), Bus (1)
|
|
pci_emu_dat:
|
|
times 30*10 db 0
|
|
endg
|
|
;-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
|
|
align 4
|
|
sys_pcibios:
|
|
cmp [pci_access_enabled], 1
|
|
jne .unsupported_func
|
|
cmp [pci_bios_entry], 0
|
|
jz .emulate_bios
|
|
|
|
push ds
|
|
mov ax, pci_data_sel
|
|
mov ds, ax
|
|
mov eax, ebp
|
|
mov ah, 0B1h
|
|
call pword [cs:pci_bios_entry]
|
|
pop ds
|
|
|
|
jmp .return
|
|
;-=-=-=-=-=-=-=-=
|
|
.emulate_bios:
|
|
cmp ebp, 1 ; PCI_FUNCTION_ID
|
|
jnz .not_PCI_BIOS_PRESENT
|
|
mov edx, 'PCI '
|
|
mov al, [BOOT_VARS + 0x9020]
|
|
mov bx, [BOOT_VARS + 0x9022]
|
|
mov cl, [BOOT_VARS + 0x9021]
|
|
xor ah, ah
|
|
jmp .return_abcd
|
|
|
|
.not_PCI_BIOS_PRESENT:
|
|
cmp ebp, 2 ; FIND_PCI_DEVICE
|
|
jne .not_FIND_PCI_DEVICE
|
|
mov ebx, pci_emu_dat
|
|
..nxt:
|
|
cmp [ebx], dx
|
|
jne ..no
|
|
cmp [ebx + 2], cx
|
|
jne ..no
|
|
dec si
|
|
jns ..no
|
|
mov bx, [ebx + 4]
|
|
xor ah, ah
|
|
jmp .return_ab
|
|
..no:
|
|
cmp word[ebx], 0
|
|
je ..dev_not_found
|
|
add ebx, 10
|
|
jmp ..nxt
|
|
..dev_not_found:
|
|
mov ah, 0x86 ; DEVICE_NOT_FOUND
|
|
jmp .return_a
|
|
|
|
.not_FIND_PCI_DEVICE:
|
|
cmp ebp, 3 ; FIND_PCI_CLASS_CODE
|
|
jne .not_FIND_PCI_CLASS_CODE
|
|
mov esi, pci_emu_dat
|
|
shl ecx, 8
|
|
..nxt2:
|
|
cmp [esi], ecx
|
|
jne ..no2
|
|
mov bx, [esi]
|
|
xor ah, ah
|
|
jmp .return_ab
|
|
..no2:
|
|
cmp dword[esi], 0
|
|
je ..dev_not_found
|
|
add esi, 10
|
|
jmp ..nxt2
|
|
|
|
.not_FIND_PCI_CLASS_CODE:
|
|
cmp ebp, 8 ; READ_CONFIG_*
|
|
jb .not_READ_CONFIG
|
|
cmp ebp, 0x0A
|
|
ja .not_READ_CONFIG
|
|
mov eax, ebp
|
|
mov ah, bh
|
|
mov edx, edi
|
|
mov bh, bl
|
|
mov bl, dl
|
|
call pci_read_reg
|
|
mov ecx, eax
|
|
xor ah, ah ; SUCCESSFUL
|
|
jmp .return_abc
|
|
.not_READ_CONFIG:
|
|
cmp ebp, 0x0B ; WRITE_CONFIG_*
|
|
jb .not_WRITE_CONFIG
|
|
cmp ebp, 0x0D
|
|
ja .not_WRITE_CONFIG
|
|
lea eax, [ebp+1]
|
|
mov ah, bh
|
|
mov edx, edi
|
|
mov bh, bl
|
|
mov bl, dl
|
|
call pci_write_reg
|
|
xor ah, ah ; SUCCESSFUL
|
|
jmp .return_abc
|
|
.not_WRITE_CONFIG:
|
|
.unsupported_func:
|
|
mov ah, 0x81 ; FUNC_NOT_SUPPORTED
|
|
.return:
|
|
mov dword[esp + 4 ], edi
|
|
mov dword[esp + 8], esi
|
|
.return_abcd:
|
|
mov dword[esp + 24], edx
|
|
.return_abc:
|
|
mov dword[esp + 28], ecx
|
|
.return_ab:
|
|
mov dword[esp + 20], ebx
|
|
.return_a:
|
|
mov dword[esp + 32], eax
|
|
ret
|
|
|
|
proc pci_enum
|
|
push ebp
|
|
mov ebp, esp
|
|
push 0
|
|
virtual at ebp-4
|
|
.devfn db ?
|
|
.bus db ?
|
|
end virtual
|
|
.loop:
|
|
mov ah, [.bus]
|
|
mov al, 2
|
|
mov bh, [.devfn]
|
|
mov bl, 0
|
|
call pci_read_reg
|
|
cmp eax, 0xFFFFFFFF
|
|
jnz .has_device
|
|
test byte [.devfn], 7
|
|
jnz .next_func
|
|
jmp .no_device
|
|
.has_device:
|
|
push eax
|
|
movi eax, sizeof.PCIDEV
|
|
call malloc
|
|
pop ecx
|
|
test eax, eax
|
|
jz .nomemory
|
|
mov edi, eax
|
|
mov [edi+PCIDEV.vendor_device_id], ecx
|
|
mov eax, pcidev_list
|
|
mov ecx, [eax+PCIDEV.bk]
|
|
mov [edi+PCIDEV.bk], ecx
|
|
mov [edi+PCIDEV.fd], eax
|
|
mov [ecx+PCIDEV.fd], edi
|
|
mov [eax+PCIDEV.bk], edi
|
|
mov eax, dword [.devfn]
|
|
mov dword [edi+PCIDEV.devfn], eax
|
|
mov dword [edi+PCIDEV.owner], 0
|
|
mov bh, al
|
|
mov al, 2
|
|
mov bl, 8
|
|
call pci_read_reg
|
|
shr eax, 8
|
|
mov [edi+PCIDEV.class], eax
|
|
test byte [.devfn], 7
|
|
jnz .next_func
|
|
mov ah, [.bus]
|
|
mov al, 0
|
|
mov bh, [.devfn]
|
|
mov bl, 0Eh
|
|
call pci_read_reg
|
|
test al, al
|
|
js .next_func
|
|
.no_device:
|
|
or byte [.devfn], 7
|
|
.next_func:
|
|
inc dword [.devfn]
|
|
mov ah, [.bus]
|
|
cmp ah, [BOOT_VARS+0x9021]
|
|
jbe .loop
|
|
.nomemory:
|
|
leave
|
|
ret
|
|
endp
|
|
|
|
; Export for drivers. Just returns the pointer to the pci-devices list.
|
|
proc get_pcidev_list
|
|
mov eax, pcidev_list
|
|
ret
|
|
endp
|