XenOn/kolibrios-fun
1
1
Fork 0
forked from KolibriOS/kolibrios
Code Pull Requests Wiki Activity
a6c8d276c3
kolibrios-fun/kernel/trunk/network/eth_drv/drivers/i8255x.inc
hidnplayr 853d0ada7d John's ethernet stack updates 
NEW subfunction 52-17

ftp://hidden-player.no-ip.com:2100/fn52-sub17.txt

git-svn-id: svn://kolibrios.org@261 a494cfbc-eb01-0410-851d-a64ba20cac60
2007-01-06 01:15:21 +00:00

739 lines
18 KiB
PHP
Raw Blame History

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; I8255X.INC ;;
;; ;;
;; Ethernet driver for Menuet OS ;;
;; ;;
;; Version 0.3 11 August 2003 ;;
;; ;;
;; This driver is based on the eepro100 driver from ;;
;; the etherboot 5.0.6 project. The copyright statement is ;;
;; ;;
;; GNU GENERAL PUBLIC LICENSE ;;
;; Version 2, June 1991 ;;
;; ;;
;; remaining parts Copyright 2002 Mike Hibbett, ;;
;; mikeh@oceanfree.net ;;
;; ;;
;; See file COPYING for details ;;
;; ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;********************************************************************
; Interface
; I8255x_reset
; I8255x_probe
; I8255x_poll
; I8255x_transmit
;
; These functions are referenced in ethernet.inc
;
;********************************************************************
rxfd_status equ eth_data_start
rxfd_command equ eth_data_start + 2
rxfd_link equ eth_data_start + 4
rxfd_rx_buf_addr equ eth_data_start + 8
rxfd_count equ eth_data_start + 12
rxfd_size equ eth_data_start + 14
rxfd_packet equ eth_data_start + 16
uglobal
eeprom_data: times 16 dd 0
align 4
lstats:
tx_good_frames: dd 0
tx_coll16_errs: dd 0
tx_late_colls: dd 0
tx_underruns: dd 0
tx_lost_carrier: dd 0
tx_deferred: dd 0
tx_one_colls: dd 0
tx_multi_colls: dd 0
tx_total_colls: dd 0
rx_good_frames: dd 0
rx_crc_errs: dd 0
rx_align_errs: dd 0
rx_resource_errs: dd 0
rx_overrun_errs: dd 0
rx_colls_errs: dd 0
rx_runt_errs: dd 0
done_marker: dd 0
align 4
confcmd:
confcmd_status: dw 0
confcmd_command: dw 0
confcmd_link: dd 0
endg
iglobal
confcmd_data: db 22, 0x08, 0, 0, 0, 0x80, 0x32, 0x03, 1
db 0, 0x2e, 0, 0x60, 0, 0xf2, 0x48, 0, 0x40, 0xf2
db 0x80, 0x3f, 0x05
endg
uglobal
align 4
txfd:
txfd_status: dw 0
txfd_command: dw 0
txfd_link: dd 0
txfd_tx_desc_addr: dd 0
txfd_count: dd 0
txfd_tx_buf_addr0: dd 0
txfd_tx_buf_size0: dd 0
txfd_tx_buf_addr1: dd 0
txfd_tx_buf_size1: dd 0
align 4
hdr:
hdr_dst_addr: times 6 db 0
hdr_src_addr: times 6 db 0
hdr_type: dw 0
endg
;***************************************************************************
; Function
; wait_for_cmd_done
;
; Description
; waits for the hardware to complete a command
; port address in edx
;
; al destroyed
;***************************************************************************
wait_for_cmd_done:
in al, dx
cmp al, 0
jne wait_for_cmd_done
ret
;***************************************************************************
; Function
; mdio_read
;
; Description
; This probably reads a register in the "physical media interface chip"
; Phy_id in ebx
; location in ecx
;
; Data returned in eax
;
;***************************************************************************
mdio_read:
mov edx, [io_addr]
add edx, 16 ; SCBCtrlMDI
mov eax, 0x08000000
shl ecx, 16
or eax, ecx
shl ebx, 21
or eax, ebx
out dx, eax
mrlp:
call delay_us
in eax, dx
mov ecx, eax
and ecx, 0x10000000
jz mrlp
and eax, 0xffff
ret
;***************************************************************************
; Function
; mdio_write
;
; Description
; This probably writes a register in the "physical media interface chip"
; Phy_id in ebx
; location in ecx
; data in edx
; Data returned in eax
;
;***************************************************************************
mdio_write:
mov eax, 0x04000000
shl ecx, 16
or eax, ecx
shl ebx, 21
or eax, ebx
or eax, edx
mov edx, [io_addr]
add edx, 16 ; SCBCtrlMDI
out dx, eax
mwlp:
call delay_us
in eax, dx
mov ecx, eax
and ecx, 0x10000000
jz mwlp
and eax, 0xffff
ret
;/***********************************************************************/
;/* I82557 related defines */
;/***********************************************************************/
; Serial EEPROM section.
; A "bit" grungy, but we work our way through bit-by-bit :->.
; EEPROM_Ctrl bits.
EE_SHIFT_CLK equ 0x01 ; EEPROM shift clock.
EE_CS equ 0x02 ; EEPROM chip select.
EE_DATA_WRITE equ 0x04 ; EEPROM chip data in.
EE_DATA_READ equ 0x08 ; EEPROM chip data out.
EE_WRITE_0 equ 0x4802
EE_WRITE_1 equ 0x4806
EE_ENB equ 0x4802
; The EEPROM commands include the alway-set leading bit.
EE_READ_CMD equ 6
; The SCB accepts the following controls for the Tx and Rx units:
CU_START equ 0x0010
CU_RESUME equ 0x0020
CU_STATSADDR equ 0x0040
CU_SHOWSTATS equ 0x0050 ; Dump statistics counters.
CU_CMD_BASE equ 0x0060 ; Base address to add to add CU commands.
CU_DUMPSTATS equ 0x0070 ; Dump then reset stats counters.
RX_START equ 0x0001
RX_RESUME equ 0x0002
RX_ABORT equ 0x0004
RX_ADDR_LOAD equ 0x0006
RX_RESUMENR equ 0x0007
INT_MASK equ 0x0100
DRVR_INT equ 0x0200 ; Driver generated interrupt.
;***************************************************************************
; Function
; do_eeprom_cmd
;
; Description
; writes a cmd to the ethernet cards eeprom, by bit bashing
; cmd in ebx
; cmd length in ecx
; return in eax
;***************************************************************************
do_eeprom_cmd:
mov edx, [io_addr] ; We only require the value in dx
add dx, 14 ; the value SCBeeprom
mov ax, EE_ENB
out dx, ax
call delay_us
mov ax, 0x4803 ; EE_ENB | EE_SHIFT_CLK
out dx, ax
call delay_us
; dx holds ee_addr
; ecx holds count
; eax holds cmd
xor edi, edi ; this will be the receive data
dec_001:
mov esi, 1
dec ecx
shl esi, cl
inc ecx
and esi, ebx
mov eax, EE_WRITE_0 ; I am assuming this doesnt affect the flags..
cmp esi,0
jz dec_002
mov eax, EE_WRITE_1
dec_002:
out dx, ax
call delay_us
or ax, EE_SHIFT_CLK
out dx, ax
call delay_us
shl edi,1
in ax, dx
and ax, EE_DATA_READ
cmp ax,0
jz dec_003
inc edi
dec_003:
loop dec_001
mov ax, EE_ENB
out dx, ax
call delay_us
mov ax, 0x4800
out dx, ax
call delay_us
mov eax, edi
ret
;***************************************************************************
; Function
; I8255x_reset
; Description
; Place the chip (ie, the ethernet card) into a virgin state
; No inputs
; All registers destroyed
;
;***************************************************************************
I8255x_reset:
ret
;***************************************************************************
; Function
; I8255x_probe
; Description
; Searches for an ethernet card, enables it and clears the rx buffer
; If a card was found, it enables the ethernet -> TCPIP link
;
;***************************************************************************
I8255x_probe:
mov eax, [io_addr]
mov ebx, [pci_bus]
mov ecx, [pci_dev]
mov edx, 0x04 ; PCI_COMMAND
call pcibios_read_config_word
or ax, 0x05
mov ebx, [pci_bus]
mov ecx, [pci_dev]
mov edx, 0x04 ; PCI_COMMAND
call pcibios_write_config_word
mov ebx, 0x6000000
mov ecx, 27
call do_eeprom_cmd
and eax, 0xffe0000
cmp eax, 0xffe0000
je bige
mov ebx, 0x1800000
mov ecx, 0x40
jmp doread
bige:
mov ebx, 0x6000000
mov ecx, 0x100
doread:
; do-eeprom-cmd will destroy all registers
; we have eesize in ecx
; read_cmd in ebx
; Ignore full eeprom - just load the mac address
mov ecx, 0
drlp:
push ecx ; save count
push ebx
mov eax, ecx
shl eax, 16
or ebx, eax
mov ecx, 27
call do_eeprom_cmd
pop ebx
pop ecx
mov edx, ecx
shl edx, 2
mov esi, eeprom_data
add esi, edx
mov [esi], eax
inc ecx
cmp ecx, 16
jne drlp
; OK, we have the MAC address.
; Now reset the card
mov edx, [io_addr]
add dx, 8 ; SCBPort
xor eax, eax ; The reset cmd == 0
out dx, eax
mov esi, 10
call delay_ms ; Give the card time to warm up.
mov eax, lstats
mov edx, [io_addr]
add edx, 4 ; SCBPointer
out dx, eax
mov eax, 0x0140 ; INT_MASK | CU_STATSADDR
mov edx, [io_addr]
add edx, 2 ; SCBCmd
out dx, ax
call wait_for_cmd_done
mov eax, 0
mov edx, [io_addr]
add edx, 4 ; SCBPointer
out dx, eax
mov eax, 0x0106 ; INT_MASK | RX_ADDR_LOAD
mov edx, [io_addr]
add edx, 2 ; SCBCmd
out dx, ax
call wait_for_cmd_done
; build rxrd structure
mov ax, 0x0001
mov [rxfd_status], ax
mov ax, 0x0000
mov [rxfd_command], ax
mov eax, rxfd_status
mov [rxfd_link], eax
mov eax, Ether_buffer
mov [rxfd_rx_buf_addr], eax
mov ax, 0
mov [rxfd_count], ax
mov ax, 1528
mov [rxfd_size], ax
mov edx, [io_addr]
add edx, 4 ; SCBPointer
mov eax, rxfd_status
out dx, eax
mov edx, [io_addr]
add edx, 2 ; SCBCmd
mov ax, 0x0101 ; INT_MASK | RX_START
out dx, ax
call wait_for_cmd_done
; start the reciver
mov ax, 0
mov [rxfd_status], ax
mov ax, 0xc000
mov [rxfd_command], ax
mov edx, [io_addr]
add edx, 4 ; SCBPointer
mov eax, rxfd_status
out dx, eax
mov edx, [io_addr]
add edx, 2 ; SCBCmd
mov ax, 0x0101 ; INT_MASK | RX_START
out dx, ax
; Init TX Stuff
mov edx, [io_addr]
add edx, 4 ; SCBPointer
mov eax, 0
out dx, eax
mov edx, [io_addr]
add edx, 2 ; SCBCmd
mov ax, 0x0160 ; INT_MASK | CU_CMD_BASE
out dx, ax
call wait_for_cmd_done
; Set TX Base address
; First, set up confcmd values
mov ax, 2
mov [confcmd_command], ax
mov eax, txfd
mov [confcmd_link], eax
mov ax, 1
mov [txfd_command], ax ; CmdIASetup
mov ax, 0
mov [txfd_status], ax
mov eax, confcmd
mov [txfd_link], eax
; ETH_ALEN is 6 bytes
mov esi, eeprom_data
mov edi, node_addr
mov ecx, 3
drp000:
mov eax, [esi]
mov [edi], al
shr eax, 8
inc edi
mov [edi], al
inc edi
add esi, 4
loop drp000
; Hard code your MAC address into node_addr at this point,
; If you cannot read the MAC address from the eeprom in the previous step.
; You also have to write the mac address into txfd_tx_desc_addr, rather
; than taking data from eeprom_data
mov esi, eeprom_data
mov edi, txfd_tx_desc_addr
mov ecx, 3
drp001:
mov eax, [esi]
mov [edi], al
shr eax, 8
inc edi
mov [edi], al
inc edi
add esi, 4
loop drp001
mov esi, eeprom_data + (6 * 4)
mov eax, [esi]
shr eax, 8
and eax, 0x3f
cmp eax, 4 ; DP83840
je drp002
cmp eax, 10 ; DP83840A
je drp002
jmp drp003
drp002:
mov ebx, [esi]
and ebx, 0x1f
push ebx
mov ecx, 23
call mdio_read
pop ebx
or eax, 0x0422
mov ecx, 23
mov edx, eax
call mdio_write
drp003:
mov ax, 0x4002 ; Cmdsuspend | CmdConfigure
mov [confcmd_command], ax
mov ax, 0
mov [confcmd_status], ax
mov eax, txfd
mov [confcmd_link], eax
mov ebx, confcmd_data
mov al, 0x88 ; fifo of 8 each
mov [ebx + 1], al
mov al, 0
mov [ebx + 4], al
mov al, 0x80
mov [ebx + 5], al
mov al, 0x48
mov [ebx + 15], al
mov al, 0x80
mov [ebx + 19], al
mov al, 0x05
mov [ebx + 21], al
mov eax, txfd
mov edx, [io_addr]
add edx, 4 ; SCBPointer
out dx, eax
mov eax, 0x0110 ; INT_MASK | CU_START
mov edx, [io_addr]
add edx, 2 ; SCBCmd
out dx, ax
call wait_for_cmd_done
jmp skip
; wait for thing to start
drp004:
mov ax, [txfd_status]
cmp ax, 0
je drp004
skip:
; Indicate that we have successfully reset the card
mov eax, [pci_data]
mov [eth_status], eax
I8255x_exit:
ret
;***************************************************************************
; Function
; I8255x_poll
;
; Description
; Polls the ethernet card for a received packet
; Received data, if any, ends up in Ether_buffer
;
;***************************************************************************
I8255x_poll:
mov ax, 0 ; assume no data
mov [eth_rx_data_len], ax
mov ax, [rxfd_status]
cmp ax, 0
je i8p_exit
mov ax, 0
mov [rxfd_status], ax
mov ax, 0xc000
mov [rxfd_command], ax
mov edx, [io_addr]
add edx, 4 ; SCBPointer
mov eax, rxfd_status
out dx, eax
mov edx, [io_addr]
add edx, 2 ; SCBCmd
mov ax, 0x0101 ; INT_MASK | RX_START
out dx, ax
call wait_for_cmd_done
mov esi, rxfd_packet
mov edi, Ether_buffer
mov ecx, 1518
cld
rep movsb
mov ax, [rxfd_count]
and ax, 0x3fff
mov [eth_rx_data_len], ax
i8p_exit:
ret
;***************************************************************************
; Function
; I8255x_transmit
;
; Description
; Transmits a packet of data via the ethernet card
; Pointer to 48 bit destination address in edi
; Type of packet in bx
; size of packet in ecx
; pointer to packet data in esi
;
;***************************************************************************
I8255x_transmit:
mov [hdr_type], bx
mov eax, [edi]
mov [hdr_dst_addr], eax
mov ax, [edi+4]
mov [hdr_dst_addr+4], ax
mov eax, [node_addr]
mov [hdr_src_addr], eax
mov ax, [node_addr+4]
mov [hdr_src_addr+4], ax
mov edx, [io_addr]
in ax, dx
and ax, 0xfc00
out dx, ax
xor ax, ax
mov [txfd_status], ax
mov ax, 0x400C ; Cmdsuspend | CmdTx | CmdTxFlex
mov [txfd_command], ax
mov eax, txfd
mov [txfd_link], eax
mov eax, 0x02208000
mov [txfd_count], eax
mov eax, txfd_tx_buf_addr0
mov [txfd_tx_desc_addr], eax
mov eax, hdr
mov [txfd_tx_buf_addr0], eax
mov eax, 14 ; sizeof hdr
mov [txfd_tx_buf_size0], eax
; Copy the buffer address and size in
mov eax, esi
mov [txfd_tx_buf_addr1], eax
mov eax, ecx
mov [txfd_tx_buf_size1], eax
mov eax, txfd
mov edx, [io_addr]
add edx, 4 ; SCBPointer
out dx, eax
mov ax, 0x0110 ; INT_MASK | CU_START
mov edx, [io_addr]
add edx, 2 ; SCBCmd
out dx, ax
call wait_for_cmd_done
mov edx, [io_addr]
in ax, dx
I8t_001:
mov ax, [txfd_status]
cmp ax, 0
je I8t_001
mov edx, [io_addr]
in ax, dx
ret
View Git Blame Copy Permalink