kolibrios-gitea/drivers/usb/usbhid/usbhid.asm

; standard driver stuff; version of driver model = 5
format PE DLL native 0.05
entry START

DEBUG = 1

; this is for DEBUGF macro from 'fdo.inc'
__DEBUG__ = 1
__DEBUG_LEVEL__ = 1

include '../../struct.inc'

; Compile-time settings.
; If set, the code will dump all descriptors as they are read to the debug board.
USB_DUMP_DESCRIPTORS = 1
; If set, the code will dump any unclaimed input to the debug board.
HID_DUMP_UNCLAIMED = 1

; USB constants
DEVICE_DESCR_TYPE           = 1
CONFIG_DESCR_TYPE           = 2
STRING_DESCR_TYPE           = 3
INTERFACE_DESCR_TYPE        = 4
ENDPOINT_DESCR_TYPE         = 5
DEVICE_QUALIFIER_DESCR_TYPE = 6

CONTROL_PIPE     = 0
ISOCHRONOUS_PIPE = 1
BULK_PIPE        = 2
INTERRUPT_PIPE   = 3

; USB HID constants
HID_DESCR_TYPE      = 21h
REPORT_DESCR_TYPE   = 22h
PHYSICAL_DESCR_TYPE = 23h

; USB structures
struct config_descr
bLength                 db      ?
bDescriptorType         db      ?
wTotalLength            dw      ?
bNumInterfaces          db      ?
bConfigurationValue     db      ?
iConfiguration          db      ?
bmAttributes            db      ?
bMaxPower               db      ?
ends

struct interface_descr
bLength                 db      ?
bDescriptorType         db      ?
bInterfaceNumber        db      ?
bAlternateSetting       db      ?
bNumEndpoints           db      ?
bInterfaceClass         db      ?
bInterfaceSubClass      db      ?
bInterfaceProtocol      db      ?
iInterface              db      ?
ends

struct endpoint_descr
bLength                 db      ?
bDescriptorType         db      ?
bEndpointAddress        db      ?
bmAttributes            db      ?
wMaxPacketSize          dw      ?
bInterval               db      ?
ends

; USB HID structures
struct hid_descr
bLength                 db      ?
bDescriptorType         db      ?
bcdHID                  dw      ?
bCountryCode            db      ?
bNumDescriptors         db      ?
base_sizeof     rb      0
; now two fields are repeated .bNumDescriptors times:
subDescriptorType       db      ?
subDescriptorLength     dw      ?
ends

; Include macro for parsing report descriptors/data.
macro workers_globals
{}
include 'report.inc'

; Driver data for all devices
struct usb_device_data
hid                     hid_data        ; data of HID layer
epdescr                 dd      ?       ; endpoint descriptor
hiddescr                dd      ?       ; HID descriptor
interface_number        dd      ?       ; copy of interface_descr.bInterfaceNumber
configpipe              dd      ?       ; config pipe handle
intpipe                 dd      ?       ; interrupt pipe handle
input_transfer_size     dd      ?       ; input transfer size
input_buffer            dd      ?       ; buffer for input transfers
control                 rb      8       ; control packet to device
ends

section '.flat' code readable writable executable
include '../../macros.inc'
include '../../proc32.inc'
include '../../peimport.inc'
include '../../fdo.inc'
; The start procedure.
proc START
virtual at esp
        dd      ?       ; return address
.reason dd      ?
.cmdline dd     ?
end virtual
; 1. Test whether the procedure is called with the argument DRV_ENTRY.
; If not, return 0.
        xor     eax, eax        ; initialize return value
        cmp     [.reason], 1    ; compare the argument
        jnz     .nothing
; 2. Register self as a USB driver.
; The name is my_driver = 'usbhid'; IOCTL interface is not supported;
; usb_functions is an offset of a structure with callback functions.
        invoke  RegUSBDriver, my_driver, eax, usb_functions
; 3. Return the returned value of RegUSBDriver.
.nothing:
        ret
endp

; This procedure is called when new HID device is detected.
; It initializes the device.
proc AddDevice
        push    ebx esi edi     ; save used registers to be stdcall
virtual at esp
                rd      3       ; saved registers
                dd      ?       ; return address
.config_pipe    dd      ?
.config_descr   dd      ?
.interface      dd      ?
end virtual
        DEBUGF 1,'K : USB HID device detected\n'
; 1. Allocate memory for device data.
        movi    eax, sizeof.usb_device_data
        invoke  Kmalloc
        test    eax, eax
        jnz     @f
        mov     esi, nomemory_msg
        invoke  SysMsgBoardStr
        jmp     .return0
@@:
; zero-initialize it
        mov     edi, eax
        xchg    eax, ebx
        xor     eax, eax
        movi    ecx, sizeof.usb_device_data / 4
        rep stosd
        mov     edx, [.interface]
; HID devices use one IN interrupt endpoint for polling the device
; and an optional OUT interrupt endpoint. We do not use the later,
; but must locate the first. Look for the IN interrupt endpoint.
; Also, look for the HID descriptor; according to HID spec, it must be
; located before endpoint descriptors.
; 2. Get the upper bound of all descriptors' data.
        mov     eax, [.config_descr]
        movzx   ecx, [eax+config_descr.wTotalLength]
        add     eax, ecx
; 3. Loop over all descriptors until
; either end-of-data reached - this is fail
; or interface descriptor found - this is fail, all further data
;    correspond to that interface
; or endpoint descriptor for IN endpoint is found
; (HID descriptor must be located before the endpoint descriptor).
; 3a. Loop start: edx points to the interface descriptor.
.lookep:
; 3b. Get next descriptor.
        movzx   ecx, byte [edx] ; the first byte of all descriptors is length
        test    ecx, ecx
        jz      .cfgerror
        add     edx, ecx
; 3c. Check that at least two bytes are readable. The opposite is an error.
        inc     edx
        cmp     edx, eax
        jae     .cfgerror
        dec     edx
; 3d. Check that this descriptor is not interface descriptor. The opposite is
; an error.
        cmp     [edx+endpoint_descr.bDescriptorType], INTERFACE_DESCR_TYPE
        jz      .cfgerror
; 3e. For HID descriptor, proceed to 4.
; For endpoint descriptor, go to 5.
; For other descriptors, continue the loop.
; Note: bDescriptorType is in the same place in all descriptors.
        cmp     [edx+endpoint_descr.bDescriptorType], ENDPOINT_DESCR_TYPE
        jz      .foundep
        cmp     [edx+endpoint_descr.bDescriptorType], HID_DESCR_TYPE
        jnz     .lookep
; 4a. Check that the descriptor contains all required data and all data are
; readable. The opposite is an error.
        movzx   ecx, [edx+hid_descr.bLength]
        cmp     ecx, hid_descr.base_sizeof + 3
        jb      .cfgerror
        add     ecx, edx
        cmp     ecx, eax
        ja      .cfgerror
; 4b. Store the pointer in usb_device_data structure for further references.
        mov     [ebx+usb_device_data.hiddescr], edx
; 4c. Continue the loop.
        jmp     .lookep
.foundep:
; 5a. Check that the descriptor contains all required data and all data are
; readable. The opposite is an error.
        cmp     byte [edx+endpoint_descr.bLength], sizeof.endpoint_descr
        jb      .cfgerror
        lea     ecx, [edx+sizeof.endpoint_descr]
        cmp     ecx, eax
        jbe     @f
; 6. An error occured during processing endpoint descriptor.
.cfgerror:
; 6a. Print a message.
        mov     esi, invalid_config_descr_msg
        invoke  SysMsgBoardStr
; 6b. Free memory allocated for device data.
.free:
        xchg    eax, ebx
        invoke  Kfree
.return0:
; 6c. Return an error.
        xor     eax, eax
.nothing:
        pop     edi esi ebx     ; restore used registers to be stdcall
        ret     12
@@:
; 5b. If this is not IN interrupt endpoint, ignore it and continue the loop.
        test    [edx+endpoint_descr.bEndpointAddress], 80h
        jz      .lookep
        mov     cl, [edx+endpoint_descr.bmAttributes]
        and     cl, 3
        cmp     cl, INTERRUPT_PIPE
        jnz     .lookep
; 5c. Store the pointer in usb_device_data structure for futher references.
        mov     [ebx+usb_device_data.epdescr], edx
; 5d. Check that HID descriptor was found. If not, go to 6.
        cmp     [ebx+usb_device_data.hiddescr], 0
        jz      .cfgerror
.descriptors_found:
; 6. Configuration descriptor seems to be ok.
; Send SET_IDLE command disabling auto-repeat feature (it is quite useless)
; and continue configuring in SET_IDLE callback.
        lea     edx, [ebx+usb_device_data.control]
        mov     eax, [.interface]
        mov     dword [edx], 21h + \    ; Class-specific request to Interface
                (0Ah shl 8) + \         ; SET_IDLE
                (0 shl 16) + \          ; apply to all input reports
                (0 shl 24)              ; disable auto-repeat
        movzx   eax, [eax+interface_descr.bInterfaceNumber]
        mov     [ebx+usb_device_data.interface_number], eax
        mov     [edx+4], eax            ; set interface number, zero length
        mov     eax, [.config_pipe]
        mov     [ebx+usb_device_data.configpipe], eax
        xor     ecx, ecx
        invoke  USBControlTransferAsync, eax, edx, ecx, ecx, idle_set, ebx, ecx
; 7. Return pointer to usb_device_data.
        xchg    eax, ebx
        jmp     .nothing
endp

; This procedure is called by USB stack when SET_IDLE request initiated by
; AddDevice is completed, either successfully or unsuccessfully.
proc idle_set
        push    ebx esi         ; save used registers to be stdcall
virtual at esp
                rd      2       ; saved registers
                dd      ?       ; return address
.pipe           dd      ?
.status         dd      ?
.buffer         dd      ?
.length         dd      ?
.calldata       dd      ?
end virtual
; Ignore status. Support for SET_IDLE is optional, so the device is free to
; STALL the request; config pipe should remain functional without explicit cleanup.
        mov     ebx, [.calldata]
; 1. HID descriptor contains length of Report descriptor. Parse it.
        mov     esi, [ebx+usb_device_data.hiddescr]
        movzx   ecx, [esi+hid_descr.bNumDescriptors]
        lea     eax, [hid_descr.base_sizeof+ecx*3]
        cmp     eax, 100h
        jae     .cfgerror
        cmp     al, [esi+hid_descr.bLength]
        jb      .cfgerror
.look_report:
        dec     ecx
        js      .cfgerror
        cmp     [esi+hid_descr.subDescriptorType], REPORT_DESCR_TYPE
        jz      .found_report
        add     esi, 3
        jmp     .look_report
.cfgerror:
        mov     esi, invalid_config_descr_msg
.abort_with_msg:
        invoke  SysMsgBoardStr
        jmp     .nothing
.found_report:
; 2. Send request for the Report descriptor.
; 2a. Allocate memory.
        movzx   eax, [esi+hid_descr.subDescriptorLength]
        test    eax, eax
        jz      .cfgerror
        push    eax
        invoke  Kmalloc
        pop     ecx
; If failed, say a message and stop initialization.
        mov     esi, nomemory_msg
        test    eax, eax
        jz      .abort_with_msg
; 2b. Submit the request.
        xchg    eax, esi
        lea     edx, [ebx+usb_device_data.control]
        mov     eax, [ebx+usb_device_data.interface_number]
        mov     dword [edx], 81h + \    ; Standard request to Interface
                (6 shl 8) + \           ; GET_DESCRIPTOR
                (0 shl 16) + \          ; descriptor index: there is only one report descriptor
                (REPORT_DESCR_TYPE shl 24); descriptor type
        mov     [edx+4], ax             ; Interface number
        mov     [edx+6], cx             ; descriptor length
        invoke  USBControlTransferAsync, [ebx+usb_device_data.configpipe], \
                edx, esi, ecx, got_report, ebx, 0
; 2c. If failed, free the buffer and stop initialization.
        test    eax, eax
        jnz     .nothing
        xchg    eax, esi
        invoke  Kfree
.nothing:
        pop     esi ebx         ; restore used registers to be stdcall
        ret     20
endp

; This procedure is called by USB stack when the report descriptor queried
; by idle_set is completed, either successfully or unsuccessfully.
proc got_report stdcall uses ebx esi edi, pipe, status, buffer, length, calldata
locals
parse_descr_locals
if ~HID_DUMP_UNCLAIMED
has_driver      db      ?
                rb      3
end if
endl
; 1. Check the status; if the request has failed, say something to the debug board
; and stop initialization.
        cmp     [status], 0
        jnz     .generic_fail
; 2. Subtract size of setup packet from the total length;
; the rest is length of the descriptor, and it must be nonzero.
        sub     [length], 8
        ja      .has_something
.generic_fail:
        push    esi
        mov     esi, reportfail
        invoke  SysMsgBoardStr
        pop     esi
        jmp     .exit
.has_something:
; 3. Process descriptor.
; 3a. Dump it to the debug board, if enabled in compile-time setting.
if USB_DUMP_DESCRIPTORS
        mov     eax, [buffer]
        mov     ecx, [length]
        DEBUGF 1,'K : report descriptor:'
@@:
        DEBUGF 1,' %x',[eax]:2
        inc     eax
        dec     ecx
        jnz     @b
        DEBUGF 1,'\n'
end if
; 3b. Call the HID layer.
        parse_descr
        cmp     [report_ok], 0
        jz      got_report.exit
        mov     ebx, [calldata]
        postprocess_descr
; 4. Stop initialization if no driver is assigned.
if ~HID_DUMP_UNCLAIMED
        cmp     [has_driver], 0
        jz      got_report.exit
end if
; 5. Open interrupt IN pipe. If failed, stop initialization.
        mov     edx, [ebx+usb_device_data.epdescr]
        movzx   ecx, [edx+endpoint_descr.bEndpointAddress]
        movzx   eax, [edx+endpoint_descr.bInterval]
        movzx   edx, [edx+endpoint_descr.wMaxPacketSize]
        invoke  USBOpenPipe, [ebx+usb_device_data.configpipe], ecx, edx, INTERRUPT_PIPE, eax
        test    eax, eax
        jz      got_report.exit
        mov     [ebx+usb_device_data.intpipe], eax
; 6. Initialize buffer for input packet.
; 6a. Find the length of input packet.
; This is the maximal length of all input reports.
        mov     edx, [ebx+usb_device_data.hid.input.first_report]
        xor     eax, eax
.find_input_size:
        test    edx, edx
        jz      .found_input_size
        cmp     eax, [edx+report.size]
        jae     @f
        mov     eax, [edx+report.size]
@@:
        mov     edx, [edx+report.next]
        jmp     .find_input_size
.found_input_size:
; report.size is in bits, transform it to bytes
        add     eax, 7
        shr     eax, 3
; if reports are numbered, the first byte is report ID, include it
        cmp     [ebx+usb_device_data.hid.input.numbered], 0
        jz      @f
        inc     eax
@@:
        mov     [ebx+usb_device_data.input_transfer_size], eax
; 6b. Allocate memory for input packet: dword-align and add additional dword
; for extract_field_value.
        add     eax, 4+3
        and     eax, not 3
        invoke  Kmalloc
        test    eax, eax
        jnz     @f
        mov     esi, nomemory_msg
        invoke  SysMsgBoardStr
        jmp     got_report.exit
@@:
        mov     [ebx+usb_device_data.input_buffer], eax
; 7. Submit a request for input packet and wait for input.
        call    ask_for_input
got_report.exit:
        mov     eax, [buffer]
        invoke  Kfree
        ret
endp

; Helper procedure for got_report and got_input.
; Submits a request for the next input packet.
proc ask_for_input
; just call USBNormalTransferAsync with correct parameters,
; allow short packets
        invoke  USBNormalTransferAsync, \
                [ebx+usb_device_data.intpipe], \
                [ebx+usb_device_data.input_buffer], \
                [ebx+usb_device_data.input_transfer_size], \
                got_input, ebx, \
                1
        ret
endp

; This procedure is called by USB stack when a HID device responds with input
; data packet.
proc got_input stdcall uses ebx esi edi, pipe, status, buffer, length, calldata
locals
parse_input_locals
endl
; 1. Validate parameters: fail on error, ignore zero-length transfers.
        mov     ebx, [calldata]
        cmp     [status], 0
        jnz     .fail
        cmp     [length], 0
        jz      .done
; 2. Get pointer to report in esi.
; 2a. If there are no report IDs, use hid.input.data.
        mov     eax, [buffer]
        mov     esi, [ebx+usb_device_data.hid.input.data]
        cmp     [ebx+usb_device_data.hid.input.numbered], 0
        jz      .report_found
; 2b. Otherwise, the first byte of report is report ID;
; locate the report by its ID, advance buffer+length to one byte.
        movzx   eax, byte [eax]
        mov     esi, [esi+eax*4]
        inc     [buffer]
        dec     [length]
.report_found:
; 3. Validate: ignore transfers with unregistered report IDs
; and transfers which are too short for the corresponding report.
        test    esi, esi
        jz      .done
        mov     eax, [esi+report.size]
        add     eax, 7
        shr     eax, 3
        cmp     eax, [length]
        ja      .done
; 4. Pass everything to HID layer.
        parse_input
.done:
; 5. Query the next input.
        mov     ebx, [calldata]
        call    ask_for_input
.nothing:
        ret
.fail:
        mov     esi, transfer_error_msg
        invoke  SysMsgBoardStr
        jmp     .nothing
endp

; This function is called by the USB subsystem when a device is disconnected.
proc DeviceDisconnected
        push    ebx esi edi     ; save used registers to be stdcall
virtual at esp
                rd      3       ; saved registers
                dd      ?       ; return address
.device_data    dd      ?
end virtual
; 1. Say a message.
        mov     ebx, [.device_data]
        mov     esi, disconnectmsg
        invoke  SysMsgBoardStr
; 2. Ask HID layer to release all HID-related resources.
        hid_cleanup
; 3. Free the device data.
        xchg    eax, ebx
        invoke  Kfree
; 4. Return.
.nothing:
        pop     edi esi ebx     ; restore used registers to be stdcall
        ret     4       ; purge one dword argument to be stdcall
endp

include 'sort.inc'
include 'unclaimed.inc'
include 'mouse.inc'
include 'keyboard.inc'
include 'multimedia.inc'

; strings
my_driver       db      'usbhid',0
nomemory_msg    db      'K : no memory',13,10,0
invalid_config_descr_msg db 'K : invalid config descriptor',13,10,0
reportfail      db      'K : failed to read report descriptor',13,10,0
transfer_error_msg db   'K : USB transfer error, disabling HID device',13,10,0
disconnectmsg   db      'K : USB HID device disconnected',13,10,0
invalid_report_msg db   'K : report descriptor is invalid',13,10,0
delimiter_note  db      'K : note: alternate usage ignored',13,10,0

align 4
; Structure with callback functions.
usb_functions:
        dd      12
        dd      AddDevice
        dd      DeviceDisconnected

; for DEBUGF macro
include_debug_strings

; Workers data
workers_globals

align 4
data fixups
end data